Could any one explain me this code pls

IF sy-subty O print.
    CALL FUNCTION 'GET_PRINT_PARAMETERS'
    EXPORTING
          mode                   = 'BATCH'
         no_dialog              = 'X'
        IMPORTING
             out_archive_parameters = arcpar
             out_parameters         = pripar
        EXCEPTIONS
             archive_info_not_found = 1
             invalid_print_params   = 2
             invalid_archive_params = 3
             OTHERS                 = 4
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    SUBMIT zhterot1 TO SAP-SPOOL
                         WITHOUT SPOOL DYNPRO
                         SPOOL PARAMETERS pripar
                         ARCHIVE PARAMETERS arcpar
*                   SPOOL PARAMETERS %_print
*                   ARCHIVE PARAMETERS %_archive
                   WITH pchplvar        =   pchplvar
                   WITH pchotype        =   pchotype
                   WITH pchobjid        IN pchobji3
                   WITH pchseark        =   pchseark
                   WITH pchobeg         =   pchobeg
*                    with PCHZTR_D        =   PCHZTR_D
*                    with PCHZTR_M        =   PCHZTR_M
*                    with PCHZTR_Y        =   PCHZTR_Y
*                    with PCHZTR_A        =   PCHZTR_A
*                    with PCHZTR_P        =   PCHZTR_P
*                    with PCHZTR_F        =   PCHZTR_F
                   WITH pchbegda        =   pchbegda
                   WITH pchendda        =   pchendda
                   WITH pchwegid        =   pchwegid
                   WITH kurs            =   kurs
                   WITH kurst           =   kurst
                   WITH kugrp           =   kugrp
                   WITH pchobji2        IN pchobji2
                   WITH expand          =   expand
                   WITH s_shwfld       IN s_shwfld
                   AND RETURN
ELSE.
    SUBMIT zhterot1 WITH pchplvar        =   pchplvar
                      WITH pchotype        =   pchotype
                      WITH pchobjid        IN pchobji3
                      WITH pchseark        =   pchseark
                      WITH pchobeg         =   pchobeg
*                    with PCHZTR_D        =   PCHZTR_D
*                    with PCHZTR_M        =   PCHZTR_M
*                    with PCHZTR_Y        =   PCHZTR_Y
*                    with PCHZTR_A        =   PCHZTR_A
*                    with PCHZTR_P        =   PCHZTR_P
*                    with PCHZTR_F        =   PCHZTR_F
                      WITH pchbegda        =   pchbegda
                      WITH pchendda        =   pchendda
                      WITH pchwegid        =   pchwegid
                      WITH kurs            =   kurs
                      WITH kurst           =   kurst
                      WITH kugrp           =   kugrp
                      WITH pchobji2        IN pchobji2
                      WITH expand          =   expand
                      WITH s_shwfld       IN s_shwfld
                      AND RETURN
ENDIF.
In the above code the Pirnt is having the Default '02'
Now when we place 0 comparision it is going to validate by converting into binary mode ...
So what is expecting is to
when the condition will come true?
what is the use of submit program name calling those spool ?
Could any one having any idea pls revert back asap!
Regards
Sas

Hi Friend,
The operator O is a byte logical opertaor, it checks after converting into bit.
In your case if SY-SUBTY field contains value 0 or 2 will be true.
After that it is taking the current client's printer setting and other parameters, which is used to pass in submit program.The submit program having some output which is generating the spool.
Hope it will help you.
Regards
Krishnendu

Similar Messages

Hi experts,could any one explain with an example of images

hi SAP experts,could any one explain with an example of images Reverse image,update image,Delete image and Add image.

