Could ftp, now can't

For some time I've used Fetch, Cyberduck and Transmit.
I have two non-.mac account that I have been able to ftp to without problems.
Recently if I try to ftp to my Charter account Cyberduck will time out, Fetch and Transmit just indicate that they are attempting to connect.
The other account give me an authentication error.
I have not changed anything.
With the Charter account, per their docs, I used parallels, windows and IE to attempt do do it with the browser. I could not access the page.
I sent the link to my wife and she was successful on her PC with IE.
This really has be baffled.
Charter didn't have a clue, as you might suspect.
Any thought?
thanks

You might want to try a couple of those tests again. I see a few errors. The fact that the first two worked tell me that the network is working correctly.
This test is good:
charlesusher$ telnet ftp.n2thenet.com 21
Trying 12.180.246.2...
Connected to ftp.n2thenet.com.
Escape character is '^]'.
220 www FTP server (Medusa Async V1.21 experimental) ready.
You connected fine. It won't 'prompt' you for a username/password because we're doing this manually. If you want an actual prompt, just do 'ftp ftp.n2thenet.com'.
charlesusher$ telnet ftp.webpages.charter.net.com 21
ftp.webpages.charter.net.com: nodename nor servname provided, or not known
This one looks like you messed up the hostname. I suspect it's ftp.webpages.charter.net and not ftp.webpages.charter.net.com.
I tried telnet webpages.charter.net and got this:
telnet webpages.charter.net
Trying 209.225.8.65...
elnet: connect to address 209.225.8.65: Operation timed out
telnet: Unable to connect to remote host
This one failed because you left the '21' off of the telnet command. You should have typed 'telnet webpages.charter.net 21'. The default for telnet is 23 so their firewall probably threw this away.
Retry these and I bet you'll see they all connect fine.
Make sure none of your FTP clients have any sort of proxy configured.

Similar Messages

I was trying to sync my 120GB iPod Classic earlier and it said it couldn't sync as the iPod disk could not be "read" or "written to". I now can't get anything onto my iPod, and I was wondering if it is a hard drive problem? Any help appreciated. Thanks.

I was trying to sync my 120GB iPod Classic earlier, and it said it couldn't sync as the iPod disk could not be "read" or "written to." I now can't get anything onto my iPod, and I was wondering if it is a hard drive problem? Any help appreciated. Thanks.

Did you go into iTunes to change the location of your media files? if not you will need to go into iTunes and click on preference and select the advance tab then click the iTunes Media folder location. Select the location of your on external hard drive.

I just updated to the latest version of Firefox and now I can no longer download facebook videos with realplayer as I formerly could. How can I downgrade to my previous version of Firefox?

Question
I just updated to the latest version of Firefox and now I can no longer download facebook videos with realplayer as I formerly could. How can I downgrade to my previous version of Firefox?

Many thanks b Noir
This is a copy of ONEof the keys in the registry I changed as told by Apple support today. I also have changed others as instructed by GEAR software support to manually delete GEAR drivers (that I had installed but couldn't delete some of the others they mentioned from Windows system 32. Then some bright spark at work told me I need the Gear drivers so I downloaded the software and installed again.
Sorry, just this minute went to insert image and it is giving me a message saying this sort of content is not allowed?.
The most recent key I altered is in: HKey _local _machine. System\class - 4D36E965-E325-11CEBFC1-08002BE10318. Upper Filter data: Upper filter NTIDrvr SiRem GEARAspiWDN.
The GEARsoftware info about manually deleting GEAR drive is from:
http://www.gearsoftware.com/wiki/index.php?title=DRIVERS:_Windows_-_Updating%2C_ removing%2C_64_bit_versions%2C_etc
I hope you can help

Upgraded to CS5, now can't publish pages.

I upgraded to CS5 from CS3 and am now getting the error "either the network is unavailable or you don't have permission to publish to this location". Any ideas?

