Could not activate cellular data: You are not subscribed to a cellular data service."

could not activate cellular datae you are not subcribled to a cllular data

Have you contacted your carrier to ensure your account is set up correctly?
~Lyssa

Similar Messages

Wndows could not start the SQL Server (MSSQLSERVER) service on Local computer

I have 2 instance of SQL Server in same server. A is installed first and B next.
Somehow A cannot start at all when I try to start from Windows Services.
B can be started normally.
A worked normally week ago. There has been only one thing what I may have to server since that.
I have installed MondoDB. Currently MondoDB it is stopped.
windows could not start the SQL Server (MSSQLSERVER) service on Local computer
Error 31: A device attached to the system is not functioning.
Kenny_I

I don't see anything special in event logs.
Data file of both SQL Server instance are located on same C drive of same server.
Kenny_I
Hello Kenny,
The main issue is not related to SQL server .SQL is at receiving end its hardware or the cables ( not sure which one) are the one causing issue.
I serached
http://social.msdn.microsoft.com/Forums/windowsdesktop/en-US/111da2ae-0a86-41a5-ba03-7d1c0cc91ea9/windows-error-code-31a-device-attached-to-the-system-is-not-functioning-properly?forum=wdk
http://www.chicagotech.net/netforums/viewtopic.php?f=1&t=6467
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Windows could not start the distributed transaction coordinator service on local computer

Dear All,
I'm having an issue starting the DTC service in windows 7 OS. I always got the error message below when im trying to start it.
"Windows could not start the distributed transaction coordinator service on local computer"
Thanks,
Melvin

Hi Melvin,
Please try the following methods to solve this issue:
Method 1: Re-create the MS DTC log, and then restart the service.
Click
Start, type cmd in the search box, and then press
Enter.
Type the command
msdtc -resetlog at the command prompt, and then press
Enter.
Warning: The msdtc -resetlog command can cause data corruption if it is used incorrectly. Make sure that you do not have any pending transactions when you run this
command.
Type the command net start msdtc, and then press
Enter.
Method 2: Set the logon account permissions for the MS DTC service
If Method 1 does not resolve the problem, set the logon account for the MS DTC service to have read and write permissions for the Msdtc.log file. Please follow the steps below:
Click
Start, type cmd in the search box, and then press
Enter.
Type the command
control admintools at the command prompt, and then press
Enter.
Double-click
Services.
In the Services pane, locate
Distributed Transaction Coordinator.
In the
Log On As column, note the account name. Note: The default logon account for the MS DTC service is the NETWORK SERVICE account.
Start Windows Explorer, and
then open the %windir%\System32\Msdtc folder.
Right-click the
Msdtc.log file, and then click Properties.
Click the
Security tab.
Click the logon account name that you noted
in step 5. For example, click the NETWORK SERVICE account name.
In the
Permissions pane, click to select the Allow check box for the following permissions: ◦Read & Execute
◦Read    ◦Write
Click
OK.
Click
Yes to accept the security warning.
In the
Services pane, right-click Distributed Transaction Coordinator, and then click
Start.
Method 3: Assign permissions to the NETWORK service to traverse the directory tree
Determine whether the NETWORK service has permissions to traverse through the folder. To do this, follow these steps.
Note: By default, the "Everyone" group has these permissions. For more information, go to the following Microsoft TechNet website:
Bypass traverse checking
Click
Start, type secpol.msc in the search box, and then press
Enter.
Browse through the following computer configuration:
        \Windows Settings\Security Settings\Local Policies\User Rights Assignment
Check for "Bypass traverse checking," and then add the "Everyone" group.
Update the Group Policy settings on the computer. To do this, click
Start, type gpupdate in the search box, and then press
Enter.
In the
Services pane, right-click Distributed Transaction Coordinator, and then click
Start.
Regards,
Lany Zhang

SPP 4.30 windows could not start the rwd uperform monitoring service

Hi, i just install spp 4.30 with two servers, one for the sql databases, and the other for the search server and vignette.
Windows server 2008. 64 bits
All the installation was ok, but when you try to configure the server it doesn't show the web page.
The rwd uperform monitoring service can not start and send the following error:
Windows could not start the rwd uperform monitoring service error 1067.
Any ideas.
thanks
Edited by: Idel Gorodezky on Jun 26, 2011 3:14 AM

