Could a timescale for when the wireless is available be set up please on WLC

Hi
I have a number of AP's set up accross the different offices on our corporate network.
We have just installed an AP at a childres home and found that children are accessing the internet when the lights go out for bedtime. Is there a way of setting up a timescale when children are allowed on access?
Thank you

If you have WCS/NCS or Prime you can schedule the WLAN said to be disable and it enabled by using a template also. Forgot about that one.
Sent from Cisco Technical Support iPhone App

Similar Messages

Error: The e-mail server could not be reached when the system was trying to

Dear All,
I've configured the Mail Transport in Portal successfully with SMTP as MS Exchange Server and Third-party Mailing servers. But due to some licensing issues a new MS Exchange mail server have been setup replacing the existing ones.
And when i configure the Mail Transport in the system i get the below message on the eMail Window:
"Error: The e-mail server could not be reached when the system was trying to send the message!
javax.mail.MessaginException: 530 5.7.1 Client ws not authenticated
I've configured (all the steps) the same way as i used to before and restarted the server as well! Please let me know the issue to be resolved, the telnet to the mailserver is also successful. I've try'd searching SDN, didn't find the exact solution... any notes on this?
Thanks,
MS

Hi,
It will depend on your infrastructure, I am not sure and have limited knowledge on netowrks, but in my current landscape both the system were in same domain, but still i had to maintain proxy configuration.
Since it giving authentication error, it feel it could be proxy error.
Please refer below links which talks about same error :
http://java.sun.com/products/javamail/FAQ.html#smtpauth
Or else i think it is issue with port.
Regards,
Jigar Oza
Edited by: jigar oza on Jul 6, 2010 12:43 PM

This message could not be delivered because your SMTP settings are not set. Please use the Accounts Preferences panel to set the SMTP options for your account.

I am not able to send out an email. I keep getting the following message: This message could not be delivered because your SMTP settings are not set. Please use the Accounts Preferences panel to set the SMTP options for your account. Can someone help me with this?

We need some information, starting with the email provider (eg. Google, Yahoo, Bellsouth, etc)

My ipod keeps searching for network, even when the network info is all set properly. It has suddenly started doing this. Also, buffering forever...

My ipod keeps searching for network, even when the network info is all set properly. It has suddenly started doing this. Also, buffering forever... I have tried to reset the network few times, but not working.

Hello Nazer_502,
I would be concerned too if my iPhone was acting this way. It sounds like it is overheating and not holding a charge. I recommend following the steps listed below when experiencing an issue like this:
Battery life seems short
Click ( www.apple.com/batteries/iphone.html) for tips on how to prolong iPhone's battery life.
Try turning iPhone off and then on again.
Connect iPhone to iTunes and restore iPhone.
If the screen shows a low-battery image, the battery is low on power and needs to charge for up to ten minutes before you can use it.
When charging iPhone, make sure to leave it charging until it is fully charged. You'll know the battery is fully charged when the battery icon in the upper-right corner of the screen looks like this .
Note: When charging using a computer, don't connect iPhone to a keyboard. Also, the computer must be turned on and not in sleep or standby mode. If iPhone is connected to a computer that's not turned on or is in sleep or standby mode, the iPhone battery may drain.
You can find the full article here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Thank you for using Apple Support Communities.
Best,
Sheila M.

Any ideas for when the ipod touch will come out? Thanks!:)

Any ideas for when the ipod touch will come out? Thanks!:)

From the terms of use of this forum:
do not add Submissions about nontechnical topics, including:
Speculations or rumors about unannounced products."

After downlaoding the lastest software for my iphone, it could not be activated because the phone was showing "No Service". Please want else can i do?

After downlaoding the lastest software for my iphone, it could not be activated because the phone was showing "No Service". Please want else can i do?

Thank you ProjectVRD. But this has not soloved the problem. It still shows no service even with my sim card well inserted. Even tried using sim card of another service provider thinking the problem could be from the service provider, it wasnt working still. PLEASE APPLE HELP ME.................

I am a Sprint customer and I have a iphone 4s, for when the update will be released in Spanish siri

I am a Sprint customer and I have a iphone 4s, for when the update will be released in Spanish sir

scalo wrote:
I am a Sprint customer
Not relevant.
scalo wrote:
when the update will be released in Spanish sir
When Apple announces it.

