Could not connect to DB remotely through Toad using instantclient

Hi All,
Please, i am facing urgent issue while trying to connect to DB remotely through Toad.. Already searched a lot and followed all suggested solutions but without any success..
"instantclient" already downloaded and configured as below :
dll files like "oci.dll,... etc" are here : C:\Oracle\instantclient\instantclient_11_2
Created both tnsnames.ora & listener.ora are here : C:\Oracle\instantclient\network\admin
And did the below in user/system variables :
User Variables :
=========
TNS_ADMIN with value "C:\Oracle\instantclient\network\admin"
System Variables :
===========
TNS_ADMIN with value "C:\Oracle\instantclient\network\admin"
ORACLE_HOME with value "C:\Oracle\instantclient"
Path edited and added this value "C:\Oracle\instantclient\instantclient_11_2"
But i am still facing the below error :
ORA-12541: TNS:no listener
Really, appreciate your help !
Thanks & regards
Mohammed

Mohammed ... wrote:
Thanks all your help and support..
I reconfigured the instant client following below link :
[http://www.dbatoolz.com/t/installing-oracle-instantclient-basic-and-instantclient-sqlplus-on-win32.html]
and followed your advises as well and i can now connect to database though any user
But unfortunately, i cannot connect as sys user, it gave me below error :
C:\Users\mohammed>sqlplus sys as sysdba
SQL*Plus: Release 11.2.0.3.0 Production on Tue May 7 17:29:56 2013
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-12560: TNS:protocol adapter error
C:\Users\mohammed>
Could you please advise..
Regards,
MohammedIf the client is on the same machine as the database, then you don't have ORACLE_SID set.
More likely the database is on a different server, you have to specify 'sqlplus sys/pswd@dbname'.
And your db will need to be configured to allow remote sysdba authorization, which is not a good idea from a security perspective.

Similar Messages

  • Could not connect  to a remote  Oracle db

    Hello ,
    I would to connect with Sqlplus ( Installed Oracle version 9i Release 1 (9.0.1.1.1) for Windows) from my external machine , runnig with Windows XP as OS , to a remote Oracle 10g db installed on a virtual machine running with Ubuntu as OS .
    The same senario should be working in the other direction ( from Ubuntu ( Virtual machine ) to Windows XP ( external machine ) .
    The DBlinks between the two dbs were well created at both sides.
    At Windows side ( external machine ) the tnsnames is already updated .
    At Ubuntu side and in order to allow listener accept remote connections, the following command was executed :
    EXEC DBMS_XDB.SETLISTENERLOCALACCESS(FALSE);
    At Ubuntu side there is no tnsnames file to update .
    I try to connect from both sides to the remote linked db but no result was obtained and the same error occured :
    - From external machine side :
    SQL> select * from Client1@XE;
    select * from Client1@XE
    ERROR at line 1:
    ORA-12154 : TNS: could not resolve the connect identifier specified
    - From virtual machine side :
    SQL> select * from Client4@ING3;
    select * from Client1@XE
    ERROR at line 1:
    ORA-12154 : TNS: could not resolve the connect identifier specified
    I'm not sure , but the reason could be the missing settings that have to be filled in the missing tnsnames file at Ubuntu Side .
    Could you please tell how and where to add the missing tnsnames file at Ubuntu side?
    Thank you
    khaled

    Try replacing
    jdbc:oracle:thin:@SFOServer:1521/DevDB
    with
    jdbc:oracle:thin:@SFOServer:1521:DevDB

  • Could not connect to backend system through portal via Web Dispatcher

    Web dispatcher redirecting problem
    Dear Experts,
    I have implemented a scenario which comprised of customizing that is developed in Portal EP7. What customizing does is getting report from backend system (ERP 6.0)
    According to the needs for reaching the portal from internet I configured the SAP Web Dispatcher in the environment as you may see its contents below.
    The problem is when I run the customizing in portal system then it requires connecting to backend system (ECC 6.0) to get the data (report). But from this point on web browser comes to a blank page, could not view the data that is from backend system via portal. Because in the time when it tries to retrieve data in backend system, on the left bottom of the explorer the indicator shows internet address that system uses connecting to the backend system as local network address of the backend system which is not known in internet therefore I get blank page.
    The question is how to configure the web dispatcher in a way that both portal and backend systems could be reachable from internet?
    Contents of profile file of Web Dispatcher as;
    SAPSYSTEMNAME = WDP
    SAPGLOBALHOST = portald
    SAPSYSTEM = 02
    INSTANCE_NAME = W02
    DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTAMD64
    DIR_EXECUTABLE = $(DIR_CT_RUN)
    Accesssability of Message Server
    rdisp/mshost = portald
    ms/http_port = 8101
    Configuration for medium scenario
    icm/max_conn = 500
    icm/max_sockets = 1024
    icm/req_queue_len = 500
    icm/min_threads = 10
    icm/max_threads = 50
    mpi/total_size_MB = 80
    SAP Web Dispatcher Ports
    #icm/server_port_0 = PROT=HTTP,PORT=81$$
    SAP Web Dispatcher Ports
    icm/server_port_0 = PROT=HTTP,PORT=60000
    icm/HTTP/redirect_0 = PREFIX=/, TO=/irj/index.html
    icm/HTTP/redirect_0 = PORT=50000
    #maximum number of concurrent connections to one server
    wdisp/HTTP/max_pooled_con = 500
    wdisp/HTTPS/max_pooled_con = 500
    Configuration for medium scenario
    icm/max_conn = 500
    icm/max_sockets = 1024
    icm/req_queue_len = 500
    icm/min_threads = 10
    icm/max_threads = 50
    mpi/total_size_MB = 80
    Regards,
    Ali Taner

    Hi,
    To resovle this you must have registered FQDN for your backend system as well. When you call the report from Portal using internet it should call that FQDN of your backend system then DNS will resolve this & you will get the expected page. This way only you can resolve this issue.
    Thanks,
    Sachin Sable

