Could not add a database field in the new PLD report..
Hi All,
Am working on a PLD report and am not able to add a Databse field on the Report.
I want to add a new field on my Report which should fetch the Field Tax Amount from the table AR invoice tax amount per document....
when i add the new database field the drop down for tables does not display the desired table....
Can any one help me on this....
Thanx in advance
Manish Chaudhary
Hello,
here is some thread links relate to your problem :
1. Detail of all tax codes and tax amounts in A/R Invoice PLD
2. Calculate Tax breakup in PLD
Rgds,
Similar Messages
-
How to add a function field into the existing matrix report
Hi,
I have a matrix report , now i wanted to add one moe field into the matrix which is getting the value from a function , this function is a part of the ref cursor query(group) , i'm able to get the value from the function but it cannot display on the existing matrix report. i wanted to add this in the repeating frame which is printing down. how could i do this , looking for your help. thanks . bcjHere the scenario like,
Data from Table_1
NAME UNITS DAYS RATE
AAA 10 1 1.2
BBB 12 2 3.1
AAA 20 2 4.1
CCC 23 1 5.2
Here, In the matrix report the NAME and UNITS are row fields and 'DAYS' is column field , RATE would be the cell field, and
Data from Table_2 ,
NAME BASIC
AAA 2
AAA 2
BBB 2
CCC 3
In the report i have to display the 'BASIC' along with the NAME in row level ( repeating frame printing down),
To get the multiple 'Basic' for each 'Name' using a ref cursor .
and, using a function to do further calculation based on the basic value
begin
select basic into v_basic where name =:name;
return(caluculated_value);
end;
and return the calculated value to the report. But at that time cannot accommodate the value in the matrix report with other groups frequency.
looking for your valuable help. Thanks Bcj -
Timesheet could not add task from existing project task assignment
HI there,
I tried to add a task in Timesheet (PWA2013) from an existing assignment. However, there is no task listed under the project when I open the dialog "Add an existing task". It only shows me the project name, I click it, nothing under the project.
Due to this issue, I could not add any existing task into the timesheet.Please look at the screenshot. The "test project" is the project name, while no any task under this project.
Any help is appreciated!
CindyHi Cindy,
Indeed if you cannot access the server setting from the quick launch menu in the left part of PWA, you have to request administrator rights to your admin.
I would add an important comment : in PWA2013, the "close to update" PWA2010 feature no longer exists and has been replace by the "lock" feature, which works basically the same.
To unlock tasks in PWA2013,
go to server setting, manage views,
choose a project view,
insert the "lock" column,
go to the project center,
check out your project schedule,
select the view you just modified,
change the value in the lock field for the given task,
publish the project
Read this post here: http://social.technet.microsoft.com/Forums/projectserver/en-US/28d4914d-5a80-4638-8153-94155a7d43fe/locked-feature-not-working-in-pwa-2013?forum=projectserver2010general
And this article: http://epmsource.com/2012/10/31/where-has-close-tasks-to-update-gone-in-project-server-2013/
Then it should be ok.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS -
UDS 4.0 once again: Could not add "DB11.DBB6" to the response list.
Hi,
once again we have heavy trouble with UDS 4.0 connecting to a SINUMERIK OPC server.
Unfortunately the OPC server does not support browsing. GroupList and TagList returns nothing.
The facts:
- MII 12 on Windows Server 2003
- UDS 4.0 SP1 on same server.
- OPC connectivity has been tested with Matrikon Explorer. Tag has been added manually (remember, browsing not possible).
- Creating UDS instance works. UDS can see remote OPC server and is able to create an instance from it.
- Data server has been created in MII 12 to connect to UDS.
- Connection status to UDS is ok. Can also be seen as Debug file shows query details.
- TagQuery has been created with adding the tag manually (browsing not possible).
When we try to test the query we always get the error message
Could not add "DB11.DBB6" to the response list.
and
No Tag selected
The strange thing ist that, if we use a non existing tag like "test123" then the same error occurrs instead of "No valid tags requested".
Here you can find the debug file of UDS:
[05/14/2008-10:56:18.889] focketest [P:4000, T:2212, Host, INFO] 0x11201 Host is exiting. [Host.cpp @ 338, CHostModule::RunMessageLoop]
[05/14/2008-10:56:19.030] focketest [P:4000, T:2556, UDS, INFO] 0x2028 Disconnected from the server. [Connection.cpp @ 2224, CLHOpcDaConnection::Unload]
[05/14/2008-10:56:40.341] focketest [P:2532, T:1236, Host, SYSTEM] 0x11400 Command Line: "C:\Programme\SAP\xMII\UDS\xMIIUDSHost.exe" test. [Host.cpp @ 433, CHostModule::LogConfig]
[05/14/2008-10:56:40.341] focketest [P:2532, T:1236, Host, SYSTEM] 0x11405 Host Build Configuration: Release. [Host.cpp @ 436, CHostModule::LogConfig]
[05/14/2008-10:56:40.341] focketest [P:2532, T:1236, Host, SYSTEM] 0x11406 Host Build Date: Dec 11 2007. [Host.cpp @ 437, CHostModule::LogConfig]
[05/14/2008-10:56:40.341] focketest [P:2532, T:1236, Host, SYSTEM] 0x11407 Host Description: xMII UDS Host. [Host.cpp @ 438, CHostModule::LogConfig]
[05/14/2008-10:56:40.341] focketest [P:2532, T:1236, Host, SYSTEM] 0x11408 Host File: xMIIUDSHost.exe. [Host.cpp @ 439, CHostModule::LogConfig]
[05/14/2008-10:56:40.341] focketest [P:2532, T:1236, Host, SYSTEM] 0x11409 Host Version: 4.0.3.10. [Host.cpp @ 440, CHostModule::LogConfig]
[05/14/2008-10:56:40.341] focketest [P:2532, T:1236, Host, SYSTEM] 0x11401 Found Aspect: OPC-DA. [Host.cpp @ 468, CHostModule::LogConfig]
[05/14/2008-10:56:40.341] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Include Quality = No. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.341] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Acquisition Mode = Synchronous. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.341] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Read From Device = true. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.341] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Read Delay = 100. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.341] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Force flat namespace = false. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.341] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Automatically Reconnect = true. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.341] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: OPC Group Number = 1234. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.341] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: OPC Group Name = LHDS_OPCGROUP. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.341] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Acceptable Data Quality = Good. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.341] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Startup Delay = 1000. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Use Legacy Tag Format = false. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Legacy Delimiter = .. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Activate Items = Both. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Group Update Rate = 0. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: OPC Server = 192.168.0.1; OPC.SINUMERIK.Machineswitch; OPC DA2. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11401 Found Aspect: Cache. [Host.cpp @ 468, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Mode = Cache with Dynamic Metadata. