Could I Customize My Clone Drive superficially aka labels and disk icons

I recently ventured into Cloning my HD using CCC, and my setup pretty much looks like this:
http://files.getdropbox.com/u/654524/HD%20Setup.png
Now regarding this I have a query:
In the quest of differentiating my clones, is it ok for me to label them using different colors and disk icons.
My logic says that this is fine, as the naming of the startup and the clone has to be different.
However instead of performing a series of trial and errors, and having no luck finding the topic online, I figured I seek the re-assurance of fellow experts on the field in the forum.

Use different names. Labels also work well. On my machine (iMac), I have three boot volumes: Leo, LeoBU, and LeoTest. The latter two are clones of the first. I also have customized disk icons, available for download all over the net. CCC preserves all three items.

Similar Messages

Can't boot up from bootable clone drive. Why?

My PPC PowerMac G5 computer HD is backed up on an external Lacie bootable drive. The computer recognises the Lacie as a bootable drive but fails to boot up from it. What could be the reason?
The external drive has always functioned properly and continues to function normally - I can access it, and read and write data to it through the Finder. However, if I try booting up from it (via System Preferences -> Startup Disk) it only offers a grey screen. I've tried a number of times. A grey screen with the Apple symbol in the middle - nothing else. One time, instead of the Apple symbol, it featured a circle with a diagonal inside it.
The Lacie is connected via a Firewire 800. Its Partition Scheme is 'Apple Partition Map'. In Info 'Ownership & Permissions', "Ignore ownership on this volume" is checked (not be me) . I've tried booting up with it unchecked too.
Any ideas as to what the problem might be?
Thanks,
iHope

My question was:
The computer recognises the Lacie as a bootable drive but fails to boot up from it. What could be the reason?
Having investigated further I've found the answer: the volume won't boot if the "Ignore Ownership on this Volume" is checked (in the Get Info pane for the volume). If this was checked when creating the clone, unchecking it doesn't help.
This is another example of a problem created by a hidden default. Bad programming, bad attitude. They should be banned! ALL options should be selected by the user so that there is complete transparency.
Apple have just wasted a great deal of my time! I made the clone using the Restore Option of Disk Utility. There was absolutely no mention of this crucially important option. Thank you Apple.
iHope

Admin tool could not load the essbase driver.Please check the configuration

Hi All,
I have obiee11g installed machine and want to connect that machine with essbase.
For that I have installed Essbase Client [11.1.2.1] by downloading the following files,
*1>Oracle Hyperion Enterprise Performance Management System Installer Fusion Edition Release 11.1.2.0.0 for Microsoft Windows (32-bit)*
*2>Hyperion Enterprise Performance Management System Foundation Services Release 11.1.2.0 for Microsoft Windows (32-bit) Part 1 of 4*
*3>Oracle Essbase Clients Release 11.1.2.0.0 for Microsoft Windows (32-bit)*
After that I manually added the ESSBASEPATH and ARBORPATH as Environment Variables (USER).
And also I manually added the essbasepath in bi-init.cmd file.
Finally I tried to connect essbase with BI through BI Admin Tool, I get the following Error
"*Admin tool could not load the essbase driver.Please check the configuration*."
kindly guide me to overcome this issue.
Thanks and Regards
sai
Edited by: 923924 on Apr 24, 2012 5:20 AM

Until you perform the configuration on the AD server, the following message will appear:
Error: Could not start the SSO service. Please check the configuration.
So configure the AD server so that the error message will not appear again.

My hard drive crashed on my MacBook Pro crashed and I need to get my CS5 up and running on the new hard drive. I copied what I could onto an external hard drive but when I drag and drop I get directions to uninstall but the uninstall folder I have does sa

my hard drive crashed on my MacBook Pro crashed and I need to get my CS5 up and running on the new hard drive. I copied what I could onto an external hard drive but when I drag and drop I get directions to uninstall but the uninstall folder I have does says it is an alias that is no longer present. I get error 6. I would like to get my software up and running on the laptop again please

If you subscribed to iTunes match the songs are kept in icloud. If you didn't but you did save the actual iTunes library folder which should include the music, video, etc. you should be able to just drag this file back to your machine in the same place and when you open iTunes it will give you a chance to identify the iTunes library folder.
You can test this to find out if you saved the media files or not and don't need to attach your nano to do it.
You are correct that once you connect the nano it will clear the existing files from it and sync it with the new iTunes library.
If you don't have the media files i'm not sure if/how to get them back on a windows ipod. I have everything backed up regularly because of the horror stories I have seen & heard.

