Could not archive file after processing.
All,
I'm doing simple File-File sceanario.I'm using NFS.But I'm getting the following error in sender communication channel monitoring.
Error: com.sap.aii.af.service.util.transaction.api.TxManagerException: Unable to commit transaction: The transaction has been rolled back: com.sap.engine.services.ts.transaction.TxRollbackException
Could not archive file "sample.txt" after processing
Note: The folder has full rights of read/write.
Can some one please help me to resolve this issue.
Thanks.
Hi Michal,
Thanks for the quick reply.I'm seeing this error in Production environment.So i cannot try as you suggested.
It was working until yesterday .I checked with BASIS team aswell for the folder access , Everything is OK .
Is there any other way i can check to resolve this?
Thanks
Similar Messages
-
Could not archieve file after processing error in Rwb of sender adapter
Till today afternoon it is running fine.
The rpocess here is we will keep the files in FTP site. and pi polls and places the files in NFS Mount server AL11(FILE/STAGING).
Now these file will be process from FILE/STAGING to FILE/PROCESS in al11 .
Then proxy get trigerred and sends the data to sap where workflow will be trigerred.
now the issues file is getting polled from ftp and placed in file/staging folder perfectly.
Then the file needs to be moved to file/process folder using file adapter. here the issue is coming
error is as shown below
Time Stamp Message ID Explanation
Could not archive file '/FILE/Staging/20100517112845_140011140001.tif' after processing
com.sap.aii.af.service.util.transaction.api.TxManagerException: Unable to commit transaction: The transaction has been rolled back: com.sap.engine.services.ts.transaction.TxRollbackException
I had done the cache refresh still the problem persists.HI,
1. check whether you have authorization for write access.
2. Check the path provided for process.
3. Ensure both the staging and the process paths are different.
Thanks, -
Could'nt delete file after processing sender file in windows environment ?
Hi,
I have problem with sender file adapter in windows 2003 server, because the file adapter cannot delete the file after processing, seems like permission problem. but then i have set full controll access to the pi7adm (sap instance admin). but the problem still persist.
Please advise, me.
Thank you and Best Regards
FernandHi,
Of course i set delete option in my CC sender, but the fail adapter couldn delete fail without any reason ?
This is the error message from RWB Could not delete file 'K:\WORKDIR\FTP\data\data1.fer1' after processing.
like i mention before i have set full access to sap admin user to the directory. but the error still persist.
any idea.
Cheers
Fernand -
Could not save file after changes
Hi there,
There is a common server where all designers can access each others' file but, there is this work station that would not allow us to override the previous file, nor save a new name in that folder. Message says "Cannot save the document. It may be opened by other applications. Close applications and try again. You may also use saveas to save it into a new document." Tried but didn't work.
Strange thing is, no other application is opened with that file. I also noticed that at the bottom left corner, there is a "pencil being crossed" icon. I figured it's the "no privileges to access" icon. But the designer did not lock the file at all. Then, how is it possible to deny saving?
Anyway to get rid of the little icon? Only the designer who created the original file can access, no one else can.
Is that server problem or there is something that need to be set in the original designer workstation.
Thank you for your help,
onthedotIt really does sound like a server-side issue rather than workstation, and as such I'd think your system administrator needs to look at the problem and see what's going on with file ownership and access rights.
I run a W2K server in one network, with a number of Macs (and PCs) connected, and the only time I see any error of the sort you describe is if the file is already open on another system, or access rights are set to read only, not read/write. -
File adapter - archiving files after successful processing & errors
Hi All
In sender file adapter, I understand that we can archive files after processing them.
After successful processing, we can archive the file, and if there are any errors, we can archive the file in a different folder (all files resulting in errors during processing are archived in a seperate folder).
Now, see this scenario.
My file is successfully picked up, processed and posted to receiving sap system thru proxy.
But, if there is any application specific error (ex: duplicate id), because of which this data cannot be processed in the receiving system, how can i move the file which is archived in successful messages folder to the folder where we archive error messages?
Is it possible?
This is required because, when there are these kind of errors with incorrect data, we want the corresponding file to be archived in the folder where erred files are archived.
Please let me know how we can achieve this.
Many Thanks
Chandrain file sender CC, thr is option to archive and error file store also..
1)under processing mode - archive.. give the path thr..
