Could not connect to the server "localhost". Need Help!!!!!!

I have installed CF MX 7.0.1 in my Mac (Intel Duo), but, for
some reason I have to configure my "built-in-server" manually!!!
When I tried to access to te configuration wizard @
http://localhost:8500/CFIDE/administrator/index.cfm
I get an error message: Could not connect to the server
“localhost”. Please, help!!!!!!
I uninstalled and reinstalled CF several times... no luck...
I don't have experience with this product and at this point I'm
going crazy!!!
Thanks...
Natacha
Text

quote:
Originally posted by:
lyfizgood
I too am having problems with this. I purchased Studio8 and
using the ColdFusion Getting Started tutorial, I get as far as
testing server settings in Dreamweaver. But then when instructed to
enter the RDS password, I get '1. The url specified for this site's
testing server may be incorrect:
http://127.0.0.1:8500/CFIDE/administrator/
2. The testing server may be incorrectly configured (for example,
ColdFusion may not be running).' I have tried not including 8500,
changing to localhost, CFIDE/gettingstarted/tutorial, etc. I have
also checked to see if jrun.exe is running to verify that CF is
running. I assume that is one way of verifying. Any suggestions?
Lyfisgood... youre using windows right? If so you may want to
actually open a second thread... I saythis only as youll probably
get more of a response as there seem to be more peopel running it
on Win than OS X. But ill try and help as much as i can... ive
installed on XP before so maybe ill have something of value to
offer.
Do you have windows firewall or any other firewall running?
Are you sure its actually running on port 8500 as opposed to
8000,8100, 8001?

Similar Messages

Safari will not open on my iPad Air...."Safari cannot open the page because it could not connect to the server." There were recent updates on my iPad Air. How can I fix this problem?

How can I correct the issue of Safari not connecting on my iPad Air? It was working great 2 days ago.....now on September 20 it is not working! I have an internet connection but Safari will not open. "Safari cannot open the page because it could not connect to the server."

Hello Beckieor,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning network issues:
iOS: Troubleshooting Wi-Fi networks and connections
Follow these steps to troubleshoot the above issues:
Be sure you're in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

How to fix ipad error -1004 "could not connect to the server"

I am trying to access the tablet edition of Vanity Fair. I already have a subscription and when I click on the "Tap here for acces to the tablet edition" it takes me to a screen & this error message pops up:
Cannot Open Page
This page cannot be opended because of an error
This error is "Could not connect to the server."(-1004).
I have deleted, reinstalled via itunes on my mac, done a hard restart and nothing seems to be working. I can browse the web using safari and am connected to the internet via wifi.
Any suggestions?

I have the same issue, too. My New Yorker subscription is fine, always has been. But my Conde Nast Traveler subscription won't work. I can get to the screen where you enter your information (either with name and address or subscription number and zip code), but once I press Continue I get the error.
I emailed Conde Nast's customer service, and this is what they said:
Dear Subscriber:
Please accept our sincere apologies for the inconvenience you have
experienced.
We have applied a fix to the app for the server error and you will need
to close and re-open your app. To do so, please double click the "home"
button to close the running app and then re-open your app.
Please let us know if you still experience any problems.
If you should need further assistance, please be sure to include all
previous e-mail correspondence.
Thank you for your interest in Conde Nast Traveler.
Sincerely,
Shar
That didn't work. I tried the restarting the iPad, as someone here suggested, but that didn't work, either. Interesting that this seems to be a Conde Nast issue - my NY Times and National Geographic subscriptions are just fine, too.
I'm afraid I'm not sure what the guidance in this knowledge base article means: "Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software." How does one do that on one's iPad?
I actually wonder if it's a firewall issue. Are any of you attempting to enter this information at work, for example? I am, and my company has a firewall/proxy that gives me issues sometimes. I'm going to try to find a wifi hotspot at lunch to see if it'll work there.

