Costing views in Master data

Hi Guys,
i need your suggestion.
my customer opened erroneosuly the costing views for several materials. i know that the views cannot be eliminated so if i flag the "do not cost" the material won't be taken in count during cost estimation right?
thanks
C.

Hi,
If you select the don't cost check box, that material won't take for material cost estimate.
Regards
Srinu

Similar Messages

  • Item Cost in inventory master data

    Hi all,
              Ive created an Item say XYZ in Inventory masterdata ( Created on 01/01/2008). There was no Item Cost when I created this.  And Ive posted many Production Order documents with this Item XYZ. Now when I raise Production Order On this Item, Disassembly Order- Planned & Released.
               Ill go to Issue for Prodiction Screen and select the Disassembly oder and Issue this Order. When I go back to this Issue for production screen what Ive Issued, This is showing Item Cost which I didnot fed in Production order screen/ Issue for Production screen.
               Ive checked in Item Masterdata of XYZ Item. There also Item Cost is shown, which I didnt fed in to the system. And this Item Cost is changing. When I raise Production Orders and Issuing them, I saw this Item Cost Increasing.
              I dont want this Item Cost effect in Issue for production. And plzz let me know what is the reason for changing this Item cost in Master data.
    Thanks In Advance.
    Sree.

    Hi Sree,
    you could bring the stock level & therefore the stock value down to zero, then change the valuation method to 'Standard' & assign a standard item cost of 0.00. That implies however that you must allow stock release without item cost. Please note that you need to remove this item from any BOMs as well before you can change this data.
    As with all standard cost items, if you buy this item for anything different from 0.00, the difference will be posted to the price differences account defined for this item. Your accountant might need to make adjustments to account for that.
    All the best,
    Kerstin

  • Maintain penalty costs in product master data via macro

    Hi all,
    I am trying to use the function MATLOC_SET to maintain the penalty cost (field Non. Del. Penalty) on SNP1 tab, but it didn't work.
    Is it possible to use this function to update this field or I need to use an other function to do this?
    I tried :
    1) MATLOC_SET( 'NDPEN' ; 123 ; ACT_PRODUCT ; ACT_LOCATION ; ACT_VERSION )
    2) MATLOC_SET( 'NDPEN' ; '123' ; ACT_PRODUCT ; ACT_LOCATION ; ACT_VERSION )
    3) MATLOC_SET( 'NDPEN1LOC' ; 123 ; ACT_PRODUCT ; ACT_LOCATION ; ACT_VERSION )
    4) MATLOC_SET( 'NDPEN1LOC' ; '123' ; ACT_PRODUCT ; ACT_LOCATION ; ACT_VERSION )
    Thanks in advance,
    Regards,
    Douglas Marques

    Thanks all for replies!
    Kishore Reddy,
    Yes, it's possible to maintain product master data via macro by functions. In my case, I'm using MATLOC_SET and it's work fine... except for the penalty costs fields.
    Saradha,
    I can't use the MASSD to do this because the costs are calculated in the macro based on sku/location forecast. But call a custom program in the macro is a good idea. I only have a doubt... Is it possible to transfer the calculated values in the macro to the custom program? If it's possible, how can I do to call the custom program transferring these values?
    Julien,
    The function MATLOC_SET works fine for other fields, only doesn't work to penalty costs fields...  
    I saw that the structures are different, but the help that provides by SAP not mention any restriction. So, I think there is some other specific function to update the costs and i tried the MATLOC_EXTRA_SET, but it updates only extra fields...  
    May be having another function to do this...
    Thanks and Regards
    Doug

  • Photo View in Master Data

    Hi,
    I know the basic procedure and i have upload the photo but I am able to see in the infotypes but i am unable to see in PA30 in Master Data .
    So please let me know if u have specific settings for the same .
    Thanks
    Mag

    hi Mag
    Please follow the following instructions to link an employee photo to your infotype header.
    1. The pictures (.jpg or .bmp) must be available on your PC.
    2. Start transaction OAAD.
    3. Choose function 'documents -> create'
    4. Choose as business object 'PREL' and as document type 'HRICOLFOTO'
    5. Push the create button
    6. Fill in the appropriate personnel number
    This solution requires SAP Archivelink to be installed.
    For further clarfication, please refer to the note 488281
    Regards
    Jun