Hi, thanks for the Help, i am sending the logs.
- <Log>
- <Entry Type="Error" Id="f19c1f86-8e6e-4bee-8c18-312e7edb23d2">
<Date>6/27/2011 1:23:09 AM</Date>
<ThreadID>9</ThreadID>
<ErrorCode>24-01-014</ErrorCode>
<RoutineNamespace>RWD.uPerform.CMS.Vignette.VerifyLicense</RoutineNamespace>
<FriendlyMessage>An error occurred while verifying license.</FriendlyMessage>
<Message>The remote server returned an error: (401) Unauthorized.</Message>
<StackTrace>at System.Net.WebClient.DownloadDataInternal(Uri address, WebRequest& request) at System.Net.WebClient.DownloadData(Uri address) at RWD.uPerform.CMS.Vignette.GetBytesFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.GetStringFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.VerifyLicense() at RWD.uPerform.WindowsService.QueueMonitor.VerifyLicense()</StackTrace>
<Parameters />
</Entry>
- <Entry Type="Error" Id="2a9ca666-2f94-4cb0-86e9-62254c21e2ec">
<Date>6/27/2011 5:39:02 AM</Date>
<ThreadID>9</ThreadID>
<ErrorCode>24-01-014</ErrorCode>
<RoutineNamespace>RWD.uPerform.CMS.Vignette.VerifyLicense</RoutineNamespace>
<FriendlyMessage>An error occurred while verifying license.</FriendlyMessage>
<Message>The remote server returned an error: (401) Unauthorized.</Message>
<StackTrace>at System.Net.WebClient.DownloadDataInternal(Uri address, WebRequest& request) at System.Net.WebClient.DownloadData(Uri address) at RWD.uPerform.CMS.Vignette.GetBytesFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.GetStringFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.VerifyLicense() at RWD.uPerform.WindowsService.QueueMonitor.VerifyLicense()</StackTrace>
<Parameters />
</Entry>
- <Entry Type="Error" Id="7c26d18a-fadf-49f1-8f0f-881ea4d33fa0">
<Date>6/27/2011 10:59:44 AM</Date>
<ThreadID>9</ThreadID>
<ErrorCode>24-01-014</ErrorCode>
<RoutineNamespace>RWD.uPerform.CMS.Vignette.VerifyLicense</RoutineNamespace>
<FriendlyMessage>An error occurred while verifying license.</FriendlyMessage>
<Message>The remote server returned an error: (401) Unauthorized.</Message>
<StackTrace>at System.Net.WebClient.DownloadDataInternal(Uri address, WebRequest& request) at System.Net.WebClient.DownloadData(Uri address) at RWD.uPerform.CMS.Vignette.GetBytesFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.GetStringFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.VerifyLicense() at RWD.uPerform.WindowsService.QueueMonitor.VerifyLicense()</StackTrace>
<Parameters />
</Entry>
- <Entry Type="Error" Id="0bd8fe26-8265-4b2e-a192-0b6513eb5ad8">
<Date>6/27/2011 12:01:15 PM</Date>
<ThreadID>9</ThreadID>
<ErrorCode>24-01-014</ErrorCode>
<RoutineNamespace>RWD.uPerform.CMS.Vignette.VerifyLicense</RoutineNamespace>
<FriendlyMessage>An error occurred while verifying license.</FriendlyMessage>
<Message>The remote server returned an error: (401) Unauthorized.</Message>
<StackTrace>at System.Net.WebClient.DownloadDataInternal(Uri address, WebRequest& request) at System.Net.WebClient.DownloadData(Uri address) at RWD.uPerform.CMS.Vignette.GetBytesFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.GetStringFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.VerifyLicense() at RWD.uPerform.WindowsService.QueueMonitor.VerifyLicense()</StackTrace>
<Parameters />
</Entry>
- <Entry Type="Error" Id="b8b0694b-5214-4871-9bc6-b8af11dadf6f">
<Date>6/27/2011 1:06:19 PM</Date>
<ThreadID>9</ThreadID>
<ErrorCode>24-01-014</ErrorCode>
<RoutineNamespace>RWD.uPerform.CMS.Vignette.VerifyLicense</RoutineNamespace>
<FriendlyMessage>An error occurred while verifying license.</FriendlyMessage>
<Message>The remote server returned an error: (401) Unauthorized.</Message>
<StackTrace>at System.Net.WebClient.DownloadDataInternal(Uri address, WebRequest& request) at System.Net.WebClient.DownloadData(Uri address) at RWD.uPerform.CMS.Vignette.GetBytesFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.GetStringFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.VerifyLicense() at RWD.uPerform.WindowsService.QueueMonitor.VerifyLicense()</StackTrace>
<Parameters />
</Entry>
- <Entry Type="Error" Id="370efaa4-1f71-413c-a027-126b31693932">
<Date>6/27/2011 4:17:07 PM</Date>
<ThreadID>9</ThreadID>
<ErrorCode>24-01-014</ErrorCode>
<RoutineNamespace>RWD.uPerform.CMS.Vignette.VerifyLicense</RoutineNamespace>
<FriendlyMessage>An error occurred while verifying license.</FriendlyMessage>
<Message>The remote server returned an error: (401) Unauthorized.</Message>
<StackTrace>at System.Net.WebClient.DownloadDataInternal(Uri address, WebRequest& request) at System.Net.WebClient.DownloadData(Uri address) at RWD.uPerform.CMS.Vignette.GetBytesFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.GetStringFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.VerifyLicense() at RWD.uPerform.WindowsService.QueueMonitor.VerifyLicense()</StackTrace>
