Could not connect to remote service [rmi://localhost:1099/

I have a large deployment with two filr appliances and one database and one search index.
I am running zen load balancer in front of the appliance which works great.
There are no config changes to the filr appliances in terms of port redirection.
I had an issue upgrading from 1.0.1 to 1.1 so I blew it away and started fresh.
After I installed and configured the appliances there were no issues . Now the :9443 configuration section will not work I get
(this is just the top lines)
HTTP ERROR 500
Problem accessing /. Reason:
Could not connect to remote service [rmi://localhost:1099/GangliaService]; nested exception is java.rmi.NoSuchObjectException: no such object in table
Caused by:
org.springframework.remoting.RemoteConnectFailureE xception: Could not connect to remote service [rmi://localhost:1099/GangliaService]; nested exception is java.rmi.NoSuchObjectException: no such object in table
at org.springframework.remoting.rmi.RmiClientIntercep torUtils.convertRmiAccessException(RmiClientInterc eptorUtils.java:190)
at org.springframework.remoting.rmi.RmiClientIntercep tor.doInvoke(RmiClientInterceptor.java:347)
This is on all appliances (search,data,filr1,filr2)
I restarted filr2 and the admin section 9443 comes back for a short time. Maybe 10 minutes then I get the same error. But now after the restart I get and authentication box asking for credentials on 8443. when I put in the admin or other creds it directs me to a page that says
HTTP Status 500 - Filter execution threw an exception
type Exception report
message Filter execution threw an exception
description The server encountered an internal error that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: Filter execution threw an exception
org.kablink.teaming.webdav.servlet.filter.Resource DispatchFilter.doFilter(ResourceDispatchFilter.jav a:87)
root cause
java.lang.ExceptionInInitializerError
java.lang.J9VMInternals.initialize(J9VMInternals.j ava:259)
org.kablink.teaming.asmodule.spring.security.userd etails.DecryptedPasswordUserDetailsService.loadUse rByUsername(DecryptedPasswordUserDetailsService.ja va:51)
org.springframework.security.web.authentication.http://www.DigestAuthenticationFilte...lter.java:144)
org.springframework.security.web.FilterChainProxy$ VirtualFilterChain.doFilter(FilterChainProxy.java: 323)
org.springframework.security.web.context.SecurityC ontextPersistenceFilter.doFilter(SecurityContextPe rsistenceFilter.java:87)
org.springframework.security.web.FilterChainProxy$ VirtualFilterChain.doFilter(FilterChainProxy.java: 323)
org.springframework.security.web.FilterChainProxy. doFilter(FilterChainProxy.java:173)
org.springframework.web.filter.DelegatingFilterPro xy.invokeDelegate(DelegatingFilterProxy.java:346)
org.springframework.web.filter.DelegatingFilterPro xy.doFilter(DelegatingFilterProxy.java:259)
org.kablink.teaming.webdav.servlet.filter.Resource DispatchFilter.doFilter(ResourceDispatchFilter.jav a:87)
I have rebooted to no avail. If I restart the jetty service I do get the appliance login for 9443 but if I try to login I get the same message about [rmi://localhost:1099/
again if I reboot then 9443 works for 10 mins but 8443 gets hosed. Everything worked fine until I rebooted the appliance.
I am afraid to even reboot these appliances now in fear that the will cease to work.
I should also note that this was part of the upgrade issue I had after I rebooted all of the appliances.
Thanks in advance.

Originally Posted by bschilliger
The same issue here:
HTTP Status 500 - Filter execution threw an exception
type Exception report
message Filter execution threw an exception
description The server encountered an internal error that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: Filter execution threw an exception
org.kablink.teaming.webdav.servlet.filter.Resource DispatchFilter.doFilter(ResourceDispatchFilter.jav a:87)
The password in the FILR appliance configuration 'Outbound E-Mail' was too complex (with special characaters). After changing the special characters with letters and/or numbers, the server starts without any troubles!
Regards from Switzerland,
Beat