  • Views in master data

    Hi,
    How can I hide/supress/madatory some fileds and tab pages in customer master data and material master data? Pls advise me the t-code or menu path.
    Regards,
    Student

    Hi,
    Menu Path:- Spro --> Logistic General --> Business Partner --> Customers --> Control -->
    Here Define Account Groups and Field Selection for Customers.
    Select your Account Group --> Click on Details , Here in Field Status,
    We will be having the General Data , Company Code Data and Sales Data.
    Goto respective Data --> Here in Select Group and Double Click on E.g:- Adress
    Here you will be having the Options like Supress , Req Entry, Optional and Display.
    Here you can do the necessary requirement.
    Please follow the below path for Material Master
    Spro --> Logistic General --> Field Selection --> Maintain Field Selection for Data Screens.
    Hope this solves your purpose and Please Reward If Really Helpful,
    Thanks and Regards,
    Sateesh.Kandula

  • BW Master data delta generic data source for further update in BW

    Hi BWers,
    I am looking for an option to load delta from Master data to another master data within BW. Export data source option for master data only has full load option but no delta update possible.
    I tried creating generic data source delta enabled on view of master data (/BI/M). But the problem I am facing now is master data contains quantity field as attribute and this field refers another table RSDKYF for unit. To be able to create data source on view / table no field should refer field in another table.
    Did anybody create delta for master data for further loading within BW or came across similar issue with key figures, please let me know the best procedure in this scenario? Appreciate your quick response.
    Regards,
    Madhav

    In your master data attribute have a date field which will be filled by the R/3 load as sy-datum - then create an export datasource and in the infopackage - give a selectoion for the date field as sy-datum and sy-datum -1..
    Not exactly a delta but then usually master data is not kept as delta because the volumes are usually less - you can achieve delta by this method...

  • Help needed please -Master data loading- error with text loading.

    Hi,
    Iam S.Sushma. Iam getting error while loading master data from flat file- attributes and texts.
    I have loaded attribute data successfully. But when iam monitoring the text data then iam getting following error.
    ""SET THE LANGUAGE FIELD IN THE SOURCE SYSTEM-LONG TEXT.""
    ""RECORD1: SRPID_1:DATA RECORD 1(EN S):DUPLICATE DATA RECORD.
    "ERROR 4 IN UPDATE"
    I took 2flat files for attributes and texts.
    SRPID is key field.(sales representative id)
    attributes:- SRPID, NAME1, AGE1, ADD1,PHONE1.
    text:-  SRPID,LANG,SHTXT,MDTXT,LGTXT.
    Iam just a begginer so need your guidence. Thank you in advance.
    Message was edited by: sushma sandepogu
    Message was edited by: sushma sandepogu

    Hi Eugene,
    Thank you for your guidence. I have changed the order in flat file and got the results successfully. But when iam viewing the Master data text the S10 in coming in 2nd position  in maintain master data-list screen i mean :-
    SRPID LANG NAME AGE ADD PHONE SHTXT MDTXT LGTXT
    S1         EN  ABC   34  GDS 1234  AS    ASD   ASDDF
    S10
    S2
    S3
    S9.
    Iam not understading why. Hope yu can help me. I have assigned full points to you for your previous solution.
    Thank you in advance.
    S.Sushma.

  • Master Data Cannot Be Maintained

    Dear All
    I want to view the Master Data for the standard Object.
    But when i right click the object and click on Maintain Master Data it gives the following error:-
    "Master data cannot be maintained for characteristic 0CRMPROD_ID."
    Please guide me on this.

    Hi Anup Chaudhari ,
    Did u load master data into that Infoobject.
    First load the master data using Infopackage after that you can check the master data by using
    Right click ---> maintain master data.
    Second thing is:
    Is there any lock message if it is check the attribute change run job once.
    Thanks,
    Kiran Manyam

  • Hi,master  data tables and SID's

    Hi,
    Where and how we will find the master data tables and SID tables?I am going to se16 and checking there but i am not able to see there in which table these are located or stored?
    Thank you,
    Sekhar..