Help - Could not load 'oracle.jdbc.driver.OracleDriver ...

I'm using oci8 to connect to the Oracle database.
URL: jdbc:oracle:oci8:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(PORT=1527)(HOST=testhost)))(CONNECT_DATA=(SID=fnoe2pa)))
When I tried to start the weblogic server, I got the following errors:
Can you suggest what I should do next (step-wise)??? Thanks, Bobby
<Sleeping in createResource()>
####<15/08/2002 14:09:43> <Error> <JDBC> <qawebmethods> <myserver>
<main> <system> <> <001060> <Cannot startup connection pool
"pool/test_myapp" weblogic.common.ResourceException:
Could not load 'oracle.jdbc.driver.OracleDriver
If this is a type-4 JDBC driver, it could occur if the JDBC
driver is not in the system CLASSPATH.
If this is a type-2 JDBC driver, it may also indicate that
the Driver native layers(DBMS client lib or driver DLL)
have not been installed properly on your system
or in your PATH environment variable.
This is most likely caused by one of the following:
1. The native layer SO, SL, or DLL could not be found.
2. The file permissions on the native layer SO, SL, or DLL
have not been set properly.
3. The native layer SO, SL, or DLL exists, but is either
invalid or corrupted.
For more information, read the installation documentation
for your JDBC Driver, available from:
http://e-docs.bea.com
     at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(ConnectionEnvFactory.java:212)
     at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:134)
     at weblogic.common.internal.ResourceAllocator.makeResources(ResourceAllocator.java:705)
     at weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocator.java:282)
     at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.java:650)
     at weblogic.jdbc.common.JDBCService.addDeployment(JDBCService.java:107)
     at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:360)
     at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(DeploymentTarget.java:285)
     at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(DeploymentTarget.java:239)
     at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(DeploymentTarget.java:199)
     at java.lang.reflect.Method.invoke(Native Method)
     at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:636)
     at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:621)
     at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:360)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
     at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
     at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
     at $Proxy31.updateDeployments(Unknown Source)
     at weblogic.management.configuration.ServerMBean_CachingStub.updateDeployments(ServerMBean_CachingStub.java:2977)
     at weblogic.management.mbeans.custom.ApplicationManager.startConfigManager(ApplicationManager.java:372)
     at weblogic.management.mbeans.custom.ApplicationManager.start(ApplicationManager.java:160)
     at java.lang.reflect.Method.invoke(Native Method)
     at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:636)
     at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:621)
     at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:360)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
     at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
     at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
     at $Proxy42.start(Unknown Source)
     at weblogic.management.configuration.ApplicationManagerMBean_CachingStub.start(ApplicationManagerMBean_CachingStub.java:480)
     at weblogic.management.Admin.startApplicationManager(Admin.java:1234)
     at weblogic.management.Admin.finish(Admin.java:644)
     at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:524)
     at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:207)
     at weblogic.Server.main(Server.java:35)
>
####<15/08/2002 14:09:43> <Info> <JDBC> <qawebmethods> <myserver>
<main> <system> <> <001082> <Creating Data Source named
jdbc/test_myapp for pool pool/test_myapp>
####<15/08/2002 14:09:43> <Info> <JDBC> <qawebmethods> <myserver>
<main> <system> <> <001070> <Checking existence of connection pool
pool/test_myapp requested by user system>
####<15/08/2002 14:09:43> <Error> <JDBC> <qawebmethods> <myserver>
<main> <system> <> <001059> <Error during Data Source creation:
weblogic.common.ResourceException: DataSource(jdbc/test_myapp) can't
be created with non-existent Pool (connection or multi)
(pool/test_myapp)>
####<15/08/2002 14:09:50> <Info> <EJB> <qawebmethods> <myserver>
<main> <system> <> <010008> <EJB Deploying file: myapp-ejb.jar>
####<15/08/2002 14:09:50> <Warning> <J2EE> <qawebmethods> <myserver>
<main> <system> <> <160007> <You are running WebLogic Server with J2EE
1.3 features enabled. The implementation of specific J2EE 1.3 features
(EJB 2.0, JSP 1.2, Servlet 2.3, and J2EE Connector Architecture 1.0)
in BEA WebLogic Server 6.1 is of a non-final version of the
appropriate specification. It is subject to change in future releases
once the specification becomes finalized. This may cause application
code developed for BEA WebLogic Server 6.1 that uses the new features
of J2EE 1.3 to be incompatible with the J2EE 1.3 platform supported in
future releases of BEA WebLogic Server.>
####<15/08/2002 14:09:59> <Error> <J2EE> <qawebmethods> <myserver>
<main> <system> <> <160001> <Error deploying application myapp-ejb:
