Could not connect to net.tcp://localhost:890/Microsoft.Exchange.Directory.TopologyService
All the Exchange 2013 Prerequisites appeared to install correctly. The installation of Exchange 2013 on Windows Server 2012 hangs at Initializing Setup. Then I find event 4027, source MSExchange ADAccess in the application event log. The
same thing happens if I try to prepare the Active Directory from the command prompt. The old Exchange 2007 server and Active Directory Server are on the same network and all firewalls are off. The entire content of the event is below. Any ideas
appreciated.
Log Name: Application
Source: MSExchange ADAccess
Date: 1/30/2014 12:47:01 PM
Event ID: 4027
Task Category: (1)
Level: Error
Keywords: Classic
User: N/A
Computer: MAILSRV2.sescolighting.com
Description:
The description for Event ID 4027 from source MSExchange ADAccess cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
ExSetupUI.exe
3868
Get Servers for sescolighting.com
TopologyClientTcpEndpoint (localhost)
3
System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://localhost:890/Microsoft.Exchange.Directory.TopologyService. The connection attempt lasted for a time span of 00:00:02.0038715. TCP error code 10061: No connection could be made because
the target machine actively refused it 127.0.0.1:890. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 127.0.0.1:890
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at System.ServiceModel.ICommunicationObject.Open()
at Microsoft.Exchange.Net.ServiceProxyPool`1.GetClient()
at Microsoft.Exchange.Net.ServiceProxyPool`1.TryCallServiceWithRetry(Action`1 action, String debugMessage, WCFConnectionStateTuple proxyToUse, Int32 numberOfRetries, Boolean doNotReturnProxyOnSuccess, Exception& exception)
the message resource is present but the message is not found in the string/message table
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchange ADAccess" />
<EventID Qualifiers="49156">4027</EventID>
<Level>2</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-01-30T17:47:01.000000000Z" />
<EventRecordID>821</EventRecordID>
<Channel>Application</Channel>
<Computer>MAILSRV2.sescolighting.com</Computer>
<Security />
</System>
<EventData>
<Data>ExSetupUI.exe</Data>
<Data>3868</Data>
<Data>Get Servers for sescolighting.com</Data>
<Data>TopologyClientTcpEndpoint (localhost)</Data>
<Data>3</Data>
<Data>System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://localhost:890/Microsoft.Exchange.Directory.TopologyService. The connection attempt lasted for a time span of 00:00:02.0038715. TCP error code 10061: No connection
could be made because the target machine actively refused it 127.0.0.1:890. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 127.0.0.1:890
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at System.ServiceModel.ICommunicationObject.Open()
at Microsoft.Exchange.Net.ServiceProxyPool`1.GetClient()
at Microsoft.Exchange.Net.ServiceProxyPool`1.TryCallServiceWithRetry(Action`1 action, String debugMessage, WCFConnectionStateTuple proxyToUse, Int32 numberOfRetries, Boolean doNotReturnProxyOnSuccess, Exception& exception)</Data>
</EventData>
</Event>
Tina M. White Boundless Data
Hello,
Please make sure whether you install exchange 2013 on a DC server. If so, we don't recommend you install Exchange 2013 server and DC server on a server.
Please use ping to check if the server you will install exchange 2013 server on can communicate with DC server.
Please use telnet to check if 890 port is opened on your firewall.
Besides, please refer to the following article to check if you have installed required components again.
http://technet.microsoft.com/en-us/library/bb691354(v=exchg.150).aspx
Cara Chen
TechNet Community Support
Similar Messages
-
Could not connect to the server "localhost". Need Help!!!!!!
I have installed CF MX 7.0.1 in my Mac (Intel Duo), but, for
some reason I have to configure my "built-in-server" manually!!!
When I tried to access to te configuration wizard @
http://localhost:8500/CFIDE/administrator/index.cfm
I get an error message: Could not connect to the server
“localhost”. Please, help!!!!!!
I uninstalled and reinstalled CF several times... no luck...
I don't have experience with this product and at this point I'm
going crazy!!!
Thanks...
Natacha
Textquote:
Originally posted by:
lyfizgood
I too am having problems with this. I purchased Studio8 and
using the ColdFusion Getting Started tutorial, I get as far as
testing server settings in Dreamweaver. But then when instructed to
enter the RDS password, I get '1. The url specified for this site's
testing server may be incorrect:
http://127.0.0.1:8500/CFIDE/administrator/
2. The testing server may be incorrectly configured (for example,
ColdFusion may not be running).' I have tried not including 8500,
changing to localhost, CFIDE/gettingstarted/tutorial, etc. I have
also checked to see if jrun.exe is running to verify that CF is
running. I assume that is one way of verifying. Any suggestions?
Lyfisgood... youre using windows right? If so you may want to
actually open a second thread... I saythis only as youll probably
get more of a response as there seem to be more peopel running it
on Win than OS X. But ill try and help as much as i can... ive
installed on XP before so maybe ill have something of value to
offer.
Do you have windows firewall or any other firewall running?
Are you sure its actually running on port 8500 as opposed to
8000,8100, 8001? -
[Solved] irexec: could not connect to socket
I am trying to start irexec via .xinitrc which has worked fine for me pre-systemd, but now I am getting the following error:
irexec: could not connect to socket
irexec: no such file or directory
Lirc is running fine, remote works in mythtv.
Here's my .xinitrc
cat ~/.xinitrc
#!/bin/sh
# ~/.xinitrc
# Executed by startx (run your window manager from here)
# exec gnome-session
# exec startkde
# exec startxfce4
# ...or the Window Manager of your choice
#exec xterm
#start irexec
irexec &
#exec /usr/bin/xbmc &
#turn off screensaver
xset s off -dpms
#start xfce4
exec startxfce4
and my lirc
cat /usr/lib/systemd/system/lirc.service
[Unit]
Description=Linux Infrared Remote Control
[Service]
ExecStartPre=/usr/bin/ln -sf /run/lirc/lircd /dev/lircd
ExecStart=/usr/sbin/lircd --pidfile=/run/lirc/lircd.pid
Type=forking
PIDFile=/run/lirc/lircd.pid
[Install]
WantedBy=multi-user.target
and my /etc/conf.d/lircd.conf
cat /etc/conf.d/lircd.conf
# Parameters for lirc daemon
LIRC_DEVICE="/dev/lirc0"
LIRC_DRIVER=""
LIRC_EXTRAOPTS=""
LIRC_CONFIGFILE=""
I tried starting irexec via systemd, too, but that did not work either:
sudo systemctl status irexec.service
irexec.service - IR Exec
Loaded: loaded (/usr/lib/systemd/system/irexec.service; enabled)
Active: inactive (dead) since Sun 2013-04-21 20:17:11 CST; 1s ago
Process: 459 ExecStart=/usr/bin/irexec --daemon (code=exited, status=0/SUCCESS)
Apr 21 20:17:11 frontend systemd[1]: Starting IR Exec...
Apr 21 20:17:11 frontend systemd[1]: Started IR Exec.
cat /usr/lib/systemd/system/irexec.service
[Unit]
Description=IR Exec
After=lirc.service
Wants=lirc.service
[Service]
ExecStart=/usr/bin/irexec --daemon
Type=forking
[Install]
WantedBy=multi-user.target
Any help or pointers will be much appreciated.
Last edited by dafrizz (2013-06-08 23:58:25)Thanks for your help so far. I thought it was the other way around, my mistake,
Still no luck, now I get the following:
sudo systemctl start irexec
Job for irexec.service failed. See 'systemctl status irexec.service' and 'journalctl -xn' for details.
sudo systemctl status irexec
irexec.service - IR Exec
Loaded: loaded (/etc/systemd/system/irexec.service; enabled)
Active: failed (Result: timeout) since Sat 2013-06-08 16:16:17 CST; 10s ago
Process: 11748 ExecStart=/usr/bin/irexec (code=killed, signal=TERM)
Jun 08 16:14:47 frontend systemd[1]: Starting IR Exec...
Jun 08 16:16:17 frontend systemd[1]: irexec.service operation timed out. Terminating.
Jun 08 16:16:17 frontend systemd[1]: Failed to start IR Exec.
Jun 08 16:16:17 frontend systemd[1]: Unit irexec.service entered failed state.
sudo journalctl -xn
-- Logs begin at Sat 2013-04-20 18:36:51 CST, end at Sat 2013-06-08 16:16:44 CST. --
Jun 08 16:15:41 frontend sudo[11759]: pam_unix(sudo:session): session closed for user root
Jun 08 16:16:17 frontend systemd[1]: irexec.service operation timed out. Terminating.
