Could not assign Correlation in Integration Process

Hi,
in an Integration Process I have defined a Correlation and a Send Step.
In the Send Step I see question marks for the fields use correlations and activate correlations.
If I want to assign my correlation to this fields I can see it in the drop down menu, but if I click on it nothing happens.
Somebody know how to handle this?
Regards
Patrick

It worked now...
Strange it seems that it worked after i choosed first the empty field in the drop down menu.

Similar Messages

The request could not be submitted for background processing.

Post Author: Chriss
CA Forum: Administration
It's an BOE XI SR2, on Win2k3 server, with a print cluster with two print spools, handling 3000+ printers. I discovered this error to be intermittent and only on one of the spools. It turned out that the only common factor was an HP4250 print driver. I backed all the 4250s down to 4200 drivers and the intermitent error ("Error in File. The request could not be submitted for background processing.") went from about 100 a day to zero. The other spool had a different version of the HP4250 driver and would on rare occassion cause this error, "Error in File ... Page header or footer longer than a page." but never the background processing error.
For reference, when I got this error in XI R1, this was the solution for 'the error with one name and many causes':The error "The request could not be submitted for background processing" can be related to a corrupt or wrong versioned crpe32.dll in the Crystal bin folder. Renaming to crpe32.dll_bak and using the repair command in the the "Add/Remove Programs" tool in the "Control Panel" will reinstall the correct dll. Then restart the Crystal services.

Post Author: krishna.moorthi
CA Forum: Administration
For Crystal reports :
Error : "The request could not be submitted for background processing"
I think,this was not related to a corrupt or wrong versioned crpe32.dll.
but the below mentioned is one of the reason for getting this error.
I got the error when the main report(crystalreports10) having more than 2 subreports not assigned proper tables for the subreports.
Example: (this code raise the abone mentioned error.)
rpt.SetDataSource(Exdataset);
rpt.Subreports["subreportname1"].SetDataSource(Exdataset); // Exdatatset.Tables[1]
rpt.Subreports["subreportname2"].SetDataSource(Exdataset);// Exdatatset.Tables[2]

Crystal Reports VS 2008 "The request could not be submitted for background processing"

Hi,
I am going to try to explain this issue the best I can. Please let me know if you need any other information or have any ideas as I have exhausted my resources. We have an ASP.NET application that has highly formatted crystal reports in them that the users can export as PDFs. All reports export without a problem when the application is run off of our desktops. The reports use a sql server authenticated user, executing stored procedures, and each subreport is linked by the main parameter. We are using Visual Studio 2008 version 3.5 SP1 with Crystal Reports Basic for Visual Studio 2008 on Windows 7 Enterprise SP1. We have designed the reports in Crystal Reports XI Release 2 (11.5.12.1838) and imported them into the ASP.NET application. When trying to export the reports as PDFs from the development or production servers, we get the error message below for some, not all, reports:
System.Runtime.InteropServices.COMException (0x800002AD): Error in File C:\Windows\TEMP\KeyAccountProfile {9FA5C095-77A2-425D-AC6B-8BB66B435336}.rpt: The request could not be submitted for background processing. at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext) at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
We have cleared the temp directory on the servers before exporting and are still receiving the error. We have installed Crystal Reports Basic Runtime for Visual Studio (10.5.2.0) on both servers. I have identified the underlying issue to one stored procedure/subreport that is causing the report to fail. The weird thing is, when we change the connection to point to development, the stored procedure/subreport runs fine for the report that generates an error when run from production, and the data is the exact same. I have tried rebuilding the subreport but the error still appears even though it runs fine for other reports.
I have been through the document below, and othe similar issues in the forums, but still have not found a resolution. I was trying to use the "modules" application put since this is an ASP.NET application I am unsure of which executable I should be looking at.
http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/50a6f5e8-8164-2b10-7ca4-b5089df76b33?QuickLink=index&overridelayout=true&36837934524320
Thanks in advance for your assistance,
Brad Hood
06-26-14
OK.. I did some more investigating on this today. I have found out when I move the sub report that generates the error under another sub report, the sub report in question runs without issue. But when I try and move the sub report that produces the error above any other sub report, the error still generates. Can this get any weirder.... FYI.. there is a total of ten sub reports on this report.

