Could I use other movement type in ME2O copy from 541?

Dear friends,
Could I use ME2O with other movement type copied from 541 ? or only with 541 ?
Is it customizable ?
Best regards,
Ale

You can Use only 541 Movement Type in ME2O that too System Propose this Automatically. So, You cannot Select Movement Type in ME2O.
You can use MB1B also For Transfer Stock to Subc. Using 541 Mov type. MB1B is Multipurpose.
Regards,
Ashok

Similar Messages

Error when using 557 movement type to remove stocks from intransit

Dear All,
We have some stocks left in intrasit where we use only inventory management to do this stock transfer(ie. we are not using STO),now we want to remove this stock from intransit. When i tried to use movment type 557 I got an error (Deficit of PL Stock in transit 10 DZ : CHS10088 2KUR 0000000867) with message number M7021. I cross this material with mb52 to find the avalability of this intransit stock and found that it is available at given plant but with out a batch number. When I tried to use this movement type it asks for a batch number so i have given an available batch number. Can you please help me to remove this stock from intransit.
Thanks & Best Regards,
Chameendri

Hi
the movement types 557 ( and 558 ) can only be used to update intra-company
transit stock which is saved in MARC-TRAME. IF you are using purchase
orders cross-company stock transfers, the transit stock is only a virtual transit stock what is calculated
based on the purchase order history. So this issue cannot be addressed
by changing the data in a stock table.
Are you using intra-company STO ?
Please check carefully note 392205 that contains the report ZTRAME
.Please see the following information:
A report attached to the note 392205 tries to explain the stock in
transit using the documents existing in the system. First verify the
current stock in transit situation using the report ZTRAME as per the
note 392205. This program tries to 're-calculate' the stock in transit
based on the material documents and the purchase order history.
Based on the results of the program the movement-types 557 and 558 can
be used to correct the stock in transit (-> add or book out stock in
transit).
I hope this can be of help
BR
Nadia Orlandi

I want to buy app from appstore, but don't have credit card or visa card of that sort. So I would like to know if there is anyways that I could buy app using other payment type? Thanks.

I want to buy app from appstore, but don't have credit card or visa card of that sort. So I would like to know if there is anyways that I could buy app using other payment type? Thanks.

Get an iTunes gift card & redeem that in iTunes. You can setup an App store account without a credit card, but to purchase paid content you need a payment method.
http://support.apple.com/kb/ht2534

Sorting of bins by using WM movement types

Hello,
I want to have my sorting of bins in descending order when am using the movement type 999. For example, i have bins which name are 11, 12 and 13. When i used the WM movement Type 999, i want my TO created will trigger the bins in order of starting to 13, 12 and 11. where could exactly i need to define that given that the movement type 999 settings is blank data for source and destination source bin is blank.
thanks in advance!!
trek

Hello John,
The print code is the same for the movement types that i have used, it is 21.For the sort profile TO processing configurations, we have a standard data that we have followed for all the warehouses.Are there any ways where i could set the sorting of bins in decreasing or ascending depending on the movement types that i will used?
Thanks in advance!

Could not use the move tool because no layers are selected.

This problem started a few days ago. I like to hold down the "Shift" key when moving a layer (either text or image) to keep the horizontal spacing locked. It was never a problem but a dialog box is now popping up with the following note: Could not use the move tool because no layers are selected.
There's no problem if I'm not holding the "Shift" key but I can't keep the layer from moving up or down. I could just use the arrow key but sometimes I need to move the layer quite a distance.
Also, I'm noticing that if I don't have the cursor directly on the type/image layer, regardless of whether the "Shift" key is selected, a rectangle similar to when the "Rectangular Marquee Tool" is used appears and the layer I had selected is no longer selected.
Any ideas as to why this might be happening? Thanks for the help.

Sorry about that. I'm using Photoshop CS4. There are no layer masks and I'm working over a solid white background (although it's happening in all my files, some of which have multiple layers).
I'm mainly designing DVD sleeves, posters, invites, etc. The layers contain images, live text, vector smart objects, etc. and the problem is happening with all layers, regardless of what it is (text or image).
When I have the mouse directly over whatever it is I want to move and hold the shift key I get the "Could not use..." dialog box. When the mouse is NOT over the image/text, but I have the correct layer selected, I get the "Rectangular Marquee Tool" look, a "dashed" rectangular box wherever I've moved the mouse.
Hope the info is helpful and thanks for responding...

