Could anybody pls provide the solution for test condition for ceating deliv
Hi,
I am working one function module but I want some functional input (SD).
1. Create a domestic delivery.
2. Create ICB direct to customer delivery.
3. Create ICB PO replenishment delivery
4. Create ICB Atlas to Non Atlas.
5. Repeat the steps for gateout enabled and not enabled locations and perform billing. Check the billing log.
6. Repeat the tests with delivery with and without gateout info.
7. Create a POD adjustment document for over delivery scenario. Perform billing.
8. Perform billing using VF01 and VF04
So anbody can help me for functional input.
Waiting for quick response.
Best Regards,
BDP
Hi Reneta
For your requirement , Bonus Buy concept should be used. But the best way to meet your requirement is to go with a
new subroutine and assign to the discount condition type in your pricing procedure.But if there are several combination's of materials which can vary the reduction of the price then in the subroutine only you have to write the subroutine with the help of ABAPer that if any vary comes then system should check the prices and vary the prices also. So give your requirement to the ABAPer then he will fulfill your requirement.
Regards
Srinath
Similar Messages
-
Hi i want to add three reports so pls provide the solution
Hi Friends,
Actually iam having three reports so the requirement is i want to execute those three reports under one click ie... when iam executing first one the remaing two also wants to execute under that one only\
So pls provide the solution and at the same time logic also
Thanks & Regards
Mohan ReddyHello,
Create a new report eg ZTEST.
Put in following sample code
the sample code is.
submit <prog-name> with parameter1 = val1
with parameter = val2......and so on
Use the above statement 3 times and execute it.
All 3 reports will be executed 1 by 1 without user intervention.
Hope this helps,
Rajat -
When i open my itunes of recent edition 12.0, i am getting error as "itunes.exe has been set to run in compatabiltity mode " Though i reinstalled it several times from last days ,the problem is not solved. Please provide the solution asap.
Try iTunes for Windows: How to turn off Compatibility Mode.
tt2 -
Plz, could anybody send me the driver for VF0010 webcam for xp 64 bit?
Plz, could anybody send me the driver for VF000 webcam ? iam using xp 64 bit
my email is [email protected]
thanks in advanceyeah exactly
3000 N100-0768DKU
XP Home 5.01.2600 SP2
Ubuntu 8.04(hardy) -
"NOT solved" CO needs upgrading, can't provide the service I'm paying for.
For the record, I accepted the solution to my original post as advised by support, in an effort to be able to unlock the original post but it didn't work.
Please review the original post "CO needs upgrading, can't provide the service I'm paying for." for the beginning details of my issue.
Here's the update and final word from Verizon....
Worked on the issue in private support from 2/28/13 to 3/15/13. I was told my issue was submitted to the DSL escalation team & engineering group. I was told that it is a capacity issue at the CO, where upgrades are needed, so at the present time there is nothing more they can do until the upgrades are completed.
Needless to say, I'm not happy. Now I'm currently looking into compensation in the form of some type of reduction in my monthly fee until the issue is resolved at the CO and I'm able to get the speed I'm provisioned. Wish me luck this is my last option.
As I stated in my original post, I really have had a good relationship with Verizon up until now. Unfortunately, I'm not seeing a light at the end of the tunnel so I may have to make a change. I'll update this if anything changesThis is probably my final update...
I received a voice message in regards to my request for some compensation but there was nothing Verizon can do. The info given was that there was no estimated time for the upgrades to be completed. The offer was to down grade my plan to a lower provisioned speed & pay a lower rate. For both, it was not what I wanted to hear.
I wanted to keep my plan & provisioned speeds. I am & have been happy with my service & speed(when it's where it should be), it just that I'm not getting what I pay for at all times. Since there is no estimated time for upgrades (so that I get those provisioned speeds) I was inquiring about a possible adjustment in my monthly fees(maybe a few bucks off per month) until the upgrades are done. So now as I understand Verizons stance, I need to continue to pay the full price & Verizon won't be providing my provisioned speed. That just doesn't sound like a fair deal.
Unfortunately it appears that Verizon will now be loosing a long time customer, something I really wanted to avoid for the previously stated reasons. As I now look for an alternate ISP, I will continue to monitor my private support case in the hopes that something changes that will allow me to continue my relationship with Verizon as my ISP.
