Costing views

Dear all
What is the function of costing views 1 and 2 in material master record, work scheduling view.
please explain

Hi GB
The important of work scheduling view.
Without this the scheduling will not happen. Try any material without this view, this will throw error message while scheduling.
The assignement of scheduling profile is important in this. Through this profile only the order type is selected for MTO,MTS and Rework. Then you can make auto GR settings and most of the SFC printing setting are taken from this profile.
Assignement of Scheduler is important.
if you want you can change unit of issue here.
The important of costing views.
Without this you cannot run material cost estimates for a material CK 11 n or CK 40 and CK 24 mark and release.
Once you do marking future price is updated here. after rlease the price is updated in Accounting view.
Quantity structure for costing and lot size everything is selected from this view only.
Regards
J. Saravan

Similar Messages

Adding fields in costing view of material master

Hi gurus,
I need to add 4 fields in costing view of material master. I have followed the steps in SPRO, for configuring customized screen in material master.
1) Created a function group YMMCO and copied the screen 2904 from program SAPLMGD1.
2) Added 4 fields in my customized screen.
3) Created copy of 01 ( Screen reference ) to z1 in OMT3B.
Since 2904 is not there in the sequence . I changed one 0001 sequence at the end to 2904 . I also assigned my program
SAPLYMMCO to it. I can see the changed fields in data screen and subscreen.
4) Then I assigned the SSq to z1 in transaction OMT3E.
But unfortunately, when I go to MM01 to create a material , I am not able to view the fields I added in costing view.
I have checked the screen for the previous field, it shows 2904 only.
Two days back, I did the same thing in basic data view 1 , it was working properly. As per client's suggestion I put it in
costing view, it is not working . Please give me suitable suggestions.
Thanks in advance.
D. Mallick

Hi,
I also need to add custom fields to Basic data view. After copying & changing the screen sequence in Config, I could able to see the custom fields in Basic Data view.
I have appended structure with custom fields to MARA table.
But the values I enter in the screen is not getting updated to the table MARA.
Can you please let me know the code, I should have have in PAI (Process After Input) module in the Sub Screen to update the values?
Thanks,
Dasa

How to find the Names of Most costly Views or Most Time consuming views

Hi All,
I had a database consisting of almost 200 views,as a part of Optimization process i want to find out the most costlier views.How to do that.Actually i want the names of the VIEWS,so that i can optimize that.Can any one help me out?
I had one more doubt in our Database a view is created like view A( which is created by joining several tables).so do i need to add index on this view separately or does it take the index of the tables which i joined? And in our Database i had created
a VIEW which is derived from other views(the Joining objects are views not tables),so while i select recoreds from this views which is derived from other views it is taking a lot of time.Is tehre any problem with that?

Please avoid such double post spread over several forums:
http://social.msdn.microsoft.com/Forums/en-US/bae4042a-10b8-4d12-aa46-88a05ea37a76/how-to-find-the-names-of-most-costly-views-or-most-time-consuming-views?forum=sqldataaccess
Olaf Helper
[ Blog] [ Xing] [ MVP]

Not Getting Costing View in Material master

Dear All
In OMS2 i have selected Costing View for Raw Material type. But Still i am not getting Costing1 and Costing2 View while creating material master for Raw material Type.
Kindly Suggest Me.
Thanks
Shobana

hi,
Normally this shd not happen...
but let me know whether you are creating a new material type or making changes in the old one ROH only...
If we see the std sap provided ROH settings in OMS2, then Costing shd be already provided..and if you are making the new material type, use the sref as ROH and then also, the costing will come automatically...
Regards
Priyanka.P

Costing views in Master data

Hi Guys,
i need your suggestion.
my customer opened erroneosuly the costing views for several materials. i know that the views cannot be eliminated so if i flag the "do not cost" the material won't be taken in count during cost estimation right?
thanks
C.

Hi,
If you select the don't cost check box, that material won't take for material cost estimate.
Regards
Srinu

Accounting & costing view in the material master

hi
my client wanted to block the accounting & costing view in the material master for the end users
what i need to do

Hi,
You can (Authorization material master by views of accounting & costing ) achieve this by way of authorization control. In transaction PFCG, select your role for creating / changing the material master. Select option Maintenance statuses. Then at change status option select views that you want to give the authorization to the users. Create profile & save the role. Now assign the role to the users. They will get only those views you have selected. You have to select those views in all the roles related to material master (create, change, display).Better Consult Basis Consultant,
Regards,
Biju K

Material Type without Costing View(non valuated) in Billing Document

We currently have a situation where we have Displays ( non valuated- no costing view material type) being added to regular Sales Orders
In our model, we are also updating product cost on materials when the 1) they were subs or finished goods and 2) via certain billing types.
Unfortunately, the other non valuated display material type is being called when the billing is occuring and is causing an error . See KE4j and KE4c in CO-PA config as a reference
My question- is there a way to further exclude a material type from being costed in PA when it is included in the billing
Thank you
Jeffrey Webber