  • Server 2008 TS - some client could not connect to the server

    Hi guys,
    I have a Server 2008 x64 Terminal Server with license server (some machine) and installed device CALs.
    I can connect with Windows 7 client to Terminal Server by RDP (TS assign device CAL to every connected machine automatically) without problem, but I get this error message if I try connection with Motorola (Symbol) MC8080 mobile scanners:
    "Because of a security error, the client could not connect to the remote computer.
    Very that you are logged on the network, and then try connecting again."
    I tried different settings by KB2477176 and activate/deactivate server, but it didn't solve the problem.
    http://support.microsoft.com/kb/2477176/hu
    (These scanners can connecto to another Terminal Server.)
    Is it client or server-side issue?
    Have you another idee?
    Regards,
    Gabor

    Hi,
    Thank you for posting in Windows Server Forum.
    Please again cross check whether you have properly configured certificate attached with the server. Because the error which you are facing is generally due to corrupted certificate on server side. As you have already tried, I again want you to back up the registry
    setting and then remove the X509 certificate registry key under below mention path, restart the computer and reactivate the RD Licensing Server. 
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\RCM
    You can also refer below article for additional information.
    How to resolve the issue “Remote Desktop Disconnected” or “Unable to
    Connect to Remote Desktop (Terminal Server)”
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • SFTP receiver error: putFile: Could not connect to remote host; Reason: Unable to open Sftp client. SshReasonCode: CHANNEL_FAILURE

    Hi,
    When we try to send file over seeburger SFTP (receiver) we are getting the error as below.
    Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: >> Description: SFTP transaction error occured.>> Details: putFile: Could not connect to remote host; Reason: Unable to open Sftp client. SshReasonCode: CHANNEL_FAILURE>>SendingStatus: NOT_TRANSMITTED>>FaultCategory: COMMUNICATION_ERROR>>Retryable: true>>Fatal: true, >> Description: SFTP transaction error occured.>> Details: putFile: Could not connect to remote host; Reason: Unable to open Sftp client. SshReasonCode: CHANNEL_FAILURE>>SendingStatus: NOT_TRANSMITTED>>FaultCategory: COMMUNICATION_ERROR>>Retryable: true>>Fatal: true
    But we are able to connect through filezilla . we are able to create and delete file using the same username and password which is being used in SFTP adapter.
    we have imported the both dsa and rsa keys in SFTP partner folder in NWA. Even though we are getting same error.
    Thanks,
    Vinayak

    Hi Ram,
    we checked with network team and port 22 is open and they are able to ping to the target system.
    we checked the seeburger logs and we see EOF received from remote site error:
    Caused by: com.maverick.ssh.SshException: EOF received from remote side [Unknown cause]
    #at com.maverick.ssh2.TransportProtocol.b(Unknown Source)
    #at com.maverick.ssh2.TransportProtocol.i(Unknown Source)
    #at com.maverick.ssh2.TransportProtocol.nextMessage(Unknown Source)
    #at com.maverick.ssh.message.SshMessageRouter.d(Unknown Source)
    #at com.maverick.ssh.message.SshMessageRouter.access$000(Unknown Source)
    #at com.maverick.ssh.message.SshMessageRouter$_b.run(Unknown Source) 
    Thanks,
    Vinayak.

  • Premiere Elements 8 "Could not connect to remote server" when sharing to YouTube

    I'm trying to share my Adobe Premiere Elements 8 video to YouTube through the task panel, but I get a "Could not connect to remote server" message. My computer is connected to the Internet. I notice at the bottom of the message there is "Open the Opera Help" and "Go to Opera's on-line support desk." I don't have Opera on this computer, so maybe that's it?

    No. You don't need Opera.
    Have you gone to Edit/Preferences and ensured that your Web Services are up to date?
    Otherwise, it could be that YouTube changed settings on us again. If that's the case, you'll need to post to it manually, per the FAQs to the right of this forum.
    http://forums.adobe.com/thread/390608?tstart=30

  • Could not connect to SQL Server 2012 Remotely

    Hello, 
    I have a situation as follows:
    The Server
    SQL Server 2012 Standard Edition installed on Windows Server 2012 Standard Edition
    Active Directory is installed on the same server as well
    Remote Access Role added and configured to connect VPN 
    DNS Role added
    Windows Firewall is disabled
    The Server is connected to the internet 
    SQL Server Service & SQL Browser both are running under domain accounts
    SQL Server allows remote connections
    The Router
    The router that connects the server to the Internet is configured to:
    Enable VPN Tunnels Protocols (PPTP, L2TP and IPSec)
    Forwarding > Virtual Servers (all requests on TCP and UDP on all ports to the server local IP)
    The Client
    PC running Windows 7 SP1 with SQL Server 2012 Express 
    Joined AD on the server
    Connected to the internet
    VPN Connected to the Server
    Can Remote Desktop the Server
    Can ping the server host name
    Can nslookup the server host name
    The Problem
    If Both the Server and the Client are connected in the same Local Area Network, Client can connect to the SQL Serve
    Once the Client is placed in different location connected to the Interent, VPN connected as described above, I could not connect to the Server using:
    Windows Authentication Domain Users or
    SQL Server users
    and the error message is:
    Cannot connect to SERVER\SQLINSTANCE.
    ADDITIONAL INFORMATION:
    A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
    SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
    For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=-1&LinkId=20476
    Any thoughts
    Thanks in advance
     

