Could not activate MI usage type

Hi all,
On our Netweaver 70 system I have deployed:
-NWMADMIN
-NWMDRIVERS
-NWMCLIENT
-NWMWDLAP
Functionally the MI seems to work OK. However when I deploy something with JSPM I get the following messages:
23.10.2008 07:49:10.574 INFO     Detecting components of the J2EE engine has finished.
23.10.2008 07:49:10.574 INFO     Activating any new usage types...
23.10.2008 07:49:10.575 INFO     Activating usage type sap.com/MI as all of its components are deployed.
23.10.2008 07:49:10.686 ERROR    com.sap.sl.ut.infoprovider.exceptions.UTInfoException: The SQL Statement is wrong : SELECT * FROM BC_SL_PARTS LEFT OUTER JO
IN BC_SL_ACTIVE_PARTS ON BC_SL_PARTS.PRODUCT_CODE=BC_SL_ACTIVE_PARTS.PRODUCT_CODE AND NAME=PART_NAME AND VENDOR=PART_VENDOR WHERE BC_SL_PARTS.PRODUCT_CODE =
? AND NAME = ? AND VENDOR = ?  ORDER BY LIST_ORDER
23.10.2008 07:49:10.688 ERROR    Could not activate usage type sap.com/MI.
23.10.2008 07:49:10.689 ERROR    com.sap.sdt.jspm.deployment.usages.UsageControllerException: Could not activate necessary usage types.
Could not activate usage type sap.com/MI.
com.sap.sl.ut.infoprovider.exceptions.UTInfoException: The SQL Statement is wrong : SELECT * FROM BC_SL_PARTS LEFT OUTER JOIN BC_SL_ACTIVE_PARTS ON BC_SL_PAR
TS.PRODUCT_CODE=BC_SL_ACTIVE_PARTS.PRODUCT_CODE AND NAME=PART_NAME AND VENDOR=PART_VENDOR WHERE BC_SL_PARTS.PRODUCT_CODE = ? AND NAME = ? AND VENDOR = ?  ORD
ER BY LIST_ORDER
When I look at http://<hostname>:50000/utl/UsageTypesInfo I indeed see the MI usage type not to be installed.
Does anyone know what is going wrong?
Thanks.
Regards,
Bart

Hi Oliver,
Yes, the JCO, SLD, etc.. have been setup OK. In addition, from a functional perspective everything works.
Do you think an undeploy/re-deploy could solve the problem? And will I be loosing MI data then?
Thanks,
Regards,
Bart

Similar Messages

  • HT4623 Could not activate cellular data network. You are not subscribed to a cellular data service" "Cellular Data Plan Usage-There is no data remaining on your current plan. Would you like to add more data now?"what is the best thing i can do with this p

    Could not activate cellular data network. You are not subscribed to a cellular data service"
    "Cellular Data Plan Usage…There is no data remaining on your current plan. Would you like to add more data now?"what im going to do whit this problem??

    I have done that and it is definitely on.  My husband has the exact same phone and I upgraded his IOS at the same time, but this problem is not happening to his phone (we are also on the same plan, so our service should be the same).  Our settings appear to be identical and my phone is showing the 3G symbol at the top, so I can't understand why it won't access the network.
    I've turned it on and off twice and have reset all settings with my iTunes account, but it still isn't working.
    I'm not a complete idiot with this sort of stuff - I have tried all the obvious things.

  • Could not activate Cellular Network - Iphone 2.2.1

    Bought an unlocked (italian) 3G iphone to use in UK. All works well except that it will not connect to internet or mail without wifi connection. Using Orange SIM I have set APN ot orangeinternet and it still won;t work. Have tried resetting <networks> under Settings General. I have a nice little E sign next full bars of signal but it still refuses to connect giving me the message "Could not activate Cellular Network" I now the SIM works as it is fine in my Blackberry and Orange have confirmed it is 2G!
    Any Help much appreciated? Or should I just EBAY the phone and go back to the Blackberry?!

