Could not download static AME rules and approval groups using FNDLOAD

Hi,
we are trying to download static AME rules in 11i , but the FNDLOAD fails to download static rules? Please help how to download static AME rules in 11i and migrate them to next instance?
Thanks
Edited by: user12559818 on Jul 4, 2012 3:24 AM

user12559818 wrote:
Hi,
It is 11.5.10 RUP7 instance...and the rule is STATIC , as I see the control file it has the condition IS_STATIC ='N', but the rule I am trying to download is a STATIC RULE. So I am not sure how to download and migrate STATIC rules and STATIC approval groups in 11i.
Please suggest.Did you see "3.AME Rules" in [ID 1168883.1]?
Thanks,
Hussein

Similar Messages

I could not download a rented movie and cannot find a way to receive a refund. Do I have to use the dispute process with my Visa provider?

When rented movies do not download properly or completely, there seems to be no method to obtain a refund. It is poor business to require the customer to use the credit card dispute process to make good on a bad purchase. This was my first and last attempt at downloading a rented movie from iTunes. I would NOT recommend the process to a friend. The site is confusing, the process takes forever, the movie did not completely download, and the company only provides a 24 hour period to correct the problem (left up totally to the customer). Thank God for Netflix! Always works and is very reliable!

There are a number of methods to contact iTunes Support when you have a problem with a purchase. You can try the 'report a problem' page to contact them : http://reportaproblem.apple.com
Or you can use this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

I have LabView but I do not have the Calibration and Configuration Palette,and I could not download it, how can I download it or if i cannot,can I work with the NI-DAQ Calibration_1200?

I have read in a tutorial for the board 1200 that I can calibrate it with the Calibration and Configuration Palette in LabVIEW, but I do not have them and I could not download it to access its libraries, so I can only download the NI-DAQ software,What's my best choice and if it is to download the palette with its libraries, how can download it with them?I'd appreciate your answers

If you wish to use your 1200 device in LabVIEW, you must download and install NI-DAQ. When you install NI-DAQ, it will ask you if you would like to install support for LabVIEW. By installing this support, you will then have access to the DAQ pallette in LabVIEW. The DAQ pallette requires that you have NI-DAQ installed.
For more information on installing and using your device, you can refer to the DAQ Quick Start Guide. You can download it from:
http://digital.ni.com/manuals.nsf/14807683e3b2dd8f8625677b006643f0/0eca53fe80911b1f862568560068295d
Regards,
Erin

In my first iPhone 5, the speaker didn't work and people could not hear me on Speaker phone when I used it. When I used the video recording it did not record sound at all only a hissing/static sound, no voice.

In my first iPhone 5, the speaker didn't work and people could not hear me on Speaker phone when I used it. When I used the video recording it did not record sound at all only a hissing/static sound, no voice. I wished for a software fix. I did a hard reset, nothing. I did a full restore to factory settings not putting my backup on and the problem persisted.
i have been provided with this info
You can find troubleshooting tips, how-to articles, and moderated
> > discussion forums on our support website:
> >
> > www.apple.com/support
> >
> > iPhone: Basic troubleshooting
> > http://support.apple.com/kb/HT1737
> >
I did every step in the link that i have been provided with (thank you), but I’m
still experiencing the same issue. My experience with Apple has been
excellent and this has been the first time I have experienced something
like this with an Apple product. I hope we can find a quick solution.
In order to get the iPhone 5 as soon as it launched (being a major fan of
Apple products!), I purchased my iPhone 5 from the UK through a friend of
mine who lives there.
My question is: can I have the faulty device replaced within Saudi by one
of the official resellers here (we have 3: STC, Mobily and Zain)? I want to
avoid the disruption, complication and expense of sending it back to the
UK.
Could you advise whether this is possible or not, and if not how should I
go about having the device replaced?
Thank you in advance for your cooperation.

Nice try! Take a hike.

Could not download free items from iTunes App and 12 Days App on iPad 3

Please refer to my screenshots below. I just could not download free items from the iTunes app and 12 Days of Christmas app on my iPad 3. I have to download them on my Mac. Any ideas? Many thanks.

How come I could not download anything today? It keeps saying my app is not available in the US store and that I must first switch to Philippine store. But I have long been using Philippines as my location. Pls help me.

How come I could not download anything today? It keeps saying my app is not available in the US store and that I must first switch to Philippine store. But I have long been using Philippines as my location. Pls help me.

Try going to the bottom of the Featured tab in the App Store app on your device and tap on your account id, tap on 'View Apple ID' on the popup and log into your account, and then select the Country/Region section and select the Philippines.

What is the problem in my account I could not download from the store, whether programs are free or non-free I hope you fix the problem or Chrho me and I repaired the problem

What is the problem in my account I could not download from the store, whether programs are free or non-free I hope you fix the problem or Chrho me and I repaired the problem
thank you...

Nobody here can fix your problem, we do not work for Apple. And I have no idea what "Chrho" means. Neither does Google.
So - exactly what happens when you try to download a program? And from where are you trying to download it?