2) To archive source files where a permanent error occurred during processing, select Archive Faulty Source Files
http://help.sap.com/saphelp_nwpi71/helpdata/en/44/658abd344a4de0e10000000a1553f7/frameset.htm -
ERROR:Could not read archive file - during Processing Base System Part 2
Hi there,
What I have:
* I have problem with installation of the Mac OS X Panther v10.3 on iMac.
* I have 3 original CDs (black with silver X).
What I did:
* I made new 1 partition and formated disk as Mac OS Extended (Journaled) over the Disk Utility in the first CD as normal without additional options (if I tried to format disk with zero all data and 8 way random write format after 3 days computer freeze)
* I verified disk over this utility - that was ok - HFS volume verifed.
* Then I restarted the computer and ran installation from this first CD
What happened:
* installation did not finish, because there were some problems during installation process.
* i tried to customize installation just for essential work (without other languages support, printers etc), but it was still the same problem
Installation log:
After I choosed installation type, there was first error, but it did not look like important.. - root: bootstraplookup(): unknown error code
Checking your installation disk - OK
Preparing disk - OK
Preparing base 1 and 2 - OK
Other preparing.. - OK
Processing Base System Part 1 - OK
Processing Base System Part 2
==
ERROR:Could not read archive file. - pax: Invalid header, starting valid header search.
ERROR:Could not read archive file. - pax: Invalid header, starting valid header search.
last message repeated 2 times
ERROR:Could not write file. - pax: WARNING! These patterns were not matched:
Some files for Essentials may not have been writen correctly.
root: Installer[108] Exception raised during posting of notification. Ignored. exception: Some files for Essentials may not have been written correctly. (code 1)
Install Failed
Error detected
Name: NSGenericException
Reason: Some files for Essentials may not nave been written correctly. (code 1)
==
It seems like a problem with reading some data from the CD, but during the installation checking of disk was ok.. maybe it can be problem with the cd-rom..? Or problem with data on cd-rom - I mean bad archive file..? But it is original CD.. What do you think??
Thank you!Tomas,
On THIS Page, locate your iMac model.
From the Documents column, click on the appropriate number link.
Using the info in the document that opens, locate the serial number of your iMac.
On THIS Page, in the text field for Search Tech Specs, enter that serial number.
Click on the model of iMac that appears.
Post a link to the page that opens, or post the info requested below.
Exactly which model iMac is it?
What is the Processor speed?
What size is the Hard Drive?
How much Memory is installed?
What type of internal Optical Drive does it have?
Which version of OS, was the original Installed Software?
ali b -
Archived PDF could not be opened after downloaded to PC
Hi
I am using FM ARCHIVOBJECT_GET_TABLE to get archived PDF into internal table and then using METHOD CL_GUI_FRONTEND_SERVICES=>GUI_DOWNLOAD to download this to PC.
Now when I try to open this PDF, it gives some error. Error reads
Adobe reader could not open "file.pdf" because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)
This was working fine in non unicode 4.7 system, but is not working after upgrade to unicode ECC 6.0 system.
The code is as follows,
* Get document from archive
CALL FUNCTION 'ARCHIVOBJECT_GET_TABLE'
EXPORTING
ARCHIV_ID = l_archiv_id
DOCUMENT_TYPE = l_document_type
ARCHIV_DOC_ID = l_archiv_doc_id
IMPORTING
LENGTH = l_sapb_length
TABLES
ARCHIVOBJECT = lt_tab
EXCEPTIONS
ERROR_ARCHIV = 1
ERROR_COMMUNICATIONTABLE = 2
ERROR_KERNEL = 3
OTHERS = 4.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>GUI_DOWNLOAD
EXPORTING
BIN_FILESIZE = l_length
FILENAME = l_filename
FILETYPE = l_filetype
CHANGING
DATA_TAB = lt_tab
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
Do we have to change any parameters or anything for unicode system?Is the filetype declared as 'BIN' in download?
-
I am trying to install Arch but when I type "pacstrap /mnt base base-devel" I keep on getting this error "error could not open file /var/lib/pacman/sync/core.db unrecognized archive format".
I have tried:
# rm -R /var/lib/pacman/sync/
# pacman -Syuf
I have also tried pacman -Syy with no luck.
What more is there to do besides installing ubuntu?
Last edited by johane (2012-08-11 08:22:07)johane wrote:
I am trying to install Arch but when I type "pacstrap /mnt base base-devel" I keep on getting this error "error could not open file /var/lib/pacman/sync/core.db unrecognized archive format".