Hi Brad
I'm not sure that Modules would show us anything in this case, so let's try a few other things:
1) Make sure you are using SP 1 for Crystal Reports Basic Runtime for Visual Studio:
Crystal Reports for VS 2005 and VS 2008 Updates & Runtime Downloads
2) Seeing as this works on dev, this may be some db inconsistency so enabling the report option "Verify on 1st Print" will be a good idea.
3) Double check the database client and make sure the same client is used on dev and deployed systems. Actually I take back my Modules negative as this is where it may prove useful. Once you have the Modules logs, look at who is loading the crpe32.dll, then look at that process and see the client dlls.
4) Check the printer driver; see if there are any updates. Try a different printer driver.
Ten subreports is not too bad, though not that good either as you are loading the report engine with at minimum 11 simultaneous reports (each subreport is considered to be a report). If a subreport is in a details section and the details section returns a 100 records, you are running 100 + 1 reports. This may lead to memory issues, which may lead to the error.
If I was a betting man, I'd put most of my money on the printer driver (based on your last addition to your post). What ever money I had left would go to some database issue (be it actual data or client related).
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Error: The request could not be submitted for background processing

I'm getting an intermittent error in our custom reporting application using Crystal Reports Server XI R2 w/ SP1:
Error in File C:\WINDOWS\TEMP\{F6D30537-956A-458C-96D0-84ECB520D688}.rpt: The request could not be submitted for background processing.
I'm using the Report Application Server XI Release 2 .NET SDK. This is the code that produces the exception (The export type is pdf):
ByteArray ba = this.reportClientDocument.PrintOutputController.Export(ConvertExportReportTypeToCrystalReportExportType(),0);
The error is also logged by Business Objects in the crystalras log file:
ErrorLog 2007 12 3 12:24:56.531 6624 4872 (\servers\ras\dtsagent\reporthandler.cpp:11592): CReportHandler::buildReportViewerError: CSResultException thrown. ErrorSrc:"CRPE" FileName:"\servers\ras\dtsagent\reporthandler.cpp" LineNum:11588 ErrorCode:685 ErrorMsg:" Error in File C:\WINDOWS\TEMP\{F6D30537-956A-458C-96D0-84ECB520D688}.rpt:
The request could not be submitted for background processing." DetailedErrorMsg:""
This has been happening regularly about once a week, at which point the RAS fails and no more reports can be run until the CMS and RAS servers have been restarted.
Has anyone else had this problem, or have any ideas?
Thanks

It was not a bug (not in all cases anyhow), but it is one of those error message that might as well say; something went wrong. I wrote an article on the most likely cases for the error and the article can be downloaded from here;
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50a6f5e8-8164-2b10-7ca4-b5089df76b33
See if the above article will help you out. Please note that having the latest SP / FP is step one. The downloads page is here;
http://service.sap.com/sap/bc/bsp/spn/bobj_download/main.htm
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

Request could not be submitted for background processing

Using Crystal Reports XI R2
 Using Visual Studio .NET 2005
 
 Here's the scenario. The client goes to run a report and specifies the filters they want for the report. We load a pre-built rpt with no saved data and pass the filters in to the report via the parameters. We then generate and export the report to another rpt file with saved data using the PULL method from the report itself. When the viewer wants to view the report the file (with saved data) is copied locally to the web server and the CrystalReportViewer control is pointed at the rpt with the saved data in it. In almost every case the reports come up fine and display in the viewer no problem. The error above (Request could not be submitted for background processing) tends to show itself in the CrystalReportViewer control whenever the report has large amounts of data (like 8 megs worth). I've tried everything I can find on this issue including the steps listed in the white paper for this issue.
 
 So just to be clear on the steps taken:
 1)If I take the saved rpt and open it in Crystal Reports itself then it works fine.
 2)If I point to the rpt with the CrystalReportViewer control in my development environment it works fine.
 3)I've run Process Monitor and there were a couple of access denied messages to one of the HKLM registry keys but I modified the permissions so those went away but the problem still remained
 4)As far as I can tell the report has no design issues. Nothing runs over any edges, no overlapping of any kind, the Font itself exists on the machine in question.
 5)Its not a dataset problem since the report is using the PULL method to generate itself plus the rpt with saved data is correctly generated its just showing the above error when trying to view it in the control.
 6)The client is using a WIndows 2003 server, with 4 Quad Core processors and 8 gigs of RAM and 100 gigs of hard drive space remaining (so hardware is not an issue)
 7)In code the ReportDocument object is inside a using statement (C# .NET) and only exist for the brief period needed to create the rpt with saved data. So they are getting closed and disposed of correctly. Also as pointed out above the rpt with saved data is already being generated correctly its just not displaying in the control.
 