Costing value zero can happen due to multiple reasons. Here are some of the things to be considered.
Did you check master data of material C to see if there are any costs for material C?
What are the valuation strategy for material valuation set up in the valuation variant? Is there any strategy that included price from purchase info record?
Is info record set up for material C in the new system that you are testing?
Did you check activity quantities in routing and activity rates set up in cost center for the period you are running standard costs?
Did you check the formula in the work center costing tab?
Thanks,
Ram

Cost estimate wrong after adding accounting/costing view

material 3000232 previously does not have accounting and costing view, now we maintained them, after running ck11n, it shows below error: no itemization exists for material, message number ck219, by drill down, the costing log is saying bom not existed.
but this material is using purchase info record, and procurement type is E in mm03, system should not ask BOM, and our costing variant is cost from purchase info record. may i know why we have such error?

Hi
Your Prc Type should be F and not E
Br, Ajay M

Special Procurement MRP View VS. Costing View

Hi Experts,
What's the difference between the 2 Special Procurement Key in the MRP veiw and the Costing View? Should they always be the same?
Thanks,
Kumar

Hi,
MRP:
You use special procurement when you want to be able to override the procurement type in the material master or define the procurement type more precisely.
If the procurement type is in-house, you can nevertheless force the system to ignore the BOM and routing, and process the material as if it were externally procured, by specifying the special procurement as external.
Costing:
If you enter a special procurement type in the Costing view of the material master record, it will be used in costing.
If you do not enter a special procurement type in the costing view of the material master record, the system will use the special procurement type in the MRP view.
For further Clarification revert.
Regards,
S.Babu

How to set MM02 should not allow to change account and costing view

Hi all guru's
How to set MM02 should not allow to change account and costing view details for orher users expect me,plz help me
thanks
ramesh

Hi Ramesh,
                   Use the Authorization Object: M_MATE_STA     Material Master: Maintenance Statuses
Below are the Views for the MM02, Field STATM
Whichever not wanted to be changed, please dont provide them.
A     Work scheduling
B     Accounting
C     Classification
D     MRP
E     Purchasing
F     Production resources/tools
G     Costing
K     Basic data
L     Storage
P     Forecasting
Q     Quality management
S     Warehouse management
V     Sales
X     Plant stocks
Z     Storage location stocks
Regards,
Yawar Khan
Edited by: 1234_abcd on Jan 10, 2012 8:14 AM

Costing view for non valuated, non stock material type

Hi,
can anyone help me in understanding if a costing view is necessary to be maintained in the material master for non stock, non valuated material types.
if it is not necessary then why it is not?
thanks a lot in advance.

Anyone??? This is kinda urgent?

Profit Center in Costing View

Hi Experts
Can u please tell me what is the effect of Profit center I put in Costing view of material
Thanxs in advance

By puting profit center in costing view system will post all the financial documents related to that material in given profit center only and used to find the profit center wise FSV.
Regards
Prashant Kumar

Maintaining costing view in BOM material

Hi all
I am doing product costing in process industry.For material costing purpose i need to maintain costing view for assigning overhead group, variance key in MM master which comes under that BOM.
e.g. If BOM material is FP01 and it has 3 components like RM01, RM02, RM03.Now my question is ' Should i maintain costing view only for one BOM material FP01 or should i maintain for all 4 materials i.e 1 finish product FP01 and 3 raw materials.
Any help would be appreciable and points rewarded
Regards
nilesh

Hi,
Maintain accounting and Costing views for all the materials.
Award Points suitably
Best Regards
surya

How to extend the costing view for a material

How to extend the costing view for a material

Use MM01 Trxn code and Select Material and Select Costing Views and Maintain, Save it.
Else Use MM50 and Select Material and Mainenance Status as G Costing and Execute, Maintain & Save.

MM50 Extend Mtrl costing view, but after maintaining costing view in OMS2.

Hello Sap Gurus,
I have a Unique Issue, i have created few 1000s Materials with material type ZDEN, now initially while creating these materials the costing View was not selected in the Material Type,
but after creating this 1000s of material under ZDEN material type, now we require Costing View to be maintained for this material which are already created,
so as an option we went to the material type ZDEN in OMS2 and extended the costing Views for the material type,
now if i go to MM50 to extend material costing views I'm not able to extend the costing view for the materials, it gives me an error no materials selected,
but alternately if i try extending the costing views individually for each material by MM01 transaction it allows me to extend costing views to the material selected,
is there any bug or issue note to be applied or any solution for this mass extension of views in material master, any bapi to extend Materials of this scenario,
Awaiting your reply,
Thanks and regards
S Kumar

when you create a material master after initial customizing of OMS2 then SAP writes the possible views into table MOFF
If you then do customizing in OMS2 and add the costing view, this is not updated for all your exsting materials
Hence you dont get them via MM50 because it selects the materials based on entries in MOFF, but you can extend with MM01 as SAP checks the current customizing.
execute transaction OMSM which can rebuilt the table and see if you then get your materials in MM50

Costing views

Similar Messages

Maybe you are looking for