Could not even connect to wireless after apple up date!

Just bought an apple tv, it loaded up fine and I signed in with my ID, connected it with my iPad and computer. Perfect. Next day could not even connect to my network. When I try to it says "there was a problem connecting to the network. Check your settings and try again. (-3906) Please help as I have spent all day resetting and fiddling around with it with no luck
And if it's not solid in 14 days I'm taking it back

No promises but a system Reset cures many ills and takes but a minute to perform:
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears.
A Reset does NOT delete apps, photos, movies, music or any other data. A Reset does NOT delete any settings for email, network access, etc.
Also, you might wish to download the 4.2 User Guide. Read the suggestions on page 170 with special emphasis on the Network Reset.
http://support.apple.com/manuals/#ipad

Similar Messages

IMac 20" was running very slow (could not even scroll without the spinning beach ball of death), The computer was operating on OSX 10.5. After a lot of attempts of diagnostic attempts, have resorted to an erase and reinstall. says it will take 60 hours!

Working on my friends iMac 20" computer. It is 2.66 ghz, and was running 4mb of ram when the computer started acting up on OSX 10.5.
When I was called over the computer was so slow that I could not even scroll without getting the beach ball of death. I checked the activities moniter, and found an HP application was taking up 46% of the CPU. We attempted to go in and uninstall all of the HP applications, but the computer ended up freezing. Ended up doing a hard shut down, and decided to run disk utilities. Repaired both Permissions, and Disk. Restarted... no difference. Thought of restoring the computer to when it was working fine via Time machine in disk utility mode... failed. Finally resorted to deleting the hard drive, reinstalling Tiger, and upgrading.
After what seemed like forever for the hard drive to erease, attempted to reinstall. Ended up taking almost an hour to verify the disk, and then announced, that it would take 58+ hours to install. After leaving it for 3 hours, the number was going up, and was not installing.
I then thought the problem would be the 2nd party ram. We replaced the paired 2mb's to give 4mb's with the origional paired 1mb's providing now 2 mb's. Attempted to reinstall osx. Same problem 60+ hours after 3 hours of letting it sit.
What to do now? Is it the logic board? Could it be a faulty hard drive? Should I attempt in firewire more from another computer? Do a 7 pass erase over the hard drive? Run Disk warrior?
If anyone could give some info on why this is so blessedly slow that would be great thanks!

Decided to try and chek out the hard drive more extensively. SMART, states that it is verified. After running Diskwarrior and repairing all of the disk and the permissions, and running a hardware test, everything seemed to be running fine.
Went back to disk utilities, checked disk and permissions again, verified. SMART states it is verified.
Attemping now to install Mac OSX 10.4.7 from the original install disk. I am currently attemting the basic install, no programs, nothing. It has been over an hour, It is 44% of installing the base system Part 1, announcing 5 hours and 53 minutes.
When I did erase the hard drive yes I selected to write over zeros once. I then erased a second time from Diskwarrior.

Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email. t worked, but only for those with PC. I could not get it to work with Apple Yosemite even with reader installed . is there a way i can make it work for apple /

Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email. It worked, but only for those with PC. However, I could not get it to work with Apple loaded with Yosemite even with reader installed . Is there a way i can make it work for apple / Mac? It worked fine on a mac using Mountain Lion and reader
Thanks

LiveCycle = XFA forms.
afaik - These cannot be used in Apple OSs.
Be well...

As iMac user upgraded to Mountain Lion and lost all Legacy connection with years of Apple/Mac data storage. How can recovery since every default says "no longer supported, After years of Mac software use now it is not accessible ??????

As iMac user upgraded to Mountain Lion lost all Legacy connection with years of Apple/Mac data storage. How can recovery since every default says "no longer supported, After years of Mac software use now it is not accessible ??????

Please provide more details. What version OS X were you using?
Are you saying that Mail faIled to upgrade and you lost your old mail?
Are you asking about PowerPC applications that require Rosetta to run like AppleWorks and Microsoft Office 2004?

Could not activate my iphone 3gs after activating to ios:5, could not activate my iphone 3gs after activating to ios:5

could not activate my iphone 3gs after activating to ios:5, could not activate my iphone 3gs after activating to ios:5
its workin with previous version of 3 os n after updatin,its showing that cannot connect to apple server n try connceting to i tunes,after doin so its showin that no sim card inserted.........i have read the similar problem in the discussions but in end of discussion the solution have been removed.............
and i dont have a proper apple store or service in coastal india near by...............
plz do a needfull help as i have only option in contacting you
plz look forward my request

touch me wrote:
it says ICCID: unknown
Not a good sign. Try forcing the phone into recovery mode & restoring it. If this fails, make an appointment at an Apple store:
Turn your phone off. Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.

"The iTunes server could not be connected..." How do I install the new version of itunes now?

Every time I try to check for updates I get this message across my screen.
"The certificate for this server is invalid. You might be connecting to a server that is pretending to be “ax.itunes.apple.com”, which could put your confidential information at risk. Would you like to connect to the server anyway?"
After which it informs me the user could not be connected.
I need to update so I can sync my phone that just got replaced. Is there any way to do this?