Unable to deploy EJB: Counter from myapp-ejb.jar:
The DataSource with the JNDI name: jdbc/test_myapp could not be
located. Please ensure that the DataSource has been deployed
successfully and that the JNDI name in your EJB Deployment descriptor
is correct.
>
####<15/08/2002 14:09:59> <Info> <HTTP> <qawebmethods> <myserver>
<main> <system> <> <101053> <[HTTP myserver] Loading web app: myapp>
####<15/08/2002 14:09:59> <Info> <HTTP> <qawebmethods> <myserver>
<main> <system> <> <101059> <[myserver] Loading myapp from WAR file:
C:\bea\wlserver6.1\.\config\mydomain\applications\.wlnotdelete\wlap31483\myapp.war>
####<15/08/2002 14:09:59> <Warning> <J2EE> <qawebmethods> <myserver>
<main> <system> <> <160007> <You are running WebLogic Server with J2EE
1.3 features enabled. The implementation of specific J2EE 1.3 features
(EJB 2.0, JSP 1.2, Servlet 2.3, and J2EE Connector Architecture 1.0)
in BEA WebLogic Server 6.1 is of a non-final version of the
appropriate specification. It is subject to change in future releases
once the specification becomes finalized. This may cause application
code developed for BEA WebLogic Server 6.1 that uses the new features
of J2EE 1.3 to be incompatible with the J2EE 1.3 platform supported in
future releases of BEA WebLogic Server.>
####<15/08/2002 14:09:59> <Info> <HTTP> <qawebmethods> <myserver>
<main> <system> <> <101031>
<[WebAppServletContext(1412030,myapp,/myapp)] extracting classfiles to
C:\bea\wlserver6.1\config\mydomain\applications\.wlnotdelete\wlap31483\WEB-INF\_tmp_war_myapp:>
####<15/08/2002 14:10:04> <Info> <HTTP> <qawebmethods> <myserver>
<main> <system> <> <101032>
<[WebAppServletContext(1412030,myapp,/myapp)] extracted classfiles
successfully...>
####<15/08/2002 14:10:04> <Info> <HTTP Session> <qawebmethods>
<myserver> <main> <system> <> <100037> <Creating SessionContext of
type: memory for webapp: /myapp>
####<15/08/2002 14:10:04> <Info> <HTTP> <qawebmethods> <myserver>
<main> <system> <> <101047>
<[WebAppServletContext(1412030,myapp,/myapp)] registering classpath
servlet with initArgs 'null'>
####<15/08/2002 14:10:04> <Info> <HTTP> <qawebmethods> <myserver>
<main> <system> <> <101047>
<[WebAppServletContext(1412030,myapp,/myapp)] registering getior
servlet with initArgs 'null'>
####<15/08/2002 14:10:04> <Info> <HTTP> <qawebmethods> <myserver>
<main> <system> <> <101047>
<[WebAppServletContext(1412030,myapp,/myapp)] registering tunneling
servlets with initArgs 'wl-dispatch-policy=direct'>
####<15/08/2002 14:10:04> <Info> <HTTP> <qawebmethods> <myserver>
<main> <system> <> <101047>
<[WebAppServletContext(1412030,myapp,/myapp)] registering JSPServlet
with initArgs '[JspConfig:
verbose=true,packagePrefix=jsp_servlet,-compiler=javac,compileFlags=,workingDir=C:\bea\wlserver6.1\config\mydomain\applications\.wlnotdelete\wlap31483\WEB-INF\_tmp_war_myapp,pageCheckSeconds=1,superclass=null,keepgenerated=false,precompileContinue=false,compilerSupportsEncoding=true,encoding=null,defaultfilename=index.jsp,compilerclass=null,noTryBlocks=false]'>
####<15/08/2002 14:10:04> <Debug> <HTTP> <qawebmethods> <myserver>
<main> <system> <> <101097> <Registering ServletContext:
"myapp:/myapp">
####<15/08/2002 14:10:04> <Info> <J2EE> <qawebmethods> <myserver>
<main> <system> <> <160003> <Deployed : myapp>
####<15/08/2002 14:10:04> <Info> <HTTP> <qawebmethods> <myserver>
<main> <system> <> <101133> <Initializing WEB server myserver>
####<15/08/2002 14:10:04> <Notice> <Management> <qawebmethods>
<myserver> <main> <system> <> <141052> <Application Poller started for
development server.>
####<15/08/2002 14:10:04> <Notice> <WebLogicServer> <qawebmethods>
<myserver> <ListenThread> <system> <> <000202> <ListenThread listening
on port 7001>
####<15/08/2002 14:10:04> <Info> <NT Performance Pack> <qawebmethods>
<myserver> <ListenThread> <system> <> <000000> <NATIVE: NTSocketMuxer
was built on Nov 1 2001 16:39:28
>
####<15/08/2002 14:10:04> <Notice> <WebLogicServer> <qawebmethods>
<myserver> <SSLListenThread> <system> <> <000202> <SSLListenThread
listening on port 7002>
####<15/08/2002 14:10:05> <Notice> <Management> <qawebmethods>
<myserver> <main> <system> <> <141030> <Starting discovery of Managed
Server... This feature is on by default, you may turn this off by
passing -Dweblogic.management.discover=false>
####<15/08/2002 14:10:05> <Notice> <WebLogicServer> <qawebmethods>
<myserver> <main> <system> <> <000331> <Started WebLogic Admin Server
"myserver" for domain "mydomain" running in Development Mode>
####<15/08/2002 14:10:11> <Info> <NT Performance Pack> <qawebmethods>
<myserver> <ExecuteThread: '14' for queue: 'default'> <> <> <000000>
<Allocating: '2' NT reader threads>
####<15/08/2002 14:10:13> <Info> <HTTP> <qawebmethods> <myserver>
<ExecuteThread: '1' for queue: '__weblogic_admin_html_queue'> <system>
<> <101047> <[WebAppServletContext(5367844,console,/console)] actions:
init>
####<15/08/2002 14:10:18> <Info> <HTTP> <qawebmethods> <myserver>
<ExecuteThread: '1' for queue: '__weblogic_admin_html_queue'> <system>
<> <101047> <[WebAppServletContext(5367844,console,/console)]
FileServlet: init>
####<15/08/2002 14:10:18> <Info> <HTTP> <qawebmethods> <myserver>
<ExecuteThread: '1' for queue: '__weblogic_admin_html_queue'> <system>
<> <101047> <[WebAppServletContext(5367844,console,/console)]
FileServlet: Using standard I/O>

