Could I use iBook to upgrade iMac with dead CD/DVD drive?

I don't speak computer very well.......I was wondering if I could upgrade my old iMac by using the iBook as an external Hard drive. I tried using a firewire connection and holding down the T key. It worked for file transfer, but not upgrading the OS. Is it possible? I have the Tiger disc in the iBook.

Yes, it should work.
You need the iMac to be the Target Disk in FireWire Target Disk Mode. This means holding down the T key on the iMac. Then start the Installation from the Tiger disc, selecting the iMac's hard drive (on the iBook's Desktop) as the drive for the installation.
If it is the Graphite iMac you are upgrading, be sure that the firmware is up-to-date.

Similar Messages

  • How is it possible to install Windows 7 via USB-Stick on a 2009 iMac with a broken DVD-Drive?

    Hello,
    i have a 2009 iMac and Windows 7 64bit in my Boot Camp.
    Windows is now slow and needs to be reinstalled.
    The problem is the DVD-Drive in my iMac is broken, so i can't use my Windows-install-DVD.
    How can i reinstall Windows 7 via USB-Stick on a 2009 iMac with a broken DVD-Drive?

    F3Spirit wrote:
    Thank you,
    I try this.
    Also check this one out
    But i think you would be far better served by installing Windows in a virtual machine.

  • Installation of leopard from one mac mini to another with dead CD/DVD drive

    Is it possible to install Leopard on to an older mac mini that has a nonfunctioning CD-RW/DVD-ROM drive but otherwise works fine for what it is
    Hardware Overview: Machine Model: Mac mini
    CPU Type: PowerPC G4 (1.1) CPU Speed: 1.25 GHz
    L2 Cache (per CPU): 512 KB Memory: 256 MB
    Bus Speed: 167 MHz Boot ROM Version: 4.8.9f1
    Serial Number:
    TOSHIBA MK4025GAS:
    Capacity: 37.26 GB
    Model: TOSHIBA MK4025GAS
    Revision: KA100P
    Serial Number:
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk0
    HARD DISK:
    Capacity: 37.13 GB
    Available: 9.02 GB
    Writable: Yes
    File System: Journaled HFS+
    BSD Name: disk0s3
    Mount Point: /
    MATSHITA CD-RW CW-8123:
    Manufacturer: MATSHITA
    Model: MATSHITA CD-RW CW-8123
    Revision: CAD4
    Serial Number:
    Drive Type: CD-RW/DVD-ROM
    Disc Burning: Apple Supported/Shipped
    Removable Media: Yes
    Detachable Drive: No
    Protocol: ATAPI
    Unit Number: 1
    Socket Type: Internal
    FROM a mac mini that HAS a functioning CD/DVD drive
    Model Name: Mac mini
    Model Identifier: PowerMac10,1
    Processor Name: PowerPC G4 (1.2)
    Processor Speed: 1.42 GHz
    Number Of CPUs: 1
    L2 Cache (per CPU): 512 KB
    Memory: 512 MB
    Bus Speed: 167 MHz
    Boot ROM Version: 4.8.9f4
    Serial Number:
    MATSHITA CD-RW CW-8124:
    Firmware Revision: DACD
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipping Drive)
    Cache: 2048 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    Write Strategies: CD-TAO, CD-SAO, CD-Raw
    Media: Insert media and refresh to show available burn speeds
    I thought maybe I could do it with firewire but no luck...
    any help would be greatly appreciated
    Message was edited by: Moderator

    k...
    Boot the mini into TD mode
    Connect it to the "other" Mac
    Insert the install disk in the "other" Mac
    Start the installer which will reboot the "other" Mac
    Once the "other" Mac has restarted and is running from the install disk, you should be able to select the Mini's drive (the FW disk) as the install destination. If not, go into the Disk Utility (under the "Utilities" menu) and check out the FW disk. You may need to "repair" it, repair permissions or reformat it depending on the condition of the disk and the type of partition it contains.

  • Dealing with dead cd/dvd drive

    So my cd/dvd drive seems to be completely dead. I purchased a Sony dvd rewritable drive (DRX-830UL-T). But, duh, the included software I need to install to get it going (apparently Toast 6 Lite) is on CD, and of course, my drive doesn't recognize anything now.
    Anyplace I can get the download online, given that now I've paid for it, so I can get to writing my DVDs again?
    Thanks for any suggestions.
    iMac G4   Mac OS X (10.3)  

    Toast won't help read CDs/DVDs, it's only for burning. Try installing the Patchburn driver. 
    cheers
    mrtotes

  • Upgrading iMac with CD drive only to Tiger?

