Could not connect to internet after installing PO 8.1.6 on Windows 2000

Hi folks !!
I wish some one could help with this !
After installing PO 8.1.6 on Windows 2000 professional , my computer become unable to connect to the internet. I have a DSL connection. I know that my connection is Ok because I have linux on my computer too and connection to the internet works just fine.

Bugger.
Thank you very much for the info!
Oracle 1.0.4 installed ok and does work - one or two crashes here or there but it does the job.
Rob

Similar Messages

Not connecting to internet after installing os x mavericks. and thus i cannot complete setup

please help
today i installed mavrericks update and now my mac is showing new setup window. but it is not connecting to internet and i cannot sign in to apple account. and it seems like i lost all my data.. please help me. if i lost my data i will be killed.i feel like the new os is not installled properly. is there any way to reinstall it. do i have to download the os x again. please help me. i am in deep problem

Have you looked here:
Re: osx Mavericks can't save scanned documents with hp scanjet

Firefox will not connect to internet after upgrade. The window pops up but shows "connecting " in tab. And then it sit there. Close it down and then try to reopen it and get message " Firefox already running, Exit program or shut down computer" ???

Firefox will not connect to internet after upgrade. The window pops up but shows "connecting " in tab. And then it sit there. Close it down and then try to reopen it and get message " Firefox already running, Exit program or shut down computer" ?????????????????

1st problem see http://kb.mozillazine.org/Firewalls
2nd problem, to close Firefox properly use File > Exit
:not with the [x] in upper right corner which close window
:see http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit
:if restarting use "Restartless Restart" extension as mentioned there.
<br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>

Ipad2 could not connect to itunes after i restore

ipad2 could not connect to itunes after i restore(newest iO7)

Help in here.
iOS: Device not recognized in iTunes for Windows
Or in here.
iOS: Device not recognized in iTunes for OS X - Apple Support
Mac OS X v10.6: iOS device not recognized in iTunes after ...

Itunes could not connect to internet.. i have read all your solution but non help, include firewall, restart dns, check IE setting ETC... PLS HELP, my phone can't sync with itune...........

itunes could not connect to internet.. i have read all your solution but non help, include firewall, restart dns, check IE setting ETC... PLS HELP, my phone can't sync with itune...........

i could not do anything with itune, check updates, help. etc..
i am using windows 7.. and the latest itune, (previous itune also can't sync)

After installed the Lion, my Mac could not connect to internet. At least the my apple Mac turn on second time, then it would connect to the network. Who can tell how to fix it? Thanks!

Since my iMac OSX have installed the Lion last week, my iMac could not connect to the internet in the first turn on, and at least I turn off the computer, and turn it on again, then there is not problem to connect to the internet. So, it take much time to access to network.
Today I called apple store to fix the problem. They rebooted my system with their distance control.By that time, it seems work. But after couple hours later, I turn on my iMac, there is not connection to the network again. I hope someone could help me to solve that problem. Thanks!

I think I would call them back to follow up. As far as they know, everything is fine. But if you call back they can continue from where they were. They usually give a case number either over the phone the first time you called, or in an email later.

Safari and iTunes not connecting to internet after 10.5.3 but firefox does

Hi,
My first post ever. I just updated to 10.5.3 from 10.5.2 After the update, I can not connect to the internet using Safari. I get an error message that I have no internet conection. I ran the network diagnostics and everything was reported as working correctly. I also ran a repair permissions from disc utilities. Still can not connect with Safari. I also noticed that itunes can not download any podcasts. My "software update" in system perferences can not connect either. Firefox has no problem going online.
Any suggesttions on how to proceed?
Thanks

Also worked on 10.4.11. I installed an Airport Express and updated all the software and firmware on my MacBook. After Safari, Itunes store, Google earth could not connect but Firefox was connecting fine. Followed your tip. Disableing the proxies on the Network config does the trick. Very simple but very helpful, thanks.
JC