Refer to this article:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/TS1814

HT1212 itunes could not be connected to ipad because it is locked with a passcode, i must enter a passcode on the ipad before it can be used with itunes but all i see is "iPad is disabled connect to itunes" I have a passcode but nothing shows on the scree

itunes could not be connected to ipad because it is locked with a passcode, i must enter a passcode on the ipad before it can be used with itunes but all i see is "iPad is disabled connect to itunes" I have a passcode but nothing shows on the screen

iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Itouch stuck on recovery mode, could not even switch off

Hi, I just bought my itouch today and i just finished charging it, when I connected it to my computer, it said that I should update my software and when I did, an error message popped up and now its stuck on recovery mode, I could not even switch it off.
any ideas what should i do?

Apple should be ashamed of itself. I just spent several hours fixing what that bogus "upgrade" caused to happen to my 1G.
For the most part I like the unit for what it does with music but what functionality I wanted was to be able to download a movie and not have to clog up my HDD.
Honestly this functionality should have been included free of charge. So I figure I'll just keep it as is and then find out that I can't even install the simplest of free applications unless it involves lining their pockes with more money. Of the 2 apps that did the same thing the one that was paid had the option to upgrade while the free one tagged me with having to update the OS. Anyways thinking that maybe it's gonna be worth it I paid the 5 bucks for the upgrade.
IT DOESN'T EVEN WORK!!!!!!!!!!
Panic, reasearch and hours later I am finally syncing my unit with a horribly outdated OS. Thanks for the apple experience. I feel so a$$ raped right now.

Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.

Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.

Hello Sue,
I have an iPad 3, iPad Mini and iPhone 5S and they are all sluggish on capitalisation using shift keys. I hope that Apple will solve the problem because it is driving me crazy.
I find using a Microsoft Surface and Windows 8 phone, which I also have, work as well as all the ios devices before the ios 7 upgrade.
It has something to do with the length of time that you need to hold the shift key down. The shift key needs to be held longer than the letter key for the capitalisation to work. For some reason, this is a major change in the way we have learnt to touch type on computers. I am having to relearn how to type!
Michael

Error: Device 768 (vbd) could not be connected. /etc/xen/scripts/block fail

Hello OTN,
After converting/exporting machines from VMware and importing them into OVM i am receiving errors on some of the machines when powering on.
Here is the complete error message:
Start - /OVS/running_pool/dirkwin
PowerOn Failed : Result - failed:<Exception: return=>failed:<Exception: ['xm', 'create', '/var/ovs/mount/483E943AE684484EAD7255356E8F24CC/running_pool/machinename/vm.cfg'] => Error: Device 768 (vbd) could not be connected. /etc/xen/scripts/block failed; error detected.
>
StackTrace:
File "/opt/ovs-agent-2.3/OVSXXenVM.py", line 57, in xen_start_vm
run_cmd(args=cmd)
File "/opt/ovs-agent-2.3/OVSCommons.py", line 85, in run_cmd
raise Exception('%s => %s' % (cmdlist, p.childerr.read()))
>
StackTrace:
File "/opt/ovs-agent-2.3/OVSSiteVM.py", line 131, in start_vm
raise e
Searching for this error turned up different solutions but none of them worked.
One mentioned OVM not being able to handle spaces in vm names but this is not a working solution as most of the machines are just regular names without spaces or special characters.
Also interesting, sometimes this error does not turn up when powering on BUT the machine just powers off again and returns to its turned off state. Next power on the error returns.
OS types vary from S10, Win XP and RedHat so a possible connection to the error being the host OS is not there.
Harddrive types are set to auto. The vm.cfg's of functioning machines do not differ from non functioning machines besides the actual vm name in the vm.cfg
Any idea to this error or how to solve it ?
Thanks
-Stephan

Hello Sebastian,
This is one of the vm.cfg which will abort due to the above mentioned error:
acpi = 1
apic = 1
builder = 'hvm'
device_model = '/usr/lib/xen/bin/qemu-dm'
disk = ['file:/var/ovs/mount/483E943AE684484EAD7255356E8F24CC/running_pool/vmname/vmname.img,hda,w',
',hdc:cdrom,r',
kernel = '/usr/lib/xen/boot/hvmloader'
memory = '2048'
name = 'vmname'
on_crash = 'restart'
on_reboot = 'restart'
pae = 1
serial = 'pty'
timer_mode = '0'
usbdevice = 'tablet'
uuid = 'a2a62bcb-f9ab-4ec3-8574-7415985cdf0a'
vcpus = 1
vif = ['bridge=xenbr0,mac=xx:xx:xx:xx:xx:xx,type=ioemu']
vif_other_config = []
vnc = 1
vncconsole = 1
vnclisten = '0.0.0.0'
vncpasswd = 'xx'
vncunused = 1
The xend.log also turned up nothing concerning this error. no messages were written into it. No other log has been created by xen in the /var/log/xen directory concerning an issue with the current machine.
Thanks for your help !
-Stephan
ps:mac address + pw is commented out
Edited by: Stephan Becker on Aug 5, 2010 7:11 AM