    Hello Hilary,
    I have been working on a small replication test.
    On the Publisher, things went smooth and the Snapshot Agent was able to work and produce a snapshot written in a shared folder located on the Publisher
    On the Subscriber, as I am testing from SQL Server Express, I had run the following command:
    replmerg.exe -Publisher [SERVER\SQLInstance] -PublisherDB [dbRepl] -PublisherSecurityMode 0 -PublisherLogin rplMergeAgent -PublisherPassword p@ssw0rd -Publication [TEST Publication] -Distributor [SERVER\SQLInstance] -DistributorSecurityMode 0 -DistributorLogin
    rplMergeAgent -DistributorPassword p@ssw0rd -Subscriber [SUBSCRIBER\SQLInstance] -SubscriberSecurityMode 0 -SubscriberLogin rplMergeAgent -SubscriberPassword p@ssw0rd -SubscriberDB [dbRepl] -SubscriptionType 1 -OutputVerboseLevel 2 -Output C:\TEMP\mergeagent.log 
    Where 
    SERVER
    Publisher and Distributor
    dbRepl
    Database to replicate
    Merge Agent
    rplMergeAgent
    Subscriber
    SUBSCRIBER
    dbRepl
    Subscriber Database
    Merge Agent
    rplMergeAgent
    Password
    p@ssw0rd
    rplMergeAgent
    SQL Login defined in both Publisher and Subscriber with same password
    Granted the following at Publisher:
    Login to Publication Database (dbRepl)
    Login to Distribution Database (distribution)
    Member of PAL
    Granted the following at Subscriber:
    db_owner fixed database role in Subscription database (dbRepl)
    I couldn't grant rplMergeAgent Read Permission on SnapshotFolder as it is only a SQL Login.
    When I ran the above command line, I received the following error:
    Message: The schema script 'Person_2.sch' could not be propagated to the subscriber.
    I am pasting below the whole log file written by the above command:
    2014-04-11 15:38:07.205 Microsoft SQL Server Merge Agent 11.0.2218.0
    2014-04-11 15:38:07.342 Copyright (c) 2008 Microsoft Corporation
    2014-04-11 15:38:07.389 
    2014-04-11 15:38:07.406 The timestamps prepended to the output lines are expressed in terms of UTC time.
    2014-04-11 15:38:07.433 User-specified agent parameter values:
    -Publisher SERVER\SQLInstance
    -PublisherDB dbRepl
    -PublisherSecurityMode 0
    -PublisherLogin rplMergeAgent
    -PublisherPassword **********
    -Publication TEST Publication
    -Distributor SERVER\SQLInstance
    -DistributorSecurityMode 0
    -DistributorLogin rplMergeAgent
    -DistributorPassword **********
    -Subscriber SUBSCRIBER\SQLInstance
    -SubscriberSecurityMode 0
    -SubscriberLogin rplMergeAgent
    -SubscriberPassword **********
    -SubscriberDB dbRepl
    -SubscriptionType 1
    -OutputVerboseLevel 2
    -Output C:\TEMP\mergeagent.log
    2014-04-11 15:38:07.497 Percent Complete: 0
    2014-04-11 15:38:07.517 Connecting to Subscriber 'SUBSCRIBER\SQLInstance'
    2014-04-11 15:38:07.518 Connecting to OLE DB Subscriber at datasource: 'SUBSCRIBER\SQLInstance', location: '', catalog: 'dbRepl', providerstring: '' using provider 'SQLNCLI11'
    2014-04-11 15:38:07.608 OLE DB Subscriber: SUBSCRIBER\SQLInstance
    DBMS: Microsoft SQL Server
    Version: 10.50.4000
    catalog name: dbRepl
    user name: rplMergeAgent
    API conformance: 0
    SQL conformance: 0
    transaction capable: 1
    read only: F
    identifier quote char: "
    non_nullable_columns: 0
    owner usage: 15
    max table name len: 128
    max column name len: 128
    need long data len: 
    max columns in table: 1000
    max columns in index: 16
    max char literal len: 131072
    max statement len: 131072
    max row size: 131072
    2014-04-11 15:38:07.613 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': select SERVERPROPERTY ('ProductVersion') 
    2014-04-11 15:38:07.617 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': set nocount on declare @dbname sysname select @dbname = db_name() declare @collation nvarchar(255) select @collation = convert(nvarchar(255), databasepropertyex(@dbname, N'COLLATION')) select
    collationproperty(@collation, N'CODEPAGE') as 'CodePage', collationproperty(@collation, N'LCID') as 'LCID', collationproperty(@collation, N'COMPARISONSTYLE') as 'ComparisonStyle',cast(case when convert (int,databasepropertyex (@dbname,'comparisonstyle')) &
    0x1 = 0x1 then 0 else 1 end as bit) as DB_CaseSensitive,cast(case when convert (int,serverproperty ('comparisonstyle')) & 0x1 = 0x1 then 0 else 1 end as bit) as Server_CaseSensitive set nocount off
    2014-04-11 15:38:07.637 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {?=call sp_helpsubscription_properties (N'SERVER\SQLInstance', N'dbRepl', N'TEST Publication')}
    2014-04-11 15:38:07.681 Distributor security mode: 0, login name: rplMergeAgent, password: ********.
    2014-04-11 15:38:07.682 Percent Complete: 0
    2014-04-11 15:38:07.683 Connecting to Distributor 'SERVER\SQLInstance'
    2014-04-11 15:38:07.684 Connecting to OLE DB Distributor at datasource: 'SERVER\SQLInstance', location: '', catalog: '', providerstring: '' using provider 'SQLNCLI11'
    2014-04-11 15:38:25.062 OLE DB Distributor: SERVER\SQLInstance
    DBMS: Microsoft SQL Server
    Version: 11.00.2100
    catalog name: 
    user name: guest
    API conformance: 0
    SQL conformance: 0
    transaction capable: 1
    read only: F
    identifier quote char: "
    non_nullable_columns: 0
    owner usage: 15
    max table name len: 128
    max column name len: 128
    need long data len: 
    max columns in table: 1000
    max columns in index: 16
    max char literal len: 131072
    max statement len: 131072
    max row size: 131072
    2014-04-11 15:38:28.887 OLE DB Distributor 'SERVER\SQLInstance': select SERVERPROPERTY ('ProductVersion') 
    2014-04-11 15:38:29.842 OLE DB Distributor 'SERVER\SQLInstance': {call sp_helpdistpublisher (N'SERVER\SQLInstance') }
    2014-04-11 15:38:32.198 OLE DB Distributor 'SERVER\SQLInstance': select datasource, srvid from master..sysservers where upper(srvname) = upper(N'SERVER\SQLInstance')
    2014-04-11 15:38:33.199 OLE DB Distributor 'SERVER\SQLInstance': {call sp_MShelp_merge_agentid (0,N'dbRepl',N'TEST Publication',null,N'dbRepl',100,N'SUBSCRIBER\SQLInstance')}
    2014-04-11 15:38:34.451 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:38:34.560 OLE DB Distributor 'SERVER\SQLInstance': {call sp_MShelp_profile (23, 4, N'')}
    2014-04-11 15:38:36.189 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:38:36.499 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_get_redirected_publisher(N'SERVER\SQLInstance',N'dbRepl',0)}
    2014-04-11 15:38:37.396 Percent Complete: 0
    2014-04-11 15:38:37.396 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:38:37.399 Initializing
    2014-04-11 15:38:37.401 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:38:37.403 Connecting to OLE DB Publisher at datasource: 'SERVER\SQLInstance', location: '', catalog: 'dbRepl', providerstring: '' using provider 'SQLNCLI11'
    2014-04-11 15:38:38.427 Percent Complete: 0
    2014-04-11 15:38:38.428 Validating publisher
    2014-04-11 15:38:38.429 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:38:39.455 Percent Complete: 0
    2014-04-11 15:38:39.456 Connecting to Publisher 'SERVER\SQLInstance'
