Could any one provide me with the links of file to file scenario using BPM

Could any one provide me with the links of file to file scenario using BPM

Hi,
omit RFC part
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Similar Messages

  • Hi could any one tell me if the proxy configuration is a must for file to

    hi could any one tell me if the proxy configuration is a must for file to  mail scenario

    Not needed at all.
    Proxy are used when integrating with a SAP system and in the case of a file to mail scenario all you need is a sendr file adapter and receivr mail adapter and a mail server in the same netwrok as you XI server.
    Regards
    Bhavesh

  • File to RFC scenario using BPM : a synchronous one

    Hi All
    I am doing File>RFC>File scenario using BPM with help of the blog
    RFC Scenario using BPM --Starter Kit
    here everything is explained but i am getting error while the processing of BPM part
    Input file is being picked (this part is success) but rest BPM and response i am not getting back in .
    interface names
    filereq_MI >Filetoabstract_MI>Sync_MI>RFCtoabstract_MI>Fileres_MI
    (abstract means its an abstract interface)
    i have configuered the Integration process as follows
    Start>Recieve>synch_send>send>end
    step :  Recieve
    mode : asynch
    message:Filetoabstract_MI
    step :  synch_send
    mode : synch
    synch interface : synch_send
    req message:Filetoabstract_MI
    res message : RFCtoabstract_MI
    step :  send
    mode : asynch
    message:RFCtoabstract_MI
    and i have given interface mapping during second (synch_send) step but here mapping is giving problem its showing exception error during mapping
    error is there
    1) Integration process ---> file
    2) Integration process-->R/3 system

    Hi,
    Configure the Integration Engine According to this Blog and Trigger the Process again
    Configuration of a Central Integration Server
    Regards
    Seshagiri

  • HT1904 has any one had problems with the apps disclaimer having no accept button??

    Has anyone had a problem with the Accept button not in the email for the apps store disclaimer

    This is not the first time it has rebooted. It has done so every so often since I had it. It has been occuring more often over the past few months and its not that uncommon to here of random reboots, I read through some of the threads about reboots and it either one thing or another and its not always the same apps that cause it, some have reboots with. Camera, I had them with led appps like droid light and led light. I still had reboots after uninstalling those apps. I read that people say its usually the apps that cause the problems but which ones. What ever it is one thing seems to be consistent is that the phone hangs or freezes and then reboot. There are always updates for apps, maybe some of the problems are with the device itself. Hope the next android version for the x fixes the reboot issues that has been happening. I know all phone will have some bugs and flaws and there will never be a perfect worry/problem free phone, that's what updates are for. The problem is some, if not all, manufacturers and carriers are slow to update their devices. Don't get me wrong im not bashing the x or Verizon because both have been good for me. I've had better than average service as far as network connectivity and the x is an overall great phone. If it is apps that cause most of the problems I would like to know which ones someone I cab stay away from them, sometimes the comments in the market are helpful but not always. Like the phone and can't see myself with any other phone, at least until the new phone with gingerbread come out or hopefully a gingerbread update for the droid x, not going to hold my breath

  • Any one having problems with the calandar within the last two days?

    Having problems with iPad 2 calendar , anyone else with this problem?

    What kind of problems? I am having no issues. Have you tried quitting the app completely and then restart the iPad?
    Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Or reboot the iPad?
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    If those don't help, post back with your specific issues.

  • Any one have issues with the 10.4.8? Any boot camp gaming issues?

    thanx!

    It's hard to know how many people are having problems based on postings here. But they airport issues may be serious. They made my system nearly unusable, and it's not yet clear that any of the various processes for reinitializing it have worked.

  • Any one having trouble with the dictionary in iBooks after downloading iOS 7?

    After downloading iOS7, dictionary in iBooks produces a "no definition found" response after every word i seek a definition for...anyone know how to fix it?

    When you elect to look up a definition, you will note a button (lower left of definition pop up) called Manage. Tap that, and select the dictionaries you wish to download.

  • Is any one have troubles with iMessage activation?

    Is any one have troubles with iMessage activation?

    What carrier are you using?
    I know there are issues with Telstra.

  • I could not remember my apple ID password so I made a request for a new one. When I received the email with the link on resetting my password it was addressed to John Ohare. My name is not John Ohare. Does this mean someone is hacked my iCloud account?

    I could not remember my apple ID password so I made a request for a new one. When I received the email with the link on resetting my password it was addressed to John Ohare. My name is not John Ohare. Does this mean someone has hacked my iCloud account?

    Hello Corinne Craven,
    Thank you for using Apple Support Communities!
    You can update the name on your Apple ID here:
    Appleid.apple.com
    If you suspect unauthorized access to your apple ID I would normally recommend resetting your password, but you have already done this.
    Here is some information about 2 step verification which is another level of security for your account.
    Apple ID: Frequently asked questions about two-step verification for Apple ID
    http://support.apple.com/kb/HT5570
    Be sure to read all the information in the article if you choose to use two-step verification.
    Take care,
    Sterling

  • Could any one tell me what is the difference between swfloader and module loader?

    Hi  All,
                          Could any one tell me what is the difference between SWFLoader and Module Loader in Flex3 in detail?