I have tried:
# rm -R /var/lib/pacman/sync/
Pacstrap was telling you it couldn't open a file, so you just deleted the entire directory tree? Did it appear to be downloading the database files correctly before this? Did you try running pacstrap again after you deleted everything?
And then you tried to run pacman with the -f (force) option? What happened? "no luck" doesn't tell us anything.
What more is there to do besides installing ubuntu?
There are many things you can do. You can give us more information about what you did and what happened. Did you follow all the steps in the Beginners Guide up to the pacstrap step? Did you get any errors or warnings before that step? Are you sure you had a working network connection? Did you interrupt the pacstrap process at any time? Did you try running it again after you deleted /var/lib/pacman/sync?
Did you check the sha1sum of the iso you downloaded before you put it on a usb stick?
https://wiki.archlinux.org/index.php/Be … oaded_file
How did you put it on the usb stick?
When you got the error, did you do
ls /var/lib/pacman/sync
to see what (if anything) was there?
Last edited by 2ManyDogs (2012-08-06 23:38:27) -
InfoSpoke fails with message "Could not open file on application server"
BW Experts,
I created an InfoSpoke that is configured to extract to a flat file. The name of the file is specified using a logical filename. During extraction, the infospoke reports the error message "Could not open file on application server" adnd marks the extraction process as red(failed). I have tried to run the InfoSpoke in background mode and in dialog mode and the same error appears. After i run in dialog mode, i checked SU53 for authorization errors and did not find any. I also tried changing the Logical filename setup in transaction FILE to a more "friendly" directory in which i'm sure i have authorizations (e.g. my UNIX home directory) and im still getting errors.
Can you please share your thoughts on this? Any help will greatly appreciated. I also promise to award points.Hi Nagesh,
Thanks for helping out.
If i configure the InfoSpoke to download to a file using "File Name" option and also check the "Application server" checkbox, the extract works correctly (extraction to the defualt SAP path and filename=infospoke name). If i configure the InfoSpoke to download to the local workstation, the InfoSpoke also works correctly. It's only when i configure it to download to the application server and use the "Logical filename" option, that i encounter a failed extract.
Here are the messages is the Open Hub Monitor:
(red icon) Request No.147515
0 Data Records
Runtime 1 sec.
(red icon)Run No. 1
0 Data Records
Runtime 1 sec.
Messages for Run
Extraction is running RSBO 305
Could not open file on application server RSBO 214
Request 147515 was terminated before extraction RSBO 326
Request 1475151: Error occured RSBO 322
If i clink on the error message, no messages nor clues are displayed. Note, this is a new InfoSpoke that is currently in the dev system.
Please help. -
This was all working yesterday, but this morning, I cannot run in the dev fabric, or even setting the website project as a startup project directly, I get the following error:
Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.BadImageFormatException: Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Assembly Load Trace: The following information can be helpful to determine why the assembly 'msshrtmi' could not be loaded.
=== Pre-bind state information ===
LOG: User = Andrew-VAIO\Andrew
LOG: DisplayName = msshrtmi
(Partial)
WRN: Partial binding information was supplied for an assembly:
WRN: Assembly Name: msshrtmi | Domain ID: 3
WRN: A partial bind occurs when only part of the assembly display name is provided.
WRN: This might result in the binder loading an incorrect assembly.
WRN: It is recommended to provide a fully specified textual identity for the assembly,
WRN: that consists of the simple name, version, culture, and public key token.
WRN: See whitepaper http://go.microsoft.com/fwlink/?LinkId=109270 for more information and common solutions to this issue.
LOG: Appbase = file:///C:/Users/Andrew/Desktop/Beko2011Azure/Website/
LOG: Initial PrivatePath = C:\Users\Andrew\Desktop\Beko2011Azure\Website\bin
Calling assembly : (Unknown).
===
LOG: This bind starts in default load context.
LOG: Using application configuration file: C:\Users\Andrew\Desktop\Beko2011Azure\Website\web.config
LOG: Using host configuration file:
LOG: Using machine configuration file from C:\Windows\Microsoft.NET\Framework\v4.0.30319\config\machine.config.
LOG: Policy not being applied to reference at this time (private, custom, partial, or location-based assembly bind).
LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/Temporary ASP.NET Files/root/cb955b02/eef106e2/msshrtmi.DLL.
LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/Temporary ASP.NET Files/root/cb955b02/eef106e2/msshrtmi/msshrtmi.DLL.
LOG: Attempting download of new URL file:///C:/Users/Andrew/Desktop/Beko2011Azure/Website/bin/msshrtmi.DLL.
