Could not albe to refresh cache

If 500 says HTTP connection.
I do not understand why my cache is not getting refreshed.
I am getting an error "Could not able to refresh cache",Error while trying to refresh the cache in sxi_cache.
Please Clarify.
Thanks.
Srini

Did you go through the Document in this thread? Refer to the trouble shooting section and try to debug,
could not able to refresh cache
Regards
Bhavesh

Similar Messages

  • Webdynpro - Object could not be found in cache, key is null

    Folks
    I am getting this marvelous exception for which I am not able to find any not in SAP Service Portal as well. Any insights shared will be highly appreciated.
    [EXCEPTION]
    com.sap.tc.webdynpro.services.sal.util.cache.ResourceNotFoundException: Object could not be found in cache, key is null!... [see details]
    EXCEPTION]
    com.sap.tc.webdynpro.services.sal.util.cache.ResourceNotFoundException: Object could not be found in cache, key is null!
    at com.sap.tc.webdynpro.services.sal.util.cache.WebResourceCache.getResource(WebResourceCache.java:108)
    at com.sap.tc.webdynpro.services.sal.util.cache.WebResourceCache.getResource(WebResourceCache.java:134)
    at com.sap.tc.webdynpro.serverimpl.defaultimpl.datatransport.DataTransportFactory.getOutputMassDatasource(DataTransportFactory.java:93)
    at com.sap.tc.webdynpro.services.sal.datatransport.core.InternalMassDataTransport.getOutputMassDatasource(InternalMassDataTransport.java:50)
    at com.sap.tc.webdynpro.progmodel.context.ModifiableBinaryType.parse(ModifiableBinaryType.java:133)
    at com.sap.tc.webdynpro.clientserver.data.DataContainer.doParse(DataContainer.java:1434)
    at com.sap.tc.webdynpro.clientserver.data.DataContainer.validatePendingUserInput(DataContainer.java:1324)
    at com.sap.tc.webdynpro.clientserver.data.DataContainer.validatePendingUserInput(DataContainer.java:681)
    at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.validate(ClientComponent.java:715)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doValidate(WindowPhaseModel.java:326)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:120)
    at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
    at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
    at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:319)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
    at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
    at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
    at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)

    Is the system 6.40 release ? Have you referred to SAP Note 923694  ?
    Search in SAP Notes for 'Importing A Web Dynpro Hot Fix', find the one relevant for your SP level and make sure you have implemented those fixes if you find one for the SP.
    Hope this helps
    Regards,
    Snehal

  • Newsfeed error - The operation failed because the server could not access the distributed cache.