Jun 08 16:16:17 frontend systemd[1]: Failed to start IR Exec.
-- Subject: Unit irexec.service has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Documentation: http://www.freedesktop.org/wiki/Software/systemd/catalog/be02cf6855d2428ba40df7e9d022f03d
-- Unit irexec.service has failed.
-- The result is failed.
Jun 08 16:16:17 frontend systemd[1]: Unit irexec.service entered failed state.
Jun 08 16:16:17 frontend sudo[11745]: pam_unix(sudo:session): session closed for user root -
Could not connect to host localhost on port 21212
Hi Experts,
I am trying to install SAP NW 2004s SR1 with Linux [Red Hat Enterprise Linux AS release 4 (Nahant Update 4)
, Kernel (2.6.9-42.EL)] and Oracle 10.2. I am getting the following error:
=============
SAP NetWeaver
SAPinst Installation GUI
Could not connect to host localhost on port 21212
java.net.ConnectException:Connection refused
Host: localhost
Port 21212
==================
I am using SDK 1.4.2_16.
Kindly help me to resolve go ahead in installation.
Regards.......YogeshHi Yogesh,
The error comes if :-
1. Incorrect version of JDK.
2. Java_Home is not set.
3.The port is already as an old binary is using it.
Please check on the above lines.
Thanks
Pankaj -
Could not connect to host localhost on port 21212 (linux Redhat)
Hi Gurus,
I'm trying to install NW7 on linux Red Hat. After executing SAPinst, the following log executes:
root@sapserver1 IM_LINUX_I386]# ./sapinst
[==============================] | extracting... done!
Starting GUIServer using:
SAPinst port : 21200
GUIServer port: 21212
HTTP port : 4239
GUI autostart : on
GUI mode : normal
command : /tmp/sapinst_exe.4231.1318317961/jre/bin/java -Xmx256M -Dsap.env.var.javahome=SAPINST_JRE_HOME -cp /tmp/sapinst_exe.4231.1318317961/JAR/instgui.jar SDTServer rootdir=/root/.sdtgui config=jar:sdtserver.xml guiport=21212 httpport=4239 -nolock -srvarg=/SAPinstService/host=localhost -srvarg=/SAPinstService/port=21200
init: retrieving account information for group sapinst...
init: retrieving account information done.
load resource pool /mnt/masterinstall/IM_LINUX_I386/resourcepool.xml
guiengine: No GUI server connected; waiting for a connection on host sapserver1, port 21200 to continue with the installation
Oct 11, 2011 7:26:37 AM [Info]: *************************
Oct 11, 2011 7:26:37 AM [Info]: Starting Server
Oct 11, 2011 7:26:37 AM [Info]: Reading server configuration.
Oct 11, 2011 7:26:37 AM [Info]: Reading service configuration SAPinstService.
Oct 11, 2011 7:26:37 AM [Info]: Configuring LogManager ...
Oct 11, 2011 7:26:37 AM [Info]: *************************************************
Oct 11, 2011 7:26:37 AM [Info]: Starting SL Controller listening on port 21212 ...
Oct 11, 2011 7:26:37 AM [Info]: StorageService switched off.
Oct 11, 2011 7:26:37 AM [Info]: Initializing SecurityManager ...
Oct 11, 2011 7:26:40 AM [Info]: Server certificate fingerprint is 92 9F C1 FC 74 60 48 C9 4F 9F 9E 94 C8 E3 BE 40
Oct 11, 2011 7:26:40 AM [Info]: Configuring HTTPManager ...
Oct 11, 2011 7:26:40 AM [Info]: WebstartService switched off.
Oct 11, 2011 7:26:40 AM [Info]: RoleService switched off.
Oct 11, 2011 7:26:40 AM [Info]: AlertService switched off.
Oct 11, 2011 7:26:40 AM [Info]: Starting NotesService ...
Oct 11, 2011 7:26:40 AM [Info]: ProcessService switched off.
Oct 11, 2011 7:26:40 AM [Info]: Starting MIDService ...
Oct 11, 2011 7:26:40 AM [Info]: Starting FileService ...
Oct 11, 2011 7:26:40 AM [Info]: LogService switched off.
Oct 11, 2011 7:26:40 AM [Info]: MailService switched off.
Oct 11, 2011 7:26:40 AM [Info]: Starting services ...
Oct 11, 2011 7:26:40 AM [Info]: Starting service "SAPinstService" ...
Oct 11, 2011 7:26:40 AM [Info]: Service "SAPinstService" started
Oct 11, 2011 7:26:40 AM [Info]: Services started.
Oct 11, 2011 7:26:40 AM [Info]: Starting HTTP server listening on port 4239 ...
Oct 11, 2011 7:26:40 AM [Info]: HTTP server started.
Oct 11, 2011 7:26:40 AM [Info]: SL Controller started.
Oct 11, 2011 7:26:40 AM [Info]: Starting GUI ...
Oct 11, 2011 7:26:40 AM [Info]: /tmp/sapinst_exe.4231.1318317961/jre/bin/java -XX:+HeapDumpOnOutOfMemoryError -Xmx256M -cp /tmp/sapinst_exe.4231.1318317961/JAR/instgui.jar SDTGui host=localhost port=21212 service=SAPinstService -noauth
Oct 11, 2011 7:26:40 AM [Info]: GUI started.
Oct 11, 2011 7:26:46 AM [Info]: >> <<< frog.jar: version 7.20.12 06/06/08 sap.theme: null >>>
===>> At this point the installation program starts and the following message pops up :
Connection to SAPinst refused with the following message:
Connection to SAPinst could not be established, see following messages.
Could not connect to host localhost on port 21212
java.net.ConnectException: Connection refused
java.net.ConnectException: Connection refused
Please correct the error condition and restart.
====>> First, I don't understand why it tries to connect to "localhost" even I defined the host as "sapserver1"
====>> Second, the "tmp/sapinst_exe.4231.1318317961/jre/bin/java -XX:+HeapDumpOnOutOfMemoryError " is confusing me.
Hope this will help resolve my problem.
Thanks and RegardsMarkus,
I have also another hint from SELinux.
When I change the SELinux parametr from Enforced to Permissive, and I run the SAPinst program, the SELinux pops up the following alert:
Summary:
SELinux is preventing java from loading
/tmp/sapinst_exe.6387.1318347447/jre/lib/i386/server/libjvm.so which requires
text relocation.
Detailed Description:
[SELinux is in permissive mode, the operation would have been denied but was
permitted due to permissive mode.]
The java application attempted to load
/tmp/sapinst_exe.6387.1318347447/jre/lib/i386/server/libjvm.so which requires
text relocation. This is a potential security problem. Most libraries do not
need this permission. Libraries are sometimes coded incorrectly and request this
permission. The SELinux Memory Protection Tests
(http://people.redhat.com/drepper/selinux-mem.html) web page explains how to
remove this requirement. You can configure SELinux temporarily to allow
/tmp/sapinst_exe.6387.1318347447/jre/lib/i386/server/libjvm.so to use relocation
as a workaround, until the library is fixed. Please file a bug report
(http://bugzilla.redhat.com/bugzilla/enter_bug.cgi) against this package.
Allowing Access:
If you trust /tmp/sapinst_exe.6387.1318347447/jre/lib/i386/server/libjvm.so to
run correctly, you can change the file context to textrel_shlib_t. "chcon -t
textrel_shlib_t
'/tmp/sapinst_exe.6387.1318347447/jre/lib/i386/server/libjvm.so'" You must also
change the default file context files on the system in order to preserve them
even on a full relabel. "semanage fcontext -a -t textrel_shlib_t
'/tmp/sapinst_exe.6387.1318347447/jre/lib/i386/server/libjvm.so'"
The following command will allow this access:
chcon -t textrel_shlib_t '/tmp/sapinst_exe.6387.1318347447/jre/lib/i386/server/libjvm.so'
====>>> Does it make some sense ?? When do I have to the below command ?
Hope this will help
Regards -
Could not connect to any JRun/ColdFusion servers on host localhost
I am a new CF admin and I am trying to upgrade my Apache. I am following the instructions in http://help.adobe.com/en_US/ColdFusion/9.0/Admin/WSc3ff6d0ea77859461172e0811cbf364104-7fd9 .html but am getting an error. Could not connect to any JRun/ColdFusion servers on host localhost
I am running CF8 on Linux Suse and trying to upgrade apache to version 2.2.22. I am running apache on server-1 and ColdFuson on server-2.