I want to thank everyone for their assistance in trying to resolve my issue, you have all been professional, courteous & helpful(as much as you could have been) in our communications, Kudos to all. -
Could anybody give me the logic in sales report
Hi All,
I have a sales report on multprovider. In this sales report, I want to find out how many customers had done the transactions in day.
<b>Two transactions for one customer in a day can be counted as one transaction</b>.
Could anybody give me the logic to how to find the total number of customers made transaction in a day.
Thanks in advance
NarendraHi Anil,
Thanks alot for your answer.
I am not sure, how the user is going to excute the report.however there is a <b>user entry Characterstic variable on 0CALDAY with selection options.</b>
For example :
If the user run the sales report from Calander Day from 01-06-2007 to 06.06.2007.
that means 4 business days (1st, 4th, 5th and 6th June). He wants to see the total number of customer done the transaction in a day separately, means 1st June how many customers, 4th June how many customers, 5th June how many customers, and 6th June how many customers.
Based on the user selections,how many customers per day made the transactions. could you please send me the logic.
My email Id is : [email protected]
<b>Note : Query <---- multiprovider <---- Infocube <---- ODS</b>
Thanks in advance
Narendra -
Hello All,
I am getting 'Out of memory' error while opening the file. I have tried several versions of Adobe 7.0,9.0,X1.
Also, it is creating issue to convert PDF into TIFF. Please provide the solution ASAP.I am using Adobe reader XI. When i open PDF it gives "OUT of memory" error after scrolling PDF gives another alert "Insufficient data for an image". after clicking both alerts it loads full data of PDF. It is not happening with all PDFs. couple of PDFs are facing this issue. Because of this error my software is not able to print these PDFS into TIFF. My OS in window7*64. I tried it on win2012R2 and XP. Same issue is generating there.
It has become critical issue for my production. -
I am getting following message displayed, for one of the website.
"Sorry, your browser/program is not supported by Web Dynpro! "
Please provide the solution
Regards
Rajesh R RakeshUse a browser that is supported.
-
Could you pls explain the "Get-Acl C:/Windows | fl" output?
Could you pls explain the "Get-Acl C:/Windows | fl" output? There are some nos. what are those indicate?
PS C:\> Get-Acl C:/Windows | fl
Path : Microsoft.PowerShell.Core\FileSystem::C:\Windows
Owner : NT SERVICE\TrustedInstaller
Group : NT SERVICE\TrustedInstaller
Access : CREATOR OWNER Allow 268435456
NT AUTHORITY\SYSTEM Allow 268435456
NT AUTHORITY\SYSTEM Allow Modify, Synchronize
BUILTIN\Administrators Allow 268435456
BUILTIN\Administrators Allow Modify, Synchronize
BUILTIN\Users Allow -1610612736
BUILTIN\Users Allow ReadAndExecute, Synchronize
NT SERVICE\TrustedInstaller Allow 268435456
NT SERVICE\TrustedInstaller Allow FullControl
Audit :
Sddl : O:S-1-5-80-956008885-3418522649-1831038044-1853292631-2271478464G:S-1-5-80-956008885-3418522649-1831038044-185
3292631-2271478464D:PAI(A;OICIIO;GA;;;CO)(A;OICIIO;GA;;;SY)(A;;0x1301bf;;;SY)(A;OICIIO;GA;;;BA)(A;;0x1301bf;;;
BA)(A;OICIIO;GXGR;;;BU)(A;;0x1200a9;;;BU)(A;CIIO;GA;;;S-1-5-80-956008885-3418522649-1831038044-1853292631-2271
478464)(A;;FA;;;S-1-5-80-956008885-3418522649-1831038044-1853292631-2271478464)
AliahMurfyThose numbers are
generic access rights.
The string representation of the access rights come from the FileSystemRights enumeration. Generic rights aren't included in that enumeration, so they show up as the numeric value. You can look up the generic mappings for lots of different objects on MSDN.
