Could CrystalServer 2011 and CrystalReports 2011 exist on the same machine?

Dear all,
I got a pure Windows Server 2008R2 Virtual Machine, and I want to have Crystal Server 2011 & Crystal Reports 2011 on the same machine. I downloaded the trail version of Crystal Server 2011(SP02), and Crystal Reports 2011(SP02). So I tried to install Crystal Reports 2011, and then tried to setup Crystal Server 2011. It pops a runtime error message, and cannot be installed. I tried to remove "Microsoft Visual C++ 2005 redistributable", also did not work. Then I tried from the other hand, I first installed Crystal Server 2011. It was successful. But when I tried to install Crystal Reports 2011, it still pops the runtime error message and could not be installed. Could anyone help me one this?
I tried to download BI Edge 4.0 trial, and it could be installed on the one whcih Crystal Reports 2011 installed.
Could anyone help me?

Hello Dennis,
it's possible to run CrystalServer and CrystalReports on the same machine. Please make sure to use the same Version (SupportPack and Patch Level) of the two applications.
Regarding the runtime error during CrystalReports installation, do you have something more specific like an error message or screenshot?
Best regards,
Thomas Uhde

Similar Messages

How could I play and transmit a stream from the same camera

How could I play and transmit a stream from the same camera?

Hi,
As I said, you can use the method getVisualComponent() of the Processor to get a preview Window.
You create a Processor, prepare it to generate an appropriate output DataSource for what you want to do (saving, TXing, etc).
Then, for this Processor you extract an AWT Component where the stream will be previewed using the method getVisualComponent().
Some of the player examples in the JMF guide use this technique. I'm still not write my own player. I'm using an adaptation of the RTPPlayer, but I'm planning to use the above technique to create a Player where I can apply some effects to the stream and then save it if the user wants to.
If someone already did that, please, correct me if my procedure isn't right!
By the way, thanks for your help! I was using the DataSource returned from Manager.createCloneableDataSource only to create the clones. I was feeding my main Processor with the original DataSource. That was the problem!
RGB

Acrobat 9 (Pro) and Acrobat X(10) in the same machine?

Hi,
Is it possible to install both Acrobat 9 and X (10) in the same machine?
I have 32-bit XP machine as well as Acrobat 9 licensed version installed in it. I would like to know if I install Acrobat X (10)'s Trial version from the internet, what would happen to my licensed version 9?
Thanks in Advance!

Adobe does not support installation of two different copies of Acrobat on the same machine.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Tue, 20 Sep 2011 10:45:29 -0700
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: Acrobat 9 (Pro) and Acrobat X(10) in the same machine?
Acrobat 9 (Pro) and Acrobat X(10) in the same machine?
created by Atit Shah<http://forums.adobe.com/people/at0122> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/3927669#3927669

Can I run 64 bit LabVIEW and 32 bit LabVIEW on the same machine?

If I have a 64 bit OS (Windows 7 64 bit or Server 2008 64 bit) can I install and run 32 and 64 bit LabVIEW on the same machine?
John

LabVIEW 64-Bit vs. 32-Bit Applications FAQ
Q. Can I have both LabVIEW 32-bit and LabVIEW 64-bit installed on the same 64-bit machine?
A. Yes.
The FAQ will likely answer other questions you have regarding the restrictions and issues you will have with having both versions and compiling in one vs the other.

Can I install Web Standard CS4 and Design Standard CS4 on the same machine?

Can I install Web Standard CS4 and Design Standard CS4 on the same machine? My company purchased me a copy of one, and I have a personal copy of the other. Wanted to make sure there wouldn't be any serial number problems in any case...thanks!

Yes, but do a custom install to choose the apps to install to avoid any possibility of conflicts.
Bob

Runing BO 6.5 and Xi 3.0 on the same machine

I have installed 6.5 and Xi 3.0 on the same workstation. Both versions run fine when I run them one at a time (open one, work on it, then exit before starting the other).
However, when I run 6.5 and Xi 3.0 simultaneously, then the next time I try to run either of them, I receive a message asking me to install again.
Has anyone run into this?
Michael O

Hello Constantino,
Is there no way this will work? As I have several customers thinking about or planning an upgrade/migration to XI 3.0, running legacy and new software side-by-side on the same machine is a very important issue, especially as migrations are usually an incremental process, requiring both versions to co-exist for some time.
I have never had any problems running 5.x / 6.x and XI r2 on the same machine, even simultaneous, that's why I'm so surprised at the sudden change.
Any input would be welcome! Thank you!
Kind regards,
Kristof Speeckaert

Iweb 1.1.2 and iWeb 2.0 on the same machine?

