Could anyone help me with this problem?
Hello!
I�m a working with JMS Tutorial of Jms.(J2EE 1.3.1). I follow all the steps of the tutorial, and when i write
"java -Djms.properties=%J2EE_HOME%\config\jms_client.properties SimpleQueueSender MyQueue 3"
The console shows me the following error:
"Exception in thread "main" java.lang.NoClassDefFoundError: Files\s1studio\ee\j2s
dkee1/3/1\config\jms_client/properties"
I don�t know hot to fix this error. The classpath, and all the variables are correctily defined. I use XP o.s., jdkse 1.4 and j2see 1.3.1, and i repeat, i follow the steps of the tutorial. Could anyone help me?
Many Thanks.
Note: Sorry for my poor English.
Well, it looks as if somehow your command window is converting periods into forward slashes, since "1.3.1" appears in the output as "1/3/1" and "jms_client.properties" appears as "jms_client/properties". That is why the file is not found. If you can figure out how to stop it from doing this, the java command should be able to find the file. I'm afraid I know nothing about Windows XP command windows, however.
I'm sorry not to be more helpful.
Kim Haase
Technical Writer
Sun Microsystems, Inc.
Similar Messages
-
Hi, I'm using a white iPhone 4s with 16gb memory and having some problems. Whenever I use earphones the sound will be heated when the volume is at the highest if I turn it down any lower all I hear is static. Can anyone help me with this problem as I would appreciate it much.
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
No data is lost due to a reset. -
my ipod nano 7th generation won't play anything and when i click "radio" it says to plug in headphones when they're in. Can anyone help me with this problem?
Get a flashlight and make sure there is no obstruction/dirt/debris in the Nano headphone jack. Be sure you plug the headphones all the way in, the plastic on the headset jack should be flush with the body of the Nano.
-
the flashing light next too the camera is stays on,can anyone help me with this problem.thanks
Basics from the manual are restart, reset, restore. Have you tried these?
Have you read the manual? -
I just loaded Lion oxs 10.71 on my I-mac computer, and now my Logic 9 software wont show up it says its not compatible also i cant find my macintosh harddrive icon that is usually shown on dektop and device browser column can anyone help me with this problem.
Mike,
I had a similar issue with Photoshop when I upgraded to both Snow Leopard and Lion. it turned out to be Rosetta is no longer present in the newer OS. Once I upgraded to Lion, Appleworks stopped working after all these years. -
Good morning to all of you
I have A mac and I did the mistake of upgrading my Lightroom 5.4 to 5.6 Now I can't import anything it says "Could not find namespace: AgCreativeCloudUtils"
Could anyone help me resolve this problem?
Should I uninstall the program and reinstall it
Thank you so muchI asked because an awful lot of people have recently been confused between downloading the Cloud and the perpetual versions of Lr - although I'm not automatically assuming your'e guilty of this - and can't understand why their serial no won't unlock their new software.
If the wrong version has been installed, then it must be uninstalled and the right one downloaded. -
Everytime I connect my Iphone to my computer, it syncs, then soon after disconnects, then reconnects, and so on....Does anyone know why it's doing this? It makes it hard to back things up and charge it. I checked and my iTunes and iPhone software are updated and my computer is only 6 months old....help please!
Reasons for Drive Failure
Hard drives are mechanical devices with moving parts, so they are subject to expected wear and tear, and can potentially fail mechanically at any given time. But most manufacturers will label their product with an expected average lifespan (usually provided in total expected number of functioning hours). But if a part is faulty or there are some manufacturing defects, a drive's lifespan can be over in as little as a day. Other factors are primarily external in nature. Power surges can cause drive failure, as can fire or water damage, along with a number of computer viruses. Exposure to high levels of magnetism can disrupt the normal functions of a drive, along with sharp impacts. If dust gets into a drive, it can become the catalyst for an eventual failure.
You could try to boot with this. It will test your HD!
I would say your HD is toast!http://www.seagate.com/support/internal-hard-drives/consumer-electronics/ld25-series/seatools-dos-ma...
Read more: http://www.ehow.com/about_5087073_causes-hard-drive-fail.html#ixzz2aOMvlQ8w
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward. -
Can anyone help me with this problem?
Okay, here's the deal. My girlfriend's Toshiba laptop fell off her nightstand, and took a 2.5 foot fall to her hard wooden floor. It landed on the right side, which as you all probably know has both the hard drive and DVD drive. Setting aside the fact that it happened, let me explain the dilemma.
It powers up, but won't boot windows 7. I immedately think the hard drive is f*cked, but I'm not sure. It shows the Toshiba screen for a couple seconds, where you can enter BIOS. After that, it goes to a black screen with a blinking underscore at the top left hand corner. It then stays that way indefinitely, with the underscore eventually going away to where it's nothing but a black screen (but lit up, not black like when it's turned off).
I am convinced it won't pass POST. However, I'm not sure if it's the hard drive or the DVD drive. Here's why:
When I enter BIOS, I tried switching the primary drive check in the Boot tab, to where it checks the DVD drive first. Then when I restarted it, it would give me a message saying "drive failed to boot (dvd drive name here, can't remember off the top of my head)'". Does this mean the DVD drive is now defective, or does it fail to boot because of a lack of connection from the hard drive, which might be defective? If I keep the hard drive set as the primary drive being checked during bootup, I don't get that message. When I see her again, I will see if I can swap out her hard drive with the one from my laptop, assuming they have the same sockets.
I'm wondering, can a defective DVD drive keep a computer from loading the OS, or is it just the hard drive? I'm an amateur when it comes to computers, so these are the questions I don't know the answer to. One other thing to mention, is I disabled the DVD drive in BIOS, and it still wouldn't load windows 7. That's why I'm leaning towards a defective hard drive.
