Could I install CCM 3.x to VM server, than upgrade it to CCM4.x?

We have some very old servers which installed CCM4.x many years ago. Because these servers are so old now, we want have some VMs to backup them. Could I install CCM3.x to VM servers, than upgrade it to CCM4.x? Are there any license problems here ?
Thanks a lot for this crazy question!
Sam

Hi Jiande,
You can do so but they will not be TAC supported. Additionally, CUCM 3.x and 4.x are already end of support and if you need TAC assistance in upgrading from a cucm 4.x built on VMWare to a Linux based version then it will not be supported either. There is no concept of licensing in 3.x and 4.x versions. When you upgrade to a linux version using Data Migration Assistant ( DMA ) a license file is generated that allows the licensing team to publish the requisite licenses for you on the linux version.
HTH
Manish

Similar Messages

LSH error on installation server: Could not install DS as a service

Hi
we set up an installation server some time ago. In the past all users had administrative privileges therefore no LSH was necessary. Currently we are upgrading from Windows XP to Windows 7 and the users won't be admins anymore. That's why LSH is necessary now.
I tried to set the LSH up, but when I confirmed the DS und IS data in the LSH configuration, the following error appeared:
Could not install DS as a service
The server provides SAP GUI 7.20 PL 8
The installer version is 8.6.1.72 (latest!?) and reffering to note 1587566 didn't result in any solution. A similar problem is mentioned in thread LSH on installation-server fails with "Could not start DS as a service" but it doesn't help me either.
Did anyone figure out similar problems with LSH or knows a workaround/fix?
Kind regards
Jann

I looked into the logs and found the following:
14:00:38 NwSapsAtlC 1   Admin's choice: 'Configure DS'
14:00:38 NwSapSetUI 1
14:00:38 NwSapSetUI 1   UI: Show welcome page
14:00:40 NwSapSetUI 1
14:00:40 NwSapSetUI 1   UI: Show user credentials page
14:00:40 NwSapSetUI 1
14:00:40 NwSapSetUI 1   UI: Show user credentials page
14:00:41 NwSapFeiUt 1E Security: failed to allow to replace process-level token
14:00:41 NwSapFeiUt 1   SERVICE Dep: RPCSS
14:00:41 NwSapFeiUt 1E Failed in call to CreateService in Create Error message: Der Kontoname ist unzulässig oder nicht vorhanden, oder das Kennwort ist für den angegebenen Kontennamen ungültig. Error code 0x00000421 (1057).
14:00:41 NwSapFeiUt 1E Failed in service creation
14:00:41 NwSapAdmin 1E ERROR: Could not install DS as a service.
14:00:41 NwSapSetUI 1
14:00:41 NwSapSetUI 1   UI: Will show finish page now...
14:08:16 NwSapsAtlC 1   Opening XML document 'C:InstServerSetup..SetupServerRecord.xml' (MS XML 3.0 SAX)
14:08:17 NwSapAdmin 1   Engine holds 3 registered event handlers
The password and user is definitly correct!

Installing CCM 5.0(4)

When iam installing CCM 5.0(4) on a MCS 7815, after providing all the information like(IPs, timezones, selecting it as a publisher, NTP, DNS)installation process keeps on restarting the server and starting from the begining of the installation. What could be the resons??

5.1 I believe will have a windows environment. I could be wrong.

Everytime firefox updates I loose my Blue Mountain access. the pop-up reads Create & print plug-in could not install because it is not compatable with firefox 4.0.1

went to use create & print in bluemountain got "In order to use create & print in Mozilla you must download and install latest version. Do you want to install plug-in?" (clicked OK). Next message was "Firefox prevented this site (www.bluemountain.com) from asking you to install software on your computer" (clicked Allow) Next message "Create & Pring plugin could not install because it is not compatible with firefox 4.0.1" -- this sound like a firefox problem not bluemountain. Please help... I am paying to use bluemountain and firefox is not letting me get my $$$$ worth out of that site.

Launch Disk Utility in /Utilities. Then, click on the volumes under the top-level disk. The one that has this listed on the bottom is the boot volume.