ERR: Failed to complete setup of assembly (hr = 0x8007000b). Probing terminated.
Stack Trace:
[BadImageFormatException: Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.]
System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks) +0
System.Reflection.RuntimeAssembly.nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks) +39
System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection, Boolean suppressSecurityChecks) +132
System.Reflection.RuntimeAssembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +144
System.Reflection.Assembly.Load(String assemblyString) +28
System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +46
[ConfigurationErrorsException: Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.]
System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +618
System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory() +209
System.Web.Configuration.CompilationSection.LoadAssembly(AssemblyInfo ai) +130
System.Web.Compilation.BuildManager.GetReferencedAssemblies(CompilationSection compConfig) +178
System.Web.Compilation.BuildManager.GetPreStartInitMethodsFromReferencedAssemblies() +94
System.Web.Compilation.BuildManager.CallPreStartInitMethods() +332
System.Web.Hosting.HostingEnvironment.Initialize(ApplicationManager appManager, IApplicationHost appHost, IConfigMapPathFactory configMapPathFactory, HostingEnvironmentParameters hostingParameters, PolicyLevel policyLevel, Exception appDomainCreationException) +677
[HttpException (0x80004005): Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.]
System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +9079228
System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +97
System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr) +258
Note that the dev machine is x64 Win7.
I have not tried deploying this to staging since the issue started as I'm a bit nervous of touching the staging/live environment until this is solved.
Removing the PlatformTarget element from the project file has no effect
Removing the msshrtmi.dll file from the bin directory of the website project ends up with
'Could not load file or assembly 'Microsoft.WindowsFabric.Common, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified'
I have used Git to revert to the last working build to no effect (But I don't have the obj/bin folders in GIT), but it has atleast reset the project files etc.
If I return msshrtmi.dll to the bin folder and switch the model and website projects to x64 there is no change
If I switch both to x86 then I get an error Could not load file or assembly 'BekoModel2011' or one of its dependencies. An attempt was made to load a program with an incorrect format.
which is the model project - presumably because to run on my x64 machine I need the 64bit version?
I really need to be able to debug and then publish some changes ASAP.
AndrewHi,
Is it true that you're using IIS to host the application? Could you check whether the process is x64 or x86 one via task manager or config in IIS manager?
http://blogs.msdn.com/b/rakkimk/archive/2007/11/03/iis7-running-32-bit-and-64-bit-asp-net-versions-at-the-same-time-on-different-worker-processes.aspx
Allen Chen [MSFT]
MSDN Community Support | Feedback to us
Get or Request Code Sample from Microsoft
Please remember to mark the replies as answers if they help and unmark them if they provide no help. -
Parser Error Message: Could not load file or assembly 'Oracle.DataAccess, V
I'm working on a 64 bit windows 7 ultimate system and I can't get the Oracle.DataAccess and Oracle.Web to load on the helloworld web page
See error below. At the very end i have the gacutil output. Also, the same dll's work on a 32 bit windows 7 system. I've also tried to load the beta version of the odac 64 bit
but it it gets a "java stopped working error"
Thanks in advance
WEB PAGE ERRORVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVV
Server Error in '/test/helloworld' Application.
Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: Could not load file or assembly 'Oracle.DataAccess, Version=2.112.1.1, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The system cannot find the file specified.
Source Error:
Line 37: <add assembly="System.Xml.Linq, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
Line 38: <add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
Line 39: <add assembly="Oracle.DataAccess, Version=2.112.1.1, Culture=neutral, PublicKeyToken=89B483F429C47342"/>
Line 40: <add assembly="Oracle.Web, Version=2.112.1.1, Culture=neutral, PublicKeyToken=89B483F429C47342"/></assemblies>
Line 41: </compilation>
Source File: C:\inetpub\wwwroot\test\helloworld\web.config Line: 39
Assembly Load Trace: The following information can be helpful to determine why the assembly 'Oracle.DataAccess, Version=2.112.1.1, Culture=neutral, PublicKeyToken=89b483f429c47342' could not be loaded.
=== Pre-bind state information ===
LOG: User = IIS APPPOOL\DefaultAppPool
LOG: DisplayName = Oracle.DataAccess, Version=2.112.1.1, Culture=neutral, PublicKeyToken=89b483f429c47342
(Fully-specified)
LOG: Appbase = file:///C:/inetpub/wwwroot/test/helloworld/
LOG: Initial PrivatePath = C:\inetpub\wwwroot\test\helloworld\bin
Calling assembly : (Unknown).