    Recently installed SharePoint 2013 RTM, on the newsfeed page an error is displayed, and no entries display in the following or everyone tabs.
    "The operation failed because the server could not access the distributed cache."
    Reading through various posts, I've checked:
    - Activity feeds and mentions tabs are working as expected.
    - User Profile Service is operational and syncing as expected
    - Search is operational and indexing as expected
    - The farm was installed based on the autospinstaller scripts.
    - Don't believe this to be a permissions issue, during testing added accounts to the admin group to verify
    Any suggestions are welcomed, thanks.
    The full error message and trace logs is as follows.
    SharePoint returned the following error: The operation failed because the server could not access the distributed cache. Internal type name: Microsoft.Office.Server.Microfeed.MicrofeedException. Internal error code: 55. Contact your system administrator
    for help in resolving this problem.
    From the trace logs there's several messages which are triggered around the same time:
    http://msdn.microsoft.com/en-AU/library/System.ServiceModel.Diagnostics.TraceHandledException.aspxHandling an exception. Exception details: System.ServiceModel.FaultException`1[Microsoft.Office.Server.UserProfiles.FeedCacheFault]: Unexpected exception in
    FeedCacheService.GetPublishedFeed: Object reference not set to an instance of an object.. (Fault Detail is equal to Microsoft.Office.Server.UserProfiles.FeedCacheFault)./LM/W3SVC/2/ROOT/d71732192b0d4afdad17084e8214321e-1-129962393079894191System.ServiceModel.FaultException`1[[Microsoft.Office.Server.UserProfiles.FeedCacheFault,
    Microsoft.Office.Server.UserProfiles, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c]], System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089Unexpected exception in FeedCacheService.GetPublishedFeed: Object
    reference not set to an instance of an object..  
     at Microsoft.Office.Server.UserProfiles.FeedCacheService.Microsoft.Office.Server.UserProfiles.IFeedCacheService.GetPublishedFeed(FeedCacheRetrievalEntity fcTargetEntity, FeedCacheRetrievalEntity fcViewingEntity, FeedCacheRetrievalOptions fcRetOptions)
     at SyncInvokeGetPublishedFeed(Object , Object[] , Object[] )    
     at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs)    
     at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc)    
     at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5(MessageRpc& rpc)    
     at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage31(MessageRpc& rpc)    
     at System.ServiceModel.Dispatcher.MessageRpc.Process(Boolean isOperationContextSet)System.ServiceModel.FaultException`1[Microsoft.Office.Server.UserProfiles.FeedCacheFault]: Unexpected exception in FeedCacheService.GetPublishedFeed: Object reference not
    set to an instance of an object.. (Fault Detail is equal to Microsoft.Office.Server.UserProfiles.FeedCacheFault).
    SPSocialFeedManager.GetFeed: Exception: Microsoft.Office.Server.Microfeed.MicrofeedException: ServerErrorFetchingConsolidatedFeed : ( Unexpected exception in FeedCacheService.GetPublishedFeed: Object reference not set to an instance of an object.. ) : Correlation
    ID:db6ddc9b-8d2e-906e-db86-77e4c9fab08f : Date and Time : 31/10/2012 1:40:20 PM    
     at Microsoft.Office.Server.Microfeed.SPMicrofeedThreadCollection.PopulateConsolidated(SPMicrofeedRetrievalOptions retOptions, SPMicrofeedContext context)    
     at Microsoft.Office.Server.Microfeed.SPMicrofeedThreadCollection.Populate(SPMicrofeedRetrievalOptions retrievalOptions, SPMicrofeedContext context)    
     at Microsoft.Office.Server.Microfeed.SPMicrofeedManager.CommonGetFeedFor(SPMicrofeedRetrievalOptions retrievalOptions)    
     at Microsoft.Office.Server.Microfeed.SPMicrofeedManager.CommonPubFeedGetter(SPMicrofeedRetrievalOptions feedOptions, MicrofeedPublishedFeedType feedType, Boolean publicView)    
     at Microsoft.Office.Server.Microfeed.SPMicrofeedManager.GetPublishedFeed(String feedOwner, SPMicrofeedRetrievalOptions feedOptions, MicrofeedPublishedFeedType typeOfPubFeed)    
     at Microsoft.Office.Server.Social.SPSocialFeedManager.Microsoft.Office.Server.Social.ISocialFeedManagerProxy.ProxyGetFeed(SPSocialFeedType type, SPSocialFeedOptions options)    
     at Microsoft.Office.Server.Social.SPSocialFeedManager.<>c__DisplayClass4b`1.<S2SInvoke>b__4a()
    Microsoft.Office.Server.Social.SPSocialFeedManager.GetFeed: Microsoft.Office.Server.Microfeed.MicrofeedException: ServerErrorFetchingConsolidatedFeed : ( Unexpected exception in FeedCacheService.GetPublishedFeed: Object reference not set to an instance of
    an object.. ) : Correlation ID:db6ddc9b-8d2e-906e-db86-77e4c9fab08f : Date and Time : 31/10/2012 1:40:20 PM    
     at Microsoft.Office.Server.Microfeed.SPMicrofeedThreadCollection.PopulateConsolidated(SPMicrofeedRetrievalOptions retOptions, SPMicrofeedContext context)    
     at Microsoft.Office.Server.Microfeed.SPMicrofeedThreadCollection.Populate(SPMicrofeedRetrievalOptions retrievalOptions, SPMicrofeedContext context)    
     at Microsoft.Office.Server.Microfeed.SPMicrofeedManager.CommonGetFeedFor(SPMicrofeedRetrievalOptions retrievalOptions)    
     at Microsoft.Office.Server.Microfeed.SPMicrofeedManager.CommonPubFeedGetter(SPMicrofeedRetrievalOptions feedOptions, MicrofeedPublishedFeedType feedType, Boolean publicView)    
     at Microsoft.Office.Server.Microfeed.SPMicrofeedManager.GetPublishedFeed(String feedOwner, SPMicrofeedRetrievalOptions feedOptions, MicrofeedPublishedFeedType typeOfPubFeed)    
     at Microsoft.Office.Server.Social.SPSocialFeedManager.Microsoft.Office.Server.Social.ISocialFeedManagerProxy.ProxyGetFeed(SPSocialFeedType type, SPSocialFeedOptions options)    
     at Microsoft.Office.Server.Social.SPSocialFeedManager.<>c__DisplayClass4b`1.<S2SInvoke>b__4a()    
     at Microsoft.Office.Server.Social.SPSocialUtil.InvokeWithExceptionTranslation[T](ISocialOperationManager target, String name, Func`1 func)
    Microsoft.Office.Server.Social.SPSocialFeedManager.GetFeed: Microsoft.Office.Server.Social.SPSocialException: The operation failed because the server could not access the distributed cache. Internal type name: Microsoft.Office.Server.Microfeed.MicrofeedException.
    Internal error code: 55.    
     at Microsoft.Office.Server.Social.SPSocialUtil.TryTranslateExceptionAndThrow(Exception exception)    
     at Microsoft.Office.Server.Social.SPSocialUtil.InvokeWithExceptionTranslation[T](ISocialOperationManager target, String name, Func`1 func)    
     at Microsoft.Office.Server.Social.SPSocialFeedManager.<>c__DisplayClass48`1.<S2SInvoke>b__47()    
     at Microsoft.Office.Server.Social.SPSocialUtil.InvokeWithExceptionTranslation[T](ISocialOperationManager target, String name, Func`1 func)