"The installation was interrupted before iTunes could be installed"

For several months now I have tried unsuccessfully to install iTunes on my laptop computer. The older versions worked, with several bugs, but they worked nonetheless. After installing EITHER iTunes or QuickTime, I get the messages:
"The installation was interrupted before iTunes could be installed" or "The installation was interrupted before QuickTime could be installed". The result is that NOTHING has been installed on my harddrive. I have read over many previous tech support posts on this forum and have tried many of the proposed solutions to other peoples' problems.
This isn't necessarily an error message because it doesn't 'popup' after installation, but rather is on the iTunes+QuickTime screen that begins by saying "the iTunes for Windows installer has completed". Immediately underneath is where I get "The installation was interrupted before iTunes could be installed". Followed by "the system has not been modified. To install this program at a later time, run the installation again." (no ****?). My only option at this point is to click "Finish", which takes me back to the desktop with no sign of iTunes or anything.

Just noticed the post below mine solved this problem. Now additional problems have arisen...

SCCM 2012 R2 Install - SMS_NOTIFICATION_SERVER install fail - bgbisapi.msi could not install

Installed SCCM 2012 R2 Primary Site on the D: drive on a Windows 2012 R2 server. The install went as expected but when I open the Component Status, there are a number of Error messages which pertain to the failed installation of the SMS_NOTIFICATION_SERVER:
"Site Component Manager failed to install this component, because the Microsoft Installer File for this component (bgbisapi.msi) could not install."
Here is the error from BgbSetup.log:
<01/16/15 14:53:55> Installing the SMSBGB
<01/16/15 14:53:55> Passed OS version check.
<01/16/15 14:53:55> IIS Service is installed.
<01/16/15 14:53:55> SMSBGB already installed (Product Code: {A78E8003-2307-4B70-B7CD-1A07C0A31D21}). Upgrading/Reinstalling SMSBGB
<01/16/15 14:53:55> New SMSBGB is the same product code. This is a minor upgrade.
<01/16/15 14:53:55> Enabling MSI logging. bgbisapi.msi will log to D:\Program Files\Microsoft Configuration Manager\logs\bgbisapiMSI.log
<01/16/15 14:53:55> Installing D:\Program Files\Microsoft Configuration Manager\bin\x64\bgbisapi.msi REINSTALL=ALL REINSTALLMODE=vmaus CCMINSTALLDIR="D:\Program Files\SMS_CCM" CCMSERVERDATAROOT="D:\Program Files\Microsoft Configuration
Manager" USESMSPORTS=TRUE SMSPORTS=80 USESMSSSLPORTS=TRUE SMSSSLPORTS=443 USESMSSSL=TRUE SMSSSLSTATE=0 CCMENABLELOGGING=TRUE CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1
<01/16/15 14:54:04> bgbisapi.msi exited with return code: 0
<01/16/15 14:54:04> Installation was successful.
<01/16/15 14:54:04> CTool::RegisterComPlusService: run command line: "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\RegSvcs.exe" /u "D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll"
<01/16/15 14:54:08> CTool::RegisterComPlusService: Failed to unregister D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll with .Net Fx 4.0
<01/16/15 14:54:08> CTool::RegisterComPlusService: run command line: "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\RegSvcs.exe" /extlb /tlb:"D:\Program Files\SMS_CCM\microsoft.configurationmanager.bgbserverchannel.tlb" "D:\Program
Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll"
<01/16/15 14:54:12> CTool::RegisterComPlusService: Failed to register D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll with .Net Fx 4.0
<01/16/15 14:54:12> Cannot register BGB server channel DLL D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll. Installation cannot continue.
<01/16/15 14:54:12> Fatal MSI Error - bgbisapi.msi could not be installed.
<01/16/15 14:54:12> ~RoleSetup().
<01/16/15 14:54:21> ====================================================================
From what I've read online this problem seems to be born of installing SCCm on the D: drive which throws dotNET. A few people seem to have had some luck with editing two of the dotNET files (regsvcs.exe.config and InstallUtil.exe.config) to include
the following lines:
    <runtime>
        <loadfromRemoteSources enabled="true"/>
    </runtime>
In pursuit of a fix, I took backups of both files and then made the change to regsvc.exe.config but I was unable to do the same with Installutil.exe.config (opening the file in Admin Notepad would only let me Save As...).
Can anyone suggest what the problem could be? Am I barking up the wrong tree with the config file editing? Any info/advice would be much appreciated.
Thanks!

