Could not complete the new 3D extrusion because the path is too complex

I'm using Photoshop CS6 in Windows 7 64bit. I've seen other posts about a bug if you are trying to complete a 3D extrusion when a triangle is present, but my issue seems even more basic.
I'm drawing a simple wave shape with the pen tool set to shape, no fill, 1px stroke. I'm simply drawing three points to create a simple sine wave - the idea being to create a wavy piece of 35mm film. The image size is quite big - 6000 x 4000 px. The first time I did it, the rendering worked fine but I didn't like the curve I had drawn, so I stepped back and tried again. Now, whatever I do, I get the "Could not complete because the path is too complex" message.
Is this a known bug and are there any workarounds to create a single pixel wide wavy shape in 3D that looks like a piece of film.
Steve

I have run across this also, but my path was more complex.  As far as creating a single pixel wavy shap, I would use the depth map 3D feature of  converting a depth map to a plane.  Create a gradient in 32bit mode, so the transistion are smooth, and then go to the 3D menu and select new mesh from depth map>plane.  You can later go in and edit the depth map to tweak it.

Similar Messages

  • HT1766 When I started my new iPad 2 I could not start from a previous backup because the os on the new iPad is not the latest 7.x used to backup the previous ipad2  to install the new os I had to start the iPad as new. But now I cannot backup from the pre

    When I started my new iPad 2 I could not start from a previous backup because the os on the new iPad is not the latest 7.x used to backup the previous ipad2  to install the new os I had to start the iPad as new. But now I cannot backup from the previously backup ipad

    Hi there,
    You may find the troubleshooting steps in the articles below helpful.
    iCloud: Troubleshooting restoring an iCloud backup
    http://support.apple.com/kb/ts4036
    iOS: If you can't back up or restore from a backup in iTunes
    http://support.apple.com/kb/ts2529
    -Griff W. 

  • "We could not complete your itunes store request. The network connection could not be established. There was an error in the itunes store. Please try again later."

    When I try to open the home page in my Itunes I get the message "we could not complete your itunes store request. The network connection is not be established. There was an error in the itunes store. Please try again later." It had been working just fine, in fact I had just purchased a song & edited my itunes account. Could changing the name on my account have cause the error message or is something else going on? This is a brand new computer.

    I've got an Apple ID problem, too. All of the sudden in the midnight between August 31st and September 1st, the new apps I picked up on the App Store hung forever 'Waiting..' in my iPhone and never turned 'Loading'. When a substantial amont of time had passed, they reported, they 'could not connect to the App Store' and .. disappeared! Well what they told was not perfectly true because I could however connect to the store as I could browse and pick the apps, but the apps just didn't load. I tried to log into my account in iTunes on my Windows 7 laptop, too, and there got exactly the message in the topic title.
    It appeared later my Apple ID did not completely fail because when I switched from my home WiFi to the phone 3G, everything worked just as nothing happened. Logically, this intimated my WiFi had flaws. Or, some place between my WiFi router and Apple servers did, to be precise. My router was not to blame because I did no changes to it whatsoever.
    All right, it is Saturday today and my ISP is running in unmanned mode meaning no hotline, but I call them on Monday unless the problem disappears by itself. I just wonder what I say, because from non-i-world point of view everything works well, and I know for sure guys in the ISP support don't own any i-stuff, (because they are all android fanatics) . I'm not telling them my Apple ID to let them reproduce the problem on their home equipment, which means I come almost totally proofless.

  • Cannot save as PDF - "Could not save a copy as (filename) because the file is already in use..."

    I have a number of PSD files I've created and I'm trying to save them as PDFs.
    I can Save for Web and Devices, I can save as a .gif, .eps., and every other format I've tested, but I cannot save as a PDF. I get the error:
    "Could not save a copy as (filename) because the file is already in use or was left open by another application."
    I'm running Adobe Master Collection CS5 with Photoshop CS 5.5 (12.0.4 x64) on a Windows 7 64-bit machine.
    I have a 928 GB HD with 697 GB free.
    I have rebooted and tried saving the files immediately after I reboot. I have killed my virus scanner. I have killed a number of other possible culprits including Acrotray.exe and CS5ServiceManager.ext
    I have run Process Explorer as recommended by Microsoft and found no applications using the file. I've also tried saving the file to my external hard drive and/or renaming the file with only rare luck.
    Nothing seems to fix it.
    The boards seem to suggest Adobe isn't taking responsibility for this and pointing it back to the OS or other software. I'm willing to believe them if someone can show me how/where to kill whatever process it is - but at this point, all my indicators point back to Photoshop.