But, I'm not certain. I'm at a loss as to which it could be, or if it's even one of the two drives. Any help or other recommended procedures to do an at-home diagnostics check would be greatly appreciated. The model is a Satellite a665.
Thanks in advance, I really do appreciate any input!Reasons for Drive Failure
Hard drives are mechanical devices with moving parts, so they are subject to expected wear and tear, and can potentially fail mechanically at any given time. But most manufacturers will label their product with an expected average lifespan (usually provided in total expected number of functioning hours). But if a part is faulty or there are some manufacturing defects, a drive's lifespan can be over in as little as a day. Other factors are primarily external in nature. Power surges can cause drive failure, as can fire or water damage, along with a number of computer viruses. Exposure to high levels of magnetism can disrupt the normal functions of a drive, along with sharp impacts. If dust gets into a drive, it can become the catalyst for an eventual failure.
You could try to boot with this. It will test your HD!
I would say your HD is toast!http://www.seagate.com/support/internal-hard-drives/consumer-electronics/ld25-series/seatools-dos-ma...
Read more: http://www.ehow.com/about_5087073_causes-hard-drive-fail.html#ixzz2aOMvlQ8w
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward. -
I can sync icloud calender with pc based outlook calender. Photos also sync. But can not sync contacts. Already checked contact boxes in icloud and and on my PC. Also tried to reset Document & Data on icloud. Could anyone help me on that?
That's what I did... switching on iCloud calender in the panel leads to the following: The existing local Outlook calendar gets mved to an new iCloud calendar.Thus the local calendar is empty.
Given that iTunes dows not allow my whife's phone to be synced with that iCloud calendar (only the local acalendar appears in the list of available calendars in iTunes; syncing all dioes not include the iCloud one) this leads to an empty alendar on my whife's phone.
Hence the question how to
a) get iTunes to include the iCloud calendar to sync with the iPhone 2g (preferred) or
b) enable a local MS Outlook internal sync between the two calendars. -
iv moved all the music over thought home sharing... from the old itunes i was using but i want to be able to sync my iphone with the new itunes on my new machine but its saying saying syncing setp 1 of 1 and nothing happens... could someone please help me with this?
Copy the entire iTunes folder from the old computer to the new computer.
-
I have a problem with loading the application by the name of "hayday".after the latest update,in the middle of connecting to the servers,it crashes and comes bck to the home screen of my ipad.
I have and ipad II wifi, ios 4.3, and an ipod touch 4th generation,and i have the same problem on both of them.
Please someone,anyone help me with it.Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
I jus puchased an airtel 3g connection in india and the software that comes bundled with the huawei E1731 modem only supports upto snow leopard. I downloaded various drivers and installed them succesfully but the modem does not get detected. i am on lion 10.7.4 and a 2012 macbook air....how do i do this....please help...
hi, i was facing this problem from past few days...solution... WE JUST HAVE TO USE A USB 2.0 HUB... this solved my problem....E1713 is not able to connect to usb 3.0 as it does with 2.0.
-
My art work isn't matching the song on my ipod 5, can anyone help me with this problem
I have the Ipod touch 5 and my art work isn't matching the song that's being played. For example if Im listening to Jay-Z, Fantasia's art work will appear. Has anyone else experienced this problem? If so how did you resolve it?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
Can anyone help me with this problem?? Internet and Picture mail stopped working?
I just got my blackberry curve (8330) about a month ago, and about two weeks ago, my internet and picture mail just stopped working. I get the message with the picture in it, but it says I cannot retrieve it. And then when I try to send a picture message, it always fails. As for my internet, it will take f o r e v e r to load, then it will say there is a connection error. And I went to manage connections and it says that I'm not connected to the blackberry internet or enterprise server. I've tried "provisioning it" because that is what the person I talked to on the sprint website said to do, but it loads for a few minutes and then says "Provisioning cancelled..."
Has this happened to anyone else?? How do you fix it?Hi and Welcome to the Forums!
I suggest the following steps:
1) Register HRT
Homescreen > Options > Advanced Options > Host Routing Table > BBKey (it does not matter which line is current) > Register Now
2) Resend Service Books
KB02830 Send the service books for the BlackBerry Internet Service
3) Batt Pull Reboot
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Is there anyone have the same problem?
Actually, if I read the release announcement correctly, it is available on "new" purchases." So even if you had a 5 from before the announcement, I'm not sure you would qualify.
Maybe you are looking for
-
Illustrator CC 2014 won't let me save.
When creating a document in Illustrator CC 2014 (PC version), it will not let me save when either using the drop down menu and/or using the quickkey. I also noticed I can not open a file when using the same methods. I have quit the program and also r
-
How Hash tables can be used in PI mapping
Hi Experts, I'm don't have any idea how we store the values in hash tables and how to implement them in mapping. In my scenario I have two fields matnum and quantity.if matnum is not null ,then we have to check whether the matnum exists in hash table
-
Ava.lang.IllegalArgumentException: No bean specified
config <form-beans> <form-bean name="FileUpload" type="roseindia.net.StrutsUploadForm"/> </form-beans> <action-mappings> <action path="/FileUpload" type="roseindia.net.StrutsUploadAction" name="FileUpload" scope="session" validate="true" input="
-
View of a large Document in a JTextComponent
Does a JTextComponent build a View of the entire Document or only the small portion of the Document that's actually visible on the screen?
-
Is there anything I can do for my iPod Classic that got washed with a load of laundry?
Is there anything I can do for an iPod Classic that got washed with a load of laundry? Sincerely appreciate any feedback