Could I update the schedule date by the add-in software OpenPS?

I create the R/3 PS WBS using the add-in software OpenPS from MS Project at the beginning. But according to our company working business , I can't update the WBS schedule date by updating the activity schedule date under the WBS, i can only update the WBS schedule. (so I have done some set-up and set the duration of every activity is zero). I hope I can update the schedule date by the add-in software OpenPS from MS Project during the R/3 system is online running(NOT the beginning).
We know the adjustment of schedule in MS Project is very easy and convinent. So if I adjust the schedule in MS Project, and I update the schedule in R/3 PS by the add-in software, then everything will be good.
But maybe this operation will have a bad effect on the running R/3 system.
Please give me some advice and practice experience.

Hi Sanjay,
You really MUST try things BEFORE saying that they are wrong.
The CDHDR table DOES store the creation date AND time because the system treats the creation as a Change.
If you simply enter ME51N as the transaction code in SE16N for table CDHDR you will see that it is YOU that is wrong.
Please do try to verify your comments before challenging Seema in this way, who has provided a good and workable solution.
Steve B

Similar Messages

PC Sync could not update the data to the mobile ph...

Ok now I am a little annoyed with my Nokia 6680.
For the last four months it has been working fine but all of a sudden it has stopped synching with either of my PC's.
The phone connects ok and I can do file transfers etc however when I try to sync it fails with the message
"The Synchronisation has been Terminated!"
and
"PC Sync could not update the data to the mobile phone."
I updated PC Sync to latest version on both PC's and I have tried cable and bluetooth connections but get the same issue.
In the end I bit the bullet and re-initialised the phone and it began working again.... for three days and then its doing the same thing again. It still connects ok but no sync.
My Laptop is using WinXP SP2 and my home PC is on WinXP SP1.
Anyone able to help with this please, my phone is effectively now a paper weight and I will go back to Pocket PC phones again.

Thanks for the tip I had the SAME problem on the 6822 same error. The phone had been fine for a month or so. Then nothing would synch, thought it was the PC fixed / reinstalled the software changes options nothing would work same error.
Read your note, powered down the phone and Bingo all synched fine!
Thanks very much. I'm using a Nokia 6822

The workflow could not update the item, possibly because one or more columns for the item require a different type of information. Outcome: Unknown Error

Received this error (The workflow could not update the item, possibly because one or more columns for the item require a different type of information.) recently on a workflow that was
working fine and no changes were made to the workflow.
I have tried a few suggestions, i.e. adding a pause before any ‘Update’ action (which didn’t help because the workflow past this action without incident); checked the data type being written
to the fields (the correct data types are being written); and we even checked the list schema to ensure the list names and the internal names are aligned (they
are), but we still cannot figure out why the workflow is still throwing this error.
We located the area within the workflow step where it is failing and we inserted a logging action to determine if the workflow would execute the logging action but it did not, but wrote the same error message.
The workflow is a Reusable Approval workflow designed in SharePoint Designer 2010 and attached to a content type.
The form associated with the list was modified in InfoPath 2010.
Approvers would provide their approval in the InfoPath form which is then read by the workflow.
Side note - items created after the workflow throws this Unknown Error some seem to be working fine.
We have deleted the item in question and re-added it with no effect.
Based on what we were able to determine there don’t seem to be any consistency with how this issue is behaving.
Any suggestions on how to further investigate this issue in order to find the root cause would be greatly appreciated?
Cheers

Hi,
I understand that the reusable workflow doesn’t work properly now. Have you tried to remove the Update list item action to see whether the workflow can run without issue?
If the workflow runs perfectly when the Update list item action is removed, then you need to check whether there are errors in the update action. Check whether the values have been changed.
Thanks,
Entan Ming
Entan Ming
TechNet Community Support

The workflow could not update the item, possibly because one or more columns for the item require a different type of information using Update Item action

I got error "The workflow could not update the item, possibly because one or more columns for the item require a different type of information "I found out the cause is Update Item action
I need to update item in another List call Customer Report ,the field call "Issues" with data type "Choice" to yes
then the error arise . please help..

Thanks for the quick response Nikhil.
Our SPF 2010 server is relatively small to many setups I am sure. The list with the issue only has 4456 items and there are a few associated lists, eg lookups, Tasks, etc see below for count.
Site Lists
Engagements = 4456 (Errors on this list, primary list for activity)
Tasks = 7711 (All workflow tasks from all site lists)
Clients = 4396 (Lookup from Engagements, Tslips, etc)
Workflow History = 584930 (I periodically run a cleanup on this and try to keep it under 400k)
Tslips = 3522 (Engagements list can create items here, but overall not much interaction between lists)
A few other lists that are used by workflows to lookup associations that are fairly static and under 50 items, eg "Parters Admin" used to lookup a partners executive admin to assign a task.
Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties.