Hi,
Go thru below thread it has already discussed
Re: selection from scratch: full VS (intialize delta + delta) update bi 7.0
Assign points if it helps you
thanks

Any one please correct this code it is not giving the result as expected.

class image {
     public int[][] data;
     public int rows;
     public int columns;
public class BlurImage {
public int function1(image i1,int k,int j,int rad)
               int sum=0;
               int count=0;
               int R=0,G=0,B=0;
               String s=new String();
               for(int x=k-rad;x<=k+rad;x++)
                    if(x<0 || x>=i1.rows)
                         continue;
for(int y=j-rad;y<=j+rad;y++)
                         if(y<0 || y>=i1.columns)
                              continue;
s=Integer.toHexString(i1.data[x][y]).substring(4,6);
                         B=B+Integer.valueOf(s, 16).intValue();
                         s=Integer.toHexString(i1.data[x][y]).substring(2,4);
                         G=G+Integer.valueOf(s, 16).intValue();
                         s=Integer.toHexString(i1.data[x][y]).substring(0,2);
                         R=R+Integer.valueOf(s, 16).intValue();
count++;
               R=R/count;
               G=G/count;
               B=B/count;
               System.out.println(" ");
               String s1=new String();
               s1=Integer.toHexString(R).concat(Integer.toHexString(G));
               s1=s1.concat(Integer.toHexString(B));
               System.out.println(Integer.valueOf(s1, 16).intValue()+" ");
               return Integer.valueOf(s1, 16).intValue();
public image blur_image(image i, int radius) {
          //Write your code here
          if(i.rows<radius || i.columns<radius)
               return null;
          image i1 = new image();
          i1.rows=i.rows;
          i1.columns=i.columns;
          i1.data=new int[i.rows+1][i.columns+1];
          for (int k = 0; k < i.rows; k++)
          for (int j = 0; j < i.columns; j++)
                    if(i.data[k][j]>0xFFFFFF)
                         return null;
                    i1.data[k][j]=(int)function1(i,k,j,radius);
          return i1;
public static void main(String[] args) {
//TestCase 1
try {
image i = new image();
i.rows = 5;
i.columns = 3;
i.data = new int[][]{{6, 12, 18}, {5, 11, 17}, {4, 10, 16}, {3, 9, 15}, {2, 8, 14}};
BlurImage obj = new BlurImage();
image res = obj.blur_image(i, 2);
System.out.println("TestCase 1");
if (res != null) {
for (int k = 0; k < i.rows; k++) {
System.out.println();
for (int j = 0; j < i.columns; j++) {
System.out.print(res.data[k][j] + ",");
} else
System.out.println("NULL");
catch (Exception e) {
               e.printStackTrace();
//TestCase 2
try {
image i = new image();
i.rows = 3;
i.columns = 5;
i.data = new int[][]{{0x5a0060, 0x6a0050, 0x6a0050, 0x6a0050, 0x7f0038},
{0x5a0060, 0x6a0050, 0x6a0050, 0x6a0050, 0x7f0038},
{0x5a0060, 0x6a0050, 0x6a0050, 0x6a0050, 0x7f0038}};
BlurImage obj = new BlurImage();
image res = obj.blur_image(i, 1);
System.out.println("\nTestCase 2");
if (res != null) {
for (int k = 0; k < i.rows; k++) {
System.out.println();
for (int j = 0; j < i.columns; j++) {
System.out.print(Integer.toHexString(res.data[k][j])+ ",");
} else
System.out.println("NULL");
catch (Exception e) {
e.printStackTrace();
It should give the output as:------
test case 1:-
[ 11, 11, 11 ]
[ 10, 10, 10 ]
output.data = [ 10, 10, 10 ]
[ 9,    9,   9 ]
[ 9,    9,   9 ]
test case 2:-
[ 0x620058, 0x640055, 0x6a0050, 0x710048, 0x740044 ]
output.data = [ 0x620058, 0x640055, 0x6a0050, 0x710048, 0x740044 ]
[ 0x620058, 0x640055, 0x6a0050, 0x710048, 0x740044 ]

public class Test
     public static void main(String args[])
          throws Exception
          System.out.println("[ 10, 10, 10 ]");
}I'll let you customize the above code for test case 2.
There is not a single comment in the code. We have no idea what the code is supposed to do. We have no idea what you think is wrong. Therefore the above solution is the best we can provide.

I was just told ML could not be installed because apple HD is broken and could not be repaired. I never had any problem ever to suggest a broken HD, on my 2 yr. old mac pro. 10.6.8. Any one else having this problem? Will I get a refund, if so how?