    Thanks Thuan,
    I've restarted to the Distrubiton Cache servicem and the error is still occuring.
    The AppFabric Caching Service is running under the service apps account, and does appear operational based on:
    > use-cachecluster
    > get-cache
    CacheName            [Host]
                         Regions
    default
    DistributedAccessCache_1e9f4999-0187-40e8-aa92-f8308d47d6e9
    DistributedActivityFeedCache_1e9f4999-0187-40e8-aa92-f8308d47d6e9
    DistributedActivityF [SERVER:22233]
    eedLMTCache_1e9f4999 LMT(Primary)
    -0187-40e8-aa92-f830
    8d47d6e9
    DistributedBouncerCache_1e9f4999-0187-40e8-aa92-f8308d47d6e9
    DistributedDefaultCache_1e9f4999-0187-40e8-aa92-f8308d47d6e9
    DistributedLogonToke [SERVER:22233]
    nCache_1e9f4999-0187 Default_Region_0538(Primary)
    -40e8-aa92-f8308d47d Default_Region_0004(Primary)
    6e9                  Default_Region_0451(Primary)
    DistributedSearchCache_1e9f4999-0187-40e8-aa92-f8308d47d6e9
    DistributedSecurityTrimmingCache_1e9f4999-0187-40e8-aa92-f8308d47d6e9
    DistributedServerToAppServerAccessTokenCache_1e9f4999-0187-40e8-aa92-f8308d47d6e9

  • Could not load or refresh node tree creation failed on node

    Hi Experts
    I created one user with MSS role and ERP COMM role.
    It is working fine. We restarted the server for other purpose. Then surprisingly the MSS role was locked. I am unable to see the MSS tab in the top level navigation.
    When i expand the workset in line manager -> Manager Self Service -> Worksets
    I am getting the following error::
    Could not load or refresh node tree creation failed on node:
    pcd:portal_content/com.sap.pct/line_manager/com.sap.pct.erp.mss.bp_folder/com.sap.pct.erp.mss.worksets
    I can be able to expand and priveiw the Pages and iviews, except the worksets
    Please guide me, i am badly stucked here.
    Regards,
    Srinivas

    Hi KRISHNA,
    Check the below thread and notes mentioned in that
    Re: Tree creation failed on node: pcd:portal_content
    Koti Reddy

  • File Upload Error : Object could not be found in cache, key is null!

    I am having this problem. when I attach a file and press submit button, it gave me
    "Object could not be found in cache, key is null !"
    In my ViewController context I have Invoice_DOC attribute (binary, fileupload)
    and that is mapped to ComponentContoller.attribute(INVOICE_DOC).
    here is wdDoInit() method of my view controller..
    public void wdDoInit()
        IWDAttributeInfo attInfo =
              wdThis.wdGetDemurrageCompController().wdGetContext ().nodeSubmitElements().getNodeInfo().getAttribute(IPrivateDemurrageComp.ISubmitElementsElement.INVOICE_DOC);
    IWDModifiableBinaryType binaryType = (IWDModifiableBinaryType) attInfo.getModifiableSimpleType();
    Any Idea why I am having this..
    I went through some tutorials, The controller node has cardinality of 1..1...