Junitreport 'redirect' is not allowed when the secure processing feature is set to true.

junitreport 'redirect' is not allowed when the secure processing feature is set to true.
Hello,
   I'm running flexunit4.1.0-8 and I have an ant script running the test suite.    I recently upgraded from FB 4 to 4.5 and now I'm getting
failures on junitreports. Here's the full error:
[junitreport] : Error! Use of the extension element 'redirect' is not allowed when the secure processing feature is set to true.
[junitreport] Failed to process C:\TDMSE_2_6\tdmse\flex-test\flex_unit_reports\TESTS-TestSuites.xml
BUILD FAILED
C:\TDMSE_2_6\tdmse\build\flexunitbuild.xml:116: Errors while applying transformations: javax.xml.transform.TransformerException: java.lang.RuntimeException: Use of the extension element 'redirect' is not allowed when the secure processing feature is set to true.
Here's the junitreport section:
[code]
<target name="flex-unit-execute-tdmse-test-runner"
                              description="executes the test runner app">
          <flexunit swf="${FLEX_UNIT_TEST_HOME}/TDMSETestRunner.swf"
                              toDir="${FLEX_UNIT_REPORTS_HOME}"
                              haltonfailure="false"
                              localTrusted="true"
                              verbose="true"
                              headless="false"/>
          <junitreport todir="${FLEX_UNIT_REPORTS_HOME}">
                    <fileset dir="${FLEX_UNIT_REPORTS_HOME}">
                              <include name="Test-*.xml"/>
                    </fileset>
                    <report format="frames" todir="${FLEX_UNIT_REPORTS_HOME}/html"/>
          </junitreport>
</target>
[/code]
And here's the full ant build:
[code]
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE project>

          
<project name="flexunitbuild" basedir="." default="flex-unit-start-test-runner">
          <tstamp>
                    <format property="build.date" pattern="MMMMM dd, yyyy" />
                    <format property="build.time" pattern="HH:mm:ss" />
          </tstamp>
          <property name="tdmsedir" value="${basedir}/.." />
          <property name="builddir" value="${tdmsedir}/../build" />
          <property name="FLEX_HOME" value="${builddir}/tools/flex-4.5.0" />
          <property name="PARSLEY_HOME" value="${builddir}/tools/parsley-2.4.0" />
          <property name="FLEX_UNIT_HOME" value="${tdmsedir}/flex-test" />
          <property name="FLEX_UNIT_LIBS_HOME" value="${builddir}/tools/flexunit-4.1.0-8" />
          <property name="FLEX_UNIT_REPORTS_HOME" value="${FLEX_UNIT_HOME}/flex_unit_reports" />
          <property name="FLEX_UNIT_TEST_HOME" value="${FLEX_UNIT_HOME}/flex_unit_tests" />
          
          <taskdef resource="flexTasks.tasks" classpath="${FLEX_HOME}/ant/lib/flexTasks.jar"/>
          <taskdef resource="flexUnitTasks.tasks" classpath="${FLEX_UNIT_LIBS_HOME}/flexUnitTasks-4.1.0-8.jar" />
          
          <echo>basedir: ${basedir}</echo>
          <echo>tdmsedir: ${tdmsedir}</echo>
          <echo>builddir: ${builddir}</echo>
          <echo>FLEX_HOME: ${FLEX_HOME}</echo>
          <echo>FLEX_UNIT_HOME: ${FLEX_UNIT_HOME}</echo>
          <echo>FLEX_UNIT_LIBS_HOME: ${FLEX_UNIT_LIBS_HOME}</echo>
          <echo>FLEX_UNIT_REPORTS_HOME: ${FLEX_UNIT_REPORTS_HOME}</echo>
          