<Parameters />
</Entry>
</Log>
<configuration>
<appSettings>
    <add key="DataSource" value="fifcrsppdb01" />
    <add key="Database" value="uperformGlossarydef" />
    <add key="DatabaseEngine" value="SQLserver" />
    <add key="DatabasePort" value="1433" />
    <add key="DatabaseSchema" value="glossaryPublic10" />
    <add key="ConnectionModifier" value=";pooling=false" />
    <add key="DatabasePassword" value="Zn4Od3shJCfR6hrx0ALMNg==" />
    <add key="DatabaseUser" value="glossaryPublic10" />
    <add key="Flags" value="0" />
    <add key="SMTPServer" value="172.16.3.114" />
    <add key="SMTPDomain" value="16.3.114" />
    <add key="HostName" value="FIFCRSPPAP01.ccr.co.cr" />
    <add key="HostPort" value="80" />
    <add key="HostProtocol" value="http" />
    <add key="GlossaryEnabled" value="True" />
    <add key="GlossaryUseRTF" value="True" />
    <add key="GlossaryDefaultLanguage" value="en-US" />
    <add key="VignetteIntegrated" value="True" />
    <add key="InstallLocation" value="C:\Vignette\Collaboration\" />
    <add key="ErrorLog" value="WWW\uPerformWS\logs\ServerErrors.xml" />
    <add key="DataFolder" value="WWW\RWD\Data\" />
    <add key="LibraryStructure" value="en-US_rwdDocLib.xml" />
    <add key="WorkingLocation" value="WWW\uPerformWS\WorkingFolder\" />
    <add key="ErrorMaxSize" value="1000000" />
    <add key="ErrorHistory" value="30" />
    <add key="GlossaryQueue" value=".\private$\GlossaryQueue" />
    <add key="PublishingQueue" value=".\private$\PublishingQueue" />
    <add key="ImportExportQueue" value=".\private$\ImportExportQueue" />
    <add key="ErrorQueue" value=".\private$\ErrorQueue" />
    <add key="UserManagementQueue" value=".\private$\UserManagementQueue" />
    <add key="Transforms" value="WWW\uPerformWS\ms\PublishingData\Base Static\xml\transforms" />
    <add key="CurrentVersion" value="4.30" />
    <add key="TrustAllCertificates" value="True" />
    <add key="WebRequestTimeout" value="600000" />
    <add key="LdapAuthentication" value="ServerBind" />
    <add key="WordtoHTML" value="True" />
    <add key="WordtoPDF" value="True" />
    <add key="PPTtoPDF" value="True" />
    <add key="ExceltoPDF" value="True" />
    <add key="WordtoSource" value="True" />
    <add key="PPTtoSource" value="True" />
    <add key="ExceltoSource" value="True" />
    <add key="PublishedContent" value="WWW\ucontent\" />
    <add key="PublisherConfig" value="WWW\uPerformWS\ms\PublishingData\configuration files\transformation.settings" />
    <add key="Templates" value="WWW\uPerformWS\ms\PublishingData\Base AppData\templates\" />
    <add key="BaseStatic" value="WWW\uPerformWS\ms\PublishingData\Base Static\" />
    <add key="BaseAppData" value="WWW\uPerformWS\ms\PublishingData\Base AppData\" />
    <add key="PensListenerPath" value="WWW\uPerformWS\" />
    <add key="Upgrade" value="WWW\uPerformWS\ms\PublishingData\Upgrade\" />
    <add key="EnableDocSIM" value="True" />
    <add key="EnableDocXHTML" value="True" />
    <add key="EnableDocPDF" value="True" />
    <add key="EnableDocWORD" value="True" />
    <add key="EnableDocPPT" value="True" />
    <add key="EnableCourseSIM" value="True" />
    <add key="EnableCoursePDF" value="True" />
    <add key="EnableCourseWORD" value="True" />
    <add key="EnablePPTXsource" value="True" />
    <add key="EnablePPTXpdf" value="True" />
    <add key="EnableXLSXsource" value="True" />
    <add key="EnableXLSXpdf" value="True" />
    <add key="EnableDOCXsource" value="True" />
    <add key="EnableDOCXhtml" value="True" />
    <add key="EnableDOCXpdf" value="True" />
    <add key="SystemPassword" value="" />
    <add key="IntegrationEnabled" value="False" />
    <add key="IntegrationUserName" value="" />
    <add key="IntegrationPassword" value="" />
    <add key="IntegrationURL" value="" />
    <add key="IntegrationOutgoingPolicy" value="" />
    <add key="IntegrationIncomingPolicy" value="" />
    <add key="PolicyFile" value="WWW\uPerformWS\wse3policyCache.config" />
    <add key="WebRequestQueryString" value="SMSESSION=NO" />
    <add key="SiteMinderCookie" value="SMCHALLENGE" />
    <add key="SiteMinderDomain" value="" />
    <add key="TivoliCookieName" value="" />
    <add key="TivoliCookieDomain" value="" />
    <add key="TivoliWebSEALJunction" value="" />
    <add key="TivoliWebSEALBaseURL" value="" />
    <add key="AuthenticationType" value="Basic" />
    <add key="LDAPTimeout" value="10" />
    <add key="UserPageSize" value="2000" />
</appSettings>
</configuration>

