Could not assign an Event ID. GNNWGP() Result Code: -3

Hi,
Some one Know, why i have this message after an Hire (JOB_DATA_EMP) . I use HCM 9.1 and TOOLS 8.52
Regards

This is due to the GetNextNumberWithGapsCommit function which create a secundary connection to the database.
Enable Secondary database connection in the psappsrv.cfg file for all application server domain, by setting DBFlags=8 and bounce the appserver, this should solve your issue.
Edited by: Hakan Biroglu on Oct 17, 2012 1:24 PM

Similar Messages

Could not read administrative data for payroll result

Hi Experts,
I am trying to extract data from ECC6.0 for datasource 0HR_PP_REC_51 and getting error:
"Personnel No. 00100062 : Could not read administrative data for payroll result HR_BIW_PP"
Can any body tell me the relevant solution for that.
Thanks in advance!
Sapna

Hi Sapna,
Please can you tell me how to fix this error, I have the same problem now.
Thanks in advance.

Could not complete your request because the result would be too big - cs3

I exported 1.32 minute of quicktime movie file from FCP into photoshop CS3 about five weeks ago. Since then I've been diligently working on each individual frame. I've about 10 seconds left to the end of file. Unfortunately, I turned off my mac two nights ago and I can no longer open the file. The message says "could not complete your request because the result would be too big". The file size is 1.16 GB and saved as .psd. I'm working on Mac OS X 10.5.8. Any suggestion or solution would be appreciated.

Thanks c.pfaffenbichler! I did the command-alt-shift and I also increased the RAM in Performance-Preferences from 1963 (69%) to 1782 (90%). I got the same message. I've to admit that I'm not very technique about Photoshop. I'll have to search for the answers to your other questions. Such as the set up for the Scratch Discs, optimizing and System Maintenance? Your assistant would still be appreciated.
c.pfaffenbichler
1,137 posts since
Feb 20, 2009
1. Dec 22, 2009 12:20 AM in response to: vejoe
Re: could not complete your request because the result would be too big - cs3
How are You set for RAM and Scratch Discs?
Have You tried optimizing Your Performance-Preferences yet?
As with all unexplainable Photoshop-problems You might try trashing the prefs (after making sure all customized settings like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences You’ve changed) by pressing command-alt-shift on starting the program and/or starting as a new User.
Other than that System Maintenance (repairing permissions, purging PRAM, running cron-scripts, etc.) should not do any damage either.

I found i could not assign pts in this forum...

Hi,
I have some open questions as answered by experts, and i tried to assign pts but always got error message.
Does anyone else has same issue, and what should i do??
Thank you.

Hi,
For example for this thread, i am trying to choose radio button 'Solved the questions" to your answer with pt10.
But system give below error message:
" You are about to mark the message "Re: I found i could not assign pts in this forum..." by sap.sats as correct which means ...
An error has occured while assigning pts. Please refresh the thread view and try again.
I have tried to refresh many times, but still could not assign pts!!!
Does anyone else has the same issues??
Thanks.

SSIS BULK INSERT unsing UNC inside of ForEach Loop Container Failed could not be opened. Operating system error code 5(Access is denied.)

Hi,
I am trying to figure out how to fix my problem
Error: Could not be opened. Operating system error code 5(Access is denied.)
Process Description:
Target Database Server Reside on different Server in the Network
SSIS Package runs from a Remote Server
SSIS Package use a ForEachLoop Container to loop into a directory to do Bulk Insert
SSIS Package use variables to specified the share location of the files using UNC like this
\\server\files
Database Service accounts under the Database is runing it has full permission on the share drive were the files reside.
In the Execution Results tab shows the prepare SQL statement for the BULK insert and I can run the same exact the bulk insert in SSMS without errors, from the Database Server and from the server were SSIS package is executed.
I am on a dead end and I don’t want to re-write SSIS to use Data Flow Task because is not flexible to update when metadata of the table changed.
Below post it has almost the same situation:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/8de13e74-709a-43a5-8be2-034b764ca44f/problem-with-bulk-insert-task-in-foreach-loop?forum=sqlintegrationservices

Insteresting how I fixed the issue, Adding the Application Name into the SQL OLAP Connection String Fixed the issue. I am not sure why SQL Server wasn't able to open the file remotely without this.

Some data in ... could not be read or written. (Error code -36).