I tried running the following on server1:
/data/jrun4/bin/wsconfig -server cf8-2 -ws Apache -bin /data/web3/apache-2.2.22-general-cf/bin/httpd -script /data/web3/apache-2.2.22-general-cf/bin/apachectl -dir /data/web3/apache-2.2.22-general-cf/conf -coldfusion -v
but got the error.
So then I tried installing apache on server-2 and running:
/data/cf8/bin/wsconfig -server cf8-2 -ws Apache -bin /data/web3/apache-2.2.22-general-cf/bin/httpd -script /data/web3/apache-2.2.22-general-cf/bin/apachectl -dir /data/web3/apache-2.2.22-general-cf/conf -coldfusion -v
I got the exact same error.
CF is definately up and running.
What am I doing wrong?Hi Kiran,
Yes, Coldfusion is running and I have root access. You need
to be root just to get the installer to run and to execute the
Apache connector to produce the error I pasted into my message. My
firewall is disabled, as is SELinux. I'm not sure how to "Write
small program to check socket creation..."
I'm reading through some of the tortured things Steven Erat
had to do to get CF7 running on FC6 here:
http://www.talkingtree.com/blog/index.cfm/2006/12/6/Running-ColdFusion-MX-7-on-Fedora-Core -6-Linux
I suspect I'm running into one of these snags. I was just
wondering if anyone knew if RHEL5 was officially supported yet, or
more concisely, Apache 2.2? -
Could not connect to remote service [rmi://localhost:1099/
I have a large deployment with two filr appliances and one database and one search index.
I am running zen load balancer in front of the appliance which works great.
There are no config changes to the filr appliances in terms of port redirection.
I had an issue upgrading from 1.0.1 to 1.1 so I blew it away and started fresh.
After I installed and configured the appliances there were no issues . Now the :9443 configuration section will not work I get
(this is just the top lines)
HTTP ERROR 500
Problem accessing /. Reason:
Could not connect to remote service [rmi://localhost:1099/GangliaService]; nested exception is java.rmi.NoSuchObjectException: no such object in table
Caused by:
org.springframework.remoting.RemoteConnectFailureE xception: Could not connect to remote service [rmi://localhost:1099/GangliaService]; nested exception is java.rmi.NoSuchObjectException: no such object in table
at org.springframework.remoting.rmi.RmiClientIntercep torUtils.convertRmiAccessException(RmiClientInterc eptorUtils.java:190)
at org.springframework.remoting.rmi.RmiClientIntercep tor.doInvoke(RmiClientInterceptor.java:347)
This is on all appliances (search,data,filr1,filr2)
I restarted filr2 and the admin section 9443 comes back for a short time. Maybe 10 minutes then I get the same error. But now after the restart I get and authentication box asking for credentials on 8443. when I put in the admin or other creds it directs me to a page that says
HTTP Status 500 - Filter execution threw an exception
type Exception report
message Filter execution threw an exception
description The server encountered an internal error that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: Filter execution threw an exception
org.kablink.teaming.webdav.servlet.filter.Resource DispatchFilter.doFilter(ResourceDispatchFilter.jav a:87)
root cause
java.lang.ExceptionInInitializerError
java.lang.J9VMInternals.initialize(J9VMInternals.j ava:259)
org.kablink.teaming.asmodule.spring.security.userd etails.DecryptedPasswordUserDetailsService.loadUse rByUsername(DecryptedPasswordUserDetailsService.ja va:51)
org.springframework.security.web.authentication.http://www.DigestAuthenticationFilte...lter.java:144)
org.springframework.security.web.FilterChainProxy$ VirtualFilterChain.doFilter(FilterChainProxy.java: 323)
org.springframework.security.web.context.SecurityC ontextPersistenceFilter.doFilter(SecurityContextPe rsistenceFilter.java:87)
org.springframework.security.web.FilterChainProxy$ VirtualFilterChain.doFilter(FilterChainProxy.java: 323)
org.springframework.security.web.FilterChainProxy. doFilter(FilterChainProxy.java:173)
org.springframework.web.filter.DelegatingFilterPro xy.invokeDelegate(DelegatingFilterProxy.java:346)
org.springframework.web.filter.DelegatingFilterPro xy.doFilter(DelegatingFilterProxy.java:259)
org.kablink.teaming.webdav.servlet.filter.Resource DispatchFilter.doFilter(ResourceDispatchFilter.jav a:87)
I have rebooted to no avail. If I restart the jetty service I do get the appliance login for 9443 but if I try to login I get the same message about [rmi://localhost:1099/
again if I reboot then 9443 works for 10 mins but 8443 gets hosed. Everything worked fine until I rebooted the appliance.
I am afraid to even reboot these appliances now in fear that the will cease to work.
I should also note that this was part of the upgrade issue I had after I rebooted all of the appliances.
Thanks in advance.Originally Posted by bschilliger
The same issue here:
HTTP Status 500 - Filter execution threw an exception
type Exception report
message Filter execution threw an exception
description The server encountered an internal error that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: Filter execution threw an exception
org.kablink.teaming.webdav.servlet.filter.Resource DispatchFilter.doFilter(ResourceDispatchFilter.jav a:87)
The password in the FILR appliance configuration 'Outbound E-Mail' was too complex (with special characaters). After changing the special characters with letters and/or numbers, the server starts without any troubles!
Regards from Switzerland,
Beat -
Could not connect to localhost
hi
i wonder what's wrong with the J2EE installation. i get both the server and cloudscape started up correctly. but i 'can't deploy the PetStore demo: Could not connect to localhost
then i tried starting the J2EE tutorial, started the deploy toll: it started but the console says: Could not connect to local host
when i call http://localhost:8000 in browser the default J2EE page appears.
what's wrong?
p.s.: how do i assign duke dollars to a topic? can't find anything in the FAQ ...?Hello? Am i the only one with this problem? Today, I reinstalled WSDP and PetStore Demo ... exact same result:
D:\docs\Java\J2EE\petstore1.3.1>setup.bat deploy
Buildfile: setup.xml
init:
deploy:
[echo] Deploying ears ....
[java] Could not connect to localhost
[java] Sender object Deploytool (Main) : Could not connect to localhost
[java] Java Result: 1
[java] Sender object Deploytool (Main) : Could not connect to localhost
[java] Could not connect to localhost
[java] Java Result: 1
[java] Sender object Deploytool (Main) : Could not connect to localhost
[java] Could not connect to localhost
[java] Java Result: 1
[java] Sender object Deploytool (Main) : Could not connect to localhost
[java] Could not connect to localhost
[java] Java Result: 1
[echo] The petstore application is now installed.
[echo] Please restart your cloudscape database and the J2EE server, and the
n point your browser to http://localhost:8000/petstore to access petstore.
BUILD SUCCESSFUL
Total time: 17 seconds
what's the problem? has the current PetStoreDemo a bug? in this case: where can i find an old version of the PetStoreDemo? -
Server admin could not connect to localhost
Hi,
the Problem I have is that I could not connect to the server at localhost. Server admin shows connection error.
Maybe it is a problem with my certificate state. I have deleted the default one and have to recertificate my own one.
Any ideas?Others have posted in the past that the SA or WGM has 'issues' when the default cert is blown away.
Have you considered doing a clean install on another volume, then move the default from that install back into your current one? Just an idea before I've had my first coffee. -
Connection test to database failed: could not connect to server
I restarted one of my HPOV NNMi 9.23 servers this morning and NNMi is no longer loading. I am seeing the following errors in the logs indicated:
/var/opt/OV/log/nnm/public/nmsdbmgr.log
04/06/2015 09:28:05 AM Connection test to database failed: could not connect to server: Connection refused
Is the server running on host "127.0.0.1" and accepting
TCP/IP connections on port 5432?
/var/opt/OV/log/nnm/public/postgres.log
2015-04-06 09:25:55.312 EDT: :8580:0LOG: could not translate host name "localhost", service "5432" to address: Name or service not known
2015-04-06 09:25:55.312 EDT: :8580:0WARNING: could not create listen socket for "localhost"
2015-04-06 09:25:55.312 EDT: :8580:0FATAL: could not create any TCP/IP sockets
I checked /etc/hosts and found the following entry:
#; Local
127.0.0.1 localhost
From the command line I can ping localhost with no issue. Not sure why NNMi is not starting at this point.
This question was solved.
View Solution.I also attempted to do a reset using nnmresetebdb.ovpl. I recieved the following:
Attempting to reset the embedded database...