    The answer to this is now straightforward, thanks for everyone's help - it all finally added. Apple Genius Bar were almost a wasted trip, barely made the effort to look up from the Imac! but i did establish that the phone works when we tried using his O2 sim in the phone.
    The 3G SIM i have is 'provisioned' for blackberry - apparently this cannot be reversed or undone (but to be honest I don;t believe Orange). It seems that the phones will work with the correct APN (in this case <orangeinternet>, <user>, <pass>). I bought a 3G pay as you go SIM and it works fine. To get round this i need a new SIM and guess what... orange won't let me have one. However, they will upgrade me next week with a new 3G phone with a 3G sim - so i will put the SIm in the Iphone and EBAY the new phone. How daft is that when a simple SIM will do what i need.?
    So solution - check your current sim isn't provisioned for a particular type of phone - if it is they have you by the short n curlies. Revise your APN and use the links in this thread to establish the correct GRPS settings.
    The most painful part of this is as ever, Customer Service - Both Apple and Orange are painful and do exactly the opposite of what it says on the tin.
    Apple are creating real issues by trying to control a free market - locking down phones to regional providers is simply unrealistic and as soon as they realise that this does more ill will to their brand the better.
    Wonder if they ever read any of this stuff!
    Thanks to all

  • I cannot connect to the net using 3G, i have ipad2 16GB, i have tried resetting my ipad2, and resetting the network setting, my location is here in riyadh, everitime i try to connect to the net theres a pop message saying "could not activate cellular data

    i cannot connect to the net using 3G, i have ipad2 16GB, i have tried resetting my ipad2, and resetting the network setting, my location is here in riyadh, everitime i try to connect to the net theres a pop message saying "could not activate cellular data network, please help me guys thanks.....

    Thanks for the quick response. No, I did not get any error messages or any terms-of-usage screen. The employee I told my problem to was not computer savvy either. She just suggested I move to different spots w/in the library to see if that would make a difference. It didn't. When I connected to the library WiFi it did change the Verizon 3G that is usually in the upper left corner to iPad with two to three emanating arcs. I may have to go to the library in the next town. I was able to connect to theirs in the past when I had to download something greater than 20 MB. Unless I really want it, I will probably not even try to download something more than 20 MB due to the hassle. Yeah, I may have been better off getting a normal desktop or laptop and getting WiFi at home. To do that now would mean having my iPad 2 and a desktop computer, which I feel is extravagant. (I know there are a lot of big spenders out there who got the iPad as additional gadget for fun. This is a rich country.) A Verizon rep told me I couldn't set up a WiFi router at home just using an iPad. So it seems like a person who just uses 3G is limited to surfing the net (not even much YouTube because it eats a lot of data) and using email. I read about an app that helps print wirelessly using 3G, but a reviewer said you had to be an engineer to get it done right. BTW, I like the Steelers. I'm old enough to remember Franco Harris and that blond guy whose name escapes me back in the '70s. Since I live in North Jersey I feel I have to support the Giants. But I know football about as well as computers.

  • Could not found any usage key in the work center WC001(Use T-CODE CR02)?

    my question:
    (1) I have created one Work Center WC001 and one Plant HJW1.
    (2) I have created one Routing with T-CODE CA01.
    (3) Then I use T-CODE CA02 to change this Routing.
    (4) When I enter the Head details screen,I click the Operations button to enter the Operations Overview screen.
    (5) In the Operations Overview screen list,I input the Work Center WC001 and the Plant HJW1 at the first line and press enter.Then the sap raise error message like below.
    (6) The question was: I could not found any usage key in the work center WC001(Use T-CODE CR02)! Could any one tell me the answer or give me some advice to resolve the problem?Thank you so much.
    error message:
    Work center WC001 plant HJW1 does not exist for task list type N
    Message no. CR084
    Diagnosis
    You want to allocate the work center WC001 to a task list of the type N . However this work center is not intended to be used in a task list of the type N.
    Procedure
    The usage of a work center in task lists is restricted via the usage key. You define this key in work center customizing and allocate to it those task list types in which a work center with this usage key can be used.
    Proceed as follows:
    Check the usage key for the work center WC001 in work center maintenance.
    If necessary change the usage key in the work center or change the allocation of task list types to the usage key in customizing or
    allocate to the task list a work center which is valid for use in a task list of the type N.