I have a 2009 MAC PRO 10.6.8. Had never had any problems. Tried installing Mountain Lion today. Was told, " Mountain Lion could not be installed because Hard Disk is broken"!
Is it because HD is broken or perhaps incompatible? Has any one else had this problem? I had no symptoms suggestive of a broken HD. Will I get reimbursed if ML could not be installed? If so what do I have to do?
How can I verify the status of the HD, in absence of symptoms for my own information?

mottoo wrote:
I have a 2009 MAC PRO 10.6.8. Had never had any problems. Tried installing Mountain Lion today. Was told, " Mountain Lion could not be installed because Hard Disk is broken"!
Is it because HD is broken or perhaps incompatible? Has any one else had this problem? I had no symptoms suggestive of a broken HD. Will I get reimbursed if ML could not be installed? If so what do I have to do?
How can I verify the status of the HD, in absence of symptoms for my own information?
The solution to your problem is rather simple
1: Get a external hard drive and use Disk Utility to format it with a GUID partition map and OS X extended Journaled.
2: Export your browser bookmarks and any other needed data to a file,. Copy your User data folders of Music, Pictures etc over to the external drive via drag and drop copy methods, disconnect the drive.
I don't advise using TimeMachine at this point since your boot drive is messed up, thus so will be your TM drive, just transfering the problem later on back to the new install. We are proceeding with a "Fresh install" method to eliminate as many issues as possible which a TM restore can return to a new OS X install.
3: Next you will need to follow these instructions to zero erase (important) and install 10.6 fresh, use the same named account (different password ok)
How to erase and install Snow Leopard 10.6
4: Before you return files or install programs, Software Update fully and use the AppStore to install 10.8, this way it will be on a fresh 10.6 install, free of issues.
5: Install any and all 10.8 compatible programs as much as possible before returning your User files, this is a performance measure.
If you need too, use this site to find one's that are 10.8 compatible.
http://roaringapps.com/apps:table
6: Last install your user files from the external drive backup into their respective Music, Pictures, Movies etc., folders, into the same named accounts so you preserve your iTunes playlists. When you open those programs, they will update their respective support files automatically.

I am using systec usbmodule1 to send and receive CAN messages , is any one have tried this in labview?, if yes can you send me the code thanks

i am using systec usbmodule1 to send and receive CAN messages , is any one have tried this in labview?, if yes can you send me the code
thanks
Solved!
Go to Solution.

Hey,
All of our CAN drivers have been written for National Instruments' CAN hardware (referenced here : http://digital.ni.com/public.nsf/allkb/E2C6ED025C798C5586256F4E00520448 ). Thus, you will have to code all your communication manually, unless Systec provides a LabVIEW driver. There might be various dll files that Systec provides for communication, which you will be able to access through LabVIEW. Take a look at the Call Library Function Node, which can be found from the Functions Palette under Connectivity -> Libraries & Executables. Here you can call a dll file, and also the individual functions within that dll.
I would suggest posting your question either to the LabVIEW forum, as previously mentioned, or to the CAN forum found here : http://forums.ni.com/ni/board?board.id=30
Justin E
National Instruments R&D

Can any one explain me about Field symbols in Genral Reports?

Can any one explain me about Field symbols in Genral Reports?
If possible, plz explain me with the code to explain me about the field symbols.
Regards,
Krishna Chaitanya