    2014-04-11 15:38:39.457 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:38:46.548 OLE DB Publisher: SERVER\SQLInstance
    DBMS: Microsoft SQL Server
    Version: 11.00.2100
    catalog name: dbRepl
    user name: rplMergeAgent
    API conformance: 0
    SQL conformance: 0
    transaction capable: 1
    read only: F
    identifier quote char: "
    non_nullable_columns: 0
    owner usage: 15
    max table name len: 128
    max column name len: 128
    need long data len: 
    max columns in table: 1000
    max columns in index: 16
    max char literal len: 131072
    max statement len: 131072
    max row size: 131072
    2014-04-11 15:38:50.282 OLE DB Publisher 'SERVER\SQLInstance': set nocount on declare @dbname sysname select @dbname = db_name() declare @collation nvarchar(255) select @collation = convert(nvarchar(255), databasepropertyex(@dbname, N'COLLATION')) select collationproperty(@collation,
    N'CODEPAGE') as 'CodePage', collationproperty(@collation, N'LCID') as 'LCID', collationproperty(@collation, N'COMPARISONSTYLE') as 'ComparisonStyle',cast(case when convert (int,databasepropertyex (@dbname,'comparisonstyle')) & 0x1 = 0x1 then 0 else 1 end
    as bit) as DB_CaseSensitive,cast(case when convert (int,serverproperty ('comparisonstyle')) & 0x1 = 0x1 then 0 else 1 end as bit) as Server_CaseSensitive set nocount off
    2014-04-11 15:38:57.393 OLE DB Publisher 'SERVER\SQLInstance': select SERVERPROPERTY ('ProductVersion') 
    2014-04-11 15:38:59.236 Connecting to OLE DB Publisher at datasource: 'SERVER\SQLInstance', location: '', catalog: 'dbRepl', providerstring: '' using provider 'SQLNCLI11'
    2014-04-11 15:39:07.271 OLE DB Publisher: SERVER\SQLInstance
    DBMS: Microsoft SQL Server
    Version: 11.00.2100
    catalog name: dbRepl
    user name: rplMergeAgent
    API conformance: 0
    SQL conformance: 0
    transaction capable: 1
    read only: F
    identifier quote char: "
    non_nullable_columns: 0
    owner usage: 15
    max table name len: 128
    max column name len: 128
    need long data len: 
    max columns in table: 1000
    max columns in index: 16
    max char literal len: 131072
    max statement len: 131072
    max row size: 131072
    2014-04-11 15:39:45.229 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:39:45.234 Percent Complete: 0
    2014-04-11 15:39:45.235 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:39:45.236 Retrieving publication information
    2014-04-11 15:39:45.238 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:39:46.287 Percent Complete: 0
    2014-04-11 15:39:46.288 Retrieving subscription information.
    2014-04-11 15:39:46.290 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:40:00.472 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:40:00.478 Percent Complete: 0
    2014-04-11 15:40:00.479 Applying the snapshot to the Subscriber
    2014-04-11 15:40:00.480 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:40:02.535 OLE DB Distributor 'SERVER\SQLInstance': select datasource, srvid from master..sysservers where upper(srvname) = upper(N'SERVER\SQLInstance')
    2014-04-11 15:40:03.559 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_mergesubentry_indistdb (0,N'SERVER\SQLInstance',N'dbRepl',N'TEST Publication',N'SUBSCRIBER\SQLInstance',N'dbRepl',1,1,0,N'',?,90)}
    2014-04-11 15:40:04.600 Connecting to OLE DB Subscriber at datasource: 'SUBSCRIBER\SQLInstance', location: '', catalog: 'dbRepl', providerstring: '' using provider 'SQLNCLI11'
    2014-04-11 15:40:04.609 OLE DB Subscriber: SUBSCRIBER\SQLInstance
    DBMS: Microsoft SQL Server
    Version: 10.50.4000
    catalog name: dbRepl
    user name: rplMergeAgent
    API conformance: 0
    SQL conformance: 0
    transaction capable: 1
    read only: F
    identifier quote char: "
    non_nullable_columns: 0
    owner usage: 15
    max table name len: 128
    max column name len: 128
    need long data len: 
    max columns in table: 1000
    max columns in index: 16
    max char literal len: 131072
    max statement len: 131072
    max row size: 131072
    2014-04-11 15:40:04.611 OLE DB Subscriber: SUBSCRIBER\SQLInstance
    DBMS: Microsoft SQL Server
    Version: 10.50.4000
    catalog name: dbRepl
    user name: rplMergeAgent
    API conformance: 0
    SQL conformance: 0
    transaction capable: 1
    read only: F
    identifier quote char: "
    non_nullable_columns: 0
    owner usage: 15
    max table name len: 128
    max column name len: 128
    need long data len: 
    max columns in table: 1000
    max columns in index: 16
    max char literal len: 131072
    max statement len: 131072
    max row size: 131072
    2014-04-11 15:40:07.454 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': sp_MSacquiresnapshotdeliverysessionlock
    2014-04-11 15:40:07.526 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': sp_MStrypurgingoldsnapshotdeliveryprogress
    2014-04-11 15:40:07.530 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': sp_MSissnapshotitemapplied @snapshot_session_token = N'\\SERVER\Snapshot\unc\SERVER$SQLInstance_DBREPL_TEST PUBLICATION\20140411082109\', @snapshot_progress_token = N'\\SERVER\Snapshot\unc\SERVER$SQLInstance_DBREPL_TEST
    PUBLICATION\20140411082109\Person_2.sch'
    2014-04-11 15:40:24.659 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': sp_MSreleasesnapshotdeliverysessionlock
    2014-04-11 15:40:24.663 The schema script 'Person_2.sch' could not be propagated to the subscriber.
    2014-04-11 15:40:24.665 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:40:24.690 Percent Complete: 18
    2014-04-11 15:40:24.692 The schema script 'Person_2.sch' could not be propagated to the subscriber.
    2014-04-11 15:40:24.693 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:40:27.541 Percent Complete: 0
    2014-04-11 15:40:27.542 Category:NULL
    Source:  Merge Replication Provider
    Number:  -2147201001
    Message: The schema script 'Person_2.sch' could not be propagated to the subscriber.
    2014-04-11 15:40:28.563 Percent Complete: 0
    2014-04-11 15:40:28.565 Category:AGENT
    Source:  SUBSCRIBER\SQLInstance
    Number:  0
    Message: The process could not read file '\\SERVER\Snapshot\unc\SERVER$SQLInstance_DBREPL_TEST PUBLICATION\20140411082109\Person_2.sch' due to OS error 1326.
    2014-04-11 15:40:28.566 Disconnecting from OLE DB Subscriber 'SUBSCRIBER\SQLInstance'
    2014-04-11 15:40:28.568 Disconnecting from OLE DB Subscriber 'SUBSCRIBER\SQLInstance'
    2014-04-11 15:40:28.569 Disconnecting from OLE DB Subscriber 'SUBSCRIBER\SQLInstance'
    2014-04-11 15:40:28.570 Disconnecting from OLE DB Subscriber 'SUBSCRIBER\SQLInstance'
    2014-04-11 15:40:28.571 Disconnecting from OLE DB Publisher 'SERVER\SQLInstance'
    2014-04-11 15:40:28.573 Disconnecting from OLE DB Publisher 'SERVER\SQLInstance'
    2014-04-11 15:40:28.575 Disconnecting from OLE DB Publisher 'SERVER\SQLInstance'
    2014-04-11 15:40:28.577 Disconnecting from OLE DB Publisher 'SERVER\SQLInstance'
    2014-04-11 15:40:28.578 Disconnecting from OLE DB Distributor 'SERVER\SQLInstance'
    2014-04-11 15:40:28.579 Disconnecting from OLE DB Distributor 'SERVER\SQLInstance'
    I can say it is about how can the rplMergeAgent read the Shared folder.
    What do you think?

