Could not configure Remote Debugging (JDev - AS 10g)

I'm trying to make work remote debugging from JDeveloper 10.1.2 on Oracle AS 10g, but I'm stuck. I tried to do every step from JDeveloper help:
1. Create remote debugging process.
- Done (I hope)
2. In the <jdev_install>/lib directory, copy xmlparserv2.jar to <OC4J_HOME>/lib. In the <jdev_install>/jdev/lib directory, copy ojc.jar and jdev-rt.jar to <OC4J_HOME>/home/lib
- If ORACLE_HOME is C:\Oracle\oracleas, then where is OC4J_HOME ? c:\Oracle\oracleas\j2ee\home ? But it means to create another 'home' directory, right ? But I have already created one OC4J instance called FirstOC4J, where our applications are deployed and it is located in c:\Oracle\oracleas\j2ee\FirstOC4J. Now what ? Which one?
3. Edit global-web-application.xml, but it is both in c:\Oracle\oracleas\j2ee\FirstOC4J\config and in c:\Oracle\oracleas\j2ee\home\config directory. Which one ?
4.Start OC4J in debug mode from a command line
- Why from command line? I always managed our FirstOC4J from Enterprise manager. I tried to put there the parameters from the command
java -ojvm -XXdebug,port4000,detached,quiet -jar oc4j.jar
but parameters inserted into OC4J Options or Java Options were rejected (OC4J wouldn't start). A little succes was running OC4J like this
how to set up for remote debugging?
But it required our FirstOC4J stopped and it meant our application won't run.
Please , could somebody make some step-by-step instructions for begginners or at least comment some above points ? Thanks.

Similar Messages

FPN Could not create remote delta link

Hi everybody,
I am trying to create a Remote Delta Link from producer content (EP Version 7.0 SP11) to consumer (EP Version 7.0 SP14).
I have achieved the following FPN settings/configuration:
SSO Connection in both direction
Connection test is done successfully
Producer registration done successfully
The user is existing in both portals (Producer and Consumer)
But unfortunately I am receiving the following RDL copy and paste error message:
*Could not create remote delta link
Could not connect to producer portal. Please check that the producer portal is running, there are no network problems, and your consumer settings for the producer are configured properly.*
The producer is running.
There are no network problem
and the setting are correct.
Any replay is welcome.
Kind regards,
Rashid
Edited by: Rashid Salem on Aug 25, 2008 4:35 PM
Edited by: Rashid Salem on Aug 25, 2008 4:37 PM

Hi Sascha,
no, there was no changes on the P4 Ports.
The producer and consumer P4 Ports are configured as default ports. Producer P4 Port: 50004 and Consumer P4 Port: 51004.
And if the P4 ports have been changed there is a possibility to enter the P4 Ports values in both Producer and consumer portals:
System Administration > System Configuration > Service Configuration >Applications > ProducerInformationService > Alias To Ports
I tried also this way/possibility without any success ;-(
Any idea how to solve the issue?
Kind regards,
Rashid
Edited by: Rashid Salem on Aug 25, 2008 5:00 PM

Could not get remote version of file.name to compare

Hi All,
Running CS5.5 installed on my new MacPro running 10.6.8.
I have to sites installed. The first one works great including file compare and sync.
On the 2nd site, when I try to do a file compare, I get "Could not get remote version of xxx to compare, where xxx is my selected filename.
As I said, the on the first site, this works perfectly.
I can get files, I can put files, but I cannot compare a file.
I checked the file permissions. They are 755 and the owner is set the similarly to the first site that works.
Another hint is that when I try to sync the site, it tells me that syncronization is not necessary. When I view the files anyway, it shows zero files, even though the show all files checkbox is checked.
Any suggestions would be appreciated.
best regards,
Bill

OK, I fixed this, but not sure how.
I think the cache was corrupt.

HT1695 IPhone 4 could not capture remote Wi-Fi but can capture the network from close range to Ataatjos meter

IPhone 4 could not capture remote Wi-Fi but can capture the network from close range to Ataatjos meter

I tried the process and was happy to note that there was some process that I managed to start because the process did start ...
However to my disappointment, landed back at the same status which says
We're sorry, we are unable to continue with your activation at this time.
Please try again later, or contact customer care
I was using a GEVEY sim unlock with iOS 4.1 since (almost) last 2 yrs now in India on Vodafone. But as Apple designed it, there were several apps including Whatsapp, Facebook, Gmail and LinkedIn that stopped functioning due to the iOS updates and the subsequent (I guess 'mandatory' App updates). Finally yesterday I thought of updating to the iOS 6. As soon as I did that, I have been left with no choice but to see the above message.
The process by jhidrowoh starts corectly but iTunes doesnt give you the option of restore only ... it is forcefully clubbed with update and the button that is displayed in the dialog box that appears on pressing 'Restore' in teh recovery mode, shows 'Restore and Update' and as soon as the iPhone is restored, it automatically updates the iOS as well to iOS 6 and hence leaves you hanging in the stale situation.
Guys ... Need the data desperately ... Can anybody please help???

