Could not able to access workbook from the favorites of User Menu

Hi all,
I have got a problem in accessing Workbook from the User menu (SAP GUI) Favorites.
I added a workbook to my favorites but now when i double click on the Workbook from my USER MENU (SAP GUI),
BEX is opening and the connection is also maintained but the workbook is not appearing in the BEX.
I checked in SU53 and this is not related to any authorization issues.
Could anyone help me in solving this issue and
providing ?

I can't aunderstand why it happens, but try adding the workbook to a role and assign the role to your user.
Hope it helps.
Regards

Similar Messages

I am not able to install apps from the Appstore in Iphone 5c. I tried to switch off my phone and switch it on again. But it still doesnt work

I am not able to install apps from the Appstore in Iphone 5c. I tried to switch off my phone and switch it on again. But it still doesnt work

Hello stuti1200
Check out the troubleshooting article below for issues with access to the iTunes Store. Also there was a small amount of outage accessing the iTunes Store this past Wednesday.
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Apple Services, Stores, and iCloud
http://www.apple.com/support/systemstatus/
Thanks for using Apple Support Communities.
Regards,
-Norm G.

I bought the apple iphone 4G J-5 from Laos and now want to use it in India using the normal Airtel SIM but am not able to make calls from the phone pla. help

I bought the apple iphone 4G J-5 from Laos and now want to use it in India using the normal Airtel SIM but am not able to make calls from the phone plz. help

Is this what you have? (see above?) That's what I get when I search for iPhone 4G J-5 in Google.
If so, this is NOT an iPhone! It is NOT made or sold by Apple. You have a cheap Chinese knockoff.

Could not make a new layer from the selection because the selected area is empty

I have Photoshop CS5 and I'm trying to do a selection on a new layer and when I copy it this message appears: "could not make a new layer from the selection because the selected area is empty"..
The new layer is selected, no other layer is selected. What the hell am I doing wrong???....Yes I'm a beginner.. ....please help?

Hi There,
So just to clarify you have made a new blank layer, made a selection on that layer and then done a Layer > New > Layer via Copy (or cmd J).
The reason that you would get this error message is you have made a selection on a blank layer (effectively selecting nothing) and tried to duplicate it and Photoshop won't let you do that.
When doing New Layer via Copy or New Layer via cut you selection needs to include some painted (coloured) pixels.
Regards
Paul
PS. Maybe you could explain what you are trying to achieve by copying the layer and I could help a little more.