===
LOG: This bind starts in default load context.
LOG: Using application configuration file: C:\inetpub\wwwroot\test\helloworld\web.config
LOG: Using host configuration file: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\Aspnet.config
LOG: Using machine configuration file from C:\Windows\Microsoft.NET\Framework64\v2.0.50727\config\machine.config.
LOG: Post-policy reference: Oracle.DataAccess, Version=2.112.1.1, Culture=neutral, PublicKeyToken=89b483f429c47342
LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/Temporary ASP.NET Files/test_helloworld/480589f5/895d06ab/Oracle.DataAccess.DLL.
LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/Temporary ASP.NET Files/test_helloworld/480589f5/895d06ab/Oracle.DataAccess/Oracle.DataAccess.DLL.
LOG: Attempting download of new URL file:///C:/inetpub/wwwroot/test/helloworld/bin/Oracle.DataAccess.DLL.
LOG: Attempting download of new URL file:///C:/inetpub/wwwroot/test/helloworld/bin/Oracle.DataAccess/Oracle.DataAccess.DLL.
LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/Temporary ASP.NET Files/test_helloworld/480589f5/895d06ab/Oracle.DataAccess.EXE.
LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/Temporary ASP.NET Files/test_helloworld/480589f5/895d06ab/Oracle.DataAccess/Oracle.DataAccess.EXE.
LOG: Attempting download of new URL file:///C:/inetpub/wwwroot/test/helloworld/bin/Oracle.DataAccess.EXE.
LOG: Attempting download of new URL file:///C:/inetpub/wwwroot/test/helloworld/bin/Oracle.DataAccess/Oracle.DataAccess.EXE.
Version Information: Microsoft .NET Framework Version:2.0.50727.4927; ASP.NET Version:2.0.50727.4927
gacuil output
VVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVV
C:\Users\Administrator>C:\"Program Files"\"Microsoft SDKs"\Windows\v6.0A\Bin\x64
\gacutil.exe /l Oracle.DataAccess
Microsoft (R) .NET Global Assembly Cache Utility. Version 3.5.21022.8
Copyright (c) Microsoft Corporation. All rights reserved.
The Global Assembly Cache contains the following assemblies:
Oracle.DataAccess, Version=2.112.1.1, Culture=neutral, PublicKeyToken=89b483f4
29c47342, processorArchitecture=x86
Edited by: burk_s on Jun 6, 2010 2:42 PMHi Mubarak,
Please firstly make sure you installed SharePoint Foundation 2010 with SP2 in a Windows Server 2012 R2. Since only SP2 slipstream installations are supported on Windows Server 2012 R2
http://blogs.technet.com/b/stefan_gossner/archive/2014/05/03/sharepoint-2010-sp2-and-windows-server-2012-r2.aspx
http://blogs.technet.com/b/stefan_gossner/archive/2013/09/19/slipstream-version-of-sharepoint-foundation-2010-with-sp2-included.aspx
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
===========================================================
This is a SQL Server 2012 Developer Edition of SSRS.
I am getting this error when navigating to http://servername/Reports. The reports site was working fine, until I installed a SQL 2014 Developer instance (including SSRS) on the same server.
I can still get to the http://servername/ReportServer site.
Neither of these are using Sharepoint.
Any help resolving this issue would be greatly appreciated.
Below is the stack trace.