 So to recap on a web server used by multiple people whenever a user tries to view a saved rpt file that has a large amount of data using the CrystalReportViewer control the error above tends to get generated even though the vast majority of the reports do display. I'm at a loss for what else to try to make the report display correctly in the control. Any thoughts would be helpful.

Make sure you are using SP6:
https://smpdl.sap-ag.de/~sapidp/012002523100015859952009E/crxir2win_sp6.exe
Runtime
msm:
https://smpdl.sap-ag.de/~sapidp/012002523100000634042010E/crxir2sp6_net_mm.zip
msi:
https://smpdl.sap-ag.de/~sapidp/012002523100000633302010E/crxir2sp6_net_si.zip
Other than that, I'd consider installing the CR designer - as a test, on the user machine and see if the designer can open the report.
Ludek

Could not support request for background processing

Hello,
We have a .NET 1.x application with CrystalReportViewer control.
The application is running on a windows terminal server with approximatively 5 users using the applications and 10-20 logged on doing other stuff.
When the user tries to preview the report using the CrystalReportViewer object , the following exception is "sometimes" thrown
[translated from dutch]
CrystalDecisions.CrystalReports.Engine.InternalException:
error in file C:\Users\*username*\AppData\Local\Temp\35\{B8D10435-A104-4422-A220-6DB483DFC285}.rpt:
The request could not be submitted for background processing. ---> System.Runtime.InteropServices.COMException (0x800002AD)
The application then terminates and if the user restarts the application attempts to reload the report, it usually loads with no problem .
It can not be intentionality reproduced but it does happen frequently.
I have been Googling for this problem , but havn't found any solution.
On this website however a link is provided to a BO KB article with a possible solution:
http://aspadvice.com/blogs/rjdudley/archive/2005/10/26/13443.aspx
However, the article appears to require a login, my SAP CR account i used to register on these forums does not to work.
What can we do to determine the exact cause of this problem, or are there any known solution for this problem ??
If you need any more information please do ask.
also,
We have a licence for CR 11 and so does our client, what steps would we need to undertake to get professional /payed support from SAP crystal reports for techinal issues like this, is there a way to open a support ticket ?
Thank you very much for your time, any help is appreciated !
Willem

Hello:
First I have to apologize for the troubles with CR 11.5 - not sure why that would be, but your frustration is understood. Perhaps sometime in the future we can look at this in another thread (e.g.; it should just work...).
Anyhow, there is really no compeling reason for you to go to CR 11.5 (there are reasons (see below), but 11.0 is fine with framework 1.1).
So to start off. Version 11.0.0.895 will need to be updated to SP4. See this|http://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReports2008%28and9.1%2CXIR1%2CXIR2%29-VersionandDownloadinformationforServicePacks] wiki. As you can see in the wiki, the latest version of CR 11.0 is updated to SP 4 with a version of 11.0.9500.x. Before we even start to look at this, you will have to get to SP4.
Re. preference for CR 11.5. If the issue is not resolved with CR 11 Service Packed to SP 4, all we have left is; going to CR 11.5 - with the latest SP (SP6) as that is the version I would be testing with. Note that CR 11 is completely out of support now, CR 11.5 is out of patch support (e.g.; no fixes) and any support terminates in June of this year.
And we have not even started to work the issue. Re-reading your initial post, I am starting to suspect that loading may be the root of the issue here. I'd recommend having a peek at the following:
http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/d08468e2-a81d-2b10-faa9-9837f58ee1c2
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/7025839b-00d4-2b10-33b4-cf0aa9e08412
The following article specifies CR 2008, but most if not all the points will apply to CR 11.0 also:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/7025839b-00d4-2b10-33b4-cf0aa9e08412
The below will also be good to be aware of:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40bccdfd-88a6-2b10-1da1-c47a54b625a7
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0070692-01a8-2a10-4797-ff0f5f73e1e1
The following articles were written by me and may also apply:
[Crystal Reports Maximum Report Processing Jobs Limit|http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/f053713e-3e3d-2c10-2a81-f79259e54023]
[Improving Crystal Reports Performance in Visual Studio .NET Applications|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/8029cc96-6ff3-2b10-47a2-b30ea790ea5b].
I realize I've thrown a lot of info in here, but all of it may apply. In a way I feel like we've ended up across the river without crossing the bridge first, but let's see what comes out of all of this (teleporting worked for Captain Kirk ).
- Ludek
Edited by: Ludek Uher on Mar 10, 2011 7:25 AM