Could not open connection to the SERVER

Below is the error message that i have encountered.
I am using Java version 7.
Also tried installing the previous versions as well.
But when i check the connection using the ODBS data source administrator i was able to connect the server.
!ENTRY com.sap.ndb.studio.navigator 4 1 2014-06-24 00:25:17.142
!MESSAGE HDB skvk.vm.cld.sr 00 (SYSTEM) Error while refreshing system
!SUBENTRY 1 com.sap.ndb.studio.navigator 4 0 2014-06-24 00:25:17.142
!MESSAGE SAPControl request failed
!STACK 0
com.sap.ndb.studio.sapcontrol.SAPControlException: SAPControl request failed
     at com.sap.ndb.studio.sapcontrol.operations.SAPControlOperation.execute(SAPControlOperation.java:118)
     at com.sap.ndb.studio.sapcontrol.SAPControl.getInstanceProperties(SAPControl.java:507)
     at com.sap.ndb.studio.navigator.operations.SAPSystemObjectUpdate.executeTrySAPControl(SAPSystemObjectUpdate.java:147)
     at com.sap.ndb.studio.navigator.operations.SAPSystemObjectUpdate.execute(SAPSystemObjectUpdate.java:79)
     at com.sap.ndb.studio.navigator.operations.UpdateSAPSystemOperation.execute(UpdateSAPSystemOperation.java:73)
     at com.sap.ndb.studio.datamodel.controler.DataModelOperation.execute(DataModelOperation.java:70)
     at com.sap.ndb.studio.datamodel.controler.DataModelOperationQueue$DataModelOperationThread.run(DataModelOperationQueue.java:99)
Caused by: com.sun.xml.internal.messaging.saaj.SOAPExceptionImpl: com.sun.xml.internal.messaging.saaj.SOAPExceptionImpl: Message send failed
     at com.sun.xml.internal.messaging.saaj.client.p2p.HttpSOAPConnection.call(Unknown Source)
     at com.sap.ndb.studio.sapcontrol.operations.SAPControlOperation.execute(SAPControlOperation.java:94)
     ... 6 more
Caused by: com.sun.xml.internal.messaging.saaj.SOAPExceptionImpl: Message send failed
     at com.sun.xml.internal.messaging.saaj.client.p2p.HttpSOAPConnection.post(Unknown Source)
     ... 8 more
Caused by: java.net.SocketException: Connection reset
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
     at java.lang.reflect.Constructor.newInstance(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection$6.run(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection$6.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.net.www.protocol.http.HttpURLConnection.getChainedException(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
     at java.net.HttpURLConnection.getResponseCode(Unknown Source)
     ... 9 more
Caused by: java.net.SocketException: Connection reset
     at java.net.SocketInputStream.read(Unknown Source)
     at java.net.SocketInputStream.read(Unknown Source)
     at java.io.BufferedInputStream.fill(Unknown Source)
     at java.io.BufferedInputStream.read1(Unknown Source)
     at java.io.BufferedInputStream.read(Unknown Source)
     at sun.net.www.http.HttpClient.parseHTTPHeader(Unknown Source)
     at sun.net.www.http.HttpClient.parseHTTP(Unknown Source)
     at sun.net.www.http.HttpClient.parseHTTP(Unknown Source)
     ... 11 more
!SUBENTRY 1 com.sap.ndb.studio.navigator 4 4 2014-06-24 00:25:17.143
!MESSAGE Database connection is not available. See error log for details.
!STACK 0
com.sap.ndb.studio.jdbc.JDBCConnectionStatus: Database connection is not available. See error log for details.
     at com.sap.ndb.studio.jdbc.JDBCPlugin.createConnection(JDBCPlugin.java:253)
     at com.sap.ndb.studio.navigator.operations.SAPSystemObjectUpdate.executeTryJDBC(SAPSystemObjectUpdate.java:268)
     at com.sap.ndb.studio.navigator.operations.SAPSystemObjectUpdate.execute(SAPSystemObjectUpdate.java:96)
     at com.sap.ndb.studio.navigator.operations.UpdateSAPSystemOperation.execute(UpdateSAPSystemOperation.java:73)
     at com.sap.ndb.studio.datamodel.controler.DataModelOperation.execute(DataModelOperation.java:70)
     at com.sap.ndb.studio.datamodel.controler.DataModelOperationQueue$DataModelOperationThread.run(DataModelOperationQueue.java:99)
Caused by: com.sap.db.jdbc.exceptions.jdbc40.SQLNonTransientConnectionException: Data receive failed .
     at com.sap.db.jdbc.exceptions.jdbc40.SQLNonTransientConnectionException.createException(SQLNonTransientConnectionException.java:40)
     at com.sap.db.jdbc.exceptions.SQLExceptionSapDB.createException(SQLExceptionSapDB.java:241)
     at com.sap.db.jdbc.exceptions.SQLExceptionSapDB.createException(SQLExceptionSapDB.java:203)
     at com.sap.db.jdbc.exceptions.SQLExceptionSapDB.generateSQLException(SQLExceptionSapDB.java:155)
     at com.sap.db.jdbc.exceptions.ConnectionException.createException(ConnectionException.java:22)
     at com.sap.db.jdbc.ConnectionSapDB.tryReconnect(ConnectionSapDB.java:1631)
     at com.sap.db.jdbc.ConnectionSapDB.execute(ConnectionSapDB.java:1131)
     at com.sap.db.jdbc.CallableStatementSapDB.sendCommand(CallableStatementSapDB.java:1964)