    Here is a clip from a past post where user could not drag and drop files to hard drive.
    To my great relief I have now sorted this issue and offer the following as the Correct Answer. My sincere and grateful thanks go to Curt and Yammer, above, who have helped me so much in sorting this Windows 7 issue which is clearly very relevant to Bridge users also. Any slowness to grasp what they have been saying is down to me!
    The key to solving this issue lies is understanding that in terms of Windows 7 Security, every internal or external hard drive, plus folders, sub-folders and files thereon has an OWNER. Also each OWNER has a certain level of PERMISSION to do things such as moving files to a different folder, deleting or re-naming them etc. If you try to do things that you don't currently have Permission to do, that is when you get an ‘Access Denied’ error message. Also your system has an Admistrator or Administrators and at the outset you need to ensure through the Control Panel that you are listed as one of them. .
    If, like me, you didn't realise these things, (and why would you if Microsoft or your computer or hard drive suppliers couldn't be bothered to really make sure you knew about them), then trying to fathom the ‘Access Denied’ problem becomes a stressful and frustrating nightmare as I can testify having spent a week at it!
    The steps that I took to resolve the issue and which I believe now constitute the 'Correct Answer' are as follows:
    First make sure that you have Administrator rights on your system via the Control Panel
    Next ‘right click’ on the Drive whose files you want to gain full access to, for example the drive that your pictures are stored on, and click on 'Properties'.
    Under the Security tab you will see a list of Groups and Users on this drive and the Permissions that they have to do things.
    Before doing anything to edit these Permissions, first click on the Advanced button. This opens another window with a tab showing the Owner of this drive.
    Click on the Owner tab and if you are not already listed as the owner, make yourself the owner by selecting your name from the list. I believe it should appear there if you are an admistrator or user. (In my case at this stage the owner was initially shown as an obscure string of numbers and letters which I believe identified the drive when it was connected to the lap top I was using before I upgraded my machine)
    Now be sure to check the box that says "Replace Owner on Subcontainers and Objects" and the click Apply. On completion of this step, the drive in question and all the folders, subfolders and files thereon should now be 'owned' by you. You could check this out by right clicking on a particular folder then clicking Properties > Security > Advanced > Owner. Your name should appear. So far so simples!
    Now go back to the Security Tab for your drive (Step 2 / 3 above) and look at the Permissions you currently have. Your aim now is to allow yourself 'Full Control.' If you don’t currently have this level of permission click Edit, select your name on the list, check ‘Full Control’ and 'Apply' the change.
    I think I'm right in saying that at this point whilst still working in the Drive directory you are now given the option of ticking boxes which allow you to, in effect, cascade the permission you have just granted yourself to all the files and folders on that drive. Tick the box to allow this and Windows should then take care of the rest.If I'm not quite correct here then in my particular case, for example, all my images were stored on my external drive. The top level, or 'parent' folder in which all my pictures could be found was the 'My Pictures' folder and I had created a number of folders and subfolders ('child ' folders) within that folder. The permissions I gave to the Parent folder – My Pictures – were cascaded down through the Child folders.
    On completion of the above step I tested the result in Windows Explorer by dragging a few files back and forth between folders and it now worked perfectly - I was now able to move / delete / rename etc all files without now getting the dreaded access denied message. What a sense of relief! This meant that I could now open Bridge normally rather than having to right click it and 'Run As Admistrator' - albeit that is a very useful thing to do until you get the problem sorted as described.

  • We could not complete your iTunes Store request. The iTunes Store is temporarily unavailable. Please try again later.