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Mask = . [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11401 Found Aspect: Host. [Host.cpp @ 468, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Pool Size = 5. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Runtime Mode = Service. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Threading Model = MTA. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Stack Size = 0. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Collect Requests = false. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Shutdown Timeout = 10. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Use IOCP = true. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Service Startup = Manual. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Service Dependencies = Eventlog. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Trusted Requesters = . [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Maximum Concurrent Connections = 100. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Connection Wait Time = 5000. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Max Reconnect Sleep Time = 1000. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Auto-reconnect Attempts = 5. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Monitor Cycle = 15. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Port = 9000. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Service User = .\auduser. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Service Password = *****. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Log Level = Debug. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11401 Found Aspect: Logging. [Host.cpp @ 468, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11403 Operating System Version: Windows XP Professional (Build 2600) with Service Pack 2, Version (2.0), Components: Single User Terminal Services. [Host.cpp @ 501, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11411 Processor 0 Info - Speed: 1596 MHz, Name: Genuine Intel(R) CPU 2140 @ 1.60GHz, Identifier: x86 Family 6 Model 15 Stepping 2, Vendor: GenuineIntel. [Host.cpp @ 548, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11411 Processor 1 Info - Speed: 1596 MHz, Name: Genuine Intel(R) CPU 2140 @ 1.60GHz, Identifier: x86 Family 6 Model 15 Stepping 2, Vendor: GenuineIntel. [Host.cpp @ 548, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11412 Memory Used 71% - Physical Used 294 of 1021 MB, Paged File 2896 of 3988 MB, Virtual Used 1996 of 2047 MB. [Host.cpp @ 557, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, DEBUG] 0x14000 Creating the provider thread. [DataServerThread.cpp @ 44, DataServerThread::Spawn]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, DEBUG] 0x14002 Spawning the thread. [DataServerThread.cpp @ 53, DataServerThread::Spawn]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, DEBUG] 0x14003 Waiting for thread callback. [DataServerThread.cpp @ 57, DataServerThread::Spawn]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1492, Host, DEBUG] 0x14100 Provider thread has been created, and attempting to enter the xMIIOpcDaUDS.DataServer.1. [DataServerThread.cpp @ 82, DataServerThread::SpawnServer]
[05/14/2008-10:56:40.372] focketest [P:2532, T:1492, Host, DEBUG] 0x14101 Initializing COM environment. [DataServerThread.cpp @ 91, DataServerThread::SpawnServer]
[05/14/2008-10:56:40.372] focketest [P:2532, T:1492, Host, DEBUG] 0x14102 Creating the provider. [DataServerThread.cpp @ 98, DataServerThread::SpawnServer]
[05/14/2008-10:56:40.387] focketest [P:2532, T:1492, Host, DEBUG] 0x14103 Creating the local configuration context object. [DataServerThread.cpp @ 105, DataServerThread::SpawnServer]
[05/14/2008-10:56:40.387] focketest [P:2532, T:1492, Host, DEBUG] 0x14104 Initializing the provider. [DataServerThread.cpp @ 109, DataServerThread::SpawnServer]
[05/14/2008-10:56:40.387] focketest [P:2532, T:1492, UDS, DEBUG] 0x2000 Got the self pointer. [Connection.cpp @ 246, CLHOpcDaConnection::FinalInitialize]
[05/14/2008-10:56:40.387] focketest [P:2532, T:1492, UDS, DEBUG] 0x2001 Got the DCOM settings: machine = 192.168.0.1, progid = OPC.SINUMERIK.Machineswitch. [Connection.cpp @ 252, CLHOpcDaConnection::FinalInitialize]
[05/14/2008-10:56:40.387] focketest [P:2532, T:1492, UDS, DEBUG] 0x2002 Got the OPC settings: group = 1234, client = LHDS_OPCGROUP, mode = SYNCHRONOUS. [Connection.cpp @ 258, CLHOpcDaConnection::FinalInitialize]
[05/14/2008-10:56:40.387] focketest [P:2532, T:1492, UDS, DEBUG] 0x2003 Got the sleep time. {extra params}: {1000} [Connection.cpp @ 270, CLHOpcDaConnection::FinalInitialize]
[05/14/2008-10:56:40.387] focketest [P:2532, T:1492, UDS, DEBUG] 0x2016 Checking the state of the connection. [Connection.cpp @ 2032, CLHOpcDaConnection::Load]
[05/14/2008-10:56:40.387] focketest [P:2532, T:1492, UDS, DEBUG] 0x2017 Attempting to connect to the server. [Connection.cpp @ 2036, CLHOpcDaConnection::Load]
[05/14/2008-10:56:40.450] focketest [P:2532, T:1492, UDS, DEBUG] 0x2018 Got the servers class id. [Connection.cpp @ 2048, CLHOpcDaConnection::Load]
[05/14/2008-10:56:41.903] focketest [P:2532, T:1492, UDS, DEBUG] 0x201a Advising on the servers events. [Connection.cpp @ 2087, CLHOpcDaConnection::Load]
[05/14/2008-10:56:41.903] focketest [P:2532, T:1492, UDS, DEBUG] 0x201b Adding the group. [Connection.cpp @ 2096, CLHOpcDaConnection::Load]
[05/14/2008-10:56:41.903] focketest [P:2532, T:1492, UDS, DEBUG] 0x201c Loading group data. [Connection.cpp @ 2114, CLHOpcDaConnection::Load]
[05/14/2008-10:56:41.903] focketest [P:2532, T:1492, UDS, DEBUG] 0x201e Adding all connection items. [Connection.cpp @ 2143, CLHOpcDaConnection::Load]
[05/14/2008-10:56:41.903] focketest [P:2532, T:1492, UDS, INFO] 0x201f Connected to the SINUMERIK OPC-Server DataAccess-V2.4.2.98 (C) Siemens AG (1998-2003) server. [Connection.cpp @ 2154, CLHOpcDaConnection::Load]
[05/14/2008-10:56:41.950] focketest [P:2532, T:2696, UDS, INFO] 0x0 Initializing Browser. [tagUtil/lhds2BrowseThread.h @ 127, lhds::BrowsingThread::DoBrowse]
[05/14/2008-10:56:41.950] focketest [P:2532, T:2696, UDS, INFO] 0x0 Reading Groups. [tagUtil/lhds2BrowseThread.h @ 147, lhds::BrowsingThread::DoBrowse]
[05/14/2008-10:56:41.950] focketest [P:2532, T:2696, UDS, INFO] 0x0 Reading Items. [tagUtil/lhds2BrowseThread.h @ 172, lhds::BrowsingThread::DoBrowse]
[05/14/2008-10:56:41.965] focketest [P:2532, T:2696, UDS, INFO] 0x0 Shutting Browser Down. [tagUtil/lhds2BrowseThread.h @ 279, lhds::BrowsingThread::DoBrowse]
[05/14/2008-10:56:41.965] focketest [P:2532, T:2696, UDS, INFO] 0x0 Browsing Finnished. [tagUtil/lhds2BrowseThread.h @ 303, lhds::BrowsingThread::DoBrowse]
[05/14/2008-10:56:41.997] focketest [P:2532, T:1492, UDS, DEBUG] 0x1003 Adding the modes. [DataServer.cpp @ 80, CLHOpcDaDataServer::FinalInitialize]
[05/14/2008-10:56:42.012] focketest [P:2532, T:1492, UDS, DEBUG] 0x3000 Initializing the Current mode. [basemode.h @ 59, OPCDABaseMode<class CLHOpcDaDSCurrent>::FinalTagModeInitialize]
[05/14/2008-10:56:42.012] focketest [P:2532, T:1492, UDS, DEBUG] 0x3001 Reading from the device? TRUE. [basemode.h @ 67, OPCDABaseMode<class CLHOpcDaDSCurrent>::FinalTagModeInitialize]
[05/14/2008-10:56:42.012] focketest [P:2532, T:1492, UDS, DEBUG] 0x4001 Accessing using: SYNCHRONOUS. [basemode.h @ 75, OPCDABaseMode<class CLHOpcDaDSCurrent>::FinalTagModeInitialize]
[05/14/2008-10:56:42.012] focketest [P:2532, T:1492, UDS, DEBUG] 0x4002 Delay time: 100. [basemode.h @ 82, OPCDABaseMode<class CLHOpcDaDSCurrent>::FinalTagModeInitialize]
[05/14/2008-10:56:42.012] focketest [P:2532, T:1492, UDS, DEBUG] 0x3004 Minimum required quality: BOTH. [basemode.h @ 122, OPCDABaseMode<class CLHOpcDaDSCurrent>::FinalTagModeInitialize]
[05/14/2008-10:56:42.012] focketest [P:2532, T:1492, UDS, DEBUG] 0x3000 Initializing the Current mode. [basemode.h @ 59, OPCDABaseMode<class CLHOpcDaDSCurrentWrite>::FinalTagModeInitialize]