     at com.sap.db.jdbc.StatementSapDB.sendSQL(StatementSapDB.java:978)
     at com.sap.db.jdbc.CallableStatementSapDB.doParse(CallableStatementSapDB.java:256)
     at com.sap.db.jdbc.CallableStatementSapDB.constructor(CallableStatementSapDB.java:215)
     at com.sap.db.jdbc.CallableStatementSapDB.(CallableStatementSapDBFinalize.java:31)
     at com.sap.db.jdbc.ConnectionSapDB.prepareStatement(ConnectionSapDB.java:1369)
     at com.sap.db.jdbc.trace.log.Connection.prepareStatement(Connection.java:1025)
     at com.sap.db.jdbc.trace.Connection.prepareStatement(Connection.java:413)
     at com.sap.ndb.studio.jdbc.JDBCConnection.initialize(JDBCConnection.java:235)
     at com.sap.ndb.studio.jdbc.JDBCPlugin.createConnection(JDBCPlugin.java:236)
     ... 5 more
!ENTRY com.sap.ndb.studio.jdbc 4 4 2014-06-24 00:26:07.869
!MESSAGE Connection on HDB:SKVK.VM.CLD.SR:00:SYSTEM is forced to close. (csns.backup.BackupConnectionHandler$1.call(BackupConnectionHandler.java:116);csns.backup.BackupConnectionHandler$1.call(BackupConnectionHandler.java:1);)
!ENTRY com.sap.ndb.studio.jdbc 4 4 2014-06-24 00:26:07.871
!MESSAGE Connection on HDB:SKVK.VM.CLD.SR:00:SYSTEM is forced to close. (csns.catalog.internal.Catalog.isHasPrivilegesForSchemasAvailable(Catalog.java:143);csns.catalog.internal.Catalog.fetchCatalogObjects(Catalog.java:73);csns.catalog.internal.CatalogFolder.fetchChildren(CatalogFolder.java:175);csns.catalog.CatalogWorkbenchAdapter$1.run(CatalogWorkbenchAdapter.java:98);org.eclipse.core.internal.jobs.Worker.run(Worker.java:53);)
!ENTRY com.sap.ndb.studio.jdbc 4 4 2014-06-24 00:26:07.873
!MESSAGE Connection on HDB:SKVK.VM.CLD.SR:00:SYSTEM is forced to close. (csns.catalog.command.handlers.CatalogRefresh.execute(CatalogRefresh.java:36);org.eclipse.ui.internal.handlers.HandlerProxy.execute(HandlerProxy.java:290);org.eclipse.ui.internal.handlers.E4HandlerProxy.execute(E4HandlerProxy.java:90);org.eclipse.e4.core.internal.di.MethodRequestor.execute(MethodRequestor.java:56);org.eclipse.e4.core.internal.di.InjectorImpl.invokeUsingClass(InjectorImpl.java:243);org.eclipse.e4.core.internal.di.InjectorImpl.invoke(InjectorImpl.java:224);org.eclipse.e4.core.contexts.Context)
!ENTRY com.sap.ndb.studio.jdbc 4 4 2014-06-24 00:26:07.875
!MESSAGE Connection on HDB:SKVK.VM.CLD.SR:00:SYSTEM is forced to close. (csns.catalog.internal.Catalog.isHasPrivilegesForSchemasAvailable(Catalog.java:143);csns.catalog.internal.Catalog.fetchCatalogObjects(Catalog.java:73);csns.catalog.internal.CatalogFolder.fetchChildren(CatalogFolder.java:175);csns.catalog.CatalogWorkbenchAdapter$1.run(CatalogWorkbenchAdapter.java:98);org.eclipse.core.internal.jobs.Worker.run(Worker.java:53);)
!ENTRY com.sap.ndb.studio.jdbc 4 4 2014-06-24 00:26:07.894
!MESSAGE Connection on HDB:SKVK.VM.CLD.SR:00:SYSTEM is forced to close. (csns.modeler.base.NavigatorRepositoryInput.getConnection(NavigatorRepositoryInput.java:28);csns.sdk.repository.provider.newdbrepository.NewDBRepositoryProxyFactory.getRepositoryProxy(NewDBRepositoryProxyFactory.java:21);csns.sdk.repository.provider.newdbrepository.impl.NewDBRepositoryProvider.getProxy(NewDBRepositoryProvider.java:197);csns.sdk.repository.provider.newdbrepository.impl.NewDBRepositoryProvider.checkRepositoryAccessAuthorization(NewDBRepositoryProvider.java:214);csns.sdk.repository.newdbreposi)
!ENTRY com.sap.ndb.studio.jdbc 4 4 2014-06-24 00:26:07.896
!MESSAGE Connection on HDB:SKVK.VM.CLD.SR:00:SYSTEM is forced to close. (csns.catalog.internal.Catalog.isHasPrivilegesForSchemasAvailable(Catalog.java:143);csns.catalog.internal.Catalog.fetchCatalogObjects(Catalog.java:73);csns.catalog.internal.CatalogFolder.fetchChildren(CatalogFolder.java:175);csns.catalog.CatalogWorkbenchAdapter$1.run(CatalogWorkbenchAdapter.java:98);org.eclipse.core.internal.jobs.Worker.run(Worker.java:53);)
!ENTRY com.sap.ndb.studio.jdbc 4 4 2014-06-24 00:26:07.899
!MESSAGE Connection on HDB:SKVK.VM.CLD.SR:00:SYSTEM is forced to close. (csns.catalog.internal.Catalog.isHasPrivilegesForSchemasAvailable(Catalog.java:143);csns.catalog.internal.Catalog.fetchCatalogObjects(Catalog.java:73);csns.catalog.internal.CatalogFolder.fetchChildren(CatalogFolder.java:175);csns.catalog.CatalogWorkbenchAdapter$1.run(CatalogWorkbenchAdapter.java:98);org.eclipse.core.internal.jobs.Worker.run(Worker.java:53);)
!ENTRY com.sap.ndb.studio.jdbc 4 4 2014-06-24 00:26:07.901
!MESSAGE Connection on HDB:SKVK.VM.CLD.SR:00:SYSTEM is forced to close. (csns.navigator.operations.SAPSystemObjectUpdate.executeTryJDBC(SAPSystemObjectUpdate.java:268);csns.navigator.operations.SAPSystemObjectUpdate.execute(SAPSystemObjectUpdate.java:96);csns.navigator.operations.UpdateSAPSystemOperation.execute(UpdateSAPSystemOperation.java:73);csns.datamodel.controler.DataModelOperation.execute(DataModelOperation.java:70);csns.datamodel.controler.DataModelOperationQueue$DataModelOperationThread.run(DataModelOperationQueue.java:99);)