    Hi
    1) Check what task list usage key you entered for the work center in the basic data . If it is 009 then the work center can be used in all task list type.
    2) If you have defined and used any other usage key , ensure that  for this key , the routing type N is allowed in OP45.
    Regards,
    Ramasamy

  • My iphone is stuck in a state of "could not activate this iPhone"...

    I've had the iOS 7 bet for as long as its been out, and it automatically updated to the full OS when that was released, and now, last night it just interrupted my usage, and brought me to a screen prompting me to "activate this iphone" and whenever I sign in and click "activate this iphone" nothing happens, than after a few minutes it says "could not activate this iphone"...
    Someone please help me. I also tried using itunes to activate it, but it says its fully updated. And I cant even restore it: because it says I must first "turn off findmyiphone in the settings on my phone" but those settings are unreachable. someone. please. help. I'm gonna try to dfu it and see if i can restore it after that if no one responds soon enough... thanks guys!

    Hello, iDsciple.
    Here is an article I would recommend when experiencing issues activating a device.  The step referring to recovery mode usually resolves the issue.
    iPhone: Troubleshooting activation issues
    http://support.apple.com/kb/TS3424
    To retrieve your data, you will need to restore from backup after processing these steps.  Here is the article that walks you through restoring from either your iCloud or iTunes backup.
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    Cheers,
    Jason H.

  • Sir..i restored my iphone 4 ..n at activation time it needs icloud id .. when i enter my apple id it says this id could not activate this iphone

    sir i entered my icloud id when i want to activate my iphone..
    i am **** sure that id i am entering in iphone is correct..
    still iphone says this id could not activate this iphone...
    i disable find my iphone and deleted icloud from iphone before restoring it.
    so according to terms and conditions iphone can not ask me for apple id to activate ..
    please reply soon..
    this problem is making me mad.. i cant do my work without iphone.. contact asap...

    Sometimes it happens when phone is not connected to Internet. If it is not - try connect to itunes on the computer and activate again. If it is - good luck and advice to reset password.

  • Could not activate my iphone 3gs after activating to ios:5, could not activate my iphone 3gs after activating to ios:5

    could not activate my iphone 3gs after activating to ios:5, could not activate my iphone 3gs after activating to ios:5
    its workin with previous version of 3 os n after updatin,its showing that cannot connect to apple server n try connceting to i tunes,after doin so its showin that no sim card inserted.........i have read the similar problem in the discussions but in end of discussion the solution have been removed.............
    and i dont have  a proper apple store or service in coastal india near by...............
    plz do a needfull help as i have only option in contacting you
    plz look forward my request

    touch me wrote:
    it says ICCID: unknown
    Not a good sign. Try forcing the phone into recovery mode & restoring it. If this fails, make an appointment at an Apple store:
    Turn your phone off. Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.

  • HT4972 i could not activate my iphone 3gs after update to 5.1.1

    Hello.. I just update my iphone 3gs 4.1 to 5.1.1. after i update it. it shows COULD NOT ACTIVATE IPHONE.. thanks

    Do you have a Sim card from the carrier the iPhone is locked to in the iPhone's sim card slot?  Without one, you cannot activate the iPhone.

  • I could not activate my iphone 3gs after update to 5.1.1

    hi i could not activate my iphone 3gs 32gb after update to 5.1.1  i m try 25 time  but not activate please can u help me thanks

    Very unlikely anyone here can help you as you've provided absolutely no information for us to even remotely try and help.

  • HT1414 how can i activate my iphone 3gs after upgrading to ios6? it could not activate....

    how can i activate my iphone 3gs after upgrading to ios6? it could not activate....

    If your phone was previously hacked to unlock it, when you updated the hack was removed and it's re-locked to the original carrier.  The phone will now activate and operate only with that original carrier.