===========================================================
[FileLoadException: Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)] System.Reflection.Assembly._nLoad(AssemblyName
fileName, String codeBase, Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection) +0 System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef, Evidence assemblySecurity,
StackCrawlMark& stackMark, Boolean forIntrospection) +416 System.Reflection.Assembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +166 System.Reflection.Assembly.Load(String
assemblyString) +35 System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +190 [ConfigurationErrorsException: Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel'
or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)] System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +1149
System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory() +323 System.Web.Configuration.CompilationSection.LoadAssembly(AssemblyInfo ai) +116 System.Web.Configuration.AssemblyInfo.get_AssemblyInternal() +36 System.Web.Compilation.BuildManager.GetReferencedAssemblies(CompilationSection
compConfig) +212 System.Web.Compilation.WebDirectoryBatchCompiler..ctor(VirtualDirectory vdir) +174 System.Web.Compilation.BuildManager.BatchCompileWebDirectoryInternal(VirtualDirectory vdir, Boolean ignoreErrors) +57 System.Web.Compilation.BuildManager.CompileWebFile(VirtualPath
virtualPath) +295 System.Web.Compilation.BuildManager.GetVPathBuildResultInternal(VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile) +482 System.Web.Compilation.BuildManager.GetVPathBuildResultWithNoAssert(HttpContext
context, VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile) +108 System.Web.Compilation.BuildManager.GetVirtualPathObjectFactory(VirtualPath virtualPath, HttpContext context, Boolean allowCrossApp, Boolean
noAssert) +171 System.Web.Compilation.BuildManager.CreateInstanceFromVirtualPath(VirtualPath virtualPath, Type requiredBaseType, HttpContext context, Boolean allowCrossApp, Boolean noAssert) +52 System.Web.UI.PageHandlerFactory.GetHandlerHelper(HttpContext
context, String requestType, VirtualPath virtualPath, String physicalPath) +53 System.Web.HttpApplication.MapHttpHandler(HttpContext context, String requestType, VirtualPath path, String pathTranslated, Boolean useAppConfig) +519 System.Web.MapHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
+176 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +274
===========================================================Hi Glen,
"The located assembly's manifest definition does not match the assembly reference." is generally caused by the loaded assembly's version is different than the expected version application refers to.
In this case, it should be caused by:
While starting Report Manager, the backend process ReportingServiceService need to load assemblies it refers to
ReportingServiceService reads the compilation/assemblies element from web.config(under Report Manager virtual patch)
If the compilation/assemblies is not existing, ReportingServiceService loads all assemblies from Bin folder. It can be verified from call stack System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory(). ReportingServiceService
uses System.Reflection.Assembly.Load with the assemblies' name only to load assemblies.
The Assembly.Load tries to load from the specify assembly by name from GAC at first. If it is found from GAC, it won't be loaded from Bin folder any more.
Since Reporting Service SharePoint Integration mode is installed, a same assembly of 'Microsoft.ReportingServices.SharePoint.ObjectModel' with different version might be installed to the GAC. That causes the error "The located assembly's manifest definition
does not match the assembly reference."
For more information about the error message and the loading process, please see:
http://blogs.msdn.com/b/junfeng/archive/2004/03/25/95826.aspx
https://msdn.microsoft.com/en-us/library/yx7xezcf(v=vs.100).aspx
Thanks,
Jinchun Chen -
I am trying to use SQL Server 2008 Developer on Windows Server 2008. Whenever I try to connect to the server, I get this error: "Could not load file or assembly 'Microsoft.SqlServer.Diagnostics.STrace, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91'
or one of its dependencies. The system cannot find the file specified."
I found some info at
http://blogs.msdn.com/b/ashishme/archive/2009/08/15/could-not-load-file-or-assembly-microsoft-sqlserver-diagnostics-strace-version-10-0-0-0-culture-neutral-publickeytoken-89845dcd8080cc91-or-one-of-its-dependencies-the-system-cannot-find-the-file-specified.aspx,
but this didn't help me because it is not on my system, even after reinstalling both SQL Server and .NET Framework 4. I also saw a this page: http://social.msdn.microsoft.com/Forums/en-US/sqltools/thread/1115cd55-721d-4974-99b1-d142d1e6a927,
but this also didn't fix my problem.
What can I do, or where can I get the missing assembley?
Thanks in advance.You can get the missing assembly (Microsoft.SqlServer.Diagnostics.STrace.dll)
by installing the "Shared Features" of SQL Server 2008.
You could only install SQL Server 2008
R2 (any edition) on Windows 7.
Do not install more than 1 SQL Server 2008 R2 edition
into the same computer; Some of the components are not compatible.
E.g: BIDS from R2 Express Advance edition cannot
recognize Integration Service from R2 Enterprise Trial edition - it would throw above missing dll error. -
Failed to delete file after processing FTP
Failed to delete file after processing. The FTP server returned the following error message: 'com.sap.ai i.adapter.file.ftp.FTPEx: 550 Unexpected reply code *.txt: The process cannot access the file because it is being used by another process. '. For details, contact your FTP server vendor.
I got this error many times for the same interface. Not sure what is the reason for this.
Searched on internet go comments that this is because of FTP version!
Please helpIt is the "Msecs to Wait Before Modification Check" in the Sender Adapter that ensures this. It works like this: PI starts processing, finds a file, then waits the number of miliseconds specified and checks the file again to see if it has changed over the waiting period. If so, then it waits again to make sure the file is written completely. Only if no changes took place over the waiting period, it starts processing the file.