!ENTRY com.sap.ndb.studio.backup 4 4 2014-06-24 00:27:01.078
!MESSAGE Could not open connection to 'HDB skvk.vm.cld.sr 00'
!STACK 0
java.util.concurrent.TimeoutException
     at java.util.concurrent.FutureTask.get(Unknown Source)
     at com.sap.ndb.studio.backup.BackupConnectionHandler.openConnection(BackupConnectionHandler.java:122)
     at com.sap.ndb.studio.backup.BackupConnectionHandler.getConnection(BackupConnectionHandler.java:88)
     at com.sap.ndb.studio.backup.BackupWorkbenchAdapter$2.call(BackupWorkbenchAdapter.java:151)
     at com.sap.ndb.studio.backup.BackupWorkbenchAdapter$2.call(BackupWorkbenchAdapter.java:1)
     at java.util.concurrent.FutureTask.run(Unknown Source)
     at java.util.concurrent.ThreadPoolExecutor.runWorker(Unknown Source)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
!ENTRY com.sap.ndb.studio.navigator 4 1 2014-06-24 00:27:31.615
!MESSAGE HDB skvk.vm.cld.sr 00 (SYSTEM) Error while refreshing system
!SUBENTRY 1 com.sap.ndb.studio.navigator 4 0 2014-06-24 00:27:31.615
!MESSAGE SAPControl request failed
!STACK 0
com.sap.ndb.studio.sapcontrol.SAPControlException: SAPControl request failed
     at com.sap.ndb.studio.sapcontrol.operations.SAPControlOperation.execute(SAPControlOperation.java:118)
     at com.sap.ndb.studio.sapcontrol.SAPControl.getInstanceProperties(SAPControl.java:507)
     at com.sap.ndb.studio.navigator.operations.SAPSystemObjectUpdate.executeTrySAPControl(SAPSystemObjectUpdate.java:147)
     at com.sap.ndb.studio.navigator.operations.SAPSystemObjectUpdate.execute(SAPSystemObjectUpdate.java:79)
     at com.sap.ndb.studio.navigator.operations.UpdateSAPSystemOperation.execute(UpdateSAPSystemOperation.java:73)
     at com.sap.ndb.studio.datamodel.controler.DataModelOperation.execute(DataModelOperation.java:70)
     at com.sap.ndb.studio.datamodel.controler.DataModelOperationQueue$DataModelOperationThread.run(DataModelOperationQueue.java:99)
Caused by: com.sun.xml.internal.messaging.saaj.SOAPExceptionImpl: com.sun.xml.internal.messaging.saaj.SOAPExceptionImpl: Message send failed
     at com.sun.xml.internal.messaging.saaj.client.p2p.HttpSOAPConnection.call(Unknown Source)
     at com.sap.ndb.studio.sapcontrol.operations.SAPControlOperation.execute(SAPControlOperation.java:94)
     ... 6 more
Caused by: com.sun.xml.internal.messaging.saaj.SOAPExceptionImpl: Message send failed
     at com.sun.xml.internal.messaging.saaj.client.p2p.HttpSOAPConnection.post(Unknown Source)
     ... 8 more
Caused by: java.net.SocketException: Connection reset
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
     at java.lang.reflect.Constructor.newInstance(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection$6.run(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection$6.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.net.www.protocol.http.HttpURLConnection.getChainedException(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
     at java.net.HttpURLConnection.getResponseCode(Unknown Source)
     ... 9 more
Caused by: java.net.SocketException: Connection reset
     at java.net.SocketInputStream.read(Unknown Source)
     at java.net.SocketInputStream.read(Unknown Source)
     at java.io.BufferedInputStream.fill(Unknown Source)
     at java.io.BufferedInputStream.read1(Unknown Source)
     at java.io.BufferedInputStream.read(Unknown Source)
     at sun.net.www.http.HttpClient.parseHTTPHeader(Unknown Source)
     at sun.net.www.http.HttpClient.parseHTTP(Unknown Source)
     at sun.net.www.http.HttpClient.parseHTTP(Unknown Source)
     ... 11 more
!SUBENTRY 1 com.sap.ndb.studio.navigator 4 4 2014-06-24 00:27:31.616
!MESSAGE Database connection is not available. See error log for details.
!STACK 0
com.sap.ndb.studio.jdbc.JDBCConnectionStatus: Database connection is not available. See error log for details.
     at com.sap.ndb.studio.jdbc.JDBCPlugin.createConnection(JDBCPlugin.java:253)
     at com.sap.ndb.studio.navigator.operations.SAPSystemObjectUpdate.executeTryJDBC(SAPSystemObjectUpdate.java:268)
     at com.sap.ndb.studio.navigator.operations.SAPSystemObjectUpdate.execute(SAPSystemObjectUpdate.java:96)
     at com.sap.ndb.studio.navigator.operations.UpdateSAPSystemOperation.execute(UpdateSAPSystemOperation.java:73)
     at com.sap.ndb.studio.datamodel.controler.DataModelOperation.execute(DataModelOperation.java:70)
     at com.sap.ndb.studio.datamodel.controler.DataModelOperationQueue$DataModelOperationThread.run(DataModelOperationQueue.java:99)
Caused by: com.sap.db.jdbc.exceptions.jdbc40.SQLNonTransientConnectionException: Data receive failed .
     at com.sap.db.jdbc.exceptions.jdbc40.SQLNonTransientConnectionException.createException(SQLNonTransientConnectionException.java:40)
