Could not adjust InfoSet..

Hello Experts,
I have to enhance existing datasource which was extracted from SAP Query.
However, I found that there was a problem with the infoset referred in the SAP Query.
The system show messages that I need to adjust the InfoSet.
Once I adjusted the infoset, I found the error messages like:
"STRUCTURE-FIELD is not defined in the ABAP Dictionary"
If I could not adjust the InfoSet, the new few which I added could not be generated.
Any suggestion would be appreciated.
Thank you very much
WJ

Ok. I got the solution. You can discard this question.

Similar Messages

TS1347 Dear apple, The governments of Saudi Arabia has changed its weekend from THR&FRI to FRI&SAT, Therefore the start day of the week became SUN. unfortunately all Iphone user could not adjust this change on their I phones . So will you please facilita

Dear apple,
The governments of Saudi Arabia has changed its weekend from THR&FRI to FRI&SAT,
Therefore the start day of the week became SUN. unfortunately all Iphone user could not adjust this change on their I phones .
So will you please facilitate us on this matter.
Regards

Give apple feedback regarding this.
For a temporary fix, change your region? Get a 3rd party Calendar app that fits your needs?
I assume your current region is set in the photo?
If so, pick a region that has a start day of Sunday. (either historically or known for the present)
Note, with changing your region, it will change the default phone number prefix/country code for new contacts and addresses. (calling and SMS is not affected)

Twin upgrade and Unicode conversion: UMG_TWIN_PROCESS_LOGS Could not adjust

Hello,
We have done Upgrade of 4.5B MDMP system to ECC6 EHP4 MDMP and currently Unicode conversion in progress.
We adopted TU&UC. Now we are importing twin spumg results of last run to our procution copy system.
During running UMG_TWIN_PROCESS_LOGs. we are facing some errors
INDX lines to be corrected:               4.417
INDX lines corrected      :               4.144
IN that Could not adjust:        SMODISRC, we are referring Note 991654 - UMG_TWIN_PROCESS_LOGS shows errors on SMODISRC.
please suggest for other error tables below
Could not adjust:        VARI 1160
Could not adjust:        MONI
Could not adjust:        BDLDATCOL 1160 DLR000000492TSK0020305440PV1     0000000000DIFF    BDL   000614a01822pr                        000000Field List          S1100
Please suggest what action can be taken
Regards
Vinay

Hi Vinay,
did you already check attachment of SAP note 765475 - "Unicode conversion Troubleshooting guide" ?
Excerpt:
...check if the entries in
<table name> still exist. In some cases those entries only exist in the
Twin System but no longer in the Production System. In such cases the
message is not an error message but only information.
Best regards,
Nils Buerckel
SAP AG

HT4293 I have an Apple monitor model A1316 is using for Windows computer, but I could not adjust the brightness. The monitor is not bright enough when I turned off the lights in my room.

I have an Apple monitor model A1316 is using for Windows computer, but I could not adjust the brightness. The monitor is not bright enough when I turned off the lights in my room.

Have you plugged the USB cable into the computer also as the brightness is controlled over USB. If this does not work, you would need the Apple Display Driver for the version of Windows that you are using. The display driver is part of BootCamp software that you may be able to find online

I have an original 8Gb iPhone, I bought the stereo headset at Bestbuy but it could not adjust the volume of what I heard from the stereo headset, why is that happen?

The stereo headset is not working properly

Try deleting your hotmail account and then adding it back as an Outlook account instead of "other". It worked for me.

Could not complete your request because an adjustment or fill layer cannot be converted to the desti

Getteing the following message when dragging layers between files - Could not complete your request because an adjustment or fill layer cannot be converted to the destination document mode. Original file was client created and supplied. I have issolated the issue- two hue/saturation adjustment layers. I can and will just recreate them in the new file, but am looking for a root casue or long termsolution as it is a new client I believe will be sending me a good amount of production work.

Actually, 16-bit mode (some filters work in 8-bit only, though) is recommended to reduce the introduction of posterization which can easily arise with the relatively low precision of 8-bit mode. It doesn't benefit all work, but, especially if you use adjustments or low-opacity brushes, it's something to consider.