WHCK - Not able to access Server from client machine

Hi,
Server is running in : \\testserver
Domain : ns.local
Client : testclient
Test Name : TDI filters and LSPs are not allowed
When the above test is run from the server side, Test fails with the following error:
Cause : Failed to Start the Task
Cause : Zero files are copied when Trying to Copy From Path "\\testserver.ns.local\TaefBinaries\x64"....Failing the Task
Failure : Failed to Start the Task "Copy TAEF Binaries"
Cause : Failed to Copy File : "\\testserver.ns.local\TaefBinaries\x64" Dest : "C:\WLK\JobsWorkingDir\Tasks\WTTJobRun6A2E5AF3-8C3E-4425-9997-5B809CAC2BB1\"
Cause : Cannot Find Pattern "\\testserver.ns.local\TaefBinaries\x64"
From WttEa.log , it displays "The network path was not found".
CRunManager::ExecutionAgent: Working Dir C:\WLK\JobsWorkingDir\JobRuns\WTTJobRun6A2E5AF3-8C3E-4425-9997-5B809CAC2BB1
CRunManager::ExecutionAgent: Saving RunXML to file C:\WLK\JobsWorkingDir\JobRuns\WTTJobRun6A2E5AF3-8C3E-4425-9997-5B809CAC2BB1\WttJobRun.Xml
CRunManager::ExecutionAgent: Saving EaDataXML to file C:\WLK\JobsWorkingDir\JobRuns\WTTJobRun6A2E5AF3-8C3E-4425-9997-5B809CAC2BB1\WttEaData.Xml
CRunManager::UserName : DTMShareUser
CRunManager::Domain : TESTSERVER
CRunManager::Password : Server2008,WTT5326ShareUser
Build No Greater than 4000. This is a Windows Vista Machine
Single User TS Enabled
Comparing TESTSERVER testclient.ns.local 10
Logon Netonly
GetUserToken : Returns 0
Error: 0x35, The network path was not found. WTTCreateDirPAth : CreateDirectory \\testserver.ns.local\HCKLogs\EaFolderAccessCheck\CF82A2A5-E08D-49C7-A078-4BA1416F1AA1 Failed File=d:\wtt25\wtt25\sdktools\wtt\jobs\runtime\wttexecutionagent\common\eautil\src\eautil.cpp
Line=1589
Error: 0x80070035, The network path was not found. (Error ( status = 53 ) in call: WttCreateDirPath(lpszTemp) ) File=d:\wtt25\wtt25\sdktools\wtt\jobs\runtime\wttexecutionagent\eamanager\runmanager\src\runmanager.cpp Line=2232
Retrying the log location creation 10 more times
Error: 0x35, The network path was not found. WTTCreateDirPAth : CreateDirectory \\testserver.ns.local\HCKLogs\EaFolderAccessCheck\CF82A2A5-E08D-49C7-A078-4BA1416F1AA1 Failed File=d:\wtt25\wtt25\sdktools\wtt\jobs\runtime\wttexecutionagent\common\eautil\src\eautil.cpp
Line=1589
Error: 0x80070035, The network path was not found. (Error ( status = 53 ) in call: WttCreateDirPath(lpszTemp) ) File=d:\wtt25\wtt25\sdktools\wtt\jobs\runtime\wttexecutionagent\eamanager\runmanager\src\runmanager.cpp Line=2240
What could be the problem ??? What steps need to be done or checked further to proceed ??
Could you please help why the client is not able to access Server ???
Thanks.
Regards,
Pradeep VR

Hi,
Reason for this failure is that the test executable is not present in the HLK controller.
It looks like a Microsoft issue. We have faced same type of problem for other tests also. Our problem gets fixed in HLK 10056.
If you face the problem in current build also, then please log a bug to Microsoft.
Thanks,
Arpo

User has appropriate permission, still not able to access one of the sharepoint site applications.

Hi,
I have tried all solutions available on internet regarding this problem but none seems to work.
As per one solution I added the user in sharepoint site collection administrator group still no luck!
As per another solution I tried to run “User Profile Service Application Proxy – User Profile to SharePoint Full Synchronization”
“User Profile Service Application Proxy – User Profile to SharePoint Quick Synchronization”
but they dont run for some reason. Both these jobs are scheduled to run everyday but last time they ran was some date in 2011. When I click on Run Now nothing happens.
I deleted all cache, forms password history everything. Added the site in trusted sites and all. No luck!
User also tried to access the site by logging onto another system but still same issue.
This user recently joined alongwith a few more people. All of them are able to access the site except this particular user. So, a web part or unpublished page cant be the reason, right?
This user is only able to access the home page which is say http://<siteurl:1234> application while the site which this user is not able to access is
http://<siteurl:2345>.
I even tried to give access through sharepoint designer but no luck! Please help!
PS: This may not be relevant but still I'm sharing. Earlier I used to add users in manage user profiles - new profile. But now as soon as the user is added into active directory there profile is getting created automatically. This might be happening due to
active directory and user profile sync but the question is how? Because I dont remember configuring this. And it was not configured earlier too.

Hi,
According to your description, my understanding is that only one user cannot access the site even though he has the right permission.
I recommend to verify the things below:
Check the permission of the user in the site to see if the permission is right.
Is http://<siteurl:2345> a new site collection ? Can the user access other pages except the home page in
http://<siteurl:1234>?
Grant needed permission to the user in the web application to see if the issue still occurs.
Delete the user and re-add the user in AD to see if the issue still occurs.
Check the ULS log for detailed error message.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

I am not able to link my bank account with the store .... So I am not able to download anything from the store plz help

Plz help in liking my account with the apple store Because I am not able to download anything from apple store

Have you called your credit card issuer? They may be able to provide a reason for the declined purchased.
Also, you can only register for and use the App Store in the country your credit card is issued. Be sure you are buying apps from the correct App Store.

