Could i show the dashed-line of Tree Control in Flex 1.5

For example, there is dashed-lines between folder and folder
in the Windows Explorer.I wonder whether i can set a property to
let the tree control show its dashed-line.
Thanks in advance.

hi all
Please have a look and tell me why I am getting this error.
Thanx
kvijai

Similar Messages

Can I change the dashed line between pages in 2up Display mode?

Did anyone ever figure out an answer to this query: Remove dashed page lines in two up mode?
Or did it get fixed or modifiable in a later version?
I'm viewing a pdf in two-up mode and I hate the dashed line Acrobat uses to indicate the gutter line between pages.
I don't want to export as spreads from the indd doc because it ruins pagination.
I wouldn't mind changing it to a solid hairline. the dashes are really distracting.
I don't like Showing Gaps between pages either.
Anyone have a way to modify that dividing line in regular two-up mode?
Thanks.

Is there a way to change this?
No.

SAPScript: why the window only show the LAST line

Dears,
In my form, one of the window only show the LAST line of the it.
I have set the window enough space, also when debuging the program , open_form, write_form,
all of those sy-subrc = 0.
both static texts and dynamic texts are set in the window, but only the last line shown.
Anyone could help me?
Thanks a lot.
Sincerely,
Julie Lv

Hi,
There are several possibilities to resolve your problem.
You can work with 2 main windows on in1 page.
With NEW-WINDOW you switch to the next main-window
How to use it.
make an item in main window with that /: NEW-WINDOW command
if you are ready with first loop call a WRITE_FORM with that NEW-WINDOW statement.
to cojntinue in the other main.
Other possibility is. (in case there are not ot many lines)
Use for every line other variable names.
Fill these in the loop. And after loop WRITE FORM
eg. (if maximum is 3 lines)
&VAR1_1& &VAR1_2& &VAR1_3& &VAR1_4&
&VAR2_1& &VAR2_2& &VAR2_3& &VAR2_4&
&VAR3_1& &VAR3_2& &VAR3_3& &VAR3_4&
Hope this helps.
Gr., Frank

Dont want to show the divided line between two rows in a Grid.

Hello Friends,
I want a Grid in which I want multiple rows but i dont want to show the divided line between two rows.
It is just like a grid on Territories form(Administrator->SetUp->General->Territories)
Thanks.

Mithun,
The component you're talking about is not a grid, and that component is not exposed by the UI API so you cannot use it.
Regards,
Vítor Vieira

What are the dashed line in air port express and air port extrem

what are the dashed line in air port express and air port Extrem

The dashed line represents a wireless connection between the base stations.

HT201335 When i try to mirror it shows the blue line at the top then turns back to black

When itry to mirror it wouldn't show on tv but it would show the blue line at the top the. It would go back to black

First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
If that doesn't fix the problem Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

VSAN link to DR shows as dashed line in Fabric Manager

We have a 9509 at our HQ site and a 9216 at our DR site.
We have a single VSAN configured from HQ to Dr that accries all of the replication traffic to DR.
We recenlty had a situation where the fcip link to DR was down with:
"2007 Aug 21 06:46:10 lkld-9509-01 %PORT-5-IF_DOWN_TCP_MAX_RETRANSMIT: %$VSAN 50%
$ Interface fcip1 is down(TCP conn. closed - retransmit failure)"
The link has been up fro a week now, but it is showing as a dashed line in Fabric Manager. The connection shows "Up" and all traffic is making it to the VSAN at the DR site.
Before, I could see the link as a solid yellow line when I would look in Fabric Manager.
Anyone have any thoughts on this?

Thanks,
Everything seems to be stable now, but is it possible there could be an issue with a port configuration?
I have been here for almost 5 months and it happend one time for those hours I mentioned, nothing since.
I have head that this has happened before.
I have heard that these could be an issue:
Buffer credits - not sure what to do there
Interface not configured for the 45Mbps DS3 link we have.
It seems if those were issues, we would see this more often that once every few months.
Anything I can look for?

HT4910 I have 2 lines and on 1 of the main phone I went to settings then storage & backup automatically it showed how much space i have which was not allot and it also showed the other line storage space. I click on manage storage and it used to show both

I was told that I have 14.9 gb of space on my phone when my total is 15gb. I was adviced to free storage and to click on settings and manage my storage by either purchase more or turning off or deleting some of the back ups. When I went in to settings then to icloud it usually would of showed me both phone storage memory and when I started going down my list and turning off some of the apps from back ups of certain app all of a sudden I couldnt no longer see my phone storage memory or my account name for that matter. Now I only see the other line username and storage space that the other phone has.
What can I do? I used to see the list of all the apps I have on icloud and now its empty and it tells me I have available 13.4 gb available.
Please advice. Thank you
Patricia

I cannot find this 300GB "Backup" in the Finder, only in the Storage info when I check "About This Mac".
You are probably using Time Machine to backup your MacBook Pro, right? Then the additional 300 GB could be local Time Machine snapshots. Time Machine will write the hourly backups to the free space on your hard disk, if the backup drive is temporarily not connected. You do not see these local backups in the Finder, and MacOS will delete them, when you make a regular backup to Time Machine, or when you need the space for other data.
See Pondini's page for more explanation: What are Local Snapshots? http://pondini.org/TM/FAQ.html
I have restarted my computer, but the information remains the same. How do I reclaim the use of the 300GB? Why is it showing up as "Backups" when it used to indicate "Photos"? Are my photos safe on the external drive?
You have tested the library on the external drive, and so your photos are save there.
The local TimeMachine snapshot probably now contains a backup of the moved library. Try, if connecting your Time Machine drive will reduce the size of your local Time Machine snapshots.