Error message "could not complete the video frames to layers command because dynamiclink is not avai

So I decided to try my hand at making gifs and so I attempted to upload a video by going to file -> import -> video frames to layers. Before even letting my pick my video it comes up with an error message saying "could not complete the video frames to layers command because dynamiclink is not availible." I then tried file -> open -> and then selected the video and no matter what file type or size I chose I ended up with the same error message.
I looked this problem up and attempted some of the solutions but to no avail. I tried clearing my preferences and restarting photoshop many times in addition to restarting my computer. I also checked to make sure it wasn't being blocked by any firewalls and it wasn't. My opperating system is Windows 7 and I'm using photoshop cs6. I've looked everywhere for an answer to this problem so if anyone is able to help me solve this problem I'd be much obliged.

You see my C:\ drive is quite small as it's a SSD, so I made Adobe install programs on my E:\ drive too, however this was the main cause for Adobe not to function.
After adjusting the settings to install everything back to my C:\ drive, it fixed my issue above and allowed me to run the 64bit version.

LR4 Problem: The file could not be edited because Adobe Photoshop CS6 could not be launched.

Is there a fix for this? When I try to edit an image in Photoshop from Lightroom 4 (CTRL+E), Photoshop CS6 launches immediately but with no image. In Lightroom 4, after about two minutes, the message box appears saying "The file could not be edited because Adobe Photoshop CS6 could not be launched." When I click OK, the image promptly opens in Photoshop CS6 like normal. This wan an itermittent issue for me after the LR4.1 release. I was hoping that LR4.2 would help, but now I get the error every time.
System
Lightroom 4.2 x64
Photoshop CS6 v13.0.1 x64
Bridge 5.0.1.23 x64
Windows 7 Pro x64
AMD Six Core / 3.9 Ghz
16 GB Memory
NVidia Quadro 1 Gb Video
Scratch space on three drives

This may be a cooincidence, I starting having problems after I started using a Nikon D800, which has 36MP files. LR4 released at the same time as the D800. LR4 shows signs of struggling with the larger files, which are typically 280MB TIFFs for the D800, like freezing for several seconds when using an adjustment brush or going into a spasm with the crop tool. Because Photoshop does not have similar large file issues, I'm doing more basic work in Photoshop, like cropping, dodge and burn, exposure adjustment, etc.
Because Photoshop otherwise runs fine, and appears to read all the prefernes properly mid-issue, to get a better idea of what's going on, I turned on Process Monitor from Technet. For what it's worth, LR4 appears to touch the Photoshop preferences before it launches Photoshop. LR4 must have a memory leak in that corrupts the Photoshop preferences file in a way that makes no difference to Photoshop.
My weekend project is to try Capture One to see if I can spend more time on photography and less troubleshooting Adobe problems. As it stands, LR4 is not usable for me.

Could not complete your request because of a program error photoshop cs4

My first frustration right now is that I can't search the forums... anyone got an answer to that? on the right hand side (if I'm logged in) I type in a search for anything and it always shows no search results found! Why? is the search function not working?
Anyway, my problem is that when I try to save a multi-layered psd file into psd or jpg I get this error message: "Could not complete your request because of a program error."
What is causing it?
I checked for updates and PS is up-to-date. I restarted, and it worked great for about 3 saves (different pictures). (I'm basically running through some shots and just doing a quick levels and curves adjustment and running an action putting in my name watermark.)
After that quick edit and trying to save - same error message again.
It started suddenly yesterday - after having used PS for about 1.5 years without a problem. I haven't done any changes to it as far as I'm aware.
Any one seen this before, or have a solution to this?
Thanks!
Computer specs:
Windows 7 Pro - 64-bit
12 GB Ram
750 GB OS hdd where PS is installed
2 TB Media drive where the files are being pulled up from/saved to.
Intel i7 x980 3.33 GHz
GeForce GTX 470 with 1280 MB dedicated memory
Logged in as administrator.