Windows could not start the Network Location Awareness service on Local computer

i have a dell inspiron 1501 laptop running windows vista home premium media center edition. i have recently been getting an error when trying to view networked computer saying "connection status: unknown" and "the dependency service or group failed to start". i started by disabling and re-enabling the driver and that did not help. i then brought up the services.msc thing and started looking at the networking services. i noticed that the Network Location Awareness service was not started so i tried to start it. i got a popup message saying "Windows could not start the Netwrok Location Awareness service on Local Computer. Error 0xc000096: 0xc0000096".
i also get an error popup when i try to start the Network List service saying "Windows could not start the Network List Service service on Local Computer. Error 1068: The dependency service or group failed to start".
what might i have done to make this happen and what can i do to try to fix it?
haus

Hi,
Thank you for the post.
I fully understand the inconvenience the issue has been caused and the current situation can be frustrating. Please try the following steps for troubleshooting.
1. Please start the computer in Safe Mode with Network and check the result. If the issue disappears, please perform a clean boot.
For the detailed steps, please refer to the step 1 and 2 in the KB article 936214 (http://support.microsoft.com/kb/936214).
2. If the issue persists, please check the system file by using the command SFC /scannow.
For more information, please refer to the KB article 929833 (http://support.microsoft.com/kb/929833).
If the above suggestions do not resolve the issue that service fails to start up, please understand that debug and dump analysis may be required for further troubleshooting. Also, in most cases, it is necessary to check the source codes. However, debugging is out of our forum’s support boundary. A support call to our product service team is needed for the debugging service. In this case, I’d like to suggest contacting Microsoft Customer Support Service (CSS) for assistance so that this issue can be resolved efficiently.
To obtain the phone numbers for specific technology request, please check the website listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;PHONENUMBERS
Thank you for your understanding.
Sincerely,
Joson Zhou
Microsoft Online Community Support

Could not generate stub objects for web service invocation in ColdFusion

I was able to call the services on the development box - windows server without any problem at all, everything was working fine but the moment i uploaded to a linux box production server I get this error. "Could not generate stub objects for web service invocation in ColdFusion"
What could be the cause of this problem, i have googled a lot but no solution yet any ideas.