    How can I upgrade an older iMac with only a CD drive (no DVD drive) to Tiger? Can I boot to DVD from a USB external HD?

    sjesser:
    Can I boot to DVD from a USB external HD?
    No. Your Mac will not boot from a USB drive. You need a Firewire device.
    To install Tiger your computer will need to meet the minimum system requirements for Tiger.
    You will need to purchase the Full Retail version of Tiger, which can be purchased from the Apple Store or, on CDs, from applerescue. See this article for options on Installing Tiger without a DVD drive.
    Be aware that Computer specific or upgrade versions should be avoided since they are optimized for the computer to which they are specific and will therefore very likely cause problems during or after installation. On the legal side, it may be a violation of the Software License Agreement which statesThis License allows you to install and use one copy of the Apple Software on a single computer at a time. This License does not allow the Apple Software to exist on more than one computer at a time...
    Good luck.
    cornelius
    Message was edited by: cornelius

  • How do I use my late 2011 iMac ( with thunderbolt) as external monitor for laptop/Xbox or other device with hdmi as output.

    May be this question has been asked thousand times. how do I use my mid 2011 iMac ( with thunderbolt) as external monitor for laptop/Xbox or other device with hdmi as output. if apple hasn't removed that feature and has just moved that functinoality to thunderbolt then how can I use it. currently there is no laptop available with thunderbolt output. no 3rd party converter available. whats the use of having feature on latest functionality if we cant use it. I wish they would have made one port has mini-dvi and other thunderbolt for backward compatibility untill some vendor comes up with converter.

    It Says :
    Mac (21.5-inch, Mid 2011) and iMac (27-inch, Mid 2011) and later computers support Target Display Mode via Thunderbolt to Thunderbolt cable (2 m) when the source is another Thunderbolt-equipped computer.
    Name one computer model/vendor which has thunderbolt as output for display + audio. this is so stupid to move to new technology without availbility of its compatible devices.

  • I use Safari in my imac with Google as my search engine. Recently, Bing took over. Extensions shows Google as default search engine, but Bing is what is working. How do I get rid of Bing, go back to Google?

    I use Safari in my imac with Google as my search engine. Recently, Bing took over. Extensions still shows Google as default search engine. Search starts as Google but switches to Bing. How do I get rid of Bing, go back to Google?

    Hey ravenbird1,
    Thanks for the question. After reviewing your post, it sounds like you want to use a specific search engine.
    Safari 7 (Mavericks): Search the web
    http://support.apple.com/kb/PH17150
    To set the default search engine, choose Safari > Preferences, then click General.
    If you are having problems with extensions you can uninstall and reinstall the extension.
    Safari 7 (Mavericks): Install and update Safari extensions
    http://support.apple.com/kb/PH17200
    Select the extension, then click Uninstall.
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • Can you install tiger on a power mac g4 with out a DVD drive if so how, I do have have a 2011 iMac can I use that in target disk mode with a FireWire cable any help would be appreciated

    Can you install tiger on a power mac g4 with out a DVD drive if so how, I do have have a 2011 iMac can I use that in target disk mode with a FireWire cable any help would be appreciated

    Hello,
    You need to put the Tiger Install Disc in the 2011 iMac, boot the 2011 uMac into Target mode...
    http://support.apple.com/kb/HT1661
    Boot the G4 holding the Option or alt key, hopefully the Install Disc in the 2011 iMac will show as a boot choice.
    We just want to use the 2011 iMac as a big expensive FW Optical drive, it cannot be installed osing the 2011 iMac itself.

  • I'm looking into the possibility of using Photoshop CS2 on Imac with Mavericks OS. Is this even possible, and if not, what would I need to do?

    Is it possible to download and use Photoshop CS2 on Imac with Mavericks OS?

    This is not a photography question.  It is an application specific question,  Please post in the Photoshop forum.
    Photoshop General Discussion
    Remember, you are not addressing Adobe here in the user forums.  You are requesting help from volunteers users just like you who give their time free of charge. No one has any obligation to answer your questions.

  • Cannot connect using FaceTime on my IMAC with an iPhone 5

    Cannot connect using FaceTime on my IMAC with an iPhone 5.

    sry, but you posted this in the wrong forum
    this is the PowerPC forum, which is for machines built before about 2001.
    post it in the INTEL forum

  • Is Iphone 6 bought from apple online store (T-Mobile) locked or unlocked? and could I use it in other countries with different carriers?

    Is Iphone 6 bought from apple online store (T-Mobile) locked or unlocked? and could I use it in other countries with different carriers?

    Is Iphone 6 bought from apple online store (T-Mobile) locked or unlocked? and could I use it in other countries with different carriers?

  • Upgrade imac with tiger to lion,it's possible?How? I have a intel core 2 duo imac...thanks

    Upgrade imac with tiger to lion,it's possible?How? I have a intel core 2 duo imac...thanks

    Where did it say that? If your computer meets the requirements you can install Snow Leopard and then install Lion via the Mac App store. They both cost $30
    SL
    http://store.apple.com/us/product/MC573Z/A
    Lion
    Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
    2GB of memory
    OS X v10.6.6 or later (v10.6.8 recommended)
    7GB of available space

  • Can i use imac's internal CD/DVD drive to install windows 8.1 pro on macbook via ethernet or firewire or other than purchasing an external drive??

    can i use imac's internal CD/DVD drive to install windows 8.1 pro on macbook via ethernet or firewire or any method other than purchasing an external drive??