[05/14/2008-10:56:42.012] focketest [P:2532, T:1492, UDS, DEBUG] 0x3001 Reading from the device? TRUE. [basemode.h @ 67, OPCDABaseMode<class CLHOpcDaDSCurrentWrite>::FinalTagModeInitialize]
[05/14/2008-10:56:42.012] focketest [P:2532, T:1492, UDS, DEBUG] 0x4001 Accessing using: SYNCHRONOUS. [basemode.h @ 75, OPCDABaseMode<class CLHOpcDaDSCurrentWrite>::FinalTagModeInitialize]
[05/14/2008-10:56:42.012] focketest [P:2532, T:1492, UDS, DEBUG] 0x4002 Delay time: 100. [basemode.h @ 82, OPCDABaseMode<class CLHOpcDaDSCurrentWrite>::FinalTagModeInitialize]
[05/14/2008-10:56:42.012] focketest [P:2532, T:1492, UDS, DEBUG] 0x3004 Minimum required quality: BOTH. [basemode.h @ 122, OPCDABaseMode<class CLHOpcDaDSCurrentWrite>::FinalTagModeInitialize]
[05/14/2008-10:56:42.012] focketest [P:2532, T:1492, UDS, INFO] 0x1004 Finnished initializing. [DataServer.cpp @ 86, CLHOpcDaDataServer::FinalInitialize]
[05/14/2008-10:56:42.012] focketest [P:2532, T:1492, Host, DEBUG] 0x14105 Attaching the providers to the Accept Thread classes cookie. [DataServerThread.cpp @ 113, DataServerThread::SpawnServer]
[05/14/2008-10:56:42.012] focketest [P:2532, T:1492, Host, DEBUG] 0x14106 Setting the initialization event. [DataServerThread.cpp @ 120, DataServerThread::SpawnServer]
[05/14/2008-10:56:42.012] focketest [P:2532, T:1492, Host, DEBUG] 0x14107 Entering the local message pump. [DataServerThread.cpp @ 126, DataServerThread::SpawnServer]
[05/14/2008-10:56:42.012] focketest [P:2532, T:1236, Host, DEBUG] 0x14004 Finished initializing the provider thread. [DataServerThread.cpp @ 68, DataServerThread::Spawn]
[05/14/2008-10:56:42.012] focketest [P:2532, T:1236, Host, DEBUG] 0x12101 Created a link to the WSA subsystem. [ConnectionManager.cpp @ 23, ConnectionManager::Initialize]
[05/14/2008-10:56:42.090] focketest [P:2532, T:0252, Framework, DEBUG] 0x1a01b Attempting to initialize. [LHDSResponse.cpp @ 84, CLHDSResponse::Initialize]
[05/14/2008-10:56:42.090] focketest [P:2532, T:3476, Framework, DEBUG] 0x1a01b Attempting to initialize. [LHDSResponse.cpp @ 84, CLHDSResponse::Initialize]
[05/14/2008-10:56:42.090] focketest [P:2532, T:2700, Framework, DEBUG] 0x1a01b Attempting to initialize. [LHDSResponse.cpp @ 84, CLHDSResponse::Initialize]
[05/14/2008-10:56:42.090] focketest [P:2532, T:2628, Framework, DEBUG] 0x1a01b Attempting to initialize. [LHDSResponse.cpp @ 84, CLHDSResponse::Initialize]
[05/14/2008-10:56:42.090] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a01b Attempting to initialize. [LHDSResponse.cpp @ 84, CLHDSResponse::Initialize]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, DEBUG] 0x13100 Starting up the accept thread socket. [AcceptThread.cpp @ 146, AcceptThread::ListenIOCP]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, DEBUG] 0x13101 Creating accept socket. [AcceptThread.cpp @ 162, AcceptThread::ListenIOCP]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, DEBUG] 0x13102 Binding accept socket. [AcceptThread.cpp @ 169, AcceptThread::ListenIOCP]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, DEBUG] 0x13103 Listening to accept socket. [AcceptThread.cpp @ 176, AcceptThread::ListenIOCP]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, DEBUG] 0x13105 Spawning accept socket thread. [AcceptThread.cpp @ 182, AcceptThread::ListenIOCP]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, DEBUG] 0x12102 Finnished initializing the connection manager. [ConnectionManager.cpp @ 42, ConnectionManager::Initialize]
[05/14/2008-10:56:42.122] focketest [P:2532, T:0172, Host, DEBUG] 0x13300 Accept thread created. [AcceptThread.cpp @ 192, AcceptThread::AcceptThreadProcIOCP]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, DEBUG] 0x11104 Finnished PreMessageLoop operations. [Host.cpp @ 308, CHostModule::PreMessageLoop]
[05/14/2008-10:56:42.122] focketest [P:2532, T:0172, Host, DEBUG] 0x13301 Waiting for requests. [AcceptThread.cpp @ 208, AcceptThread::AcceptThreadProcIOCP]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, SYSTEM] 0x1140a UDS Progid: xMIIOpcDaUDS.DataServer.1. [Host.cpp @ 592, CHostModule::LogState]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, SYSTEM] 0x1140b UDS Build Configuration: Release. [Host.cpp @ 593, CHostModule::LogState]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, SYSTEM] 0x1140c UDS Build Date: Dec 11 2007. [Host.cpp @ 594, CHostModule::LogState]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, SYSTEM] 0x1140d UDS Description: xMII OPC-DA UDS. [Host.cpp @ 595, CHostModule::LogState]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, SYSTEM] 0x1140e UDS File: xMIIOpcDaUDS.dll. [Host.cpp @ 596, CHostModule::LogState]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, SYSTEM] 0x1140f UDS Version: 4.0.3.10. [Host.cpp @ 597, CHostModule::LogState]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module xMIIUDSHost.exe: Path = C:\Programme\SAP\xMII\UDS\xMIIUDSHost.exe. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module ntdll.dll: Path = C:\WINDOWS\system32\ntdll.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module kernel32.dll: Path = C:\WINDOWS\system32\kernel32.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module WS2_32.dll: Path = C:\WINDOWS\system32\WS2_32.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module msvcrt.dll: Path = C:\WINDOWS\system32\msvcrt.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module WS2HELP.dll: Path = C:\WINDOWS\system32\WS2HELP.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module ADVAPI32.dll: Path = C:\WINDOWS\system32\ADVAPI32.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module RPCRT4.dll: Path = C:\WINDOWS\system32\RPCRT4.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module Secur32.dll: Path = C:\WINDOWS\system32\Secur32.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module USER32.dll: Path = C:\WINDOWS\system32\USER32.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module GDI32.dll: Path = C:\WINDOWS\system32\GDI32.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module ole32.dll: Path = C:\WINDOWS\system32\ole32.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module OLEAUT32.dll: Path = C:\WINDOWS\system32\OLEAUT32.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module ATL80.DLL: Path = C:\WINDOWS\WinSxS\x86_Microsoft.VC80.ATL_1fc8b3b9a1e18e3b_8.0.50727.762_x-ww_cbb27474\ATL80.DLL. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module MSVCR80.dll: Path = C:\WINDOWS\WinSxS\x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.762_x-ww_6b128700\MSVCR80.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module IMM32.DLL: Path = C:\WINDOWS\system32\IMM32.DLL. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module xpsp2res.dll: Path = C:\WINDOWS\system32\xpsp2res.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module CLBCATQ.DLL: Path = C:\WINDOWS\system32\CLBCATQ.DLL. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module COMRes.dll: Path = C:\WINDOWS\system32\COMRes.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module VERSION.dll: Path = C:\WINDOWS\system32\VERSION.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module msi.dll: Path = C:\WINDOWS\system32\msi.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module SXS.DLL: Path = C:\WINDOWS\system32\SXS.DLL. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module xMIIUDSFramework.dll: Path = C:\Programme\SAP\xMII\UDS\xMIIUDSFramework.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module COMCTL32.dll: Path = C:\WINDOWS\system32\COMCTL32.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module SHELL32.dll: Path = C:\WINDOWS\system32\SHELL32.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module SHLWAPI.dll: Path = C:\WINDOWS\system32\SHLWAPI.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module USERENV.dll: Path = C:\WINDOWS\system32\USERENV.