Similar Messages

  • Could not connect to remote service - java.lang.NullPointerException

    Hi,
    I'm struggling to get RMI to work on two servers. Locally my client and server work fine together although when I deploy I get a null pointer exception the first time I try and invoke a remote method. I've tried stopping the server app to see if it is actually connecting at I get a connection refused exception when its stopped so I'm assuming it must be connecting.
    Could not connect to remote service  - java.lang.NullPointerException
    com.jws.remoteServices.RemoteUpdateServer.addNewReport(RemoteUpdateServer.java:61)
    sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
    sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
    java.lang.reflect.Method.invoke(Method.java:616)
    sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:322)
    sun.rmi.transport.Transport$1.run(Transport.java:177)
    java.security.AccessController.doPrivileged(Native Method)
    sun.rmi.transport.Transport.serviceCall(Transport.java:173)
    sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:553)
    sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run0(TCPTransport.java:808)
    sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:667)
    java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1110)
    java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:603)
    java.lang.Thread.run(Thread.java:636)
    sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(StreamRemoteCall.java:273)
    sun.rmi.transport.StreamRemoteCall.executeCall(StreamRemoteCall.java:251)
    sun.rmi.server.UnicastRef.invoke(UnicastRef.java:160)
    java.rmi.server.RemoteObjectInvocationHandler.invokeRemoteMethod(RemoteObjectInvocationHandler.java:195)
    java.rmi.server.RemoteObjectInvocationHandler.invoke(RemoteObjectInvocationHandler.java:149)
    $Proxy0.addNewReport(Unknown Source)
    jasperserver.ReportHandler.run(ReportHandler.java:81)Any help would be greatly appreciated,
    Regards,
    Dan
    Edited by: danblackhust on Jul 18, 2010 3:54 AM

    Show us the code that threw and caught this exception.

  • Premiere Elements 8 "Could not connect to remote server" when sharing to YouTube

    I'm trying to share my Adobe Premiere Elements 8 video to YouTube through the task panel, but I get a "Could not connect to remote server" message. My computer is connected to the Internet. I notice at the bottom of the message there is "Open the Opera Help" and "Go to Opera's on-line support desk." I don't have Opera on this computer, so maybe that's it?

    No. You don't need Opera.
    Have you gone to Edit/Preferences and ensured that your Web Services are up to date?
    Otherwise, it could be that YouTube changed settings on us again. If that's the case, you'll need to post to it manually, per the FAQs to the right of this forum.
    http://forums.adobe.com/thread/390608?tstart=30

  • Could not connect to DbaaS Service using the given user name and password.

    I'm not able to create Java Cloud Service (Oracle Java Cloud - Virtual Image Services) for my newly created Oracle Database Cloud Service instance. It fails with
    "Incorrect values entered
    Could not connect to DbaaS Service using the given user name and password.
    Verify that the user name and password are correct and the user name has SYSDBA privileges."
    I'm using SYSTEM user and the password I used during Oracle Database Cloud Service instance creation. I've verified them with sqlplus and also by connecting remotely.
    Java Cloud Service wizard doesn't allow me to proceed to instance creation.

    Hi Alexander,
    Maybe you'll find useful the document from Oracle docs specified bellow regarding Creating an Oracle Java Cloud Instance:
    http://docs.oracle.com/cloud/latest/jcs_gs/JSCUG/GUID-31F00F2C-221F-4069-8E8A-EE48BFEC53A2.htm#JSCUG3128
    Thanks,
    Cristiana.
    #OracleCloud

  • SFTP receiver error: putFile: Could not connect to remote host; Reason: Unable to open Sftp client. SshReasonCode: CHANNEL_FAILURE

    Hi,
    When we try to send file over seeburger SFTP (receiver) we are getting the error as below.
    Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: >> Description: SFTP transaction error occured.>> Details: putFile: Could not connect to remote host; Reason: Unable to open Sftp client. SshReasonCode: CHANNEL_FAILURE>>SendingStatus: NOT_TRANSMITTED>>FaultCategory: COMMUNICATION_ERROR>>Retryable: true>>Fatal: true, >> Description: SFTP transaction error occured.>> Details: putFile: Could not connect to remote host; Reason: Unable to open Sftp client. SshReasonCode: CHANNEL_FAILURE>>SendingStatus: NOT_TRANSMITTED>>FaultCategory: COMMUNICATION_ERROR>>Retryable: true>>Fatal: true
    But we are able to connect through filezilla . we are able to create and delete file using the same username and password which is being used in SFTP adapter.
    we have imported the both dsa and rsa keys in SFTP partner folder in NWA. Even though we are getting same error.
    Thanks,
    Vinayak

    Hi Ram,
    we checked with network team and port 22 is open and they are able to ping to the target system.
    we checked the seeburger logs and we see EOF received from remote site error:
    Caused by: com.maverick.ssh.SshException: EOF received from remote side [Unknown cause]
    #at com.maverick.ssh2.TransportProtocol.b(Unknown Source)
    #at com.maverick.ssh2.TransportProtocol.i(Unknown Source)
    #at com.maverick.ssh2.TransportProtocol.nextMessage(Unknown Source)
    #at com.maverick.ssh.message.SshMessageRouter.d(Unknown Source)
    #at com.maverick.ssh.message.SshMessageRouter.access$000(Unknown Source)
    #at com.maverick.ssh.message.SshMessageRouter$_b.run(Unknown Source) 
    Thanks,
    Vinayak.

  • ERROR: Could not connect to WhatsApp service. Please try again later.