Hi,
You could try to copy Installutil.exe.config and edit the copy-file. Then copy the edited file to replace the old file.
Reference:ConfigMgr 2012 R2 – Notification Server Install Errors
Note: Microsoft provides third-party contact information
to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Best Regards,
Joyce

Every time I launch Firefox it pops up an error stating "Firefox could not install this item because "install.rdf" (provided by the item) is not well-formed or does not exist. Please contact the author about this problem."

Firefox could not install this item because "install.rdf" (provided by the item) is not well-formed or does not exist. Please contact the author about this problem.
The statement above is in the pop up error box every time, when I launch Firefox. If I click ok in the box Firefox then opens. How do I fix this initializing/launch problem?

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).<br />
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.<br />
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.<br />
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")<br />

I have a seagate external hard drive with files copied from windows pc. If I will download NTFS driver from seagate to my mac, could I install it safely without harming my files in the external hard drive? I am afraid I may erase all files in there.

I have a seagate external hard drive with files transferred from my windows pc. If I will download NTFS Driver from seagate to my mac, could I install it safely without harming my files? I am afraid.. I might erase all my important files during the installation..

Thanks a lot! I have already downloaded Paragon Driver and it works well with seagate external hard drive. I am copying as of now my important files from my mac to it. However, I have only the trial version which will expire in 10 days. I don't have credit card to buy for it.

Could i install a hdmi or video card on a hp 600 all in one mine did not come with one ?

My hp touchsmart 600 all in one did not come with a hdmi or rca port only coax port.
Could i install one or how could i play my xbox on it? it has a delay that dont let you play the game. help

Hello @kingdavid1977,
I understand that you are looking for a graphics card for your computer. Although I cannot recommend a specific card for you I can tell you this. According to the HP TouchSmart 600-1350 Desktop PC Product Specifications you have an open Mobile PCI Express Module (MXM 3.0) socket available on your computer and as long as you install a card that meets that slot you should be able to get your game console to connect.
I hope this helps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Mac OS 10.4.11: Adobe Reader could not install properly

Suddenly could not open pdf docs, uninstalled & reinstalled v9.0.0, cannot open application, get "Installing/fixing installation" then immediately get "Adobe Reader could not install correctly. Adobe Reader was unable to install a necessary component and must quit. pdf icons changed but docs open. What's happening here?

Sorry, Firefox 4 needs OS 10.5 or 10.6:
http://www.mozilla.com/en-US/firefox/4.0/system-requirements/

Without cd rom or hard disk could be install sql 8i or 9i

Hi Guys,
Please let me know that without cd rom or hard disk could be install sql 8i or 9i, we have no available any accessories only through the folder of sql 8i can be installed.

1002966 wrote:
Hi Guys,
Please let me know that without cd rom or hard disk could be install sql 8i or 9i, we have no available any accessories only through the folder of sql 8i can be installed.USB Stick (a.k.a. Thumb Drive)?

Trying to install the new itunes update and it keeps saying error could not install itunes. Currently I am running windows 7. Any advise to fix this problem.

Trying to install the new itunes update and it keeps saying error could not install itunes. Currently I am running windows 7. Any advise to fix this problem. This is doing this when installing itunes/quicktime, safari 5, mobileme control panel, and the software update itself. The itunes version is 10.3.1

That suggests that the installer is getting damaged during the download.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

Installing CCMS on a new system. System entry not found in RZ20CEN aftr reg

Hi Guys,
I am trying to install CCMS for our systems. I have made all the configurations as per the "Monitoring Setup Guide
(CEN SAP Net Weaver7.0 SPS 13)" document and refered all the help.sap.com doc's for configuring ccms.
I have registered the system with the CEN and I see the entry for my system in CEN in RZ21. but in RZ20 on CEN I donot see the entry for my system.
Do I need to add this manually in RZ20? Or did I miss something. If some one has come accross this plz help.
Thanks
Manmath