And the fact that your file was successfully processed at retry only confirms that it might have been still written to by the sender system. You can try comparing file's creation timestamp (in OS level) with its processing start time in PI - this could prove me right.
Edited by: Grzegorz Glowacki on Jan 13, 2012 2:15 PM -
Dispatcher yellow,J2EE status info unavailable,Could not get file from DB
Hello Experts,
I have successfully installed a ECC 6.0 server-ABAP +JAVA system (DB2 v9.5 FP4 windows server 2008-x64 bit).
Kernel: 700 , Patch: 185 ; SP level : rel 700 , level 17
I upgraded JSPM sucessfully from 14 to 17.Then i was trying to apply JAVA sp's one by one using single sp option JSPM tool.
I DEPLOYED the first sp component sucesfully but after that the next component gave warning in JSPM check that SDM is not started.
I checked MMC.Dispatcher was YELLOW and J2EE status info unavailable. Cannot use JCMON to start SDM..option 20 gives error--cannot access shared memory
I already tried Notes 784568 and 997510
Relevant logs:-
jvm_bootstrap.out
=================================================================================================
Error synchronizing file [.\..\os_libs\FontManagerService_native.zip].
com.sap.engine.frame.core.configuration.InvalidPersistentDataStreamException: Could not get file from DB.
Attempt to fully materialize lob data that is too large for the JVM.
Disable data source property "fullyMaterializeLobData" for locator-based lob implementation. ERRORCODE=-4499, SQLSTATE=null ERRORCODE=-4499, SQLSTATE=null
Exception occurred:
com.sap.engine.bootstrap.SynchronizationException: Unable to synchronize native files for instance [ID140026]!
==============================================================================================
dev_jcontrol
=============================================================================================
Thr 4360] *** ERROR => JsfOpenShm: FtInit(SESSION, 2, 176) failed (got (rc = 0 operation successful), expected (rc = 8 already initialized)) [jsfxxshm.c 913]
[Thr 4360] *** ERROR => Can't create shared memory segment 69 (rc = 1) [jcntrxx.c 1749]
[Thr 4360] *** ERROR => Can't initialize JControl Administration [jcntrxx.c 273]
[Thr 4360] JControlCloseProgram: started (exitcode = -1)
[Thr 4360] *** ERROR => JsfCloseShm: FiDetachIndex(SESSION) failed (rc = 6 invalid argument) [jsfxxshm.c 1243]
[Thr 4360] *** ERROR => JsfCloseShm: FiDetachIndex(ALIAS) failed (rc = 6 invalid argument) [jsfxxshm.c 1250]
[Thr 4360] *** ERROR => JsfCloseShm: FiDetachIndex(SERVICE) failed (rc = 6 invalid argument) [jsfxxshm.c 1257]
=================================================================================================
log_bootstrap_ID0140026.0
==========================================================================================
Error synchronizing file [.\..\os_libs\FontManagerService_native.zip].
com.sap.engine.frame.core.configuration.InvalidPersistentDataStreamException: Could not get file from DB.
============================================================================================
Eagerly looking forward to a solution from you experts..
Thanks,
RakeshHi,
I am facing the same related problem with ECC 6.0.
My dispatcher started it is showing yellow- dialog queue standstill, J2EE status info unavailable
after some time dispatcher has stopped.
