Could not connect with Oracle 9iAs Portal
I have already install oracle9iAs ,but when I try to connect to
oracle 9i AS portal , the server return these messages to me :
Proxy log On failed.
Please verify that you have specified correct connectivity
information i.e.username, password & connect-string in the
Database Access Descriptor
Error-Code:6401
Error TimeStamp:Thu, 18 Oct 2001 08:22:24 GMT
Database Log In Failed
TNS is unable to connect to destination. Invalid TNS address
supplied or destination is not listening. This error can also
occur because of underlying network transport problems.
Verify that the TNS name in the connectstring entry of the DAD
for this URL is valid and the database listener is running. "
How could I do ???
Thank you !
Shi
Check out the FAQ document on portalstudio:
http://otn.oracle.com/products/iportal/htdocs/portal_faq.htm#Inst
allation
And Troubleshooting section of the Configuration Guide:
http://otn.oracle.com/docs/products/ias/doc_library/1022doc_otn/p
ortals.102/a90096/toc.htm
Similar Messages
-
Could not connect to Oracle database. (HY000): BI Answers Problem
Hi,
I am using OBIEE 11g and 11g admin client tool is installed in my machine. I created one rpd and I deploy that rpd in the server through Enterprise manager fusion middleware control. But when try to run the analysis from BI answers it throws and error like
"TNS:could not resolve the connect identifier specified at OCI call OCIServerAttach. [nQSError: 17014] Could not connect to Oracle database. (HY000)".
In the rpd I use OCI default (10g/11g) and cheked that connection is successful and also when I click on view data option in the physical layer I am able to see the data. I cheked with DBAs and correct TNS entries are also there in the server. Could not understand where is the problem.
Please help.
Thanks
TitasTry like this
Call Interface: Default (OCI 10g/11g)
Data source Name->localhost:1521/XE
BTW: Whats the client bit version 32/64 bit, if you have 64bit and above is not working try with Oracle client 32bit.
Pls mark correct/helpful if helps -
ORA-12154: TNS:Could not connect to Oracle database.
Hi All,
I'm getting the following error while trying to access OBIEE dashboard.
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 17001] Oracle Error code: 12154, message: ORA-12154: TNS:could not resolve the connect identifier specified at OCI call OCIServerAttach. [nQSError: 17014] Could not connect to Oracle database. (HY000)
I have oracle 10g R2, I can connect my database using SQLPLUS. I am not able to do Update Row Count from Admin tool also. If anyone come across this issue, please share your experience. Anyhelp would be appreciated.
Thanks,
RaviThe problem is OBIEE server not able to read the tnsnames.ora file. That depends upon the what you set as ORACLE_HOME. that can be find with tnsping command at command line. Follow this article about setting up oracle home and oci drivers
http://oraclebizint.wordpress.com/2007/10/03/oracle-bi-ee-101332-identifying-oracle-homes-for-oci-drivers/
please make sure that your DB-home is the first entry in your PATH environment variable.
Have you created TNS_ADMIN environment variable. Create a environment variable TNS_ADMIN which maps to location where tnsnames.ora file located.
let me know if you are not able to load after this steps.
- Madan -
The MOF Compiler could not connect with the WMI server
I am trying to add node2 to SQL cluster (2008) However, I kept running into errors with the following error message:
"The MOF Compiler could not connect with the WMI Server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the failure of the WMI Server to start".
I checked on the WMI services, they are started and running.renamed the WMI repository. but nothing worked .
Any idea what settings I need to change in order to ensure a successful instalation and add node 2 to sql cluster.Hi,
Did SQL Server failed during installation and you somehow brought services online. Or it failed and next time you executed it succeeded IMO this error pops up because of remnants of failed installation on Node 1. With cluster specially if Installation on
node 1 fails you should uninstall completely and remove all files related to SQL Server and then proceed.
Have a look at below connect,see workaround and information posted by MS
https://connect.microsoft.com/SQLServer/feedback/details/356258/the-mof-compiler-could-not-connect-with-the-wmi-server
If above still not helps please post complete setup log file
%Program files%\Microsoft sql server\100\Setup bootstrap\Log\ folder.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles -
SQL 2012 installation Error-The MOF compiler could not connect with the WMI server
Hi all,
I am getting below error while installing SQL 2012 Dev edition in Win 8.1 Pro.