Starting nmsdbmgr process for database reset...
nmsdbmgr process did not restart successfully - please try reset again.
When I run ovstart -c I receive the following:
Name PID State Last Message(s)
OVsPMD 29831 RUNNING -
pmd 29832 RUNNING Initialization complete.
nmsdbmgr - NOT_RUNNING - Exit(1)
ovjboss - UNSTARTABLE -
nnmaction - UNSTARTABLE -
ovspmd: Attempt to start HP OpenView services is complete.
I definitely need some help with this please!
Thanks! -
Could Not Connect to Security Token Service Application
Receiving the following:
Get-SPSite : Could not connect to http://localhost:32843/SecurityTokenServiceApplication/securitytoken.svc. TCP error code 10061: No connection could be made
I have validated the site and app pool exist and are running... however, browsing to the url returns a 404 page. This is happening on 2/4 servers in my farm.
I have removed SharePoint and Web Server/Application Server Role from each server and re-installed SP to no avail... next step is re-image but thought I would check the blog-o-sphere first...
- Rickany anti virus on the servers?
is there any details about the error after connection could be made?
also have a look: http://blogs.technet.com/b/sykhad-msft/archive/2012/02/25/sharepoint-2010-nailing-the-error-quot-the-security-token-service-is-unavailable-quot.aspx
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
Drop DB control, error: Could not connect to SYS, ORA-12541
Hi All,
I am new to Oracle. I am struggling to solve this problem for 2 days, but still couldn't get it done. I post my problem here and wish every guru in this forum to offer some help. Any suggestions are greatly appreciated.
I have Oracle 10.2.0.3.0 installed on GNU/Linux. There are several instances there. The database, listener, sql/plus all work fine. Yesterday, I installed 10g database control on server. The information showed that dbconsole created successfuly. However, I use the produced url (http:// xxx(hostname):1158/em)in my local machine (Win XP) to connect the databse, and the webpage opened. The information showed that EM couldn't be connected to database, and the status of Listener is unavailable, the inforamtion for agent connect.. is: ORA-12541: TNS:no listener (DBD ERROR: OCIServerAttach).
I googled lots of posts both in this forum and internet and tried to make some changes, but the things get worse. It still didn't work. Even i failed to drop the DB control with the command of emca -config dbcontrol db -repos recreate. the error log information in cfgtoollogs/emca is:
Could not connect to SYS/(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=svv.X.XXX.net)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=ORCL3))): ORA-12541: TNS:no listener (DBD ERROR: OCIServerAttach).
I understand it's the problem related to listener, but i have no idea how to verify it. I put the tns.ora and listener.ora here.
tnsnames.ora:
xxxxx
ORCL3 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.3.149.210)(PORT = 1521))
(CONNECT_DATA =
(SID = ORCL3)
listener.ora
LISTENER =
(ADDRESS_LIST=
(ADDRESS=(PROTOCOL=tcp)(HOST=10.3.149.210)(PORT=1521)))
SID_LIST_LISTENER=
(SID_DESC=
(GLOBAL_DBNAME=ORCL2)
(SID_NAME=ORCL2)
(ORACLE_HOME=/opt/app/oracle/product/10.2)
(SID_DESC=
(GLOBAL_DBNAME=ORCL3)
(SID_NAME=ORCL3)
(ORACLE_HOME=/opt/app/oracle/product/10.2)
The above is the problem description, any suggestion and help are greatly appreciated.
Thanks,
Kind regards,
IanI use the "emca -config dbcontrol db" to config the DB control, but failed. The following is the log information:
This forum doesn't support attch the file. I paste the log file here.
Feb 12, 2009 4:39:18 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: TZ set to GMT
Oracle Enterprise Manager 10g Database Control Release 10.2.0.3.0
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
http://svv-node2-pub.swlab.net:1158/em/console/aboutApplication
Stopping Oracle Enterprise Manager 10g Database Control ...
... Stopped.
Feb 12, 2009 4:39:18 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Feb 12, 2009 4:39:18 PM oracle.sysman.emcp.util.PlatformInterface isInView
CONFIG: IN_VIEW marker not instantiated in /opt/app/oracle/product/10.2/sysman/config/emca.properties
Feb 12, 2009 4:39:18 PM oracle.sysman.emcp.util.PlatformInterface getEnvProps
CONFIG: Returning env array from cache
Feb 12, 2009 4:39:18 PM oracle.sysman.emcp.util.PlatformInterface getSortedEnvArray
CONFIG: New Env List: [CLASSPATH=/opt/app/oracle/product/10.2/jlib/emca.jar:/opt/app/oracle/product/10.2/jlib/srvm.jar:/opt/app/oracle/product/10.2/jlib/srvmasm.jar:/opt/app/oracle/product/10.2/jlib/emConfigInstall.jar:/opt/app/oracle/product/10.2/jlib/ldapjclnt10.jar:/opt/app/oracle/product/10.2/jlib/ldap.jar:/opt/app/oracle/product/10.2/jlib/share.jar:/opt/app/oracle/product/10.2/jlib/srvmhas.jar:/opt/app/oracle/product/10.2/jlib/netcfg.jar:/opt/app/oracle/product/10.2/lib/xmlparserv2.jar:/opt/app/oracle/product/10.2/assistants/jlib/assistantsCommon.jar:/opt/app/oracle/product/10.2/sysman/jlib/emCORE.jar:/opt/app/oracle/product/10.2/oui/jlib/OraInstaller.jar:/opt/app/oracle/product/10.2/oui/jlib/OraPrereq.jar:/opt/app/oracle/product/10.2/inventory/prereqs/oui/OraPrereqChecks.jar:/opt/app/oracle/product/10.2/oui/jlib/OraPrereqChecks.jar:, DYLD_LIBRARY_PATH=/opt/app/oracle/product/10.2/lib32:/opt/app/oracle/product/10.2/lib:/opt/app/oracle/product/10.2/perl/lib, EMDROOT=/opt/app/oracle/product/10.2, G_BROKEN_FILENAMES=1, HISTSIZE=1000, HOME=/home/oracle, HOSTNAME=svv-node2-pub.swlab.net, INPUTRC=/etc/inputrc, KDEDIR=/usr, LANG=en_US.UTF-8, LD_LIBRARY_PATH=/opt/app/oracle/product/10.2/lib32:/opt/app/oracle/product/10.2/lib:/opt/app/oracle/product/10.2/perl/lib:null, LESSOPEN=|/usr/bin/lesspipe.sh %s, LIBPATH=/opt/app/oracle/product/10.2/lib32:/opt/app/oracle/product/10.2/lib:/opt/app/oracle/product/10.2/perl/lib, LOGNAME=oracle, LS_COLORS=no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35:, MAIL=/var/spool/mail/oracle, NLSPATH=/usr/dt/lib/nls/msg/%L/%N.cat, NLS_LANG=AMERICAN_AMERICA.AL32UTF8, ORACLE_BASE=/opt/app/oracle, ORACLE_HOME=/opt/app/oracle/product/10.2, ORACLE_SID=ORCL3, PATH=/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/home/oracle/bin:/home/oracle/bin:/opt/app/oracle/product/10.2/bin, PERL5LIB=/opt/app/oracle/product/10.2/perl/lib:/opt/app/oracle/product/10.2/perl/lib/site_perl:/opt/app/oracle/product/10.2/sysman/admin/scripts:/opt/app/oracle/product/10.2/bin:, PWD=/opt/app/oracle/product/10.2/bin, QTDIR=/usr/lib/qt-3.3, SHELL=/bin/bash, SHLIB_PATH=/opt/app/oracle/product/10.2/lib32:/opt/app/oracle/product/10.2/lib:/opt/app/oracle/product/10.2/perl/lib, SHLVL=2, SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass, SSH_CLIENT=::ffff:10.3.22.61 4146 22, SSH_CONNECTION=::ffff:10.3.22.61 4146 ::ffff:10.3.149.210 22, SSH_TTY=/dev/pts/4, TERM=xterm, USER=oracle, XFILESEARCHPATH=/usr/dt/app-defaults/%L/Dt, _=/opt/app/oracle/product/10.2/jdk/jre/bin/java]
Feb 12, 2009 4:39:18 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Starting execution: /opt/app/oracle/product/10.2/perl/bin/perl /opt/app/oracle/product/10.2/sysman/admin/scripts/db/sgastop.pl stop ORCL3 svv-node2-pub.swlab.net 1521 /opt/app/oracle/product/10.2
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Exit value of 0
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Execution of /opt/app/oracle/product/10.2/perl/bin/perl /opt/app/oracle/product/10.2/sysman/admin/scripts/db/sgastop.pl stop ORCL3 svv-node2-pub.swlab.net 1521 /opt/app/oracle/product/10.2 completed successfully
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: nmccollector process does not exist
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.util.DBControlUtil stopNmccollector
CONFIG: Successfully stopped nmc-collector process
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: ORCL3, oracleHome: /opt/app/oracle/product/10.2, and user: SYS
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.EMReposConfig grantPrivsToDbsnmp
CONFIG: Exception while granting priviliges.