     at com.sap.db.jdbc.exceptions.SQLExceptionSapDB.createException(SQLExceptionSapDB.java:241)
     at com.sap.db.jdbc.exceptions.SQLExceptionSapDB.createException(SQLExceptionSapDB.java:203)
     at com.sap.db.jdbc.exceptions.SQLExceptionSapDB.generateSQLException(SQLExceptionSapDB.java:155)
     at com.sap.db.jdbc.exceptions.ConnectionException.createException(ConnectionException.java:22)
     at com.sap.db.jdbc.ConnectionSapDB.tryReconnect(ConnectionSapDB.java:1631)
     at com.sap.db.jdbc.ConnectionSapDB.execute(ConnectionSapDB.java:1131)
     at com.sap.db.jdbc.CallableStatementSapDB.sendCommand(CallableStatementSapDB.java:1964)
     at com.sap.db.jdbc.StatementSapDB.sendSQL(StatementSapDB.java:978)
     at com.sap.db.jdbc.CallableStatementSapDB.doParse(CallableStatementSapDB.java:256)
     at com.sap.db.jdbc.CallableStatementSapDB.constructor(CallableStatementSapDB.java:215)
     at com.sap.db.jdbc.CallableStatementSapDB.(CallableStatementSapDBFinalize.java:31)
     at com.sap.db.jdbc.ConnectionSapDB.prepareStatement(ConnectionSapDB.java:1369)
     at com.sap.db.jdbc.trace.log.Connection.prepareStatement(Connection.java:1025)
     at com.sap.db.jdbc.trace.Connection.prepareStatement(Connection.java:413)
     at com.sap.ndb.studio.jdbc.JDBCConnection.initialize(JDBCConnection.java:235)
     at com.sap.ndb.studio.jdbc.JDBCPlugin.createConnection(JDBCPlugin.java:236)
     ... 5 more
!ENTRY com.sap.ndb.studio.jdbc 4 4 2014-06-24 00:38:11.748
!MESSAGE Connection on HDB:SKVK.VM.CLD.SR:00:SYSTEM is forced to close. (csns.navigator.commands.OpenSAPSystemHandler$1$1.call(OpenSAPSystemHandler.java:238);csns.navigator.commands.OpenSAPSystemHandler$1$1.call(OpenSAPSystemHandler.java:1);)
!ENTRY com.sap.ndb.studio.jdbc 4 4 2014-06-24 00:38:11.749
!MESSAGE Connection on HDB:SKVK.VM.CLD.SR:00:SYSTEM is forced to close. (csns.backup.BackupConnectionHandler$1.call(BackupConnectionHandler.java:116);csns.backup.BackupConnectionHandler$1.call(BackupConnectionHandler.java:1);)
!ENTRY com.sap.ndb.studio.jdbc 4 4 2014-06-24 00:38:11.750
!MESSAGE Connection on HDB:SKVK.VM.CLD.SR:00:SYSTEM is forced to close. (csns.navigator.operations.SAPSystemObjectUpdate.executeTryJDBC(SAPSystemObjectUpdate.java:268);csns.navigator.operations.SAPSystemObjectUpdate.execute(SAPSystemObjectUpdate.java:96);csns.navigator.operations.UpdateSAPSystemOperation.execute(UpdateSAPSystemOperation.java:73);csns.datamodel.controler.DataModelOperation.execute(DataModelOperation.java:70);csns.datamodel.controler.DataModelOperationQueue$DataModelOperationThread.run(DataModelOperationQueue.java:99);)
!ENTRY com.sap.ndb.studio.jdbc 4 4 2014-06-24 00:38:15.378
!MESSAGE Connection on HDB:BRSL.VM.CLD.SR:00:SYSTEM is forced to close. (csns.backup.BackupConnectionHandler$1.call(BackupConnectionHandler.java:116);csns.backup.BackupConnectionHandler$1.call(BackupConnectionHandler.java:1);)
!ENTRY com.sap.ndb.studio.jdbc 4 4 2014-06-24 00:38:15.384
!MESSAGE Connection on HDB:BRSL.VM.CLD.SR:00:SYSTEM is forced to close. (csns.navigator.operations.SAPSystemObjectUpdate.executeTryJDBC(SAPSystemObjectUpdate.java:268);csns.navigator.operations.SAPSystemObjectUpdate.execute(SAPSystemObjectUpdate.java:96);csns.navigator.operations.UpdateSAPSystemOperation.execute(UpdateSAPSystemOperation.java:73);csns.datamodel.controler.DataModelOperationJob.run(DataModelOperationJob.java:70);org.eclipse.core.internal.jobs.Worker.run(Worker.java:53);)
!ENTRY com.sap.ndb.studio.backup 4 4 2014-06-24 00:39:08.472
!MESSAGE Could not open connection to 'HDB skvk.vm.cld.sr 00'
!STACK 0
java.util.concurrent.TimeoutException
     at java.util.concurrent.FutureTask.get(Unknown Source)
     at com.sap.ndb.studio.backup.BackupConnectionHandler.openConnection(BackupConnectionHandler.java:122)
     at com.sap.ndb.studio.backup.BackupConnectionHandler.getConnection(BackupConnectionHandler.java:88)
     at com.sap.ndb.studio.backup.BackupWorkbenchAdapter$2.call(BackupWorkbenchAdapter.java:151)
     at com.sap.ndb.studio.backup.BackupWorkbenchAdapter$2.call(BackupWorkbenchAdapter.java:1)
     at java.util.concurrent.FutureTask.run(Unknown Source)
     at java.util.concurrent.ThreadPoolExecutor.runWorker(Unknown Source)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
!ENTRY com.sap.ndb.studio.navigator 4 1 2014-06-24 00:39:38.422
!MESSAGE HDB skvk.vm.cld.sr 00 (SYSTEM) Error while refreshing system
!SUBENTRY 1 com.sap.ndb.studio.navigator 4 0 2014-06-24 00:39:38.422
!MESSAGE SAPControl request failed
!STACK 0
com.sap.ndb.studio.sapcontrol.SAPControlException: SAPControl request failed
     at com.sap.ndb.studio.sapcontrol.operations.SAPControlOperation.execute(SAPControlOperation.java:118)
     at com.sap.ndb.studio.sapcontrol.SAPControl.getInstanceProperties(SAPControl.java:507)
