Could not complete your request because not valid photoshop document

Could not complete your request not valid photoshop documen

Yeah, and what document/ picture? What system? what version of PS? You need to provide a lot more info...
Mylenium

Similar Messages

  • When openong photoshop cs4- could not complete your request because wrong kind of document

    Hi
    I've just installed the free trial of photoshop cs4.. with much difficulty! Firstly it was saying please install adobe file exe? which I don't have a clue how to do. But I managed to install photoshop and thought I was getting somewhere, but now it keeps popping up with couldn't complete your request because it's the wrong kind of document? It allows me to go into photoshop but I can't seem to do anything? Can anyone help?
    I'm a novice with computers so please bear this in mind when you respond. Many thanks

    I found that knowledge-base article and did every step in it...
    I even went beyond... I deactivated CS4, completely uninstalled using AppZapper and then manually went through and tossed every adobe pref file in both users and in system.
    I then reinstalled CS4 from scratch, reactivated, and exact same issue. It happens when running in both the 32, and 64 bit kernel as well.
    It's so odd too... it runs fine for around 40 seconds. I can open a doc, add type, but then that annoying error pop-up comes and it gets stuck in a loop. I can only click on 'OK', which just makes the error window open again. And again, again, etc... you can't escape. The only way to quit is to 'force quit'.

  • Saving a Photoshop CC project from a Mac (in .PSD format) to a thumb drive and trying to transfer it to a Dell laptop with Photoshop CS6.  Will not open...Error message: could not complete your request because it is not a valid photoshop document.

    Saving a Photoshop CC project from a Mac (in .PSD format) to a thumb drive and trying to transfer it to a Dell laptop with Photoshop CS6.  Will not open...Error message: could not complete your request because it is not a valid photoshop document.

    The file was corrupted somewhere along the way (assuming it was still readable on the Macintosh).
    The platforms don't matter, but you still need file transfer that doesn't corrupt files...

  • "Error: Could not complete your request because it is not a valid Photoshop document." How can I fix this on a mac?

    I was working on a project and I closed it after saving and closed photoshop. Then later when I came to make another adjustment to my PSD I opened the file and it said "Could not complete your request because it is not a valid Photoshop document." How can I fix this? I didn't shut off my mac while saving it. Someone please help

    Okay, I just talked to the person that originated the document.
    When this usually happens to me, it's because I've done something stupid like saved a .jpeg as a .psd. So that's what I tried. I tried a few other extensions as well, so I thought that it was not an extension problem. Well, the originator told me it had originally been a TIFF, which was the ONE FILE EXTENSION I DIDN'T TRY. :\
    Anyway, that fixed it. Usually this error indicates either a corrupt file or the wrong extension, just in case anyone ever digs this convo up later.

  • Adobe photoshop CS6.Receiving the error "could not complete your request because it is not a valid photoshop document? Tried renaming the files and had working psd files and now all psd files will not open and getting the error listed. Anyone help please?

    Could not complete your request because it is not a valid photoshop document. Tried renaming the file extensions and still no luck.

    Nobody can tell you anything without proper system info or other technical details.
    Mylenium

  • "Could not complete your request because it is not a valid Photoshop document"?

    Hi
    i am getting this error  "Could not complete your request because it is not a valid Photo shop document"
    i am using CS 5 . PSD files are from different sources. some are saved by me and some are from INTERNET . all files was working fine 3 weeks ago .
    i moved them to external hard drive.I installed window 7 and moved all files from hard disk to My PC ( there was no error while moving files from HD to PC)
    Now when i try to open  it shows "Could not complete your request because it is not a valid Photoshop document"?
    here is file link  Download 36-web-buttons-collection.psd from Sendspace.com - send big files the easy way
    i did try many PSD repair  software but nothing works
    please help me . i need those file very badly
    regards
    sahil !
    (please ignore my bad English)

    It is only showing as a psd file in Windows, because it merely happens to have the extension ".psd". That does not mean that the file is an actual Photoshop file.
    You could rename it to a file with a zip extension, and Windows would think it is an archive.
    The extension means nothing unless the actual file data is written as a psd. And in this case it is not. You have file that is NOT a psd, with a file extension ".psd".
    Show or hide file name extensions - Windows Help

  • "Could not complete your request because it is not a valid Photoshop document." Error