Did you update or change or plug-in or remove anything else on your computer just before it happened? Photoshop relies on other system libraries to do things and maybe one of those changed.
No, I did not change anything; I was editing pictures - from a quadding trip where they asked me to shoot for them - and suddenly I started getting the message on most pictures.
Hard drives are not nearly full. (.99 TB free on media drive and 588 GB free on OS {C} Drive)
scandisk error check? I probably need that.. (I've had some problems with BSOD and had the BIOS corrupted recently that I had to flash the BIOS again. Could that cause something like this?)
How do you reset preferences? Is it the Ctrl + Shift + Alt key immediately after PS starts? I did that and it didn't fix it.
Saving in odd location? No, I don't think so; I save to the same place I save other stuff and I have a solid directory base and I always follow the same procedures. I save back into the same folder I open the file from and save back to the same filename + "edit". That way I can compare side by side and have a backup copy of the file.
The only USB device plugged into the computer is a logitech wireless combo of keyboard and mouse. (And a wired USB keyboard that sits to the side and that I use only when the batteries in my wireless dies.
I can't think of anything that has changed that would cause PS to act like this.
If I can't get it working soon, I'll re-install. I have the Production Premium CS4 version - can I just reinstall PS or would I have to do the whole suite?
Thanks!
PS. I don't know if I was clear enough on what I'm doing: I open anywhere from 1 - 20 pictures at once, and then do a quick level or curve adjustment and save to a different file name. The confusing thing is - some pictures I have no problem with, but others - even though I do exactly the same thing - this error message comes up. I'd say about half of my 107 pictures from the quadding trip refused to save.
It almost makes it seem like some pictures are corrupt or something - and yet, I'd be really surprised to have soo many corrupted images suddenly.

When I open a raw file (NEF Nikon 7100) and apply setting then click save, I get an error ( could not complete your request because of a program error ). Ideas?

when I open a raw file (NEF Nikon 7100) and apply setting then click save, I get an error ( could not complete your request because of a program error ). Ideas?

Oh, dear.
If you use PSE as your external editor for iphoto, you need to save the images back to iphoto by using Save, not Save As and not changing anything like the name or format that would bring up the Save As window. (You may need to adjust the editor prefs>saving files>on first save to save over existing.)
OR you can export the photos from iphoto to the desktop, use file>open in the editor and then change whatever you want and either import the saved image to the organizer or import it back to iphoto as a new file. What you are doing is extremely risky, particularly to the iphoto library which you may easily damage by your workflow.
I would start the organizer holding down the shift key, then create a new catalog and switch to the new one. Then try opening the editor without opening an image and see if you get any farther.
PSE and iphoto are not designed to be used as you've been doing. You are trying to write to the iphoto library from outside iphoto, which is the fastest known way to corrupt the library and lose all your photos.

I can not adjust the calendar in profilemanager

I can not adjust the calendar in profilemanager, in group settings, try to create a profile to calendar automatically adjusts for each user when it is installed on the client machine fails (failed). If the profile is set manually, the message - "The Calendar Account payload could not be installed. An attempt to create the account securely failed"

I think it might be becasue the Profile Distribution Type in the General payload is set to "Automatic Push" and you have an incorrect password for the calendar account. Try switching the Profile Distribution Type to Manual Download and leavign the password blank so the user has to enter it when they try to add it.
There's a weird thing where the calendar password field becomes "required" in Automatic Push mode in which case not only must there be characters entered in the field but the password must be correct for it to work. Not great for a profiel intended for more than one person.
Good luck,
Willhaus

Service Master Key could not be decrypted using one of its encryptions. See sys.key_encryptions for details.