Oracle Beehive Conferencing -- "Could not connect to the server"

Hi,
Customer can't connect to the Conference, while joining they get a error "Could not connect to the server". We tried "Oracle Beehive Conferencing" with at least 12 Customers only 2 were able to connect. All 10 Customer reported the same issue.
Thank you,
Pavan

Ports 80/443 are open by default on all systems, 5224 is required by the Beehive Desktop conference client. If customer is trying to connect using Desktop client then they need to check if 5224 port is closed by any firewall running on the system.
Following document got the compatible OS list and few screen shots
http://my.oracle.com/site/pdit/BusinessOpsIT/Collab/CustomerAdvocacy/Support/UserTrainingGuides/BeehiveUTG/Conference/ConferenceWeb/index.html
Thanks,
Jereen

"safari cannot open the page because it could not connect to the server"

As stated above. I have had this problem for the last 2-3 days. I have always been able to connect to the internet over wi-fi using my iphone but this problem had persisted these few days. This is a problem because my iPhone shows that I do have connection to the internet. ( I assume this from looking at the internet signal stregth bar at the top of the screen.) My laptop and computer have no problem but the message "safari cannot open the page because it could not connect to the server," keeps on appearing on my phone whenever I try to access the internet.
If it is of any relevance I use an iPhone 4s, reasonably new, practically 2 months. I have never had problems before this. Thank you for your help in advance.

The connection strength icon you are referring to has nothing to do with the Internet. It simply indicates the strength of your connection to your local WiFi network. However, even when this icon appears you may not really be connected to your WiFi network.
Your router may not have given your iPhone a valid local network IP address. To check on this go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix for this can be as simple as restarting your router (remove power to it for 30 seconds and restart). Next, reset network settings on your iPhone (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

Configuring OS X Server 3.1.2 : server.app fails with "Could Not Connect to the Server"

Hi All,
I am trying to install OS X Server using server.app 3.1.2. but after installation when i try to connect it is giving "Could Not Connect to the Server" error. is there any way to find out the logs or debug this problem. Since the error isn't giving any indication of the reason of the failure.

Hi Linc,
Thanks for you prompt reply, below are the logs....
9/15/14 7:56:58.229 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 7:57:28.287 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 7:57:58.315 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 7:58:24.653 AM netbiosd[125]: findReachableAddress: Using port 139 family = 33
9/15/14 7:58:28.379 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 7:58:58.428 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 7:59:13.752 AM netbiosd[125]: findReachableAddress: Using port 139 family = 33
9/15/14 7:59:28.496 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 7:59:58.568 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 8:00:06.460 AM netbiosd[125]: findReachableAddress: Using port 139 family = 33
9/15/14 8:00:16.854 AM Console[369]: setPresentationOptions called with NSApplicationPresentationFullScreen when there is no visible fullscreen window; this call will be ignored.
9/15/14 8:00:28.567 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 8:00:58.623 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 8:01:16.101 AM netbiosd[125]: findReachableAddress: Using port 139 family = 33
9/15/14 8:01:28.668 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 8:01:53.596 AM WindowServer[95]: CGXGetConnectionProperty: Invalid connection 42003
9/15/14 8:01:53.752 AM ocspd[84]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7fa6c9e102a0> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 8:01:53.954 AM com.apple.serveralertproxy[386]: ApplePushService: APSConnection being used without a delegate queue
9/15/14 8:01:58.666 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 8:02:14.303 AM netbiosd[125]: findReachableAddress: Using port 139 family = 33
9/15/14 8:02:28.669 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 8:02:58.697 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 8:03:10.186 AM netbiosd[125]: findReachableAddress: Using port 139 family = 33
9/15/14 8:03:28.699 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 8:03:58.726 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 8:04:06.022 AM netbiosd[125]: findReachableAddress: Using port 139 family = 33
9/15/14 8:04:28.782 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)

IPad2- Safari cannot open the page because it could not connect to the server? Internet works but this message continues to pop up. My iPhone works fine and iPad has been working great until a few days ago.

IPad2- cannot open page, Safari cannot open the page because it could not connect to the server? Internet works but this message continues to pop up. My iPhone works fine and iPad has been working great until a few days ago.
Message is almost acting like a pop up.

Hi
I constantly get same message. When I open up my windows laptop all works fine so I guess it's a bug that apple refuse to admit to.

CS5 - Contribute could not connect because the server is down

we have a client who has site hosted with us. They are using Contribute CS5 to connect to our web server and make changes to their site. They've been using Contribute for a month when all of a sudden they started receiving the error:
Contribute could not connect because the server is down or not accepting connections. Please contact your administrator.
Our server is up and running, their site is up, their ftp password is not locked and network said they can see can see end to end FTP transactions, logins and authentications. Communications between the application and the server is being allowed through all the various firewalls and devices along the way.
I've done some research but cannot find a definitive resolution. Any help with your product would be appreciated.