Let me make it simple:
1. Server A is our development server.- hosted inhouse with coldfusion installed.
2. Server B is our production server - a linux server with coldfusion installed hosted on the internet
3. Server C is a third party server containing the webservice - this is a windows server with .net
coldfusion is installed on Server A, the code works here and can connect to server C without any problem. It gets the required respone
but when the code was uploaded to server c it gives the error when we run it.
now i tried just a simple code which works fine on server A below:
<cfinvoke webservice="http://www.webservicex.net/CurrencyConvertor.asmx?WSDL" method="ConversionRate" returnvariable="ConversionRateResult">
    <cfinvokeargument name="FromCurrency" value="EUR" />
    <cfinvokeargument name="ToCurrency" value="USD" />
</cfinvoke>
<cfdump var="#ConversionRateResult#" />
But when i uploaded it to server C: it returns the error
Cannot generate stub objects for web service invocation.
Name: http://www.webservicex.net/CurrencyConvertor.asmx?WSDL. WSDL: http://www.webservicex.net/CurrencyConvertor.asmx?WSDL. java.io.FileNotFoundException: /opt/coldfusion8/stubs/WS728929035/NET/webserviceX/www/Currency.java (No such file or directory) It is recommended that you use a web browser to retrieve and examine the requested WSDL document to ensure it is correct. If the requested WSDL document cannot be retrieved or is dynamically generated, it is likely that the target web service has programming errors.
The error occurred in /home/works/public_html/currency.cfm: line 7
5 :     <cfinvokeargument name="FromCurrency" value="EUR" />
6 :
7 :     <cfinvokeargument name="ToCurrency" value="USD" />
8 :
9 : </cfinvoke>
Now if you try the preceeding code on a windows environment it works fine but the moment you put in the in the linux environment it generates this error
I feel that the error may actually be :
java.io.FileNotFoundException: /opt/coldfusion8/stubs/WS728929035/NET/webserviceX/www/Currency.java (No such file or directory)
but i am clueless as to what to do next
Ok so I tried the wget command on the linux
this is what i got
-bash-3.2# wget http://www.webservicesx.net/CurrencyConvertor.asmx?WDSL
--2011-07-02 23:23:42-- http://www.webservicesx.net/CurrencyConvertor.asmx?WDSL
Resolving www.webservicesx.net... 216.8.179.25
Connecting to www.webservicesx.net|216.8.179.25|:80... connected.
HTTP request sent, awaiting response... 403 Forbidden
2011-07-02 23:23:43 ERROR 403: Forbidden.

I could not find u201CWeb Servicesu201D Node Enterprise Services Browser in CE7

Hi,
I installed CE 7.1 SR 5..Now i want to configure the ESR and Service Registry properties in CE system in the NWDS
For that In NWDS under u201CWindowu201D tab in the main toolbar
I could not find u201CWeb Servicesu201D Node and e u201CEnterprise Services Browser
Please let me know do we want to enable any services to see the prespective (Webservice) in NWDS(CE 7.1 SR5)
Thanks
Chandu

If you cant find under Window -> Preferences -> Web Services -> ESB, are you sure you are using NWDS 7.1 ?
There shouldnt be any services needed.
- julius

Windows could not start block level backup engine service

Hello,
              Im
trying to perform system state backup for one of the server its unable to run. Last week we have performed the system state backup without any issue.
Operating System:2008
OS Version: R2 Small Business Server 2011 x64 Edition Build 7600
RAM-32 GB
Following event ID is reported in the logs;
Log Name:      Application
Source:        Microsoft-Windows-Backup
Date:          7/2/2013 2:25:35 PM
Event ID:      754
Task Category: None
Level:         Information
Keywords:
User:          SYSTEM
Computer:     ABC
The Block Level Backup Engine service has stopped.
When we try to restart the Block Level Backup Engine service we get error as “Windows could not start the Block Level Backup Engine Service on Local Computer.
Error 0x800700b7: Cannot create a file when that file already exists.”
I have already restarted Virtual disk and Volume shadow copy service, but no luck.
Any help in resolving this issue will be much appreciated.
Thank you.
Keshava

All,
Here is the solution which worked for me ;
Services.msc >properties page of Block Level Backup Service Engine
Changed to Log On tab
Instead of Log On as Local System Account changed to Log On as
[email protected] (select the account with admin creds), entered the password of admin and closed the properties page.
Now restart the Block Level Backup Service Engine and re-run the job, backup completes without any issue.
Thank you
Keshava

ITunes could not load dataclass information from sync services

I'm getting this message every time i'm connecting my iPhone with my mac. When i try to sync it i get this message:
iTunes could not backup the iPhone “iPhone” because the backup session failed.
I've tried deleting all my old backups and a manual backup as hinted here but with no luck... any tips?

Re-install iTunes over your current installation from this link:
http://www.apple.com/itunes/download/

"Your Set-Top Box details could not be retrieved" on my TV service page

I just had TV service added yesterday. The DVR works. But when I go to My Services page on Verizon web site (http://www22.verizon.com/ForYourHome/MyAccount/Protected/Services/MyServices.aspx) it shows the box but not activated. After some help from live chat, I got it activated and can access DVR via web.
But after a few hours, the same page now says "Your Set-Top Box details could not be retrieved" and clicking at any of the links like "Record A Show" brings me to the On Demand/FlexView page (https://www36.verizon.com/fiostv/web/members/OnDemandHome.aspx) with no mention of DVR at all.
My FIOS was installed way back and is CAT5 on WAN. The new TV install put in a new Actiontec rev. F and kept the CAT5 WAN since the ONT doesn't have COAX WAN. Everything works inside the home. Just the web access is not working.
Any pointer where I should look?