Lenovo Y50 Not connecting to Internet after windows 10 update

Just as the title says.
I was able to install some windows 10 updates with wifi as my usb modem would not work
After that i can't connect to the internet. I can connect to wifi and it shows internet access but i can't still connect to internet.
One funny thing though i typed ipconfig in cmd and no ip address was found it shows something like media no connected.
All my drivers are upto date. Downloaded directly from lenovo website. And they are all working perfectly according to device manager

Also worked on 10.4.11. I installed an Airport Express and updated all the software and firmware on my MacBook. After Safari, Itunes store, Google earth could not connect but Firefox was connecting fine. Followed your tip. Disableing the proxies on the Network config does the trick. Very simple but very helpful, thanks.
JC

Safari 4 no longer connects to Internet after installing

The Software Update automatically installed Safari 4. Now, Safari 4 errors with "Safari can't connect to the server" regardless of what address (both alphanumeric and numeric) I type in and iTunes errors with "iTunes could not connect to the iTunes Store. The network connection was refused."
However, Firefox is able to access the World Wide Web and I'm still able to access files on my Windows computers on my network.
I've already:
1. Repaired permissions with Disk Utility
2. Tried Safari in a new user account
3. Removed the preferences file
4. Cleared the caches
5. Deleted .com.apple.safari.plist
6. Emptied the trash and restarted the computer
But it still cannot access the Internet. I don't see any option to uninstall Safari 4 and go back to Safari 3.

HI Raymond,
Try using Open DNS.
Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu. Click on TCP/IP and in the box marked 'DNS Servers' enter the following two numbers:
208.67.222.222
208.67.220.220
(An explanation of why that is both safe and a good idea can be read here: http://www.labnol.org/internet/tools/opendsn-what-is-opendns-why-required-2/2587 /
Open DNS also provides an anti-phishing feature: http://www.opendns.com/solutions/homenetwork/anti-phishing/ )
If OpenDNS doesn't work for you, download the 10.4.11 combo update available here.
http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eppc.html
Then repair disk permissions...
Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
Carolyn
Message was edited by: Carolyn Samit

Problems connecting to internet after installing Leopard

I have been having problems connecting to the internet after installing Leopard. I have a G5 at my office and use safari and AOL, using a cable modem and router. Everything worked perfect until I installed Leopard. About 3 days after installing Leopard on my G5 I started having problems connecting to the internet. When opening "network" in preferences it tells me I am connected, but I cannot connect. So I have to restart my computer every time in order to connect. Then to top it off, often in the middle of the day I am able to get and send e-mail with AOL, but my Safari does not connect. And even more bizare, if I am connected and sign off my AOL, I lose Safari as well. Brought the G5 into the Mac store and after trying some stuff they told me "it should work now" but ....same problems. So last Monday, I installed Leopard on my Macbookpro which I use at home wirelessly, everything worked well until yesterday when the same issue with my G5 is happening with the macbookpro. No connection, it tells me I am connected, signal is strong, but nothing.....so restart and keep going. What is going on? Anyone else having same problem? Any solutions
Roberto

Roberto,
Is the install of Leopard on the G5 and MacBook Pro an upgrade install or a clean install?
Try some simple maintenance to see if this resolves it:
1. Run Repair Disk Permissions (Disk Utility)
2. Go to Network Utility and go to Ping enter in www.cnn.com and see if the packets are received/sent. This is just to see if you can get to the outside so to speak
3. See if your cable modem manfacturer has a leopard upgrade. Sometimes hardware companies need to upgrade their firmware when new Operating systems come out

C5 connected to PC..Could not connect to internet

when I connected my C5 phone to PC and tried to connect to internet through Nokia PC Suit new version..
Could not connect ..can you solve this problem?
Thank u in advance