The 3.0 beta of
my access control module will translate generic access rights for lots of different objects, including files and folders. Here is a screenshot showing the generic rights being translated for a registry key (HKLM:\SOFTWARE) and a folder (C:\Windows):
The helper function that does the translation is temporarily accessible in the beta version. It is called New-AdaptedAcl. You can play around with it to get a better idea of what's going on (but this command will be private before the final 3.0 version is
released). Here's a screenshot of the helper function in action (the first command does no translation, it just gives a string representation of the numeric access mask; the second command does translation, but it doesn't merge similar ACEs with each other): -
Pls provide the screen shoots of transpoting script by using SCC1
Pls provide the screen shoots of transpoting script by using SCC1
Hi,
When you create a SAPScript in one client, it will ask for transport reuqest. You create that transport request.
Now you go to the client where you want to move the SAPScript. Go to transaction SCC1.
Enter your
- source client
- transport request here and just hit 'start immediately' button
Regards,
RS -
MY IPAD IS DISABLED I TRIED TO RESTORE IT BUT ITS SHOWING MESSAGE "The iPad could not be restored. the device isn't eligible for the request build"
Follow the steps here:
Error 3194, Error 17, or "This device isn't eligible for the requested build" - Apple Support -
"Unable to connect to server" when trying to accept the new terms and conditions for iCloud.
I keep getting "Unable to connect to server" when trying to accept the new terms and conditions for iCloud. What can I do? I can access the internet, but my clash of the clans applications is failing. The problem started January 1, 2014
I just figured out the problem with my grandma's iphone.
Settings>iCloud>Delete Account
IT WILL NOT DELETE YOUR ACCOUNT. it just takes it off the phone. then you can log back in, and BAM, You're good I hope!
Hope this helps. -
Can anybody give me the solutions for these
In the definition of Item Catogory vov7, thers is a field " Relevent for Delivery", The same field is there in the definition of Scheduleline catagory vov6.
1. Y the same field is there in both definitions?
2. If I didnt check the field in item catagory definition, then item cannot be deliver?
3.Y should we check in itemcatagory and scheduline catagory definition the field " relevent for delivery"
If i check in Item catagory , if i didnt check in scheduline catagory any problem occurs at the time of delivery
Plz reply me for these questions
Thanks in Advance
Venkat RamanaDear Venkata Ramana
- In VOV7, if you select the field "Relevant for Delivery", then you are defining that the item category is relevant for creating delivery and posting goods issue.
- Similarly, in VOV6, by selecting the field Relevant for Delivery, you are defining that the schedule line is relevant for delivery
As you would be aware, you can create invoice referencing order and delivery as well. So in order to differentiate the item category and schedule line category from this, you have to maintain different item categories and schedule line categories.
thanks
G. Lakshmipathi -
Could you pls give the details about the Unicode conversion during Upgrade
Hi,
Can anyone give details about the Unicode conversion during SAP Upgradation fro 4.6C to ECC6.
Waiting for quick response
Best Regards,
PadhyHi,
These are the few points i gathered during my upgradation project.
Before starting any upgradation project, it is necessary to take up the back-up of the existing systems. As we are going to upgrade the entire system, we will be changing so many things and if something happens, without back-up, we will be in a trouble.
So it is advised to keep a back-up of the existing system.
Say for example we have the existing system E4B which is of Version 4.6C. Now we want to upgrade it to Version 4.7. Let us see how we can do it.
Version upgrades not only means that we need to run the new Version CD over the existing Version System but only involves some other thing.
Version Upgrade involves the following Steps.
Say we want to upgrade for Version 4.7 from Version 4.6, which is in the System E4B. Now we created one more system called as E1B in which the upgradation for Version 4.7 can be done.
First copy the entire E4B system into the E1B System which is created for Version 4.7.
Apply the Version 4.7 CD provided by SAP over the E1B System.
Now check whether all the functionalities that was in E4B system works fine with E1B system also.
Thus the Version Upgrade involves two steps.
1. SAP Upgradation with the help of the CD
2. Manual Upgradation.
1. SAP Upgradation with the help of the CD
This is nothing but after taking the copy of the existing system into a new system, the upgradation CD from SAP is applied over the new system.
2. Manual Upgradation.
This Manual Upgradation involves
2.1 Upgradation of Standard Objects
2.1.1 SPAU Objects
2.1.2 SPDD Objects
2.2 Upgradation of Custom Objects.
Upgradation of Custom Objects can be placed under the following three categories.
Unicode Compliance
Retrofit
Upgrade
Please Find below some of the common Unicode Errors and their solutions
1. Error:
In case of Translate Error; Dangerous use of Translate in Multilingual system.