    Please can someone help. I keep on getting this when I try and buy a song or upgrade my iPhone aps. I have got the latest iTunes on my 15" MacBook Pro with OS X 10.8.5 (12F37). Last week I changed my password on //appleid.apple.com I could the access my account in iTunes. I have tried to log on to my account / view my account in itunes / buy a song and tried upgrading my apps, but I can't do anything now. it is frustrating. Please, please, please can someone help. :-)

    Unsure if this will help anyone but I had the same problem with the message always coming up when I tried to login: "We could not complete your iTunes Store request. The iTunes Store is temporarily unavailable. Please try again later."
    What I couldn't understand was that I could log into iTunes online, but not through the iTunes app, becoming very frustrated I went to drastic measures to get everything working again - although I found this post after I had success.
    To add to the issue, my iPhone (4S - iOS7) was visible on iTunes (latest version), but some of my apps had failed to sync (showing grey on my iPhone and being unable to delete them), causing further issues and adding to my frustrations....which attributed to the drastic measures posted below.
    (You may want to try following the above posts before following my method)
    **** Apple support provided me with an email containing many links, all of which didn't really help me, but I'll post anyway, just incase they assist someone else:
    "Dear Luke,
    Thank you for writing to iTunes Store Customer Support, my name is Indra and I'll be assisting to you with your concern.
    I understand that you are unable to login to your iTunes store account and getting message that the iTunes Store is temporarily unavailable. I can imagine you must be eager to access your account and I will do my best to resolve this issue.
    Luke, as an advisor for the iTunes Store, I handle issues related to billing, downloading, customer accounts, and the items available on the iTunes Store. Although your question falls outside of my area of specialty, I will be happy to assist you with resolving your issue.
    I have verified that the iTunes Store is functioning and accepting connections. The issue could have been temporary, related to your internet connection, your local network, or your computer itself. If you’re still unable to connect, this article outlines some potential solutions:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    These articles have helped other Windows users resolve connection issues:
    iTunes for Windows: iTunes Store connection troubleshooting
    http://support.apple.com/kb/HT1527
    iTunes for Windows: Could not establish a secure connection to the iTunes Store
    http://support.apple.com/kb/TS1470
    iTunes for Windows: can't access the Internet if proxy settings are incorrect
    http://support.apple.com/kb/TS1490
    iTunes: Troubleshooting security software issues
    http://support.apple.com/kb/TS3125
    Firewall, virus-protection, and web-acceleration software can prevent you from connecting to the iTunes Store. You might not be able to connect even if the software appears to be configured to allow full access to the iTunes Store. You can use the MSCONFIG utility to determine if software on your computer is preventing access to the iTunes Store. For detailed instructions, please refer to the following article:
    Using Msconfig to troubleshoot conflicts in Windows Vista and Windows 7
    http://support.apple.com/kb/HT2292
    If the articles above don't help you connect to the iTunes Store, I suggest testing to see if this issue occurs while you are signed in to a new user account on your computer. To learn how to create a new user account in your version of Windows, please read the article below for your operating system:
    How to create and configure user accounts in Windows XP
    http://support.microsoft.com/kb/279783
    Windows Vista: Create a user account
    http://windows.microsoft.com/en-US/windows-vista/Create-a-user-account
    Windows 7: Create a user account
    http://windows.microsoft.com/en-us/Windows7/Create-a-user-account
    Windows 8: Create a user account
    http://windows.microsoft.com/en-us/windows-8/create-user-account
    Once you are signed in to this new user account, open iTunes and try to connect to the iTunes Store. If you can connect without error, then you’ve identified that the issue is with the previous user account that you were using. You may want to consider adopting this new account as your user account and transferring your files from the old account to your new one.
    If you require more assistance, you may wish to call our AppleCare technical support team. A technical Advisor will be able to tell you about Apple's complimentary and fee-based support options as well as assist you in determining what option might be most helpful in this case. To find the appropriate phone number, please visit:
    Contacting Apple for support and service
    http://support.apple.com/kb/HE57
    I hope that the information provided above is helpful.
    Thank you for contacting us and have a nice day!
    Sincerely,
    iTunes Store Customer Support
    http://www.apple.com/support/itunes/ww/"
    But if the above doesn't work for you then you can follow my method...in the end, I perfomed the following actions which did work:
    1).  Uninstalled iTunes from my computer (via Control Panel > Programs & Features)
    2).  Located the iTunes folder containing media, Previous Libraries etc (normally located under your Music folder) and simply moved it to my desktop. (can't afford to delete)
    3). Downloaded iTunes.
    4). Plugged my iPhone into my laptop and moved all contents across to my desktop (photo's).
    5). Restored my iPhone erasing ALL data (extreme but desperate measures were required) - you may want to back it up, but I personally didn't have anything that I couldn't afford to loose on it.
    6). Set-up my iPhone (set language etc...) including iCloud, but did not plug it into my laptop.
    7). Chose the following iPhone settings>   
              > iCloud - Contacts turned off
              > Mail, Contacts, Calendars - iCloud Contacts turned off (same end result)
              > iTunes & App Store - made sure I was logged in via Apple ID.
    7). Closed Outlook.
    8). Re-installed iTunes, saving it on the C:> default location.
    9). Followed the normal iTunes install prompts, setting it up as new. (making sure I had NO apps or music - clean slate)
    10). Plugged my iPhone into my laptop, waiting for it to appear as it normally does.
    11). Checked for iOS updates and iTunes updates (all good)
    12). Checked Sync Contacts with Outlook (opening Outlook at the same time) - Calendars I left to the iCloud
    13). APPLY....once sync finally completed (this time SUCCESSFUL) I was able to click iTunes Store and LOG IN.....finally!
    I probably didn't have to perform all 13 steps, but that's exactly what I did to get everything working again!
    There is probably someone out there who will be able to explain why I couldn't login to iTunes, why many of my apps didn't load onto my iPhone correctly, why everything failed to sync and probably able to shorten the above 13 steps to a quick fix.... but for now, everything is finally working and my 48hrs of frustration has come to an stress free end!