I confirmed that my client could ftp to our server from her machine. Basically checked off all the things they suggested doing on their support page. I ended up calling support. I had wanted to do a conference call with my client as they are in a different community than I am but could not get a hold of her. The support person had me check a couple of things on my end ie. ftp using my clients log in credentials and add/modify/delete folders on the server which I was able to. The support person wanted to try ftp’ing to our server but I told them they couldn’t because it’s behind a firewall. Our clients are internal and therefore can access our server with the correct credentials.
Later on the support person contacted my client directly and suggested that she download the trial version of CS5 and install it on a different machine (she had CS3 and upgraded to CS5 on her computer). She tried, much to my disappointment to tell my client that there was an issue with her connecting to our server because she (the support person) could not connect even after I told her she wouldn’t be able to.
So, my client did install the trial version of CS5 on another machine and it worked. I started thinking either there was something messed up on her machine or it was a bad install. Since she had a copy of CS3 I got her to uninstall Contribute, re-install CS3 and the CS5 upgrade and it worked.
Have you tried ftp’ing to your server using the same credentials as what are stored in Contribute using a command prompt or another application like CuteFTP? And you confirmed that you can add/modify/delete folders while ftp’d onto the server? Has your CS5.0 ever worked i.e. did you have it installed on a different machine and it worked? Can you uninstall Contribute 5.0 and download the trial and see if it works?
Sorry! I’m just trying to think of things to get you going. I know it’s frustrating. I’ve definitely been there! The support person I had talked to was actually pretty good. She emailed and called us at our convenience. It’s unfortunate that I was expecting to have experience similar to yours.

I just updated my IPad to iOS 5 and now can not send email. The error message says the server rejects the address which is not true Asti sends on my desktop.

I just updated my iPad to iOS 5 and now can't send email- I have tried the obvious but no luck. Any suggestions?

Usually 'authentication required' means that you need to submit a username (or e-mail address) and password to the e-mail server, when sending a message. This logic is not different between Outlook and Thunderbird, and even with the latest and previous version of Thunderbird.
Of course you can try the previous version again to see if it solves the problem, although you'll be less secure because you would be missing the latest fixes.
If you'd be willing to get back to Thunderbird, say if your frustration level with your new app would increase too much, please see our article [https://support.mozilla.org/en-US/kb/cannot-send-messages cannot send messages] for further help.
In all other cases I'd appreciate it if you could mark this as answer so we know you don't need further help.

I have just agreed to software updates on my imac and now can't open my mail. There is a message saying this version of mail isn't compatible with this latest software. I have located the updated mail in the applications folder but it won't open. Help!

I have just agreed to software updates on my imac and now can't open my mail. There is a message saying this version of mail isn't compatible with this latest software. I have located the updated mail in the applications folder but it won't open. I don't have the original operating software disk. Does anyone have any suggestions?

Your reply suggests that you have moved Mail to a different location, which (as I said) will prevent it from being properly updated. You cannot use Mail 4.5 with any recent version of Mac OS X. Mac OS X 10.7 (Lion) included Mail 5 and Mac OS X 10.8 (Mountain Lion) includes Mail 6. I'm assuming that you have either Lion or Mountain Lion, but if that is incorrect, you will need to provide that information.
At this point, you will need to reinstall your system. Hold down command-R at startup and reinstall the system right on top of the old one. This should not disturb any of your documents or applications, though you should have backups beforehand in case something goes wrong. And at this point, with your system in an uncertain state (I don't entirely know what you have done to it), something could go wrong.
You will also want to delete the old copy of Mail 4.5, wherever that is. You can't use it.
In the future, do not move any of the preinstalled applications. Leave them where they are.

Updated to 10.4.1 on Itunes and now can no longer access the actual Itunes store ...

Now i have a bit more space, i can explain what is really properly wrong. The other day i updated my itunes to the 10.4.1 version and now can no longer access the Itunes store - whenever i try to do so i get the bar at the top gets to about half way then stops and nothing happens - on rare occasions however i am taken into a place that resembles the Itunes store but there is no detail and whenever i click on anything, NOTHING happens.
Now on a SUPER RARE occasion i'll get a notice that the request was timed out?
If ANYBODY can help me i'll be very grateful
Matthew

Purple-Gecko...all that I can say is, "Boom!!!" You are THE man/woman, whichever the case may be.
The "netsh winsock reset" command worked like a charm for my machine (running Windows XP SP3). I have had two weeks of frustration with this issue and finally found your post which got me back online with the iTunes store. My problem accessing the iTunes store began once I downloaded and installed iTunes 10.5 in preparation to upgrade to OS5. Once 10.5 was installed, I could open iTunes and access everything except the store (which prevented any of my devices from being able to sync). I followed all of the suggestions that I could find in Apple Support and the suggestions that I was emailed from Apple's support techs. I unistalled all Apple software and reinstalled iTunes multiple times, and still could not access the store.
Your suggestion is the only "cure" that I have found.
I thank you, my iPod thanks you, and my iPhone 4 thanks you for taking the time to post this fix.