Correction:
To correct the Error occurring on TRANSLATE statement use this additional statement before the Translate statement.
SET LOCALE LANGUAGE sy-langu.
This statement defines the Text Environment of all the programs & internal sessions in the language specified in the LANGUAGE KEY, which in this case is sy-langu, i.e. the log on language of the user.
2. Error:
In case of Open Dataset Error; Encoding Addition must be included.
Correction:
This Error occurs only when the MODE is TEXT.
To correct the Error occurring on OPEN DATASET statement use this statement instead.
OPEN DATASET dataset_name FOR access IN TEXT MODE ENCODING DEFAULT.
Where: dataset_name NAME OF THE DATASET.
Access INPUT or OUTPUT or APPENDING or UPDATE.
DEFAULT - Corresponds to UTF-8 in UNICODE systems &
NON_UNICODE in NON-UNICODE systems.
3. Error:
In case of the usage of the Obsolete FM UPLOAD/DOWNLOAD or WS_UPLOAD/DOWNLOAD; Function module UPLOAD is flagged as obsolete.
Correction:
The FM GUI_DOWNLOAD/UPLOAD is used.
The variations to be made in the parameters of the FM:
1. Filename It must be of STRING type.
2. Filetype DAT is not used any longer, instead ASC is used.
3. Field Separator The default value SPACE is used, incase for a TAB separated file X can be used.
4. Error:
In case of CURRENCY/UNIT Addition Error; Use addition CURRENCY/UNIT when outputting.
Correction:
The CURRENCY addition specifies the currency-dependant decimal places for the output of the data objects of type i or p. To obtain the currency-key, the field CURRKEY of the table TCURX is used. The system determines the number of the decimal places from the field CURRDEC of the selected CURRKEY.
To correct this error follow the following method:
WRITE: /3 'TOTAL',' ', TOTAL.
WRITE: /3 TOTAL, , TOTAL CURRENCY 2. --- Where 2is the Currency Key for Getting 2 decimal places.
5. Error:
In case of TYPE X Error; Variable must be of C, N, D, T or STRING type.
Correction:
We need to change all the Type X (Hexadecimal) variables to Type C with their values unchanged.
So the method to be followed is:-
1. Load the definition of the class CL_ABAP_CONV_IN_CE or CL_ABAP_CHAR_UTILITIES.
2. Declare the variable as Type C, and use the method UCCP(XXXX) of the class CL_ABAP_CONV_IN_CE where XXXX represents the 8-bit Hexadecimal value and incase the variable holds a Hex value for a Horizontal Tab , then the Attribute HORIZONTAL_TAB of the class CL_ABAP_CHAR_UTILITIES can be used directly instead of using the method UCCP.
E.g.:
i) *DATA: TAB TYPE X VALUE 09, Tab character
CLASS: CL_ABAP_CHAR_UTILITIES DEFINITION LOAD.
DATA TAB TYPE C VALUE CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
ii) * DATA: CHAR TYPE X VALUE 160.
CLASS: CL_ABAP_CONV_IN_CE DEFINITION LOAD.
DATA CHAR TYPE C.
CHAR = CL_ABAP_CONV_IN_CE=>UCCP(00AO).
(Here 00A0 is the Hexadecimal equivalent of the decimal 160).
3. Incase the TYPE X Variable has a length more than 1, then an internal table must be created for the variable.
E.g.:
CLASS: CL_ABAP_CONV_IN_CE DEFINITION LOAD.
DATA : LF(2) TYPE X VALUE 'F5CD'.
DATA : BEGIN OF LF,
A1 TYPE C,
A2 TYPE C,
END OF LF.
LF-A1 = CL_ABAP_CONV_IN_CE=>UCCP('00F5').
LF-A2 = CL_ABAP_CONV_IN_CE=>UCCP('00CD').
6. Error:
In case of the Character -Error; The Character -cant appear in names in Unicode Programs.
Correction:
The Character -(Hyphen) appearing in Variable names is replaced by the character _ (Under Score) for Unicode/Upgrade Compliance.