"thorick" <[email protected]> wrote in message news:<[email protected]>...
Most likely, the OCI libraries could not be loaded.
Before continuing down this path, is there any reason
why you want to use an OCI based Driver as opposed to the
all Java Oracle thin driver ?There is indeed a valid reason for my choice.
I am currently connecting to the Oracle "Rdb" 7.0 database (located on
VMS) - not Oracle Oracle.
The SQL Service software we're currently using is version 7.1. This
version works well with the OCI8 driver (when connecting to the
database from Windows NT). This version of SQL Service however does
NOT work for the THIN driver (unless we upgrade the SQL Service to
version 7.1.5.5 - which we're not prepared to do so because it is not
stable enough from our previous test/trials). SQLSRV Version 7.1.5.5
works for THIN driver but it will result in uncommitted
transactions/unresolved connection/stopping of listener issues and
there is a need to restart the service from time to time. Oracle has
since confirmed that this is a bug that they have yet to resolve...
So we have to stick to OCI8 (THICK) for the time being. I would really
appreciate it very much if you can tell me the various OCI libraries
that I need to load (in terms of WebLogic Server config file settings
etc..).
By the way I have already installed the Oracle 8 client software on
the NT server (where WebLogic Server is) and I have also set up the
relevant SID (using the Net8 Assistant) that points to the Oracle Rdb
database on the VMS. I have also tried using SQL*Plus to connect to
the database and I can connect properly to the database. But WebLogic
simply doesn't seem to load the software.
Help...
Regards,
Bobby Brown, writing from Australia.

