Costing issue-Why Info record price is not read ?

Hi,
We have an issue while costing a Material procured externally.
Valuation Variant >>> Priority 1-Info record price. >>Priority 2-Material Master valuation price.
However, system is picking the price matained in the Material master.
I have verified the validity of the info record and the Blocks on the Vendor and seems ok.
Are there any specific checks need to carry out to know if the info record is a valid one.
Any idea why system is picking Price from Material Master?
Your help is appreciated.
Kind Regards
Umapathi G

HI Umapathi
Does any scheduling agreement exists for this info record
refer this link.. This issue is pretty common these days and has been discussed many times in the forum
CK11N- Material cost estimate with & without agreement
Regards
Ajay M

Similar Messages

  • Adopted Info record price should not be changed in PO

    Dear All
    I do have a requirement that, my company wants to maintain info records for each vendor price combination, and wants user should not change adopted prices/conditions etc in PO while creating the PO.
    Can this be possible without doing any ABAP coding using BADI?
    Thank you

    HI,
    Its possible by MM configuration in Condition type ( PBXX or PB00).
    What u want to do is In the conition type T.Code :M/06
    Under the Changes wich can be made tab, thaer is
    Manual entries  , Plz give' D'     in the tab , that means manual entries not possible.
    Hope it clear,
    Regards,
    Andra

  • Why Info record net price is 0

    info record price is 20hkd/1pc in the past peried. as the price change, i have create a new price in current peried and save it(price is not 0). when i use me12 again and find  organazation data view price is 0. and click the condion but the price is not 0,
    notes  685117  suggest use report RM06INP0 to Solution
    in current peried  why happen this issue?

    Hi,
    The price in the info record (EINE-NETPR) does not always agree with the price that is taken from the info record when creating a purchase order. The most common cause is that the condition was updated by condition maintenance. This will not translate into a direct update of the net price in ME13 (display info record). If you want the net price to show exactly as the info record condition, then schedule report/program RM06INP0. This will do an update routine and synchronize prices.
    Regards
    Govind

  • Costing based on info records

    Hi experts,
    We are facing problems setting up costing based on info records. In our valuation variant we use Strategy Sequence "Price from Purchasing Info Record" and Sub-Strategy Sequence "Quotation Price via Condition Table", as well as stating the relevant Condition type in Delivery Costs.
    The price of the material and condition type is set in transaction MEK3.
    The costing works as it should, but only if no purchasing requisitions exists on the material. But if requisitions exists on the material, the costing instead use this price. How to avoid that; i.e. how to make the costing always picking the price set in transaction MEK3?
    BR,
    Niclas

    Hi
    I cant say for sure.. you can download these notes from T CODE SNOTE...
    After getting downloaded, an icon shows on left side based on which you will come to know if it can be applied or not...
    Else, you can raise a OSS msg to SAP saying that this note seems to be relevant to my issue, but does not match with my release of SAP... They will get back to you, if they have any
    Regards
    Ajay M

  • Info Record price wrt inco terms

    Hi
    The current scenario is that the info record price maintainance is mandatory.
    However in a scenario that is import there are prices based on the inco terms.
    Is this possible? For eg Price when CIF is 100 and when FOB is 90 for the same material vendor purch org combination
    Thanks
    Rahul

    Hi
    Yes this is possible, if you need to determine your price based on the Incoterms then you need to maintain the condition records accordingly.
    Maintain the condition records with the key combination containing the Incoterms.
    If you do not have any key combination then you createa  new condition table and assign it to the access sequence and then you can create the condition records.
    Configuration steps are in the Price determination process in Purchasing
    Thanks & Regards
    Kishore

  • Automatically update of the info record price conditions from last purchase

    Dear.
    I need to massive update the info record price conditions from the last purchase order price for a list of materials.
    Does exist a standard transaction where I can I do this ?
    Thanks.

    hi,
    Yeah, I just checked it..
    Its not possible in Std. SAP system...
    There is no field provided for the same...
    the other way, but doesn't applies to you...as you are doing massive job...
    still if req. then check..
    The other way is:
    Maintain Quotation and ref. it in inforecord...price gets updated easily from it...
    Regards
    Priyanka.P

  • Fetch Info Record price from ECC 6.0 and print on Consignment Contract form

    Hi, we need to fetch the info record price from ecc 6.0 and print it on the consignment contract form. the system for using consignment contracts is not designed yet. once it is designed the consignment contracts would be created in the srm system. we're using srm 5.0 and using extended classic scenario. currently the purchase contracts are being created directly in the srm system. someone plz help me with this.

    knock knock...anyone here? plz help me.