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-00942: table or view does not exist
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1467)
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeSql(SQLEngine.java:1708)
at oracle.sysman.emcp.EMReposConfig.grantPrivsToDbsnmp(EMReposConfig.java:538)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:217)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:133)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:142)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:485)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1141)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:469)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:418)
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.EMReposConfig invoke
CONFIG: Failed to grant priviliges to dbsnmp.
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter EMAIL_ADDRESS.
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MAIL_SERVER_NAME.
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MAIL_SERVER_SENDER_NAME.
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MAIL_SERVER_SENDER_ADDR.
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: ORCL3, oracleHome: /opt/app/oracle/product/10.2, and user: SYS
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.EMReposConfig unlockAccounts
CONFIG: Unlocking dbsnmp and sysman
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.EMReposConfig unlockAccounts
CONFIG: Unlocking mgmt view user account
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.EMReposConfig unlockAccounts
CONFIG: view user sql: declare repos_pwd varchar2(30); view_user varchar2(30); view_user_pwd varchar2(30); view_user_acc_status varchar2(30); begin repos_pwd := ?; sysman.mgmt_view_priv.get_view_user(view_user); select account_status into view_user_acc_status from sys.dba_users where upper(username) = upper ( view_user ); IF view_user_acc_status like '%LOCKED%' THEN execute immediate 'alter user ' || view_user || ' account unlock'; END IF; IF view_user_acc_status like '%EXPIRED%' THEN sysman.mgmt_view_priv.set_view_user_creds ( repos_pwd ); sysman.mgmt_view_priv.GET_VIEW_USER_CREDS ( view_user, view_user_pwd ); execute immediate 'alter user ' || view_user || ' identified by ' || view_user_pwd || ''; END IF; end;
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Starting execution: /opt/app/oracle/product/10.2/sysman/admin/scripts/emca/emcaDbUtil /opt/app/oracle/product/10.2/perl/lib:/opt/app/oracle/product/10.2/perl/lib/site_perl:/opt/app/oracle/product/10.2/sysman/admin/scripts:/opt/app/oracle/product/10.2/bin: /opt/app/oracle/product/10.2/perl/bin/perl /opt/app/oracle/product/10.2/sysman/admin/scripts/emca/emcaDbUtil.pl /opt/app/oracle/product/10.2 ORCL3 SYS SYSDBA declare repos_pwd varchar2(30); view_user varchar2(30); view_user_pwd varchar2(30); view_user_acc_status varchar2(30); begin repos_pwd := ?; sysman.mgmt_view_priv.get_view_user(view_user); select account_status into view_user_acc_status from sys.dba_users where upper(username) = upper ( view_user ); IF view_user_acc_status like '%LOCKED%' THEN execute immediate 'alter user ' || view_user || ' account unlock'; END IF; IF view_user_acc_status like '%EXPIRED%' THEN sysman.mgmt_view_priv.set_view_user_creds ( repos_pwd ); sysman.mgmt_view_priv.GET_VIEW_USER_CREDS ( view_user, view_user_pwd ); execute immediate 'alter user ' || view_user || ' identified by ' || view_user_pwd || ''; END IF; end; 1 SYSMAN_PWD
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Exit value of -1
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Arguments passed /opt/app/oracle/product/10.2 ORCL3 SYS SYSDBA declare repos_pwd varchar2(30); view_user varchar2(30); view_user_pwd varchar2(30); view_user_acc_status varchar2(30); begin repos_pwd := ?; sysman.mgmt_view_priv.get_view_user(view_user); select account_status into view_user_acc_status from sys.dba_users where upper(username) = upper ( view_user ); IF view_user_acc_status like '%LOCKED%' THEN execute immediate 'alter user ' || view_user || ' account unlock'; END IF; IF view_user_acc_status like '%EXPIRED%' THEN sysman.mgmt_view_priv.set_view_user_creds ( repos_pwd ); sysman.mgmt_view_priv.GET_VIEW_USER_CREDS ( view_user, view_user_pwd ); execute immediate 'alter user ' || view_user || ' identified by ' || view_user_pwd || ''; END IF; end; 1 SYSMAN_PWD
Connecting to database ORCL3 in home /opt/app/oracle/product/10.2 with user "SYS" role "SYSDBA".
connected to database.
sql to execute declare repos_pwd varchar2(30); view_user varchar2(30); view_user_pwd varchar2(30); view_user_acc_status varchar2(30); begin repos_pwd := ?; sysman.mgmt_view_priv.get_view_user(view_user); select account_status into view_user_acc_status from sys.dba_users where upper(username) = upper ( view_user ); IF view_user_acc_status like '%LOCKED%' THEN execute immediate 'alter user ' || view_user || ' account unlock'; END IF; IF view_user_acc_status like '%EXPIRED%' THEN sysman.mgmt_view_priv.set_view_user_creds ( repos_pwd ); sysman.mgmt_view_priv.GET_VIEW_USER_CREDS ( view_user, view_user_pwd ); execute immediate 'alter user ' || view_user || ' identified by ' || view_user_pwd || ''; END IF; end;
noOfParams to bind: 1.
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Couldn't execute statement: ORA-06550: line 1, column 144:
PLS-00201: identifier 'SYSMAN.MGMT_VIEW_PRIV' must be declared
ORA-06550: line 1, column 144:
PL/SQL: Statement ignored
ORA-06550: line 1, column 470:
PLS-00201: identifier 'SYSMAN.MGMT_VIEW_PRIV' must be declared
ORA-06550: line 1, column 470:
PL/SQL: Statement ignored
ORA-06550: line 1, column 527:
PLS-00201: identifier 'SYSMAN.MGMT_VIEW_PRIV' must be declared
ORA-06550: line 1, column 527:
PL/SQL: Statement ignored (DBD ERROR: error possibly near <*> indicator at char 143 in 'declare repos_pwd varchar2(30); view_user varchar2(30); view_user_pwd varchar2(30); view_user_acc_status varchar2(30); begin repos_pwd := :p1; <*>sysman.mgmt_view_priv.get_view_user(view_user); select account_status into view_user_acc_status from sys.dba_users where upper(username) = upper ( view_user ); IF view_user_acc_status like '%LOCKED%' THEN execute immediate 'alter user ' || view_user || ' account unlock'; END IF; IF view_user_acc_status like '%EXPIRED%' THEN sysman.mgmt_view_priv.set_view_user_creds ( repos_pwd ); sysman.mgmt_view_priv.GET_VIEW_USER_CREDS ( view_user, view_user_pwd ); execute immediate 'alter user ' || view_user || ' identified by ' || view_user_pwd || ''; END IF; end;') at /opt/app/oracle/product/10.2/sysman/admin/scripts/emca/emcaDbUtil.pl line 108, <STDIN> line 2.
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Error executing /opt/app/oracle/product/10.2/sysman/admin/scripts/emca/emcaDbUtil /opt/app/oracle/product/10.2/perl/lib:/opt/app/oracle/product/10.2/perl/lib/site_perl:/opt/app/oracle/product/10.2/sysman/admin/scripts:/opt/app/oracle/product/10.2/bin: /opt/app/oracle/product/10.2/perl/bin/perl /opt/app/oracle/product/10.2/sysman/admin/scripts/emca/emcaDbUtil.pl /opt/app/oracle/product/10.2 ORCL3 SYS SYSDBA declare repos_pwd varchar2(30); view_user varchar2(30); view_user_pwd varchar2(30); view_user_acc_status varchar2(30); begin repos_pwd := ?; sysman.mgmt_view_priv.get_view_user(view_user); select account_status into view_user_acc_status from sys.dba_users where upper(username) = upper ( view_user ); IF view_user_acc_status like '%LOCKED%' THEN execute immediate 'alter user ' || view_user || ' account unlock'; END IF; IF view_user_acc_status like '%EXPIRED%' THEN sysman.mgmt_view_priv.set_view_user_creds ( repos_pwd ); sysman.mgmt_view_priv.GET_VIEW_USER_CREDS ( view_user, view_user_pwd ); execute immediate 'alter user ' || view_user || ' identified by ' || view_user_pwd || ''; END IF; end; 1 SYSMAN_PWD
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.EMReposConfig unlockAccounts
CONFIG: Failed to unlock mgmt_view account
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.EMReposConfig invoke
SEVERE: Failed to unlock all EM-related accounts
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Failed to unlock all EM-related accounts
Refer to the log file at /opt/app/oracle/product/10.2/cfgtoollogs/emca/ORCL3/emca_2009-02-12_04-38-34-PM.log for more details.