Connection to the deployment share could not be made (network driver not installed)

Hi guys! i bought the new laptop Dell Latitude E6510 and try to install the enterprise image but i got the error:
"A connection to the deployment share could not be made. The deployment will not proceed. The following networking device did not have a driver installed PCI\VEN_8086&DEV_10EA&SUBSYS_040B1028&REV_05."
I look on internet and i found out that it is the intel network card driver missing. So i get the driver from Dell website and i added this drivers in the MDT console.
Then i have updated the deployment share to rebuild the boot images. Everything went fine but i always get this error.
Am I missing something ?

I too was having the problem...
the single thing that I was forgetting is that while I was recreating & regenerating the images in the deployment workbench. I wasn't burning & booting from a CD...
because (aha) I'm clever & using Windows deployment services to boot across the network & save all that time burning CDs etc.
Doh, I didn't update the WIM that WDS was using...
Open your windows deployment services console,
expand out servers : <server name> : boot images
Right click your boot image (I have 2, one for x86 & one for x64),
choose "replace image" then navigate to your newly regenerated WIM images
(probably C:\deployment_share\boot) & choose the appropriate WIM file.
do this for any images you have, reboot your client machine & BAM, deployment goodness.
MS should really add a module for PXE boot (etc) into the deployment workbench rather than have 2x deployment solutions & use the deployment module from one & the boot module from the other.
Anyhoo, works now, must make a mental note to remember this in future...
Cheers Toolman
Thank you for this. This resolved the issue that I had.

I have an older iMac 5,1 and the disc drive no longer works. I was hoping that I could the Apple USB super drive as a replacement, but the info on the super drive page says compatible with iMac 2012 or later. Does anyone know why it would not work for me?

I have an older iMac 5,1 and the disc drive no longer works. I was hoping that I could the Apple USB super drive as a replacement, but the info on the super drive page says compatible with iMac 2012 or later. Does anyone know why it would not work for me?

A reply to similar question (Q & As , in product page Apple Store) says:
"...dissable the internal reader hardware from devices setup. Then plug the external usb superdrive and that's it." Answered by Enrique T from Lima Oct 25 2013.
If you can locate an external Apple USB 'Air" superdrive for earlier model MacBook Air, that should work. The newer one for the Air is the same as for iMac, now.
You may be able to use other brands of external USB optical drive with your older intel-based iMac, as some of them function capably. A few should also be able to see system discs or other bootable utilities on DVD.
Hopefully this helps.
Good luck & happy computing!

So I formatted a brand new hard drive to MAC OS (Journal), I then could save on the hard drive. Not two days later Im back at square one, the program wont recognize the hard drive again.

So, hard to beleive, but I am having some trouble with Final Cut Pro X.
This last week I formatted a brand new hard drive to MAC OS (Journal),
so that I could save on that hard drive.
Well it went great.
I saved my project on there and copied a few others over as to free up space on my Laptop.
Then, not two days later Im back at square one,
the program wont recognize the hard drive.
It wont even open the events up off my hard drive,
as to jog the program into reqcognizing the scratch disk (which worked twice before).
What happened?
How do I get the program to re-recongize my newly formatted hard drive?
Please help!

The name of the drive, or the name of some folders inside the drive, may fool FCP X into believing it is a camera.
Also, you should not use the drive for time machine backups.

My hard drive failed. My applications were on the drive including Excel, Word, and Powerpoint. Apple told me I could pull everything from the failed drive. I tried that but the drive is bad so I can't get to anything. Do you think Apple will reinstall?

My hard drive failed. My applications were on the drive including Excel, Word, and Powerpoint. Apple told me I could pull everything from the failed drive. I tried that but the drive is bad so I can't get to anything. The Office package was installed/included when I purchased the Mac. Does anyone think Apple will provide me with the Office package? Thank you!

Thank you everyone. I apologize to confusing all but I am up to date and running OS X 10.8.2. It's possible I purchased the key for Office but I don't think so although it was 3-4 years ago. I guess I will stop in the Apple Store and just ask. I may just buy the new bundle anyway to get the most updated.
I have read there are issues with the MS Office bundle running on our latest OS, is that true?
Thank you all!!! You've been great!