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module comctl32.dll: Path = C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.2982_x-ww_ac3f9c03\comctl32.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module msxml4.dll: Path = c:\WINDOWS\system32\msxml4.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module WININET.dll: Path = C:\WINDOWS\system32\WININET.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module Normaliz.dll: Path = C:\WINDOWS\system32\Normaliz.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module iertutil.dll: Path = C:\WINDOWS\system32\iertutil.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module urlmon.dll: Path = C:\WINDOWS\system32\urlmon.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module MSOXMLMF.DLL: Path = C:\Programme\Gemeinsame Dateien\Microsoft Shared\OFFICE11\MSOXMLMF.DLL. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module xMIIOpcDaUDS.dll: Path = C:\Programme\SAP\xMII\UDS\xMIIOpcDaUDS.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module NETAPI32.dll: Path = C:\WINDOWS\system32\NETAPI32.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module opccomn_ps.dll: Path = C:\WINDOWS\system32\opccomn_ps.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module mswsock.dll: Path = C:\WINDOWS\system32\mswsock.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module msv1_0.dll: Path = C:\WINDOWS\system32\msv1_0.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module iphlpapi.dll: Path = C:\WINDOWS\system32\iphlpapi.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module avsda.dll: Path = C:\WINDOWS\system32\avsda.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module hnetcfg.dll: Path = C:\WINDOWS\system32\hnetcfg.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module wshtcpip.dll: Path = C:\WINDOWS\System32\wshtcpip.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module opcproxy.dll: Path = C:\WINDOWS\system32\opcproxy.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module rsaenh.dll: Path = C:\WINDOWS\system32\rsaenh.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module msxml3.dll: Path = C:\WINDOWS\system32\msxml3.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, INFO] 0x11200 Host is starting. [Host.cpp @ 329, CHostModule::RunMessageLoop]
[05/14/2008-10:56:54.386] focketest [P:2532, T:0172, Host, DEBUG] 0x13302 Accepted a good socket. [AcceptThread.cpp @ 216, AcceptThread::AcceptThreadProcIOCP]
[05/14/2008-10:56:54.386] focketest [P:2532, T:0172, Host, DEBUG] 0x13303 Creating IOCP request data. [AcceptThread.cpp @ 227, AcceptThread::AcceptThreadProcIOCP]
[05/14/2008-10:56:54.386] focketest [P:2532, T:0172, Host, DEBUG] 0x13304 Sending IOCP the request data. [AcceptThread.cpp @ 231, AcceptThread::AcceptThreadProcIOCP]
[05/14/2008-10:56:54.386] focketest [P:2532, T:0172, Host, DEBUG] 0x13306 IOCP handle accepted. [AcceptThread.cpp @ 240, AcceptThread::AcceptThreadProcIOCP]
[05/14/2008-10:56:54.386] focketest [P:2532, T:0172, Host, DEBUG] 0x13301 Waiting for requests. [AcceptThread.cpp @ 208, AcceptThread::AcceptThreadProcIOCP]
[05/14/2008-10:56:54.386] focketest [P:2532, T:3688, Host, DEBUG] 0x15003 IOCP completed and performing a read operation. [ThreadPool.cpp @ 427, ThreadPool::ThreadProc]
[05/14/2008-10:56:54.386] focketest [P:2532, T:3688, Framework, DEBUG] 0x17004 Attempting to execute the IOCP logic. [LHDSChannelHandler.cpp @ 470, CLHDSChannelHandler::ExecuteIOCP]
[05/14/2008-10:56:54.386] focketest [P:2532, T:3688, Framework, DEBUG] 0x17005 Attempting to executing the query. [LHDSChannelHandler.cpp @ 552, CLHDSChannelHandler::OnExecute]
[05/14/2008-10:56:54.386] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a028 Clearing the response. [LHDSResponse.cpp @ 94, CLHDSResponse::Clear]
[05/14/2008-10:56:54.386] focketest [P:2532, T:3688, Framework, DEBUG] 0x17008 Decoding the input. [LHDSChannelHandler.cpp @ 559, CLHDSChannelHandler::OnExecute]
[05/14/2008-10:56:54.418] focketest [P:2532, T:3688, Framework, DEBUG] 0x12002 Decoded the context. Original query was: STYLESHEET http://bermii:50000/XMII/Stylesheets/IllumRowsetHTML.xsl QueryTemplate DemoMaschine/testquery Content-Type text/html TotalizerFactor 1.0 NumberFormat 0.00 UseGroupMask false ReaderRoles XMII Users IsCachable false WriterRoles XMII Developers,XMII Administrators DurationUnits M Mode Current IntervalCount 1 RowCount 60 AllowFuture true Version 12.0.3 Build(106) Trace false DocType TagQuery Debug false Resolution 0 SaveDate 05/14/2008 10:48:58 PathID 111 CacheDuration 0 Server OPCserver Duration 60 DateFormat MM/dd/yyyy HH:mm:ss ExcludeRemotes true CacheDurationUnits M AllowBuffering false ID -1 StartDate 1210751815 EndDate 1210755415 TagName.1 DB11.DBB6 !. [LHDSContext.cpp @ 190, CLHDSContext::DecodeContext]
[05/14/2008-10:56:54.418] focketest [P:2532, T:3688, Framework, DEBUG] 0x17006 Executing the query. [LHDSChannelHandler.cpp @ 598, CLHDSChannelHandler::OnExecute]
[05/14/2008-10:56:54.418] focketest [P:2532, T:3688, UDS, DEBUG] 0x2016 Checking the state of the connection. [Connection.cpp @ 2032, CLHOpcDaConnection::Load]
[05/14/2008-10:56:54.418] focketest [P:2532, T:3688, UDS, DEBUG] 0x2005 Connecting. [Connection.cpp @ 326, CLHOpcDaConnection::FinalConnect]
[05/14/2008-10:56:54.418] focketest [P:2532, T:3688, UDS, DEBUG] 0x2016 Checking the state of the connection. [Connection.cpp @ 2032, CLHOpcDaConnection::Load]
[05/14/2008-10:56:54.418] focketest [P:2532, T:3688, UDS, DEBUG] 0x2006 Connected. [Connection.cpp @ 329, CLHOpcDaConnection::FinalConnect]
[05/14/2008-10:56:54.418] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a028 Clearing the response. [LHDSResponse.cpp @ 94, CLHDSResponse::Clear]
[05/14/2008-10:56:54.418] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a002 Setting a new message. [LHDSResponse.cpp @ 378, CLHDSResponse::SetMessage]
[05/14/2008-10:56:54.418] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a004 Header was not sent. [LHDSResponse.cpp @ 382, CLHDSResponse::SetMessage]
[05/14/2008-10:56:54.418] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a000 Setting a non-fatal message. [LHDSResponse.cpp @ 390, CLHDSResponse::SetMessage]
[05/14/2008-10:56:54.418] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a00e Preparing the response. [LHDSResponse.cpp @ 350, CLHDSResponse::Prepare]
[05/14/2008-10:56:54.418] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a007 Attempting to send the header. [LHDSResponse.cpp @ 317, CLHDSResponse::SendHeader]
[05/14/2008-10:56:54.418] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a006 Sending the header. [LHDSResponse.cpp @ 320, CLHDSResponse::SendHeader]
[05/14/2008-10:56:54.418] focketest [P:2532, T:3688, Framework, DEBUG] 0x17001 Attempting to send the data. [LHDSChannelHandler.cpp @ 221, CLHDSChannelHandler::SendData]
[05/14/2008-10:56:54.418] focketest [P:2532, T:3688, Framework, DEBUG] 0x17002 Sending: {0-0-0-1-0-0-1-25-230-110-141-88-0-0-1-25-230-165-123-216}. [LHDSChannelHandler.cpp @ 242, CLHDSChannelHandler::SendData]
[05/14/2008-10:56:54.418] focketest [P:2532, T:3688, Framework, DEBUG] 0x17000 Finnished sending. [LHDSChannelHandler.cpp @ 283, CLHDSChannelHandler::SendData]
[05/14/2008-10:56:54.418] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a002 Setting a new message. [LHDSResponse.cpp @ 378, CLHDSResponse::SetMessage]
[05/14/2008-10:56:54.418] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a003 Header was sent as non-fatal. [LHDSResponse.cpp @ 406, CLHDSResponse::SetMessage]
[05/14/2008-10:56:54.433] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a002 Setting a new message. [LHDSResponse.cpp @ 378, CLHDSResponse::SetMessage]
[05/14/2008-10:56:54.433] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a003 Header was sent as non-fatal. [LHDSResponse.cpp @ 406, CLHDSResponse::SetMessage]