Can you please try clearing the Contribute preferences once?
In Windows -
Quit Contribute.
Go to C:\Documents and Settings\<username>\Local Settings\Application Data\Adobe\ and delete the Contribute CS5 folder. (In Windows Vista or Windows 7, go to C:\Users\<username>\AppData\Local\Adobe\ and delete the Contribute CS5 folder.)
Also, run reg delete "HKCU\Software\Adobe\Contribute 6" /f
In Mac -
Quit Contribute.
Go to Users/<username>/Library/Application Support/Adobe/ and delete Contribute CS5 folder.
Also, go to Users/<username>/Library/Preferences and delete Adobe Contribute 6 Preferences file.
Note: Doing this will remove all the existing connections in Contribute. It will be like a fresh installtion of Contribute.

Contribute 3: Could not connect because the server is down or not acceptiong connections.

Hi,
I have two customers who use Contribute 3 and are currently
having the same problem:
When they want to Publish a page, they get the following
message: Contribute encountered a network or file system error.
Then they can click on "Connect" and get: Contribute could
not connect because the server is down or not accepting
connections.
They don't have an internet connection problem, there's no
firewall that blocks Contribute.
Regards,
A.

I have spent many hours trying to get reconnected to my site.
My PC died in early January and I have not been able to get
reconnected since. I get the same error message. My Network
Aministrator has worked with me to see if there are any firewall or
antivirus issues blocking the connection. I administer the site so
have had to do elaborate work arounds to get users' pages
published. I am using WebDAV. My question: I would like to try
creating a new username and password (which is about the only thing
I have not tried yet.) If I do so, and get connected, I should be
ok with sending a new connection key to the users, is that
correct??

Contribute could not connect because the server is down"

My client tries to connect to the website with Contribute and
gets the error "Contribute could not connect because the server is
down" however I connect with no problems, using Contribute or
Dreamweaver.
I sent him a new connection key but the same error.
Only problem I ever have is that sometimes I get a "can't
save files to shared something-or-other" on exit after
administrating, but I don't know if that's related or not - it
never seems to affect anything at my end.
Please help! Thanks

OK, problem solved here:
The access denied or file does not exist error was being
caused by the fact there was a 0KB index file somehow.
Once we got rid of that we still had the "Contribute could
not connect because the server is down or not accpeting
connections" error to get round.
I had previously asked my client to go in an change the FTP
settings in the Advanced screen to be Choose FTP server settings
manually and select Use Passive FTP to connect to the server and
make sure Use FTP Performance Optimization is not selected. I don't
think this was ever done (and if it had been it would have saved me
HOURS of time spent trying to diagnose this problem).
Today I ended up backing up every contribute related file and
folder on the server to my local machine then deleting them. After
having done that I asked my client to create a new connection using
the FTP details (not a connection key). That still didn't work so I
got them to (and this time they did it) change the advanced FTP
settings as above and BINGO! they can now publish.
I'm guessing that if I had sent a connec tion key with the
same settings specified in the Advanced FTP then it still would
have worked.
I hope this saves someone else some time. I am going to have
a few beers now to celebrate.

Server.app "Could not connect to the server."

I just downloaded and installed Mountain Lion (the day after its release). It seems fine so far.
The next day I decided to install Mac OS X Server, so I dished out $20 and downloaded it from the App Store.
"setting up your server is incredibly simple" - Yeah okay. This is exactly what I do:
1) Open server. The "Set up your server" screen comes up.
2) Click "Continue".
3) Click "Agree".
4) Authenticate
I get a dialog box that slides down and says, "Could not connect to the server." The only option is "OK".
5) I select Manage->Connect to server..., and choose "This mac" from the list and click "Continue". It brings me back to the same screen that I started with.
6) Repeat 1-4. Same results, except that the application exits (gracefully - but with no feedback).
There aren't many options at all and I can see nothing else I can even try. I'm on a Mac Pro connected wirelessly to a Time Capsule. I also have a MacBook Pro, which curiously got further than I could get on the Mac Pro. Both computers are connected wirelessly to the same network and configured the same (as far as I can tell). The Mac Pro has far superior hardware compared to the MacBook Pro. (MP: 6-Core 3.33 Xeon / 24GB RAM/ 1TB HD / MBP: 1 Core2 Duo 2.4 GHz, 4 MB RAM, 160 GB HD). Both computers are running Mountain Lion.
I'm completely new to using OS X Server. I figured I could learn something with it for only $20. If I left out any important details, please let me know.
There's no documentation out there for this new product and I could find nobody else who has had any similar issues. Any help is greatly appreciated.