Could not reconnect all network drives

I have several drives mapped on different Windows 7 boxes in my office. Just about every time I boot up one of these systems I receive the message "Could not reconnect all network drives" in the system tray.
I should note that merely clicking the drive inside Windows Explorer will restore the connection. I store the server logon credentials in Control Panel / Credential Manager then just map the network paths to drive letters. I'm pretty sure the
problem doesn't stem from any credentials type of problem though, because I have the exact same situation when connecting to only open shares. I have noticed that a couple applications will restore the connection themselves when trying to access information
on a share. Most applications however will give an error and time out trying to access the shares unless I go and manually click each drive letter in Explorer. For instance if I place Firefox bookmarks on a share and open Firefox, Firefox will
display no bookmarks until I click the drive in Explorer and reopen Firefox.
One thing I can do to fix the problem is hard code my IP address. I never receive the message if a computer has fixed IP address. My router hands out IPs on the LAN dynamically, so I switch it to another router and tried a using a Linux based dhcp-server
as well. Neither fixed the problem.
I'm a long time user of batch files and realize I could place use one as a band aid for this issue, but I don't want to go that route.

Hello marstech,
According to the research, the mapped drive lost issue may be caused by the several possible reasons:
Possible reason1. The problematic client doesn't reconnect to the target share at logon.
Please follow the steps to re-configure the mapped driver on the client and then check if the issue will re-occur.
Steps:
a. Open "My Computer"
b. Click on "Tools" and then select "Map Network Driver"
c. input the \\ipaddressofserver\sharename to give the path of the share
d. Check "Reconnect at logon"
e. Drive gets mapped
f. Double click on the drive to check.
Possible Reason 2. Antivirus software or Windows Firewall may block the SMB protocol on clients.
Please check if there is any Antivirus software and the Windows Firewall is enabled on the problematic client. If so, please disable them to check if the issue can be resolved.
Possible Reason3. Fast Logon Optimization is enabled on the clients.
The fast logon feature may affect the display and drive letter assignment of a mapped network drive. As a result, the drive may have been mapped; however, the user on client cannot see it in Windows Explorer. He may recognize it as a failed network drive mapping.
This is the reason why we usually suggest you to disable fast logon on the clients via a GPO, and please check if the mapped network drive will be occur under this circumstance.
Please also configure the following group policy setting to disable Fast Logon Optimization to see if the issue still exists on the problematic clients.
Computer Configuration\Administrative Templates\System\Logon\Always wait for the network at computer startup and logon
When this policy is enabled, a Windows XP client behaves in the same manner as a Windows 2000 client at both system startup and at user logon.
Please note: As this is a computer configuration, please run "Gpupdate /force" and then reboot the problematic clients to make it take into effect.
For more information about Fast Logon Optimization feature, please check the following KB article.
305293 Description of the Windows XP Professional Fast Logon Optimization feature
http://support.microsoft.com/?id=305293
831998 Mapped network drive shows no drive letter or will not allow you to create new long-named files or folders
http://support.microsoft.com/kb/831998
297684 Mapped Drive Connection to Network Share May Be Lost
http://support.microsoft.com/kb/297684
If the issue still exists on the problematic clients, please also try adding the following registry subkey on the problematic client to check it works.
Steps:
a. Click Start, click Run, type REGEDIT, and then click OK.
b. Locate and click the following registry subkey:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\NetCache
c. Click Edit, point to New, and then click DWORD Value.
d. Type SilentForcedAutoReconnect , and then press ENTER to name the value.
e. Double-click SilentForcedAutoReconnect .
f. In the Value data box, type 1, and then click OK.
Please feel free to let me know if you have any concen.
Hope the information can be helpful for you.
Thanks and Regards
Scorpio_Milo
MCTS: Windows Vista | Exchange Server 2007
MCITP: Enterprise Support Technician
MCITP: Server & Enterprise Administrator
Microsoft Infrastructure Consultant
Enterprise Service: Solution Architect
Microsoft Storage Team - File Cabinet Blog
My Blog

Could not use the clone stamp tool because the area to clone has not been defined

Freshly installed Elements 10. Can not use the option-mouse click to define an area for the clone stamp. The error I get is:
Could not use the clone stamp tool because the area to clone has not been defined (option-click to define a source point).
New Mac Mini. Had the same problems in Elements 9 so I installed the 10 trial. Is this a key binding error? Did not have this issue with Elements 9 on my Mac Air or my Windows 7 system.
I'm not a newbie and know how to use the clone tool. I won't say I'm an expert so if it's something related to layers please throw out some ideas.

This problem came back up. I hadn't used PSE since last November and was frustrated to run into it again. I don't think it's a layers issue afterall.
I use a wireless keyboard and mouse on Mini and mouse on Air, although keyboard for Air is upstairs at a desk with monitor for occasional use. Regardless blue tooth is on for these devices. Problem exists. Turn bluetooth off on Air and the problem is gone. It must be related to option key when bluetooth is on, I guess some different mapping. Even when I have bluetooth on and try to use Option key on the Air keyboard it does not work.
So now where do I look for configs to check?