Hey lathee9543,
Best thing would be to download and install the latest version of Ovi Suite suite here:
http://europe.nokia.com/support/product-support/nokia-ovi-suite
Once successfully installed follow the steps to create an internet connection:
Open Nokia Ovi Suite and connect your phone to the computer using a USB cable or Bluetooth connectivity.
Check that your phone is shown as connected at the bottom toolbar of Nokia Ovi Suite.
Select Tools > Connect to internet. Click Yes to confirm that you want to connect to the internet.
Nokia Ovi Suite lets you know when the connection has been created.
To end the connection, select Tools > Disconnect.
If you have problems with connecting, check your connection settings from Tools > Options > Connection settings.
Let me know how it goes

Could not connect to internet even when my cellular data is ON. Have tried the steps mentioned in "trouble shooting cellular data" but still the same issue exists. Can anyone please help me out

I am unable to connect to internet on My iphone 5. I have turned on Cellular data and also 3G but still could not connect.
I have also tried the steps mentioned for touble shooting cellular data, restarted my phone, turned on airplane mode and turned off. removed my sim and inserted back. Still internet connection in not getting connected.
Please can anyone help me out from this issue.
Regards,
Josh

Do you have voice service? If you have voice service but just no cellular data service, I would suggest calling your carrier as you may just have an improperly provisioned account with them, or a bum SIM card.

SOLUTION FOR 3GS WIFI could not connect to internet

i'd try all suggestions but still not able to connect...last month i try to update my iphone 3gs to OS4 but now i experience the wifi could not connect or my cellular could not active....3G appear on my signal
TRY THIS GUYS GO connect your iphone to itunes.
after connecting to itunes go to your phone click GENERAL-SETTING-RESET-RESET ALL SETTING.....your iphone will restart and try connect your wifi...presto it works it..SALAMAT.plS REPLY ANY COMMENTS

If your having trouble connecting or staying connected to wifi try changing your router encryption to WAP2 if its currently Wep

Attendant Console could not connect to server after upgrade

All,
I upgraded a BE CUCM/Unity Connection server from 6.1.2.1000-13 to 6.1.4.2190-3 and after the upgrade, the AC client software could not connect to the CUCM server. After checking all of the obvious things and rebooting the computer on which AC client was running, I finally figured out a workaround. The CUCM server was configured with a host name of UCM1 and a domain of localdomain. The AC clients were pointing to UCM1. If I added a record in the client's hosts file (%WINDIR%\SYSTEM32\DRIVERS\ETC\hosts) which pointed UCM1.localdomain to the IP address of the CUCM server and then pointed the AC client to UCM1.localdomain, everything worked great. I'm just wondering why this happened. The client must pass the name of the server in the payload (rather than simply using the name to resolve to an IP address). So why, all of a sudden, does the server care about the FQDN? Just curious if anybody knows or has run into this same issue.
Regards,
Steven

Hazel,
Any chance you could send me a Wireshark capture of the traffic coming to/from one of the affected client PCs during the login process? Also, please include any log files in the client's AC application folder (or sub-folders) as well as event log data from the system and application event log for the timeframe spanning slightly before and after the login attempt.
Also before doing any of this please clear the DNS and ARP cache of the client PC:
ipconfig /flushdns
arp -d *
Regards,
Steven

Could not connect to server after OS got blue screen, Pls help.

Hi Expert,
i want to ask about this error.
when i'm trying to log in in BO Universe designer.
I'm getting this error.
[repo_proxy 13] SessionFacade::openSessionLogon with user info has failed(Unable to log on: Could not connect to server ekawati-f4e1e59:6400. Please check that the server name is correct, and that the server is running.
(hr=#0x80042a01)
service database and BO is already running.
it's happening after my os got blue screen.
does blue screen affect that much to BO?
how to solve it?
Please advise.
Thanks.
Regards,
Y Permana.

Thanks for your replied.
I checked in manage servers, the [BO server].connectionserver is stopped.
After i checked in services, the database(MySql) service can't turned on if the CMS service is already running.
is that ever happen in your experience?does it happen to other database?
Could you tell me, what priority to turned services whether database, CMS or BO server?
Thanks.
Regards,
Y Permana.

Could not connect to internet after installing PO 8.1.6 on Windows 2000

Similar Messages

Maybe you are looking for