     at com.sap.ndb.studio.navigator.operations.SAPSystemObjectUpdate.executeTrySAPControl(SAPSystemObjectUpdate.java:147)
     at com.sap.ndb.studio.navigator.operations.SAPSystemObjectUpdate.execute(SAPSystemObjectUpdate.java:79)
     at com.sap.ndb.studio.navigator.operations.UpdateSAPSystemOperation.execute(UpdateSAPSystemOperation.java:73)
     at com.sap.ndb.studio.datamodel.controler.DataModelOperation.execute(DataModelOperation.java:70)
     at com.sap.ndb.studio.datamodel.controler.DataModelOperationQueue$DataModelOperationThread.run(DataModelOperationQueue.java:99)
Caused by: com.sun.xml.internal.messaging.saaj.SOAPExceptionImpl: com.sun.xml.internal.messaging.saaj.SOAPExceptionImpl: Message send failed
     at com.sun.xml.internal.messaging.saaj.client.p2p.HttpSOAPConnection.call(Unknown Source)
     at com.sap.ndb.studio.sapcontrol.operations.SAPControlOperation.execute(SAPControlOperation.java:94)
     ... 6 more
Caused by: com.sun.xml.internal.messaging.saaj.SOAPExceptionImpl: Message send failed
     at com.sun.xml.internal.messaging.saaj.client.p2p.HttpSOAPConnection.post(Unknown Source)
     ... 8 more
Caused by: java.net.SocketException: Connection reset
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
     at java.lang.reflect.Constructor.newInstance(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection$6.run(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection$6.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.net.www.protocol.http.HttpURLConnection.getChainedException(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
     at java.net.HttpURLConnection.getResponseCode(Unknown Source)
     ... 9 more
Caused by: java.net.SocketException: Connection reset
     at java.net.SocketInputStream.read(Unknown Source)
     at java.net.SocketInputStream.read(Unknown Source)
     at java.io.BufferedInputStream.fill(Unknown Source)
     at java.io.BufferedInputStream.read1(Unknown Source)
     at java.io.BufferedInputStream.read(Unknown Source)
     at sun.net.www.http.HttpClient.parseHTTPHeader(Unknown Source)
     at sun.net.www.http.HttpClient.parseHTTP(Unknown Source)
     at sun.net.www.http.HttpClient.parseHTTP(Unknown Source)
     ... 11 more
!SUBENTRY 1 com.sap.ndb.studio.navigator 4 4 2014-06-24 00:39:38.422
!MESSAGE Database connection is not available. See error log for details.
!STACK 0
com.sap.ndb.studio.jdbc.JDBCConnectionStatus: Database connection is not available. See error log for details.
     at com.sap.ndb.studio.jdbc.JDBCPlugin.createConnection(JDBCPlugin.java:253)
     at com.sap.ndb.studio.navigator.operations.SAPSystemObjectUpdate.executeTryJDBC(SAPSystemObjectUpdate.java:268)
     at com.sap.ndb.studio.navigator.operations.SAPSystemObjectUpdate.execute(SAPSystemObjectUpdate.java:96)
     at com.sap.ndb.studio.navigator.operations.UpdateSAPSystemOperation.execute(UpdateSAPSystemOperation.java:73)
     at com.sap.ndb.studio.datamodel.controler.DataModelOperation.execute(DataModelOperation.java:70)
     at com.sap.ndb.studio.datamodel.controler.DataModelOperationQueue$DataModelOperationThread.run(DataModelOperationQueue.java:99)
Caused by: com.sap.db.jdbc.exceptions.jdbc40.SQLNonTransientConnectionException: Data receive failed .
     at com.sap.db.jdbc.exceptions.jdbc40.SQLNonTransientConnectionException.createException(SQLNonTransientConnectionException.java:40)
     at com.sap.db.jdbc.exceptions.SQLExceptionSapDB.createException(SQLExceptionSapDB.java:241)
     at com.sap.db.jdbc.exceptions.SQLExceptionSapDB.createException(SQLExceptionSapDB.java:203)
     at com.sap.db.jdbc.exceptions.SQLExceptionSapDB.generateSQLException(SQLExceptionSapDB.java:155)
     at com.sap.db.jdbc.exceptions.ConnectionException.createException(ConnectionException.java:22)
     at com.sap.db.jdbc.ConnectionSapDB.tryReconnect(ConnectionSapDB.java:1631)
     at com.sap.db.jdbc.ConnectionSapDB.execute(ConnectionSapDB.java:1131)
     at com.sap.db.jdbc.CallableStatementSapDB.sendCommand(CallableStatementSapDB.java:1964)
     at com.sap.db.jdbc.StatementSapDB.sendSQL(StatementSapDB.java:978)
     at com.sap.db.jdbc.CallableStatementSapDB.doParse(CallableStatementSapDB.java:256)
     at com.sap.db.jdbc.CallableStatementSapDB.constructor(CallableStatementSapDB.java:215)
     at com.sap.db.jdbc.CallableStatementSapDB.(CallableStatementSapDBFinalize.java:31)
     at com.sap.db.jdbc.ConnectionSapDB.prepareStatement(ConnectionSapDB.java:1369)
     at com.sap.db.jdbc.trace.log.Connection.prepareStatement(Connection.java:1025)
     at com.sap.db.jdbc.trace.Connection.prepareStatement(Connection.java:413)
     at com.sap.ndb.studio.jdbc.JDBCConnection.initialize(JDBCConnection.java:235)
     at com.sap.ndb.studio.jdbc.JDBCPlugin.createConnection(JDBCPlugin.java:236)
     ... 5 more