    Hi,
    Could you please try with the following code. Here I have an Action for file uploading.
    public void wdDoInit()
    //@@begin wdDoInit()
    // get attribute info for context attribute "FileResource"
    IWDAttributeInfo attributeInfo =
    wdContext.getNodeInfo().getAttribute(
    IPrivateFileUploadView.IContextElement.FILE_RESOURCE);
    // make the context attribute's simple type modifiable.
    // Only with this line of code the binary data (stored within the
    // context attribute) can be parsed. The Web Dynpro Runtime stores
    // the mime-object’s metadata within the attribute’s type metadata.
    attributeInfo.getModifiableSimpleType();
    // set the file details invisible
    wdContext.currentContextElement().setDetailsVisibility(
    WDVisibility.NONE);
    //@@end
    //Another method for File upload button
    public void onActionUploadFile(
    com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent) {
    //@@begin onActionUploadFile(ServerEvent)
    // get attribute info for context attribute 'FileResource'
    IWDAttributeInfo attributeInfo =
    wdContext.getNodeInfo().getAttribute(
    IPrivateFileUploadView.IContextElement.FILE_RESOURCE);
    // get modifiable binary type from the attribute info,
    // requires type cast.
    IWDModifiableBinaryType binaryType =
    (IWDModifiableBinaryType) attributeInfo.getModifiableSimpleType();
    IPrivateFileUploadView.IContextElement element =
    wdContext.currentContextElement();
    // if a file in the 'FileResource' attribute exists
    if (element.getFileResource() != null) {
    try {
    String mimeType = binaryType.getMimeType().toString();
    byte[] file = element.getFileResource();
    // get the size of the uploaded file
    element.setFileSize(this.getFileSize(file));
    // get the extension of the uploaded file
    element.setFileExtension(
    binaryType.getMimeType().getFileExtension());
    // NOTE: context attribute 'FileName' must not be set
    // because the FileUpload-UI-element property 'fileName'
    // is bound to it. Consequently the fileName is automatically
    // written to the context after file upload.
    // set the details visibility attribute
    element.setDetailsVisibility(WDVisibility.VISIBLE);
    // report success message
    wdComponentAPI.getMessageManager().reportMessage(
    IMessageFileUpDownloadComp.SF_UPLOAD,
    new Object[] { binaryType.getFileName()},
    false);
    } catch (Exception e) {
    throw new WDRuntimeException(e);
    // if no file in the 'FileResource' attribute exists
    else {
    // set the details visibility attribute, hide details
    element.setDetailsVisibility(WDVisibility.NONE);
    // report error message
    IWDMessageManager msgMgr = wdComponentAPI.getMessageManager();
    msgMgr.reportContextAttributeMessage(
    element,
    attributeInfo,
    IMessageFileUpDownloadComp.NO_FILE,
    new Object[] { "" },
    true);
    // clear the FileResource context value attribute
    element.setFileResource(null);
    //@@end
    Thanks
    Chandan

  • FileUplaod UI : Object could not be found in cache, key is null!

    Hi,
    I get problem using FileUpload UI Element.
    When I select a file (any file .) and push a button (uplaod bt), I get an error message below the FileUpload UI:
    ==>  Object could not be found in cache, key is null!
    There is something odd cause in the event linked to my upload button the function is completly emtpy. So it is not o Code error. And of course I've make the context attribute Modifiable :
    IWDModifiableBinaryType type = (IWDModifiableBinaryType) wdContext.getNodeInfo().getAttribute(IPrivateExternalOrderCompView.IContextElement.FILE_RESOURCE).getModifiableSimpleType();
    Any Idear ?
    Regards,

    Hi,
    Ok guys thanks for your answers, I fixed my problem.
    The thing was I missused simple modify type.
    So here is what I'm doing :
    In my context View :
    file type : Binary
    wdInit of the View :
    IWDAttributeInfo attInfo = wdContext.getNodeInfo().getAttribute(IPrivateExternalOrderCompView.IContextElement.FILE);
              ISimpleTypeModifiable type = attInfo.getModifiableSimpleType();
              IWDModifiableBinaryType binaryType = (IWDModifiableBinaryType) type;
    That's it !
    Everything goes good.
    Thanks
    Regards,