Mine says that too, but I don't seem to have any problems accessing or programming my DVRs from the Web site.
I also have a CAT5 Ethernet run to the ONT, but I don't think that has anything to do with it.

HT1926 Windows could not start the Apple Mobile Device service on iTunes install

Trying to install the latest update to iTunes on Wind 7 x64 box... Died during installation with error "Service 'Apple Mobile Device' failed to start... havee uninstalled itunes and am running a fresh install as Administrator... Get the same message...
Tried to start the Mobile Device service from computer>manage>services but recieve the error 'Windows could not start the AppleMobile... Error 1053 The service did not respond to the start or conrol request in a timely fashion..
Any ideas??? thanks.............

Hello thezerfi,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/ts1567
Close iTunes and disconnect the iPhone, iPad, or iPod touch.
Click the Windows Start button .
In the Start Search field type Services.
In the Programs section of the search results, Click "Services".
Select Apple Mobile Device and click Stop the service as shown below:
After the service has stopped, click Start the service.
After the Apple Mobile Device service has started again, open iTunes and connect the device.
Best of luck,
Mario

Syncing iPod nano when you are a subscriber to iTunes Match

I have a 4th generation iPod nano. Until a couple weeks ago I always synced it to my iTunes on my computer through a USB cable. But now iTunes no longer recognizes my iPod nano nor does it sync. I subscribed to iTunes Match when I bought my iPhone 4 last year, and have since read that you cannot sync music to your iPod nano if you subscribe to iTunes Match. I had no problem syncing last year, but ever since I renewed my subscription to iTunes Match this year I can no longer sync my iPod. Does anyone know of a workaround? I would hate to have to buy a new cloud friendly iPod when mine still works perfectly fine.

Ok, so I figured out the problem with the help of tech support. I simply had to reboot my device (never have in all the years I've owned it... didn't even know I could!). That solved the problem and now iTunes recognizes my device and I am back to syncing through my USB cable. How to reboot if you are having a similar problem: simply hold the center button and the "menu" button (top of the wheel) at the same time for several seconds until the screen goes blank and the apple logo appears; then let go of the buttons and wait for the device to reboot. It's that easy!

Windows update could not check for updates because the service is not running. You may need to restart your computer.

