Could anyone share SRM 5.0 Install Guide. tks!

Hi,
Maybe it help you.
Master Guide: https://websmp103.sap-ag.de/~sapidb/011000358700003030762005E/MG_SRM50_V1-6.pdf
Upgrade Master Guide: https://websmp103.sap-ag.de/~sapidb/011000358700003030772005E/UMG_SRM50_V1-5.pdf
Rgs,
Pedro Marques

Similar Messages

Could anyone point me to a beginners guide to code in XCode?

I am going to learn how to code, and I am using the lastest version of xCode.
If someone could point me to a guide for total beginners, that would very helpful to me!

http://www.raywenderlich.com/ - Sign up for his free monthly newsletter (sidebar on the right) and you get a free copy of The iOS Apprentice - Part 1. He also has a lot of other free tutorials posted there as well. Highly recommended, I'm working through some of them right now!

Can anyone share a simple OCR example?

I'm putting together a simple OCR application in 8.2 and IMAQ - snap an image, define the ROI, unwrap, then perform OCR. I'm not finding any useful information on the NI site as to how to put this together. Could anyone share a simple example?

How did you not find them helpful? You need to elaborate on what exactly you want to get done if you need help on these forums.
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies

Could anyone of you please who has a clean install of Windows 8.1 on the SSD drive look at some settings of certain services (below)?

Hi everyone,
could anyone of you please
who has a clean install of Windows
8.1 on the SSD drive look at some settings
of certain services (below)?
Thank you.
Prefetch and Superfetch. In registry located on way
HKEY_LOCAL_MACHINE\SYSTEM \CurrentControlSet\ Control\ SessionManager \MemoryManagement \PrefetchParameters.
I am interested in EnablePrefetcher and
EnableSuperfetch REG_DWORD value.
Just a number in parentheses.
ReadyBoot. In registry located on way HKEY_LOCAL_MACHINE\SYSTEM \CurrentControlSet\Control \WMI\Autologger\ReadyBoot.
I am interested REG_DWORD value of
Start. Just a number in parentheses.
Run dfrgui command. Go to Change settings and have a look if SSD on which is the system installed is included in regular optimalization schedule.
Registry can be accessed running regedit command.

Hi,
Prefetch and Superfetch means that most commonly used files are stored to disk to be more quickly accessed later.
For Prefetch:
Disable Caching: 0
Cache Applications Only: 1
Cache Boot Files Only: 2
Cache Everything (default): 3
For SuperFetch:Disable Caching: 0
Cache Boot Processed Only: 1
Cache Applications Only: 2
Cache Everything (default): 3
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\WMI\Autologger\ReadyBoot\Start value means:
disable: 0
enable: 1
For more information about clean installation of Windows 8.1 on SSD, I suggest you read below article:
Windows 8.1 SSD Settings, Etc.
http://www.tweakhound.com/2013/11/02/windows-8-1-ssd-settings-etc/
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Karen Hu
TechNet Community Support

Can anyone tell me where to find an install guide for the Liveoffice app.

Can anyone tell me where to find an install guide for the Liveoffice app.
Thanks
Jeff

Hi Jeff,
You can download the install guide for Liveoffice application from the link provided below,
http://help.sap.com/businessobject/product_guides/boexi/en/boXI_LiveOfficeInstall_en.pdf
Hope this helps you.
Regards,
Abhijeet T.

I erase my mac book pro to factory setting and cannot re-install the software. I received a message saying my Apple ID has not yet used with the App store. Please review your account information. Could anyone help please. I need to re-install my os.

I erase my mac book pro to factory setting and cannot re-install the software. I received a message saying my Apple ID has not yet used with the App store. Please review your account information. Could anyone help please. I need to re-install my os.

Use Internet Recovery. You shouldn't need an AppleID. http://support.apple.com/kb/ht4718
Internet Recovery will install the OS that shipped with the Mac. You can then upgrade to Mavericks if that was not it.
Do you have an App Store account? Did you ever use it to install the OS?

Could anyone advise on installing JAI?

Hello,
I recently installed the latest version of the JAI, on windows.
The classes have three .jar's which I added to the classpath:
jai1.1.2\lib\jai_codec.jar
jai1.1.2\lib\jai_core.jar
jai1.1.2\lib\mlibwrapper_jai.jar
But there is also a .exe checkmmx.exe provided and two .dll files:
mlib_jai.dll
mlib_jai_mmx.dll
Could anyone advise where the .exe and the .dll files should be placed?
Thank you

I made sure the installation was the windows version and the version which set the classpath.
After the installation, I was left with a folder:
jai-1_1_2_01
which contains the lib folder, and inside lib was:
the three jar files I mentioned eailer the .exe and the two dll files.
I added the three jars to the classpath, but just not sure what to do with the .exe and dll's. If these should be left in the lib folder.
Thanks

Can anyone share how to install Internet Explorer version 7.0 to 10.0 onto a mac

Can anyone share how to install Internet Explorer version 7.0 to 10.0 onto a mac ?? Thank you

Do you want to install IE on a Bootcamp/Windows or OSX? OSX does not have IE anymore. The last IE was v4.0 for native OSX.