  • How to update info record price in to material master as a standard price -

    Hi Experts,
    We have a client requirement as below:
    Client wants to compare the info record price per material for all related vendors.
    Once he arrives at the best effective price (Material Price + Freight + Duty), he would want this price to update in the Material Master Record as Standard price.
    I know we can use MR21 and LSMW to update this manually but we are looking to automate this process as we have more than 100,000 records in the system.
    Can the above requirement be addressed through CK40N? if yes, How?
    Thanks,
    Jammy

    Hi Jammy
    Usually, in std SAP, if there are multiple condition records, the one with lowest price is considered by the system in CK11N/CK40N
    Configure your valuation variant to pick up price from info record... As far as I remember, the one with lowest price would get picked up when you do costing run...
    however, if your requirement is bit different than this, but is based on a logic which can be configured in the system, then use Valuation Strategy U in your Valuation Variant and write your code accordingly in the exit COPCP005 (Component EXIT_SAPLCK21_002.)
    Regards
    Ajay M

  • Update info record price

    Hello,
    We have requirement to update 2 info record prices based on qty irrespective of validity .i.e.
    the first supply of 100 qty will at price u201CXu201D and there after the price will be u201CYu201D.
    How do we maintain info record ?

    Dear All,
    After supply of 100 nos, we will release order which may be less the 100 and the system should pick up Y price.
    Scales will not help our requirement.

  • Update info record price, when changing contract price

    Hi
    In the SAP OSS 569885  it is precised clearly:
    If an info record already exists, upon creation or change of
    a contract, neither price nor conditions are updated in the info
    record.
    So, my question is:
      Is there any way to update info records  prices upon a contract change or creation .
    thank you in advance for your support

    the info record is a kind of general, means it has the general price. A contract is an agreement for a certain quantity and price and period that may have a price that you can only get from your vendor  with this kind of agreement. So it is not really logical to have the contract price in the info record, too.
    There is no way to get this update automatically.

  • Info record Po text not printing in Po

    Hi all,
             Info record po text not printing in po print out. Info record po text showing in po at item level but it was not printing in po. In info record No matl text checked. In material master no text maintained. please help on this
             Thanks in advance for your help

    Hi Mahesh,
    Follow the path:
    SPRO--> MM --> Purchasing --> Messages --> Texts for Messages ---> Define texts for Purchase Order
    Double click on "Texts for Document Item" under Dialog Structure
    Click on new entries and then Fill the following fields:
    Pur. Doc. Category: Purchase Order
    Print Operation: New
    Doc. Type: NB
    Item Category: Standard
    Text Object: Purchasing Doc. Item texts (EKPO)
    Text Id: Info Record PO Text (F02)
    Print Sequence: 2
    Print Priority: 1
    and then Save
    Hope this helps
    Thanks,
    Ankur

  • Fixed vendor Info record price report

    Hi,
    Is there any SAP report which can only show me the current info record price for multiple materials for their respective fixed vendors?
    Sincerely,
    Puja

    Hi Pooja,
    You can try ME1P transaction.
    Cheers,
    SAtish Purandare

  • Info Record Price

    Hi !!
    My PO is of date 01.01.2010 & now I changed Info record price from date 01.01.2010 & today is 10.04.2010,but how this will be changed in PO.

    Hi,
    Open Po in change mode go to conditions and then click on update select B Carry out new pricing.
    Thanks and regards,
    Amol S. Arote.

  • No valid info record price when creating PO

    When I created a PO with an info record, but no valid price for the date, the system used the most current PO to price the new PO.
    Is there a way to have the system give a warning message that there is no valid info record price?

    Rahim
    I made the change to the setting and it did return a warning for NO info record.  But the second time I used the material/vendor, there was no warning theat there was no valid info record price
    The PO just used the price from the previous PO with no message about the source.
    How would a buyer know that he needs to go "do something" about an info record price?
    thanks for you help
    Althea

  • Info record price should be Mandatory in PO.

    Hi Experts,
    I wanna to do Info Record Price mandatory while creating PO.
    System should give Error Message if the price in PO & Info Record Differs?
    How it is possible?
    Thanks in advance.

    Hi ,
    As jurgen suggests , you could do with exits.
    If there is possibilty for you to change the pricing schema.
    Then have a schema which has only PB00  condition with access restricted to Info record only. This might create a situation where price amendments can be done only with info record and PO's created will always have the pricing in sync with info record.
    Correct me if my thinking is wrong.
    Harish

Maybe you are looking for

  • Updated my Macbook Air to Yosemite and now IMessage won't open pictures

    I updated my Macbook Air to Yosemite a few days ago and since then IMessage has been acting up. It won't let open pictures now. A picture comes through titled "IMG_2882" but when I click on it, it comes up with a description of the image - the type o

  • Simulating Multiple Inheritance in Java

    Problem: I am trying to obfuscate code and create wrapper classes to access code implementation. Problem is that some parameters in methods have different types. (i.e. public class Example{ ExampleImpl exampleImpl; public void setExample(Problem exam

  • 500 Internal server error - java.lang.NullPointerException: null

    While trying to access the initial login screen of EP, we face this '500 Internal server error - java.lang.NullPointerException: null' issue very randomly. It appears sometimes and when opened from new browser we get the login screen sometimes. It is

  • Embedded Quote in an SQL Statement

    How do you embed a double quote in a java string? I'm doing some processing where I need to generate and execute some SQL, but I need to wrap the string in double quotes, something like: select sysdate "My Column Header" from dual; I've been using th

  • Re-installing windows 7 on new hard drive

    Hi  The hard drive failed on my hp pavilion p6-2180ea, 4 months out of warranty. I've replaced the hard drive myself but my pc never came with a windows 7 installation disc, I have the product key on a label on the machine,  can download or aquire th