Syntax
FIELD-SYMBOLS <fs> { typing | STRUCTURE struc DEFAULT dobj }.
Extras:
1. ... typing
2. ... STRUCTURE struc DEFAULT dobj
Effect
The FIELD-SYMBOLS statement declares a field symbol <fs>. The naming conventions apply to the name fs. The angle brackets of the field symbols indicate the difference to data objects and are obligatory. You can declare field symbols in any procedure and in the global declaration section of an ABAP program, but not in the declaration section of a class or an interface. You can use a field symbol in any operand position in which it is visible and which match the typing defined using typing.
After its declaration, a field symbol is initial - that is, it does not reference a memory area. You have to assign a memory area to it (normally using the ASSIGN statement) before you can use it as an operand. Otherwise an exception will be triggered.
Addition 1
... typing
Effect
You can use the addition typing to type the field symbol. The syntax of typing is described under Syntax of Typing. The typing specifies which memory areas can be assigned to the field symbol (see Checking the Typing) and in which operand positions it can be used.
Note
You can omit the addition typing outside of methods. In this case, the field symbol has the complete generic type any and is implicitly assigned the predefined constant space during the declaration.
Addition 2
... STRUCTURE struc DEFAULT dobj
Effect
If you specify the addition STRUCTURE instead of typing for a field symbol, and struc is a local program structure (a data object, not a data type) or a flat structure from the ABAP Dictionary, this structure is cast for the field symbol <fs>. You have to specify a data object dobj that is initially assigned to the field symbol.
The field symbol copies the technical attributes of structure struc as if it were completely typed. When you assign a data object using the addition DEFAULT, or later using ASSIGN, its complete data type is not checked in non- Unicode programs. Instead, the system merely checks whether it has at least the length of the structure and its alignment.
In Unicode programs, we differentiate between structured and elementary data objects. For a structured data object dobj, its Unicode fragment view has to match the one of struc. In the case of an elementary data object, the object must be character-type and flat, and struc must be purely character-type. The same applies to assignments of data objects to field symbols typed using STRUCTURE when using the ASSIGN statement.
Note
Field symbols declared using the addition STRUCTURE are a mixture of typed field symbols and a utility for casting structured data types. You should use the additions TYPE or LIKE for the FIELD-SYMBOLS statement to type field symbols, while the addition CASTING of the ASSIGN statement is used for casting.
Example
The first example shows the obsolete usage of the addition STRUCTURE.
DATA wa1 TYPE c LENGTH 512.
FIELD-SYMBOLS <scarr1> STRUCTURE scarr DEFAULT wa1.
<scarr1>-carrid = '...'.
The second example shows the replacement of STRUCTURE with the additions TYPE and CASTING.
DATA wa2 TYPE c LENGTH 512.
FIELD-SYMBOLS <scarr2> TYPE scarr.
ASSIGN wa2 TO <scarr2> CASTING.
<scarr2>-carrid = '...'.
Also,
Field Symbols
Field symbols are placeholders or symbolic names for other fields. They do not physically reserve space for a field, but point to its contents. A field symbol cam point to any data object. The data object to which a field symbol points is assigned to it after it has been declared in the program.
Whenever you address a field symbol in a program, you are addressing the field that is assigned to the field symbol. After successful assignment, there is no difference in ABAP whether you reference the field symbol or the field itself. You must assign a field to each field symbol before you can address the latter in programs.
Field symbols are similar to dereferenced pointers in C (that is, pointers to which the content operator * is applied). However, the only real equivalent of pointers in ABAP, that is, variables that contain a memory address (reference) and that can be used without the contents operator, are reference variables in ABAP Objects.
All operations programmed with field symbols are applied to the field assigned to it. For example, a MOVE statement between two field symbols moves the contents of the field assigned to the first field symbol to the field assigned to the second field symbol. The field symbols themselves point to the same fields after the MOVE statement as they did before.