HT1212 My iPad locked after 1 incorrect passcode entry and I tried what a senior advisor told my to do, but it could not download the info unless I entered the correct pass code, which I can not do since it does not give me the opportunity.

My iPad locked after 1 incorrect passcode entry and I tried what a senior advisor told my to do, but it could not download the info unless I entered the correct pass code, which I can not do since it does not give me the opportunity. How do I get the window to enter my pass code?

iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

When was unloading creative cloud came an announcement that Rhodesia that had an error and could not download the error code was 50 which means

when was unloading creative cloud came an announcement that Rhodesia that had an error and could not download the error code was 50 which means

Nobody can tell you anything without proper system info or other technical details.
Mylenium

Yesterday I could not download my podcasts, then I happened to download to version 5.1 and then podcasts downloaded, BUT my music had no sound ! Today, I RESET my IPOD and got music with sound, but now cannot download my podcasts anymore. What is going on

Yesterday I could not download my podcasts (they were just hanging in the download page). Then after trying many things, I updated to version 5.1 and then could get my podcast downloads. BUT then I could not get any SOUND to my music only. So I RESET my IPOD touch this morning and the music sound worked , but then could NOT get my podcast to download again ! What happened?

I figured out it was a SPECIFIC PODCAST that would not download. My other podcasts did download. Missymae

Just downloaded Yosemite on my Mac and the Yosemite update for Garage Band. Now when I open an existing Garage Band project and click on a vocal track, a message window says, "Could not find General Audio 10" and have no smart controls. Help?

Just downloaded Yosemite on my Mac and the Yosemite update for Garage Band. Now when I open an existing Garage Band project and click on a vocal track, a message window says, "Could not find General Audio 10" and have no smart controls for that track (reverb, etc.) Help?

Try this fix posted by Robinson Collins:
Re: I downloaded Garage Band 2x and the same note appears: there is no General Audio 10. Please advise. Thank you.
Try this: Go to your menu bar, select "Garageband" and then "Restore Sound Library..."
It can take awhile to download as it's a pretty big library. You might need to also select "Update Sound Library..." after the restore is done.

Software 23.1.A.0.726 "could not download" error message when I try to update

Solved!
Go to Solution.

Hi,
Finally got the notification and when I hit download (yes I have space on internal memory and connected via WiFi)...it goes to download and before the first mb starts it then says "could not download".
I thought ok let me try via PC companion and it says I have the latest software via PC companion. I check the website what the latest software update is and it says the 23.1.A.0.690.
Anyone have any advice? In all my days I've never had could not download message come up when I've tried to update my phone software.
Location:London, network:Vodafone (if that is needed)
Thanks in advance for any help.
*Edited to add I'm currently on kitkat and havent had a software update since purchasing phone when released*

I am trying to download music on to my 4th gen Ipod touch but it keeps saying that It is unable to download song/ could not download at this time. Can anyone tell me how to download my music?

I am trying to download music on to my 4th gen Ipod touch but it keeps saying that It is unable to download song/ could not download at this time. Can anyone tell me how to download my music?

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... (But can take Longer..)
Release the Buttons...

Could not download ios 5.1.1 on my ipad2?

could not download ios 5.1.1 on my ipad2?

Try temporarily disabling your firewall and antivirus software and see if that will work.

EBS 7.3 "Could not authenticate this user name and password, try again"

I have just install Sun StorEdge Enterprise Backup Software 7.3 on a new Solaris 10 (06/06) system. I have installed the following packages with no errors: SUNWebsc (Client), SUNWebsn (Storage Node), SUNWebss (Server), SUNWebsm (Man pages) and SUNWebsg (Console).
I have executed the �nsraddadmin� command for both root and administrator.
I start the web browser with http://<hostname>:9000 and the java software loads with no errors. But when I try to login for the first time with administrator/administrator, I get the follow error:
ERROR: Could not authenticate this user name and password, try again�

I think the client is not able to do a HTTP POST
to the WLS server but it can do a HTTP GET.
I dont know why.
http://manojc.com
"Ganesh" <[email protected]> wrote in message
news:3eba91bc$[email protected]..
>
Hi,
I deployed a rpc web service using WLS 7.0 SP2 in HP-UX 11 environment.When I
invoke the web service through my browser (IE 6.0) using the web servicesurl,
it brings my service method correctly. From there, if I click the invokebutton
it asks me for a network user name and password under "weblogic" realm???If I
provide the admin user credentials (which I supplied while creating mydomain)
it is not accepting that it keeps popping up this network user passwordwindow
over and over. Not sure which username/password I have to provide here tosee
the result of my service.
If I try to invoke the web service through my client (static) I am gettinga connection
refused exception. I guess either way, I am not able to access my webservice.
In the attached file, I have cut and pasted the client stack trace as wellas
the server log trace from weblogic.
Any ideas would be highly appreciated.
Thanks,
Ganesh

Could not download static AME rules and approval groups using FNDLOAD

Similar Messages

Maybe you are looking for