Could not complete the last command : problem with toast 10

Hi, I am trying to burn blu ray content with Toast 10 Pro (blu-ray content burned to DVD). I have created the content (Quick Time movie) with FCP 7 (into an MOV file). And then added it to Toast 10. Then I tried to create disk image. It gave me this error:
could not complete the last command because there is a problem with the source material: Error code - 18771.
I tried to directly burn DVD also, and also not successful. Anybody has the same error and how to solve it?
Thanks a lot, and happy new year.

I posted some more experiences with using TOAST on Roxio forum. I thought I'd share them here.
1. 98 video clip limit. I have been helping my parents and some friends to produce un-edited videos after their vacations, etc. And I quickly ran into this 98 video clip limit, to the point I had to produce multiple DVDs for them.
2. Error 18771 issue. This happens if the individual video clips are too long. If I edit the video using FCP or FCE, and produce, say, half an hour of video, put it into a MOV file. Then add it into Toast. It will encounter this issue. So, the way I dealt with it, was to produce shorter video clips. So far it has been working out for me.
3. Between video clips, I am not sure how to do transition. So far, between clips, there is this annoying pause. I would rather, either it just immediately jump to the next clip. Or, out of my own choice, insert some kind of transition. Not sure how to do that. If fellow toast users can point me in the right direction, that will be certainly appreciate it.
4. I have not been able to get the Chapter Markers from FCP to effectively show up and be reflected in Toast as it defines the menus and chapters. Again, this may be because of my own lack of knowledge. If somebody can give me the pointer to do it, again, very much obliged.
Message was edited by: seantshen

Similar Messages

How do I resolve: "Could not complete the Crop command because the file is not compatible with this version of Photoshop" error message?

Photoshop document created in current version of PSCC2014, now will not crop, resize, etc without throwing compatibility error.
"Could not complete the Crop command because the file is not compatible with this version of Photoshop."
How do I resolve without recreating the file?

Ooops. Hit save reply prematurely.
You may be able to open the flattened composite or the embedded JPEG preview of your file in Adobe Illustrator, GraphicConverter (Mac only) or some such application, but your layers will be gone.
The problem of working across a network is that it's not supported by Adobe:
This is the boilerplate text often used in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
If you are opening files over a network or saving them to a network server, please cease and desist immediately in the event you are currently experiencing problems with one or more files. Working across a network is not supported.
See:
http://kb2.adobe.com/cps/406/kb406793.html
Copy the CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work. It should.
Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
When problems arise, a lot of valuable work can be lost.

Could not complete the export command because of an application error

Every once in awhile I get the error, "Could not complete the export command because of an application error" when using the Save for Web option. It's really confusing because the error is not consistent. I don't get it all the time. In fact, 99% of the time I can save with no problems. When I quit Photoshop and reopen my files they seem to save just fine. Does anyone know why this happens, and how to prevent it from happening in the future?
Here are my specs:
Macintosh: iMac
OS: 10.6.8
Photoshop: CS3 (v10.0.1)
Any help is greatly appreciated!

No idea about the specific issue, but I like to pass on some general advice I have received myself here over time:
Boilerplate-text:
Are Photoshop and OS fully updated?
As with all unexplainable Photoshop-problems you might try trashing the prefs (after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed) by pressing command-alt-shift on starting the program or starting from a new user-account.
System Maintenance (repairing permissions, purging PRAM, running cron-scripts, cleaning caches, etc.) might also be beneficial, Onyx has been recommended for such tasks.
http://www.apple.com/downloads/macosx/system_disk_utilities/onyx.html
Weeding out bad fonts never seems to be a bad idea, either. (Validate your fonts in Font Book and remove the bad ones.)
If 3rd party plug-ins are installed try disabling them to verify if one of those may be responsible for the problem.