When installing maverick mailboxes disappeared, only have current emails. All the folders and content missing. Could anyone be of help. I do have Time Machine for backup.

When installing maverick mailboxes disappeared, only have current emails. All the folders and content missing. Could anyone be of help. I do have Time Machine for backup.

Solved the problem by clicking the gray triangle next to "On My Mac" and drilled down!

HT6114 My Macbook is running very slowly after installating mavericks. Could anyone help?

My Macbook is running very slowly after installating mavericks. Could anyone help?

OS X Mavericks: If your Mac runs slowly?
Spotlight indexing make computer run slowly after a fresh installation of OS X.
http://support.apple.com/kb/PH13895
Startup in Safe Mode
http://support.apple.com/kb/PH14204
Repair Disk
Steps 1 through 7
http://support.apple.com/kb/PH5836
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Increase disk space.
http://support.apple.com/kb/PH13806
Run EtreCheck and remove MacKeeper, CleanMyMac Norton Security, other third party aps,etc
if you have installed those applications.
https://discussions.apple.com/docs/DOC-6173

After installing Mavericks on my MacBook Pro 2009 (japanese keyboard) the layout doesn't work. I mean if I press the @ button the è symbol comes out. I tried to change the layout in Preferences but doesn't work. Could anyone help me please?

Hi there
after installing Mavericks on my macbookpro 2009 (Japanese keyboards) the layout doesn't work anymore. I mean, if I press the "@" button the "è" symbol comes out. I did already change the layout in the Preferences but it didn't work.
Could anyone help me please?

Apple has changed the way Kotoeri keyboard layouts work. You should be able to get normal behavior if you activate the US layout and switch to that just before using Kotoeri. Here is also an Apple note on the topic with another suggestion:
http://support.apple.com/kb/TS5284
Be sure to tell Apple you want this changed back to the way if was in 10.8 and earlier via
http://www.apple.com/feedback
If you know Japanese well, you might ask on the Japanese discussions whether someone has found a better fix for this:
https://discussionsjapan.apple.com

[SOLVED] "Superblock could not be read" error on install

I've been trying desperatly to install Arch Linux on my main computer but this error almost always shows up after 1 or two reboots (usually when I'm finished installing base system and about to install Xorg):
:: Checking Filesystems
/dev/sdc3:
The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternative superblock: e2fsck -b 8193 <device>
I installed Arch by following the install guide and choosing Auto-prepare partitioning where I chose EXT4 as FS for /home and / I believe, so Im guessing the filessytems are set-up properly.
I have no idea why this error keeps coming back reinstall after reinstall (with complete format of HD in each reinstall). First I thought the HD might have gone bad so I tried installing arch to another HD and the error still shows.
Sometimes if I reboot enough times the error doesn't show and sometimes it just doesn't go away, seems like it's kind of random.
The harddisk I am installing to is a 30GB IDE Maxtor harddisk (a couple of years old) and I also tried with a 40GB Seagate IDE harddisk both with no success. When I installed I had 2 other harddisks in my system; a 60GB OCZ agility SSD and a 640GB Wester Digital both on SATA channels, but they are unplugged now.
I'm really lost as what to do here, I love Arch Linux and have used it for some time on my laptop but I never had any kind of problems like this.
Here's output from 'fdisk -l' run from the "maintanence mode" I get into when the error shows "Give root password for maintenance".
I find it weird that Arch tells me the error is on "/dev/sdc3:" when my harddisk is /dev/sda (my other two harddisks are unplugged, but it shows the error both with and without them so I guess it doesnt matter):
fdisk -l
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 104422 83 Linux
/dev/sda2 14 587 4610655 82 Linus swap /Solaris
/dev/sda3 588 1544 7687102+ 83 Linux
/dev/sda4 1545 3738 17623305 83 Linux
Regards,
John
Last edited by johnrl (2010-01-28 14:42:15)

How many hard drives you have installed at the moment?
Atm I have 3 HDs installed; my Arch HD, my OCZ agility and my Western Digital.
Peasantoid wrote:
PirateJonno wrote:To find your UUID look in /dev/disk/by-uuid and use readlink to find the equivalent sdXX.
...or use `blkid`.
Thanks, I used blkid and set-up UUID in /etc/fstab and it seems to be working now.
Can anyone explain how come that the /dev/sdx assignments seems to be randomly distributed among my HDs on each reboot - is this normal? I tried using 'blkid' on a few reboots and noticed that the problem occured everytime the HD arch is installed on was NOT assigned to /dev/sdc, but when it was assigned to /dev/sdc (which was in fstab) it worked fine.
Isn't it weird that Arch seems to assign a different /dev/sdx number to each harddisk on reboots? I mean, if this is normal, why doesn't Arch use UUIDs by default? At first I thought the different /dev/sdx assignments was caused by changing boot order in the BIOS, but the assignments seem to change even when I don't enter the BIOS and just reboot without touching a thing - one reboot it works and one it doesn't (due to differnet /dev/sdx assignment to my Arch hd).
EDIT:
I found the answer to my question on http://wiki.archlinux.org/index.php/Per … ice_naming - Arch randomly assigns device nodes so it seems the UUID fix is the way to avoid unbootable systems.
Is it possible to make Arch use UUIDs in the install so I don't have to configure it manually afterwards? (Why doesn't it use UUIDs by default?)
Thanks for the answers,
John
Last edited by johnrl (2010-01-27 15:20:12)

In Solution Manager, where can I find the SRM 7.0 Configuration Guide?