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Failed to unlock all EM-related accounts
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:253)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:133)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:142)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:485)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1141)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:469)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:418)
Edited by: Ian123 on Feb 12, 2009 2:08 PM -
HELP! I have tried everything...I keep receiving the following error message:
"iTunes could not connect to the music store. Network connection was refused. Make sure your network settings are correct and network connection is active, then try again."
I have a 60GB video ipod. OS Windows XP Service Pack 1. Dial up AOL. No firewalls, checked connections, followed all instructions on the support page, contacted customer support via email (see responses below), contacted AOL (referred me back to iTunes), iTunes referred me to customer support number for iPod (which I called, and they referred be back to iTunes customer support via email). After emailing customer support and receiving a general response, and replying to each response, the email said they were not technical support...read all emails below beginning with the most recent:
Subj: Re: Connect; Follow-up:
Date: 1/19/2006 6:04:50 PM Pacific Standard Time
From: [email protected]
To:
Sent from the Internet (Details)
Dear Emily,
Thank you for contacting the iTunes Music Store. We're sorry to hear you are still unable to connect to the store. At the end of this email we have included further possible solutions to the issue you are encountering.
We're also sorry your iTunes Music Gift email didn't reach the recipient. The gift code you purchased is ... The recipient's ISP may have inadvertently blocked or filtered our email, thinking it was spam.
If you purchased your gift using iTunes, you can resend it with a few simple mouse clicks. Just follow these easy steps to resend an unredeemed music gift to any address:
http://www.info.apple.com/kbnum/n301476
If you would rather email the gift information directly to the recipient using your email program, we've included instructions for your recipient and the gift code below.
1. Download and install the latest version of iTunes. You can download the latest version, free-of-charge, from our website.
http://www.apple.com/itunes/download/
2. Click the link below to launch the iTunes application and view the gift page.
http://www.itunes.com/go/songcode/
3. Click Redeem.
4. Copy this gift code and paste it into the Redeem code entry box.
Again, we're sorry you are still unable to connect to the store.
First, please make sure you're using the latest version of iTunes before you access the iTunes Music Store. You can download the latest version of iTunes from our website.
http://www.apple.com/itunes/download/
Also, some software that you install on your computer can affect the way your computer sends and receives information from the Internet. A few examples of this software are:
* Firewalls
* Internet security software
* Privacy filters
* Web accelerators
* Ad filters
If you cannot use the iTunes Music Store, try disabling this software temporarily to identify the culprit. Then, please refer to the documentation that came with the software to allow the iTunes Music Store to connect to the Internet. For your reference, these domains need to be permitted to send and receive data from the Internet:
phobos.apple.com
phobos.apple.com.edgesuite.net
For more instructions on configuring your 3rd-party software, please contact the software manufacturer. If your web accelerator appears to be at the root of the problem, please contact your ISP.
Sincerely,
The iTunes Music Store Team
http://www.apple.com/support/itunes/ww/
Thank you for your response. I am curious to know why if iTunes does not
answer non technical questions, why I received information when I replied to this
email. Listed below are the previous threads providing technical information.
Furthermore, if this is email is for billing disputes, I would like to have
my Mastercard credited $25.87 for a "gift this purchase/tv show" that I
purchased for my uncle on Christmas Day. I purchased the full first season of Monk.
I previously sent an email requesting credit on approximately January 2,
2006, and failed to receive a response. He never received the gift, or any
instructions about how to download the tv show, and I do not show a credit
appearing on my credit card. I would like to have credit for services not received.
Please credit the following card #XXXX
Thank you.
Emily
Subj: Re: Connect; Follow-up:
Date: 1/18/2006 2:21:12 PM Pacific Standard Time
From: [email protected]
To:
Sent from the Internet (Details)
Dear Emily,
Thank you for contacting the iTunes Music Store.
The iTunes Music Store team answers non-technical questions about billing,
customer accounts, downloading music, and iTunes Music Store content.
Many questions about your iTunes software can be answered by choosing “iTunes
and Music Store Help” from the Help menu.
For online information, visit iTunes Support at
<http://www.apple.com/support/itunes>.
To access the discussion boards for iTunes and other Apple services, please
visit
<http://discussions.info.apple.com>.
For support for your iPod, please visit:
<http://www.apple.com/support/ipod/>
If you require assistance beyond the complimentary support available online,
please call AppleCare technical support at 800-APL-CARE (800-275-2273). Help
is available seven days a week from 8:00 a.m. to 8:00 p.m. central time. There
may be a fee associated with the call.
Sincerely,
iTunes Music Store Support
Need a quick answer?
iTunes Music Store Customer Service:
<http://www.apple.com/support/musicstore/ww>
iTunes technical assistance:
<http://www.apple.com/support/itunes/ww>
Thank you for your response. I have tried these methods, AGAIN. None of
them seem to work. I also contact my ISP, AOL. Nothing they advised me to do
worked. Has iTunes performed recent upgrades? Just viewing the discussion
boards, it seems like a lot of people are having problems. Having paid $399
for
the 60GB video ipod, I need more than a generic email telling me what to do,
when I already indicated in previous email that I followed the steps shown in
the
support area, which were the same instructions email to me.
Subj: Re: Connect; Follow-up:
Date: 1/16/2006 5:14:47 PM Pacific Standard Time
From: [email protected]
Sent from the Internet (Details)
Dear Emily,
Thank you for contacting the iTunes Music Store. Use the steps in the
following article to troubleshoot your connection problem.
I have been unable to connect for more than 24 hours on Windows.
If you haven't been able to connect to the iTunes Music Store for more than a
day—and other customers on our discussion boards aren't experiencing similar
issues—a software or ISP configuration issue may be blocking your access to
the iTunes Music Store.
• Your copy of the iTunes application may be out of date.
• If iTunes is out of date, it will not be able to connect to the
iTunes Music Store. You can download the latest version of iTunes from our
website: ?http://www.apple.com/itunes/download/
• You installed a third-party anti-virus or personal firewall
application.
• You will need to configure your software to allow iTunes to access
the Music Store. You can contact the software manufacturer if you have
questions regarding configuration. Click here for more information.
• You upgraded to Windows XP Service Pack 2.
• Windows XP Service Pack 2, by default, enables the Windows Firewall.
As with a third-party firewall, you will need to configure Windows Firewall
to allow iTunes to access the Music Store. Read this document for more
information. If you have further questions about configuring the Windows Firewall,
contact Microsoft's Service Pack 2 hotline at (888) SP2-HELP.
• You upgraded to a high-speed or wireless Internet connection.
• A new DSL or cable modem, or even a router, could be the culprit.
These devices allow your computer to access the Internet at a much higher speed,
or route your connection to multiple computers. However, they can also expose
your computer to hackers. To help prevent this, manufacturers of these
products often install firewalls to prevent hackers and viruses from compromising
your system. Although this layer of protection is beneficial, there are
occasions when a device may determine that the iTunes Music Store is a threat to the
computer. If this is the case, you will need to configure these devices to
allow iTunes to access the Music Store. Contact your ISP or the device
manufacturer if you need help configuring your device.
• You switched to a new ISP.
• If you didn't install new networking hardware, your ISP may be
blocking access to the iTunes Music Store. Let your ISP know about this document
which can help your them configure their servers to allow iTunes Music Store
traffic through.
Sincerely,
The iTunes Music Store team
http://www.apple.com/support/itunes/ww/
In a message dated 1/14/2006 8:20:29 AM Pacific Standard Time,
[email protected] writes:
http://www.info.apple.com/kbnum/n300870
Thank you for your quick response. I already tried the link and all
instructions several times.
-The following is my information:
Sacramento, CA
-AOL 8.0 (dial up connection) - (tried downloading 9.0 but always receive
error message)
-The error message received is: iTunes cound not connect to the Music Store.