HT203175 Running Windows 7 64, when installing, I get the error, 'itunes encountered an error and could not configure'. Ideas?

Running Windows 7 64, when installing, I get the error, 'itunes encountered an error and could not configure'. Ideas?

iTunes unknown error 13010

Could not create remote for an EJB

Hello,
We have deployed an App on Sun One 7 that has web as well ejb modules integarted into it. The app deploys properly, However as soon as I try to call a servlet which in turn looks up an EJB (say ClientBean ) it gives me the followign error --->
"Could not create remote for Client Bean"
The entries in the xml files are as follows -
1) In ejb-jar.xml -
<session>
<ejb-name>EUClientBean</ejb-name>
<home>com..ejb.EUClientHomeIF</home>
<remote>com..ejb.EUClientRemoteIF</remote>
<ejb-class>com.ejb.EUClsClientBean</ejb-class>
<session-type>Stateless</session-type>
<transaction-type>Container</transaction-type>
<resource-ref>
<description>database ref</description>
<res-ref-name>test/db</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</session>
2) in sun-ejb-jar.xml --
<ejb>
<ejb-name>EUClientBean</ejb-name>
<jndi-name>ejb/EUClientBean</jndi-name>
<ejb-ref>
<resource-ref>
<res-ref-name>test/db</res-ref-name>
<jndi-name>jdbc/test/db</jndi-name></resource-ref>
<pass-by-reference>true</pass-by-reference>
<bean-pool>
<pool-idle-timeout-in-seconds>0</pool-idle-timeout-in-seconds></bean-pool>
</ejb>
3) In sun-web.xml -
<ejb-ref>
<ejb-ref-name>ejb/test/client</ejb-ref-name>
<jndi-name>ejb/EUClientBean</jndi-name>
</ejb-ref>
4) In web.xml --
<ejb-ref>
<ejb-ref-name>ejb/test/client</ejb-ref-name>
<ejb-ref-type>Session</ejb-ref-type>
<home>com.ejb.EUClientHomeIF</home>
<remote>com.ejb.EUClientRemoteIF</remote>
<ejb-link>EUClientBean</ejb-link>
</ejb-ref>
Actually the same app was working on IAS 6.5.
Any ideas what cud have gone wrong?

Hi Mandar,
Can you post the exception you're getting in your servlet code? Does it happen when the servlet is looking up the ejb or when it tries to create it?
Regards,
Ken

"Could not locate remote server" Error Message

I had to reinstall Adobe Photoshop Elements 5.0 after a virus destroyed my system. Now, when I open Editor (from "Full Edit" in Organizer), I get the following error message:
"Could not locate remote server
http:///???%12?%C3%AF???????????????%12?%12?g"
This problem did not exist before the reinstall. What can I do to stop this error message from being triggered?
Thanks!

I would suggest a complete reinstallation of the software. First uninstall the software using windows uninstaller and then comfirm if the folder c:\Program Files (x86)\Adobe\Photoshop Elements 5\ or c:\Program Files\Adobe\Photoshop Elements 5 whichever applicable has been deleted. After this, install the PSE again

Windows setup could not configure Windows to run on this computer's hardware.

Just over a month ago, I purchased 6 identical Lenovo B5400 laptop computers for a small charity. Each is preconfigured with Windows 7 Professional, with a Win 7 recovery partition, and is supplied with a set of Windows 8 Pro recovery media (the charity
requires Windows 7 installed). I unpacked three laptops, configuring the first one as required by the charity, and using the second and third to experiment with the sysprep / imagex process before applying it to the configured system for migration to the other
laptops. After securing the second and third laptops by taking image backups, I applied sufficient configuration to the second to test the process, then sysprep'd it, and imagex'd it to a network drive, and to a USB stick. So far so good. After using imagex
to apply the custom .wim file to the third laptop, I found it booted up through the "updating registry settings", "starting services", and "installing devices" phases, but when it got to "applying system settings", it
displayed a messagebox titled "Install Windows", with the message "Windows Setup could not configure Windows to run on this computer's hardware". In the last few days, I have explored all the other incidences of problems with similar
symptoms found by a google search, including those on this forum, and tried numerous experiments without getting any further (in most cases not even getting as far)". The sysprep'd image on the second laptop boots ok, going through the same phases up
to "applying system settings", then reboots normally, requests username and PC name, etc, the only defect being that it loses the Realtek display driver (which only takes 2 minutes to restore). I have tried imagex /apply to put the custom .wim file
back on the same laptop it was taken off (the second laptop), and it works exactly the same as it did for the same system immediately after sysprep'ing. The only difference between laptops 2 and 3 is a serial number (QB07523967, and QB07524012). Is there any
reason that this should not work? If it will not, I'm faced with about 100 hours to configure the 6 laptops individually to the charity's requirement.