    Hey,
    I've been getting the "Could not complete your request because it is not a valid Photoshop document." error in one of my PSDs.
    Here are just some notes:
    The original file type is .psd, not a tiff whatsoever, and the file extension is purely myfilename.psd, not other random weird name
    PSD file (in case you need it): https://www.mediafire.com/?1xkz2aki87p3kqc
    I did not update my Photoshop or anything
    It'd be great if solutions were suggested, I need this PSD file recovered desperately for a project.
    Thanks

    Very well. Try this with your Mac:
    Open "new.psd" in Preview
    File > Save
    new.psd becomes new.png  If the extension was correct, Preview would not have changed it.
    it now opens in Photoshop  You can download it here.  ("Save image As...)
    Simply put, you had the wrong extension.

  • Could not complete your request because its is not valid photoshop document !!

    Could not complete your request because its is not valid photoshop document !!
    Please help me to open this fle.
    Check the attachment

    lets try the same

  • Could not complete your request because it is not a valid photoshop document why this error coming p

    could not complete your request because it is not a valid photoshop document why this error coming photoshop cs5

    Thanks for clarifying. 
    My bad. I thought you had an even older Mac Pro1,1 like mine, which will not run Mountain Lion.  I should have payed closer attention to your RAM specs.

  • Type layer error: Could not complete your request because of a program error.

    I am trying to rebuild text in a photo. I clicked the type tool, clicked on the background layer (knowing a new one should form) and got this error:
    Could not complete your request because of a program error.
    Then I made a new blank layer, clicked on it and got the same error.
    I quit, relaunched started typing the new layer without a hitch. But when I selected to change the font (to any font), I got the same error
    I switched to Firefox to search for the problem and went back to PSCS5. Now I can change the font! After switching applications and clicking on the type layer, I get the error again! Then it's fixed. Then it comes back.
    Anyone have this problem or a solution?
    I'm using Mac OS 10.5.8 with PSCS5 12.0.1

    Most likely you have a corrupt font which is causing problems for some of the type/font code.
    Try validating your fonts with FontBook as a first step.

  • Photoshop CC 2014 - "Could not complete your request because something prevented the text engine from being initialised".

    This problem has just started, only with CC 2014. It doesn't happen with CC or CS6.
    When I open a particular layered file, then Duplicate it, then close the original Master file I get the "text engine" warning box when I try to enter text in the copy file.
    If I enter text in the original Master file - no problem.
    If the Master file is still open and I try to enter text in the copy file  - no problem.
    I've validated all my fonts in Font Book, deleting all the duplicates and one corrupt font. No change to problem.
    I've gone to User/Library/Application Support/Adobe/Adobe Photoshop CC2014/ and trashed the CT Font Cache folder. No change to problem.
    I've run PS Update.
    Running OS 10.9.3.
    Any suggestions?

    I'm having the same issue on my work computer. I found this info in Adobe's help section.
    Issue
    When you use the Type Tool, you receive the following error:
    "Could not complete your request because something prevented the text ending from being initialized."
    To the top 
    Solution
    Close Photoshop, clear the font cache, and restart.
    Exit Photoshop.
    In Windows Explorer, navigate to the Users/[user name]/AppData/Roaming/Adobe/Adobe Photoshop CC/CT Font Cache folder.
    Move these two files to the Recycle Bin:
    AdobeFnt_CMaps.lst
    AdobeFnt_OSFonts.lst
    Empty the Recycle Bin.
    Restart Photoshop.
    To the top 
    Additional information
    This issue can occur after you uninstall and reinstall Photoshop several times.
    Text Engine error using type tool in Photoshop CC | Windows 8

  • Error:  "Could not complete your request because of a program error" (photoshop CS2 9.0.2 on MAC OSX

    Today I started my program (photoshop CS2 9.0.2) and opened a JPG file. When I went to print the file the program crashed and closed. When I restarted the program and went to open the file I got this error message, "Could not complete your request because of a program error".
    I have tried several different file types/sizes and all result in the same error message since the program crashed. It will not open any file I try to open. As I indicated above I am using Photoshop CS2 9.0.2 it is on a MAC with OSX 10.4.11.
    I called Adobe and the Rep directed me to Tech Note 331307 and told me to Re-create the Photoshop preferences files. Which I did and restarted the program, but when I tried to open a file (any file) I still get the same error message so it doesn't appear to be the preferences.
    Does anyone have any info as to what the problem may be and how to correct it.
    Thanks