[05/14/2008-10:56:54.433] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a011 Attempting to lock the response. [LHDSResponse.cpp @ 470, CLHDSResponse::Lock]
[05/14/2008-10:56:54.433] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a010 Locking the response. [LHDSResponse.cpp @ 473, CLHDSResponse::Lock]
[05/14/2008-10:56:54.433] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a017 Attempting to insert a node. [LHDSResponse.cpp @ 215, CLHDSResponse::InsertFinished]
[05/14/2008-10:56:54.433] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a01a Node already exists. [LHDSResponse.cpp @ 218, CLHDSResponse::InsertFinished]
[05/14/2008-10:56:54.433] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a023 Finalizing all response nodes. [LHDSResponse.cpp @ 114, CLHDSResponse::FinalizeAll]
[05/14/2008-10:56:54.433] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a011 Attempting to lock the response. [LHDSResponse.cpp @ 470, CLHDSResponse::Lock]
[05/14/2008-10:56:54.433] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a01c Sending node, This is not the last node. [LHDSResponse.cpp @ 120, CLHDSResponse::FinalizeAll]
[05/14/2008-10:56:54.433] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a01e Sending non-fatal message. [LHDSResponse.cpp @ 124, CLHDSResponse::FinalizeAll]
[05/14/2008-10:56:54.433] focketest [P:2532, T:3688, Framework, DEBUG] 0x17001 Attempting to send the data. [LHDSChannelHandler.cpp @ 221, CLHDSChannelHandler::SendData]
[05/14/2008-10:56:54.433] focketest [P:2532, T:3688, Framework, DEBUG] 0x17002 Sending: {0-0-0}. [LHDSChannelHandler.cpp @ 242, CLHDSChannelHandler::SendData]
[05/14/2008-10:56:54.433] focketest [P:2532, T:3688, Framework, DEBUG] 0x17000 Finnished sending. [LHDSChannelHandler.cpp @ 283, CLHDSChannelHandler::SendData]
[05/14/2008-10:56:54.433] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a01f Sending messages. [LHDSResponse.cpp @ 173, CLHDSResponse::FinalizeAll]
[05/14/2008-10:56:54.433] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a01d Sending non-fatal message contents. [LHDSResponse.cpp @ 177, CLHDSResponse::FinalizeAll]
[05/14/2008-10:56:54.433] focketest [P:2532, T:3688, Framework, DEBUG] 0x17001 Attempting to send the data. [LHDSChannelHandler.cpp @ 221, CLHDSChannelHandler::SendData]
[05/14/2008-10:56:54.433] focketest [P:2532, T:3688, Framework, DEBUG] 0x17002 Sending: {0-2-0-47-67-111-117-108-100-32-110-111-116-32-97-100-100-32-34-68-66-49-49-46-68-66-66-54-34-32-116-111-32-116-104-101-32-114-101-115-112-111-110-115-101-32-108-105-115-116-46-0-17-78-111-32-116-97-103-115-32-115-101-108-101-99-116-101-100-46}. [LHDSChannelHandler.cpp @ 242, CLHDSChannelHandler::SendData]
[05/14/2008-10:56:54.433] focketest [P:2532, T:3688, Framework, DEBUG] 0x17000 Finnished sending. [LHDSChannelHandler.cpp @ 283, CLHDSChannelHandler::SendData]
[05/14/2008-10:56:54.433] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a028 Clearing the response. [LHDSResponse.cpp @ 94, CLHDSResponse::Clear]
[05/14/2008-10:56:54.433] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a023 Finalizing all response nodes. [LHDSResponse.cpp @ 114, CLHDSResponse::FinalizeAll]
[05/14/2008-10:56:54.433] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a011 Attempting to lock the response. [LHDSResponse.cpp @ 470, CLHDSResponse::Lock]
[05/14/2008-10:56:54.433] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a010 Locking the response. [LHDSResponse.cpp @ 473, CLHDSResponse::Lock]
[05/14/2008-10:56:54.433] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a017 Attempting to insert a node. [LHDSResponse.cpp @ 215, CLHDSResponse::InsertFinished]
[05/14/2008-10:56:54.433] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a01a Node already exists. [LHDSResponse.cpp @ 218, CLHDSResponse::InsertFinished]
[05/14/2008-10:56:54.433] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a01c Sending node, This is not the last node. [LHDSResponse.cpp @ 120, CLHDSResponse::FinalizeAll]
[05/14/2008-10:56:54.449] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a028 Clearing the response. [LHDSResponse.cpp @ 94, CLHDSResponse::Clear]
[05/14/2008-10:56:54.449] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a023 Finalizing all response nodes. [LHDSResponse.cpp @ 114, CLHDSResponse::FinalizeAll]
[05/14/2008-10:56:54.449] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a011 Attempting to lock the response. [LHDSResponse.cpp @ 470, CLHDSResponse::Lock]
[05/14/2008-10:56:54.449] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a010 Locking the response. [LHDSResponse.cpp @ 473, CLHDSResponse::Lock]
[05/14/2008-10:56:54.449] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a017 Attempting to insert a node. [LHDSResponse.cpp @ 215, CLHDSResponse::InsertFinished]
[05/14/2008-10:56:54.449] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a01a Node already exists. [LHDSResponse.cpp @ 218, CLHDSResponse::InsertFinished]
[05/14/2008-10:56:54.449] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a01c Sending node, This is not the last node. [LHDSResponse.cpp @ 120, CLHDSResponse::FinalizeAll]
[05/14/2008-10:56:54.449] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a028 Clearing the response. [LHDSResponse.cpp @ 94, CLHDSResponse::Clear]
[05/14/2008-10:56:54.449] focketest [P:2532, T:3688, Framework, DEBUG] 0x17007 Done the execution cycle. [LHDSChannelHandler.cpp @ 604, CLHDSChannelHandler::OnExecute]
[05/14/2008-10:56:54.449] focketest [P:2532, T:3688, Framework, DEBUG] 0x1700c Finnished executing: 1. [LHDSChannelHandler.cpp @ 606, CLHDSChannelHandler::OnExecute]
[05/14/2008-10:56:54.449] focketest [P:2532, T:3688, Framework, DEBUG] 0x17003 Finnished execution the IOCP logic. [LHDSChannelHandler.cpp @ 538, CLHDSChannelHandler::ExecuteIOCP]
[05/14/2008-10:57:08.104] focketest [P:2532, T:1236, Host, INFO] 0x11201 Host is exiting. [Host.cpp @ 338, CHostModule::RunMessageLoop]
[05/14/2008-10:57:08.120] focketest [P:2532, T:1492, Host, DEBUG] 0x14108 Shutting down provider the provider thread. [DataServerThread.cpp @ 137, DataServerThread::SpawnServer]
[05/14/2008-10:57:08.120] focketest [P:2532, T:1492, Host, DEBUG] 0x14109 Destroying the local configuration context. [DataServerThread.cpp @ 143, DataServerThread::SpawnServer]
[05/14/2008-10:57:08.120] focketest [P:2532, T:1492, UDS, DEBUG] 0x2020 Checking status before disconnecting. [Connection.cpp @ 2164, CLHOpcDaConnection::Unload]
[05/14/2008-10:57:08.120] focketest [P:2532, T:1492, UDS, DEBUG] 0x2021 Attempting to disconnect from the server. [Connection.cpp @ 2171, CLHOpcDaConnection::Unload]
[05/14/2008-10:57:08.120] focketest [P:2532, T:1492, UDS, DEBUG] 0x2023 Removing the Async event interface. [Connection.cpp @ 2189, CLHOpcDaConnection::Unload]
[05/14/2008-10:57:08.120] focketest [P:2532, T:1492, UDS, DEBUG] 0x2024 Removed the group interface. [Connection.cpp @ 2195, CLHOpcDaConnection::Unload]
[05/14/2008-10:57:08.120] focketest [P:2532, T:1492, UDS, DEBUG] 0x2025 Unadvising on the servers events. [Connection.cpp @ 2207, CLHOpcDaConnection::Unload]
[05/14/2008-10:57:08.120] focketest [P:2532, T:1492, UDS, DEBUG] 0x2027 Server removed. [Connection.cpp @ 2221, CLHOpcDaConnection::Unload]
[05/14/2008-10:57:08.120] focketest [P:2532, T:1492, UDS, INFO] 0x2028 Disconnected from the server. [Connection.cpp @ 2224, CLHOpcDaConnection::Unload]
[05/14/2008-10:57:08.120] focketest [P:2532, T:1492, UDS, DEBUG] 0x2004 Shutting down the connection. [Connection.cpp @ 316, CLHOpcDaConnection::FinalShutdown]
[05/14/2008-10:57:08.120] focketest [P:2532, T:1492, Host, DEBUG] 0x1410a Setting the shutdown event. [DataServerThread.cpp @ 160, DataServerThread::SpawnServer]
The Debug file is from a Windows XP Professional system. But the same thing happens with the UDS installed
on Windows Server 2003 (x64).