html,body{padding:0;margin:0;font-family:Verdana,Geneva,sans-serif;background:#fff;}html{font-size:100%}body{font-size:.75em;line-height:1.5;padding-top:1px;margin-top:-1px;}h1{font-size:2em;margin:.67em 0}h2{font-size:1.5em}h3{font-size:1.16em}h4{font-size:1em}h5{font-size:.83em}h6{font-size:.7em}p{margin:0
0 1em;padding:0 .2em}.t-marker{display:none;}.t-paste-container{;left:-10000px;width:1px;height:1px;overflow:hidden}ul,ol{padding-left:2.5em}a{color:#00a}code, pre{font-size:1.23em}
I get this message on two different machines installing SQL2014 developer edition, a Windows 7 and a Windows 8 machine. Both machines have SQL2005 through SQL2012 developer machines installed and working great. I have tried uninstalling all SQL2014 stuff and
installing again making sure I was running as an Administrator to no avail.
How do I look at sys.key_encryptionswhen the server will not start to finish installation?
The links in the log only provide the "We're Sorry" message.
This is the first error dialog info
TITLE: Microsoft SQL Server 2014 Setup
The following error has occurred:
Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%25400x4BDAF9BA%25401306%254026
The SQL Server error log has the message in the title.
2014-04-04 17:02:17.49 Server Microsoft SQL Server 2014 - 12.0.2000.8 (X64)
Feb 20 2014 20:04:26
Copyright (c) Microsoft Corporation
Developer Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
2014-04-04 17:02:17.49 Server UTC adjustment: -4:00
2014-04-04 17:02:17.49 Server (c) Microsoft Corporation.
2014-04-04 17:02:17.49 Server All rights reserved.
2014-04-04 17:02:17.49 Server Serverprocess ID is 9236.
2014-04-04 17:02:17.49 Server System Manufacturer: 'Hewlett-Packard', System Model: 'HP EliteBook8760w'.
2014-04-04 17:02:17.49 Server Authentication mode is MIXED.
2014-04-04 17:02:17.49 Server Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\Log\ERRORLOG'.
2014-04-04 17:02:17.49 Server The service account is 'NT Service\MSSQL$SQL2014'. This is an informational message; no user action is required.
2014-04-04 17:02:17.49 Server Registry startup parameters:
-d C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\DATA\master.mdf
-e C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\Log\ERRORLOG
-l C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\DATA\mastlog.ldf
2014-04-04 17:02:17.49 Server Command Line Startup Parameters:
-s "SQL2014"
-m "SqlSetup"
-Q
-q "SQL_Latin1_General_CP1_CI_AS"
-T 4022
-T 4010
-T 3659
-T 3610
-T 8015
2014-04-04 17:02:17.79 Server SQL Server detected 1 sockets with 4 cores per socket and 8 logical processors per socket, 8 total logical processors; using 8 logical processors based on SQL Server licensing. This is an informational message;
no user action is required.
2014-04-04 17:02:17.79 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2014-04-04 17:02:17.79 Server Detected 8142 MB of RAM. This is an informational message; no user action is required.
2014-04-04 17:02:17.80 Server Using conventional memory in the memory manager.
2014-04-04 17:02:17.92 Server Default collation: SQL_Latin1_General_CP1_CI_AS (us_english1033)
2014-04-04 17:02:17.95 Server Perfmoncounters for resource governor pools and groups failed to initialize and are disabled.
2014-04-04 17:02:17.96 Server Query Store settings initialized with enabled = 1,
2014-04-04 17:02:17.97 Server The maximum number of dedicated administrator connections for this instance is '1'
2014-04-04 17:02:17.97 Server This instance of SQL Server last reported using a process ID of 8760 at 4/4/2014 5:02:08 PM (local) 4/4/2014 9:02:08 PM (UTC). This is an informational message only; no user action is required.
2014-04-04 17:02:17.97 Server Node configuration: node 0: CPU mask: 0x00000000000000ff:0 Active CPU mask: 0x00000000000000ff:0. This message provides a description of the NUMA configuration for this computer. This is an informational message
only. No user action is required.
2014-04-04 17:02:17.97 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2014-04-04 17:02:18.00 Server Database Mirroring Transport is disabled in the endpoint configuration.
2014-04-04 17:02:18.00 spid7s Warning ******************
2014-04-04 17:02:18.00 spid7s SQL Server started in single-user mode. This an informational message only. No user action is required.
2014-04-04 17:02:18.01 spid7s Starting up database 'master'.