Could not complete the Crop command because of a program error - Win 7

So I use PS CC everyday for cropping out images from design mockups for websites.
Yesterday (1 April 2014) I got a new comp from the designer with some updated images. So I opend the comp, and began to setup the cropped area with my guides. I then grabbed the marquee tool and made my selection, clicked Image->Crop, and then I get an error message.
"Could not complete the Crop command because of a program error."
Well that is helpful.
So now its "Help me Google, you're my only hope.", after about an hour or so of searching this error I find that it mostly happens to Mac users. I am using Windows 7. I also find that people are trying to get information form a PSErrorLog.txt file that is suppsoed to be located in the "Preferences Folder"... again I am on Windows 7.
So more searching to find the Windows eqivelant of this file's location: C:\Users\{USERNAME}\AppData\Roaming\Adobe\Adobe Photoshop CC\Adobe Photoshop CC Settings
Only to find there is no PSErrorLog.txt file. I do have a sniffer-out.txt file and a bunch of .psp files, a SynchFiles folder and 2 Workspaces folders (one Modified).
So I say to myself, "Well, I have cloud and a fast connection, won't take long to reinstall." So I delete PS ( I am also runnig DW, FL, Br, and AI ), and PS only. I do not run the cleaner tool as it only wants to delete a PS driver, or EVERYTHING!, which I do not want to do, I just want to delete PS. So I delete PS and check for anything left behind (why is there always stuff left behind? Apparently DELETE really means "Only delete some parts of the app that are required to make it work, and leave the rest behind.", or something.). Anyway, I then reinstall, go to crop again, and get the same error.
So here I am, "Help me Adobe Forums, you're my only hope."

Mylenium,
You are correct. But none of that information, or those parameters, have ever had any effect on cropping anything in PS before. I crop vector smart objects brought in from AI all the time. In this case, yes the layers I am trying to crop are vector smart objects, which I rasterized and merged, then resaved the document and still get the same issue.
But, going off of your suggestion, I did flatten the image completely and I am now able to crop it without error. I suspect that there is something else in the layers that maybe causing this issue, as you have mentioned.
Thank you for your input, while you may not have known it, you gave me at least somewhere to start to try and figure out what is happening.

Could not complete the paste command because the icc profile is invalid

Hi. In PS CS4 & AI CS4.
I get the following error when I try to copy & paste a logo from Illustrator into Photoshop:
could not complete the paste command because the icc profile is invalid
I don't understand because the color settings are sychronized. I do this all the time. I have not received this error before.
Thanks.

I received the file from my client. However, last week I had no trouble pasting the same file into a PSD file, as a smart object.
The color file is a label mechanical, which I place into a PSD file of the product. These are used for print ads and web graphics. The color is very critical and has worked really well for the last 4 years.
I have used the default color settings in Creative Suite and its been working fine. They are in synch and, I have no idea how to re-assign the color profile. I’m a graphic Designer, color correction is not something I would do normally.
Ron

"Could not complete the save command because of program error."

Dear all,
I am having problems saving jpegs on Photoshop CS3. I use windows XP professional. I am saving using the save menu (not save as). I am using a saving archive, where folders are within folders. I am trying to save images which have been copy and pasted from the web.
The message I get is:
“Could not complete the save command because of program error.”
Has anyone got this message, and know how to solve it?
Helen

I think My Documents is a local folder.
I would avoid saving to deeply buried folders because the path will be too long.
If the problem still persists, try resetting your preferences as described in the FAQ.
http://forums.adobe.com/thread/375776?tstart=0
You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
This resets all settings in Photoshop to factory defaults.
A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.

Could not complete the save command because there is not enough memory (RAM)

Hi There,
As per subject line we are using Photoshop CC on 3 different computers, got one error frequently on all systems "could not complete the save command because there is not enough memory (RAM)".
System Configuration:
2 Systems have Dual Core processor with 4 GB RAM
& 1 System have Core i3 processor with 8 GB RAM
We tried to solve our end but still not resolve.
Regards,
Pankaj A. Pagare
Cont. No. 9922507601

http://forums.adobe.com/community/photoshop
This forum is actually about the Cloud as delivery, not about using individual programs
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll

When I try to paste an CCI file into a PSD, I get this message- Could not complete the Paste command because the ICC profile is invalid. I need the layer to be an editable smart object! What's the solution? Ron

When I try to paste an CCI file into a PSD, I get this message… Could not complete the Paste command because the ICC profile is invalid.
I need the layer to be an editable smart object! What's the solution?
Ron

I received the file from my client. However, last week I had no trouble pasting the same file into a PSD file, as a smart object.
The color file is a label mechanical, which I place into a PSD file of the product. These are used for print ads and web graphics. The color is very critical and has worked really well for the last 4 years.
I have used the default color settings in Creative Suite and its been working fine. They are in synch and, I have no idea how to re-assign the color profile. I’m a graphic Designer, color correction is not something I would do normally.
Ron

Error message"Could not complete the Save command......