  • FPN Could not load or refresh node Tree creation failed on node: pcd:-Error

    Hi,
    I´m configuring a FPN using CRM Java as a producer and SAP Portal as a consumer, the SSO from SAP Portal to CRM Java is working fine, but we are having this Error when trying to Expand Content Administration > Portal Content > NetWeaver Content Producers > MyProducer System
    Could not load or refresh node Tree creation failed on node: pcd:NetWeaver_content_producers/........
    Also in Identity Management I can see the Federated Data Source but when search for roles no rol is retrieved and returns two messages.
    Last Search might be innacurate
    No element Found
    Has somebody faced this Error?
    Thanx in Advanced!
    Kind Regards,
    Gerardo J

    Hi KRISHNA,
    Check the below thread and notes mentioned in that
    Re: Tree creation failed on node: pcd:portal_content
    Koti Reddy

  • Pacman: could not remove entry from cache

    Hi,
    I've been getting "error: could not remove entry 'openbox' from cache" message while trying to uninstall openbox. Why?

    Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
    Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
    I never install system modifications myself, and I don't know how to uninstall them. You'll have to do your own research to find that information.
    Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmyrmac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button.
    You generally have to reboot in order to complete an uninstallation.
    If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
    You may be advised by others to try to remove complex system modifications by hunting for files by name, or by running "utilities" that purport to remove software. I don't give such advice. Those tactics often will not work and maymake the problem worse.

  • Object could not be found in cache, key is null!

    this is what I am getting when i tried to upload a file..the binary attribute is mapped to comp controller  attribute...
    I dont understand the exact meaning of this message...
    Please reply

    Hi Amit
    this is what I am doing.
    In my view controller, I have a fileData of binary type, is mapped to comp controller attribute.
    So when am calling compController.Populate() method from view doInit()...
    Populate method
    public void Populate( )
        //@@begin Populate()
      IWDAttributeInfo attInfo1 = wdContext.nodeSubmitElements().getNodeInfo().getAttribute (wdContext.currentSubmitElementsElement().INVOICE_DOC);
    ISimpleTypeModifiable type = attInfo1.getModifiableSimpleType();
    IWDModifiableBinaryType binaryType = (IWDModifiableBinaryType) type;
    //end
    I tried wdContext.createSubmitElementsElement().INVOICE_DOC also but still getting the same problem..
    -vd

  • CPALookupException: Could not find channel in CPA Cache in PI 7.3

    Hi,
    I am getting below error in PI 7.3 when  trying to send data from SOAP sender Adapter.
    com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.af.service.cpa.impl.exception.CPALookupException: Could not find channel in CPA Cache. Object ID: f3898d7d5ca3380a8aca739cc21b0cac. Cause: com.sap.aii.af.service.administration.api.monitoring.ChannelUnknownException: Channel was not found in CPA Cache: f3898d7d5ca3380a8aca739cc21b0cac due to: Got &lt;null> from CPA-cache.
    Steps
    1.) deleted Old communication channel and ICO and activated
    2.) Done full CPA Cache refresh
    3.)   Created communication Channel and ICO
    4.) Activated
    But when i checekd in communication channel i found above error.
    Regards,
    Anurag

    Hi all,
    has anybody found a good solution for this problem?
    We face the same problem over here, working with SOAP Sender Adapter (XI 3.0 Protocol) & Integrated Configuration on PI 7.3. The only thing that seems to help is to restart the Adapter Framework but that´s not an option on the production system.
    Best regards,
    Matthias

  • Getting "Could not Import Universe" error while trying to refresh a Report

    Hi,
    When we are trying to refresh a report in ZABO in production environment, we are getting an error "Could not import universe".
    We are able to import all other universes and refresh all other reports thru ZABO.
    Even these reports that are dependent on this universe are getting refreshed in Infoview and Full client. We are continuously facing this issue in ZABO.
    We tried the following steps but it did not fix the problem.
    1) Go to Tools -> Universes; Select the Universe to be imported and click on "Import" - Result: An error stating "Cannot find Universe".
    Click on "Refresh" button and then on "Import" again.
    Still the same error " Cannot find Universe"
    2) Click on "Data manager" after opening the report. Go to 'Definition' tab -> click on "..." - Result: "Cannot find Universe" error.
    3) Go to C:\Documents and Settings\<user name>\Application Data\Business Objects\Business Objects 6.0\lsi\
    Take a backup of .rkey and .lsi files of our gateway server and delete them from that location.Then relogin Infoview and ZABO.
    4)Go to Internet Options -> Temporary File Settings -> View Objects.
    Delete RptViewerAX class and ZaboCheckandRunControl class and relogin infoview and ZABO.
    5) Tried creating a new Document based on that Universe.
    6)Publish the universe with a different name and try creating a report based on that.
    None of these trials worked out. Please help us to fix this issue.
    Note: Our Production environment is reverse proxy enabled that has a time out set to 15 mins at webintelligence level. The Error is being observed with in 2 mins from the refresh process started.
    Regards
    Chaitanya