    Hi,
    Today there was a connection error with WhatsApp. I needed to send something, so decided to delete and then reinstall the app to try and attempt to fix the connection problem. I am using the iPhone 5C.
    Once I redownloaded the app, I opened it and the app asked me for my phone number. I typed it in.
    But to my surprise, I got this error:
    Could not connect to WhatsApp service. Please try again later.
    After several attempts of writing my phone number (100% in the correct format) I had found no luck or success.
    Anyone else having this error, or is it just me? Please provide some steps on how to fix this if so!
    Thank you

    Thank you for the heads up. It seems like it's working now.
    For everyone with this problem please thank AlbertoRuperto and follow these steps:
    1. Restart your iPhone.
    2. Open WhatsApp.
    3. Enter your phone number.
    4. Enter verification code (if you're a new member) or just click 'Next' if you're a returning user.
    5. Done! All your contacts should be there and your chats (as long as you backed them up).
    P.S. This only applies to people who redownloaded and are stuck on phone verification page.

  • Updates: "Could not connect to the service"

    Hi,
    Every time I click on the software update button in Ovi Suite it seems to be checking for updates, but after a while I get the message
    Could not connect to the service
    There seems to be a problem with connecting to the Nokia Ovi Suite update service. Make sure that your firewall and virus protection settings are correct. Also, make sure that the menu option for working offline is not selected in Internet Explorer. If you still cannot connect, the service may be unavailable. Please try again later.
    I got a similar message with an earlier version of Ovi Suite, so I uninstalled it and installed version 3.0.0.290 manually, but I am still getting this message.
    Thanks

    There has been a problem with Ovi suite where it has used some old GTE CyberTrust certificates from the pc and those old certificates have expired. If you run a trace on a failed Ovi login using wireshark then you might see something like this:
    10.1.1.3              184.27.103.249        SSLv3    Client Hello
    184.27.103.249        10.1.1.3              TCP      https > 4251 [ACK] Seq=1 Ack=89 Win=5840 Len=0
    184.27.103.249        10.1.1.3              SSLv3    Server Hello,
    184.27.103.249        10.1.1.3              SSLv3    Certificate, Server Hello Done
    10.1.1.3              184.27.103.249        TCP      4251 > https [ACK] Seq=89 Ack=1798 Win=64512 Len=0
    10.1.1.3              184.27.103.249        SSLv3    Client Key Exchange, Change Cipher Spec, Encrypted Handshake Message
    184.27.103.249        10.1.1.3              SSLv3    Change Cipher Spec, Encrypted Handshake Message
    10.1.1.3              184.27.103.249        TCP      4251 > https [FIN, ACK] Seq=301 Ack=1873 Win=64437 Len=0
    184.27.103.249        10.1.1.3              SSLv3    Encrypted Alert
    10.1.1.3              184.27.103.249        TCP      4251 > https [RST, ACK] Seq=302 Ack=1910 Win=0 Len=0
    10.1.1.3 ========> Windows XP pc behind router with NAT running Nokia Ovi Suite 3.0.0.290.
    184.27.101.249 ==> server in akamaitechnologies.com domain.
    The SSLv3 Encrypted Alert message in the trace might be related to those expired certificates. The workaround is to manually remove those certificates, but I don't think that has worked for everyone.
    It appears that there might have been some improvements in Ovi Suite 3.1.0.84, which is why satari is recommending to upgrade to Ovi Suite 3.1.0.84. If this works for people here, it would be really useful if those people could confirm, so other people can know if that fixed the problem.

  • Could not install DPM agent on Secondry site DPM could not connect to the Service control manager : ID 33221

    Hi,
    We have two DPM 2012 R2 server installed at Primary and Secondary site Windows 2012 R2 installed.
    We need to Protected Primary DPM from Secondary DPM.
    When install DPM agent got error from secondary DPM console.
    “DPM could not connect to the Service Control Manager on these servers ID: 33221”
    Checked till now :
    Visual C++ redistributable installed.
    Checked DNS A record and both server can ping each other,
    Widows Firewall off on both servers.
    Net stop mpssvc ( Windows firewall service)
    sc \\Server1 query
     àable
    to see result
    Thanks,

    Hi
    You mention checking the DNS A record, are these 2 servers not in the same domain? Can you ping -a computername?
    Do you have any other AV software that have firewalls built in?
    Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Windows could not start the remote services on local computer

    windows could not start the remote services on local computer 
    1075: the dependency service does not exist or has been marked for deletion

    Hi,
    On which system you are facing this issue?
    Can you ping to the remote system\server successfully?
    Initially it seems that this occur due to services issue on system. Might possible that the remote Services component is not installed or is disabled. For that you can add the remote Services component by using the Add/Remove Programs tool in Control Panel
    before attempting to start the service. If the service is already installed then check whether it is started properly. Additional check the relayed service for Remote and verify.
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Could not connect to the service...