  • "We could not complete your iTunes store request. The connection was reset". Help please!

    Help PLEASE!
    Let me explain my situation:
    - iTunes store has been working fine on all computers for the past few years.
    - Modem gets struck by lightning last Mon.
    - Get a new Netgear modem yesterday.
    - Internet all working fine. Can browse, download etc. in browser (Mac App store, and iDevices App Stores all working fine, too)
    - Cannot connect to iTunes store. Get error "We could not complete your iTunes Store request. The network connection was reset".
    - I Get the same error on 2 MacBooks, but i can browse the store on my 2 Win7 PC's.
    - I managed to connect and browse on my one MacBook using a 3G modem, but still no luck with the ADSL connection.
    - I have tried connecting via wired (ethernet) connection to the modem. Still no luck.
    - I have had this problem on iTunes 10.2, 10.4, 10.5 Beta, and 10.5.
    Does anyone have any idea what is going on here? Any help and advice would be greatly appreciated!
    Thanks!
    George.
    Modem Model no.: DGN 2200

    with everyone downloading the update, the servers are probably bogged down with requests, probably just wait it out and it will start to download and get you back up and runnin
    dante

  • I have completed the OS X upgrade, restart etc. but when attempting to update 8 other Apps to X I get this message: WE COULD NOT COMPLETE THIS UPDATE  Failed to verify the preflight file. It is not signed by Apple?

    I have completed the OS X Maverick upgrade, restart etc. but when attempting to update 8 other Apps to X Maverick I get this message:
    WE COULD NOT COMPLETE THIS UPDATE
    Failed to verify the preflight file. It is not signed by Apple.
    Help!

    Similar threads solve this problem by either creating a new administrator identity, which allows one to update applications, or changing the keychain prefs to Best attempt.  My issue was solved by adding a new admin user, and then updating the apps from the App store using the new identity.  Under my orginal user identity the keychain app would crash when I attempted to open Prefs.  After creating a new identity and updating the applications (iPhoto, etc) I found I was able to open the keychain Prefs logged into my orginal identity.

  • When trying to log on to the iTunes store I get the message 'We could not complete your iTunes store request. The network connection was reset'.

    When trying to log on to the iTunes store I get the message 'We could not complete your iTunes store request. The network connection was reset'.  I can access my account on a different PC but not my own.  Can you advise me as to what I should do please?