2014-04-04 17:02:18.02 Server Software Usage Metrics is disabled.
2014-04-04 17:02:18.07 Server CLR version v4.0.30319 loaded.
2014-04-04 17:02:18.11 spid7s 8 transactions rolled forward in database 'master' (1:0). This is an informational message only. No user action is required.
2014-04-04 17:02:18.24 spid7s 0 transactions rolled back in database 'master' (1:0). This is an informational message only. No user action is required.
2014-04-04 17:02:18.25 spid7s Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2014-04-04 17:02:18.26 Server Common language runtime (CLR) functionality initialized using CLR version v4.0.30319 from C:\Windows\Microsoft.NET\Framework64\v4.0.30319\.
2014-04-04 17:02:18.34 spid7s Service Master Key could not be decrypted using one of its encryptions. See sys.key_encryptions for details.
2014-04-04 17:02:18.40 spid7s SQL Server Audit is starting the audits. This is an informational message. No user action is required.
2014-04-04 17:02:18.40 spid7s SQL Server Audit has started the audits. This is an informational message. No user action is required.
2014-04-04 17:02:18.44 spid7s SQL Trace ID 1 was started by login "sa".
2014-04-04 17:02:18.44 spid7s Server name is 'TOMGROSZKO-HP\SQL2014'. This is an informational message only. No user action is required.
2014-04-04 17:02:18.46 spid16s Error: 17190, Severity: 16, State: 1.
2014-04-04 17:02:18.46 spid16s Initializing the FallBackcertificate failed with error code: 1, state: 20, error number: 0.
2014-04-04 17:02:18.46 spid16s Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2014-04-04 17:02:18.46 spid16s Error: 17182, Severity: 16, State: 1.
2014-04-04 17:02:18.46 spid16s TDSSNIClientinitialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
2014-04-04 17:02:18.46 spid16s Error: 17182, Severity: 16, State: 1.
2014-04-04 17:02:18.46 spid16s TDSSNIClientinitialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
2014-04-04 17:02:18.46 spid16s Error: 17826, Severity: 18, State: 3.
2014-04-04 17:02:18.46 spid16s Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-04-04 17:02:18.46 spid16s Error: 17120, Severity: 16, State: 1.
2014-04-04 17:02:18.46 spid16s SQL Server could not spawn FRunCommunicationsManagerthread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
And a copy of the install log.
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2014-04-04 16:23:39
End time: 2014-04-04 17:06:25
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: TOMGROSZKO-HP
Machine processor count: 8
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered Configured
SQL Server 2005 SQL2005 MSSQL.1 Database Engine Services
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 SQL2005 MSSQL.1 SQL Server Replication
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 SQL2005 MSSQL.1 Full-Text and Semantic Extractions for Search 1033
Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 SQL2005 MSSQL.1 SharedTools
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 SQL2005 MSSQL.2 Analysis Services
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 SQL2005 MSSQL.3 Reporting Services - Native
1033 Developer Edition (64-bit) 9.00.1399.06 No Yes
SQL Server 2005 DTS
1033 Developer Edition (64-bit) 9.4.5069 No
Yes
SQL Server 2005 Tools
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 ToolsClient
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 ToolsClient\Connectivity
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 ToolsDocument
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 ToolsDocument\BOL
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 ToolsDocument\Samples
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 NS
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2008 R2 SQL2008R2 MSSQL10_50.SQL2008R2 Database Engine Services 1033
Developer Edition 10.51.2550.0 No Yes
SQL Server 2008 R2 SQL2008R2 MSSQL10_50.SQL2008R2 SQL Server Replication 1033
Developer Edition 10.51.2550.0 No Yes
SQL Server 2008 R2 SQL2008R2 MSSQL10_50.SQL2008R2 Full-Text and Semantic Extractions for Search 1033 Developer
Edition 10.51.2500.0 No Yes
SQL Server 2008 R2 SQL2008R2 MSAS10_50.SQL2008R2 Analysis Services 1033
Developer Edition 10.51.2500.0 No Yes
SQL Server 2008 R2 SQL2008R2 MSRS10_50.SQL2008R2 Reporting Services - Native 1033
Developer Edition 10.51.2550.0 No Yes
SQL Server 2008 R2 Management Tools - Basic
1033 Developer Edition 10.51.2550.0 No Yes