Hi Kunal,
That was very helpful. I awarded you the points.
I had just done that when I received your reply.I refered to to the thread
CCMS CEN Configuration for SAP 4.6C version
Now, I have added the system to the new monitor set.
I want to use the templates provided by SAP to set up the alerts (monitor).
There are templates like
SAP CCMS Monitor Templates
SAP CCMS Monitors for Optional Components
SAP CCMS Technical Expert Monitors
SAP CCMS Technical Operations Templates
How can I use the template SAP CCMS Monitor Templates ?
Thanks
Manmath

OS X could not install on this disk. Not enough disk space

Hi,
Disclamer here is that I am completely new to the Mac world after having used purely Windows for the last 15 odd years so sory for any silly mistakes
I tried to do an upgrade on my Mac Book Air but am running into a really annoying issue am hoped that someone would be able to give me some much needed help.
I downloaded Mavericks from the app store with no issues. I then tried to do the upgrade and I get to the OS X installer screen, were I chose my language then hit next. I then select the harddrive to install on press install. I then get to the Installing X screen and status says Installing OXS on the disk "Macintosh HD"
After a few seconds I get a message saying "OS X could not install on this disk. There is not enough space on this disk to install the selected items. Deselect at least 1.16 GB and try again"
I appreciate that I need to delete some files but how can I get get to the files in order to delete them as, as soon as I resart the PC I get caught in the same loop
Manu thanks for taking the time to look at this and for your help

If you cannot get into your Mac at all, if you MacBook Air is still under AppleCare, you can purchase an external hard drive to connect up to your MacBook Air (MBA), bring both the drive and your Mac in an Appe Store or Apple Auhtorized reseller/repair center so Apple techs can install a bootable copy of OS X 10.9 Mavericks onto the external drive where you can boot to that drive from your MBA and access your MBA's internal hard drive and start cleaning off and archiving data.
You should never, EVER let a conputer hard drive get completely full, EVER!
With Macs and OS X, you shouldn't let the hard drive get below 15 GBs or less of free data space.
If it does, it's time for some hard drive housecleaning.
Follow some of my tips for cleaning out, deleting and archiving data from your Mac's internal hard drive.
Have you emptied your iMac's Trash icon in the Dock?
If you use iPhoto, iPhoto has its own trash that needs to be emptied, also.
If you store images in other locations other than iPhoto, then you will have to weed through these to determine what to archive and what to delete.
If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
Delete any old or no longer needed emails and/or archive to disc, flash drives or external hard drive, older emails you want to save.
Delete any other mail in your Junk folders. Also, look through your Sent Mail to see if there is anything that can be deleted.
Other things you can do to gain space.
Once you have around 15 GBs regained, do a search, download and install OmniDisk Sweeper.
This app will help you locate files that you can move/archive and/or delete from your system.
STAY AWAY FROM DELETING ANY FILES FROM OS X SYSTEM FOLDER!
Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
Again, archive to disc, flash drives, ext. hard drives or delete any old documents you no longer use or immediately need.
Look in your Applications folder, if you have applications you haven't used in a long time, if the app doesn't have a dedicated uninstaller, then you can simply drag it into the OS X Trash icon. IF the application has an uninstaller app, then use it to completely delete the app from your Mac.
Download an app called OnyX for your version of OS X.
When you install and launch it, let it do its initial automatic tests, then go to the cleaning and maintenance tabs and run the maintenance tabs that let OnyX clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
Typically, iTunes and iPhoto libraries are the biggest users of HD space.
move these files/data off of your internal drive to the external hard drive and deleted off of the internal hard drive.
If you have any other large folders of personal data or projects, these should be archived or moved, also, to the optical discs, flash drives or external hard drive and then either archived to disc and/or deleted off your internal hard drive.
Good Luck!

"Installer could not install some files in "/". Contact the software manufacturer for assistance."

What does THAT mean!!! Appears when trying to download the new Itunes!!!
Any ideas??
"Installer could not install some files in "/". Contact the software manufacturer for assistance." ?????????????????????

can someone please help!!! I can't install anything on my mac!!! And my iphone isnt even showing up in itunes when i plug it in!

Could I install CCM 3.x to VM server, than upgrade it to CCM4.x?

Similar Messages

Maybe you are looking for