    Hi guys.. I want to update my Nokia 5800 firmware, but it keep showed "could not connect to the server" many times. what should i do?? i need to update my phone.. please healp me.. Thanx.
    Attachments:
    can't connect.JPG ‏41 KB

    Hi
    You mention checking the DNS A record, are these 2 servers not in the same domain? Can you ping -a computername?
    Do you have any other AV software that have firewalls built in?
    Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Could not connect to a DATABASE with localhost as Hostname from SQL develop

    I am not able to connect to any Database from SQL Developer by providing "localhost" as Hostname. I could able to connect by providing the IP(192.168.1.50) of the system.
    The problem here is If I am out of internet, My system does not have IP, So I am not able to connect to DB
    But I need to submit a project wheere I will not have any internet. Could you please let me know how to connect to DB using localhost
    Following are the listener.ora and tnsnames.ora files.
    listener.ora
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.50)(PORT = 1521))
    =============================
    tnsnames.ora
    # tnsnames.ora Network Configuration File: D:\oracle\product\10.2.0\db_2\network\admin\tnsnames.ora
    # Generated by Oracle configuration tools.
    ORA9 =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.50)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = ora9)
    ORA8 =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.50)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = ora8)
    EMP =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.50)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = emp)
    ORCL =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.50)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = orcl)
    EXTPROC_CONNECTION_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (CONNECT_DATA =
    (SID = PLSExtProc)
    (PRESENTATION = RO)
    Thanks in advance,
    Srini

    Oracle always uses DNS.
    DNS consults the local host file.
    Try in a command box
    ping localhost
    This should work.
    If this doesn't work you need to edit
    %WINDOWS%\'systems\drivers\etc\hosts
    The first line needs to read
    127.0.0.1 localhost
    Sybrand Bakker
    Senior Oracle DBA

  • Maps 3.06 - Could not connect to the service

    It seems that like many others, I too cannot connect to the map server through the ovi suite since maps version 3.06 and Ovi Suite 3.1.1.90.
    It started when I was prompted to update my outdated maps, and the update never completed due to the server error, but my old maps were gone. I uninstalled the applications (Nokia Maps and Ovi Maps) off the phone (5800 MusicXpress), and forced a new installation with "ovi_maps_installer_3.06_11wk10_b01_s60_5.0_com.sis" - since the Ovi Suite didn't even prompt me to install a software update for the maps despite it being gone!
    The only thing I can do now is use the maps in online mode on my phone, and download a voice guidance file via wi-fi. For some reason, I do not even have the possibility to download maps via wi-fi. I would really like to download and manage maps through the ovi suite as I should be able to do and have done in the past.
    Below is my system information. Please advise what else you need as information.
    Nokia Ovi Suite 3.1.1.90
    PC Connectivity Solution 11.4.21.0
    Connectivity Cable Driver 7.1.45.0
    Nokia Ovi Suite Software Updater 2011.7.0.61004
    Maps Service API 4.0.28.3
    Nokia mPlatform 2.7.72
    Ovi Desktop Sync Engine 1.4.4.57
    Operating system:
    Microsoft Windows XP 32-bit Edition, Service Pack 3
    Language: English
    Detected internet browsers:
    - Microsoft Internet Explorer 7.0.5730.13 (Default browser)
    Detected Bluetooth stacks:
    - Microsoft (Version: 5.1.2600, Build: 5512), Active
    - Toshiba (Version: v4.41.02(D)), Active, In use
    Detected USB drivers:
    - Default Hub Driver for USB 5.1.2600.5512
    - USB Modem Driver 5.1.2600.5512
    - EHCI eUSB Miniport Driver 5.1.2600.5512
    Solved!
    Go to Solution.

    farby, after installing the 3.06 version, i no longer have the option to download maps through wifi... i don't see where to access this feature anymore. It is gone and when I look at the description of Map Loader utility on the Nokia support site, it says it is not necessary as 3.06 offers this wifi map download function built in...
    Anyhow, long story short for the initial problem, I decided to test things in another wifi/firewall environment. I took my laptop to work and configured a connection on the local network, putting in the proper proxy username and password in the options of OVI Suite. And to my great surprise, I was able to access the maps once again through the OVI Suite. For some wierd reason, I can access everything including SW updates in my home environment, but not the maps portion. Maybe it's the particular connection the demand to the maps server is asking though my firewall at home that is the issue. To be investigated further, but at least for now, anyone having the same problem should try things out in another wifi/firewall environment.

  • Could not connect to remote server

    Hi,
    I have installed CRM 7.0 and have completed the initial ABAP configuration. My crm_ui_frame service is active, however, when trying to access the Web User Interface using the following command:
      http://stuartfb8e:8000/sap/bc/bsp/sap/crm_ui_frame/default.htm?sap-client=800
    I am informed that the address is currently unavailable.
    Is there anything else that I need to do other than is detailed in the installation guide? For example, I have not setup IIS on my server and I did not complete the ITS configuration as I do not believe that is required.
    Cheers,
    Stuart
    Edited by: Stuart Oliver on Oct 20, 2009 3:53 PM

    I Hope u have imported profiles as part of Post Installation steps. in RZ10 select instance profile --> extended maintainence --> Add parameter
    Parameter --> icm/host_name_full
    Value ---> <Hostname>.sap.com
    Save the profile, and it requires to restart the SAP Application.
    And also in the server and in local desktop from where you are accessing the SAP Application, maintain the details in hosts file also.