    Thanks for the response. OK... This is the first day I have been able to get back to the problem.
    My system I am running Photoshop on is a Power Mac G4, AGP Graphics ATY Rage 128Pro chip set 16MB VRAM LCD 1280x1024 32-bit color, 500MHz, 1.75GB of memory, 1 MB L2 Cache, 100 MHz Bus Speed. I had installed the latest security update and repaired the permissions the day the problem started.
    Now to day I started the system and went in and created a Guest Account. I logged into the guest account and started Photoshop. Low and behold it worked just fine. So I logged out of guest and logged into my main user account And started Photoshop. Wouldn't you know it.... It works just fine. I can open any file I want with now problems.
    I got to thinking after I had done all of this that I wished I had tried to open a file in Photoshop today prior to creating the guest account to see if it still had the problem in my main user account.
    I did not change anything else on the system and all seems to work fine now. So at his point I am really not sure what the problem was.
    Again thanks for taking the time to respond to this issue.

  • I want to edit my raw images on cs5 photoshop.  But when I go to open the .CR2 file it says  '' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit

    I want to edit my raw images on cs5 photoshop.  But when I go to open the .CR2 file it says 
    '' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information.  '' 
    When I go to updates in photoshop help i try to update photoshop and photoshop camera raw but it then says 
    '' Updates could not be applied the error log file may help you in identifying the problem. Then, try updating again. If the problems persist, contact customer support for further assistance. 
    Photoshop Camera Raw 8.7.1(CS6) There was an error installing this update. Please quit and try again later. Error Code: U44M1I216 ''  
    I dont know how to get around this please help

    CR2 files from which Canon camera?
    Supported cameras are listed here
    Camera Raw plug-in | Supported cameras

  • I keep getting a message saying "Could not complete your request because of a program error"

    I keep getting a message saying ( Could not complete your request because of a program error??
    Does anyone know what this means or how to fix?

    blucoast,
    Can you please be more detailed? When are you getting this - what is causing it? Any specific tool or while starting Photoshop itself?
    Do you see an error number or error code or a report? Can you post that here?

  • Effects not working? "Could not complete your request because of a program error?"

    Hey guys&gals - I have always had this problem when working in RGB/CYMK modes - can anyone help me with that?
    More more importantly, now I am getting in in Grayscale mode as of this morning.
    I run Photoshop 6 V 13.1.2 x64 and just updated it this AM.
    Effects are crucial for my job, so I need this fixed asap!!
    I have tried the ctrl, alt, shift start up to no avail. Restarted, shutdown my PC as well.
    Please advise!
    Thanks,
    blaqgranitelaser

    Found the places I was supposed to - now what? Photoshop isn't crashing... doesn't give me any info other than a box saying "Could not complete your request because of a program error." And I have no choice but to click OK. This only happens when I try to use the layer effects in any color mode. Originally it was only in RGB/CMYK but now also happens in Grayscale.
    I'm not technologically savvy - I know what programs I use, but that is all.

Maybe you are looking for

  • Using core data with a database

    Here is where I am at. I have a trivia app in development that will have over 1000 questions, so a database is inevitable. We recently created a test sqlite database and read in some entries and it worked. We were looking into exploiting the features

  • Datatype mapping problem

    Hi I've have a table with column with int4[] as data type. I have a problem with setting the type of corresponding entity bean field. I still have a message about not proper datatypes - byte array instead of integer[]. To be precise, message is: java

  • Source directory (xyz. text) file needsto be placed inthe Target directory

    Hi Experts, There is a file in the source directory (xyz. text) and I need to place the same file in the Target Directory (xyz. text) without any message transformation. How to get it using XI? Points will be awarded ........... Thanks, Manoj

  • Running multiple scripts

    When an Applescript is run from the Applescript-menu-bar-menu and I start another script it seems as though the first script silently terminates. At least it never finishes. I haven't been able to find out what causes this or how to workaround this.

  • Sleep setting has suddenly gone missing on 20GB 4'th Gen. refit

    When my 20GB, Gen 4, Ipod died, I had the extended warrenty. True to their word, when Apple couldn't fix it, they replaced it. I think the new one they sent me is a refit, but it has worked fine until now. For whatever reason the "sleep" setting has