    Hi,
    Go to CMC, and check the path in file store where this Universe is stored.
    Follow this path and check if this universe is present there.
    If you have a local copy, you could open and export this by changing the name and try re-pointint one of the reports.
    If it works, you could delete the original and rename it to the original Universe.
    Regards,
    Jayendra.

  • Error occurred during initialization of VM Could not reserve enoughspace for code cache

    I receive this error in the ZENWSimport and Removal screen:
    Error occurred during initialization of VM
    Could not reserve enough space for code cache
    Server is a HP DL380G4, NWSBS SP5, 4 GB RAM.
    I think it's Java related, because iManager also stopped working (error
    503 - service unavailable)
    AUTOEXEC.BAT:
    @echo off
    prompt $p$g
    path=c:\dos
    rem mscdex /d:cpqcdrom /v /m:50 /l:f
    c:\dos\nlsfunc
    c:\dos\mode con cp PREPARE=((437) c:\dos\EGA.cpi)
    c:\dos\mode con cp Select=437
    cd \NWSERVER
    ## commented by MemCalc server -nl -u134217728
    server -nl -u134217728
    I tried removing the -u switch, but the server wouldn't even boot then.
    I'm out of options, can anyone help?
    Arjan Schepers

    Also, I reapplied Service Pack 5, didn't help. BTI.CFG looks like the
    following:
    ;* Copyright 1982-2001 Pervasive Software Inc. All Rights Reserved
    ;* Pervasive Software product initialization file for NetWare
    [Btrieve Communications Manager]
    MaxWorkerThreads=16
    MaxReceivePacketSize=1500
    Supported Protocols=TCPIP
    Listen IP Address=
    TCP/IP Multihomed=YES
    Enable AutoReconnect=NO
    AutoReconnect Timeout=180
    [MicroKernel]
    CacheSize=2048000
    Pervasive SQL 9SP2 is installed on this server for an application named
    MICROS RAS/KAS. It needs 2GB memory (*shrug*, I know), hence the 4GB memory.
    Arjan Schepers

  • Apple Configurator Could not refresh the ios update catalog

    I tried to open up apple configurator today and it's giving me an arror saying "Could not refresh the iOS update catalog. The store's response could not be parsed." I have no idea how to even start troubleshooting this. any tips?

    This is an annoying problem. I have phones and pads that I have to release for the Corporate world. I thought macs/apple were supposed to be perfect .
    Any Fixes or responses to this as a potential iTunes problem.
    Is this an iTunes to server conn problem or would this be a problem with the software to iTunes programming?

  • The specified cache entry could not be loaded during initialization

    The OBIEE server is failing every few minutes of working.
    I saw in the NQServer.log:
    The specified cache entry could not be loaded during initialization.
    Cache entry, '/home/oracleadmin/OracleBIData/cache/NQS_rprt_734086_39693_00000001.TBL', is invlaid due to either non-existing file name, size does not match, exceeding maximum space limit nor exceeding maximum entry limit, and it's been removed.
    I checked the directory and there is no space limitation.
    Can someone please clarify?
    The server/Config/NQSConfig.INI is as follows:
    [ CACHE ]
    ENABLE = YES;
    DATA_STORAGE_PATHS = "/home/oraceladmin/OracleBIData/cache" 2000 MB;
    MAX_ROWS_PER_CACHE_ENTRY = 100000; // 0 is unlimited size
    MAX_CACHE_ENTRY_SIZE = 1 MB;
    MAX_CACHE_ENTRIES = 1000;
    POPULATE_AGGREGATE_ROLLUP_HITS = NO;
    USE_ADVANCED_HIT_DETECTION = NO;
    MAX_SUBEXPR_SEARCH_DEPTH = 7;