SQL Server 2008 R2 Management Tools - Complete
1033 Developer Edition 10.51.2500.0 No Yes
SQL Server 2008 R2 Client Tools Connectivity
1033 Developer Edition 10.51.2500.0 No Yes
SQL Server 2008 R2 Client Tools Backwards Compatibility
1033 Developer Edition 10.51.2500.0 No Yes
SQL Server 2008 R2 Client Tools SDK
1033 Developer Edition 10.51.2500.0 No Yes
SQL Server 2008 R2 Integration Services
1033 Developer Edition 10.51.2550.0 No Yes
SQL Server 2012 SQL2012 MSSQL11.SQL2012 Database Engine Services 1033
Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 SQL2012 MSSQL11.SQL2012 SQL Server Replication 1033
Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 SQL2012 MSSQL11.SQL2012 Full-Text and Semantic Extractions for Search 1033
Developer Edition 11.1.3000.0 No Yes
SQL Server 2012 SQL2012 MSSQL11.SQL2012 Data Quality Services 1033
Developer Edition 11.1.3000.0 No Yes
SQL Server 2012 SQL2012 MSAS11.SQL2012 Analysis Services
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 SQL2012 MSRS11.SQL2012 Reporting Services - Native 1033
Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 Management Tools - Basic
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 Management Tools - Complete
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 Client Tools Connectivity
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 Client Tools Backwards Compatibility
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 Client Tools SDK
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 BIDS
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 SQL Server Data Tools - Business
Intelligence for Visual Studio 2012 1033 11.1.3402.0 No Yes
SQL Server 2012 Integration Services
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 LocalDB
1033 Express Edition 11.1.3128.0 No Yes
SQL Server 2012 Master Data Services
1033 Developer Edition 11.1.3000.0 No Yes
Package properties:
Description: Microsoft SQL Server 2014
ProductName: SQL Server 2014
Type: RTM
Version: 12
SPLevel: 0
Installation location: C:\Downloads\SQL2014\SQL\x64\setup\
Installation edition: Developer
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLAgent$SQL2014
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\SQLData\MSSQL\SQL2014\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS12.SQL2014\OLAP\Config
ASDATADIR: C:\SQLData\MSSQL\SQL2014\OLAP
ASLOGDIR: C:\SQLData\MSSQL\SQL2014\OLAP
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: NT Service\MSOLAP$SQL2014
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: TomGroszko-HP\Tom Groszko
ASTEMPDIR: C:\SQLData\MSSQL\SQL2014\OLAP
BROWSERSVCSTARTUPTYPE: Automatic
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140404_162339\ConfigurationFile.ini
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, MDS
FILESTREAMLEVEL: 3
FILESTREAMSHARENAME: SQL2014
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SQL2014
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: c:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: c:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQL2014
INSTANCENAME: SQL2014
ISSVCACCOUNT: NT Service\MsDtsServer120
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: SharePointFilesOnlyMode
RSSVCACCOUNT: NT Service\ReportServer$SQL2014
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: C:\SQLData\MSSQL\SQL2014\Backup
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$SQL2014
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: TomGroszko-HP\Tom Groszko
SQLTEMPDBDIR: C:\SQLData\MSSQL\SQL2014\Engine
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: C:\SQLData\MSSQL\SQL2014\Engine
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: true
TCPENABLED: 0
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
USEMICROSOFTUPDATE: false
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140404_162339\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Master Data Services
Status: Passed
Feature: Integration Services
Status: Passed
Feature: Data Quality Client
Status: Passed
Feature: Analysis Services
Status: Passed
Feature: Reporting Services - SharePoint
Status: Passed
Feature: Reporting Services Add-in for SharePoint Products
Status: Passed
Feature: Documentation Components
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140404_162339\SystemConfigurationCheck_Report.htm
Any suggestions for what step to take next will be appreciated.
Thanks
Tom G.