Please give me directions on how to download the SRM 7.0 configuration guide within Solution Manager, these documents are not available on the service marketplace. We have sol manager 4 I believe, it's not sol manger 7.0.
Also, if you could send me the guide at matt.joseph at thq.com that would save me from losing more time trying to figure out Solution Manger
Thanks for your help.
Matt

Matt,
1. Log on to your SAP Solution Manager system.
2. To be able to access configuration documentation, create a project as follows:
1. Create your project with transaction SOLAR_PROJECT_ADMIN for project administration.
2. Connect your SAP system to SAP Solution Manager with transaction SMSY for the SAP Solution Manager system landscape.
3. Create a project structure and add the required scenarios for your SAP system to your project structure with the Business Blueprint transaction SOLAR01,
4. Add your SAP system configuration structures to your project structure with the configuration transaction SOLAR02.
3. Go to the project structure folder <project name> using transaction SOLAR02.
4. Access configuration documentation for SAP NetWeaver usage types at Configuration StructureSAP NetWeaver 7.0.
5. Access configuration documentation for all areas of SAP SRM at Configuration StructureSAP SRM <release>.
Nesimi

Could anyone provide the complete manual of SAP Query Creation

Hi,
Now I am learning to create SAP Query.
I viewed many questions and answers about SAP Query.
Some mentioned this,and some did that...
Could anyone provide a complete manual of SAP Query Creation for developers.
I can create SAP Queries step by step with it.

http://help.sap.com/saphelp_46c/helpdata/en/35/26b413afab52b9e10000009b38f974/content.htm
http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Introduction.asp
Step-by-step guide for creating ABAP query
http://www.sappoint.com/abap/ab4query.pdf
ABAP query is mostly used by functional consultants.
SAP Query
Purpose
The SAP Query application is used to create lists not already contained in the SAP standard system. It has been designed for users with little or no knowledge of the SAP programming language ABAP. SAP Query offers users a broad range of ways to define reporting programs and create different types of reports such as basic lists, statistics, and ranked lists.
Features
SAP Query's range of functions corresponds to the classical reporting functions available in the system. Requirements in this area such as list, statistic, or ranked list creation can be met using queries.
All the data required by users for their lists can be selected from any SAP table created by the customer.
To define a report, you first have to enter individual texts, such as titles, and select the fields and options which determine the report layout. Then you can edit list display in WYSIWYG mode whenever you want using drag and drop and the other toolbox functions available.
ABAP Query, as far as I Believe, is the use of select statements in the ABAP Programming. This needs a knowledge of Open SQL commands like Select,UPdtae, Modify etc. This has to be done only by someone who has a little bit of ABAP experience.
To sum up, SAP queries are readymade programs given by SAP, which the user can use making slight modification like the slection texts, the tables from which the data is to be retrieved and the format in which the data is to be displayed.ABAP queries become imperative when there is no such SAP query existing and also when there is a lot of customizing involved to use a SAP Query directly
use either SQ02 ans SQ01
or SQVI tr code
for more information please go thru this url:
http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Create_The_Query.asp
http://goldenink.com/abap/sap_query.html
Please check this PDF document (starting page 352) perhaps it will help u.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVQUE/BCSRVQUE.pdf
check the below link will be helpful for u
Tutorial on SQVI
once you create query system generates a report starting with AQZZ/SAPQUERY/ABAGENCY2======= assing this report to tr code for the same
useful
http://www.erpgenie.com/abap/code/abap47.htm
regards,
Prabhu
reward if it is helpful

Hi. Please can anyone show me how to install a flash document / movie into a powerpoint presentation so that the animation plays within the powerpoint? Thanks

Hi. Please can anyone show me how to install a flash document / movie into a powerpoint presentation so that the animation plays within the powerpoint? Thanks

wouldn't it make more sense that a flashtard is someone who
just generally sucks at flash and asks idiotic questions?
anyway, so i pretty much got the banner done - but i'm stuck
on one problem. I made a motion clip of a heart, and i want the
heart to fall from top to bottom, following a squiggly motion
guide, and to rotate 1/4 turn on the way. I got it as far as
following the motion guide, but when i try to select the instance
in the first frame and rotate it, shouldn't the motion tween make
it appear to slowly rotate, rather than stay put then rotate 1/4
turn at the last frame? When I select the clip and play around with
alpha and stuff, that works fine. What the heck?

Could anyone share SRM 5.0 Install Guide. tks!

Similar Messages

Maybe you are looking for