I am facing lot of issues while installing SQL 2012 in Win 8.1 Pro.Any other steps we need to take to install SQL 2012 in Win 8.1.
Thanks in advance.Installation:
Installation for SQL Server 2012
Hardware and Software Requirements for Installing SQL Server 2012
Installing the .NET Framework 3.5 on Windows 8 or 8.1
About "The MOF compiler could not connected with the WMI server" error message:
Please, verify the Windows Management Instrumentation has status "started" and is set with Startup Type "Automatic". (Alberto Morillo, SQLCoffee.com).
José Diz Belo Horizonte, MG - Brasil -
I am trying to install SQL Server 2008 in my local machine. However, I kept running into errors with the following error message:
"The MOF Compiler could not connect with the WMI Server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such
as the failure of the WMI Server to start".
I also ran "rundll32 wbemupgd, UpgradeRepository" to rebuild WMI repository, it doesn't help either. I got the same error message.
Any ideas what settings I need to change in order to ensure a successful installation of SQL Server 2008?"The MOF Compiler could not connect with the WMI Server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such
as the failure of the WMI Server to start".
I also ran "rundll32 wbemupgd, UpgradeRepository" to rebuild WMI repository, it doesn't help either. I got the same error message.
Any ideas what settings I need to change in order to ensure a successful installation of SQL Server 2008?
can you check below two links.Make sure previous failed installation is removed completely.
http://connect.microsoft.com/SQLServer/feedback/details/356258/the-mof-compiler-could-not-connect-with-the-wmi-server#
Solution given by Connect MS is:
Possibly the issue was caused by uninstalling from add-remove programs - at any rate, using aaron bertrand's suggestion below fixed the issue. Also of note - I used the local admin for the install.
http://sqlblog.com/blogs/aaron_bertrand/archive/2009/02/20/the-xp-sp3-msxml6-sp2-sql-server-debacle.aspx
yes - remove msxml6 and any other half installed portion of sql 2008 and REBOOT and install sql
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
Could not connect to oracle OLAP
Hi
when i connect to Disco. Plus for "OracleBI Discoverer for OLAP" and Database as "localhost:1521:orcl" i got this message:
"D40-Could not connect to oracle OLAP"
so i run a Quick Diagnosis and i got this report:
JDK version = 1.4.2_04
BI Beans internal version = 3.2.1.0.13
Discoverer Plus OLAP version = 10.1.2..07.59
Discoverer Version = 10.1.2.45.46c
Connect to database = successful
JDBC driver version = 10.1.0.3.0
JDBC JAR file location = \localhost\disco\plus_files\d4o_double.jarjar
Database version = 10.1.0.4.0
OLAP API Server version = 10.1.0.4.0
OLAP AW Engine version = 10.1.0.4.0
OLAP Catalog version = 10.1.0.4.0
BI Beans Catalog version = N/A; not installed in younis
Discoverer Catalog version = N/A; not installed in younis
Authorized for Discoverer Plus OLAP = No!
OLAP API JAR file version = 9.2
OLAP API JAR file location = \localhost\disco\plus_files\d4o_double.jarjar
Load OLAP API metadata = Successful
Number of metadata folder = 1
Number of metadata measures = 3
Number of metadata dimensions = 4
Thanks
YounisI think you forgot grant OLAP_USER, D4OPUB role to younis
Make sure D4OSYS user is created. D4OSYS is the owner when the Discoverer OLAP catalog is created.
Make sure the OLAPSYS user and OLAP_USER/OLAP_DBA role is created in order to grant D4OPUB. You might need to run $ORACLE_HOME\olap\admin\olap.sql to create those accounts eventhough you have OLAP option installed.
I found directly install latest Oracle database patchset (10.1.0.4) and then create database doesn't have those accounts automatically, unless you are upgrade from 10.1.0.3.