Error in File....request could not be submitted for background processing

Hi
We get this error when generating a pdf using crystal reports in .NET. This error doesnot occur when we run the report individually. It occurs when we have multiple users accessing the report simultaneously...
e.g of the error that gets logged...
Error in File C:\WINNT\TEMP\TransactionPDF_rpt {6F6E2A6B-9498-470D-BA4A-8F16E333C232}.rpt:
The request could not be submitted for background processing. at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
We have checked the report formats, access to folders, etc. looks fine...
Any help appreciated.

See if [this|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50a6f5e8-8164-2b10-7ca4-b5089df76b33] article will help:
Ludek

The requtest could not be submitted for backgroung processing.

Our Web applciation is using ASP.Net Framework 2.0 and Crysal Report Assembly version is 10.2.3600.0
After fetching one particular report we are getting below error
"Error in file c:\windows\temp\FileName{1B044BEA-1C14-44DF-92DC-107455F949FD}.RPT
The requtest could not be submitted for backgroung processing."
There is no problem while fetching data from backend procedure. It runs without error.
Is there any hot fix for the same?

We too are facing same challange with CrystalReports Version=10.2.3600.0
Can some body post resolution.
Thanks in advance.
-Murali

Could not perform some final integrity tests

I'm trying to download and install a trial version of Photoshop Elements. Each time the download completes I receive this message, "the download is done but the download manager could not perform some final integrity tests. check the file and download again if necessary"
Can anyone help me overcome this?

Try downloading using a different web browser to download.
See this:
http://kb2.adobe.com/cps/152/tn_15296.html
The intergrity error next to last error message in the table points to a download issue. Not exactly the same error but similar...
http://kb2.adobe.com/cps/400/kb400531.html
The above document also states:
Cut/Paste:
Errors not listed in this document
Other error messages may appear when you download files from the Adobe website. These error messages will most likely be generated by your web browser or by your Adobe product installer.

I found i could not assign pts in this forum...

Hi,
I have some open questions as answered by experts, and i tried to assign pts but always got error message.
Does anyone else has same issue, and what should i do??
Thank you.

Hi,
For example for this thread, i am trying to choose radio button 'Solved the questions" to your answer with pt10.
But system give below error message:
" You are about to mark the message "Re: I found i could not assign pts in this forum..." by sap.sats as correct which means ...
An error has occured while assigning pts. Please refresh the thread view and try again.
I have tried to refresh many times, but still could not assign pts!!!
Does anyone else has the same issues??
Thanks.

ERROR:Could not read archive file - during Processing Base System Part 2

Hi there,
What I have:
* I have problem with installation of the Mac OS X Panther v10.3 on iMac.
* I have 3 original CDs (black with silver X).
What I did:
* I made new 1 partition and formated disk as Mac OS Extended (Journaled) over the Disk Utility in the first CD as normal without additional options (if I tried to format disk with zero all data and 8 way random write format after 3 days computer freeze)
* I verified disk over this utility - that was ok - HFS volume verifed.
* Then I restarted the computer and ran installation from this first CD
What happened:
* installation did not finish, because there were some problems during installation process.
* i tried to customize installation just for essential work (without other languages support, printers etc), but it was still the same problem
Installation log:
After I choosed installation type, there was first error, but it did not look like important.. - root: bootstraplookup(): unknown error code
Checking your installation disk - OK
Preparing disk - OK
Preparing base 1 and 2 - OK
Other preparing.. - OK
Processing Base System Part 1 - OK
Processing Base System Part 2
==
ERROR:Could not read archive file. - pax: Invalid header, starting valid header search.
ERROR:Could not read archive file. - pax: Invalid header, starting valid header search.
last message repeated 2 times
ERROR:Could not write file. - pax: WARNING! These patterns were not matched:
Some files for Essentials may not have been writen correctly.
root: Installer[108] Exception raised during posting of notification. Ignored. exception: Some files for Essentials may not have been written correctly. (code 1)
Install Failed
Error detected
Name: NSGenericException
Reason: Some files for Essentials may not nave been written correctly. (code 1)
==
It seems like a problem with reading some data from the CD, but during the installation checking of disk was ok.. maybe it can be problem with the cd-rom..? Or problem with data on cd-rom - I mean bad archive file..? But it is original CD.. What do you think??
Thank you!

