Could any body tell me the significance of Partner Profiles in IDOC PROCESS

Hi,
Could any body tell me the significance of Partner Profiles in IDOC process.
Thanks in Advance,
BSV.

Hi,
The partner profile is used to validate the sender and receiver system for a given message type and to assign to the correspondence process code (function module) to post the IDoc to application system.
This applies for both Inbound and Outbound IDOC's.
Also please check this link for more information.
http://help.sap.com/saphelp_46c/helpdata/en/dc/6b803343d711d1893e0000e8323c4f/frameset.htm
Regards,
Ferry Lianto

Similar Messages

I had a trouble with my lap top and had to format hard disk and install all soft ware again. could any body tell me how to transfer the application and data in my i phone back to my laptop.

I had a trouble with my lap top and had to format hard disk and install all soft ware again. could any body tell me how to transfer the application and data in my i phone back to itune.

You can't. It still thinks that your iPhone is synced with another iTunes library (the one that you had before you reformatted the hard drive.

Can any body tell me the general tickets.

Hi all,
Can any body tell me the general tickets received by users in production support.means the issues which we have to solve.

Hi
General tickets
1) SID missings
2) ODS activation failed
3) Delta failures from ODS to Cube
4) Authorizations to Co Codes for the reports
5) Error records in PSA
6) Special characters or Invalid characters
7)Timestamp error
Etc
Hope it helps
regards
AK
Assign Points if usefull

Could any body give me the FICO and MM flows

hi, this kalyan
could any body give me the FICO and MM flows

Hi,
Check this out.
FICO Module:
Please chcek this link and go to SAP R/3 Enterprise Application Components ->
Cross-Application Components -> Financial.
http://help.sap.com/saphelp_470/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
you will go through this link
http://www.sapgenie.com/sapfunc/fi.htm
Check this Link it out
http://www.sap-img.com/sap-download/sap-tables.zip
FI :
http://www.thespot4sap.com/IntroTo/SAP_FI_Module_Introduction.asp
http://www.thespot4sap.com/IntroTo/SAP_CO_Module_Introduction.asp
for tables check out link..
http://www.sapgenie.com/abap/tables_fi.htm
Take a look at this.
http://www.sap-img.com/sap-fi.htm
Please chcek this link and go to SAP R/3 Enterprise Application Components ->
Cross-Application Components -> Financial.
http://help.sap.com/saphelp_470/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
you will go through this link
http://www.sapgenie.com/sapfunc/fi.htm
http://www.erpgenie.com/sapfunc/fi.htm
http://www.sap-img.com/index.htm
http://www.amazon.com/Configuring-SAP-Essential-Financial-Controlling/dp/0782125972
MM module:
http://www.sapfunctional.com/MM/MainPage.htm
For MM tables: refer
Re: MM FLOW
Reward points if helpful.
Regards,
Ramya

Could any body explain me the input arguments to EXEC( );

in API i Found the function Runtime.getRuntime.exec( ) in six overloaded ways.
1. Process exec(String command)
2. Process exec(String[] cmdarray)
3. Process exec(String[] cmdarray, String[] envp)
4. Process exec(String[] cmdarray, String[] envp, File dir)
5. Process exec(String cmd, String[] envp)
6. Process exec(String command, String[] envp, File dir)
can any body could explain me explain about
command, cmdarray, envp & dir

in API i Found the function Runtime.getRuntime.exec(
) in six overloaded ways.What specifically did you not understand about the explanation of the parameters in the javadocs?

Can any body tel me the pin code of macBook pro

Tel me the pin code combition of macBook pro.

What exactly do you mean by the pin code combination of the MacBook Pro? Are you looking for the model number for an MBP? That will change for specific year/updates to the hardware. Look at http://www.everymac.com for specific MBP year/models and see if what you want is in the available information.

Can any body tell me the transaction for budget check in SRM ?

HI,
Experts,
As i want to check the budget of a business partner / customer i am new to that can u please tell me basic information about budget check and pass the Standard transaction for budget check.
Thanks in advance,
Shabeer Ahmed

Hi    Dinesh,
Thanks for your reply and can u send me the Budget check standard transaction and related tables and how he going to check his budget.
According to me:
1    In which table Amount is maintained for BP
2   How we have check the budget.
Do u have any document related to this please forward it to me.

Can any body tell me how to use the TCODE:ABF1 ?

Can any body tell me how to use the TCODE:ABF1 ?
Can any body tell me the different of the ABF1 and FB01?
Thank very much.

Hi Jie,
both Transaction codes are working are same.
Both are working through program : SAPMF05A.
Packages are different: FIDC & AB.
FB01 : we can control objects through F_BKPF_BUK
Hope its clear.
Kishore K

Could any one tell me that How can i create the service User ie j2ee SID

hi all,
In the implementation of SPNego Authentication schem in my portal system.
i want to create the service user ie .j2ee-<SID>.
<b>could any one tell me that How can i create the service User ie j2ee-<SID> in my visual administrator??</b>.
any help will be highly Appretiated .
thanks and regards.
vinit soni.