          <target name="flex-unit-start-test-runner"
                              description="clean, compile and run tdmse flexunit tests"
                              depends="flex-unit-clean-tdmse-tests,
                              flex-unit-tdmse-compile-test-suite,
                              flex-unit-execute-tdmse-test-runner"/>
          <target name="flex-unit-clean-tdmse-tests" description="Cleans the FlexUnit test and reports directories">
                    <delete dir="${FLEX_UNIT_REPORTS_HOME}" failOnError="false"
                                        includeEmptyDirs="true" />
                    <mkdir dir="${FLEX_UNIT_REPORTS_HOME}" />
                    <delete dir="${FLEX_UNIT_TEST_HOME}" failOnError="false"
                                        includeEmptyDirs="true" />
                    <mkdir dir="${FLEX_UNIT_TEST_HOME}" />
          </target>
          <target name="flex-unit-tdmse-compile-test-suite">
                    <mxmlc file="${tdmsedir}/flex-src/TDMSETestRunner.mxml"
                                        output="${FLEX_UNIT_TEST_HOME}/TDMSETestRunner.swf">
                              <load-config filename="${FLEX_HOME}/frameworks/flex-config.xml"/>
                              
            <locale>en_US</locale>
            <source-path path-element="${tdmsedir}/flex-src/locale/{locale}" />
            <include-resource-bundles>COMMON</include-resource-bundles>
            <include-resource-bundles>OW</include-resource-bundles>
            <include-resource-bundles>PREF</include-resource-bundles>
            <include-resource-bundles>RD</include-resource-bundles>
            <include-resource-bundles>RG</include-resource-bundles>
                              
                              <compiler.library-path dir="${PARSLEY_HOME}" append="true">
                                        <include name="parsley-flex4-2.4.0.swc" />
                                        <include name="spicelib-flex-2.4.0.swc" />
                              </compiler.library-path>
                              
                              <source-path path-element="${tdmsedir}/flex-src" />
                              <source-path path-element="${tdmsedir}/flex-test" />
                              
                              <compiler.library-path dir="${FLEX_UNIT_LIBS_HOME}" append="true">
                                        <include name="*.swc"/>
                              </compiler.library-path>
                              
                              <compiler.library-path dir="${FLEX_UNIT_LIBS_HOME}/mocklibs" append="true">
                                        <include name="*.swc"/>
                              </compiler.library-path>
                              <compiler.verbose-stacktraces>true</compiler.verbose-stacktraces>
                              <compiler.headless-server>true</compiler.headless-server>
                    </mxmlc>
          </target>
          <target name="flex-unit-execute-tdmse-test-runner"
                                        description="executes the test runner app">
                    <flexunit swf="${FLEX_UNIT_TEST_HOME}/TDMSETestRunner.swf"
                                        toDir="${FLEX_UNIT_REPORTS_HOME}"
                                        haltonfailure="false"
                                        localTrusted="true"
                                        verbose="true"
                                        headless="false"/>
                    <junitreport todir="${FLEX_UNIT_REPORTS_HOME}">
                              <fileset dir="${FLEX_UNIT_REPORTS_HOME}">
                                        <include name="Test-*.xml"/>
                              </fileset>
                              <report format="frames" todir="${FLEX_UNIT_REPORTS_HOME}/html"/>
                    </junitreport>
          </target>
          
</project>
[/code]
I haven't seen much info about this problem anywhere on google except for this forum post:
http://forums.adobe.com/thread/740146
Thanks for any help!

If you include the xalan.jar library to the build.xml execution classpath everything works!!!!!!.
I hope it will be userfull.

Entry Point Not Found, AVCFAssestCreateWithByteStremAndOptions could not be located in the dynamic link libary AVFoundationCF.dll. Please help!

Entry Point Not Found, AVCFAssestCreateWithByteStremAndOptions could not be located in the dynamic link libary AVFoundationCF.dll. Please help!
have followed all the touble shooting links to deleate temp files, unistal ect. still not working! when I reinstalled I got an error code. Please help
I am running Windows 7.

It says "error 7, windows error 127"
Please help!

When the DPS is available in China?

I found that DPS is only available in United States,Canada,Mexico now,i can't buy the DPS in China.So i want to know when the DPS is available in China?