Not able to listen Audio from the laptop

Hi ,
I recently bought HP Laptop and the audio for the laptop worked fine till last week.
Suddenly not sure what happened I am not able to listen any audio out from the laptop built-in internal speakers and external headphones as well.
Everything was fine on the machine in the device manager . All the windoes services related to audio are running.
Even the sound Icon on the toolbar when expanded showing green color up and dows indicating that it is playing sound .But Ii am not able to hear anything.
The laptop configuration is as follows :
Windows 8 64 BIT OS.
HP Pavilion G6 Brand.
Any help is much more appreciated.
Regards,
Alapati.
Intel (R) cORE I5 .

Sasi,
There are many different g6's, so that is not the product number. I'd suggest calling in and speaking to a live rep, since you should still be in warranty if you purchased new.
If you live in the US, contact HP Here.
If you are in another part of the world, begin Here.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

BI PUBLISHER : not able to select 'all' from the menu as parameter

Hi ,
I have created a report using a SQL query . i created a list of values using the following sql query :
select EDM_TRD_HDR.TRD_ID as TRD_ID
from MUREXEDM.EDM_TRD_HDR
and selected this in the menu settings in parameters .
i checked on 'can select all ' option and also on 'NULL Values passed' button.
On clicking view , i am able to see the data for the default valu of the parameter. however, when i select 'all ' from the menu , i am just getting the column headings and no data .
please reply if you are aware of this problem.
Also let me know wether we can create a view selector for a BI publisher report and are there any functionalities which can be implemented in answers and not in the publisher.

You've selected 'null value passed' so you need to write the driving query in your data model in a way that will show all values when the parameter is null:
eg
select *
from
your_table
where
(:p_paramter is null or your_column = :p_parameter)
and ...
(assuming not multi select).
With view selector, you can create conditional regions so could mimic something like that. With regards to features they are completely different products - so almost everything.
Regards,
Robert

I am not able to access Itunes from I movie

I cant see or access I tunes from I movie. Nor I photo. I am not able to add music or photos to my movie. What can be happening?

Temporarily disable any security software on the computer and try again.
If it works, contact whomever supports the security software for assistance on configuring it to not interfere with iTunes.

Not able to access schema from a Web Server

I am not successful in using a schema from a web server. I am using j2sdk1.4.2_06, and JDOM-b10. I have been successful in accessing schema using a file path, but not with a web address. The server is Windows Server 2003, I create a virtual directory using IIS under Inetpub.
Let the URL be: http://server/research_schema/client.xsd
This would be accessible only on the intranet.
Here is some XML:
<client xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
 xsi:noNamespaceSchemaLocation="http://server/research_schema/client.xsd">
<execute matlab="false" commit="false" return_server_msg="false">
<t1>
<load_batch_data>
<username>test</username>
<password>test</password>
<database>db</database>
<get_next_batch>true</get_next_batch>
</load_batch_data>
</t1>
</execute>
</client>
Here is the code that sets the parser to be validating, and sets the schema location, I am using JDOM:
builder = new SAXBuilder("org.apache.xerces.parsers.SAXParser", true);
builder.setFeature(
"http://apache.org/xml/features/validation/schema",
true);
builder.setProperty(
 "http://apache.org/xml/properties/schema/external-noNamespaceSchemaLocation",
 "http://server/research_schema/client.xsd");
doc = builder.build(source);The error I get is a JDOMException saying the client element is not found, but I know that the client element is there, after seeing the XML output to
a file from the sender.
I see many exmples on the internet using a URL for the schema location, and it is usually the internet and not just the intranet. So it does work for someone.
I'd appreaciate any help.