    Hello donnafromwakefield,
    The article linked below details steps that can help restore your computer's ability to connect to the iTunes Store.
    Can't connect to the iTunes Store
    http://support.apple.com/en-us/TS1368
    Cheers,
    Allen

  • I can log into my itunes account on my friends computer however for 3 months now she has been getting the following message "We could not complete your iTunes Store request. The iTunes Store is temporarily unavailable. Please try again later" Why is this?

    Hi there I have been trying to help a friend work out why she hasn't been able to access itunes on her home computer for 3 months as it comes up with the following error "We could not complete your iTunes Store request. The iTunes Store is temporarily unavailable. Please try again later"
    I have cleared her crache and dissabled firewalls still no luck. Then I tried logging in with my id and to our surprise it worked. So any assistance would be great. Please find the report below maybe you can help!
    Microsoft Windows XP Professional Service Pack 3 (Build 2600)
    Hewlett-Packard hp workstation xw4200
    iTunes 11.1.1.11
    QuickTime 7.7.4
    FairPlay 2.5.16
    Apple Application Support 2.3.6
    iPod Updater Library 11.1f5
    VoiceOver Kit 1.4.2 (222093/222742)
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 7.0.0.117
    Apple Mobile Device Driver 1.59.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 0012B4A009D5EBF0
    Current user is an administrator.
    The current local date and time is 2013-10-08 22:38:51.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    NVIDIA Quadro FX 540
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 11.1.1.11 is currently running.
    iTunesHelper 11.1.1.11 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:           {CF4127E8-FA53-4985-9CB6-F74A04C92757}
    Description:                 Broadcom NetXtreme Gigabit Ethernet - Packet Scheduler Miniport
    IP Address:                 10.0.0.1
    Subnet Mask:             255.255.255.0
    Default Gateway:       10.0.0.138
    DHCP Enabled:          Yes
    DHCP Server:             10.0.0.138
    Lease Obtained:         Tue Oct 08 22:19:05 2013
    Lease Expires:           Tue Oct 15 22:19:05 2013
    DNS Servers:              10.0.0.138
    Active Connection:    LAN Connection
    Connected:                  Yes
    Online:                          Yes
    Using Modem:            No
    Using LAN:                  Yes
    Using Proxy:               No
    Firewall Information
    Windows Firewall is off.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was unsuccessful.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2013-10-08 22:21:42.

    Same problem. I can see the itunes store so not a problem with windows firewall. The account is active on my iphone so i know i am not locked out. I can connect the PC to my iphone so i know itunes is working ok. It is just logging into itunes on this pc which doesn't work. Only thing I can think of is that the email address I use for my apple id has been offline for a while and is working again now, I'm wondering whether this has been the case for others who are having this issue?

  • I keep getting the follow error messages when I try to sign into iTunes store or redeem a song code: We could not complete your iTunes store request. The network connection could not be established. There was an error in the iTunes store, please try again

    I keep getting the following error messages on my Mac when I try to redeem a song code: "We could not complete your iTunes store request. The network connection could not be established. There was an error in the iTunes store, please try again later."  and then, "We could not complete your iTunes Store request. An unknown error occurred (-50)."

    Hello, constance132. 
    Thank you for visiting Apple Support Communities. 
    Here are some troubleshooting steps that I could recommend when receiving error -50. 
    "Error -50," "-5000," "8003," "8008," or "-42023"
    These alerts occur due to timeouts or conflicts trying to write a file during download.
    If you encounter this issue while accessing iTunes Store:
    See iTunes 9: "One Moment Please" or "Error (-50)" message when accessing iTunes Store
    If you encounter this issue while while downloading something from the iTunes Store:
    Delete your iTunes Downloads folder, located in:
    Mac OS X:
  ~/Music/iTunes/iTunes Media/Downloads   Note: "iTunes Media" may appear as "iTunes Music. Also, the tilde (~) refers to your Home directory.
    Windows Vista:
  \Users\username\Music\iTunes\iTunes Media\Downloads\
    Windows 7:
  \Users\username\My Music\iTunes\iTunes Media\Downloads\
    Windows XP:
  \Documents and Settings\username\My Documents\My Music\iTunes\iTunes Media\Downloads\
    After locating your iTunes Downloads folder:
    Quit iTunes.
    Delete the Downloads folder on your computer.
    Open iTunes.
    Choose Store > Check for Available Downloads.
    Enter your account name and password.
    If you encounter this issue while while downloading Digital Copies using Windows:
    Use MSCONFIG (directions for Windows XP and Windows Vista/Windows 7) to disable conflicting software.
    If using MSCONFIG steps resolves the issue, you may want to use the System Configuration Utility to turn on the third-party System Services and Startup Items one at a time (restarting your computer after turning on the item or items) to identify which System Service or Startup Item is causing the conflict.
    You can turn all of them back on by selecting the Normal Startup option under the General tab of the System Configuration Utility window, but please note that this may cause the issue to reoccur.
    If you are able to isolate the issue to a particular third-party software, you may wish to contact them to let them know of the conflict.
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Cheers,
    Jason H. 