    >
    chandra sekhar wrote:
    > Hi,
    > Where and how we will find the master data tables and SID tables?I am going to se16 and checking there but i am not able to see there in which table these are located or stored?
    > Thank you,
    > Sekhar..
    Assuming the infoObject name is ZINFOOBJECT.
    The tables are :-
    /BIC/MZINFOOBJECT       View of Master Data  Tables: Characteristic
    /BIC/PZINFOOBJECT       Master Data (Time-Ind.): Characteristic
    /BIC/RZINFOOBJECT        View SIDs and Char.  Values: Characteristic
    /BIC/SZINFOOBJECT       Master Data IDs: InfoObject
    /BI0/HZINFOOBJECT                 Hierarchy: InfoObject
    /BI0/IZINFOOBJECT                 SID Structure of Hierarchies: InfoObject
    /BI0/KZINFOOBJECT        Conversion of Hierarchy Nodes - SID: InfoObject
    /BI0/TZINFOOBJECT        Texts: Char.
    /BI0/XZINFOOBJECT       Attribute SID Table: InfoObject
    /BI0/ZZINFOOBJECT       View Hierarchy SIDs and Nodes: Char.

  • Master Data Governance - The Business Case

    Hi, I'm trying to help out with getting a business case for improved Master Data Governance over the line ;  It's fairly easy to work out the ITs costs of fixing Master Data related tickets ; it's not so easy to determine the overall opportunity cost to the business of poor MD Governance ; should I take a sampling approach ? How would you go about it ? Thanks in advance John.

    Hello,
    Not sure what sampling approach is, but it certainly help build a business case if you can provide sample data and case studies.
    You may refer the SAP Provided PDF and presentations, to build your Business Case.
    [SAP MDG|http://www.sap.com/solutions/enterprise-information-management/master-data-management/master-data-governance/index.epx]
    Regards,
    Abhishek

  • Problem in adding new tabs in master data screens for RE-FX in ECC 6.0

    Dear members,
    I am working on RE-FX in ECC 6.0. I need some advice on the foll matter:
    When displaying master data for Rental Object (Rental Space) (Tcode REBDRO) there are three tabs that are visible. They are General Data, Measurement and Area Shares. I would like the tab "Supplementary Texts" to also appear as the fourth tab. I have gone to the node Screen Sequence under the Dialog node under Usage View under Master Data in RE-FX.
    I have added this screen to the sequence and have saved it successfully. Now when i am trying to display the rental space (RS) it is still not showing the tab that I just added. When I am trying to remove one of the existing tabs, by going into the same screen sequence I am successful in doing that. I am also able to add some of the other tabs. However every time I am trying to add the tab "Supplementary texts", I am failing to display it in the master data.
    Request you to please help me as I am not an expert in RE-FX.
    Regards,
    Suvarghya Dutta

    Hi Survaghya,
    We are facing problem in adding tab to transaction RESCSU. We have followed all the steps mentioned by you , like
    1. Go to transaction BUPT .
    2. Select Application Object - transactuion BUS0.
    3.Selected Application object as RESU.
    4. And then went to all the following transactions.
        RESCSU0002     SU: Field Groups
        RESCSU0003     SU: Views
        RESCSU0004     SU: Sections
        RESCSU0005     SU: Screens
        RESCSU0006     SU: Screen Sequences.
    5. Created one z function group , having 2 FM for PBO and PAI.
    6. Also one subscreen having the field mapped to CI_INCLUDE - CI_VISCSU.
    But still we are not able to see the tab on the settlemet screen.
    We tried changing the screen sequence of existing tabs, we could change that, but after performing all the steps mentioned above we could not add new tab.
    Please suggest where are we committing a mistake.
    Thanks & Regards,
    Deepti