OAM 11g: Deleted IAMSUITEAGENT by accident and now can't login to oamconsole - help!

Hi everyone - I've deleted the IAMSUITEAGENT suite from security realm --> myrealm --> providers within the weblogic OAM admin console (hostname:port/console) and now can't log into the oamconsole (hostname:port/oamconsole). When I enter the username and password into the oamconsole login page, the page just refreshes - is there anything I can do to reinstall it?

"There is a problem with this windows installer package. A program required for this install to complete could not be run. Contact you support personnel or package vendor."
Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

I had to uninstall itunes and now can't reinstall it

I got an iphone 4s and my laptop wouldn't recognise it so after following advice I uninstalled itunes and now can't re-install it.

Yes I get the following message - The installer encountered errors before itunes could be configured. Errors occurred during installation. Your system has not been modified. Please run the installer again, or click finish to exit.
I've tried it a few times and keep getting same message.

Wiped our old iPad 1 clean, now can't install iOS from iTunes. iTunes does not "see" the devise. Tried uninstalling and installing iTunes on laptop. Also bought new USB cable. The iPad is charging, but that's all it does.

Wiped our old iPad 1 clean, now can't install iOS from iTunes using laptop PC (W Vista). iTunes does not "see" the device. Tried uninstalling and installing iTunes on laptop. Also bought new USB cable. The iPad is charging, but that's all it does. Just want to get it operating again for browsing and e-reading.

OK. You merely erased the content and settings. The IOS is still there.
If it has NEVER been jailbroke, here are some standard repair procedures. From what you've already stated, my guess is that you'll end up with Recovery Mode described in the last paragraph.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, read this.

HT201322 Cannot hide my purchases from the pc through. I previuosly could but now i cant has to be some problem

Cannot hide my purchases from the pc through iTunes. I previuosly could but now i cant.

There have been a few posts over the last few days from other people having the same problem - I also can't currently hide or unhide items on my computer's iTunes. I assume that there is a problem at Apple's end.

HT201306 i downloaded an itunes audio book and now can't find it anywhere...where did it go?

I downloaded an itunes audio book and now can't find it anywhere...not in iTunes, not in iBooks...where did it go?

I had similar troubles on my iPhone 5 (iOS 7) with some audiobooks. Tried redownloading, reported problems, etc. nothing worked. Even more confusing, I could 'see' it in the On This IPhone in iTunes, but couldn't even see the audiobooks button in iTunes (on the phone).
I ended up searching for it by name, from my iPhone home screen (by swiping down, it may be called spotlight?), and where it reads 'Search this iPhone', I just started typing the name of the book, and there it was.
Not the most elegant solution, but so far all three of the books that I've bought are there.

I used to be able to but now can't access the iCloud on my iPad...help

I used to be able to but now can't access the iCloud on my iPad...help

Welcome to the Apple Community.
Could you please elaborate a little.

If I purchase Photoshop CC now can I load it to a new computer later? I will be purchasing a new computer Later.

If I purchase Photoshop CC now can I load it to a new computer later? I will be purchasing a new computer later. What's the process of moving product to new computer.

You can install new machines as needed. Your subscription allows for functioning installations on two machines, so you could keep the original installation as a backup if you could use one. Otherwise, you can sign out of the old machine to discontinue the use of it there. You will install on the new machine just like you do for the current one.

Just upgraded and now can not update contacts

I upgraded to the new iPhone software last night and now can not edit contacts. Help!

Hi icsailor,
This sounds like a known issue reported here:
https://bugzilla.mozilla.org/show_bug.cgi?id=713014
There was a workaround posted, but I've not tested it myself. Here are the steps.
# Go into Yahoo Messenger Options - Change the Window in the dropdown to Tab and press OK.
# Then go back and switch it to small window and press OK.
Once the bug is officially resolved, you could try running a Nightly or Aurora build to use the fix early.
Hopefully this helps!

Could ftp, now can't

Similar Messages

Maybe you are looking for