Vineet,
the user management tab opens in Read Only mode - thats why the button is coming as disabled. There is a button for switching into Edit mode - it looks like a pen / pencil on the top bar. Click on that - your "Create User" button would be enabled.
Also regarding creation of Service User via code level you can see <a href="https://www.sdn.sap.com/irj/sdn/thread?messageID=1057074">THIS</a> thread. And <a href="http://HERE">http://help.sap.com/saphelp_nw04/helpdata/en/f9/e3162ec55f4df6922d161f3785012a/frameset.htm</a>HERE[/url] is the SAP Help documentation on required permission settings.
Regards,
Shubhadip
Message was edited by:
Shubhadip Ghosh
Message was edited by:
Shubhadip Ghosh

Can any body tell me how to make changes in the print layout of Fb03.

hi,
Can any body tell me how to make changes in the print layout of Fb03.
I want to add comapny address on the layout.
Regards
Mave

If you mean the correspondence, you have to change the configuration in Financial Accounting -> AR and AP -> Business Transactions -> Outgoing Invoices -> Carry Out abd Check Settings for Correspondence. There, you need to assign your custom Program or Layout for the Correspondence Type (like SAP19) and Program.
If you mean the display layout in transaction FB03, You can change a few settings, mainly with BKPF and BSEG fields. I don't think you can add company address, though.
Good luck,
Bhanu

Could any one tell me what is the difference between swfloader and module loader?

Hi All,
                      Could any one tell me what is the difference between SWFLoader and Module Loader in Flex3 in detail?

Hi,
ModuleLoader is a kind of strange API that is really just intended to look like SwfLoader for modules that contain a single visual component, and hides most of the module loading infrastructure, which is all about class factories.
What I mean by "only loaded once" is that if you have several places in the code that call the ModuleManager.getModule("url").load() call, it will only ever get loaded over the wire and interpreted once, subsequent "loads" will just re-dispatch pseudo-load events to the new client. In other words, the class factory is a singleton for a given url. Unloading is a totally different story. As you note, not everything is truly unloadable, because there may be lots of references to stuff in
the module that will keep it alive and un-GC'ed.
I suggest playing with the low-level API so that you understand the backing implementation, and this should help you understand the limits of ModuleLoader.
The main difference between modules and applications is that modules have lower overhead, and they only ever get loaded once, no matter how many times you load them. If you're using the ModuleLoader API, keep in mind that you're losing about half the functionality of the module system. I will assume that you are, because otherwise it would be obvious where to expose methods. You might want to play around with the lower level ModuleManager API just to get a hang of what's going on - ModuleLoader is a pretty thin veneer over the lower API.
                Basically, what you want to do is to have your module implement an interface, say IModuleWhatever.
Also try and refer to this link which was previously discussed in this forum..
http://forums.adobe.com/message/74404
Thanks,
Bhasker

Can any body tell me what is the need of creating shipping Instruction

Hi Everybody,
Can any body tell me what is the need of creating shipping Instruction in Material Management & where it is used.
Menu path -> IMG -> Material Management -> Purchasing - > Material Master - > Define Shipping instruction.
2. What is the use of Manufacturer Part Profile & how it is used in the SAP system.
Menu path -> IMG -> Material Management -> Purchasing - > Material Master - > Define Manufacturer Part Profile.
Thanks & Regds.....
Rashmi

This characteristic describes the packaging and shipping requirements that have to be fulfilled by the vendor
The instructions issued to a vendor regarding the shipment or packing of ordered goods.
o     CO coil
o     NE unpacked
o     NT nylon net
A manufacturer part profile contains indicators and control parameters, which define the conditions for using (inventory-managed or non-inventory-managed) manufacturer parts in the procurement process.
The manufacturer part profile specifies how manufacturer parts (MPN materials) can be used in the procurement process.
The manufacturer part profile is assigned to the master record for a firm's own inventory-managed material.
Among other things, it determines whether:
u2022     The MPN material or the inventory-managed material is to be entered in a purchase order
u2022     Info records can be created for the MPN material or the firm's own material
u2022     The MPN material can be changed during the procurement process

ANY BODY TELL ME WHAT IS THE REASON FOR THIS ERROR

hi... experts....
Iam having one screen in my previous module pool program....and now as per my requirement i added on e new field...
for that...
1. i declared one variable in top include...
2. cretaed one more new block with help of box in layout screen..
3. added some text field and inputput out field...
4. and in that block i also added one line with test like... following...
" NOTE: PLEASE ENTER THE ..... VALUE..." Like this.... just for to give direction...
so these are the steps i taken to add new field to my screen... but here i am geting error ... while entering the value in that field and press any push button.... including back in that screen... like....
"INVAILD FIELD FORMAT (SCREEN ERROR)"
.... ANY BODY TELL ME WHAT IS THE REASON FOR THIS ERROR... COMMONLY???
THANK YOU,,,
NAVEEN..

hi naveen,
there can be problem from ur layout side.
Goto SE51. in Layout editor make sure that the type in screen and in TOP Include is same.
and if you are using currency field than it can also give error to you.
if still you any error .
give me type of variable whcih you defined in TOP and also code.
give reward if helpfull.

Could any body explain the step by step procedure of creation of BOM in DP?

Hi,
Could any body explain the step by step procedure of creation of BOM in DP?
Is there any document available to create the step by step procedure?
Please mail to this Id:[email protected]
Regards,
Chow.

Look at this source
http://help.sap.com/saphelp_scm41/helpdata/en/62/944d40cef71059e10000000a155106/frameset.htm
The steps are very simple
(1) PreRequisite: There should be a SNP/PPDS PDS generated either from R3 BOM/Routing or APO IPPE object
(2) Use the transaction mentioned earlier- /SAPAPO/CURTO_GEN_DP - Generate DP Production Data Structure
Let us know If you are looking for the settings which are to be used in the transaction mentioned above
or
You need to know how to create the SNP/PPDS PDS or IPPE object
Regards
Kumar

Hi could any one tell me if the proxy configuration is a must for file to

hi could any one tell me if the proxy configuration is a must for file to mail scenario

Not needed at all.
Proxy are used when integrating with a SAP system and in the case of a file to mail scenario all you need is a sendr file adapter and receivr mail adapter and a mail server in the same netwrok as you XI server.
Regards
Bhavesh

Could any body tell me the significance of Partner Profiles in IDOC PROCESS

Similar Messages

Maybe you are looking for