  • Server admin could not connect to localhost

    Hi,
    the Problem I have is that I could not connect to the server at localhost. Server admin shows connection error.
    Maybe it is a problem with my certificate state. I have deleted the default one and have to recertificate my own one.
    Any ideas?

    Others have posted in the past that the SA or WGM has 'issues' when the default cert is blown away.
    Have you considered doing a clean install on another volume, then move the default from that install back into your current one? Just an idea before I've had my first coffee.

  • Could not connect to SQL Server 2012 Remotely

    Hello, 
    I have a situation as follows:
    The Server
    SQL Server 2012 Standard Edition installed on Windows Server 2012 Standard Edition
    Active Directory is installed on the same server as well
    Remote Access Role added and configured to connect VPN 
    DNS Role added
    Windows Firewall is disabled
    The Server is connected to the internet 
    SQL Server Service & SQL Browser both are running under domain accounts
    SQL Server allows remote connections
    The Router
    The router that connects the server to the Internet is configured to:
    Enable VPN Tunnels Protocols (PPTP, L2TP and IPSec)
    Forwarding > Virtual Servers (all requests on TCP and UDP on all ports to the server local IP)
    The Client
    PC running Windows 7 SP1 with SQL Server 2012 Express 
    Joined AD on the server
    Connected to the internet
    VPN Connected to the Server
    Can Remote Desktop the Server
    Can ping the server host name
    Can nslookup the server host name
    The Problem
    If Both the Server and the Client are connected in the same Local Area Network, Client can connect to the SQL Serve
    Once the Client is placed in different location connected to the Interent, VPN connected as described above, I could not connect to the Server using:
    Windows Authentication Domain Users or
    SQL Server users
    and the error message is:
    Cannot connect to SERVER\SQLINSTANCE.
    ADDITIONAL INFORMATION:
    A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
    SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
    For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=-1&LinkId=20476
    Any thoughts
    Thanks in advance
     