You can create field symbols either without or with type specifications. If you do not specify a type, the field symbol inherits all of the technical attributes of the field assigned to it. If you do specify a type, the system checks the compatibility of the field symbol and the field you are assigning to it during the ASSIGN statement.
Field symbols provide greater flexibility when you address data objects:
If you want to process sections of fields, you can specify the offset and length of the field dynamically.
You can assign one field symbol to another, which allows you to address parts of fields.
Assignments to field symbols may extend beyond field boundaries. This allows you to address regular sequences of fields in memory efficiently.
You can also force a field symbol to take different technical attributes from those of the field assigned to it.
The flexibility of field symbols provides elegant solutions to certain problems. On the other hand, it does mean that errors can easily occur. Since fields are not assigned to field symbols until runtime, the effectiveness of syntax and security checks is very limited for operations involving field symbols. This can lead to runtime errors or incorrect data assignments.
While runtime errors indicate an obvious problem, incorrect data assignments are dangerous because they can be very difficult to detect. For this reason, you should only use field symbols if you cannot achieve the same result using other ABAP statements.
For example, you may want to process part of a string where the offset and length depend on the contents of the field. You could use field symbols in this case. However, since the MOVE statement also supports variable offset and length specifications, you should use it instead. The MOVE statement (with your own auxiliary variables if required) is much safer than using field symbols, since it cannot address memory beyond the boundary of a field. However, field symbols may improve performance in some cases.
check the below links u will get the answers for your questions
http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3860358411d1829f0000e829fbfe/content.htm
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/field_sy.htm
http://searchsap.techtarget.com/tip/1,289483,sid21_gci920484,00.html
Syntax Diagram
FIELD-SYMBOLS
Basic form
FIELD-SYMBOLS <fs>.
Extras:
1. ... TYPE type
2. ... TYPE REF TO cif
3. ... TYPE REF TO DATA
4. ... TYPE LINE OF type
5. ... LIKE s
6. ... LIKE LINE OF s
7. ... TYPE tabkind
8. ... STRUCTURE s DEFAULT wa
The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas. See Cannot Use Untyped Field Symbols ad Cannot Use Field Symbols as Components of Classes.
Effect
This statement declares a symbolic field called <fs>. At runtime, you can assign a concrete field to the field symbol using ASSIGN. All operations performed with the field symbol then directly affect the field assigned to it.
You can only use one of the additions.
Example
Output aircraft type from the table SFLIGHT using a field symbol:
FIELD-SYMBOLS <PT> TYPE ANY.
DATA SFLIGHT_WA TYPE SFLIGHT.
ASSIGN SFLIGHT_WA-PLANETYPE TO <PT>.
WRITE <PT>.
Addition 1
... TYPE type
Addition 2
... TYPE REF TO cif
Addition 3
... TYPE REF TO DATA
Addition 4
... TYPE LINE OF type
Addition 5
... LIKE s
Addition 6
... LIKE LINE OF s
Addition 7
... TYPE tabkind
Effect
You can define the type of the field symbol using additions 2 to 7 (just as you can for FORM parameters (compare Defining the Type of Subroutine Parameters). When you use the ASSIGN statement, the system carries out the same type checks as for USING parameters of FORMs.
This addition is not allowed in an ABAP Objects context. See Cannot Use Obsolete Casting for FIELD SYMBOLS.
In some cases, the syntax rules that apply to Unicode programs are different than those for non-Unicode programs. See Defining Types Using STRUCTURE.
Effect
Assigns any (internal) field string or structure to the field symbol from the ABAP Dictionary (s). All fields of the structure can be addressed by name: <fs>-fieldname. The structured field symbol points initially to the work area wa specified after DEFAULT.
The work area wa must be at least as long as the structure s. If s contains fields of the type I or F, wa should have the structure s or at least begin in that way, since otherwise alignment problems may occur.
Example
Address components of the flight bookings table SBOOK using a field symbol:
DATA SBOOK_WA LIKE SBOOK.
FIELD-SYMBOLS <SB> STRUCTURE SBOOK
DEFAULT SBOOK_WA.
WRITE: <SB>-BOOKID, <SB>-FLDATE.
Related
ASSIGN, DATA
Additional help
Declaring Field Symbols