Hope this can help -
D40-1015 Could not connect to Oracle OLAP
Hello,
I have installed new 10g R2 database on Sun Solaris 64 bit, When I access the discoverer I am getting this 'D40-1015 Could not connect to Oracle OLAP' error. I have installed OLAP and XDB everything.
How do I recover from this error, any idea would be greatly appreciated.
FYI,
OracleBI Discoverer
Diagnose Connection
BI Beans Catalog Version....=N/A; not installed in uv
Discoverer Catalog version....=N/A; not installed in uv
Thanks,Hi,
Did you install the Discoverer catalog and authorize users? (see the Configuration Guide)
Regards -
Forms 6i is not connecting with Oracle 11g database?
Forms 6i is not connecting with Oracle 11g database?
How to resolve this issue?Hi,
Once you installed the Forms and Reports, you need to configure the paramters like tnsnames.ora in you path.
There will be one folder in the Installation path of Forms and Reports search for tnsnames.ora file..and you need to Updated the file as per the which ORACLE Server you are connecting and then try.. it..
Default path for forms will be "ORACLE_HOME/net80/admin".. search for tnsnames.ora and modify it..
- Pavan Kumar N -
Could not connect to Oracle database from excel macro. Getting connection not open.
Hi all,
I could not connect to oracle database using excel macro. After much R&D also, I cannot find right solution. Please help me where I am doing wrong.
Sub Button2_Click()
Dim Conn As New ADODB.Connection
Dim RS As New ADODB.Recordset
Dim Cmd As New ADODB.Command
Dim sqlText As String
Dim Row As Long
Dim Findex As Long
Dim Data As Worksheet
Dim X As Long
Dim UID As String
Dim PWD As String
Dim Server As String
Dim strCon As String
Application.Calculation = xlCalculationManual
UID = "myUserid" 'Enter the User ID
PWD = "myPassword" 'Enter the password
Server = "myHostname or myServername"
Set Data = Sheets("Sheet2")
Data.Select
Range("A:J").ClearContents
strCon1 = "Provider = Microsoft.ACE.OLEDB.12.0;DATA SOURCE=myHostName;Database=myDBname;uid=myUserid;pwd=myPassword;"
Conn.Open (strCon1)
Cmd.ActiveConnection = Conn
Cmd.CommandType = adCmdText
' Put your query next
sqlText = " select * from table "
Cmd.CommandText = sqlText
Set RS = Cmd.Execute
For X = 0 To 17
Data.Cells(1, X + 1) = RS.Fields(X).Name
Next
Do While Not RS.EOF 'this loops through the data and puts it in the spreadsheet
Row = Row + 1
For Findex = 0 To RS.Fields.Count - 1
Data.Cells(Row + 1, Findex + 1) = RS.Fields(Findex).Value
Next Findex
RS.MoveNext
Loop
Application.Calculation = xlCalculationAutomatic
Application.Calculate
End Sub
sammyI have set oci.dll in to the path specified. Prior to this I musy say that, I have 64 bit excel 2010 & installed respective drivers from the link provided http://www.oracle.com/technetwork/database/windows/downloads/index-090165.html
But
still I am facing as:-" Provider cannot be found. It may not be properly installed."
sammy -
Devloper form 6i not connect with oracle 8i
hi master
sir i have devloer form 6i and newly install oracle 8i database but my form not connect with database
how i connect with database
please give idea
thanking you
aamirchange the tnsnames.ora you're forms 6i is using. Usually in the net80\admin path of your forms 6i home.
-
Could not connect to Oracle Server...
Hi All. I set up a Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 on a Win XP Pro machine (say Machine A). When I tried to connect to the database using SQL*Plus from another machine (say Machine B) its throwing error...
ORA-12170: TNS: Connect timeout occurred
When I tried to telnet by IP...its saying
Connecting To xx.xx.xx.xx...Could not open connection to the host, on port 23: Connect failed
But its pinging successfully to this IP.
I have added a TNS entry to the Machine B tns.ora.
Please let me know what to do next?
I'm able to connect to database form Machine A through SQL*Plus.>> Connecting To xx.xx.xx.xx...Could not open connection to the host, on port 23: Connect failed
What command did you try check this??