Hello.
I just got a Lacie 512mb disk, and thought it would be ideal for running my iTunes library off of. Got the disk, ran it through its paces, hooked it up to my Mac mini, and I can't seem to copy hardly any files over. Here's one error (but you can replace "iTunes Library" with any song and it's the same thing)...
'The Finder cannot complete the operation because some data in "iTunes Library" could not be read or written. (Error code -36).'
So, I think there's disk or file damage, etc. I boot off an external and run Disk Utility, DiskWarrior and TechToolPro against it - everything checks out fine.
But I can't copy files from the mini's internal to my external Repair Boot disk or the Lacie 512. Always that same -36.
So, at first I think it's the mini, then I think it's the Lacie, because it's new, so I reformat it: same issue. And that coupled with it won't copy to my Repair Boot, makes me think the mini again.
But, I've got a g1 iPod mini hooked up (formatted in hfsj+), and I can copy this file to the iPod mini, but no where else. I not sure what this makes me think.
And, I can duplicate the file on the Mac mini. In fact, if it's a song file that won't copy (none of them will), I can play it just fine.
Thanks.
Mac mini Mac OS X (10.4.3)

I experienced a problem in a familiar way.
After a recording session I tried to copy the complete folder with session and sound files to another disk (original and target disk both LaCie d2 250 FW800).
Somehow the proces stopped prompting an -36 error over some files.
When I look up these files in the Finder, it seems to have an iTunes audio-file icon instead of a ProTools audio-file icon (and so other standard app to open with). All the other files will copy fine. The files will play with quicktime in the preview window.
Any-one a solution?
Almost seems like some kind of copy protection, like implied earlier in this thread. I hope it's not. These are the originals...

Cannot move any files into trash to delete them. I get a Trash warning box saying "The Finder cannot complete the operation because some data in 'file name' could not be read or written.(Error code - 36)".Macbook has so much data it is almost not working

Cannot move any files into trash to delete them. I get a Trash warning box saying "The Finder cannot complete the operation because some data in 'file name' could not be read or written.(Error code - 36)".Macbook has so much data it is almost not working.
I have tried reseting to factory settings by removing battery and holding down the power switch for more than 5 sec but this does nothing.
Any ideas would be greatly appreciated as I think with so much unwanted data on the desktop and other places the whole os will crash very soon.
Thanks, Rick

The hard drive may be dying anyway, or the directory damaged because it is so full. You should never let the hard drive get over 85% full.
A -36 error is a read/write error.
All you did with the power is reset the SMC. Does nothing to reset everything to factory settings.
Do you have your original 10.4 installer discs for the MacBook?
Is your data backed up?

Finder can not complete the operasjonen because some information in «Firefox.app» could not be read or be written (malfunction code -36)

Upon downloading firefox 3.6.16 it suddenly stop loading and provides this explanation:
Finder can not complete the operasjonen because some information in «Firefox.app» could not be read or be written (malfunction code -36)
What do I have to to come around this ?
brgds
J.Bakke

Aint you quick to jump to conslusions? So becasue one thing isn't working of the hundreds of things I donwloaded doesnt work, my drivers are broken?
Ok then, let me download some other things to make sure
Minecraft: it worked ✓
Firefox: it worked✓
Synthesia: it worked✓
iExplorer: it worked✓
Pencil: it worked✓
Flash: it worked✓
Synfig was made in 2006, so it's not unlikely that it might not work for some people. By 'some people', I mean me. I was just asking if it was something on my side, but if that's all you got, I think it's highly unlikely that it's my fault. I don't even want it anymore, I got Flash Professional. I was just wondering. I could have sworn you used to write more detailed answers before jumping striaght to conclusions. 'Did this happen to you on anything else?' or maybe even 'Why don't you complain to them?' would have been fine.

Bulk Insert Task Cannot bulk load because the file could not be opened.operating system error error code 3(The system cannot find the path specified.)

Following error i am getting after i chnaged the Path in Config File from
\\vs01\d$\\Deployment\Files\temp.txt
to
C:\Deployment\Files\temp.txt
[Bulk Insert Task] Error: An error occurred with the following error message: "Cannot bulk load because the file "C:\Deployment\Files\temp.txt" could not be opened. Operating system error code 3(The system cannot find the path specified.).".

I think i know whats going on. The Bulk Insert task runs by executing sql command (bulk insert) internally from the target sql server to load the file. This means that the SQL Server Agent of the target sql server should have permissions on the file you trying to load. This also means that you need to use UNC path instead to specify the file path (if the target server in on different machine)
Also from BOL (see section Usage Considerations - last bullet point)
http://msdn.microsoft.com/en-us/library/ms141239.aspx
* Only members of the sysadmin fixed server role can run a package that contains a Bulk Insert task.
Make sure you take care of this as well.
HTH
~Mukti
Mukti

HT4623 I was updating my iPhone 4S when the internet got disconnected. By the time I get connected again it could not restore due to an unknown error code 1611, pls help

was updating my iPhone 4S when the internet got disconnected. By the time I get connected again it could not restore due to an unknown error code 1611, pls help

Try:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
Or it could be an Apple problem and you will have to wait.

When trying to sync new songs got message that they could not be synced because of "unknown error code (-50)" tried resetting ipod and rebooting computer

this is a second hand ipod nano . I think it is the 4th or 5th generation. It worked fine until I tried to sync two new songs and got the error code unknown error (-50) does anyone have any knowledge of this?

Have you looked here:
Sync Session Failed to Start iTouch iOS5: Apple Support Communities
iphone could not be synced sync session failed to start...: Apple Support Communities

I bought a new itouch 5, and when I plugged it in to get the updates it could not update and I got an error code

I bought a new itouch 5, and when I plugged it in to get the updates it could not update and I got an error code

And that error code is?