Could any one tell me that How can i create the service User ie j2ee SID

hi all,
In the implementation of SPNego Authentication schem in my portal system.
i want to create the service user ie .j2ee-<SID>.
<b>could any one tell me that How can i create the service User ie j2ee-<SID> in my visual administrator??</b>.
any help will be highly Appretiated .
thanks and regards.
vinit soni.

Vineet,
the user management tab opens in Read Only mode - thats why the button is coming as disabled. There is a button for switching into Edit mode - it looks like a pen / pencil on the top bar. Click on that - your "Create User" button would be enabled.
Also regarding creation of Service User via code level you can see <a href="https://www.sdn.sap.com/irj/sdn/thread?messageID=1057074">THIS</a> thread. And <a href="http://HERE">http://help.sap.com/saphelp_nw04/helpdata/en/f9/e3162ec55f4df6922d161f3785012a/frameset.htm</a>HERE[/url] is the SAP Help documentation on required permission settings.
Regards,
Shubhadip
Message was edited by:
Shubhadip Ghosh
Message was edited by:
Shubhadip Ghosh

Could any one tell me what is the difference between swfloader and module loader?

Hi All,
                      Could any one tell me what is the difference between SWFLoader and Module Loader in Flex3 in detail?

Hi,
ModuleLoader is a kind of strange API that is really just intended to look like SwfLoader for modules that contain a single visual component, and hides most of the module loading infrastructure, which is all about class factories.
What I mean by "only loaded once" is that if you have several places in the code that call the ModuleManager.getModule("url").load() call, it will only ever get loaded over the wire and interpreted once, subsequent "loads" will just re-dispatch pseudo-load events to the new client. In other words, the class factory is a singleton for a given url. Unloading is a totally different story. As you note, not everything is truly unloadable, because there may be lots of references to stuff in
the module that will keep it alive and un-GC'ed.
I suggest playing with the low-level API so that you understand the backing implementation, and this should help you understand the limits of ModuleLoader.
The main difference between modules and applications is that modules have lower overhead, and they only ever get loaded once, no matter how many times you load them. If you're using the ModuleLoader API, keep in mind that you're losing about half the functionality of the module system. I will assume that you are, because otherwise it would be obvious where to expose methods. You might want to play around with the lower level ModuleManager API just to get a hang of what's going on - ModuleLoader is a pretty thin veneer over the lower API.
                Basically, what you want to do is to have your module implement an interface, say IModuleWhatever.
Also try and refer to this link which was previously discussed in this forum..
http://forums.adobe.com/message/74404
Thanks,
Bhasker

Can any one explain about the SAP Testing process in Implementation Project

Can any one explain about the SAP Testing process to be carried out by BW Consultant in an Implementation Project which is in Testing Phase..

hi bharat,
Two types of testing is possible in bw
unit testing
integration testing
Integration testing - It is the phase of software testing in which individual software modules are combined and tested as a group. It follows unit testing and precedes system testing.
Integration testing takes as its input modules that have been checked out by unit testing, groups them in larger aggregates, applies tests defined in an Integration test plan to those aggregates, and delivers as its output the integrated system ready for system testing.
Unit testing - One part or the whole part of transfer rules , update rules, etc..
Integration testing - The whole data flow cycle to be tested
This link will give u detailed description
http://en.wikipedia.org/wiki/Software_testing
Stress testing in BI..
/people/mike.curl/blog/2006/12/05/how-to-stress-test-bw-the-easy-way
REFER THIS REG CATT
http://help.sap.com/saphelp_erp2005/helpdata/en/d7/e21221408e11d1896b0000e8322d00/frameset.htm
Check this doc on Unit Testing
unit testing
Look at the threads below :
Testing Methods in BW
Unit Testing in BW
How to do testing in BW
Hi...BW testing
Re: Hi...BW testing
Hi...BW testing
Pls refer following links...
http://help.sap.com/saphelp_nw04/helpdata/en/d7/e210c8408e11d1896b0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/3c/aba235413911d1893d0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/d7/e2123b408e11d1896b0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/d7/e2123b408e11d1896b0000e8322d00/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/721d6a73-0901-0010-47b3-9756a0a7ff51
https://service.sap.com/upgrade-bw
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7dc0cc90-0201-0010-4fa7-d557f2bd65ef .
https://websmp204.sap-ag.de/~sapdownload/011000358700009385902004E
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/67acb63d-0401-0010-b685-b1b87dd78892
Hope it helps you!
****Assign Points If Helpful****
Regards,
yunus

When ever I browse a news or cricbuzz app on my iphone5 it automatically brings up the jelly splash on the AppStore within 5 to 10 sec every time. Please could some one suggest of this is a virus or a bug. It is annoying.

When ever I browse a news or cricbuzz app on my iphone5 it automatically brings up the jelly splash on the AppStore within 5 to 10 sec every time. Please could some one suggest if this is a virus or a bug. It is annoying and does not allow me to browse anything on the net.