Hi,
This issue can be caused by hard disk settings in bios or DVD drive or bad SATA cable. Please try those steps below:
Upgrade the BIOS to the latest version; go into the BIOS and activate "Load Fail-Safe Defaults".
If you connect the SATA drives, please set the SATA controller to compatible mode in BIOS.
For more information about this issue, please refer to the article:
http://support.microsoft.com/kb/2466753
Andy Altmann
TechNet Community Support

WDS "windows setup could not configure Windows on this computer's hardware"

I use WDS on a 2008 R2 server to deploy Windows 7 Enterprise with SP1 64-bit custom images to a variety of devices within our enterprise. This has worked flawlessly for two years. I have three desktop models and three laptop models (all HP) that share
a common .wim image. I PXE boot a desktop and choose the image file to deploy. It deploys like magic - until this past week. HP sent us a replacement drive for warranty repair on one computer and on that one PC I started seeing the "Windows setup
could not configure Windows on this computer's hardware" message after deploying Windows 7. The image deploys just fine, the computer reboots just fine, services are set up, all devices are detected. As soon as "Setup is installing devices" hits
100% and the "Setup is applying system settings" phase begins, that message appears. After researching the error and pulling the logs that Microsoft's KB 2466753 describes, it seemed that my problem was related to an "Advanced Format"
disk in that new computer. What I don't get is that they state that this problem was resolved in SP1 (which is what I'm deploying!). So, I started downloading storage drivers to my boot image thinking that maybe a newer driver would fix things. Eventually
(many drivers later), I got the new hard drive to successfully take my Windows 7 image. Here's where it all went to pieces. No sooner had I corrected the problem on that ONE machine, that none of my other machines would successfully re-image. After
2 years of flawless operation, now all my computer models exhibit this same error (except the one with the new replacement drive). After recreating my boot image in WDS (being sure to pull it from a Win 7 SP1 DVD) and adding every driver in WDS practically,
I've gotten all but one particular model to successfully image. No matter what drivers I add (keep in mind, that no drivers have been removed
from WDS during any of this process), the HP z210 desktops I use will not accept the image. Microsoft suggests flipping BIOS settings but why the heck would I want to do that on every machine when their BIOS settings have never been a problem
before this? They also say I should only need to download special Intel drivers if my disks are set up with RAID - which they are not. Anyway, as a test, I inserted a standard Windows 7 Enterprise with SP1 64-bit DVD (same one I used to extract my boot.wim)
and installed Windows on that model with no trouble at all. I only get this error when deploying through WDS. I'm at my wits end and would appreciate any and all help at this point. Thank you!

Hi,
Based on my understanding, the current situation is all other computers deployment is fine but z210 desktops.
If so, it seems like you have the incorrect driver in WDS for that particular computer z210 desktops you used.
I suggest install it from WDS without driver for test.
In addition, you can post this issue in
Setup Deployment to check the WDS setting issue.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Installation problem because errer message of "WINDOWS SETUP COULD NOT CONFIGURE WINDOWS TO RUN ON THIS COMPUTER'S HARDWARE"

Respected Sir,
My name is Md. Naushad, contact No- 9436507010.
Sir, hamara ek shopping mall hain, jismein ek server and 5 nos. cash counter clint pc hein, server ju computer hein ismain hamne WINDOWS SMALL BUSINESS SERVER 2008 original os use kar raha ho, yein server calte hue humnein pehele bhi 3-4 bar format korke
dubara ready kiya tha, job koi problem huta tha tu, kuch din pehele se server mein firse problem ho rahi thi (server open nehi hu rahi thi, tu hamne data backup leke pehele jis tarha se server install kiya tha usi tarha se humne install karne ki kusis ki tha,
tu jab humne windows small business server 2008 software ka original disc-1 se installation start karti hu tu kuch der install huke ek error message aaa rahi hein, ju ki "WINDOWS SETUP COULD NOT CONFIGURE WINDOWS TO RUN ON THIS COMPUTER'S HARDWARE."
yein message aa rahi hein, jiske baad server installation bech mein hi band hi jati hein, jiske karon hum server ready kar nahi pa rahi ho, so plz help me, ta ki mein server ku firse install kar sakti ho.
we wait for ur valuable response, plz help us sir.
Thank u.