    It's more than enough if you are using it for .tmp and .tbl files storage. Have you checked work_directory_path in NQSConfig.ini file .Is it on diffrent mount point.Usually we wil create a seperate mount point and use that as storage location.
    b. Instead of using SAPurgeAllCache() , can I add shell script which delete the files fromt the cache directory and the execute run-sa.sh?You need to understand diffrence between OBIEE rpd cache and .tbl and .tmp file. SAPurgeAllCache() will purge cache from RPD.It wont purge .tmp or .tbl files.These files will be stored in some physical location.When a report start executing .tmp file will start evoluting and after execution of report it will be purged by OBIEE server automatically.
    see this blog for some insight into this topic
    Re: TMP Files uneder /OracleBIData/tmp
    Regards,
    Sandeep

  • Could not initialize LDAP cache

    Hi,
    We are using the iplanet application server version 6.5 with iplanet directory server version 5.0 .
    We are facing the problem in the restart of application server since we have deployed an application. Here is some log on the same. Any help or advise is appreciated.
    When application server is running, we are finding it impossible to stop by using 'iascontrol stop' command. We are forced to use the command 'iascontrol kill'. Once it is stopped, when we try to start it, it gives the following messages in KJS logs.
    Connected to LDAP server on egovdevsrvr2.dubai-e.gov.ae port 389
    iPlanet Application Server is running in international mode
    Initializing LDAP cache from server egovdevsrvr2.dubai-e.gov.ae port 389
    Could not initialize LDAP cache from server egovdevsrvr2.dubai-e.gov.ae port 389: Success
    On the kas log it gives the following.
    [16/May/2003 20:04:21:5] error: ADMIN-071: kas> error: failed to either start up or connect to engine ''0'' (CCS0)
    [16/May/2003 20:05:17:6] error: ADMIN-071: kas> error: failed to either start up or connect to engine ''1'' (CCS0)
    [16/May/2003 20:06:13:8] error: ADMIN-071: kas> error: failed to either start up or connect to engine ''2'' (CCS0)
    [16/May/2003 20:06:13:8] info: ADMIN-030: kas> listening for connections..
    I am sure LDAP is running already.
    Now if I test any sample applications, likfe fortune and Hello World, they work fine. But a particular application fails with the following message at the KJS logs.
    ava.lang.IllegalStateException: internal assert: Why is the servlet GDS key for: {03c1437d-f21a-1c38-941e-0003ba084dc6
    } = null?
    at com.kivasoft.util.Debug.assert(Unknown Source)
    at com.netscape.server.deployment.WebAppCompGDSUtil.getServletFromGDS(Unknown Source)
    at com.netscape.server.deployment.DescriptorManager.getServletByGuidStr(Unknown Source)
    at com.netscape.server.deployment.WebAppDescriptor.getServletFromGDSorCache(Unknown Source)
    at com.netscape.server.deployment.WebAppDescriptor.getServlet(Unknown Source)
    at com.netscape.server.deployment.WebAppDescriptor.getAllServlets(Unknown Source)
    at com.netscape.server.servlet.servletrunner.AppInfo.resetServlets(Unknown Source)
    at com.netscape.server.servlet.servletrunner.AppInfo.<init>(Unknown Source)
    at com.netscape.server.servlet.servletrunner.ServletModule.getAppInfo(Unknown Source)
    at com.netscape.server.servlet.servletrunner.ServletRunner.getAppInfo(Unknown Source)
    at com.netscape.server.servlet.servletrunner.StaticServlet.service(Unknown Source)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.netscape.server.servlet.servletrunner.ServletInfo.service(Unknown Source)
    at com.netscape.server.servlet.servletrunner.ServletRunner.execute(Unknown Source)
    at com.kivasoft.applogic.AppLogic.execute(Unknown Source)
    at com.kivasoft.applogic.AppLogic.execute(Unknown Source)
    at com.kivasoft.thread.ThreadBasic.run(Native Method)
    at java.lang.Thread.run(Thread.java:484)
    What is this cache initialization that happens at the startup of ias? Is it anything related to server settings? I remember, some times when the ias starts with a successful cache initialization message, I find this application to be working fine.
    Please help.