  • Could not connect to remote service [rmi://localhost:1099/

    I have a large deployment with two filr appliances and one database and one search index.
    I am running zen load balancer in front of the appliance which works great.
    There are no config changes to the filr appliances in terms of port redirection.
    I had an issue upgrading from 1.0.1 to 1.1 so I blew it away and started fresh.
    After I installed and configured the appliances there were no issues . Now the :9443 configuration section will not work I get
    (this is just the top lines)
    HTTP ERROR 500
    Problem accessing /. Reason:
    Could not connect to remote service [rmi://localhost:1099/GangliaService]; nested exception is java.rmi.NoSuchObjectException: no such object in table
    Caused by:
    org.springframework.remoting.RemoteConnectFailureE xception: Could not connect to remote service [rmi://localhost:1099/GangliaService]; nested exception is java.rmi.NoSuchObjectException: no such object in table
    at org.springframework.remoting.rmi.RmiClientIntercep torUtils.convertRmiAccessException(RmiClientInterc eptorUtils.java:190)
    at org.springframework.remoting.rmi.RmiClientIntercep tor.doInvoke(RmiClientInterceptor.java:347)
    This is on all appliances (search,data,filr1,filr2)
    I restarted filr2 and the admin section 9443 comes back for a short time. Maybe 10 minutes then I get the same error. But now after the restart I get and authentication box asking for credentials on 8443. when I put in the admin or other creds it directs me to a page that says
    HTTP Status 500 - Filter execution threw an exception
    type Exception report
    message Filter execution threw an exception
    description The server encountered an internal error that prevented it from fulfilling this request.
    exception
    javax.servlet.ServletException: Filter execution threw an exception
    org.kablink.teaming.webdav.servlet.filter.Resource DispatchFilter.doFilter(ResourceDispatchFilter.jav a:87)
    root cause
    java.lang.ExceptionInInitializerError
    java.lang.J9VMInternals.initialize(J9VMInternals.j ava:259)
    org.kablink.teaming.asmodule.spring.security.userd etails.DecryptedPasswordUserDetailsService.loadUse rByUsername(DecryptedPasswordUserDetailsService.ja va:51)
    org.springframework.security.web.authentication.http://www.DigestAuthenticationFilte...lter.java:144)
    org.springframework.security.web.FilterChainProxy$ VirtualFilterChain.doFilter(FilterChainProxy.java: 323)
    org.springframework.security.web.context.SecurityC ontextPersistenceFilter.doFilter(SecurityContextPe rsistenceFilter.java:87)
    org.springframework.security.web.FilterChainProxy$ VirtualFilterChain.doFilter(FilterChainProxy.java: 323)
    org.springframework.security.web.FilterChainProxy. doFilter(FilterChainProxy.java:173)
    org.springframework.web.filter.DelegatingFilterPro xy.invokeDelegate(DelegatingFilterProxy.java:346)
    org.springframework.web.filter.DelegatingFilterPro xy.doFilter(DelegatingFilterProxy.java:259)
    org.kablink.teaming.webdav.servlet.filter.Resource DispatchFilter.doFilter(ResourceDispatchFilter.jav a:87)
    I have rebooted to no avail. If I restart the jetty service I do get the appliance login for 9443 but if I try to login I get the same message about [rmi://localhost:1099/
    again if I reboot then 9443 works for 10 mins but 8443 gets hosed. Everything worked fine until I rebooted the appliance.
    I am afraid to even reboot these appliances now in fear that the will cease to work.
    I should also note that this was part of the upgrade issue I had after I rebooted all of the appliances.
    Thanks in advance.

