Could not extract the archive since it is corrupted. Errorcode = 2

Hi All,
I have downloaded the jdevstudio11116install.exe, when trying to install the exe I am getting the following error message,
"could not extract the archive since it is corrupted. Errorcode = 2". Also when I tried to unzip the file by using winrar it is giving me the following error.
! C:\Users\demo\Downloads\Programs\jdevstudio11116install.exe: CRC failed in media\adfr_11116_COMP_win32ccjk.jar. The file is corrupt
! C:\Users\demo\Downloads\Programs\jdevstudio11116install.exe: CRC failed in media\jdevf_11116_COMP_win32ccjk.jar. The file is corrupt
Any one please help me in this issue.
Thanking you,
rgds
Parameswaran Bose

Hi timo, unfortunately I run my anti virus software while downloading... Is it possible to download the following jar files seperately and do anything...
! C:\Users\demo\Downloads\Programs\jdevstudio11116install.exe: CRC failed in media\adfr_11116_COMP_win32ccjk.jar. The file is corrupt
! C:\Users\demo\Downloads\Programs\jdevstudio11116install.exe: CRC failed in media\jdevf_11116_COMP_win32ccjk.jar. The file is corrupt
with thanks and regards
Parameswaran Bose

Similar Messages

Jdev11g could not extract the archive since it is corrupted error code = 50

Dears,
Please I need a help
After I downloaded Jdeveloper 11g and I begun to run the EXE it gaved me this error
"could not extract the archive since it is corrupted error code = 50"
I downloaded it again the next day but with the same error and the same problem.
Could anybody know this issue ???? how to fix it ???
Thanks in advance ....
Samy Omar

Do you run a virus checker or some program to scan the web traffic?
Some of them are trying to check every file inside the jars or exe and if they contain more then 65536 file they corrupt the file without saying so.
So try to download if running such programs or try it at an other location.
Timo

" could not extract the archive since it is corrupted. Error code = 50"

HI,
I am trying to install "Oracle WebLogic Server 11gR1 (10.3.4) + Coherence -
Package Installer 10.3.3" on my system,but when i double on the GUI self extractor for WLS,,, i am getting the following error.
" could not extract the archive since it is corrupted. Error code = 50".
so i tried to download another copy at another location,,,,even then the same error continues.
please help me with this.
thank you,
raghuram.k

请暂停杀毒软件就可以安装了。
PLS stop your antivirus software,then you can fix it.

Could not extract the archive since it is corrupted. Error code =2

hi
iaam trying to install bea workshop portal 8.1 SP4 in the d drive and it throws me this error. can anyone plz give me a reason for this
Thanks
--C

Hi,
I have the same problem as Vishal had.
I have installed weblogic portal 92, and worked fine for months. Because of the disk space problem while running the portal application, I increased the free disk space to 10GB, uninstalled the portal 92 platform, but now when i try to download and install weblogic portal 92 platform it gives me the following error:
could not extract the archive since it is corrupted error code = 2.
Any suggestions?
Thank You
Jian Wang

Could not extract the archive since it is corrupted. Error code=3

Dear ALL,
After downloading Jdeveloper 11g, and while I am installing it
The following error arises
"could not extract the archive since it is corrupted. Error code=3".
how to solve this problem
Thanks in advance

Hello All,
The problem was solved, I just re downloaded the file, and re install it again.

Could not complete the Action, since the destination folder does not exist.

I'm a frequent user of "Image Processor" but today accidentally I am getting the error although I am having the required folder as a destination.

Is the Folder on an external medium, what are the complete path and name of the Folder?

Could not stop the extraction

I'm not sure what the error means that it would cause the install to fail.
Observing the /tmp/install_log, I can see the root disk file systems being made, and then:
Beginning Flash archive extraction
Extracting archive: EDHT208_FLAR_1
ERROR: Could not stop the extraction
ERROR: Could not extract Flash archive
Background:
I am building a flash archive using flarcreate off of a running Solaris 8 system and then attempting to bring up a copy of that system somewhere else (disaster recovery experiments).
I'm using the CD based install rather than a seperate jumpstart server.
I have had good luck using flash archives to build Solaris 9 systems based on a reference server, this is the first time I've tried Solaris 8, and the first time I've tried a "dirty" system.
Experience has proven that HTTP doesn't work as a flash archive retreival method because the flar's are larger than 2G. (This one is 8G.)
Solaris 9 gives me an FTP option, which works fine. (Although I really wish there was an SCP option.)
With Solaris 8, I don't have FTP as an option, so I'm trying it with NFS. It sees and grabs the flar ok, then it dies.
How do I get more verbosity in the error message if no one can guess what might be happening?
Could there be a 2G issue with the NFS method as well? If so, what recommendations to folks have to get around it?

I specifically excluded NFS mountpoints in my flarcreate (something that flarcreate initially complained was redundant) and this cleared the "could not stop the extraction" error.
I'm getting another error now, but working through regular Sun support channels to resolve it.
Thanks.

"The Network Adapter could not establish the connection" on Debian

On a new Debian server I was getting the following error when running my Java code:
java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Since none of the solutions listed on this forum worked for me, here is what fixed it:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=560044
Hope it will help others here!