    Hello Hilary,
    I have been working on a small replication test.
    On the Publisher, things went smooth and the Snapshot Agent was able to work and produce a snapshot written in a shared folder located on the Publisher
    On the Subscriber, as I am testing from SQL Server Express, I had run the following command:
    replmerg.exe -Publisher [SERVER\SQLInstance] -PublisherDB [dbRepl] -PublisherSecurityMode 0 -PublisherLogin rplMergeAgent -PublisherPassword p@ssw0rd -Publication [TEST Publication] -Distributor [SERVER\SQLInstance] -DistributorSecurityMode 0 -DistributorLogin
    rplMergeAgent -DistributorPassword p@ssw0rd -Subscriber [SUBSCRIBER\SQLInstance] -SubscriberSecurityMode 0 -SubscriberLogin rplMergeAgent -SubscriberPassword p@ssw0rd -SubscriberDB [dbRepl] -SubscriptionType 1 -OutputVerboseLevel 2 -Output C:\TEMP\mergeagent.log 
    Where 
    SERVER
    Publisher and Distributor
    dbRepl
    Database to replicate
    Merge Agent
    rplMergeAgent
    Subscriber
    SUBSCRIBER
    dbRepl
    Subscriber Database
    Merge Agent
    rplMergeAgent
    Password
    p@ssw0rd
    rplMergeAgent
    SQL Login defined in both Publisher and Subscriber with same password
    Granted the following at Publisher:
    Login to Publication Database (dbRepl)
    Login to Distribution Database (distribution)
    Member of PAL
    Granted the following at Subscriber:
    db_owner fixed database role in Subscription database (dbRepl)
    I couldn't grant rplMergeAgent Read Permission on SnapshotFolder as it is only a SQL Login.
    When I ran the above command line, I received the following error:
    Message: The schema script 'Person_2.sch' could not be propagated to the subscriber.
    I am pasting below the whole log file written by the above command:
    2014-04-11 15:38:07.205 Microsoft SQL Server Merge Agent 11.0.2218.0
    2014-04-11 15:38:07.342 Copyright (c) 2008 Microsoft Corporation
    2014-04-11 15:38:07.389 
    2014-04-11 15:38:07.406 The timestamps prepended to the output lines are expressed in terms of UTC time.
    2014-04-11 15:38:07.433 User-specified agent parameter values:
    -Publisher SERVER\SQLInstance
    -PublisherDB dbRepl
    -PublisherSecurityMode 0
    -PublisherLogin rplMergeAgent
    -PublisherPassword **********
    -Publication TEST Publication
    -Distributor SERVER\SQLInstance
    -DistributorSecurityMode 0
    -DistributorLogin rplMergeAgent
    -DistributorPassword **********
    -Subscriber SUBSCRIBER\SQLInstance
    -SubscriberSecurityMode 0
    -SubscriberLogin rplMergeAgent
    -SubscriberPassword **********
    -SubscriberDB dbRepl
    -SubscriptionType 1
    -OutputVerboseLevel 2
    -Output C:\TEMP\mergeagent.log
    2014-04-11 15:38:07.497 Percent Complete: 0
    2014-04-11 15:38:07.517 Connecting to Subscriber 'SUBSCRIBER\SQLInstance'
    2014-04-11 15:38:07.518 Connecting to OLE DB Subscriber at datasource: 'SUBSCRIBER\SQLInstance', location: '', catalog: 'dbRepl', providerstring: '' using provider 'SQLNCLI11'
    2014-04-11 15:38:07.608 OLE DB Subscriber: SUBSCRIBER\SQLInstance
    DBMS: Microsoft SQL Server
    Version: 10.50.4000
    catalog name: dbRepl
    user name: rplMergeAgent
    API conformance: 0
    SQL conformance: 0
    transaction capable: 1
    read only: F
    identifier quote char: "
    non_nullable_columns: 0
    owner usage: 15
    max table name len: 128
    max column name len: 128
    need long data len: 
    max columns in table: 1000
    max columns in index: 16
    max char literal len: 131072
    max statement len: 131072
    max row size: 131072
    2014-04-11 15:38:07.613 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': select SERVERPROPERTY ('ProductVersion') 
    2014-04-11 15:38:07.617 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': set nocount on declare @dbname sysname select @dbname = db_name() declare @collation nvarchar(255) select @collation = convert(nvarchar(255), databasepropertyex(@dbname, N'COLLATION')) select
    collationproperty(@collation, N'CODEPAGE') as 'CodePage', collationproperty(@collation, N'LCID') as 'LCID', collationproperty(@collation, N'COMPARISONSTYLE') as 'ComparisonStyle',cast(case when convert (int,databasepropertyex (@dbname,'comparisonstyle')) &
    0x1 = 0x1 then 0 else 1 end as bit) as DB_CaseSensitive,cast(case when convert (int,serverproperty ('comparisonstyle')) & 0x1 = 0x1 then 0 else 1 end as bit) as Server_CaseSensitive set nocount off
    2014-04-11 15:38:07.637 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {?=call sp_helpsubscription_properties (N'SERVER\SQLInstance', N'dbRepl', N'TEST Publication')}
    2014-04-11 15:38:07.681 Distributor security mode: 0, login name: rplMergeAgent, password: ********.
    2014-04-11 15:38:07.682 Percent Complete: 0
    2014-04-11 15:38:07.683 Connecting to Distributor 'SERVER\SQLInstance'
    2014-04-11 15:38:07.684 Connecting to OLE DB Distributor at datasource: 'SERVER\SQLInstance', location: '', catalog: '', providerstring: '' using provider 'SQLNCLI11'
    2014-04-11 15:38:25.062 OLE DB Distributor: SERVER\SQLInstance
    DBMS: Microsoft SQL Server
    Version: 11.00.2100
    catalog name: 
    user name: guest
    API conformance: 0
    SQL conformance: 0
    transaction capable: 1
    read only: F
    identifier quote char: "
    non_nullable_columns: 0