Network connection was refused. Make sure your network settings are correct
and network connection is active, then try again
Thank you,
Emily
Subj: Re: Connect; Follow-up:
Date: 1/14/2006 8:20:29 AM Pacific Standard Time
From: [email protected]
Sent from the Internet (Details)
Dear Emily,
We're sorry to hear that you can't connect to the iTunes Music Store. Your
experience using the iTunes Music Store is very important to us, and we'll do
everything we can to help you fix the connection issue quickly.
This article outlines the culprits that can cause a connection issue. Please
try these solutions:
http://www.info.apple.com/kbnum/n300870
We hope one of these solutions helped you resolve the connection issue. In
the rare event that these suggestions didn't help, please reply to this email
with the following information:
1. Your city and state.
2. Whether you use a high-speed Internet connection, like a cable modem or
DSL.
3. The name of your Internet Service Provider.
4. The error message iTunes displayed (if any) when you tried to connect.
5. Your approval to reset your password.
Sincerely,
The iTunes Music Store Team
http://www.apple.com/support/itunes/ww/
Customer First Name : Emily
Customer Last Name :
email :
Web Order # :
Support Subject : Connect
Sub Issue : Can't connect
Comments : iTunes Account Name:
Platform : Windows XPSP1
Error Code :
Other Error :
Comments:
The error message I am receiving is "iTunes cound not connect to the Music
Store. Network connection was refused. Make sure your network settings are
correct and network connection is active, then try again". I have been unable to
connect to the music store for at least 3-4 days. I have been using iTunes
since last October, successfully. I checked all my network connections & they
are fine. I am able to connect to AOL. I even uninstalled and reinstalled
iTunes several times, all successfully, but I am still encountering a problem.
Thank you.
Emily
Nice, effective customer service. I'm at my wit's end. I field customer service calls, and answer emails at work, and the general responses from the iTunes response library are ridiculous. Especially, after emailing me twice technical support emails, they tell me they do not handle technical support questions...
Any help or suggestions as to how I should respond to the next email is helpful...
I also forgot to mention I have been able to connect to iTunes since October 2005, and have been unable to connect for almost 2 weeks now. And, yes, I have downloaded the latest version of iTunes. I was advised over the phone to upgrade to XP Service Pack 2, but it looks like SP2 has issues. ANd, no, I did not download SP2, because the customer support rep admitted he knew nothing to very little about iTunes.
EmilyEmily,
thanks for your posting, it just reflects my experience (although I didn't contact the helpdesk, but after what you wrote I think I can skip that part). I am livin in China and buy from the German MS, worked fine until about a week ago when the download of an album stopped just after 5 songs. I have never been able to connect to the shop ever since.
The interesting thing is, that I get a response from their server in the domain phobos.apple.com (phobos.apple.com/WebObjects/MZStore.woa/wa/storeFront) which I would interpret that there can't be a problem which they always list (Antivirus, Firewall etc...)
So will there ever be somebody from Apple who is going to give a better explanation how to solve the problem ? Or are there already too many people buying iPods and music ??? -
ITunes Gift Card and now "iTunes could not connect to the iTunes Store."
My wife was using my computer yesterday and was entering in a gift card number that I gave her. Well, the card had a number missing or something and she tried all types of combinations. After some time she showed me an error (-50 if I recall) and since then I get "iTunes could not connect to the iTunes Store. Make sure your network connection is active and try again."
It had been working for weeks. So now, I tried a few other applications to get some more information and I found this:
Failed 'authorizeMachine':null
So, can someone tell me what to do, or remove my MAC address from Apple's iTunes store anti-scripting program
Please email me with a resolution.
NicolasMe too. I upgraded to 7.02 iTunes. It hasn't happened before till the new upgrade. I'm using Windows 2000. I even renamed My Music, iTunes and iPod to "Old" and reinstalled the disc that came with my iPod Nano. It still will not connect. Make sure your Firewall is not being used while trying to connect. Or your ISP is probably prohibiting use to iTunes Music Store. Maybe a Anti-Virus Software program.
If Apple is trying to fix their bugs due to the new upgrade the are giving, they need to give free music for the inconvenience of their customers not being able to connect. My internet connection is active. My husband is a network guru and even he is surprised it doesn't work. Maybe my Hughes.net ISP is prohibiting use. We are trying everything.
Good Luck to everyone. If you find a solution that works, please email me. Thank you. -
EAS server error: Could not connect to administration Server
Hi,
I have installed Hyperion suite in Windows server 2008 R2. It was working fine but now when i tried to login in to the EAS console, I am getting the following error:
"Server Error: Could not connect to administration server".
I tried accessing the same through the web URL and I found "404 error - file or directory not found".
I verified all my services are up and running fine. I am able to connect to the essbase sever through Excel as well as planning.
The log retireved from the HyS9eas-sysout.log file is below:
<Sep 11, 2013 7:06:56 AM JST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Sep 11, 2013 7:06:57 AM JST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Sep 11, 2013 7:06:58 AM JST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.0.2-11-135406-1.6.0_20-20100624-2119-windows-x86_64 from Oracle Corporation>
<Sep 11, 2013 7:07:04 AM JST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.4.0 Fri Dec 17 20:47:33 PST 2010 1384255 >
<Sep 11, 2013 7:07:15 AM JST> <Emergency> <Management> <BEA-141151> <The admin server could not be reached at http://localhost:7001.>
<Sep 11, 2013 7:07:15 AM JST> <Info> <Configuration Management> <BEA-150018> <This server is being started in managed server independence mode in the absence of the admin server.>
<Sep 11, 2013 7:07:15 AM JST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Sep 11, 2013 7:07:15 AM JST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Sep 11, 2013 7:07:16 AM JST> <Notice> <LoggingService> <BEA-320400> <The log file E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\logs\EssbaseAdminServices0.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Sep 11, 2013 7:07:16 AM JST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\logs\EssbaseAdminServices0.log00410. Log messages will continue to be logged in E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\logs\EssbaseAdminServices0.log.>
<Sep 11, 2013 7:07:16 AM JST> <Notice> <Log Management> <BEA-170019> <The server log file E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\logs\EssbaseAdminServices0.log is opened. All server side log events will be written to this file.>
<Sep 11, 2013 7:07:48 AM JST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Sep 11, 2013 7:07:56 AM JST> <Warning> <JTA> <BEA-110503> <The migrator(the AdminServer for manual JTA migration policy, or the Singleton Master for automatic JTA migration policy) is not available. Will skip JTA TRS failback because isStrictOwnershipCheck is [false]. This may lead to potencial TLOG corruption if TRS of EssbaseAdminServices0 has been migrated to backup server and the backup server is accessing the TLOG of EssbaseAdminServices0. More safety can be achieved by setting isStrictOwnershipCheck to [true].>
<Sep 11, 2013 7:08:35 AM JST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Sep 11, 2013 7:08:35 AM JST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
Calling getDomainConfiguration()
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
Calling getRuntimeService()
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
return com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
return com.bea:Name=EPMSystem,Type=Domain
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
Domain location is 'E:\Oracle\Middleware\user_projects\domains\EPMSystem'
Calling getRuntimeService()
return com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
Checking E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\registry_update.xml file
EPM_ORACLE_HOME: E:\Oracle\Middleware\EPMSystem11R1
Template for EAS#11.1.2.0: E:\Oracle\Middleware\EPMSystem11R1\common\templates\applications\epm_eas_11.1.2.1.jar
Dependencies for E:\Oracle\Middleware\EPMSystem11R1\common\templates\applications\epm_eas_11.1.2.1.jar: [Oracle EPM Common, Oracle EPM Calcmgr, Oracle EPM Planning libraries, Oracle EPM EAS libraries, Oracle EPM Misc libraries, Oracle EPM Xerces libraries]
BPMUI shared webapp not referenced from EAS#11.1.2.0
Application name: EAS#11.1.2.0
Application source: eas.ear
Server name: EssbaseAdminServices0
Server port: 10080
Server SSL port: 10083
Application context: eas
Registry product type: ESSBASE_PRODUCT
Registry physical web application type: ADMIN_SERVICES_WEB_APP
weblogic.Name property is 'EssbaseAdminServices0', seems to be WebLogic mode
registry.isRegistryDatabaseCreated()true
Registry was initialized sucessfully
Executing pre custom update for EAS#11.1.2.0
EPM_ORACLE_INSTANCE: E:\Oracle\Middleware\user_projects\epmsystem1
<Sep 11, 2013 7:09:06 AM JST> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'EAS [Version=11.1.2.0]' due to error java.lang.NullPointerException.