  • Looking for Master Data Management in non-Netweaver environmets

    Hello
    Based on SAP literature I have read on Master data Management (MDM) ,it is a component of Netweaver product family.
    Currently we are running SAP R/3 Enterprise edition(4.7C)  and wish to have some form of MDM  to maintain a consistent view of master data across different landscapes. Theses landscapes span different geographic and administrative areas.
    Is there any product either  from SAP or third-party vendors which can offer a solution for MDM in environments such as ours that have not yet switched to Netweaver.
    Kind Regards
    Mohammad

    Hi,
    SAP definately offers SAP-MDM soultion. Yet its part of netweaver family but you can buy and install in seperately if you wish not to switch to Netweaver.
    Its a myth that SAP-MDM is only for SAP products.
    There are multiple input options available and hence it can work for you.
    Please suggest if need more info.
    Also you can post more questions into SAP-MDM forum.
    Hope this helps,
    + An

  • InfoProvider: infoObject (master data attribute and text)

    I saw info Object of master data attribute and text in InfoProvider.
    are infoObject act like a table when we do query on them.

    Hi
    Refer to this as down
    Custome Infoobjects Tabels:
    /BIC/M -- View of Master data Tables
    /BIC/P -- Master data Table, Time Independent attributes
    /BIC/Q -- Master data Table, Time Dependent attributes
    /BIC/X -- SID Table, Time Independent
    /BIC/Y -- SID Tabel, Time Dependent
    /BIC/T -- Text Table
    /BIC/H -- Heirarchy Table
    /BIC/K -- Heirarchy SID Table
    Standard Infoobjects Tabels(Buss. Content):
    Replace "C" with "0" in above tables.
    Ex: /BI0/M -- View of Master data Tables

  • SID table in the general tab and master data/text tab

    Hello Bi Experts,
      For example 0material Info-object:
    There is a SID table in the general tab i.e /BI0/SCOMP_CODE
    There is another  SID table Attribute  in the master data/text tab i.e /BI0/XCOMP_CODE,here there are Nav attributes with name S__0COMPANY.
    When i got 0company info-object it got its own SID table i.e /BI0/SCOMPANY
    Can some body explain me what is significance of SID table Attribute  in the master data/text tab and what is difference with SID Table of attribute?
    Cheers,
    Stalin

    Hi,
    SID is surrogate ID generated by the system. The SID tables are created when we create a master data IO. In SAP BW star schema, the distinction is made between two self contained areas: Infocube & master data tables/SID tables.
    The master data doesn't reside in the satr schema but resides in separate tables which are shared across all the star schemas in SAP BW. A numer ID is generated which connects the dimension tables of the infocube to that of the master data tables.
    The dimension tables contain the dim ID and SID of a particular IO. Using this SID the attributes and texts of an master data Io is accessed.
    The SID table is connected to the associated master data tables via teh char key 
    Sid Tables are like pointers in C
    Tables Starting with  Description:
    M - View of master data table 
    Q  - Time Dependent master data table 
    H - Hierarchy table 
    K - Hierarchy SID table 
    I  - SID Hierarchy structure 
    J  - Hierarchy interval table 
    S  - SID table 
    Y  - Time Dependent SID table 
    T  - Text Table 
        F  - Fact Table - Direct data for cube ( B-Tree Index ) 
    E  - Fact Table - Compress cube ( Bitmap Index ) 
    For more info go through the belwo link
    http://www.sap-img.com/bw010.htm
    Regards,
    Marasa.

  • Master Data not updating

    We have found that are master data text isn't updating in APO from BW.  I can see that the data is in the APO PSA but doesn't reflect in the master data object.  We tried deleting the master data but the application advises that you cannot delete master data that's being referenced.
    Are these problems related?
    Why will the master data descriptions not update?
    Please suggest a solution.

    We have are pulling the description text from BW into APO via a master text load.  I am loading the data into the PSA and then into the maste data object.  The PSA shows the correct description.  When I view the master data, the description is empty.  We are updating 0LANGU, QSMATNR, and 0TXTLG.  When I look at the info object table /BIC/TQSMATNR, there are no table entries.

Maybe you are looking for