Tomas,
On THIS Page, locate your iMac model.
From the Documents column, click on the appropriate number link.
Using the info in the document that opens, locate the serial number of your iMac.
On THIS Page, in the text field for Search Tech Specs, enter that serial number.
Click on the model of iMac that appears.
Post a link to the page that opens, or post the info requested below.
Exactly which model iMac is it?
What is the Processor speed?
What size is the Hard Drive?
How much Memory is installed?
What type of internal Optical Drive does it have?
Which version of OS, was the original Installed Software?
ali b

Not able to transfer Integration Process in ID. Also not seen in SXI_Cache

Hi Experts,
I am trying a BPM scenario. I have created all design objects along with Integration Process in IR and saved and activated the same. Issue is : I am not able to transfer the Integration Scenario from IR in ID. I am also not able to see the created integration process in SXI_Cache under Integration Processes node. Can you please suggest some thing related to this issue. Thank you.

hi,
>>>I have created all design objects along with Integration Process in IR and saved and activated the same. Issue is : I am not able to transfer the Integration Scenario from IR in ID.
but in order to use Integration Scenario in ID you need
to create it in IR first and Integration Process is not the same as
integration scenario
you can only transfer Integration Process to ID as an Integration Process
(under services without party node)
Regards,
Michal Krawczyk
http://www.mypigenie.com - XI/PI FAQ

Starting yesterday, Firefox would not anchor to a single window on my MacBook Pro running Lion. Every time I change to a new window, Firefox appeared with a flash. Could not assign it a window using Mission Control. Any ideas?

If I open Firefox and attempt to scroll to an open window on my macbook, the screen flashes and Firefox appears in the new window. Firefox screen flashes after scrolling to it even if already resident on that window.

If I open Firefox and attempt to scroll to an open window on my macbook, the screen flashes and Firefox appears in the new window. Firefox screen flashes after scrolling to it even if already resident on that window.

Could not assign an Event ID. GNNWGP() Result Code: -3

Hi,
Some one Know, why i have this message after an Hire (JOB_DATA_EMP) . I use HCM 9.1 and TOOLS 8.52
Regards

This is due to the GetNextNumberWithGapsCommit function which create a secundary connection to the database.
Enable Secondary database connection in the psappsrv.cfg file for all application server domain, by setting DBFlags=8 and bounce the appserver, this should solve your issue.
Edited by: Hakan Biroglu on Oct 17, 2012 1:24 PM

Integration Process is not displaying in SXI_CACHE

Hi all,
My Integration Process is not getting displayed in SXI_CACHE.
After configuration when I executed the scenario ..it went in to error "NO RECEIVER FOUND"
when i checked in SXI_CAHE the cache contents are not updated.
My Integration Process is not displaying in SXI_CACHE .....in not there in the list,this is the frist BPM in this machine.
Inside IR the Integration Process is activated with no error.(F7).
What is wrong with my configuration, have any one faced the same issue?
Thanks for your time and reply.
Regards
Sunil

Hi Sunil,
Go to SXI_CACHE , then from Menu XI Runtime Cache choose Start Delta Cache RefreshF6. Try this, , After clicking wait for sometime to refresh.
Path Prefix set to /dir/CacheRefresh.
https://websmp204.sap-ag.de/~sapdownload/011000358700003163902004E/HowTo_handle_XI_30_Caches.pdf
Also check out the role of the user using SU01. are you using PIISUSER?
Also refer:
How to handle cache in PI - https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0332b2a-eb97-2910-b6ba-dbe52a01be34
Also check
Does PIISUSER have the role SAP_XI_IS_SERV_USER_MAIN. Is profile generated for the role?
See SAP Note 1030255.
Some more advices:
1.Go to Environment -
> Click on Clear SLD data cache.
2.Tools -> Cache Notification
You will find at that there will be some red dots if u refresh
Please click on then and refresh once again
Regards,
Vinod.

Could not assign Correlation in Integration Process

Similar Messages

Maybe you are looking for