    Note: These types of discs or activities are not supported by DVD or CD sharing:
    DVD movies.
    Audio CDs.
    Copy protected discs such as game discs.
    Install discs for an operating system such as Microsoft Windows (for use with Boot Camp), or Mac OS X.
    Burn a CD or DVD

  • I've just bought a new iMac with 2 TB hard drive. Can I partition the startup drive?

    I've just bought a new iMac with 2 TB hard drive. Can I partition the startup drive?

    Glenfern wrote:
    The reason I'm considering partitioning is - I'm going to transfer about 50 GB of family photos & music to the iMac. Over time the photos & music library is going to grow. My idea was to point the iphoto & itunes library to the new partition so that the application programs (that will will reside in partition 1), will not get congested with photos & music over time & degrade performance. Also, I dabble a little bit with the music editing program LOGIC & Sound Track Pro, which creates lots of little music files in the process.
    In your case I would strongly recommend against partitioning, as dwb mentions a drive loaded with data on an
    O SX system doesn't equate to  performance loss. However partitioning does. If you were going to tell me you were partitioning to load different OS's on the computer then you would have a good reason to think about partitioning. My suggestion is do not partition.
    What I would also recommend is getting some high quality high speed external HD's to store your photo and music libraries on. This helps keept the 2GB drive available while maintaining performance. I have 3 external HD's attached to my iMac, two are backup drives (1 Time Machine & 1 Bootable Clone) the third drive is for storing my my music, photo & movie libraries on. If you go this route the 3 drives I'd recommend are:
    http://g-technology.com/products/g-drive.cfm
    http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
    http://www.lacie.com/us/products/product.htm?id=10330
    Personally I use the Lacie's however OWC or G-Tech would also be welcome on my desk.
    Again if you want to take this path Apple has instructions for how to move the libraries to EHDs, if you want those links let me know.

  • IMac  with SSD and Hard drive very slow startup time

    I have a new mid 2011 iMac with a 250gb SSD drive and a 2TB drive. All are from Apple as BTO options. When I first used the iMac my typical startup time from the hardware check chime to desktop was typically 12 seconds. Something, somehow has been changed because now it takes over one minute to boot up from the SSD. After the chime I hear the fans running and also the 2tb drive.  After about 20 seconds I hear the hard drive spin down and then after another 20 seconds it starts up again. Once it starts up the boot up sequences contiunes and returns to the desktop. After this the iMac perfprms as normal. I have tried running disk utility from the recovery partition. I have also reinstalled Lion as well from the recovery partition and neither of these change the outcome.
    When I first got the iMac I used time machine to restore from a previous machine into the 2tb partition and then went into advanced options in System preferences>Users&Groups to point to my home folder on the 2Tb drive rather than the default one on the SSD. That was working fine until I discovered software problems with both Preview and Textedit where they would not start up with this arangement. I then repointed my home folder to the default one on the SSD which cured this issue with these programmes leaving my data remaining on the 2Tb drive. Since doing this I have had the one minute boot up problem.
    Can anyone offer any advice as to how I may overcome this problem and get my iMac back to starting up in twelve seconds from the SSD as it did before.  Any help would be appreciated on this topic.
    Thanks.

    Where do you maintain your Home folder - on the SSD or on the HDD?
    If you want to do a clean install (from scratch) then do the following:
    Install or Reinstall Lion from Scratch
    If possible backup your files to an external drive or second internal drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
    Select Disk Utility from the main menu and click on the Continue button.
    After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Erase tab in the DU main window.
    Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
    Quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Install button.
    Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.
    Before you go to the extreme of the above would you do this:
    Open Activity Monitor in the Utilities folder.  Select All Processes from the Processes dropdown menu.  Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.
    Just in case your system slowness is due to something eating up CPU time. Oh, and if your system is brand new check the upper right corner of the menubar for a "dot" inside the Spotlight glass. This means Spotlight is indexing the drive. Until it finishes your system will be quite sluggish.

Maybe you are looking for

  • Layout always resets in Adobe Bridge

    Hi, every time I restart my PC, the layout in Bridge resets. Starting Bridge as an Admin doesn't help. I'm running Photoshop/Bridge CS6 on Windows 8 (64bit) I put in two screenshots to show the before and after: It isn't a big deal, but it's anoying

  • Using Exec on a SQL Query

    Hi. Why it doesn't work in the SQL Query of Crystal? EXEC ('USE ZZZ_'+{?Base}) SELECT........................ {?Base} is a string variable and its value is correct Thanks

  • Are network shares backed up by TimeMachine?

    I know that when I have an external drive, it gets backed up with Time Machine. I wonder what happens with a mounted network share, will it also be backed up? I like having Time Machine atumatically backing up my external drives, but I don't want it

  • Error in Creating PR

    I have just created a materail in MM01 for CAT 6 cable in Operating supply category Now when i select this materail in PR , it gives error " materila 3000XXXX not maintained by purchasing " i have mentio the same plant in this materail as in older ma

  • Remover Header/Footer Preset when printing from Safari

    I just bought a MacBook Air and I've connected it to my wireless HP 8100 OfficeJet Printer. Anytime I print from safari it automatically prints the header and footer - how can I change this setting?