Steve, et. al.,
My apologies for using this in lieu of email, but I have been searching and searching for the answer to your questions from last summer concerning the correct method for getting the local xsd file to be correctly accessed from the xml file when using JDOM to parse with validation..
I did not see successful resolution of the thread from last summer, but this one seems closely related and suggests that you were either instructed to give up, or gave up on your own and went to the solution of placing the xsd file on a server.
Maybe I've got my head screwed on wrong, but I, like you, would like to find a successful way to make xml processing work for a JWS-provisioned application the same as it would if I just sent the clients a big jar file and told them to unjar it to some convenient local directory. In that scenario xsi:noNamespaceSchemaLocation = "itsrighthere.xsd" works as expected.
Can anyone tell us what the correct method of specification is in the JWS context?
Thank you.

Employee user not able to access catalogs from EBP

Hello Seniors,
We are implementing SRM 4.0 with scenario SSP and CCM 2.0.
Please note the landscape highlights:
EBP and CCM component are mounted in the same client and same server.
CAT and CES are also on same client.
No XI in picture.
Catalog upload has been done through CSV format only.
Please note the activities I have completed:
Cat_Manager assigned to /CCM/CATALOG_MANAGER role and profile generated.
Did the customizing for CAT
Did the customizing for CSE
Activated the required services
For the service srm_cse set the log on procedure as "log on data required".
Maintained a service user "ccm_user" in anonymous log on data.
Maintained "define external web serices" in SRM img->SRM ->SRM server ->Master data (Here i have a doubt which is explained later)
Intialized CCM with report.
Uploaded schema in the master catalog.
Created supplier ID and catalog.
Uploaded CSV file for Supplier catalog.
Mapped Supplier catalog with master catalog
Published Master cataog.
maintained entry of master catalog in PPOMA_BBP.
Now I logged on EBP home page with employee user.
Went to application shop.
My master catalog published in CCM component was present there with exact name.
But when the employee user clicks on the particular catalog link to choose the items from , He is getting an error "" BSP exception: Access to URL /sap/bc/bsp/ccm/srm_cse is forbidden "".
With this error message immediately the attention goes to the service srm_cse.But there I have maintained a SERVICE user by user ID ccm_user which is existing in SRM SU01.
In the whole customizing explained above I have two weak points which I want to state now:
1. The integrated call structure for my particular master catalog was copied from other catalog.
There i am missing one sr. no. of 70 (ie after 60 , 80 is there).
But all the values for url, ccm-user, password, sap-client, sap language, locale, catalogID are filled correctly with type as per config guide.
Do the parameter names should come exactly as per sequence given in guide(In my case it's not so.)
(If anybody wants to see screenshot for this point pl. give me personal ID.)
2. I had deleted the entry of my particular master catalog from the external web services to correct the error stated in pt. no 1 .
But when i tried to create an entry again with the same ID system gave me an error saying that the said catalog is marked for deletion.
now entry of this particular master catalog is present in table /CCM/D_CTLG_REQ with no x mark in active column.
But my catalog ID is present in external web services.
Can point no. 1 and 2 are reasons of the failure to access the catalogs from EBP?
If it is so then please tell me the procedure to recreate the integrated call structure with same catalog ID.
Please excuse me for the length of the matter , but i have tried to give every relavant detail so that clarity should be max.
Best Regards,
dinesh
[email protected]

Hi Dinesh,
Please see cooments below...
1. The integrated call structure for my particular master catalog was copied from other catalog.
There i am missing one sr. no. of 70 (ie after 60 , 80 is there).
But all the values for url[Adeoye]where did you get your url from? Go to SE80 --> BSP application --> /CCM/SRM_CSE --> Controller -->main.do and check the url, ccm-user, password, sap-client, sap language, locale, catalogID are filled correctly with type as per config guide.
Do the parameter names should come exactly as per sequence given in guide(In my case it's not so.)[Adeoye] Yes i believe this should be in the satated sequence.
(If anybody wants to see screenshot for this point pl. give me personal ID.)
2. I had deleted the entry of my particular master catalog from the external web services to correct the error stated in pt. no 1 .
But when i tried to create an entry again with the same ID system gave me an error saying that the said catalog is marked for deletion. [Adeoye] Save your deletion first, before trying to create it again.
now entry of this particular master catalog is present in table /CCM/D_CTLG_REQ with no x mark in active column.
But my catalog ID is present in external web services.
I also sent you a cookbook to help with this, hope this helps...
BR,
Adeoye