E.g.:
*wk-belnr LIKE bkpf-belnr,
*wk-xblnr LIKE bkpf-xblnr,
*wk-date LIKE sy-datum,
*wk-wrbtr LIKE bseg-wrbtr,
*wk-name1 LIKE lfa1-name1,
*wk-voucher(8) TYPE c.
wk_belnr LIKE bkpf-belnr,
wk_xblnr LIKE bkpf-xblnr,
wk_date LIKE sy-datum,
wk_wrbtr LIKE bseg-wrbtr,
wk_name1 LIKE lfa1-name1,
wk_voucher(8) TYPE c.
7. Error:
In case of The SUBMIT-TO-SAP-SPOOL Error; you should not use the statement SUBMIT-TO-SAP-SPOOL without the WITHOUT SPOOL DYNPRO addition.
Correction:
1. Declare variables of type PRI_PARAMS, ARC_PARAMS, and a variable of TYPE C which would be used as a VALID FLAG.
2. Call the FM GET_PRINT_PARAMETERS:
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
ARCHIVE_MODE = '3'
DESTINATION = P_DEST
IMMEDIATELY = 'X'
IMPORTING
OUT_ARCHIVE_PARAMETERS = archive_parameters
OUT_PARAMETERS = print_parameters
VALID = valid_flag
EXCEPTIONS
INVALID_PRINT_PARAMS = 2
OTHERS = 4
3. Use the SUBMIT-TO-SAP-SPOOL statement.
E.g.:
submit zrppt500
using selection-set 'AUTO3'
with res_no eq lo_rsnum
with sreserv in preserv
to sap-spool destination p_dest
immediately 'X'. "print immediate
DATA: print_parameters type pri_params,
archive_parameters type arc_params,
valid_flag(1) type c.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
ARCHIVE_MODE = '3'
DESTINATION = P_DEST
IMMEDIATELY = 'X'
IMPORTING
OUT_ARCHIVE_PARAMETERS = archive_parameters
OUT_PARAMETERS = print_parameters
VALID = valid_flag
EXCEPTIONS
INVALID_PRINT_PARAMS = 2
OTHERS = 4
Submit zrppt500
Using selection-set 'AUTO3'
With res_no eq lo_rsnum
with sreserv in preserv
to sap-spool
SPOOL PARAMETERS PRINT_PARAMETERS
ARCHIVE PARAMETERS ARCHIVE_PARAMETERS
WITHOUT SPOOL DYNPRO.
8. Error:
In case of Message Error; Number of WITH fields and number of Place Holders are not same .
Correction:
Split the statement after WITH into the same number as the place holder for that Message ID.
E.g.:
1. * MESSAGE E045.
MESSAGE E045 WITH '' ''.
2. in program ZIPI0801
Start of change for ECC6
message e398(00) with 'Could not find access sequence'
'for condition type:'
p_ptype.
message e398(00) with 'Could not find '
'access sequence'
'for condition type:'
p_ptype.
End of change made for ECC6
9. Error:
In case of Move between 2 different Structures; The structures are not mutually convertible in a Unicode program.
Correction:
Make both the Data Types compatible and then assign the contents.
E.g.:
The statement move retainage_text to temp_text. Gives an error, where RETAINAGE_TEXT is an internal table and TEMP_TEXT is a string of length 200.
A Feasible solution for this is to specify from which position to which position of the string, the fields of RETAINAGE_TEXT should be assigned.
TEMP_TEXT+0(1) = RETAINAGE_TEXT-DQ1.
TEMP_TEXT+1(1) = RETAINAGE_TEXT-HEX.
TEMP_TEXT+2(20) = RETAINAGE_TEXT-FILLER1.
TEMP_TEXT+22(15) = RETAINAGE_TEXT-AMT_DUE.
TEMP_TEXT+37(8) = RETAINAGE_TEXT-TEXT.
TEMP_TEXT+45(10) = RETAINAGE_TEXT-DUE_DATE.
TEMP_TEXT+55(1) = RETAINAGE_TEXT-DQ2.
10. Error:
In case of no description found; add a GUI title.
Correction:
In this type of error gui title is generally missing so add a GUI title to the module pool.
11. Error:
In case of writing internal or transparent table
Correction:
Write individual fields.
E.g.:
WRITE: / EXT. --> EXT should be a character type field
WRITE: / EXT-ZZSTATE, EXT-LINE_NO, EXT-LINE_TXT, EXT-AMT, EXT-ZZSKUQTY.