  • HT201328 after unlocking from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this . Any ideas?? TKS Sandro

    after unlocking over the phone from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this .
    Itunes displays a message saying "there is no SIM installed in the phone you're trying to activate" even if there is the same SIM that was working minutes before.
    The SIM works on a different phone I tested it.
    Any ideas?? TKS Sandro

    “Could Not Activate EDGE” error message Update ...
    Well it’s going on day 6 and still sporadic to no EDGE on my iPhone. At one time, it was thought to be a defective iPhone – since my partner’s iPhone works just fine.
    After over three hours on the land line with AT&T and Apple, I was sent to the local Apple store for a replacement. Of course, as soon as I walked into the Apple store my iPhone worked just fine. ;-( The local store replaced my iPhone and suggested I go home and activate the phone as a NEW iPhone, that way if there was a bug in my data it would not carry over to the new phone. Did that and well… still sporadic to no EDGE. By the way, I have the Big White “E” to the right of the 5 bars and AT&T .
    AT&T said last week they has “Software” issues in my area, but the CSR I talked to did not know what the issues were or if they were the cause of my problems. He did say they would call me back today to see how my iPhone was doing, but alas, no call back.
    When I’m next to my partner, trying to access the same feature, his iPhone is just so fast. Mine hangs up, draws out and finally I get the error message, “Could Not Activate EDGE”. I am updated to version “1.1.4(4A102)”. New (refurbished) iPhone direct from Apple.
    I remember reading a while back about some problems others had when they upgraded to from 1.1.3 to 1.1.4. I never had those problems, but it sure looks like they may have started. Does anyone remember what the problems with 1.1.4 were, what was done if anything to correct them, and best of all any suggestions?
    By the way, this is Seattle, not some small – out of the way place where connection and signal strength is expected to be second rate. Also, I had full function of my iPhone from the day I bought it in June 2007, all the way up to Thursday March 20, at 2120.
    Thanks
    Joe

  • On a new setup I get error message "'could not activate this table (3001)''

    Hi,
    I am busy setting up my new playbook and get an error message on the software update screen: "'could not activate this table (3001)'' please try changing your settings.
    What settings am I meant to change?
    There is a button for settings and when I press this, the playbook takes me back to the connect to WI-FI screen. The WI-FI screen shows that I am currently connected. When I click on hotspot setup, the screen comes back and says I am already connected to the internet.
    Can anybody please assist me to complete my setup so that I can start using the playbook?
    Looking forward to your feedback
    Thanks a stax

    Or, you can find a local UNsecured hotspot not requiring a login or password. Like a McDonalds.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Could not create task or type of type: validateTask

    While writing a master Ant script which calls the build.xml of individual BPEL processes, the following exception is thrown.
    validateTask:
    [echo]
    [echo] -------------------------------------------------------------
    [echo] | Validating workflow
    [echo] -------------------------------------------------------------
    [echo]
    <process name>: The following error occurred while executing this line:
    <build file>:210: The following error occurred while executing this line:
    <build file>:49: Could not create task or type of type: validateTask.
    Ant could not find the task or a class this task relies upon.
    I have tried the following options;
    1.) The same build.xml is successfully compiled when executed from JDeveloper
    2.) Both Ant versions are one and the same (Apache Ant 1.7.0)
    3.) Oracle_home points to the SOA installation folder
    4.) Appropriate classpath is set
    I am unable to drill down on this issue further. Is there any small setting (like additional classpaths, oracle_home etc..) that I am missing out here? or is there a jar file that is required by the external Ant builder to execute the <validateTask> and other custom bpel ant tasks?
    Any help would be greatly appreciated.
    Thanks!
    Regards,
    Sathya

    Hi James,
    Let me clear this again. Whenever i try to compile the build.xml of a BPEL process in JDeveloper IDE, I am able to do so without any issues. However, when i try to execute or call the build.xml from a command prompt, I am facing the following error. The "validateTask" ant task is the first task and I dont think that has anything to do with the connection settings as this task will get executed the first in any BPEL process even before <bpelc> (Compilation) or <deployProcess> (deployment) tasks.
    I think I am missing some classpath/libraries/ant settings required for calling the build.xml externally.
    Any help would be greatly appreciated. Thanks!
    Regards,
    Sathya

  • HT4623 My new iPad can no longer connect to the 3G network. I keep getting the message "could not activate cellular date network".

    I updated my new iPad to the iOS 6 while connected to wifi. However, it will no longer connect to the 3G network. I keep getting the message "could not activate cellular data network" even though the 3G symbol appears normal. I have tried rebooting, but it still doesn't work. Please help!

    No. You can't

Maybe you are looking for