Output shows the single line

Dear All
I have a form which shows the output for only one line for a give parameter. But when the same query is copied from the form it shows all 36 rows in backend. i think the issue is becuse of property palette.
Kindly update it.
regards
Arifuddin
Edited by: user11309801 on Feb 13, 2011 3:17 AM

Ask your question at the Forms Forum @ Forms

Why are my vector lines showing as dashed lines in my artwork?

This is the jpeg generated from my file. What are those dash lines doing there?

Hi,
It depends which is the "front" device as it were for the ID that you are using and whether the device he sees the iMessages on is actually getting a sync version.
Lets say he has an iPhone and an a Mac.
To go one stage further we will say he Sends, when starting a conversation, from the iPhone Number on the iPhone and the Apple ID on the Mac. (this not actually important but used to pint out we are talking about two IDs on Two Devices)
When you send to the iPhone Number the iPhone is the receiver and the Mac is the Sync Device.
The reverse is true when you send to the Apple ID as the iPhone becomes the sync device.
Now lets presume you are sending to the iPhone Number but for some reason the iPhone is Off line (not connected to the home Wifi, no Carrier service at home, Powered off as using Messages on the Mac and so on)
In this situation the iPhone is incapable of telling the iMessages servers it has received the iMessages with the pic.
On the other hand the Mac version gets the Sync.
As a Sync it does not reply to the server that it has received it or whether it is read or or not.
The reverse is true if the Mac is shut down and they are iMessaging on their iPhone.
The issue is that in this case "Sync" is only "Display on All devices" and not a linked service that you might get with other messaging services or anything like an IMAP server being used by two computers with email.
8:39 pm Saturday; June 7, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Only showing the first line.

When I compile and run this program, it only prints out the first line of text. Any idea's why it might be doing this?
public class app {
     public static void main(String[] args)
          int years;
               years = 1000;
                    System.out.println("Millenium = " +years);
          int days;
               days = 365;
                    System.out.println("Year = " +days);
          int hours;
               hours = 24;
                    System.out.println("Hours = " +hours);
}

What are you expecting it to do? Do you want an applet instead?
public class Test extends JApplet
   String message;
   public void init()
      message = "Hello World!";
   public void paint(Graphics g)
      g.drawString(message, 5, 5);
}

How do I hide the axis but show the grid lines in CNiGraph?

I'm trying to create an oscilloscope like view for real time display of multichannel data. Each channel is supposed to be presented in it's own graph. All graphs are vertically stacked in one column.
How can I turn in the gridlines to give me ten divisions while having the axis hidden?
When I hide the axis the gridlines are hidden as well. Furthermore, I cannot seem to get the coordinates for the plot area so that I can draw the grids myself.
The view I'm trying to create will look similar to the NI BioBench acquisition software which can be seen at: http://sine.ni.com/apps/we/nioc.vp?cid=10435〈=US
Thanks,
Johnny Sundblom

Try this:
Bring up the property pages for the graph and go to the Ticks tab.
Check the Major and Minor boxes in the Grid Lines section.
Make sure that all check boxes in the Tick Marks section are unchecked.
Make sure that all check boxes in the Labels section are unchecked.
Make sure that the Axis Caption is cleared.
I think this will do what you want.
- Elton

Other Components Drawing Dashed Lines doesn't compile with Flex 4

The lib was created in 2006 so it doesn't compile with Flex 4.
The lib can be downloaded here http://www.quietlyscheming.com/blog/charts/dashed-lines/
When compiling I get this error:
Description Resource Path Location Type
1136: Incorrect number of arguments. Expected 3. GraphicsUtils.as /arrows/src/qs/utils line 66 Flex Problem
The line which doesn't compile:
stroke.apply(target);
How do I fix this error?

I managed to compile the lib by rewriting the line:
stroke.apply(target, new Rectangle(), new Point());
But I don't understand what I have done.
All Rectangle and Point dimensions are 0, but I'm sure it shouldn't be this way.

How can I save the all the values of a tree control ?

I have a problem, in run time, I adds new items on a tree control, but i don´t know how I can save the values of the child text of each item in a file.
Thanks.

I'm no expert on the tree control, but I made a small example to save all items to a textfile, including item tag, item string, and indent level. One drawback of this method is that it fully expands the tree regardless how the user left it. To go the other direction, you'd have to write a routine to go through the text file and programmatically build the tree.
To master the tree control, I think you have to resort to creating a control reference for it and using the Invoke Node to do some operations. For another approach to traversing and operating on a tree, check out the "Traversing Tree Controls and Setting Custom Symbols" (search the NI Developer Zone site).
Best of luck,
John
Attachments:
Save Tree Structure to Textfile.vi ‏32 KB

How to open the file in a tree control

I use a tree control to list all files in a selected directory, I checked the sample with LV (Directory hierarchy in tree control.vi) and want to add a function like following:
Atfer listing all files, if I click a file listed in the tree control, the computer can open the file automaticly.

Hi,
you can use the "Open URL in Default Browser.vi" to open all the files you select in your tree.
Mike
Attachments:
Directory Hierarchy in Tree Control_LV85.vi ‏35 KB

Could i show the dashed-line of Tree Control in Flex 1.5

Similar Messages

Maybe you are looking for