    Hi,
    We are using the iplanet application server version 6.5 with iplanet directory server version 5.0 .
    We are facing the problem in the restart of application server since we have deployed an application. Here is some log on the same. Any help or advise is appreciated.
    When application server is running, we are finding it impossible to stop by using 'iascontrol stop' command. We are forced to use the command 'iascontrol kill'. Once it is stopped, when we try to start it, it gives the following messages in KJS logs.
    Connected to LDAP server on egovdevsrvr2.dubai-e.gov.ae port 389
    iPlanet Application Server is running in international mode
    Initializing LDAP cache from server egovdevsrvr2.dubai-e.gov.ae port 389
    Could not initialize LDAP cache from server egovdevsrvr2.dubai-e.gov.ae port 389: Success
    On the kas log it gives the following.
    [16/May/2003 20:04:21:5] error: ADMIN-071: kas> error: failed to either start up or connect to engine ''0'' (CCS0)
    [16/May/2003 20:05:17:6] error: ADMIN-071: kas> error: failed to either start up or connect to engine ''1'' (CCS0)
    [16/May/2003 20:06:13:8] error: ADMIN-071: kas> error: failed to either start up or connect to engine ''2'' (CCS0)
    [16/May/2003 20:06:13:8] info: ADMIN-030: kas> listening for connections..
    I am sure LDAP is running already.
    Now if I test any sample applications, likfe fortune and Hello World, they work fine. But a particular application fails with the following message at the KJS logs.
    ava.lang.IllegalStateException: internal assert: Why is the servlet GDS key for: {03c1437d-f21a-1c38-941e-0003ba084dc6
    } = null?
    at com.kivasoft.util.Debug.assert(Unknown Source)
    at com.netscape.server.deployment.WebAppCompGDSUtil.getServletFromGDS(Unknown Source)
    at com.netscape.server.deployment.DescriptorManager.getServletByGuidStr(Unknown Source)
    at com.netscape.server.deployment.WebAppDescriptor.getServletFromGDSorCache(Unknown Source)
    at com.netscape.server.deployment.WebAppDescriptor.getServlet(Unknown Source)
    at com.netscape.server.deployment.WebAppDescriptor.getAllServlets(Unknown Source)
    at com.netscape.server.servlet.servletrunner.AppInfo.resetServlets(Unknown Source)
    at com.netscape.server.servlet.servletrunner.AppInfo.<init>(Unknown Source)
    at com.netscape.server.servlet.servletrunner.ServletModule.getAppInfo(Unknown Source)
    at com.netscape.server.servlet.servletrunner.ServletRunner.getAppInfo(Unknown Source)
    at com.netscape.server.servlet.servletrunner.StaticServlet.service(Unknown Source)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.netscape.server.servlet.servletrunner.ServletInfo.service(Unknown Source)
    at com.netscape.server.servlet.servletrunner.ServletRunner.execute(Unknown Source)
    at com.kivasoft.applogic.AppLogic.execute(Unknown Source)
    at com.kivasoft.applogic.AppLogic.execute(Unknown Source)
    at com.kivasoft.thread.ThreadBasic.run(Native Method)
    at java.lang.Thread.run(Thread.java:484)
    What is this cache initialization that happens at the startup of ias? Is it anything related to server settings? I remember, some times when the ias starts with a successful cache initialization message, I find this application to be working fine.
    Please help.

Maybe you are looking for

  • How do I remove my credit card form my account?

    How do i remove my credit card from my account? iTunes won't accept it saying the security code is "invalid." Please, i just want to remove so that i can download stuff.

  • How to update open PO price based on Price date category in contract?

    I've created a contract/ outline agreement with Price date category as '2'- Delivery date. (Path is Item details> More Functions> Additional Data). This means that PO price should be determined based on its delivery date. In contract, there are two d

  • Is it possible to insert a simcard into macbook? Not 3g, oldest kind of simcards.

    I don't want to call via a phone. I prefer making calls via computers cause their keys and screen are bigger. My mobile operator provided me with an unlimited tarif. So, is it possible to use a macbook as a phone, that is to insert a sim card into it

  • Classloader/Servlet engine problems

    I am running across a problem that I believe is related to the Classloaders being used. If a class in the application server classpath references classes that are loaded by an individual web application, I get a ClassNotFoundException. From what I un

  • Does EAP/SIM make sense for others than mobile operators?

    Hi, I'm wondering about the many different EAP authentication protocols. One of these is EAP/SIM (initiated by Nokia). I think the advantage of this authentication method might be the kind of key exchange. Users are familiar in using SIM-cards. Out o