Please check my below trace file for dispatcher:
trc file: "dev_disp", trc level: 1, release: "700"
sysno 03
sid DEV
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 114
intno 20050900
make: multithreaded, Unicode, optimized
pid 13108
Fri Nov 27 02:31:55 2009
kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (03 13108) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 114 successfully loaded
shared lib "dw_xtc.dll" version 114 successfully loaded
shared lib "dw_stl.dll" version 114 successfully loaded
shared lib "dw_gui.dll" version 114 successfully loaded
shared lib "dw_mdm.dll" version 114 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3903
Fri Nov 27 02:31:59 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5361]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >sapdev_DEV_03 <
DpShMCreate: sizeof(wp_adm) 15800 (1436)
DpShMCreate: sizeof(tm_adm) 4232256 (21056)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1536)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 08290040, size: 4889440)
DpShMCreate: allocated sys_adm at 08290040
DpShMCreate: allocated wp_adm at 08292090
DpShMCreate: allocated tm_adm_list at 08295E48
DpShMCreate: allocated tm_adm at 08295E78
DpShMCreate: allocated wp_ca_adm at 0869F2B8
DpShMCreate: allocated appc_ca_adm at 086A5078
DpShMCreate: allocated comm_adm at 086A6FB8
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 08727E78
DpShMCreate: allocated gw_adm at 08727EB8
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 08727EE8
DpShMCreate: allocated wall_adm at 08727EF0
MBUF state OFF
DpCommInitTable: init table for 500 entries
Fri Nov 27 02:32:00 2009
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 1023 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 13356
argv[0] = D:\usr\sap\DEV\DVEBMGS03\exe\jcontrol.EXE
argv[1] = D:\usr\sap\DEV\DVEBMGS03\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS03_sapdev
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=2919
argv[5] = -DSAPSYSTEM=03
argv[6] = -DSAPSYSTEMNAME=DEV
argv[7] = -DSAPMYNAME=sapdev_DEV_03
argv[8] = -DSAPPROFILE=D:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS03_sapdev
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1629]
***LOG Q0K=> DpMsAttach, mscon ( sapdev.visu.com) [dpxxdisp.c 11753]
DpStartStopMsg: send start message (myname is >sapdev_DEV_03 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Fri Nov 27 02:32:01 2009
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 114
Release check o.K.
Fri Nov 27 02:32:05 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1468
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2927) [nixxi.cpp 4248]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=13356)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Fri Nov 27 02:32:40 2009
ERROR => W0 (pid 13364) died [dpxxdisp.c 14441]
ERROR => W1 (pid 13372) died [dpxxdisp.c 14441]
ERROR => W2 (pid 13380) died [dpxxdisp.c 14441]
ERROR => W3 (pid 13388) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W4 (pid 13396) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W5 (pid 13404) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W6 (pid 13412) died [dpxxdisp.c 14441]
ERROR => W7 (pid 13420) died [dpxxdisp.c 14441]
ERROR => W8 (pid 13428) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W9 (pid 13436) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W10 (pid 13444) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Nov 27 02:32:50 2009
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Thu Nov 26 21:02:50 2009
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 13364 Ended no 1 0 0
1 DIA 13372 Ended no 1 0 0
2 DIA 13380 Ended no 1 0 0
3 DIA 13388 Ended no 1 0 0
4 UPD 13396 Ended no 1 0 0
5 ENQ 13404 Ended no 1 0 0
6 BTC 13412 Ended no 1 0 0
7 BTC 13420 Ended no 1 0 0
8 BTC 13428 Ended no 1 0 0
9 SPO 13436 Ended no 1 0 0
10 UP2 13444 Ended no 1 0 0
Dispatcher Queue Statistics Thu Nov 26 21:02:50 2009
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
since last update total 8, udp 7 ( 87%), shm 1 ( 12%)
Dump of tm_adm structure: Thu Nov 26 21:02:50 2009
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Thu Nov 26 21:02:50 2009
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Nov 27 02:32:55 2009
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >sapdev_DEV_03 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (13340) (SOFT_KILL)
Stop icman
killing process (13348) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:13340 HANDLE:1564)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Nov 27 02:32:56 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:13340 HANDLE:1564)
wait for end of icman
[DpProcDied] Process lives (PID:13348 HANDLE:1568)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Nov 27 02:32:57 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:13348 HANDLE:1568)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Nov 27 02:32:58 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:13348 HANDLE:1568)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Nov 27 02:32:59 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:13348 HANDLE:1568)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Please help me to start my SAP MMC.
Thanks
Maybe you are looking for
-
Hi, Can anyone tell me the name of BAPI/RFC for creating travel request with input options for advance,request,cost distribution,etc. Thanks in Advance Shruti
-
I have 400 contacts in my nokia phone I want to transfer them to my blackberry.. I have tried to send using Bluetooth but it shows error message UNABLE TO CONNECT.. How can I do this
-
Not sure what I am doing wrong but when I back to the info panel to take CS5 back to 64-bit mode because some plug ins had been updated but the check box was no longer visible. So I am in 32 bit mode and do not know how to get out. Any ideas what I
-
Terminates all java virtual machine process
How I can terminate all java virtual machine process which is running on a computer thanks daniel
-
MS Office Spreadsheet 11.0 Form control
I up grade to Office 2010 from 2007 but unable to locate microsoft office spreadsheet control among those listed in toolbox. how do i get it to work because section of a userform, developed prior to the upgraded, is non-functional. Im okay with using