Not able to access database from a remote machine using SQL Server Management Studio

Hi,
I have a DB_BOX with SQL Server 2008 R2 installed. I can access the databases on the local machine using SQL Server Management Studio but it is not accessible from other machines, though the machines are in same domain.
I have remote enabled on SQL Server box, TCP enabled, firewall off. I checked with IP Address too, all SQL Server services are running.
The SQL Server log shows the message
The requested service has been stopped or disabled and is unavailable at this time. The connection has been closed.
I get the below message in SSMS from remote machine.
Details of error message are
===================================
Cannot connect to DB_BOX.
===================================
A connection was successfully established with the server, but then an error occurred during the login process. (provider: TCP Provider, error: 0 - The specified network name is no longer available.) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=64&LinkId=20476
Server Name: DB_BOX
Error Number: 64
Severity: 20
State: 0
Program Location:
   at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
   at System.Data.SqlClient.TdsParserStateObject.ReadSniError(TdsParserStateObject stateObj, UInt32 error)
   at System.Data.SqlClient.TdsParserStateObject.ReadSni(DbAsyncResult asyncResult, TdsParserStateObject stateObj)
   at System.Data.SqlClient.TdsParserStateObject.ReadNetworkPacket()
   at System.Data.SqlClient.TdsParserStateObject.ReadBuffer()
   at System.Data.SqlClient.TdsParserStateObject.ReadByte()
   at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
   at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK)
   at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
   at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
   at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
   at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
   at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
   at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
   at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
   at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
   at System.Data.SqlClient.SqlConnection.Open()
   at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
   at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()

Sorry, missed the message from the errorlog in the original post. You shouldn't have included that big .Net dump that hid the important facts. :-)
My first Google attempt on that message (which I have never seen before) suggests that the TCP Enpoint is stopped, so try this:
ALTER ENDPOINT [TSQL Default TCP]
STATE=STARTED;
Erland Sommarskog, SQL Server MVP, [email protected]
This solves the problem. Thanks...

Not able to access files from Workspace Images and Static files

Hi,
We have just migrated our APEX Application from one server to another.
All the functionality is working fine except the images or files which we are uploading
in
Shared Components -> Static Files
Shared Components -> Images
We are uloading Images in Shared Components -> Images but those are not getting displayed there.
Similarly the files which we are uploaded in Shared Components -> Static Files are not accessible. If we
try to download using download icon its showing blank screen.
I am using some javascript files which i have uploaded into static files, but not able to refer them in page.
Please someone guide us how to resolve the above problem.
Thanks in advance.
Thanks & Regards
Sanjay
Edited by: user11204334 on May 25, 2010 1:35 AM
Edited by: user11204334 on May 25, 2010 3:45 AM

Hello Sanjay,
If you upload any static files such as IMAGES, FILES, or CSS you have to use the tags: #WORKSPACE_IMAGES# or #IMAGE_PREFIX# depending on your files location..
then try something like htp.p ('<img src="#IMAGE_PREFIX#fileName.gif" />');
And it should show the fileName.gif on your browser...
I am not sure if i remember correctly, you can reference files to a specific application or to the whole application, if I am not mistaken..Correct me..
Regards,
Noel Alex Makumuli,
Tanzania

I am not able to install apps from the app store

i am not able to install the appa from the app store... can sumone pls help

Hi...
If you have security software (anti virus) installed, disable that then try downloading and installing apps.
If you do not have a/v software installed, installing the Mac OS X 10.6.8 Update Combo reinstalls the App Store for you which may help. It's ok to do this even though you are already running v10.6.8.
Restart your Mac after the combo is installed, then try the App Store.

Could not able to access workbook from the favorites of User Menu

Similar Messages

Maybe you are looking for