    Originally Posted by bschilliger
    The same issue here:
    HTTP Status 500 - Filter execution threw an exception
    type Exception report
    message Filter execution threw an exception
    description The server encountered an internal error that prevented it from fulfilling this request.
    exception
    javax.servlet.ServletException: Filter execution threw an exception
    org.kablink.teaming.webdav.servlet.filter.Resource DispatchFilter.doFilter(ResourceDispatchFilter.jav a:87)
    The password in the FILR appliance configuration 'Outbound E-Mail' was too complex (with special characaters). After changing the special characters with letters and/or numbers, the server starts without any troubles!
    Regards from Switzerland,
    Beat

  • HELP!!!   Dreamweaver could not connect you to the remote server"

    Hi all,
    I have been struck by what seems a common problem with
    Dreamweaver/Contribute.
    I get this message when trying to “Enable Contribute
    compatibility” in Dreamweaver:
    “Dreamweaver could not connect you to the remote
    server. You cannot perform Contribute administration tasks without
    a connection to a remote server. Please fix the remote connection
    before continuing.”
    I have read that DW will try to write and delete a file to
    confirm the connection… When I look at the FTP log of DW, it
    confirms that the Temp file has been written and deleted.
    So, it has in fact connected to the remote server...!
    Things I have done to try to eliminate errors includes:
    • Ensure Contribute is not open on the PC.
    • Contacted my ISP to ensure that “/” is
    the “Host directory”
    • Modified the URL in each of the tabs listed below
     Including the Base web address
    Below are the settings I have selected in the Site definition
    window:
    Local info:
    Local root folder: v\website\
    Links relative to Document:
    Http address:
    http://www.website.com
    Remote Info:
    Access FTP
    FTP Host www.website.com
    Host directory /
    Contribute:
    Rollback enabled: Currently off
    CPS enable Currently off
    Site URL:
    http://www.website.com
    I have spoken to my ISP: www.webcentral.com.au
    • They have confirmed that Contribute is used on their
    products by other users.
    • They also stated that they sell Sharepoint as their
    CMS option
    What other things can I try to eliminate this problem?

    Hi,
    Can you please try adding the DNS in your machine where DW
    is running?
    Steps to add:
    1) In the Network Connections, right click Local Area
    Connection.
    2) Select Properties.
    3) Select Internet Protocal (TCP/IP) and click Properties
    button.
    4) Select the radio button Use the following DNS server
    addresses and provide your preferred DNS and Alternate DNS server
    addresses.
    5) Click Advanced button and select DNS tab in the Advanced
    PCT/IP setting dialog.
    6) Select the radio button "Append these DNS suffixes (in
    Order)" and add the values and also add DNS suffix for this
    connection.
    7) Click ok and close all the dialogs.
    Hope this helps.

  • Could not connect to remote service - java.lang.NullPointerException

    Hi,
    I'm struggling to get RMI to work on two servers. Locally my client and server work fine together although when I deploy I get a null pointer exception the first time I try and invoke a remote method. I've tried stopping the server app to see if it is actually connecting at I get a connection refused exception when its stopped so I'm assuming it must be connecting.
    Could not connect to remote service  - java.lang.NullPointerException
    com.jws.remoteServices.RemoteUpdateServer.addNewReport(RemoteUpdateServer.java:61)
    sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
    sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
    java.lang.reflect.Method.invoke(Method.java:616)
    sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:322)
    sun.rmi.transport.Transport$1.run(Transport.java:177)
    java.security.AccessController.doPrivileged(Native Method)
    sun.rmi.transport.Transport.serviceCall(Transport.java:173)
    sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:553)
    sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run0(TCPTransport.java:808)
    sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:667)
    java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1110)
    java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:603)
    java.lang.Thread.run(Thread.java:636)
    sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(StreamRemoteCall.java:273)
    sun.rmi.transport.StreamRemoteCall.executeCall(StreamRemoteCall.java:251)
    sun.rmi.server.UnicastRef.invoke(UnicastRef.java:160)
    java.rmi.server.RemoteObjectInvocationHandler.invokeRemoteMethod(RemoteObjectInvocationHandler.java:195)
    java.rmi.server.RemoteObjectInvocationHandler.invoke(RemoteObjectInvocationHandler.java:149)
    $Proxy0.addNewReport(Unknown Source)
    jasperserver.ReportHandler.run(ReportHandler.java:81)Any help would be greatly appreciated,
    Regards,
    Dan
    Edited by: danblackhust on Jul 18, 2010 3:54 AM

    Show us the code that threw and caught this exception.

  • TS1538 Since my iPhone 4 update I can no longer up date it through my computer I am running windows 7 and before the iPhone update I didn't have any problems now I get the error message iTunes could not connect to this iPhone. An unknown error occurred (0

    Since my iPhone 4 updated I can no longer sync it or charge it with iTunes I get an error message ------>iTunes could not connect to this iPhone. An unknown error occurred (0xE000084)

    From this support document http://support.apple.com/kb/TS3694 see this:
    Unknown Error containing "0xE" when restoring
    To resolve this issue, follow these steps. If you have a Windows computer with an Intel® 5 series/3400 series chipset, you may need updates for your chipset drivers. Learn about issues syncing iOS devices with P55 and related Intel Chipsets.

  • Could not connect to ESS when using vpn or remote connection to network.

    Hi,
    Our users could not connect directly to ESS when they are using vpn or dial-up.  The ESS link would ask for user id and password.  There is no problem when they are directly connected to the office network.  The ESS page will display directly when they click on it.  It will not ask for user id and password. We are using Single Sign-On.
    thanks,
    krbas

    I have solved the problem. 
    The problem was solved by including the url of our server in the exception list of the IE proxy settings of VPN.
    Thanks to me. :-D
    Now.... How can I assign points to myself?