    owner usage: 15
    max table name len: 128
    max column name len: 128
    need long data len: 
    max columns in table: 1000
    max columns in index: 16
    max char literal len: 131072
    max statement len: 131072
    max row size: 131072
    2014-04-11 15:38:28.887 OLE DB Distributor 'SERVER\SQLInstance': select SERVERPROPERTY ('ProductVersion') 
    2014-04-11 15:38:29.842 OLE DB Distributor 'SERVER\SQLInstance': {call sp_helpdistpublisher (N'SERVER\SQLInstance') }
    2014-04-11 15:38:32.198 OLE DB Distributor 'SERVER\SQLInstance': select datasource, srvid from master..sysservers where upper(srvname) = upper(N'SERVER\SQLInstance')
    2014-04-11 15:38:33.199 OLE DB Distributor 'SERVER\SQLInstance': {call sp_MShelp_merge_agentid (0,N'dbRepl',N'TEST Publication',null,N'dbRepl',100,N'SUBSCRIBER\SQLInstance')}
    2014-04-11 15:38:34.451 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:38:34.560 OLE DB Distributor 'SERVER\SQLInstance': {call sp_MShelp_profile (23, 4, N'')}
    2014-04-11 15:38:36.189 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:38:36.499 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_get_redirected_publisher(N'SERVER\SQLInstance',N'dbRepl',0)}
    2014-04-11 15:38:37.396 Percent Complete: 0
    2014-04-11 15:38:37.396 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:38:37.399 Initializing
    2014-04-11 15:38:37.401 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:38:37.403 Connecting to OLE DB Publisher at datasource: 'SERVER\SQLInstance', location: '', catalog: 'dbRepl', providerstring: '' using provider 'SQLNCLI11'
    2014-04-11 15:38:38.427 Percent Complete: 0
    2014-04-11 15:38:38.428 Validating publisher
    2014-04-11 15:38:38.429 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:38:39.455 Percent Complete: 0
    2014-04-11 15:38:39.456 Connecting to Publisher 'SERVER\SQLInstance'
    2014-04-11 15:38:39.457 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:38:46.548 OLE DB Publisher: SERVER\SQLInstance
    DBMS: Microsoft SQL Server
    Version: 11.00.2100
    catalog name: dbRepl
    user name: rplMergeAgent
    API conformance: 0
    SQL conformance: 0
    transaction capable: 1
    read only: F
    identifier quote char: "
    non_nullable_columns: 0
    owner usage: 15
    max table name len: 128
    max column name len: 128
    need long data len: 
    max columns in table: 1000
    max columns in index: 16
    max char literal len: 131072
    max statement len: 131072
    max row size: 131072
    2014-04-11 15:38:50.282 OLE DB Publisher 'SERVER\SQLInstance': set nocount on declare @dbname sysname select @dbname = db_name() declare @collation nvarchar(255) select @collation = convert(nvarchar(255), databasepropertyex(@dbname, N'COLLATION')) select collationproperty(@collation,
    N'CODEPAGE') as 'CodePage', collationproperty(@collation, N'LCID') as 'LCID', collationproperty(@collation, N'COMPARISONSTYLE') as 'ComparisonStyle',cast(case when convert (int,databasepropertyex (@dbname,'comparisonstyle')) & 0x1 = 0x1 then 0 else 1 end
    as bit) as DB_CaseSensitive,cast(case when convert (int,serverproperty ('comparisonstyle')) & 0x1 = 0x1 then 0 else 1 end as bit) as Server_CaseSensitive set nocount off
    2014-04-11 15:38:57.393 OLE DB Publisher 'SERVER\SQLInstance': select SERVERPROPERTY ('ProductVersion') 
    2014-04-11 15:38:59.236 Connecting to OLE DB Publisher at datasource: 'SERVER\SQLInstance', location: '', catalog: 'dbRepl', providerstring: '' using provider 'SQLNCLI11'
    2014-04-11 15:39:07.271 OLE DB Publisher: SERVER\SQLInstance
    DBMS: Microsoft SQL Server
    Version: 11.00.2100
    catalog name: dbRepl
    user name: rplMergeAgent
    API conformance: 0
    SQL conformance: 0
    transaction capable: 1
    read only: F
    identifier quote char: "
    non_nullable_columns: 0
    owner usage: 15
    max table name len: 128
    max column name len: 128
    need long data len: 
    max columns in table: 1000
    max columns in index: 16
    max char literal len: 131072
    max statement len: 131072
    max row size: 131072
    2014-04-11 15:39:45.229 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:39:45.234 Percent Complete: 0
    2014-04-11 15:39:45.235 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:39:45.236 Retrieving publication information
    2014-04-11 15:39:45.238 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:39:46.287 Percent Complete: 0
    2014-04-11 15:39:46.288 Retrieving subscription information.
    2014-04-11 15:39:46.290 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:40:00.472 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:40:00.478 Percent Complete: 0
    2014-04-11 15:40:00.479 Applying the snapshot to the Subscriber
    2014-04-11 15:40:00.480 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:40:02.535 OLE DB Distributor 'SERVER\SQLInstance': select datasource, srvid from master..sysservers where upper(srvname) = upper(N'SERVER\SQLInstance')
    2014-04-11 15:40:03.559 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_mergesubentry_indistdb (0,N'SERVER\SQLInstance',N'dbRepl',N'TEST Publication',N'SUBSCRIBER\SQLInstance',N'dbRepl',1,1,0,N'',?,90)}
    2014-04-11 15:40:04.600 Connecting to OLE DB Subscriber at datasource: 'SUBSCRIBER\SQLInstance', location: '', catalog: 'dbRepl', providerstring: '' using provider 'SQLNCLI11'