I restarted my computer but still have this issue.
I changed the setting from "install updates automatically" to "never check for updates". clicked ok and then changed back to "install updates automatically". Tried to check for updates and still receive the same error.
Windows defender was turned off. I turned it on updated it but still receive the same error message.
The background intelligent transfer service and windows update are set to "automatic delayed start" and the status for both is "started".
I'm running windows 7 home premium 64 bit
I ran the MGADIAG tool and here is the report (windows tab)
Diagnostic Report (1.9.0027.0):
Windows Validation Data-->
Validation Code: 0
Cached Online Validation Code: 0x0
Windows Product Key: *****-*****-QCPVQ-KHRB8-RMV82
Windows Product Key Hash: +Rj3N34NLM2JqoBO/OzgzTZXgbY=
Windows Product ID: 00359-OEM-8992687-00095
Windows Product ID Type: 2
Windows License Type: OEM SLP
Windows OS version: 6.1.7601.2.00010300.1.0.003
ID: {22D605EF-8B21-4E2C-A111-AC15534A1805}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Home Premium
Architecture: 0x00000009
Build lab: 7601.win7sp1_gdr.130318-1533
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002
OGA Data-->
Office Status: 100 Genuine
Microsoft Office Enterprise 2007 - 100 Genuine
Microsoft Office Project Professional 2007 - 100 Genuine
Microsoft Office Visio Professional 2007 - 100 Genuine
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_E2AD56EA-765-b01a_E2AD56EA-766-0_E2AD56EA-148-80004005_16E0B333-89-80004005_B4D0AA8B-1029-80004005
Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: C:\Program Files (x86)\Mozilla Firefox\firefox.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed
File Scan Data-->
Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{22D605EF-8B21-4E2C-A111-AC15534A1805}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010300.1.0.003</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-RMV82</PKey><PID>00359-OEM-8992687-00095</PID><PIDType>2</PIDType><SID>S-1-5-21-3546321622-335202686-625851561</SID><SYSTEM><Manufacturer>Dell
Inc.</Manufacturer><Model>Inspiron 1545                   </Model></SYSTEM><BIOS><Manufacturer>Dell Inc.</Manufacturer><Version>A14</Version><SMBIOSVersion
major="2" minor="4"/><Date>20091207000000.000000+000</Date></BIOS><HWID>A27B3407018400F8</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Eastern Standard
Time(GMT-05:00)</TimeZone><iJoin>0</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM><OEMID>DELL </OEMID><OEMTableID>WN09
</OEMTableID></OEM><GANotification/></MachineData><Software><Office><Result>100</Result><Products><Product GUID="{90120000-0030-0000-0000-0000000FF1CE}"><LegitResult>100</LegitResult><Name>Microsoft
Office Enterprise 2007</Name><Ver>12</Ver><Val>64BC76978749586</Val><Hash>GW6PzcEVEDTVKeO5Ym5UUm41dBk=</Hash><Pid>89388-707-0441865-65517</Pid><PidType>14</PidType></Product><Product
GUID="{90120000-003B-0000-0000-0000000FF1CE}"><LegitResult>100</LegitResult><Name>Microsoft Office Project Professional 2007</Name><Ver>12</Ver><Val>3AB862DE70D8D86</Val><Hash>UfpXsJvSSVcPufbDdjd0NK73+ug=</Hash><Pid>89403-707-4159871-63552</Pid><PidType>14</PidType></Product><Product
GUID="{90120000-0051-0000-0000-0000000FF1CE}"><LegitResult>100</LegitResult><Name>Microsoft Office Visio Professional 2007</Name><Ver>12</Ver><Val>3AB862DE70D8D86</Val><Hash>UfpXsJvSSVcPufbDdjd0NK73+ug=</Hash><Pid>89405-707-4159871-63071</Pid><PidType>14</PidType></Product></Products><Applications><App
Id="15" Version="12" Result="100"/><App Id="16" Version="12" Result="100"/><App Id="18" Version="12" Result="100"/><App Id="19" Version="12"
Result="100"/><App Id="1A" Version="12" Result="100"/><App Id="1B" Version="12" Result="100"/><App Id="3A" Version="12" Result="100"/><App
Id="44" Version="12" Result="100"/><App Id="53" Version="12" Result="100"/><App Id="A1" Version="12" Result="100"/><App Id="BA" Version="12"
Result="100"/></Applications></Office></Software></GenuineResults>
Spsys.log Content: 0x80070002
Licensing Data-->
Software licensing service version: 6.1.7601.17514
Name: Windows(R) 7, HomePremium edition
Description: Windows Operating System - Windows(R) 7, OEM_SLP channel
Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00359-00178-926-800095-02-1033-7600.0000-3562012
Installation ID: 013283726900825816725312972325821572457642476266069113
Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial Product Key: RMV82
License Status: Licensed
Remaining Windows rearm count: 4
Trusted time: 2/27/2014 11:12:34 AM
Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: 0x00000000
HealthStatus: 0x0000000000000000
Event Time Stamp: 12:25:2013 15:59
ActiveX: Registered, Version: 7.1.7600.16395
Admin Service: Registered, Version: 7.1.7600.16395
HealthStatus Bitmask Output:
HWID Data-->
HWID Hash Current: LgAAAAEAAQABAAIAAAABAAAAAgABAAEA6GFwuHZK2jMchnYOKB9UbZombj1Gyg==
OEM Activation 1.0 Data-->
N/A
OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: yes
Windows marker version: 0x20001
OEMID and OEMTableID Consistent: yes
BIOS Information:
ACPI Table Name   OEMID Value   OEMTableID Value
APIC           DELL         WN09
FACP           DELL         WN09
HPET           DELL         WN09
MCFG           DELL         WN09
SLIC           DELL         WN09
SSDT           PmRef       CpuPm
I also ran the following commands in an elevated command prompt
NET START BITS
NET START WUAUSERV
SC QUERYEX BITS
SC QUERYEX WUAUSERV
Here is the result
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>NET START BITS
The requested service has already been started.
More help is available by typing NET HELPMSG 2182.
C:\Windows\system32>NET START WUAUSERV
The requested service has already been started.
More help is available by typing NET HELPMSG 2182.
C:\Windows\system32>SC QUERYEX BITS
SERVICE_NAME: BITS
        TYPE               : 20 WIN32_SHARE_PROCESS
        STATE              : 4 RUNNING
                                (STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN)
        WIN32_EXIT_CODE    : 0 (0x0)
        SERVICE_EXIT_CODE : 0 (0x0)
        CHECKPOINT         : 0x0
        WAIT_HINT          : 0x0
        PID                : 400
        FLAGS              :
C:\Windows\system32>
C:\Windows\system32>SC QUERYEX WUAUSERV
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>NET START BITS
The requested service has already been started.
More help is available by typing NET HELPMSG 2182.
C:\Windows\system32>NET START WUAUSERV
The requested service has already been started.
More help is available by typing NET HELPMSG 2182.
C:\Windows\system32>SC QUERYEX BITS
SERVICE_NAME: BITS
        TYPE               : 20 WIN32_SHARE_PROCESS
        STATE              : 4 RUNNING
                                (STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN)
        WIN32_EXIT_CODE    : 0 (0x0)
        SERVICE_EXIT_CODE : 0 (0x0)
        CHECKPOINT         : 0x0
        WAIT_HINT          : 0x0
        PID                : 400
        FLAGS              :
C:\Windows\system32>
C:\Windows\system32>SC QUERYEX WUAUSERV
SERVICE_NAME: WUAUSERV
        TYPE               : 20 WIN32_SHARE_PROCESS
        STATE              : 4 RUNNING
                                (STOPPABLE, NOT_PAUSABLE, ACCEPTS_PRESHUTDOWN)
        WIN32_EXIT_CODE    : 0 (0x0)
        SERVICE_EXIT_CODE : 0 (0x0)
        CHECKPOINT         : 0x0
        WAIT_HINT          : 0x0
        PID                : 400
        FLAGS              :
C:\Windows\system32>
I can't remember the last time updater worked correctly but it's been a really long time.
Thanks for any help you can provide