No guarantee but try tapping Settings / Safari. Clear the History, Cookies, and Cache. Restart the iPad.
And try here..   Apple - Support - iPad - Wi-Fi

DBlink and Tns could not resolve connect identifier specified

We are encountering a strange issue with DB link(may be new to me)
We have Oracle 9.2.0.8 and 10.2.0.3 in Solrais 10
We are accesing both servers from the 10g
We are able to connect to both the database through SQLplus
We created a DBLink in oracle 9i to access 10g
SQL:
create public database link PRD connect to admin identified by ***** using 'PRD';
Database link is created
We have an entry in the TNSNAMES.ora for PRD which has a description connecting to 10g database.
now we are issuin
select * from table@PRD
The error message is
ora 12514-TNS could not resolve connect identifier sepcified
But i am ablt to connect to both the databases from SQLPLUS but not by DBlink
My global_names parmaeter is TRUE:
Global_name=PRD without the domain name..

Tried and failed......)
Nicolas
Does the DBlink takes the TNSentry in the host server
even when we run from the clinet?
I heard somewhere earlierDB link makes the database behave as a client.
If you are on the other side of Jupiter and you connect to the database, should the database look in the TNSNAMES.ORA file on your computer to resolve the entry? Should it send a message back via SQLNet to your PC to ask it to look up what the DB Link means?
Bottom line: The TNSNAMES.ORA in the ORACLE_HOME/networking/admin of the database install is used by all the client products running out of the ORACLE_HOME/bin - including the database when the database behaves as a client.

I made resetting and then the ipad could not be working, its just the apple on the screen

I made resetting and then the ipad could not be working, its just the apple on the screen
Thank you in advance for your help
Regards

What type of reset were you doing, a soft reset via the home and sleep buttons, or a reset back to factory defaults ? Have you tried another soft reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

What's wrong with this MySQL connection? "Could not create connection to database server"

I'm able to connect to other MySQL databases but this one particular remote MySQL connection isn't working and I cannot figure it out. It probably has something to do with the remote server, not CF, but I thought I'd post it here if anyone had an idea. The MySQL account has full priviledges.
Here is the message when I try to validate the data source:
Connection verification failed for data source: test
com.mysql.jdbc.exceptions.jdbc4.MySQLNonTransientConnectionException: Could not create connection to database server. Attempted reconnect 3 times. Giving up.
The root cause was that: com.mysql.jdbc.exceptions.jdbc4.MySQLNonTransientConnectionException: Could not create connection to database server. Attempted reconnect 3 times. Giving up.

This happened on two servers. One one, the cause was that skip-networking was turned on. In the other situation, it appears that the database name was case sensitive, so TEST was not the same as test. Even though I edited the data source in the CF administrator, it still didn't work (very misleading). When a coworker entered a new data source with the same information (uppercase database name this time from the start), it worked.
Has anyone else seen this problem with the case sensitive database names? And with the data source in CF not updating the case correctly? Seems like a bug in CF.

I was trying to update my ipad software to IOS ver 8 but it was hung and I could not even power off

I was trying to update my ipad software to IOS ver 8 but it was hung.
iTune prompted me to enter password as it could not be connected but ipad is hung.
Tried to power off to restart but could not

Have you tried resetting your ipad?
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
No data will be lost.

Could not even connect to wireless after apple up date!

Similar Messages

Maybe you are looking for