    2014-04-11 15:40:04.609 OLE DB Subscriber: SUBSCRIBER\SQLInstance
    DBMS: Microsoft SQL Server
    Version: 10.50.4000
    catalog name: dbRepl
    user name: rplMergeAgent
    API conformance: 0
    SQL conformance: 0
    transaction capable: 1
    read only: F
    identifier quote char: "
    non_nullable_columns: 0
    owner usage: 15
    max table name len: 128
    max column name len: 128
    need long data len: 
    max columns in table: 1000
    max columns in index: 16
    max char literal len: 131072
    max statement len: 131072
    max row size: 131072
    2014-04-11 15:40:04.611 OLE DB Subscriber: SUBSCRIBER\SQLInstance
    DBMS: Microsoft SQL Server
    Version: 10.50.4000
    catalog name: dbRepl
    user name: rplMergeAgent
    API conformance: 0
    SQL conformance: 0
    transaction capable: 1
    read only: F
    identifier quote char: "
    non_nullable_columns: 0
    owner usage: 15
    max table name len: 128
    max column name len: 128
    need long data len: 
    max columns in table: 1000
    max columns in index: 16
    max char literal len: 131072
    max statement len: 131072
    max row size: 131072
    2014-04-11 15:40:07.454 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': sp_MSacquiresnapshotdeliverysessionlock
    2014-04-11 15:40:07.526 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': sp_MStrypurgingoldsnapshotdeliveryprogress
    2014-04-11 15:40:07.530 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': sp_MSissnapshotitemapplied @snapshot_session_token = N'\\SERVER\Snapshot\unc\SERVER$SQLInstance_DBREPL_TEST PUBLICATION\20140411082109\', @snapshot_progress_token = N'\\SERVER\Snapshot\unc\SERVER$SQLInstance_DBREPL_TEST
    PUBLICATION\20140411082109\Person_2.sch'
    2014-04-11 15:40:24.659 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': sp_MSreleasesnapshotdeliverysessionlock
    2014-04-11 15:40:24.663 The schema script 'Person_2.sch' could not be propagated to the subscriber.
    2014-04-11 15:40:24.665 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:40:24.690 Percent Complete: 18
    2014-04-11 15:40:24.692 The schema script 'Person_2.sch' could not be propagated to the subscriber.
    2014-04-11 15:40:24.693 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:40:27.541 Percent Complete: 0
    2014-04-11 15:40:27.542 Category:NULL
    Source:  Merge Replication Provider
    Number:  -2147201001
    Message: The schema script 'Person_2.sch' could not be propagated to the subscriber.
    2014-04-11 15:40:28.563 Percent Complete: 0
    2014-04-11 15:40:28.565 Category:AGENT
    Source:  SUBSCRIBER\SQLInstance
    Number:  0
    Message: The process could not read file '\\SERVER\Snapshot\unc\SERVER$SQLInstance_DBREPL_TEST PUBLICATION\20140411082109\Person_2.sch' due to OS error 1326.
    2014-04-11 15:40:28.566 Disconnecting from OLE DB Subscriber 'SUBSCRIBER\SQLInstance'
    2014-04-11 15:40:28.568 Disconnecting from OLE DB Subscriber 'SUBSCRIBER\SQLInstance'
    2014-04-11 15:40:28.569 Disconnecting from OLE DB Subscriber 'SUBSCRIBER\SQLInstance'
    2014-04-11 15:40:28.570 Disconnecting from OLE DB Subscriber 'SUBSCRIBER\SQLInstance'
    2014-04-11 15:40:28.571 Disconnecting from OLE DB Publisher 'SERVER\SQLInstance'
    2014-04-11 15:40:28.573 Disconnecting from OLE DB Publisher 'SERVER\SQLInstance'
    2014-04-11 15:40:28.575 Disconnecting from OLE DB Publisher 'SERVER\SQLInstance'
    2014-04-11 15:40:28.577 Disconnecting from OLE DB Publisher 'SERVER\SQLInstance'
    2014-04-11 15:40:28.578 Disconnecting from OLE DB Distributor 'SERVER\SQLInstance'
    2014-04-11 15:40:28.579 Disconnecting from OLE DB Distributor 'SERVER\SQLInstance'
    I can say it is about how can the rplMergeAgent read the Shared folder.
    What do you think?

Maybe you are looking for

  • First occurence of a value from a  field in the internal table.

    How to select the first occurence of a value from a field in an internal table ? I don think , we can use select query . Any suggestions? provide syntaxs also .

  • PDF in browser won't open another PDF

    I've built a Flash Projector file that opens a PDF on a CD (in the same folder as the Projector file) using getURL, so the PDF opens in a browser Window. That part works fine, however within the PDF that opens are links to other PDFs on the CD. When

  • AE CS6 AUDIO NOT IN SYNC WITH VIDEO

    for some reason my video in AE that i am rendering is not in sync audio wise however i have the original file and the audio is fine. why is it that in AE the video is not in sync? i previewed it many time in different scenes however when the video hi

  • Crystal Reports Server :Unable to connect: incorrect log on parameters

    Hi there, I am getting the following error in Crystal Reports Server  when i try to preview or schedule a Crystal Report on an Access 2000 database. Unable to connect: incorrect log on parameters The Access database does not have has not username or

  • Ampersand entity reference

    Hi, I'm facing a peculiar problem with the entity elements. I know that some entities, like & (ampersand) and ' (apostrophe) are built-in entities specified as &a m p; and '. However, when I send something like this: <Company_Name>Jagan & Kirti's Inc