"Could not use the clone stamp because the area to clone has not been defined (Alt-click to define a source point)".

Few users access our Photoshop through Citrix on a mac but use a Windows 7 platform once they're in Citrix. They're all having issues using the Clone Stamp tool. Get the error "Could not use the clone stamp because the area to clone has not been defined (Alt-click to define a source point)". We've reset the clone stamp tool, reset all the tools, and reset the preferences. We've made sure that we're in All Layers. Nothing seems to be working. None of the other forums helped either. Adobe support is no help either.
Thanks,
Moe.

Did you check with Citrix support? Did you try both of the Alt keys.

Could not use the clone stamp tool because the area to clone has not been defined (option-click to d

Could not use the clone stamp tool because the area to clone has not been defined (option-click to define a source point). this is what shows up in the command box when ever I click to start to pick the spot i want to use as the clone. makes my cloning tool useless. can any one help? I have reset the tools restrted my computer. i am at a loss...

Are you working with more than one layer? If you are working with multiple layers it makes a difference when selecting source spot and then trying to clone to a different layer. I find that I have to be sure I am selecting the corresponding layers for source and then for application when working within multiple layers.
At least for me this is the case when getting that type of message. I am very new to this program though, so maybe someone else has a more concise answer for you.
Good luck and write again if this doesn't help.
Moon52
Sent from my iPhone

A prompt that says "Could not use the clone stamp because the are to clone has not been defined (option-click to define a source point), appears EVERY time I try to use the clone stamp. What is wrong and how can I fix this

A prompt that says "Could not use the clone stamp because the are to clone has not been defined (option-click to define a source point), appears EVERY time I try to use the clone stamp. What is wrong and how can I fix this?

If a tool is acting up, one suggestion is to reset the tool.
Ctrl-click on the clone tool icon in the Options bar and select Reset Tool.

Could not find Microsoft JDBC Driver ???

Hi all,
My program could not find the JDBC driver. Why?????
Here is my environment:
Platform: Win2000
Database: Sql2000
Tool: JBuilder enterprise (trial version)
JDBC Driver: Microsoft JDBC driver for SQL Server 2000
I set the CLASSPATH=.;D:\Sql200JDBCDriver\lib\msbase.jar;D:\Sql200JDBCDriver\lib\msutil.jar;D:\Sql200JDBCDriver\lib\mssqlserver.jar
Here is my javabean:
package test;
import java.sql.*;
import java.io.*;
public class LoginBean{
public static boolean login(String strUser, String strPass) {
ResultSet rs;
try{
System.out.println("before class.forName");//Print trapped error.
Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver");
System.out.println("After class.forName");//Print trapped error.
java.sql.Connection theConnection = DriverManager.getConnection("jdbc:microsoft:sqlserver://localhost:8080;DataBaseName ='MyDataBase;User=sa;passowrd="); //Connect to db
System.out.println("After get connection");//Print trapped error.
Statement theStatement=theConnection.createStatement();
rs=theStatement.executeQuery("SELECT username, password FROM login WHERE username= '" + strUser + "' AND password= '" + strPass + "'");
if(rs.next()) //Fetch username of record
return true;
}catch(Exception e){
System.out.println("before e.getMessage error");//Print trapped error.
System.out.println(e.getMessage());//Print trapped error.
System.out.println("after e.getMessage error");//Print trapped error.
} return false;
Here are the messages I got:
before class.forName
before e.getMessage error
com.microsoft.jdbc.sqlserver.SQLServerDriver
after e.getMessage error.
The program never got throught the statement: Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver");
What's wrong?????
thanks in advanced.

I guess you have a good idea what the problem is. Either the class name you have specified is wrong or the required library is not on the classpath.
How are you setting the classpath? Are you running your application through JBuilder or through the command line?
If it's through JBuilder then make sure that you've configured one of their tiresome "Libraries" and that your project has it in its "Required Libraries".
Never rely on environment variables to supply the classpath - it takes very little effort to set up a classpath for each application you're developing and will ensure you're using the versions of each library that you want to. Personally I make sure I delete the classpath environment variable so there's nothing implicit hiding away.
Hope this helps.

Could I Customize My Clone Drive superficially aka labels and disk icons

Similar Messages

Maybe you are looking for