12. Error:
In case of combination reference table/field S541-UMMENGE does not exist
Correction:
Was due to error in reference table S541. TABLE S541 has errors
1)Foreign key S541- ZZMARKET (ZZMARKET AND KATR2 point to different domains)
2)Foreign key S541-ZZACQUIGRP (ZZACQUIGRP AND KATR8 point to different domains)
Changed the domain of ZZMARKET (from ZMKCODE to ATTR2)
And that of ZMKCODE (from ZACCODE to ATTR8)
13. Error:
In case of KEY does not exist
Correction:
The reference table for field KBETR was KNOV earlier changed it to RV61A as KNOV was in turn referring to RV61A.
14. Error:
Incase of WRITE statement, Literals that take more than one line is not permitted in Unicode systems.
Correction: To correct this error, we need to align the spaces accordingly so that the statement doesnt go beyond the line.
15. Error:
Incase of Data statement, The data type ZWFHTML can be enhanced in any way. After a structure enhancement, this assignment or parameter might be syntactically incorrect ..
Correction: To correct this error, instead of like in the Data statement, use type.
16. Error:
Incase of DESCRIBE statement, DESCRIBE can be used only with IN BYTE... Or IN CHARACTER mode in Unicode systems.
Correction: To correct this error, use additional text, IN BYTE MODE / IN CHARACTER MODE along with this statement.
CHARACTER MODE is added when the data object is of flat/ character type.
BYTE MODE is added when the data object is a deep structure.
Syntax: DESCRIBE FIELD data_obj : LENGTH blen IN BYTE MODE,
LENGTH clen IN CHARACTER MODE.
Where blen and clen must be of type I.
17. Error:
Incase of DO-LOOP Error, In Do loop range addition needed
Correction:
An internal tables is declared and the two fields (VARYING field and NEXT field) were
Included inside the internal table
E.g.: In program SAPMZP02
DO 11 TIMES
VARYING STATION_STATE FROM STATION1 NEXT STATION2. ECC6
CASE SYST-INDEX.
WHEN 1
STATION_STATE = STATION1.
WHEN 2
STATION_STATE = STATION2.
WHEN 3
STATION_STATE = STATION3.
WHEN 4
STATION_STATE = STATION4.
WHEN 5
STATION_STATE = STATION5.
WHEN 6
STATION_STATE = STATION6.
WHEN 7
STATION_STATE = STATION7.
WHEN 8
STATION_STATE = STATION8.
WHEN 9
STATION_STATE = STATION9.
WHEN 10
STATION_STATE = STATION10.
WHEN 11
STATION_STATE = STATION11.
18. Error:
Incase of the parameter QUEUE-ID Error, QUEUE-ID is neither a parameter nor a select option in program rsbdcbtc.
Correction:
The parameter in program rsbdcbtc is QUEUE_ID and so is changed in this program
E.g.: In program Z_CARRIER_EDI_INTERFACE
submit rsbdcbtc with queue-id = apqi-qid and return. "ECC6
The parameter name changed by replacing '-' with '_' as in program rsbdcbtc "ECC6
Submit rsbdcbtc with queue_id = apqi-qid and return. "ECC6
19. Error:
Incase of EPC Error, Field symbol <TOT_FLD> is not assigned to a field .
Correction:
This error couldn't be rectified as the error occurs in a Standard SAP include- LSVIMF29.
The OS Note - 1036943 needs to be applied.
Error:
OPEN DATASET P_FILE FOR OUTPUT IN TEXT MODE.
Correct:
OPEN DATASET P_FILE FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
Error:
Constants : c_tab type x value '09' .
Correct:
Constants : c_tab type abap_char1 value cl_abap_char_utilities=>horizontal_tab .
Error:
Data : begin of output_options occurs 0 . Include structure ssfcompop.
Data : end of output_options .
Correct:
Data : output_options type standard table of ssfcompop with header line .
Error:
PARAMETERS : NAST TYPE NAST .
Correct:
PARAMETERS : NAST TYPE NAST NO-DISPLAY .
Replace WS_DOWNLOAD and WS_UPLOAD by
GUI_UPLOAD and GUI_DOWNLOAD and check the import and export parameter types , do the changes accordingly. Because FILENAME paramater type is different because of this it will give dump.