Hi,
Sorry for my delay.
Based on the error message, please refer to following similar thread and KB, then check if can help you.
SBS
2008 SP2 " Windows Setup could not configure Windows on this computer’s hardware"
“Windows Setup could not configure Windows on this computer’s
hardware” installation error on a Windows 7-based or a Windows Server 2008 R2-based computer
However,
please understand that these forums will provide support in English. Since we do not familiar with this language which you use to describe this issue, it is very difficult
for us to help you with your question. If you could ask your question in English, I will be very happy to help.
If the issue is urgent to your business, it is recommended that you contact Microsoft Product Support Services
via telephone so that a dedicated Support Professional can assist you recover the server in a more efficient manner. Please be advised that contacting phone support will be a charged call.
To obtain the phone numbers for specific technology request please take a look at the web site listed below.
http://support.microsoft.com/contactus/?ws=support&ln=en-us
If you are outside the US please see
http://support.microsoft.com/ for
regional support phone numbers.
Thanks for your understanding.
Hope this helps.
Best regards,
Justin Gu

"Windows Setup could not configure Windows to run on this computer's hardware" error using MDT

Good day. I am using Microsoft Deployment Toolkit to deploy images to a group of ClearCube R3080D bladed PCs. Below are the server details:
VMware virtual server with Server 2008 R2 Enterprise Service Pack 1
Microsoft Deployment Workbench Version 6.1.2373.0
Management Console 3.0 Version 6.1(Build 7601: Service Pack 1)
Windows Deployment Services Version 6.1.7600.16385
The image I am deploying to the blades is that of Windows 7 Enterprise x64 Service Pack 1 with Office 2010 and a few other third-party applications.
I have pushed this image to literally hundreds of blades successfully. I had a problem with one blade and found that the HDD was faulty. I RMA’d that HDD and installed the replacement. I pushed the same image to the blade and it works fine to the very end
then I receive the error ”Windows Setup could not configure Windows to run on this computer’s hardware.”
I have checked the BIOS configurations on this blade and they are identical to those of several known good blades. In fact, I swapped HDDs between a known good blade and the blade in question. The problem seemed to follow the HDD. Therefore, I assumed that
ClearCube sent a faulty HDD. I had the identical problems with a second HDD from ClearCube so I’m sure that the HDD is fine.
I have read through http://support.microsoft.com/kb/2466753
as well as many other questions posed by other folks and I have yet to find a good solution.
Again, this image works on all other blades that are of the same model and the HDDs are also of the same model. I'm quite confused!
Tony

Tony?
What are you doing posting the same question 5 times, within 3 hours???
http://social.technet.microsoft.com/Forums/en-US/67f72721-da1b-42bc-b373-9064fe1a8245/windows-setup-could-not-configure-windows-to-run-on-this-computers-hardware-error-using-mdt
http://social.technet.microsoft.com/Forums/en-US/9e7ca626-5b67-4a3f-ade0-4bac767e060f/windows-setup-could-not-configure-windows-to-run-on-this-computers-hardware-error-using-mdt
http://social.technet.microsoft.com/Forums/en-US/8c508acc-ad40-4608-911c-fbfbc5e293fe/windows-setup-could-not-configure-windows-to-run-on-this-computers-hardware-error-using-mdthttp://social.technet.microsoft.com/Forums/en-US/a8a98fce-0ddf-4a59-ba8a-9acab7de0c5e/windows-setup-could-not-configure-windows-to-run-on-this-computers-hardware-error-using-mdt
If this post is helpful please click "Mark for answer", thanks! Kind regards

Windows setup could not configure windows to run on this computer hardware

As I was trying to reinstall win 7 on my HP Pavilion dv6-7028tx Enterta laptop, upon competition, I was given this message by win7 saying that " windows setup could not configure windows on this computer's hardwear".
I did some research on this issue, it appeared to be the lack of SATA drivers on my computer.　
Could you please advise me which intel SATA driver should I installed to fix the problem?
If this method doesn’t work, then can you please tell me how to change the BIOS hard disk drive setting to AHCI or IDE?
Many thanks
This question was solved.
View Solution.