java.lang.NullPointerException
at java.io.File.<init>(File.java:222)
at com.hyperion.hit.tool.deploy.update.util.RegistryHelper.createPhysicalWebApp(RegistryHelper.java:168)
at com.hyperion.hit.tool.deploy.update.RegistryUpdater.update(RegistryUpdater.java:36)
at com.hyperion.hit.tool.deploy.update.RegistryUpdateListener.preStart(RegistryUpdateListener.java:91)
at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.run(BaseLifecycleFlow.java:282)
Truncated. see log file for complete stacktrace
Caused By: java.lang.NullPointerException
at java.io.File.<init>(File.java:222)
at com.hyperion.hit.tool.deploy.update.util.RegistryHelper.createPhysicalWebApp(RegistryHelper.java:168)
at com.hyperion.hit.tool.deploy.update.RegistryUpdater.update(RegistryUpdater.java:36)
at com.hyperion.hit.tool.deploy.update.RegistryUpdateListener.preStart(RegistryUpdateListener.java:91)
at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.run(BaseLifecycleFlow.java:282)
Truncated. see log file for complete stacktrace
>
<Sep 11, 2013 7:09:06 AM JST> <Emergency> <Deployer> <BEA-149259> <Server 'EssbaseAdminServices0' in cluster 'EssbaseAdminServices' is being brought up in administration state due to failed deployments.>
<Sep 11, 2013 7:09:17 AM JST> <Notice> <Cluster> <BEA-000197> <Listening for announcements from cluster using unicast cluster messaging>
<Sep 11, 2013 7:09:17 AM JST> <Notice> <Cluster> <BEA-000133> <Waiting to synchronize with other running members of EssbaseAdminServices.>
<Sep 11, 2013 7:09:22 AM JST> <Warning> <Log Management> <BEA-170011> <The LogBroadcaster on this server failed to broadcast log messages to the admin server. The Admin server may not be running. Message broadcasts to the admin server will be disabled.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias DemoIdentity from the jks keystore file E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoIdentity.jks.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoTrust.jks.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file E:\Oracle\Middleware\jrockit_160_20\jre\lib\security\cacerts.>
<Sep 11, 2013 7:09:48 AM JST> <Alert> <Security> <BEA-090152> <Demo trusted CA certificate is being used in production mode: [
Version: V3
Subject: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: Sun RSA public key, 512 bits
modulus: 9550192877869244258838480703390456015046425375252278279190673063544122510925482179963329236052146047356415957587628011282484772458983977898996276815440753
public exponent: 65537
Validity: [From: Fri Mar 22 05:12:27 JST 2002,
To: Wed Mar 23 05:12:27 JST 2022]
Issuer: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
SerialNumber: [ 33f10648 fcde0deb 4199921f d64537f4]
Certificate Extensions: 1
[1]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
Key_CertSign
Algorithm: [MD5withRSA]
Signature:
0000: 9D 26 4C 29 C8 91 C3 A7 06 C3 24 6F AE B4 F8 82 .&L)......$o....
0010: 80 4D AA CB 7C 79 46 84 81 C4 66 95 F4 1E D8 C4 .M...yF...f.....
0020: E9 B7 D9 7C E2 23 33 A4 B7 21 E0 AA 54 2B 4A FF .....#3..!..T+J.
0030: CB 21 20 88 81 21 DB AC 90 54 D8 7D 79 63 23 3C .! ..!...T..yc#<
] The system is vulnerable to security attacks, since it trusts certificates signed by the demo trusted CA.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[6]" is now listening on 127.0.0.1:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[6]" is now listening on 127.0.0.1:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[7]" is now listening on 0:0:0:0:0:0:0:1:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[7]" is now listening on 0:0:0:0:0:0:0:1:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on fe80:0:0:0:0:5efe:a0e:daee:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 10.14.126.11:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[5]" is now listening on fe80:0:0:0:0:5efe:a0e:224b:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[3]" is now listening on fe80:0:0:0:0:5efe:a0e:daee:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[1]" is now listening on 10.14.126.11:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[5]" is now listening on fe80:0:0:0:0:5efe:a0e:224b:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on 10.14.34.75:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[4]" is now listening on fe80:0:0:0:0:5efe:a0e:7e0b:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 10.14.218.238:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.14.218.238:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[2]" is now listening on 10.14.34.75:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[4]" is now listening on fe80:0:0:0:0:5efe:a0e:7e0b:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <WebLogicServer> <BEA-000358> <Started WebLogic Independent Managed Server "EssbaseAdminServices0" for domain "EPMSystem" running in Production Mode>
<Sep 11, 2013 7:09:48 AM JST> <Warning> <JMX> <BEA-149510> <Unable to establish JMX Connectivity with the Adminstration Server AdminServer at <JMXServiceURL:null>.>
<Sep 11, 2013 7:09:48 AM JST> <Warning> <Server> <BEA-002611> <Hostname "SJ015040", maps to multiple IP addresses: 10.14.126.11, 10.14.34.75, 10.14.218.238, 0:0:0:0:0:0:0:1>
<Sep 11, 2013 7:09:53 AM JST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Sep 11, 2013 7:09:53 AM JST> <Notice> <WebLogicServer> <BEA-000360> <Server started in ADMIN mode>
HyS9eas-syserr.log is empty and I dont find anyother details from the other log files.
Kindly help me out in solving this issue.
Thanks in advance.
Regards,
Balaji PHi John,
Sorry for replying late.
I ran the EPM diagnostic and found EAS & APS application are failed. So as you mentioned, i tried re-deployment through EPM configurator.
But Re-configuration fails with error "An unexpected error occurred and the application will have to shut down" .
When i looked in to the Config tool.log,I got the following messages.
[2013-09-17T18:17:04.635+09:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 17] [ecid: 0000K4fDMY^0zkgpxC^AyW1IE1pJ000003,0:325] [SRC_CLASS: com.hyperion.hit.tool.deploy.utils.UIPortUtil] trace: Parsing server FinancialReporting0 on port 8200 from registry
[2013-09-17T18:17:04.827+09:00] [EPMINS] [ERROR] [EPMINS-00001] [oracle.EPMINS] [tid: 17] [ecid: 0000K4fDMY^0zkgpxC^AyW1IE1pJ000003,0:325] [SRC_CLASS: com.hyperion.hit.wizard.Wizard] trace: Unexpected error:[[
java.lang.NullPointerException
at com.hyperion.hit.tool.deploy.utils.UIPortUtil.<init>(UIPortUtil.java:83)
at com.hyperion.hit.tool.deploy.utils.UIPortUtil.getInstance(UIPortUtil.java:53)
at com.hyperion.config.wizard.DeploymentField.getAppServerDeploymentData(DeploymentField.java:235)
at com.hyperion.config.wizard.DeploymentField.<init>(DeploymentField.java:56)
at com.hyperion.config.wizard.impl.DeploymentForm.<init>(DeploymentForm.java:57)
at com.hyperion.config.wizard.impl.DeploymentState.initializeBeforeShowOnNext(DeploymentState.java:56)
at com.hyperion.hit.wizard.Wizard$NextClass.run(Wizard.java:522)
at java.lang.Thread.run(Thread.java:619)
Since it is similare to the Oracle konwledge base article - (Doc ID 1570293.1), I tried adding the shared service domain to the Windows host file. But i am still recieveing the same error message as above.
Appreciates your help.
Thanks & Regards,
Balaji P
Maybe you are looking for
-
Output Message from Purchasing Value Key
Hi All, Can anyone tell me how to configure the message and the output parameters for the time defined with the Purchasing Value Keys? What are the steps needed to create the message and to add an output? Any help would be greatly appreciated and ofc
-
How to make the PR00 condition type madatory
Hi Guys, We need to prevent any sales order without PR00 from being posting. Where should we set this customization? Best Regards Jerome
-
My form is creating a page 1 in the PDF mode leaving the 1st page blank except for the header. The web view is fine...the page view while online is fine. When I download the PDF to my computer the 1st page has a blank text glitch . What can be done
-
How to make a cell that recognized the second from last?
Two tables. First is data and second refers to the second to last column of the first which is always changing. The first table is a weekly table so it is constantly expanding. On that first table has a number that changes with it. I want the second
-
I am running Windows 7, 64 bit, LR4 (latest version). Currently, I have 3 folders of images in LR. When I open either of the first two (all RAW i)mages, everything goes well. That is, I have been able to manipulate the images. With the third fold