For issue during Issue using SO_NEW_DOCUMENT_ATT_SEND_API1 Function module, the solution is After this FM we should put COMMIT WORK.
Issue:
Moving data from one structure to another structure if those two structures are not compatible
Solution:
we should use move-corresponding or field by filed we need to move it.
If database structures are different in 4.6c and ECC6.0,
Then we should go with append structure concept.
While testing the report if it gives dump at Select query level or any database or view level,then just goto that table or view and goto the data base utility(se14) adjust the database. But make sure that selected radio button in se14 transaction should be activate and adjust database
Also Check this link.
http://help.sap.com/saphelp_nw04/helpdata/en/62/3f2cadb35311d5993800508b6b8b11/frameset.htm
Reward points if helpful.
Regards,
Ramya -
More:Could u pls complete the following code by adding a class constructor?
Thank you for your concern about my post. Actually it is an exercise in book "Thinking in Java, 2nd edition, Revision 12" chapter 8. The exercise is described as below:
Create a class with an inner class that has a nondefault constructor. Create a second class with an inner class that inherits from the first inner class.
And I make some changes for the above exercise requiring the class which encloses the first inner class has a nondefault constructor.
There is something related to this topic in chapter 8 picked out for reference as below:
Inheriting from inner classes
Because the inner class constructor must attach to a reference of the enclosing class object, things are slightly complicated when you inherit from an inner class. The problem is that the �secret?reference to the enclosing class object must be initialized, and yet in the derived class there�s no longer a default object to attach to. The answer is to use a syntax provided to make the association explicit:
//: c08:InheritInner.java
// Inheriting an inner class.
class WithInner {
class Inner {}
public class InheritInner
extends WithInner.Inner {
//! InheritInner() {} // Won't compile
InheritInner(WithInner wi) {
wi.super();
public static void main(String[] args) {
WithInner wi = new WithInner();
InheritInner ii = new InheritInner(wi);
} ///:~
You can see that InheritInner is extending only the inner class, not the outer one. But when it comes time to create a constructor, the default one is no good and you can�t just pass a reference to an enclosing object. In addition, you must use the syntax
enclosingClassReference.super();
inside the constructor. This provides the necessary reference and the program will then compile.
My previous post is shown below, could you help me out?
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
//Could you please help me complete the following code by generating
// the Test class constructor to ensure error free compilation? Please
// keep the constructor simple just to fulfill its basic functionality
// and leave the uncommented part untouched.
class Outer {
Outer (int i) {
System.out.println("Outer is " + i);
class Inner {
int i;
Inner (int i) {
this.i = i;
void prt () {
System.out.println("Inner is " + i);
public class Test extends Outer.Inner {
// Test Constructor
// is implemented
// here.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++Test(Outer o, int i) {
o.super(i);
}Note that this doesn't quite answer the question from Thinking In Java, since your Test class is not an inner class (though there is no difference to the constructor requirements if you do make it an inner class).
Maybe you are looking for
-
We use CUA from our SOLMAN in a R/3 4.7 environment. During a workday we get printouts of a 2 page report. The reports are printet automatically (more than 50 a day..). 1. page: User, Host, Class 2. page:IDOC nr, USERCLONE, Serie-Info, ST, Descriptio
-
Automatically reposition layers/files in a grid by name
I've got about a hundred sets of sliced up pictures. Sliced up into roughly 80 pieces. They've been cut up in a grid fashion and then named logically & numerically by column and row. And saved to individual jpgs. Simple enough, I can just reposition
-
Prolem when generating bitstream for OpenSparc T1 1.7 EDK design
Hi, I tried to generate a bitsream (with XPS) for the ml411 system (without yet connecting to the platform). It failed and I couldn't find how to fix it. It is said "unknown -intstyle option" Here after are some parts of the console output (I can't p
-
J2ME Wsdl Client Help!! Please!!!!!!!!!!
Hey guys, i was wondering could any one help me.. i've basically used c# to create a wsdl that is deployed on iis. my question is how exactly do i use java (j2me) to access and use the wsdl? the wsdl retreives info from an oracle database.. can anyon
-
Hi all, Can somebody help me in creating production order. After putting the name of Material, Plant and Order type(PP01) system shows a error: Material ... not found in Plant 1000(check entry). The thing is I entered product in master data which I c