Sometimes when I open Photoshop CS6 (cloud version) and I try to save my work I wil get an error message: "Could not complete the save command because the document is currently being saved in the background. Please try the operation again after the Save Command has finished" Well the background save never finishes and I end up having to restart Photoshop and lose all my work. Any ideas. I am running Windows 7, core i& quad procewssor and 12 gigs of ram.
Thx

Hi Chris!
Yes. I did that after the first time it happened and then it happened again. Here is my system info:
Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 3073 MHz
Built-in memory: 12279 MB
Free memory: 6264 MB
Memory available to Photoshop: 10996 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: ATI Technologies Inc.
Video Card Renderer: AMD Radeon HD 6800 Series
Display: 1

Could not complete the Move command because the result would be too big

trying to move a picture and I get "could not complete the Move command because the result would be too big". It is the only layer.

This is for version 13.1
I am getting this error as well. I am trying to combine an ~19,000x3600pixel photo with an ~10,000x3600 pixel photo. I created a blank file 30,000x4000pixel to put the 2 photos together. I paste the larger photo into the blank file and position it to the vert center and horiz left of the blank file. I then paste the smaller picture into the new file. It goes in at the center in its own layer as expected. As soon as I try to move it left or right I get the above error message. I can move it ALL the way left and it will stay.
Also if I just create the blank file and paste the larger file in it and move to the right or left by just a little (say with the cursor controls or mouse but move slightly) I get the error. If I move all the way left it stays. If I move all the way right it gives an error BUT if I select undo move and redo move it goes to the right and stays. I tried that with the small file but could not get it to stay right.
all 3 are 72px/in

"Could not complete the Paste command because the required resorurses were not found".

I am currently trying to paste between two programs from Illustrator CS5 to Photoshop CS5, I do this often, however today its decided to sulk. Can anyone help me rectify this problem please.
Error:
"Could not complete the Paste command because the required resorurses were not found".

I see occasional posts that PS has clipboard problems. You may have to reboot.

Could not complete the Liquify command because of a disk error. any ideas?

Could not complete the Liquify command because of a disk error. any ideas?

When you choose liquify command it says "Could not complete the Liquify command because of a disk error." so nothing at all happens other than the error message
There is plenty of room on my scratch disks --lots of it
Tried using a smaller selection using Marquee Tool to outline a smaller area near where I want to Liquify. makes no difference. tried a small file as well. no ability to use liquify.
This is really weird.
keep probing the depths of your mac ideas, as I am going a bit nuts with this, friends

PSE 5 Error "could not complete the open command because of a program error"

I have been using PSE 5 for years but all of a sudden when I try to open multiple files "could not complete the open command because of a program error" appears. I have reformatted my computer and reinstalled all programs & updates but still get the error. I am trying to access photo files in a specific, user created, directory on my computer; the funny thing is that if I access files in the My Documents\My pictures\ Sample pictures folder I am able to open all the files. Any and all help or suggestions are welcome. Thanks

When you choose liquify command it says "Could not complete the Liquify command because of a disk error." so nothing at all happens other than the error message
There is plenty of room on my scratch disks --lots of it
Tried using a smaller selection using Marquee Tool to outline a smaller area near where I want to Liquify. makes no difference. tried a small file as well. no ability to use liquify.
This is really weird.
keep probing the depths of your mac ideas, as I am going a bit nuts with this, friends

"Could not complete the custom command because the ICC profile is invalid"

I got the above message when I attempted to soft-proof an image in Photoshop CC on Windows 7 64-bit.
I had downloaded the ICC profile from drycreekphoto.com, specifically:
http://www.drycreekphoto.com/icc/Profiles/IccFiles/Arizona/Costco-AZ-Tucson-NW-Lus.icc
and installed it by right-clicking on the downloaded file and selecting "Install profile"
Windows installed the profile in the following directory:
C:\Windows\System32\spool\drivers\color
Then in Photoshop CC, I did
View -> Proof setup -> Custom
But when I selected the above profile from the dropdown list, I got error message
"Could not complete the custom command because the ICC profile is invalid"
Does this mean that the profile is really invalid, or am I doing something wrong?
FYI I am new to color management. This was my first attempt to soft proof an image.

I can't quite figure out how it got that way - it has part of an ICC profile structure, but quite a bit wrong. Even debugging tools can't read it as an ICC profile.
It's probably the one file - let drycreek/costco know so they can replace it.

Could not complete the paste command because there is not enough memory (RAM)

Hi,
Anybody can help me please? i am getting this message again and again. i tried to restart system and re install Photoshop no luck.
"could not complete the paste command because there is not enough memory (RAM)"
will be great if i get reply asap.
Thanks,
Zia

There are no mind readers or clairvoyants in these user forums. Give us a break and provide plenty of details.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Could not complete the last command : problem with toast 10

Similar Messages

Maybe you are looking for