Did you try to telnet as follows
telnet ip database_port i.e. telnet xxx.xxx.xxx.xxx 1521
>> I have added a TNS entry to the Machine B tns.ora.
Are you able to tnsping the tns service?
c:\>tnsping <tnsnames entry>
Regards,
Sabdar Syed. -
ORA-03114 not connected with Oracle when I execute Query
Hi!
I have a Problem with Oracle 9 but I don't know what wrong.
When I execute this query I get an error everytime:
select * from
perleist pl
left outer join leikat l on pl.lsnr = l.lsnr
where pl.von < sysdate
and
pl.id not in
select idperleist from rechaus
where buch_schl <> 'STRN'
It's not the complete select but the point is I use
"left outer join leikat l on pl.lsnr = l.lsnr"
( not the (+) - Opoerator) and a "not in" -Clausel.
Without the "not in" -Clausel the select runs fine.
Sorry for my bad english g
Thx for help :)
MichaelHi!
My Selection doesn't run :((
The Selection runs with (+) -Join and not with "left outer join" .
i need the "left outer join" couse the Application runs on Oracle
and Interbase with same Selections. Other Selections with "left outer Join"
are running under my Oracle 9.2 Database.
Here something I tested:
Selection runs with (+)- Join and count ():
select count(pl.id) anz
from perleist pl , leikat l
where
pl.lsnr = l.lsnr (+)
--left outer join leikat l on l.lsnr = pl.lsnr
and (pl.von <= to_date('30.09.2002', 'DD.MM.YYYY')) and (pl.bis >= to_date('01.09.2002', 'DD.MM.YYYY'))
and (l.RelAbr = 1)
and (pl.AufnNr = 13464)
and (pl.id not in (select idperleist from rechaus where ((BuchSchluessel <> 'STRN') or (BuchSchluessel is null)) and (StornoDat = to_date('30.12.1899', 'DD.MM.YYYY')) and (AbrJahr = 2002) and (AbrMonat = 9)))
Runs without count() and with "left outer join" :
select --count(pl.id) anz
from perleist pl
left outer join leikat l on pl.lsnr = l.lsnr
where (pl.von <= to_date('30.09.2002', 'DD.MM.YYYY')) and (pl.bis >= to_date('01.09.2002', 'DD.MM.YYYY'))
and (l.RelAbr = 1)
and (pl.AufnNr = 13464)
and (pl.id not in (select idperleist from rechaus where ((BuchSchluessel <> 'STRN') or (BuchSchluessel is null)) and (StornoDat = to_date('30.12.1899', 'DD.MM.YYYY')) and (AbrJahr = 2002) and (AbrMonat = 9)))
Error ORA-03114 when usinf count () and
"left outer join":
select count(pl.id) anz
from perleist pl
left outer join leikat l on l.lsnr = pl.lsnr
where
(pl.von <= to_date('30.09.2002', 'DD.MM.YYYY')) and (pl.bis >= to_date('01.09.2002', 'DD.MM.YYYY'))
and (l.RelAbr = 1)
and (pl.AufnNr = 13464)
and (pl.id not in (select idperleist from rechaus where ((BuchSchluessel <> 'STRN') or (BuchSchluessel is null)) and (StornoDat = to_date('30.12.1899', 'DD.MM.YYYY')) and (AbrJahr = 2002) and (AbrMonat = 9)))
Selection runs without "not in"
Selection runs without count()
Selection runs with (+) and not with
"left outer join"
Thx for help :)
MD -
Could not connect with nokia pc suite
I have one nokia 2690 and in its connectivity option is given nokia pc suite. I installed nokia pc suite 7.1 on pc. But when i tried to connect my phone with usb cable a message from the bottom right corner of the taskbar of pc pops up and says "usb device not recognised" and also "click this balloon to fix this problem". When I clicked on the balloon it opened a window in the first tab of which my usb posts were listed- one was showing HID COMPLIANT MOUSE and the other in which i had connected the phone was showing UNKNOWN DEVICE. The other tab was of DRIVER and it shows No drivers are installed for this device. But I know that windows and nokia pc suite automatically install required drivers. I disconnected cable from my phone and also switched the usb ports but again the same message appeared. I also uninstalled each and everything that nokia pc suite installed on my pc and also the nokia pc suite itself and again reinstalled pc suite but of no help.What would you suggest- is my cable not compatible with my phone(i borrowed it from my friend but it connect to my phone perfectly) or the cable is damaged or nokia pc suite version 7.1 not compatible with nokia 2690 or anything else? Thanks...