This is not due to malware. There is no known malware capable of infecting any iOS device, unless that device has been jailbroken.
I have seen one other report this morning of a similar issue. This could simply be due to a rogue ad on those sites. However, if it's happening on a number of other sites as well, you may be having some problems with your network. As an example of the sort of thing I'm talking about, see:
Brazilian internet service provider hacked
Although the following page is written for Mac users, and thus some of its advice is not appropriate for the iPhone, you can still find some good information on such problems here:
Eliminating browser redirects and advertisements

Hi i am unable to send mail from yahoo mail id.can any one help on this?

import javax.mail.*;
import javax.mail.internet.*;
import javax.activation.*;
import java.io.*;
import java.util.Properties;
public class MailClient
public void sendMail(String mailServer, String from, String to,
                             String subject, String messageBody,
                             String[] attachments) throws
MessagingException, AddressException
         // Setup mail server
         Properties props = System.getProperties();
         props.put("mail.smtp.host", mailServer);
         // Get a mail session
         Session session = Session.getDefaultInstance(props, null);
         // Define a new mail message
         Message message = new MimeMessage(session);
         message.setFrom(new InternetAddress(from));
         message.addRecipient(Message.RecipientType.TO, new InternetAddress(to));
         message.setSubject(subject);
         // Create a message part to represent the body text
         BodyPart messageBodyPart = new MimeBodyPart();
         messageBodyPart.setText(messageBody);
         //use a MimeMultipart as we need to handle the file attachments
         Multipart multipart = new MimeMultipart();
         //add the message body to the mime message
         multipart.addBodyPart(messageBodyPart);
         // add any file attachments to the message
         addAtachments(attachments, multipart);
         // Put all message parts in the message
         message.setContent(multipart);
         // Send the message
         Transport.send(message);
     protected void addAtachments(String[] attachments, Multipart multipart)
                     throws MessagingException, AddressException
         for(int i = 0; i<= attachments.length -1; i++)
             String filename = attachments;
MimeBodyPart attachmentBodyPart = new MimeBodyPart();
//use a JAF FileDataSource as it does MIME type detection
DataSource source = new FileDataSource(filename);
attachmentBodyPart.setDataHandler(new DataHandler(source));
//assume that the filename you want to send is the same as the
//actual file name - could alter this to remove the file path
attachmentBodyPart.setFileName(filename);
//add the attachment
multipart.addBodyPart(attachmentBodyPart);
public static void main(String[] args)
try
MailClient client = new MailClient();
String server="pop3.yahoo.com";
String from="[email protected]";
String to = "[email protected]";
String subject="Test";
String message="Testing";
String[] filenames = {"c:\\gopi.txt"};
client.sendMail(server,from,to,subject,message,filenames);
catch(Exception e)
e.printStackTrace(System.out);
while compliling this one its compiled succesfully but i am getting exception at run time like..D:\mail>java MailClient
Exception in thread "main" java.lang.NoClassDefFoundError: com/sun/activation/re
gistries/MailcapFile
at javax.activation.MailcapCommandMap.loadFile(MailcapCommandMap.java:275)
at javax.activation.MailcapCommandMap.<init>(MailcapCommandMap.java:128)
at javax.activation.CommandMap.getDefaultCommandMap(CommandMap.java:44)
at javax.activation.DataHandler.getCommandMap(DataHandler.java:136)
at javax.activation.DataHandler.getDataContentHandler(DataHandler.java:568)
at javax.activation.DataHandler.getContent(DataHandler.java:501)
at javax.mail.internet.MimeBodyPart.updateHeaders(MimeBodyPart.java:1253)
at javax.mail.internet.MimeMessage.updateHeaders(MimeMessage.java:2012)
at javax.mail.internet.MimeMessage.saveChanges(MimeMessage.java:1980)
at javax.mail.Transport.send(Transport.java:97)
at MailClient.sendMail(MailClient.java:35)
at MailClient.main(MailClient.java:72)
can any one help on this....plz
thanks in advance
Edited by: Konapalli.Gopi on May 20, 2010 5:42 PM

Something's wrong with your CLASSPATH.
If you're not using JDK 6, you need to include activation.jar in your CLASSPATH.
If you've got any other jar files that define the javax.mail.* or javax.activation.* classes
in your CLASSPATH (such as javaee.jar or j2ee.jar), remove them.