  • TS1368 "iTunes could not connect to the iTunes Store. Make sure your network connection is active and try again."  This article will guide you through the basic troubleshooting for the iTunes Store

    "iTunes could not connect to the iTunes Store. Make sure your network connceiton is active anr try again

    all network conection is working very well

  • EAS Error: Could not connect to Administration Server

    Hi Genius,
    I have installed and configured Hyperion (11.1.2.1) Essbase & Planning successfully on windows server 2008 64 bit. For that I installed Oracle 10g Standard Edition as supported RDBMS. Due to RAM consumption I planned to install the Oracle Express Edition instead of Standard Edition. For that I export the tablespace which contains metadata of Hyperion products from existing database(SE) to current database(XE). After that I reconfigured all the Hyperion Products.
    Once re-configuration completed, I tried to log-in to the Administration Server via EAS Console by providing server name as localhost and username as Admin. Then EAS console throwing error as "Could not connect to Administration server".
    To solve this issue I tried following steps,
    1> Remove the Cwallet.sso and create a new Cwallet.sso by using orapki bat file.
    2> Backup the original ESSBASE.SEC file and rename the ESSBASE.BAK file to ESSBASE.SEC then I started the Essbase Administration service.
    3> I re-installed and re-configured the EAS console.
    After following these steps I am not able to overcome this issue.
    For your kind information,
    1> I can able to login to the Essbase through ESSCMD.
    2> I can able to view the list of essbase applications through Smart View.
    Kindly guide me how to overcome this issue.
    Best Regards
    SC

    Hi John,
    Thanks for your response. I observed the EAS logs clearly and came to know that there were no errors in Hypeas-syserr.log.
    The warnings listed below are mentioned in Hypeas-sysout.log,
    Dec 11, 2013 6:18:46 AM PST> <Info> <Configuration Management> <BEA-150018> <This server is being started in managed server independence mode in the absence of the admin server.><Dec 11, 2013 6:20:56 AM PST> <Notice> <Cluster> <BEA-000197> <Listening for announcements from cluster using unicast cluster messaging>
    <Dec 11, 2013 6:20:56 AM PST> <Notice> <Cluster> <BEA-000133> <Waiting to synchronize with other running members of EssbaseAdminServices.>
    <Dec 11, 2013 6:21:01 AM PST> <Warning> <Log Management> <BEA-170011> <The LogBroadcaster on this server failed to broadcast log messages to the admin server. The Admin server may not be running. Message broadcasts to the admin server will be disabled.>
    <Dec 11, 2013 6:21:26 AM PST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
    <Dec 11, 2013 6:21:26 AM PST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
    <Dec 11, 2013 6:21:50 AM PST> <Notice> <Cluster> <BEA-000162> <Starting "async" replication service with remote cluster address "null">
    <Dec 11, 2013 6:21:50 AM PST> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias DemoIdentity from the jks keystore file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoIdentity.jks.>
    <Dec 11, 2013 6:21:50 AM PST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoTrust.jks.>
    <Dec 11, 2013 6:21:51 AM PST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file C:\Oracle\Middleware\jrockit_160_20\jre\lib\security\cacerts.>
    <Dec 11, 2013 6:21:51 AM PST> <Alert> <Security> <BEA-090152> <Demo trusted CA certificate is being used in production mode: [
    Version: V3
    Subject: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
    Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4 Key: Sun RSA public key, 512 bits
    modulus: 9550192877869244258838480703390456015046425375252278279190673063544122510925482179963329236052146047356415957587628011282484772458983977898996276815440753
    public exponent: 65537
    Validity: [From: Thu Mar 21 12:12:27 PST 2002,
    To: Tue Mar 22 13:12:27 PDT 2022]
    Issuer: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
    SerialNumber: [ 33f10648 fcde0deb 4199921f d64537f4] Certificate Extensions: 1
    [1]: ObjectId: 2.5.29.15 Criticality=true
    KeyUsage [
    Key_CertSign
    Algorithm: [MD5withRSA]
    Signature:
    0000: 9D 26 4C 29 C8 91 C3 A7 06 C3 24 6F AE B4 F8 82 .&L)......$o....
    0010: 80 4D AA CB 7C 79 46 84 81 C4 66 95 F4 1E D8 C4 .M...yF...f.....
    0020: E9 B7 D9 7C E2 23 33 A4 B7 21 E0 AA 54 2B 4A FF .....#3..!..T+J.
    0030: CB 21 20 88 81 21 DB AC 90 54 D8 7D 79 63 23 3C .! ..!...T..yc#< ] The system is vulnerable to security attacks, since it trusts certificates signed by the demo trusted CA.>
    <Dec 11, 2013 6:21:51 AM PST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Dec 11, 2013 6:21:51 AM PST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Dec 11, 2013 6:21:51 AM PST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Dec 11, 2013 6:21:51 AM PST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Dec 11, 2013 6:21:51 AM PST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Dec 11, 2013 6:21:51 AM PST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Dec 11, 2013 6:21:51 AM PST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Dec 11, 2013 6:21:51 AM PST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Dec 11, 2013 6:21:51 AM PST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on fe80:0:0:0:0:5efe:ac10:538:10180 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Dec 11, 2013 6:21:51 AM PST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[3]" is now listening on 127.0.0.1:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Dec 11, 2013 6:21:51 AM PST> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on fe80:0:0:0:40e8:3a49:3d4b:1fd1:10180 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Dec 11, 2013 6:21:51 AM PST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 172.16.5.56:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Dec 11, 2013 6:21:51 AM PST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[4]" is now listening on 0:0:0:0:0:0:0:1:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Dec 11, 2013 6:21:51 AM PST> <Notice> <Server> <BEA-002613> <Channel "Default[4]" is now listening on 0:0:0:0:0:0:0:1:10180 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Dec 11, 2013 6:21:51 AM PST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[2]" is now listening on fe80:0:0:0:40e8:3a49:3d4b:1fd1:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Dec 11, 2013 6:21:51 AM PST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 172.16.5.56:10180 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Dec 11, 2013 6:21:51 AM PST> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on 127.0.0.1:10180 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Dec 11, 2013 6:21:51 AM PST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[1]" is now listening on fe80:0:0:0:0:5efe:ac10:538:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Dec 11, 2013 6:21:51 AM PST> <Notice> <WebLogicServer> <BEA-000358> <Started WebLogic Independent Managed Server "EssbaseAdminServices1" for domain "EPMSystem" running in Production Mode>
    <Dec 11, 2013 6:21:51 AM PST> <Warning> <JMX> <BEA-149510> <Unable to establish JMX Connectivity with the Adminstration Server AdminServer at <JMXServiceURL:null>.>
    <Dec 11, 2013 6:21:56 AM PST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
    <Dec 11, 2013 6:21:56 AM PST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode> 
    Best Regards
    SC