Difference between Mb1b 541 Mov type and ME2O

Hi,
I want to know difference between Mb1b 541 Mov type and ME2O.
Thanks and regards
Gitesh

Hi,
ME20 has 2 options one to directly transfer, that is without delivery. And, anotehr is with delivery.
Option 1 will create a material document in ME20 transaction.
With option 2 it will create a delivery note. you have issue the material in vl02n if delivery note is created and then material documetn will get generated.
regards
alexandro.

How to restrict end-user from not using certain movement-types in MB1B

Dear Gurus,
My client wants that end user has access to only particular movement types in MB1B.i.e only to 311 and 412,421E.
They do not want any other movement types to be access by end-users in MB1B
How to go about this requirement?
Thanks in advance
Regards
Ram
Edited by: RAMKUMAR WARIYAR on Jun 27, 2009 2:14 PM

hi,
This is possible you can restrict and allow user for movement type which they can do through any t code.
Contact yours BASIS consultant for that
Regards,
Vishal
Edited by: VS on Jun 27, 2009 5:46 PM

Movements types of the Returns from Customer

Hi Gurus,
Currently the Return Process from Customer is done using the movement type 651 that the batch quantity is posted in the Return Status but the finance people cannot see the finance values from this return before the transfer of the status.
Point 1:
I was wondering if you could inform me when I execute the movement type 453 that is transfer from Return status to Unrestricted Status they can see the finance values? Or to solve this point all returns must be done using the movement type 655 where the batch is posted in quality status and the finance people can see the finance values?
Point 2:
I am using the tcode MB1B for the movement type 453 to transfer the batch quantity from Return Status to Unrestricted Status but unfortunatelly the batch quantity is being posted for quality status.
In advance I would like to thank you for your attention. I'd be pleasure if you could give some tips for this process.
BR
Valdevair

Hi,
Use following procedure:
Create Return sales order(YERT), Post goods receipt(VL01N) and then post billing wrt sales order(VF01). Unless u create billing FI impact cannot be seen.
Regds-SRB

"uses a file type that is blocked from opening in this version" error message when opening a *.doc file with Word already running

Several customers running different versions of Office 2011 (14.4.1-14.4.5) on OSX varying from 10.7.5 to 10.9.5, running on various kinds of hardware (iMac/MacBook Pro/MacBook Air) of various ages are having issues opening *.doc files if the Word is already open. The error message that gets displayed is, "XXXX.doc uses a file type that is blocked from opening in this version"
When the customer tries to open the same file via File-Open, she gets "The file is locked for editing. you can open the file as read-only".
When trying to do so, she gets "Word cannot open this document. The document might be in use, the document might not be a valid Word document, or the file name might contain invalid characters".
If Word gets Force-quit, the same document opens without any problems.
1. Repairing Disk permissions was ran several times. and the volume was found to be OK.
2. I have noticed that in this scenario either deleting the normal.dotm or com.microsoft.word.plist (~/Library/Preferences) sometimes resolves the issue, sometimes it doesn’t. There is no pattern to follow. All versions of Office are affected, the fully updated and the non-updated ones.
3. I have tried completely removing the suite using Office 2011 Uninstall.app and/or Remove Office 2011 Uninstaller.pkg, then going through customer's library and manually removing all the Office references.
4. None of these systems had Office 2008 in the past.
Any help will be greatly appreciated.

Reboot both the Mac and the server. Word opens .DOC files and Excel opens .XLS files. As you have found out by copying the files to the computer. It is the connection between the 2 computer that is causing the error.

Movement type for stock transfer from investment order to the regular stock

Hi,
Is there any movement type for the transfer from investment order to storage location stock? We have wrong created purchase orders, where the GR transferred the items to the investment orders. The problem is, that there already a lot of invoices posted on this items..
Is there any clever solution?
Points granted,
Saso

Hi
In MTO scenario the stocks are manufactured for the particular sales order and in MMBE the stocks are managed as sales order stocks assigned to that particular sales order no
This is due to the sales order item cat in MTO carrying specal stock indicator as E
Opening these stocks to unrestricted is meaningless and not possible because costing and all would have been done according to the sales order
Non MTO scenario
+Note MTO stocks are different and sales order stocks are different+
All MTO stocks are managed as sales order stocks
But not all sales order stocks are MTO stocks
But if you want move the stocks from a sales order to unrestricted then MB1B movement type 411 E
Moving stocks from one sales order to another sales order MB1B movement type 413 E
Regards
Raja

Hi, I got iMac and I can not open file "doc" when I have downloaded from distance learning internet page. I have office program, but when I try to open file it shows: u1-assesment.doc uses a file type that is blocked from opening in this version.?