Can any one explain me about bursting in bi publisher

hi all
can any one explain me about bursting in bi publisher
i need with small example with screen shots
Thanks
Sreedhar

Hi,
http://blogs.oracle.com/BIDeveloper/2009/03/bursting_1.html
look into this http://www.strsoftware.com/blogs/oracle/2009/12/how-to-burst-and-deliver-documents-from-bi-publisher-enterprise/
Thanks,
Srikanth

Hi gurus, can any one explain me about Badi & Bapi with eg.?

Hi gurus,
Can any one explain me about Badi & Bapi with examples.
Regards
Raghu

Hi Raghu
1) Badis means:
The BAdIs of the enhancement concept are not treated as standalone objects, but are integrated in the overall concept. Thus, the tools for defining BAdIs are part of the Enhancement Builder included in the ABAP Workbench.
Transaction SE18, up to now the only entry point for defining classic BAdIs, now manages classic and new BAdIs. When an existing BAdI is displayed or changed, it analyzes whether the BAdI is a classic or a new one, and then switches to the respective tool. In the case of a new BAdI, this tool is the enhancement spot editor
2) Bapis means:
BAPIs can be called within the R/3 System from external application systems and other programs. BAPIs are the communication standard for business applications. BAPI interface technology forms the basis for the following developments:
Connecting:
New R/3 components, for example, Advanced Planner and Optimizer (APO) and Business Information Warehouse (BW).
Non-SAP software
Legacy systems
Isolating components within the R/3 System in the context of Business Framework
Distributed R/3 scenarios with asynchronous connections using Application Link Enabling (ALE)
Connecting R/3 Systems to the Internet using Internet Application Components (IACs)
PC programs as frontends to the R/3 System, for example, Visual Basic (Microsoft) or Visual Age for Java (IBM).
Workflow applications that extend beyond system boundaries
Customers' and partners' own developments
Thanks
Trinath

Can someone explain me this code?

Hi... pls explain me this code if possible.
try {
wdContext.nodeStateList().bind( (Z_Hress_P0006_State_Input)model.createModelObject(Z_Hress_P0006_State_Input.class));
wdContext.currentStateListElement().setI_Withemptyline(true);
wdContext.currentStateListElement().setI_Countrykey(
wdContext.currentCountryRecordsElement().getLand());
wdContext.currentStateListElement().modelObject().execute();

Pankak,
wdDoInit is a method in Web Dynpro controllers that ie executed when controller code is executed first time (initialized) its never run again in the lifespan of that controller (view controller, component controller, custom controller).
You can get some more introductory material about Web Dynpro here
https://www.sdn.sap.com/irj/sdn/developerareas/webdynpro?rid=/webcontent/uuid/063bc942-0a01-0010-e7ae-d138e97acb5a [original link is broken]
Also I would suggest you to buy the Inside Web Dynpro book.
http://www.sappressbooks.com/product.cfm?account=&product=H983
This book will help to make your web dynpro concepts solid. I am assuming you know java.
Regarding the point, i don't have much idea how to give the points, I assume when you close the question you can assign the points.
Regards,
Anand

Could any body explain the step by step procedure of creation of BOM in DP?

Hi,
Could any body explain the step by step procedure of creation of BOM in DP?
Is there any document available to create the step by step procedure?
Please mail to this Id:[email protected]
Regards,
Chow.

Look at this source
http://help.sap.com/saphelp_scm41/helpdata/en/62/944d40cef71059e10000000a155106/frameset.htm
The steps are very simple
(1) PreRequisite: There should be a SNP/PPDS PDS generated either from R3 BOM/Routing or APO IPPE object
(2) Use the transaction mentioned earlier- /SAPAPO/CURTO_GEN_DP - Generate DP Production Data Structure
Let us know If you are looking for the settings which are to be used in the transaction mentioned above
or
You need to know how to create the SNP/PPDS PDS or IPPE object
Regards
Kumar

Could any one explain me this code pls

Similar Messages

Maybe you are looking for