Hi,
You could contact one of the DPS resellers in Asia Pacific. A list of resellers is available on: http://www.adobe.com/products/digital-publishing-suite-pro/buying-guide-resellers.html ; They might be able to help you.
With kind regards,
Klaasjan Tukker

I am in an internet cafe and my macbook pro can't find the wireless network available here. I have used this network before. I have restarted my machine several times too. help please

I am in an internet cafe and my macbook pro can't find the wireless network available at the cafe. I have used this network before. I have restarted my machine several times too. help please

Change your router channel. Sometimes this is all you will have to do.
Power cycling the router. Read the router's user manual or contact their tech support for instructions.
System Preferences/Internet & Network/Network
Unlock the padlock
Locations: Automatic
Highlight Airport
Click the Assist Me button
In the popup window click the Diagnostic button.
System Preferences/Network- Unlock padlock. Highlight Airport. Network Name-select your name. Click on the Advanced button. Airport/Preferred Networks-delete all that is not your network.
Place a check mark next to "Remember networks this computer has joined." Click the OK button and lock the padlock. Restart your computer.
http://support.apple.com/kb/TS1920 Mac OS: How to release and renew a DHCP lease
No internet connection (wireless)
Check to see if an extra entry is present in the DNS Tab for your wireless connection (System Preferences/Network/Airport/Advanced/DNS).
Delete all extra entries that you find.
Place a check mark next to "Remember networks this computer has joined."
Other resources to check into:
http://www.netspotapp.comNetspot
How to diagnose and resolve Wi-Fi slow-downs
Pv6 troubleshooting
Mac OS X 10.6 Help: Solving problems with connecting to the Internet
What Affects Wireless Internet?
Solutions for connecting to the Internet, setting up a small network, and troubleshooting

What is the transaction code for see the Web Services available in SAP

Hi
I came to know that SAP has provided its own webservices... I need some information on that... If any one has documentation on that can u please send it to me... My ID is <b>[email protected]</b>.
What is the trasaction code for see the web services available in SAP.... Can any one help.. Please its urgent
Best Regards
Ravi Shankar B
Message was edited by:
RaviShankar B

Hi,
you can find Web Services (Enterprise Services) in the Enterprise Services Workplace (ES Workplace). The ES Workplace allows you to explore, test, and use enterprise services to make enterprise SOA tangible. Here, you will find all of the currently productized enterprise services by SAP.
Best Regards,
Boris Mueller
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/developerareas/esa/esapreview">ES Workplace at SDN</a>
<a href="http://esapreview.sap.com:82/socoview(bD1kZSZjPTgwMCZkPW1pbg==)/flddisplay.asp">ES Workplace</a>

I have QuickTime Player, yet its not giving me an option for entering the PRO registration! I need help Please!!

I have QuickTime Player, yet its not giving me an option for entering the PRO registration! I need help Please!! I have the snow Leapord

I have QuickTime Player, yet its not giving me an option for entering the PRO registration! I need help Please!! I have the snow Leapord
Only the QT 7 Player can be upgraded to QT 7 "Pro"—not the QT Player (A.K.A. QT X Player). Follow THESE INSTRUCTIONS.

What has Apple got against Flash, and can anyone tell me when 4G will be available on UK Ipads please.

What has Apple got against Flash, and can anyone tell me when 4G will be available on UK Ipads please.

Flash : http://www.apple.com/hotnews/thoughts-on-flash/ . And as Adobe have also announced that they are stopping development on all mobile versions of flash it's unlikely to ever happen. You could try third-party browser apps such as Skyfire, iSwifter, Puffin and Photon which 'work' on some flash-based sites, but judging by their reviews not all. Also some websites, especially news/media sites, have their own apps in the App Store.
In terms of 4G here in the UK, there aren't currently any 4G networks services available here - and I'm not sure that the auction for the 4G spectrum here has even happened yet, so it probably won't be any time soon. But I don't think that the current iPad will be able to work on the UK's 4G spectrum which is different to what is being used in the US.

Can i choose the resolution of my external display for when the lid is closed when my lid is open

When I close the lid of my MacBook Pro for an external display apple chooses a resolution that isn't compatible with my display can I choose the resolution when the lid is open in any way of my external display for the mode when the lid is closed?

Hi there, I had a similar problem and was unable to resolve it. I spent about an hour on the phone with a very helpful AppleCare rep who was also completely stuck. It would seem that the only solution is to choose a setting with trial and error while the lid is closed.
My MacBook ended up getting stuck on a closed-lid reoslution that wasn't supported, so I had to do a screen-share with another device to see what the video card was sending to the external display and change it back that way.

Could a timescale for when the wireless is available be set up please on WLC

Similar Messages

Maybe you are looking for