Solved!
Go to Solution.Mj007 wrote:
I have asha 305 but it's not conneting with nokia pc suite. In nokia asha 305 there is no option of pc suite ,it just has nokia suit.
You may select the Nokia Suite option and see whether it gets connected..or use the Nokia Suite instead ... -
Can Not Connect with Oracle.
OK I can connect and add a new data source when I am in the Creator IDE. When I run the application in gives me the error below. What I have found is the system does not create the JDBC resource and the JDBC Connection pool on the Application Server. Is there a way I need to push this down? I have not had to do this whenm I made test apps in PointBase, do I need to do it when I am using Oracle connection.
Thank
Mark Singleton
The Error:
java.lang.NullPointerException
at com.sun.sql.rowset.JdbcRowSetXImpl.prepare(Unknown Source)
at com.sun.sql.rowset.JdbcRowSetXImpl.execute(Unknown Source)
at pachange.Page1.submit_action(Page1.java:153)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:126)
at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:72)
at javax.faces.component.UICommand.broadcast(UICommand.java:312)
at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:267)
at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:381)
at com.sun.faces.lifecycle.InvokeApplicationPhase.execute(InvokeApplicationPhase.java:75)
at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200)
at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:90)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:197)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:246)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:500)
at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:268)
at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:162)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:236)
at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:145)
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:141)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:220)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:109)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:522)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:214)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:168)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:109)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:522)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:144)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:109)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:133)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:107)
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:539)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:107)
at com.sun.enterprise.webservice.EjbWebServiceValve.invoke(EjbWebServiceValve.java:134)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:107)
at com.sun.enterprise.security.web.SingleSignOn.invoke(SingleSignOn.java:272)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:107)
at com.sun.enterprise.web.VirtualServerValve.invoke(VirtualServerValve.java:209)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:107)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:522)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:114)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:109)
at com.sun.enterprise.web.VirtualServerMappingValve.invoke(VirtualServerMappingValve.java:166)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:107)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:522)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:936)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:165)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:683)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:604)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:542)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:647)
at java.lang.Thread.run(Thread.java:534)
|#]No. You need not have to do this. Creator should automatically do this for you.
BTW, are you using the DataDirect JDBC jar files that comes bundle with Creator?
The following exception tells me, this could be becuase the JDBC driver your using is not JDBC 3.0 compliant. The error occurs when a "PreparedStatement" is created and the driver is returning null at that point.
- Winston
Maybe you are looking for
-
Find and replace characters in file names
I need to transfer much of my user folder (home) to a non-mac computer. My problem is that I have become too used to the generous file name allowances on the Mac. Many of my files have characters such as "*" "!" "?" and "|". I know these are problems
-
Pantone swatch palette not persistent
Hello all, I'm posting this in the hopes that someone else searching for the problem might find my post to lead them to the solution. I recently installed Illus CS4 on my new mac (yay!) I'm slowly working through all the new features - and new glitch
-
ITunes Only Runs with Anti Virus disabled
I had the same problem a lot of people are having when upgrading to the latest iTunes. I have reinstalled QT and iTunes separately and have finally gotten it to run. My problem now is that iTunes only opens if I have Norton Internet Security disabled
-
Message no. UDM_MSG000
Hi all I am getting this message when creating dispute case through processing recivables. Error creating the dispute case Message no. UDM_MSG000 I think it may be because of incorrect record case model or sth. Thanks Nilk
-
Question about HTML files using TextEdit
First off, I wanted to ask if this is the proper place to post a question about HTML/XHTML. I couldn't really find anywhere else that seemed to fit better, but please point me in the right direction if this is not the place. Thanks. Moving on -- here