During iTunes restore: Could not connect to lockdown port. Error code 0xe8000065

I have been seeing the same error on multiple Windows 7 iTunes installations since the recent iOS 8.3 (and iTunes 12.1.2 update). During an attempt to restore a backup, the iPhone disconnected error appears in iTunes. Digging deeper into the logs, we see a USB connection error, and then a DLL loading error message (that may or may not be a red herring.)
Here is an anonymized log snippet:
[3248 @ Sun Apr 19 20:22:08 2015] [com.apple.console AppleMobileBackup.exe] WARNING: Restoring <udid snipped out> from <backup folder snipped out>
[3248 @ Sun Apr 19 20:22:38 2015] [(unknown facility) AppleMobileBackup.exe] AMDeviceConnect (thread 4140): Could not connect to lockdown port (62078) on device 1 - <udid snipped out>: 0xe8000065.
[3248 @ Sun Apr 19 20:22:38 2015] [(unknown facility) AppleMobileBackup.exe] _AMDNotifyHook (thread 4140): Could not load library SHLWAPI.dll from the AppleMobileDeviceSupport directory, C:\Program Files\Common Files\Apple\Apple Application Support\\SHLWAPI.dll.
[3248 @ Sun Apr 19 20:22:38 2015] [com.apple.console AppleMobileBackup.exe] ERROR: Error attaching to device
Here are things I've tried, as recommended by this support page iOS: Unknown error containing '0xE' when connecting to a Windows PC - Apple Support
restarting the computer
uninstalling iTunes from the computer, reinstalling, rebooting
reset settings on the target iPhone
swapping out for a different usb cable
swapping out for a different usb port on the computer
renaming the iPhone (as another thread from a few years ago suggests)
I'm very hesitant to try a factory restore via iTunes if the device is reporting USB connection severing, since we may end up with a bigger issue, like half-installed iOS
Has anyone seen this error lately as well? I'd love to find some more possible solutions to try.

Kelly Wilkerson wrote:
Could not load library SHLWAPI.dll from the AppleMobileDeviceSupport directory, C:\Program Files\Common Files\Apple\Apple Application Support\\SHLWAPI.dll.
I did also just notice the excess backslash in this path. I'll do some experimenting to see if that makes any difference referencing a file in Windows 7 (OSX is usually very forgiving of that in my experience, so it could be nothing.)

Dynamic Action, validation check, on an Item, could not use Change event

I am learning how to use Dynamic Actions in a 3.2.x app that was upgraded to 4.0.x. I wanted to share what I learned adding client side validation with these actions. Perhaps an Apex guru could suggest an easier method to use this feature.
I have an existing function where a user selects multiple rows in a report page, and then assigns a single status and enters justification text for the selected rows in another page, then saves changes (via submit).
One item, justification, is required. I replaced my JavaScript validation of an empty value, e.g., P10_JUSTIFICATION.value, with a dynamic action. The Change event was a candidate for this item, with the "is not null" Condition. However, it is possible to initiate this screen to review the status, overlook the justification text and immediately select a button to save changes. No Change event has fired. The Before Page Submit event was applicable here. This Event selection in the wizard does not provide the Item for definition and then the Condition wasn't the right context though available for selection. I selected JavaScript expression for the Condition, actually entered my original JS test expression, and created one True Action. The True action displays an Alert to tell the user that required text is missing.
Test of this DA was not completely successful. The alert appeared but the page went on to submit anyway. I found I had to add another True Action, Cancel Event, to stop the submit. The DA was then successful.
The Apex site examples, [http://st-curriculum.oracle.com/obe/db/apex/r40/apexdynactions/apexdynactions_ll.htm] , do a great job showing use of Change and Set Value events for Items but a user may not always navigate through items. These features were promoted for developers with no to little knowledge of JavaScript to use Apex for application development. This DA required using/understanding JS anyways.
My next step is to implement actions on a tabular form that that has required values. It is disconcerting that I have read in the forum that the column value references such as f0x and its row number are required to get it all working (as a DOM or JQuery selector). I have already found that tabular form columns can be re-ordered from v3.2.1 to 4.0.x. I was hoping I could declare dynamic actions or simpler Javascript methods that would not rely on f0x array references.
Thanks,
Kelly

It is disconcerting that I have read in the forum that the column value references such as f0x and its row number are required to get it all working (as a DOM or JQuery selector).Not necessarily. One possibility is to use descendent jQuery selectors to attach the dynamic action event handler by column heading:
td[headers="HIREDATE"] input

Could not assign Correlation in Integration Process

Hi,
in an Integration Process I have defined a Correlation and a Send Step.
In the Send Step I see question marks for the fields use correlations and activate correlations.
If I want to assign my correlation to this fields I can see it in the drop down menu, but if I click on it nothing happens.
Somebody know how to handle this?
Regards
Patrick

It worked now...
Strange it seems that it worked after i choosed first the empty field in the drop down menu.

Could not assign an Event ID. GNNWGP() Result Code: -3

Similar Messages

Maybe you are looking for