ITunes could not update the carrier settings on your iPhone

When I try to download and install the new carrier settings file, I get the message "iTunes could not update the carrier settings on your iPhone. You do not have enough access privileges for this operation." (I got a similar message when I tried to download and install the OS update.)
I've been able to work around the problem by creating a different user and installing from there. But I'd like to be able to find and correct the cause of the error message instead of using a workaround. It seems like there's a file or folder somewhere that has somehow become read-only. Does anyone know where iTunes downloads the carrier settings and OS update files?

Jim VanLeeuwen wrote:
You will find them in separate folders within your user account Library/iTunes folder.
That was it. Somehow the owner of ~/Library/iTunes got changed to root.
Jim VanLeeuwen wrote:
Have you tried using Disk Utility to Repair Permissions?
Right after I posted the message I thought that the age-old placebo of repairing permissions might actually fix my problem. Because of your quick reply I found the ownership problem before repairing permissions. So here was the perfect chance for a test. Repair Permissions ran successfully but the owner of ~/Library/iTunes was still root. Repair Permissions fails the test.
I manually changed the owner to steve and was able to download and install the carrier settings.
Thanks!

HT1923 I could not update the new version of itunes. I uninstalled the previous version, but I cannot get the new version to update on my windows 7 i5 pc..any solutions? thanks

I could not update the new version of itunes 11.1.4.
It told me to uninstall the old version, but I cannot install the new version.
Any help?/ solutions?
Thank you

Hello jasopz,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Best of luck,
Mario

TS4431 Hi after trying to update my iPhone 5s while connected to iTunes on the Mac I got a notice saying it could not update the phone (error message: (-1)). Any idea what this error message means? Is it a space issue?

Hi after trying to update my iPhone 5s while connected to iTunes on the Mac I got a notice saying it could not update the phone (error message: (-1)). Any idea what this error message means? Is it a space issue?

Resolve iOS update and restore errors

Windows Could Not Update the Computer's Boot Configuration. Windows Server 2012

I am trying to install Windows Server 2012. When installing, I get the message Windows Could Not Update the Computer's Boot Configuration. Installation
cannot proceed. It cancel the installation. Can anyone help me with my problem?

Hi,
Any update about the issue?
Please post more detail information about the issue?
How did your do the installation? clean install or override install?
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Windows could not update the computer's boot configuration. via UEFI installation

I recently performed a clean WIndows 8.1 installation using my new Hard drive. However, under UEFI mode from BIOS, everytime the setup process reaches the "Installing Updates" stage, I kept on receiving an error "Windows could not update the
computer's boot configuration, Installation cancelled.
I was a bit puzzled as everytime I install Windows 8.1 via LEGACY mode from BIOS, setup finishes! I cannot tell whether I need to mod my BIOS or what.
please help.
raymund r

Hi,
Please make sure that Delete all partitions/volumes on the disk # (ex: Disk 0) that you want to install Windows 8.1 as UEFI on until that disk # shows as unallocated space.
Try again to install Windows 8.1 again.
If it still fails, please post back the setuperr.log and setupact.log under C:\$WINDOWS.~BT\Sources\Panther\ for our research. You can copy them out in WinPE command mode.
Also, I would like to check if you use bootcamp to install Windows 8.1 on Mac computer. If so, check the solution here:
https://discussions.apple.com/thread/5491283?tstart=0
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Kate Li
TechNet Community Support

Windows could not update the computer's boot configuration. Installation cannot proceed.

HELP!!!
Windows could not update the computer's boot configuration. Installation cannot proceed.
The installation then it says "The installation was canceled" and "Any changes to your computer won't be saved.
I have been trying to sort this out for over 15 hours.
I have the MacBook Pro (Late 2011)
Quad Core i7 (Clocked at 2.2GHz)
4GB Ram
Radeon Graphics (512mb graphics ram)
Running OSX Yosemite (10.10.2)

Did you have to modify Bootcamp Inof.plist to see the USB Installer option?
Your USB device needs to be a USB2 device. Here is an example.