Hi, I got iMac and I can not open file "doc" when I have downloaded from distance learning internet page. I have office program, but when I try to open file it shows: u1-assesment.doc uses a file type that is blocked from opening in this version.?
I have tryed to change just extension from doc to docx, but it doesn't work. I am new user, please help

Consider the Mcrosoft Office:Mac forums as well:
Office for Mac forums
Here is an MS page that deals with that error message:
http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/bs0811doc-use s-a-file-type-that-is-blocked-from/548ce159-8157-419e-9552-1789594fafe9

WM: Return Purchase order process issue-Using 161 movement type

Hi
      i did return PO with using 161 movementype .when i do GRN, WM is appear 601 movement type and storage type is 916 .
      i think is wrongly triggered the movementype and storage type 916 .
      so where i made mistake the configuration.pls suggest me to do the configuration.
    with regards
   dinesh
Edited by: code acess on Jul 8, 2011 7:50 AM

You can ask SAP AG why it was designed this way - I already told you my explanation I have no better thoughts.
Just remark: WM-mvt 601 is not only related to sales process. Just check the WM/IM interface and you will see it (e.g. IM-mvt 261, IM-mvt 541 are assigned to it). I think it generally means outbound delivery process.
If the stock is not in the right place and system cannot find it based on the search strategy you use, you have to enter the data manually.
Edited by: Csaba Szommer on Jul 8, 2011 11:41 AM
Edited by: Csaba Szommer on Jul 8, 2011 11:48 AM

Use of movement type field (BWART), GR output determination

while configuring the mail message for Goods receipt, it was detected
that this happens only for movement type 101/105. But i want to shoot
an mail notification for GR with movement type 103.
I tried to use it by creating a new access sequence by creating a new
Table with fields movement type (BEART) and GR: Message (WEAKT). But
the message output is not getting triggered.
So will anyone would suggest me a solution of using movement type
as criteria for GR message output.
Regards

Hi
Try including this fields WEVER - Print version,
KZDRU- Print item in your access sequence table.
Define in the customizing under MM-> IM- >Print Control-> General Settings
define anew print item specific for 103
& Assign the same to 103 movemnt type in Maintain Print Indicator for Goods Receipt Documents
Create the condition record accordingly as per the access sequence.
Create the GR with 103, Flag the Print indicator in MIGO.
award points if useful
Thanks & regards
Kishore

Reduce Sales Order element from MRP using MIGO (Movement Types)

Hi Folks,
I was wondering if its possible to remove the Sales Order element from MRP through a movement type using transaction MIGO.
Basically we don't want to use a delivery document to do this.
Thanks in advance for your help.
Regards,
Gilberto Li

to remove the Sales Order element from MRP through a movement type
Sorry I am not sure whether I understood your requirement correctly. You need to reduce the inventory by doing MIGO instead throgh PGI which means, the movement type will also differ. Better if you can brief about your requirement, a suitable suggestion can be given.
Incidentally, this is not the right forum to post. You can post in the following forum
[Forum: ERP - Sales and Distribution (SD) General |SAP ERP Sales and Distribution (SAP SD);
thanks
G. Lakshmipathi

Use of Movement type 103 for goods confirmation

Hi All,
In SRM, as I understand, It always picks up 101 as Goods Receipt movement type during goods confirmation. But we want to use 103 as movement type instead of 101. Also we want to release from GR blocked stock using movement type 105 from SRM itself. We dont want to go to SAP Backend to release the blocked stock.
SO can you help me with the following:
1. How to change the movement type for GR from 101 to 103.
2. Can the release of blocked stock using 105 can be carried out from SRM?
Regards

hi,
your requirement is not possible in SRM.
In SRM there is no movement type concept .It is only is ECC6.0. Even the movement type 101 is also not appearing in
SRM. In the ECS (Extended Classic Scenario) after confirmation is done in SRM ,the movement type 101 is reflected in ECC6.0
similarly 102 - Return dely can be done in SRM.
But you can try..
Check the program for doing the confirmation in SRM.Try to modify the Program to suit your requirement.
Regards
G.Ganesh Kumar

Could I use other movement type in ME2O copy from 541?

Similar Messages

Maybe you are looking for