    Hi,
    ModuleLoader is a kind of strange API that is really just intended to look like SwfLoader for modules that contain a single visual component, and hides most of the module loading infrastructure, which is all about class factories.
    What I mean by "only loaded once" is that if you have several places in the code that call the ModuleManager.getModule("url").load() call, it will only ever get loaded over the wire and interpreted once, subsequent "loads" will just re-dispatch pseudo-load events to the new client.  In other words, the class factory is a singleton for a given url. Unloading is a totally different story.  As you note, not everything is truly unloadable, because there may be lots of references to stuff in
    the module that will keep it alive and un-GC'ed.
    I suggest playing with the low-level API so that you understand the backing implementation, and this should help you understand the limits of ModuleLoader.
    The main difference between modules and applications is that modules have lower overhead, and they only ever get loaded once, no matter how many times you load them. If you're using the ModuleLoader API, keep in mind that you're losing about half the functionality of the module system.  I will assume that you are, because otherwise it would be obvious where to expose methods.  You might want to play around with the lower level ModuleManager API just to get a hang of what's going on - ModuleLoader is a pretty thin veneer over the lower API.                
                    Basically, what you want to do is to have your module implement an interface, say IModuleWhatever.
    Also try and refer to this link which was previously discussed in this forum..
    http://forums.adobe.com/message/74404
    Thanks,
    Bhasker

  • Hi, I'm a new Mac user and I want 10.8.2 but i can't get that unless I have i have 10.8.1 and I cant get that unless I have 10.8. Now I was wondering if anyone could provide me with a link that would allow me to download this version?

    Hi, I'm a new Mac user and I want 10.8.2 but i can't get that unless I have i have 10.8.1 and I cant get that unless I have 10.8. Now I was wondering if anyone could provide me with a link that would allow me to download this version?

    Again, that's not a problem - if you purchase Mountain Lion through the App Store, it's been updated to 10.8.2 - and when there are other updates available, you can just download and install them as well.
    Just go to the App Store and purchase and install ML. Then run Software Update (Apple menu) to see if there are any updates available for your machine. I keep my System Preferences>Software Update prefs set to check automatically -
    Some people would rather check manually. No big deal, just buy it and install it.
    Clinton

  • My apple Tv will not airplay, this is the 3rd one i have exchanged and my devices airplay just fine elsewhere, could there be a problem with the wifi even though all of the other functions are working fine?

    My apple Tv will not airplay, this is the 3rd one i have exchanged and my devices airplay just fine elsewhere, could there be a problem with the wifi even though all of the other functions are working fine?

    Hello there, AntRambo.
    The following Knowledge Base articles may provides some steps to go over for troubleshooting your issue:
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/HT4199
    And also the following:
    iOS: Troubleshooting AirPlay and AirPlay Mirroring
    http://support.apple.com/kb/TS4215
    Particularly but not exclusively of note:
    If the AirPlay icon doesn't appear
    Ensure that you have followed the steps in using AirPlay and AirPlay Mirroring.
    If you are still unable to see the AirPlay icon  , try one of the following steps:
    If trying to AirPlay, or AirPlay mirror, to your Apple TV, ensure that AirPlay is enabled on your Apple TV as well. You can enable or disable AirPlay on Apple TV in the AirPlay menu: Settings > AirPlay.
    Check Internet or network connectivity on all affected devices. Some content requires an Internet connection to authorize content playback. AirPlay capabilities may be limited if your network is not connected to the Internet.
    If attempting to use AirPlay from a third-party app or a website from your Safari app on your iOS device, confirm that the app or website is AirPlay compatible (refer to the developers of the app or website for additional information).
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro

  • Please any one provide crystal report for  Location wise sales report with GP

    Please any one provide crystal report for  Location wise sales report with GP.Please its urgent

    A report writer tool like Crystal reports is not available due to the cost involved in its licenses.Do you think that Oracle Reports is free then? It's $$$$.
    You can download and test it for free, but if you want to use it in production you have to buy a license.

  • I bought Adobe Acrobat Pro 9 and I need to reinstall it. Please could you provide me with a link. (I

    I bought Adobe Acrobat Pro 9 (in 2011)and I need to reinstall it. Please could you provide me with a link for download for MAC OSX. (I have the serial number in my adobe account.)

    Hi Rebmay ,
    You can download the trial version of Acrobat IX pro from the below mentioned link and activate it with the serial number.
    http://prodesigntools.com/all-adobe-cs5-direct-download-links.html
    Notes : Please follow these important instructions carefully or the link will not work!
    Thanks!
    Eshant

  • Could any one give me direction towards creating asset with REST/javascript

    could any one give me direction towards creating asset with REST/javascript?

    There is a sample bundled with webcenter sites at Misc/articles. You have to implement the proxy controller which serve as proxy for xmlhttp request.
    The proxy will redirect the request actual REST resource in the target server

Maybe you are looking for

  • Problem retrieving Session variables in Flex from Coldfusion

    For about a year I've been using a cfc that allows me to remote call from within Flex to retrieve session-level variables.  I much prefer this to using FlashVars because with the remote call the session values don't show up in the page source. This w

  • Rules should be for complex rules

    Hi, Could you please help to write rules for following two business scenarios for following type of hierarchical data input to Oracle rule decision Function. 1. To make sure that InstanceId is unique across the data. (According to this sample, this r

  • Product's notebook d009tu

    please provide the help my brightness  control key not working.

  • Erreur lors d'utilsation d'un formulaire d'ajout avec une table view

    Bon soir !* je suis entrain de realiser une application de gestion des ressource humaine d une usine ds le cadre de projet fin d etude ds une page jspx j ai ajouter une formulaire et un tableau de la meme vue! plus trois bouton createinsert commit et

  • How to add US holidays to my Calendars

    This has got to be a no brainer.  Looks like my brain may be shrinking.  I just want US Holiday to routinely appear on my calendars.  Could not find anything in preferences or options.