The following config variations have been tried:
- synchronous / asynchronous
- Cache mode "None"
- Threading model STA / MTA
Any suggestions?
Regards,
MatthiasHi Mathais,
I assume you have installed the OPC enum services in the same machine where xMII UDS is running.
Also make sure that the browsing mode is set to true in the OPC Server.
We had the same issue...and were receiving the same error...but once we changed teh Browing mode at teh OPC server to true, tag quesries started working....
Hope it helps...
Pramod -
I delete my google contact by fixing the duplicate names, after that I could not add back my contact ? but calendar and e mail works
On my old I phone 3 at the setting it show "mail,contacts, calendars, reminders" but why I phone 4 only show "mail calendar, notes" is this why I can not get my contact back to my phone?
-
Error: the database could not be exclusively locked to perform the operation in sql server 2008 ?
I am trying to rename the database but i am getting below exception while doing it-->
Error: the database could not be exclusively locked to perform the operation.(Microsoft Sql Server,Error 5030)
Thanks.as mentioned earlier by both these users just wait for all the connections to go and then try- it will succed
or else if it is dev\Uat environment & you can kill the conenctions - make the changes (use this as last option)
i was just wondering if you are connected to the same DB? If yes change your context to master(means connect to master DB ) and then issue this command.
Sarabpreet Singh Anand
Blog ,
Personal website
This posting is provided , "AS IS" with no warranties, and confers no rights.
Please remember to click "Mark as Answer" and "Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread. -
I could not add my Hotmail account, it shows that my password is incorrect although I use it to log in on the website!!
Just found the problem those XXXXX made an new security procedure that require you to log in your Microsoft account, and get another password to use on your device (iphone) when you add your Hotmail account for the first time!!!
-
ITunes could not synch calendars to iPhone because the iPhone disconnected
Started getting an error message during iPhone synch about two weeks ago: "iTunes could not synch calendars to iPhone because the iPhone disconnected"
- Am synching to my Outlook calendar on a system running Windows 7
- Everything else (contacts, podcasts, audiobooks, etc.) synchs just fine
- Tried totally resetting the iPhone and restoring the firmware
- Tried deleting the backups, preferences and resetting synch history
- Tried forcing a rewrite/replacement of the calendar database using iTunes
Nothing sems to work...still get the same message about not synching the calendar due to the iPhone disconnecting, but of course, it really hasn't disconnected since I can get it to immediately synch anything else.
Any ideas out there? Thanks...Thanks midwestcraft. I had this problem and your answer solved it for me.
Thought this further info may be of use to some who wants more historic dates in their calendar.
I had "do not sync events older than" unchecked and the input field set to "0". When I changed it to 180, it worked perfectly. I've found that I can increase this number to "545" - anything higher causes the error. This seems to coincide with some strange multiple-entry events in my calendar.
Don't know if this will be a clue for somebody to fix the issue. -
How to add a DataBase Field in PLD from a User Defined Table
Hi All,
Please tell me how should i add a database field in PLD from User Defined Field...
The DropDown for tables in the Property window does not shows the User Define tables...How should i see them...
Thanx in Advance
ManishIn PLD choose object Database. Then press Alt + table combobox, this will show the UDT. Then choose the column.
-
Add a custom-field in the table MARC and manage it in MM01/MM02/MM03
Good day to all of you!
I have this task: To add a custom-field to the table MARC. This custom-field will be managed through the MM01/MM02/MM03 transaction as follows:
In the Basic Data 1 or Basic Data 2 the custom-field data will be added. Let's say the field is MATNR OBSOLETE.
I have searched and implemented the things in customizing: Made a copy of function group MGD1, added the field on the screen.
MY PROBLEM! How to manage it??? When the user enters MM01/MM02/MM03 and update this field, the field should be updated in MARC.
1. I am not sure that this custom-field should be on Basic Data1 or Basic Data2.They want it at plant level.
2. How to manage the data transfer from SAP Standard Program and my Custom Function Group.
PLs: Do not paste me link to sap technical site with that example, because there takes the custom fields and UPDATE a CUSTOM TABLE. I need to update MARC!
All the documentations i have read until now tell you how to add the field, ONLY the first part of the SOLUTION.
Any help, pls?
Good day and thank you!Hi Alex,
In which way you are trying to update that custom filed. Have you written any logic in EXITS/BADIS?
http://pavelgk.pbworks.com/f/6729224-Implement-Screen-Exit-for-MM01-Adding-New-Fields-in-Screen.pdf
and
Just read the OSS note mentioned earlier.
Symptom
You want to integrate customer-specific fields in material master maintenance.
Other terms
SAPLMGMM, RMDATIND, ALE, CI_MMH1, EXIT_SAPLMGMU_001
Solution
To add customer-specific fields to an existing material master table (such as MARA or MARC) , you can proceed as follows as of Release 3.0C:
1. Use an append structure to add the fields to the required table in the Dictionary (this is not a modification; for details, see the SAP document "ABAP/4 Dictionary"). In Release 3.x, the length of the field names must be the same as the standard five character fields. This is necessary because of dynamic assignments. As of Release 4.0A, the lengths of the field names can be longer than five characters. If the changes of the fields should be recorded in the change document and taken into account during ALE distribution, set the 'Change document-relevant' indicator for the corresponding data elements. For table MARA in Release 3.x, you must also enhance the database view MARU because the database changes are carried out using this view. This small modification is no longer necessary as of Release 4.0A because the database view MARU is enhanced automatically when you enhance table MARA or the include EMARA (which is the data part of table MARA).
2. Enhancing online maintenance in customized material master maintenance:
Define a subscreen with your customer-specific fields in a customer-specific function group created as a copy of the standard function group MGD1.
In Customizing, assign this subscreen to a maintenance screen using the "Copy customized material master" function. For details, see the Implementation Guide (IMG). As of Release 4.0A, program COPYMGD1 is available. You can use this program to create customer-specific function groups as required. This program is also incorporated in the Customizing function 'Configure customized material master'. Ensure that each field of the subscreen has a field statement in the flow logic, otherwise the data is not transported correctly. You can use subscreen SAPLMGD1 2002 as an example.
If you want these fields to be subject to standard field selection, you must add new entries for them to the central field table for material master maintenance (T130F):
Application examples for standard field selection:
The field is mandatory and is to be flagged with a "?".
The field belongs exclusively to the purchasing user department. Purchasing data and MRP data are both contained on one screen. However, the MRP controller is not to see the purchasing data.
The following data is required for each field:
a) Field name (T130F-FNAME)
b) Field selection group (T130F-FGRUP)
Here, you should use a standard field group if the customer field is subject to the same field selection as the standard fields of the standard field group. If it is not, use a customer-specific field group.
You must then check and, if necessary, modify the attribute of the field group using the function "Maintain field selection for data screens" in Customizing under "Logistics Basic Data -> Material Master".
Field groups 111 through 120 that are not used in the standard system are reserved as customer-specific field groups. As of Release 3.0F, additional customer field groups are available. (For details, see the IMG).
c) Maintenance status (T130F-PSTAT)
List of the user departments that may maintain the field. You can display possible values by using the input help for the maintenance status field in the Customizing activity "Configure Material Master" when maintaining logical screens.
d) Reference (T130F-KZREF)
This indicator must be set if the field from the reference material should be proposed during creation with reference.
Note: You cannot yet use Customizing to enhance table T130F; you can use only transaction SE16 (Data Browser) or transaction SM31. Future releases will include a separate Customizing function for maintaining customer-specific fields. See Note 306966. By implementing this note you can add entries to table T130F within Customizing. This type of maintenance is possible as of Release 4.5B.
You may change the entries for standard fields only with regard to the reference data and field selection group. Changing other data for standard fields constitutes a modification. Therefore, you cannot use the Customizing function "Assign Fields to Field Groups" to change this data.
In addition, you must not add new standard fields to table T130F.
3. If you want to maintain customer-specific fields using data transfer by direct input or via ALE distribution, proceed as follows:
Add the fields to central field table T130F (see above).
Add the customer-specific fields to the data structures for the data transfer (for example, BMMH1 for the main data).
Also, add the customer-specific fields to the tables in which the incorrect data is stored during direct input. These tables have the same name as the corresponding master data table and also have the suffix _TMP.