Hi,
Please try this
Stop Windows Update Service and BIT Service now.
Go to C:\Windows\SoftwareDistribution and delete all file under this folder.
Start Windows Update and BIT service now.
Then try to download windows update now.
If doesn't work, please reset the windows update componments
http://support.microsoft.com/kb/971058/en-us
Yolanda Zhu
TechNet Community Support

Intermittent Could not generate stub objects for web service invocation errors

Hi,
I'm hoping someone can point me in the right direction...We are running Coldfusion 8 and keep getting the stub objects errors intermittently. The web service will work for a while then it will just stop working for while, then it will start back working again. There doesn't seem to be any rhyme or reason to it, and we're not doing anything to the server in the meantime. I don't even know how to begin to diagnose the problem. Has anyone ever seen this or have any ideas of some things we can check?
Thanks!
Holli

It's a load-balanced environment and we've turned the bad server off for now. Also, I was wrong. We're running CF7. I'm getting my environments mixed up. Sorry about that. You can still get to the service on the good server though. This is the link: http://www.asthmaagents.com/services/init.cfc?WSDL After I posted this, we were able to get a little more info. When I went directly to the service using that link, we got this error message off and on when we would refresh the browser:
AXIS error
Sorry, something seems to have gone wrong... here are the details:
Fault - Error attempting to create Java skeleton for CFC web service; nested exception is:
    coldfusion.xml.rpc.CFCInvocationException: [java.lang.NoClassDefFoundError : cfinit2ecfc338058839$funcRECORDSESSION]
AxisFault
faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.generalException
faultSubcode:
faultString: Error attempting to create Java skeleton for CFC web service; nested exception is:
    coldfusion.xml.rpc.CFCInvocationException: [java.lang.NoClassDefFoundError : cfinit2ecfc338058839$funcRECORDSESSION]
faultActor:
faultNode:
faultDetail:
    {http://xml.apache.org/axis/}hostname:corpinternet1g
Still, nothing is consistent and it's working fine on the other server. I'm at a loss. I really appreciate you taking a look at this! Any info will be helpful.
Thanks!
Holli

Changed setting to no proxy but not solved problem Proxy Error The proxy server received an invalid response from an upstream server. The proxy server could not handle the request GET /iam/services/setContext. Reason: Error reading from remote server

This problem only happens with one website when I try to follow hyperlinks to other pages. They have directed me to Firefox troubleshooting section. I have followed the advice there but it has not solved my problem.

I haven't been able to go on line since 7.01 and up. I have to use ieexplorer. are you idiots or what. I can't even contact you because i have to be in your latest version but i can't get the internet with the latest version. good bye for good

Could this be the Galaxy you are looking for?

Samsung Galaxy S II LTE...
http://www.gottabemobile.com/2011/08/26/samsung-to-unveil-lte-galaxy-s-ii-and-lte-galaxy-tab-8-9-next-week/
Scroll down past the paragraph about the tablet and read about the phone...This phone is NOT part of the trio shown (or to be shown when the winds die down)...
This would be cool, if it comes to pass (and Verizon)...
Geri O

Clicking on the "name" column in any Finder list view will sort by name. Also, make sure you're not looking at the "All My Files" shortcut which is (in my opinion) confusing to many people and doesn't tell you where the files actually live.
Matt

Could not activate cellular data: You are not subscribed to a cellular data service."

Similar Messages

Maybe you are looking for