Hi Tom,
Sorry for the delay. We can exclude the media factor since you were able to install it on VM with this media.
If I understand correctly, Shanky said “Abve message can also appear due to corrupt profile so deleteting old profile and creating new one and using this to install would also help.Make sure you always RK on setup.exe and select run as administrator” which
means your user account may be corrupted rather than the Virtual account. You can create a new Windows user account and use it to log into the system. Then, re-try the installation.
Additional information:
http://windows.microsoft.com/en-us/windows/create-user-account#create-user-account=windows-8
Thanks.
Tracy Cai
TechNet Community Support

After connecting my Apple TV this morning, I have no sound. It is hooked up to play through my television speakers. Any ideas on how to get sound? Also, I tried hooking it up through my surround receiver, but could not get it to come up on my ty screen.

After connecting my Apple TV this morning, I have no sound. It is hooked up to play through my television speakers. Any ideas on how to get sound? Also, I tried hooking it up through my surround receiver, but could not get it to come up on my ty screen, what can I do to correct this problem?

Have you tried adjusting the "Audio Out" and the "Dolby Digital" settings in settings > audio and video? It may be worth trying several combinations of these settings, although typically it is the "Dolby Digital" setting that causes most problems for users.
Also make sure that you have correctly mapped the input port on your sound system to the output, if you are unsure about how to do this, refer to the manual that came with your sound system.
Have you tried playing various content sources (i.e. podcasts, music, iTunes Store video, other video etc), do you have the same problem with all types of content? If you use optical you might also check that you can see a red light at the end of your optical audio cable. Is your optical audio cable plugged straight into your sound system, or does it go through a switch or other device?

Lightroom 5.6 Error: The file could not be edited because Photoshop CC could not be launched...

I upgraded to lightroom 5.6 recently and i am using photoshop cs 6.
My OS is windows 8 on i5 4670 with R280X gfx card 16gb ram
After editing a photo with lightroom , when I right click to edit in photoshop, immediately photoshop launch but the image isnt imported to photoshop.
After like 30sec an error message pop out saying "The file could not be edited because Photoshop CC could not be launched".
After another 10sec then the photo appear in photoshop... this is getting irritating to me.
if i select to just open the original or a copy of the original it works fine. It only happens when I try to open it with lightroom changes.
I had uninstall/reinstall both photoshop and lightroom as well as remove all the plugins i had, but the problem doesnt go away.
Another issue with lightroom 5.6 is the the adjustment brush is slow and sluggish, it is so unusable when I zoom in to use the adjustment brush.
I didnt had that issue before i upgraded. OMG
anyone have solution to my problem ?

I upgraded to the latest version of ps cc 2014 , problem resolved.
look like cs6 i outdated or something

"The file is damaged and could not be repaired" error when trying to open a PDF in Reader

A few of our employess (only 3 out of over 100 so far) have been getting the error, "The file is damaged and could not be repaired" when trying to open some PDFs. Other people are able to open the same PDF files with no error. It's happening on about 10% of the time. I've read a bunch of threads here with this isue and tried some suggested fixes and nothing has resolved the issue. Here is what I have found works and does not work and the info on their computers:
Computers:
1 Dell Vostro desktop running WIndows 7
1 Toshiba Satellite C55 runnign Windows 8
1 Samsung ATIV Book 4 running Windows 8
All using Adobe Reader XI but we did uninstall that version and tried previous versions and still got the error.
Did Not Work:
As suggested by the company that we use online for claims adjustments where this error is occuring, we tried using a different PDF creator since the files were created using a free PDF creator by the employees. PDF995 and PDFcreator (pdfforge) did not resolve the issue. I then created the PDFs with my Adobe Acrobat, uploaded from my computer to the online program, and that did not resolve the issue.
Saving the file to hard drive and then opening in Adobe did not work.
Turning off Protected Mode and Enhanced Security did not work.
Compatibility View settings enabled in Internet Explorer 10 did not resolve the issue. The previously mentioned claims adjustment software company we use online was code for IE so is not fully compatible with other browsers.
That being said I did try to open the PDF files in Chrome and it also did not work. Same error message.
Does work:
I download the file they cannot open onto my hard drive, open in Adobe Acrobat, Save as a pdf, then email it to them and they can open it via email attachment.
If they close the error and continue trying to open the file over and over sometimes it will eventually open.
Is there a setting in Windows that is preventing them from opening a small % of files some of the time? Thanks in advance for any help!
James

If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

Could not adjust InfoSet..

Similar Messages

Maybe you are looking for