  • ITunes RADIO is not working.  "iTunes could not connect to the iTunes Store. Make sure your internet connection is active and try again." Try as I may, as many as ten attempts, trying to connect after restart, after shutdown, nothing works. Just so -  iTu

    iTunes RADIO is not working.
    “iTunes could not connect to the iTunes Store. Make sure your internet connection is active and try again.” Try as I may, as many as ten attempts, trying to connect after restart, after shutdown, nothing works. Just so …
    iTunes STORE not “connectable” with my otherwise perfectly-working internet connection, viable, up and running for all other uses.
    Simply put, firstly, I can't connect to the internet when I click on Radio.  People are quite suspicious that this is Apple incompetence or your company's famous arrogance for this commonly-suffered problem that you won't or “can’t” fix.
    Read the many web comments and you won’t be pleased with yourselves: the suspicion is that if you ruin internet radio on iTunes, Apple will somehow make more money on music downloads, etc. Bull.
    Also, thirdly, my old playlist of 20 or so internet radio stations in the Ambient category STILL PLAYS !
    Then fourth, I installed the latest available version of QuickTime Player 7.app Version 7.6.6 but it didn’t solve the problem either. I had QuickTime Player.app Version 10.2, but substituted what Apple website said was the latest, LOWER NUMBERED QuickTime Player version of 7.6.6
    Fifth, I can't connect to iTunes store no matter what I do or what user group's advice I try. So I can’t buy or download anything from iTunes. Bad for business.
    Sixth, I updated to the latest version of iTunes but this weird problem remains. All suggested Apple fixes or user group fixes are useless. Where is Apple’s famous technical competency, vaunted customer support?, and user-friendly product reputation? Get it back, please.
    Solve this problem of yours ASAP for us, your numerous disgruntled, dissatisfied customers of iTunes. You can do better, should, and really –in all fairness- must.
    ===============================================================
    NOTE:  no password for iTunes exists in my Keychain. Is this a problem?
    Apple ACCOUNT ID, and iTunes ID password, works but not to access iTunes with my healthy internet connection.
    Apple store id It works via direct internet connetion but not through iTunes.  Very strange.
    ===============================================================
    FYI, Hardware Overview:
      Model Name:                       MacBook Pro
      Model Identifier:                 MacBookPro8,2
      Processor Name:               Intel Core i7
      Processor Speed:               2 GHz
      Number of Processors:    1
      Total Number of Cores:    4
      L2 Cache (per Core):         256 KB
      L3 Cache:                            6 MB
      Memory:                              16 GB
      Boot ROM Version:            MBP81.0047.B27
      SMC Version (system):      1.69f4
      Serial Number (system):   C0*******F8V
      Sudden Motion Sensor:
      State:   Disabled
    Intel 6 Series Chipset:
      Vendor: Intel
      Product:            6 Series Chipset
      Link Speed:       6 Gigabit
      Negotiated Link Speed:           6 Gigabit
      Description:      AHCI Version 1.30 Supported
    M4-CT512M4SSD2:
      Capacity:           512.11 GB (512,110,190,592 bytes)
      Model: M4-CT512M4SSD2                         
      Revision:           040H   
      Serial Number: 0000000012330912E75A
      Native Command Queuing:    Yes
      Queue Depth:   32
      Removable Media:        No
      Detachable Drive:        No
      BSD Name:         disk0
      Medium Type:      Solid State
      TRIM Support:     Yes
      Partition Map Type:     GPT (GUID Partition Table)
      S.M.A.R.T. status:         Verified
      Volumes:
    disk0s1:
      Capacity:           209.7 MB (209,715,200 bytes)
      BSD Name:         disk0s1
      Content:            EFI
    disk0s2:
      Capacity:           511.25 GB (511,250,432,000 bytes)
      BSD Name:         disk0s2
      Content:            Apple_CoreStorage
    Recovery HD:
      Capacity:           650 MB (650,002,432 bytes)
      BSD Name:         disk0s3
      Content:            Apple_Boot
      Volume UUID:   600737FB-7A29-3BAE-859E-CBFE2E90C39A
    <Edited by Host>

    This my sound too simple, but I just kept clikning on the arrow next to the selected music and it finally "Kicked" in.
    I live in Europe ,So Be persistent and don't give up !  Aug. 2013

Maybe you are looking for

  • Apostrophe ( ' ) in the attachment file name

    Hi Guys, We have a EP application where the users are allowed to attach files. In the UAT and Prod box, there is apache server where as its not there in development. The issue is coming in UAT and production The user attached a file with (') in it e.

  • Global key shortcut to play next track while working in another program...

    Is there a key combo that will play the next track regardless of what program you are working in? I know command arrow will do that, but itunes must have focus for that to work. Senerio - I am working in pages and the track playing is not a favorite,

  • Change the name of logical destinations after import Adaptative WebService

    Hello Everybody, I import two Adaptive Web Service in my application with the same names for the logical destinations .... How can i change the name of destination after import a model ? Thanks Rodolphe.

  • Cluster Setup hung

    Hi All,           we are running in production environment. This case is very very critical. I checked thrice the cluster configuration everything seems to be fine. We are using WebLogic Server 5.1 with SP11 in a clustered environment. The operating

  • How to use PSD files as a flash page

    I have read that I can use a psd file in Flash as a "page". At what version does this become possible. Can I take a multi-layer PSD file that was exported from a Flash program and make changes to it in Illustrator and then import it back in as a page