For example: If you add customer-specific fields to table MARA, you should add the same fields to table MARA_TMP.
If you use ALE, you must also add fields to the IDoc. To process enhanced IDocs, you can use enhancement MGV00001 with customer exit EXIT_SAPLMV01_002 for creating the IDocs and customer exit EXIT_SAPLMV02_002 for posting the IDocs.
Prior to Release 3.0E, enhancing structure BMMH1 constitutes a modification. In this case, you must add the new fields tot the end of the structure before the last field (SENDE = record end indicator).
As of Release 3.0F, structure BMMH1 contains the customer include CI_MMH1, which is part of the enhancement MGA0001. Here, you must proceed as follows:
a) Add the customer-specific fields to include CI_MMH1.
The names of the fields in CI_MMH1 must be identical to those of the corresponding fields in material master tables MARA, MARC and so on.
Important: The fields must be CHAR type fields. Therefore, create CHAR type data elements whose lengths are identical to the output length of your fields in table MARA and so on. Use these data elements in include CI_MMH1, but use the field names from table MARA and so on.
b) Activate include CI_MMH1.
c) If you have not used customer structure ZMMH1 before, create it as a copy of structure BMMH1 and delete the standard fields that you do not require. You are not permitted to delete field STYPE and include CI_MMH1 when doing this. If you have already used structure ZMMH1, add include CI_MMH1 to it.
d) Activate structure ZMMH1. This also adds the customer-specific fields to ZMMH1.
Run program RMDATING. This program generates routines which are supplied to your customer-specific fields from the input file. As of Release 4.5A, you also need to activate the routines/function modules generated by program RMDATING (especially, the MAT_MOVE_BMMH1_XXXX modules). Details about this subject (especially the procedure when using customer structure ZMMH1) are described in the IMG for transferring the material data under item 'Maintain Transfer Structure'. Also, check the declaration of structure WA in program RMMMBIMC to see whether it is declared with sufficient length. If necessary, enhance the declaration (for the time being, this still constitutes a minor modification).
In addition, lengthen domain DI_DATA with CHAR 5000. As of Release 3.1H, this has already been done.
Important: When using customer-specific fields, you can use only structure ZMMH1 to transfer the data. Otherwise, after the next SAP upgrade which contains new standard fields in structure BMMH1, the input files no longer match. If you want these new standard fields to be transferred, add them after your customer-specific fields (the order of the fields in structure ZMMH1 does not need to be the same as the order of the fields in BMMH1).
If you want foreign key dependencies or fixed domain values to be checked, or another check for a customer field, this is possible up to and including Release 3.0D only by modifying the corresponding check function modules. As of Release 3.0E, you can use function exit EXIT_SAPLMGMU_001 (SAP enhancement MGA00001) for these purposes.
If you want to use engineering change management to schedule future changes for your customer-specific fields or you want to use the 'Display at Key Date' function, execute program GENERATE in addition. This program generates the necessary assignments for interpreting the change documents. With regard to engineering change management, you must read Notes 60281, 60973, and 48962.
To date, it is not possible to integrate customer-specific tables in material master maintenance without making a modification. However, you can create customer-specific development objects containing the essential additional logic. You can then integrate these development objects in your system as part of only a minor modification.
check this link. It may helps you to solve your issue.
Thanks
Sravan -
How to add a standard field to the Product search criteria ?
Hello all,
despite my searches on google and sdn, i'm still confused on how to add a standard field in the search criteria of the Product seach screens (component/view PRD01QR/Search for example) , I mean a standard Product field that is not included in the available fields list in the UI configuration tool.
I found some explanations for adding a specific Z-Field, this is ok , but I'd like to add a standard field as a search criterion, namely the item category group.
Could someone give me the needed detailed steps for this?
thanks
LudovicHi
Chk ths link out :
http://wiki.sdn.sap.com/wiki/display/CRM/Howtoaddanexistingfieldtoasearchpageofadifferent+component
Rgds,
Swati -
Pacman: could not open sync database: core
Yesterday, after i move /usr to a new partition and made change to /etc/fstab to mount /usr to that new partition!
After that, when i tried to run pacman -Syu i got this:
config: line 7: all directives must belong to a section
config: line 7: all directives must belong to a section
config: line 7: all directives must belong to a section
:: Synchronizing package databases...
failed to synchronize core
failed to synchronize extra
failed to synchronize community
error: could not open sync database: core
have you used --refresh yet?
Here is my /etc/pacman.conf
# /etc/pacman.conf
# See the pacman.conf(5) manpage for option and repository directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
HoldPkg = pacman glibc
# If upgrades are available for these packages they will be asked for first
#SyncFirst = pacman
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#XferCommand = /usr/bin/curl %u > %o
#CleanMethod = KeepInstalled
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options (all disabled by default)
#UseSyslog
#ShowSize
#UseDelta
#TotalDownload
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# The testing repositories are disabled by default. To enable, uncomment the
# repo name header and Include lines. You can add preferred servers immediately
# after the header, and they will be used before the default mirrors.
#[testing]
## Add your preferred servers here, they will be used first
#Include = /etc/pacman.d/mirrorlist
[core]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[extra]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
#[community-testing]
## Add your preferred servers here, they will be used first
#Include = /etc/pacman.d/mirrorlist
[community]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#Server = file:///home/custompkgs
Here is pacman.d/mirrorlist
# Arch Linux repository mirrorlist
# North America
# - United States
Server = ftp://ftp.archlinux.org/$repo/os/i686
Server = ftp://locke.suu.edu/linux/dist/archlinux/$repo/os/i686
Server = http://archlinux.unixheads.org/$repo/os/i686
Server = ftp://ftp.gtlib.gatech.edu/pub/linux/di … po/os/i686
Server = ftp://mirror.cs.vt.edu/pub/ArchLinux/$repo/os/i686
Server = http://mirrors.easynews.com/linux/archl … po/os/i686
Server = ftp://ftp.ibiblio.org/pub/linux/distrib … po/os/i686
Server = http://archlinux.umflint.edu/mirrors/ar … po/os/i686
Server = http://mirror.neotuli.net/arch/$repo/os/i686
Server = http://mirror.rit.edu/archlinux/$repo/os/i686
Server = http://mirror.umoss.org/archlinux/$repo/os/i686
Server = http://schlunix.org/archlinux/$repo/os/i686
Server = http://mirror.archlinux.com.ve/$repo/os/i686
#Server = http://mirrors.gigenet.com/archlinux/$repo/os/i686
# - Canada
Server = ftp://mirror.csclub.uwaterloo.ca/archli … po/os/i686
Server = ftp://mirrors.portafixe.com/archlinux/$repo/os/i686
# South America
# - Brazil
Server = http://archlinux.c3sl.ufpr.br/$repo/os/i686
Server = ftp://archlinux.c3sl.ufpr.br/archlinux/$repo/os/i686
Server = ftp://ftp.las.ic.unicamp.br/pub/archlinux/$repo/os/i686
# - Venezuela
#Server = http://mirror2.archlinux.com.ve/$repo/os/i686
# Europe
# - Austria
Server = ftp://gd.tuwien.ac.at/opsys/linux/archl … po/os/i686
# - Belgium
Server = ftp://ftp.belnet.be/mirror/archlinux.org/$repo/os/i686
# - Czech Republic
Server = ftp://ftp.sh.cvut.cz/MIRRORS/arch/$repo/os/i686
# - Denmark
Server = ftp://ftp.klid.dk/archlinux/$repo/os/i686
# - Estonia
Server = ftp://ftp.estpak.ee/pub/archlinux/$repo/os/i686
# - France
#Server = ftp://mir1.archlinuxfr.org/archlinux/$repo/os/i686
#Server = ftp://mir2.archlinuxfr.org/archlinux/$repo/os/i686
#Server = ftp://distrib-coffee.ipsl.jussieu.fr/pu … po/os/i686
#Server = http://mir.archlinux.fr/$repo/os/i686
#Server = ftp://ftp.free.fr/mirrors/ftp.archlinux … po/os/i686