Hi:
You can't change the drive controller setting in the BIOS on any HP consumer notebook made in the last 5 - 6 years or so.
See if this works...
Download the drivers from this link below (first file listed -- 64 bit).
https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=23060&keyword=Intel+Rap...
Extract (copy) the files onto a usb flash drive without any folders.
With the flash drive and W7 installation media in the machine, boot from the W7 installation media.
After you select the install now option, select the Drive Options - Advanced menu, then select the Load Driver option.
You should now see the storage driver files listed.
If you check the box, it will only include the compatible driver.
Follow the prompts and hopefully, W7 will install.

MDT deployment "windows could not configure one or more system components"

Hi,
I have successfully deployed a standard Windows 7 image using a combination of WDS and MDT.
Now I want to patch the image with the latest security updates and hotfixes. Using DISM command line I mounted the image, added 125 packages and unmounted the image. Then I put this custom image into MDT and deployed using the same task sequence as the standard
image above.
The deployment nearly finished and the computer reboots. I then get a screen showing an animated progress bar and 'Setup is applying system settings'. Then a pop-up error...
"Windows could not configure one or more system components. To install Windows, restart the computer and then restart the installation".
I have tried with and without injecting drivers into the task sequence (just to rule that out).
Can anyone suggest what the problem might be? A standard image deploys fine. The same image with patches applied fails.
Thanks
Mike.

Hi,
I currently encounter the same issue. I found this link: http://iboyd.net/index.php/2013/01/04/applying-kb2506143-to-an-offline-windows-7-sp1-wim-windows-setup-fail/
At the moment I'm rebuilding my install.wim without the mentioned update, so I'm not able to tell if this resolves my issue, but good chance it will.
If you haven't figured it out yourself at this time, most likely an update will cause these troubles.
Hope this helps...
Regards,
Hugo

WebGate: Could not configure log engine (Linux)

After installing the WebGate on Linux AS 3 with Apache 2.x I am getting the error message in apache error.log:
WebGate: Could not configure log engine
whenever I am trying to access http://localhost
Could anyone offer some suggestion on how to fix it?
Thanks Kris

Thanks for the response. I was using the default version of oblog_config_wg.xml initially. Below is the current one I am using.
I end up with the error in my apache error log every time I navigate to the server from a web browser. The sections I changed are below in bold. Thanks for any insight you can provide.
<CompoundList
xmlns="http://www.oblix.com"ListName="logframework.xml.staging">
<SimpleList>
<NameValPair
ParamName="LOG_THRESHOLD_LEVEL"Value="LOGLEVEL_WARNING">
</NameValPair>
<NameValPair
ParamName="AUTOSYNC"Value="True"></NameValPair>
</SimpleList>
<CompoundList
xmlns="http://www.oblix.com"
ListName="LOG_CONFIG">

<ValNameList
xmlns="http://www.oblix.com"
ListName="LogFatal2Sys">
<NameValPair
ParamName="LOG_LEVEL"
Value="LOGLEVEL_FATAL">
</NameValPair>
<NameValPair
ParamName="LOG_WRITER"
Value="SysLogWriter">
</NameValPair>
<NameValPair
ParamName="LOG_STATUS"
Value="On">
</NameValPair>
</ValNameList>

<ValNameList
xmlns="http://www.oblix.com"
ListName="LogAll2File">
<NameValPair
ParamName="LOG_LEVEL"
Value="LOGLEVEL_ALL">
</NameValPair>
<NameValPair
ParamName="LOG_WRITER"
Value="*FileLogWriter*">
</NameValPair>
<NameValPair
ParamName="FILE_NAME"
Value="*/usr/local/apache2/logs/webgate.log*">
</NameValPair>

<NameValPair
ParamName="BUFFER_SIZE"
Value="131072">
</NameValPair>

<NameValPair
ParamName="MAX_ROTATION_SIZE"
Value="52428800">
</NameValPair>

<NameValPair
ParamName="MAX_ROTATION_TIME"
Value="86400">
</NameValPair>
<NameValPair
ParamName="LOG_STATUS"
Value="On">
</NameValPair>
</ValNameList>
</CompoundList>
</CompoundList>

Windows Could not start remote access auto connection manager

windows Could not start remote access auto connection manager

Hi,
It would be better to provide an ScreenShot for your problem.
Roger Lu
TechNet Community Support

Could not configure Remote Debugging (JDev - AS 10g)

Similar Messages

Maybe you are looking for