Is it possible/safe to run both versions on the same machine? If so how does one do this? If this has already been covered, would someone be so kind as to point me the way?
I cannot trust 2.0 for serious work, but I think that it would be good to have it around in the event that the problems with it are every resolved. But I would like/need to continue to develop a website for a commercial interest and thus need to be working on the previous version.
So, I would appreciate very much if some of you wizards could tell me what is the most effective (and yes safe) way to be able to have both versions running on the same machine -- not at the same time of course.
thanks for your time!

I think I answered one of your posts on this subject in another topic regarding running both versions of iWeb on one computer.
I am doing it but I don't think its very wise unless you are real careful.
I don't publish "serious" websites to .Mac but I do use it for testing sites.
I have two old test sites on .Mac made in iWeb '06 and one made using iWeb '08.
I don't see why they would interfere with each other. They are in separate folders on your iDisk. Publishing to .Mac hasn't caused me any problems but then I really did not care if they got screwed up as I was only testing!
If you are working with more than one website you are better to save the domain.sites2 files in separate folders to make working on them and publishing to a folder easier and to publish each to a server with their own domain names.
The only problems I have had with converting old sites to iWeb '08 is with the page backgrounds and the navigation menu. I just quickly redid the backgrounds and that solved that. I'm not going to bother with the navigation issue because I have decide to rebuild my sites, one by one, in iWeb '08.
The transition from iWeb '06 to '08 was so horrendous for a lot of people that I just want to leave it in the past.
iWeb '08 is working fine for me. Its so easy and fast to use - what's the big deal about rebuilding a website when you get to incorporate the new features!
Message was edited by: Roddy

I want to run an NI GPIB card and a Keithly GPIB in the same machine.

I want to run a NI GPIB and a Keithly in the same machine for software development. Our labs use both types of card. Another employee tried to make it happen, but failed. I would like to use 1 machine due to software licensing issues.

Hi,
There shouldn't be any interaction between the two GPIB drivers. The NI interfaces will use NI-488.2, wil the Keithley interfaces will use their low-level device driver. Each driver will manage the their own hardware.
In LabVIEW, you will use the NI-488.2 Vis to communicate with the NI interface. The Keithley driver has to install their own driver interface VIs.
The only problem is you want to use VISA for both interfaces. I don't know if there is a Keithley implementation of VISA, but there can nly be one installed in the system. The NI_VISA driver will allow you to control the NI interface, but not the Keithley interface. You can still use the Keithley interface using the low-level driver.
Finally, here is a knowledge base I found that has
some information that may be useful to you Using a Keithley PC488 GPIB Interface with LabVIEW
Hope this helps.
DiegoF
National Instruments.

File exists and dosn't exist on the same time ???

Hello there
So here is my Problem:
I want to read a file from disk and for that reason I created a buffered reader, with the reading there is no problem. The problem is the way I access this file. I set the property user.dir to the directory of the file (this is necessery for keeping my application dynamic) (it isn't part of the classpath). Then I give over to the method that reads it the name of the file as a string. There I create a new File object with this code:
File diskFile = new File ( theNameAsString );
(The diskFile is later given to the FileReader..)
Now when I let print out the absolutePath the path is correct. But if I try:
diskFile.exists( );
the result is "false"
So I tried it an other way by instanciating the diskFile as follows:
diskFile = new File ( "fullQualifiedPath" );
The result of printing out the diskFile.getAbsolutePath( ); shows exactly the same as before, but if I try:
diskFile.exists( );
the result is "true"
and this time there is no FileNotFoundException
So what is wrong with the first way I try to access the file?
I hope you all can understand what I try to explain...
Thank you, Alex

I'm thinking you may have a file name problem of some kind. Try this,
File diskFile = new File ( theNameAsString );
String fullName = diskFile.getAbsolutePath();
File anotherLookAtTheSameFile = new File(fullName);
Then try to see if anotherLookAtTheSameFile.exists() is true. I suspect it will not be. If it is, then it is likely that the "user.dir" property is changing between the time you instantiated 'diskFile' and the time you go to actually read the file. If it is, you could use 'anotherLookAtTheSameFile' instead of diskFile.
Hope this helps.

Can Touch Events and Swipe Events exist in the same frame and/or movie?

After having fully tested a file with touch events I decided to add both a touch event and swipe event to a frame.
I started by importing the following statements:
Multitouch.inputMode = MultitouchInputMode.TOUCH_POINT;
Multitouch.inputMode = MultitouchInputMode.GESTURE;
I then added th appropriate code but only touch events worked. I fiddled so more and only the gesture events worked. So before I move any further, I'm wondering if I'm wasting my time trying to get them to work together.
So my questions are:
Can Touch Events and Swipe Events exist together in the same frame?
Can Touch Events and Swipe Events exist scene?
A reference to more information about this would be helpful, if you know of any.