#Server = ftp://ftp.rez-gif.supelec.fr/Linux/arch … po/os/i686
# - Germany
#Server = ftp://ftp.hosteurope.de/mirror/ftp.arch … po/os/i686
#Server = ftp://ftp5.gwdg.de/pub/linux/archlinux/$repo/os/i686
#Server = ftp://ftp.uni-bayreuth.de/pub/linux/arc … po/os/i686
#Server = ftp://ftp.archlinuxppc.org/i686/$repo/os/i686
#Server = ftp://ftp.tu-chemnitz.de/pub/linux/arch … po/os/i686
#Server = http://ftp.uni-kl.de/pub/linux/archlinux/$repo/os/i686
#Server = ftp://mirrors.igprolin-online.org/archl … po/os/i686
#Server = ftp://ftp-stud.hs-esslingen.de/pub/Mirr … po/os/i686
# - Great Britain
#Server = http://www.mirrorservice.org/sites/ftp. … po/os/i686
#Server = ftp://mirrors.uk2.net/pub/archlinux/$repo/os/i686
#Server = http://archlinux.mirrors.uk2.net/$repo/os/i686
#Server = ftp://mirror.lividpenguin.com/pub/archl … po/os/i686
# - Greece
Server = ftp://ftp.ntua.gr/pub/linux/archlinux/$repo/os/i686
# - Hungary
Server = ftp://ftp.mfa.kfki.hu/pub/mirrors/ftp.a … po/os/i686
# - Ireland
#Server = ftp://ftp.heanet.ie/mirrors/ftp.archlin … po/os/i686
# - Italy
#Server = ftp://mi.mirror.garr.it/mirrors/archlinux/$repo/os/i686
# - Netherlands
#Server = ftp://ftp.nluug.nl/pub/metalab/distribu … po/os/i686
#Server = ftp://ftp.surfnet.nl/pub/os/Linux/distr … po/os/i686
# - Norway
#Server = http://mirror.archlinux.no/$repo/os/i686
# - Poland
Server = ftp://mirror.icis.pcz.pl/archlinux/$repo/os/i686
Server = http://piotrkosoft.net/pub/mirrors/ftp. … po/os/i686
Server = ftp://ftp.piotrkosoft.net/pub/mirrors/f … po/os/i686
Server = http://unix.net.pl/archlinux.org/$repo/os/i686
# - Portugal
#Server = ftp://cesium.di.uminho.pt/pub/archlinux/$repo/os/i686
# - Romania
#Server = ftp://ftp.iasi.roedu.net/mirrors/archli … po/os/i686
# - Russia
Server = ftp://mirror.yandex.ru/archlinux/$repo/os/i686
Server = http://archlinux.freeside.ru/$repo/os/i686
# - Sweden
Server = ftp://ftp.ds.hj.se/pub/os/linux/archlinux/$repo/os/i686
Server = ftp://ftp.gigabit.nu/$repo/os/i686
# - Switzerland
#Server = http://archlinux.puzzle.ch/$repo/os/i686
# - Turkey
#Server = ftp://ftp.linux.org.tr/pub/mirrors/arch … po/os/i686
# - Ukraine
#Server = ftp://archlinux.hell.org.ua/archlinux/$repo/os/i686
#Server = ftp://ftp.linux.kiev.ua/pub/Linux/ArchL … po/os/i686
# Asia
# - Indonesia
# Server = http://archlinux.cbn.net.id/$repo/os/i686
# Server = ftp://archlinux.cbn.net.id/pub/archlinux/$repo/os/i686
# - Israel
#Server = http://mirror.isoc.org.il/pub/archlinux/$repo/os/i686
# - Vietnam
# Domain name is ftp.indochinalinux.com but there are frequent DNS problems
Server = ftp://202.78.230.5/archlinux/$repo/os/i686
# Australia
Server = ftp://mirror.pacific.net.au/linux/archl … po/os/i686
Server = ftp://mirror.aarnet.edu.au/pub/archlinux/$repo/os/i686
Server = ftp://ftp.iinet.net.au/pub/archlinux/$repo/os/i686
Server = http://mirror.internode.on.net/pub/arch … po/os/i686
I'm using pacman 2.9.8! Quite out date but i can't update since i'm getting above error!
I'm a newbie, i hope someone gives me some help on this!
Thank you!Yes, i did that but get the same result:
[kureikain@axcoto ~]$ sudo pacman -Syy
Password:
config: line 7: all directives must belong to a section
config: line 7: all directives must belong to a section
config: line 7: all directives must belong to a section
:: Synchronizing package databases...
failed to synchronize core
failed to synchronize extra
failed to synchronize community
error: could not open sync database: core
have you used --refresh yet?
[kureikain@axcoto ~]$
Any way to get pacman work again? Thank you! -
When I am writing an email, I get an alert message that says “The message could not be copied or moved to the drafts folder. Writing to the folder failed. To gain disc space, choose Empty Deleted and choose Compact Folders and try again.”
If I do that, I get a message saying “There was an error copying to the Sent folder,, retry?”
If I retry it sends the uncompleted email. All I can do is keep deleting the message and carry on. Then the whole business might repeat itself.
Help!
FrankBecause the location for each song in your library is on your hard drive. If the hard drive isn't there, how can iTunes play it?
You'll have to move/copy the music from your hard drive to your computer's hard drive.
Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
-Delete EVERYTHING from iTunes, so that your library is now empty.
-Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down. You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
-Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes. Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked. You can close Preferences now.
-Now, drag and drop your music from your hard drive into your iTunes library. iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
Shouldn't have any more problems... -
The installation package could not be opened. Verify that the package exists and that you can access
Do you get the "The installation package could not be opened. Verify that the package exists and that you can access it, or contact the vendor to verify that this a valid windows installer package" error?
download and install "right click take ownership"
http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-me nu-in-vista/
locate the adobe folder inside the programdata folder, mine was located at "C:\programdata\Adobe"
right click the adobe folder, and take ownership of the folder.
Don't know if this will fix other peoples problems, but it fixed mine.Hi
Try the following:
Uninstall iTunes and Quicktime
Reboot
in the task tray right click the quicktime icon and click exit.
navigate to the folder in program files and remove the quicktime directory and all its files.
Reboot.
Now try install iTunes and quicktime and it should work
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
How to add an input field in the web UI of CRM 2007
Hi everybody.
I want add an Input field in the Web UI Screen. How it is possible.
I want get the information with detailed descriptions if possible with screen shorts.
What type of methods it will be generated and what are the code we entered in those methods.
Take according to any example. But with detailed description.
I am new for the CRM 2007. So, please give the screen shorts with proper data.
Not only adding the field. If any data i entered in the adding field then that will be stored in the tables otherwise no use by adding the field.
So, Can anybody please send a proper information according to this.
Here another one How to Add our own table (Ztable) field in the Web UI Screen.
How to add the same field in the BOL.
Please expalin about those concepts with full of screen shorts messages.
Thank You.
Regards,
Krishna.If you want to add extra standard fields (like one you mentioned), you can use Component Workbench and Copy the configuration and create your own configuration and make the "Available Fields" appear there.
If the standrd field is not available, you can Add Context Node using wizard and make it visible.
If its a custom field (a new one); you will have to use EEWB and add the fields and then make it visible in the UI using Component Workbench.
Regards,
Alin
Maybe you are looking for
-
Null values v IOT with primary constraint
Hi gurus. I've overheard boss' conversation with client, who complaints that one of the columns in a system IOT table with NOT NULL and PRIMARY KEY returns nulls. Do you have any ideas? I do not have access to this DB, I just wonder, how it could be
-
HI, I've about 100 users running form6 on the web, some of them are running well, but others give an error("need estblish session"). Is there something to install in browser client ?. The client is running IE4,IE5. I use three-tier architecture. At t
-
Error with illegal start of type
Hi. I have a problem on illegal start of type at "public BookDetails findBook( String bookTitle ){" this sentence. Can you help me to solve it? rest of the class are able to compile.Left with this only... here is my class file: import java.util.Scann
-
Hi All, Could any one please clarify 1.The differnces between AS2 & OFTPS adapters and in which scenarios we prefer OFTPS compared to AS2 2.If we are using AS2 sender adapter to pick data two different mail boxes on different servers, Is there a poss
-
Mac Mini for professional illustration - sensible choice?
I need to upgrade my 1.25 GHz powerbook as it is becoming too slow for carrying out my digital illustration work. I'm considering the new 2.0 Ghz Intel Mac Mini + 23" Cinema Display for the following reasons: 1. The Mac Pro is just too expensive once