It works now but here's the thing...
When I was at home with my Mac Pro on the wireless is when it wouldn't work. I was able to install and get further on my MacBook Pro (which is much older) on the same wireless.
I brought my Mac Pro to work (different LAN), connected it to the wired connection, and tried the Server software. Same results - "Could not connect to server."
I had a few other issues with crashing and for some reason my Terminal was displaying "brucetablet:" at the command prompt. I bought the computer used and it came with Lion pre-installed. I upgraded to Mountain Lion and it just seemed like a lot of weirdness, so I decided to wipe the hard drive and do a clean install of Mountain Lion.
After the clean install, I tried again and it seems like it works just fine.
That annoying "brucetablet:" is still there though (which I guess is a topic for another thread).

Could not connect to the server because the name or password is not correct

Everyday I use Command + K to bring up the "Connect to Server" dialog, select the server from "Favorite Servers", click the Connect button, receive a prompt to provide my credentials to access the network share, then the share mounts and I access the files on it.
Starting yesterday I no longer get the prompt asking me to provide the domain, username and password, it just tries to connect to the server then reports the following error:
"Could not connect to the server because the name or password is not correct."
I've restarted my Mac but still does the same thing. I'm able to connect to other server shares just fine, prompts me for the username and password, but this one particular server just will not prompt me for the username and password.
I've done the following to try and resolve it but without any success in doing so:
I've restarted the server
I ran Repair Disk Permissions in Disk Utility
Ran Keychain Access --> First Aid --> Repair
Tried to find an entry in Keychain to remove, none listed
Able to connect to share within Fusion running XP
Anything I missing?

Hi Troy-
It surely is starting to look like it's some kind of security setting on the Win-Server...something that's different from the other server you just patched.
If you've looked at local and domain policies that do not 'require' digital signing, then I'm a a loss. (I don't have the exact settings, but it's been discussed here ad nauseum over the past two years)
Has something to do with disabling digital signing of communications "always", and enabling "when possible"... other than that, I've forgotten the exact policies...Look in security policies, and you'll probably see what I'm trying to describe.
(Glad I got my daily brain-hiccup out of the way early today!)

Could not connect to the server mail; the connection refused

Dear Sir/Mam
The thuderbird was working fine. All of sudden, when I click on Thunderbird it is showing the following message "could not connect to the server mail; the connection refused". I am attaching the connection setting in this mail. Please help me out.
Kind regards,
Server type: IMAP
Server Name: mail.ncbs.res.in
port: 993
Connection security: SSL/TLS

https://support.mozilla.org/en-US/kb/problems-sending-and-receiving-messages

Safari cannot open the web page becauseit could not connect to the server.

Hello, recently I have been trying to access a web page that I can only access if I delete the "www." in my browser before I hit the "go" button. If I do not delete the "www." I get the error message "Safari cannot open the page because it could not connect to the server. I have tried restarting my ipad 2 by holding down the home and lock button but it has not worked, I do have 7 tabs open right now but I dont think that would be a problem would it? I have full internet access so I dont think tap hat would be it.

That didnt work :/ This website is hosted on a platform called enjin and I have noticed every enjin website is doing this to me so could it be something on there end? I havnt heard from anybody else who is having the same problem.
The website looks different from what it did before this started happening to me, here is a screenshot of what it looks like now.
[img]http://imgur.com/cWvR95e[/img]

TS1702 Hello, we have a Mac and an ipad,the Mac is working and wifi is on and the Ipad's wifi is on too, but Ipad Safari can not open because it could not connect to the server, does any one know what have happened?

Hello, we have a Mac and an ipad, the Mac is working and wifi is on and the ipad's wifi is on too, but Ipad Safari can not open the page because it could not connect to the server, does any one know that?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Could not connect to the server "localhost". Need Help!!!!!!

Similar Messages

Maybe you are looking for