I am aware of the latest releases of the components along with the plug-ins.
This note is applicable to your scenario but you might face some issues related to organization rule wizard, custom user group creation and EAM DB log collection, as mentioned at the bottom of the note. No matter on what SP level you are with GRCFND_A at 10.1, you would face these issues.
And so far, i don't think there is any more update from SAP on co-existence of plugins of 5.3 and 10.1
Ameet

Can sun jdk 1.5 for webstart and sapjvm co-exist on the same server?

We just installed PI 7.1. We would like to install sun jdk 1.5 on the PI 7.1 server so we can use the pi tools on the server, but we are not sure if sapjvm and sun jdk can co-exist, or if it's going to cause any problem with PI 7.1, any setting is needed to tell PI which java to use if multiple version is installed? Does anybody know?
Thanks
Jane Zhou

Kaushal,
Thanks for the reply. note 718901 mentioned to change the jdk version, parameter jstartup/vm/home in instance profile can be used. if that's the case, that should be how we tell PI system whch jdk to use? in PI 7.1, it's point to DIR_SAPJVM, which points to sapjvm_5 in \exe directory. The notes you mentioned all apply to versions before 7.1, I'm wondering if it still works the same way with 7.1 systems.
Has anybody installed a sun jdk on PI 7.1? anything that we need to pay attention to?
Thanks
Jane

Can we have both 9i and 10g db running on the same machine

Hi,
I want to to exp/imp upgrade of my 9i db to 10g db.
Can I have both 10g and 9i installed on the same server?
Thanks,
Kavitha

Yes, provided that the HW, OS version and Patch level are certified for both 9i and 10g.
Install 10g into a seperate ORACLE_HOME -- whether under the same "oracle" account or a different (e.g. "oracle10g" account).
However, you should consider 11g as 10g is being desupported this month (i.e. no new patches / fixes will be available for 10g)
Hemant K Chitale
Edited by: Hemant K Chitale on Jun 9, 2010 10:58 AM

Can you run Logic Pro 8 and Logic Pro X on the same machine?

Hello all!
Congratulations to us on the release of the new Logic Pro!
I am still running Logic Pro 8 (and was waiting for X to come out since I knew it wasn't too far off) but am concerned over the loss of 32-bit plug-ins with Logic Pro X (the wrapping of my old VST plug-ins alone hurts!). I've heard that installing Logic Pro X doesn't in any way gimp Logic Pro 9's usage, but can someone confirm whether or not Logic Pro X and Logic Pro 8 can operate in harmony on the same Mac?
As a bonus, is there any reason to believe that Apple would disable earlier versions of Logic Pro (such as version 8) from running on Mavericks?
I am planning my Logic Pro and Mac OS migrations! Thanks!!

Try here:
https://discussions.apple.com/community/professional_applications/logic_pro
This forum is FCP X.
Al

Can TCS1 and TCS2 co-exist on the same PC?

We are getting ready to upgrade from TCS1 to TCS2. I'd like to keep TCS1 installed until we upgrade all of our projects to TCS2. Is this possible?
Thanks
Dave

Only the FrameMaker component will peaceable co-exist with other versions -
RoboHelp and Acrobat (probably Captivate too) will not.

Can i install final cut 4 and final cut 5 on the same machine ?

hi
i currently use fcp 5.14 on my g5 dual 2.3 (pci-x). i am starting to teach fcp at a college where they use fcp 4.5.
i know that i wont be able to prepare assignments for the students on fcp 5 'cause they wont be able to open them up on 4.5.
the system admin at the college gave me a copy of fcp 4 to install on my machine to sit next to my fcp 5.
my question is, can it be done ?
can 2 different versions of fcp exist on my machine without problems ?
do i need to install fcp 4 on a separate drive so it wont conflict with 5 ?
any thoughts on that ?
thank you very much..,
nir

It can be done with a dual boot setup. I'll not speak to whether it should be done, other than to say it works for us.
The text below was from this thread...
http://discussions.apple.com/thread.jspa?messageID=4417897&#4417897
"Have you considered running a dual boot system?
Might check this thread...
http://discussions.apple.com/thread.jspa?messageID=1255258&#1255258
We had to keep FCHD4.5 for awhile, so I archived 10.3.9, wiped the drive, partitioned it and re-installed 10.3.9 on one and 10.4 on another partition.
Then simply boot from different startup disk, depending on which OS you need to work on."<<
K
Message was edited by: Kevan D. Holdsworth
Message was edited by: Kevan D. Holdsworth

Could CrystalServer 2011 and CrystalReports 2011 exist on the same machine?

Similar Messages

Maybe you are looking for