Error ''windows could not update the computer's boot configuration"

i have an Hp pavilion dv 6 -3045 product wr747ea#abe ,till now i installed windows 7 on it several times but this time after i formated the partition and started the instalation from usb at completing the installation a message popup ''windows could
not update the computer's boot configuration''.Also i tried with another copy of windows 7 also booted from usb but i get same message at same step. I used a memory stick and bootable windows 7 from usb with Rufus program.
Please any sugestions ?

Hi,
Please make sure you have format the system drive and perform a clean install, not just override or upgrade from the previous system.
The bootloaders for Windows Vista and Windows 7 are quite similar, you could have a look at this article and see if it's helpful to you:
When I try to upgrade an earlier version of Windows to Windows Vista, I receive an error message: "Windows could not update the computer's boot configuration"
http://support2.microsoft.com/kb/931697
Karen Hu
TechNet Community Support

Windows could not update the computer's boot configuration Server 2012

I'm trying to install Windows Server 2012 on another partition (V:) that I create directly from Disk Management. After I create it, I do a simple format of the partition.
Next, I try to Install Windows Server 2012, directly on the recent partition, after the setup is completed, Windows Server 2012 boots to the Getting the devices
ready section, but stops and throws me this error.
Windows could not update the computer's boot configuration
After that the computer, restarts and it goes on and on unable to create a multi-boot environment. What's killing me is that I have done this on the past like 10 times and never run to this problem.
I'm running Windows 7 Home Premium on an ASUS K45 64 bit.

Hi,
You can try adding a new boot entry by using bcdedit tool:
Adding Boot Entries
http://msdn.microsoft.com/en-in/library/windows/hardware/ff541231(v=vs.85).aspx
Or you can build a usb-bootable deivce to install the image:
Walkthrough: Create a Bootable Windows PE RAM Disk on a USB Flash Disk
http://technet.microsoft.com/en-us/library/dd744530(v=ws.10).aspx
Hope this helps.

Update the original system software in my iPhone 4?

Update the original system software in my iPhone 4?
I am helping a friend having problems updating the system in her iPhone 4.
She has verizon service for the phone. She owns an iMac G5 running 10.4.11.
When she plugs her iphone 4 into her iMac G5 she can't get past an error saying
tht her computer system software is to old to update the iPhone 4.
I am sure there are many people using new iphones with older computers,system.
There should be some way to update her iPhone 4 to iOS 4.3.4 Software Update
with her iMac G5. If not, what about doing it with my up to date Intel Mac Pro?
I can't believe that buing a new iPhone forces you to buy a new computer to keep
it up to date? That is not like Apple at all. Thank you for your time and patience.
W.W.

Basically, this is correct. If she has a Mac running 10.4.11, then she is unable to download iTunes 7, which is what you need to be able to update to the latest software - iOS6.0.1 or use an iPhone 5.
To be able to update your Mac to iTunes 7, you need to have Snow Leopard or above installed, Snow Leopard being 10.6 and you also need an Intel Mac to be able to instal Snow Leopard. Apple are sending people free upgrade DVD's of Snow Leopard so that you can upgrade if applicable and then from there and once you have upgraded you can get the Mac App Store where you can then download Lion and Mountain Lion. All upgrades are then CD free.
There is no point in her upgrading from your Mac, because it won't then sync with any of her own things that she has.
Either she will have to leave her phone the way it is or wait until she is ready to purchase a new and more up to date Mac and then go from there.
Mac OS 10.4 is old now in computer terms, so it does pay to keep your system and computers reasonably up to date as and when you can afford it, but especially the OS.

Update the add-on (Baseline)-BP-ERP 605V3

Hi
How can I update the add-on (Baseline)-BP-ERP 605V3 for BP-ERP 605v5?
During activation of Building Blocks, reports the following message:
"Your add-on BP-ERP, 605v3 release is not up to date."
In the marketplace only have the installation of add-on http://service.sap.com/swdc (installation and upgrade).
Any ideas?

The sap has accessed my environment and made adjustments to solve the problem

I updated the system and software final cut.

Hello friends
I updated the system and software final cut.
After the software update course and Motion me all the time after 6 seconds.
I did everything you could.
Until I got old program 10.4.1 and everything works.
What do I need to do.
Attached is the Mac specs
I also tried to Repair Permissions on your system drive and not solved the problem

I open the program within 6 seconds it crashes.
An hour ago I was still on the software without Updated with no problem.
Even Motion Course

Could I update the schedule date by the add-in software OpenPS?

Similar Messages

Maybe you are looking for