  • HT3275 Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive.  Could not complete backup to media share.  The network backup disk does not support the required AFP feat

    Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive.  "Could not complete backup to media share.  The network backup disk does not support the required AFP features."  What are AFP features and how do I get Time Machine to backup to my current external backup?

    This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).

  • HT4623 My itunes says " we could not complete your itunes store request.  The network connection was resest."  What do I do?

    My itunes says " We could not complete your itunes store request.  The network connection was reset." what do i do?

    All you can do is wait. Apple should have spent the money they allocated toward making iOS all white on network infrastructure to handle the traffic flow during the upgrade rollout.

  • "We could not complete your iTunes Store request. The network connection was lost." ***???

    Thanks for such a great update!!!

    I used to have activation problems. now I am getting same error
    "We could not complete your iTunes Store request. The network connection was lost." "

  • TS1368 When I try to connect to iTunes, it doesn't work and tells me "We could not complete your iTunes Store request. The network connection was reset."

    When I try to connect my newly restored iPhone 4 with iOS 7 on it to iTunes, it doesn't work and tells me "We could not complete your iTunes Store request. The network connection was reset." My network connection is working perfectly fine.

    Hello donnafromwakefield,
    The article linked below details steps that can help restore your computer's ability to connect to the iTunes Store.
    Can't connect to the iTunes Store
    http://support.apple.com/en-us/TS1368
    Cheers,
    Allen

  • TS1424 everytime i try to download an app from itunes, or to 'view all' the apps listed, the error says; 'We could not complete your iTunes Store reuest. The network connection was reset' I used both my desktop and laptop both on Windows 7 Pro, & net is f

    everytime i try to download an app from itunes, or to 'view all' the apps listed, the error says; 'We could not complete your iTunes Store reuest. The network connection was reset' I used both my desktop and laptop both on Windows 7 Pro, & net is fine. please help. is there soemthing wrong with apple store temporarily?

    The latest message is: 'We could not complete your iTunes Store request. The network connection was reset.'
    In between, I got a messge about verifying my payment method. When I tried to submit the details, I kept getting a mmessage stating that my payment method was declined (my card is not near it's expiration date, and works fine).
    Argh!

Maybe you are looking for

  • How to Import an Order via Order Import with multiple shipment lines?

    Good Morning, I have a question concerning Oracle's order import functionality. We are importing orders from an outside system and need to consolidate orders by customer id. So if the same customer places 2 orders for different items on the outside s

  • Multithreading and PreparedStatement

    I am debugging a problem with the interaction between Hibernate and our JDBC driver. Hibernate uses a PreparedStatement to insert values into the database. When it inserts a Timestamp value into the database, it sets the value into the Timestamp obje

  • Doesnt show my phone as an option to sync

    i plugged in my phone to do a restore.. now whern i plug it in it doesnt show it as an option to sync... it just shows it as a "new device" or an additional "restore" Please help

  • Groups duplicated 6 times

    As the header says, my groups are duplicated 6 times each. All Contacts are only one. This occurs on my Macbook Air and iMac but not my iPhone. iCloud has these duplicated groups also. I did have an ME account that I used just for Find My iPhone if t

  • How do I download sabre from my jetnet page. it use to say allow, etc. it doesn't now

    I need to download sabre on my jetnet page. It use to show allow or not allow tab. Now there isn't anything. == This happened == Every time Firefox opened == when I downloaded updated firefox