In 8.1.7, we had some restrictions on the selectors that could be used with QueueReceiver
Only the following were supported:
JMSMessageID = 'ID:23452345' to retrieve messages that have a specified message ID (all message IDs being prefixed with
ID:)
JMSCorrelationID = 'RUSH' or JMSCorrelationID LIKE 'RE%' to retrieve messages that have a certain correlationID
The selector that the customer is using will work with TopicSubscribers. On topics users can use user-defined properties such as
color='RED';
The selectors are documented in Chapter 12- Application developer's guide - Advanced Queuing.
In Oracle9i, the QueueReceiver has been enhanced to support all types of selectors including the user-defined properties
For better response please post Advanced Queueing Questions in <b> Products > Database > Oracle Advanced Queueing <b> forum

I am using iphone 3gs since last 4 days. Till yesterday night it was working fine and i have connected this phone for charging . Morning there was apple logo in the screen and every 1mte (approx) it is blinking. I could not restart the phone.Plz help

I am using iphone 3gs since last 4 days. Till yesterday night it was working fine and i have connected this phone for charging . Morning there was apple logo in the screen and every 1mte (approx) it is blinking. I could not restart the phone.Plz help . I have tried to reset even by pressing sleep and home button but it could not help. Please suggest. Still i have connected for charging .

Sounds like you have corrupt backup data, if this occurs from one phone to another. Try restoring the phone as a new device, without a backup. Try using for a day before installing any other apps, etc. See if that improves the battery life. Then try syncing back applications a couple at a time. Something seems to be locking in the processor which is draining the battery.
Do you live in an area where there are Apple Stores? If so, try making an appointment with the Genius Bar to have the device checked out.

HT1212 My iPad locked after 1 incorrect passcode entry and I tried what a senior advisor told my to do, but it could not download the info unless I entered the correct pass code, which I can not do since it does not give me the opportunity.

My iPad locked after 1 incorrect passcode entry and I tried what a senior advisor told my to do, but it could not download the info unless I entered the correct pass code, which I can not do since it does not give me the opportunity. How do I get the window to enter my pass code?

iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

I have been using Adobe Photoshop since 1998. I recently replaced my computer and placed the Adobe Photoshop 5.0 CD in to install, and found that could not load the software, and referred me to Adobe. What should I do?

I have been using Adobe Photoshop since 1998. I recently replaced my computer and placed the Adobe Photoshop 5.0 CD in to install, and found that could not load the software, and referred me to Adobe. What should I do?

According to this forum post from the time of the shutdown, it is only those directly affected.
Activation server shut down for Creative Suite 2, Acrobat 7, and Macromedia products
Here is a list from that link
If your software is affected by the activation server shut down then you will receive an error that the Activation server is unavailable. The specific affected products are as follows:
Acrobat 7.0 - Windows
After Effects 7.0
Audition 3.0
Captivate 1.0
Contribute 2.0
Contribute 3.0
Creative Suite 2.0
Director MX 2004
Dreamweaver MX 2004
Fireworks MX 2004
Flash Paper 2.0
Freehand MX
GoLive CS2
GoLive 9.0
Illustrator CS2
InCopy CS2
InDesign CS2
Macromedia Studo MX 2004
Photoshop CS
Photoshop CS2
Photoshop Elements 4.0
Photoshop Elements 5.0
Premiere Pro 7.0
Production Studio Premium

HT5621 i could not update my applications since the account that applied was when i was in the US...it says that i needed to change itunes store here in the philippines and how do i do that?

i could not update my applications since the account that applied was when i was in the US...it says that i needed to change itunes store here in the philippines and how do i do that?

Click here and follow the instructions to change the iTunes Store country.
(87167)

HT1657 I rented a movie but had to interrupt the download as I was not near a Wi-Fi hot spot for a period of time. I boarded a plane and then could not watch the movie. Can I get a credit for the rental since I was not able to watch it?

I was downloading a rented movie but could not finish the download before I had to board a plane. I went to play the movie on the plane but received an error message and could not watch it. I was charged for the rental. Can I get a credit?

Personally I would raise the problem with iTunes Store Support via:
https://expresslane.apple.com
You can also Report a Problem via the link in your Purchase Invoice e-mail or from your iTunes account Purhcase History by logging into your Account Settings in iTunes on a computer.

"Time Machine could not complete the backup. The backup disk is not availab

I have a Seagate 750 MB external disk connected to the USB port of my Airport Extreme Base Station. It worked fine with Time Machine under Leopard but it's not working the way it was under OS X 10.6.2. I'm hopeful someone can help me solve the problem.
Let's say the name of my Airport Extreme Base Station is "Airport." If I remember correctly, under Leopard time machine would start a wireless backup not long after I turned on the Seagate drive. That no longer happens.
I've erased and re-formatted the Seagate drive with 2 GUID partitions, one for my 24" iMac and one for my 17" MacBook Pro. Both computers are about 3 years old. In order to do the re-partitioning, I had to unplug the Seagate drive from the base station and plug it into one of the iMac's USB ports. If I didn't do this, nothing other than the iMac's drive appears in the left pane of Disk Utility, although the name of my base station, i.e, "Airport" does appear in the Finder and PathFinder (a replacement for Finder that I use).
In fact, Time Machine works under 10.6.2. as long as the Seagate drive is plugged into the iMac's USB port. As soon as I plug the Seagate drive into the USB port of the base station, Time Machine no longer works. The backup is "delayed." When I click on "Back Up Now" a few seconds go by and I get the following dialog box: "Time Machine could not complete the backup. The backup disk is not available."
In my Airport Extreme Base Station setup (Airport Utility version 5.4.2), the "Disks" pane sees both partitions on the Seagate drive. File sharing is enabled on the "File sharing" pane and "Secure Shared Disks:" is set to "With a disk password." "Airport Disks Guest Access:" is not allowed, nor is "Share disks over WAN."
When the Seagate drive is plugged into the base station and I click on "Airport" in the Finder or PathFinder, I'm prompted for the password I mentioned above because the shared disks are secured with a password. Once the password is typed, both partitions on the Seagate drive appear in Finder and PathFinder. When I try a Time Machine backup at this point, I get the same error I described above, i.e., "Time Machine could not complete the backup. The backup disk is not available."
One last thing, I did an "Archive and Install" when I upgraded to Snow Leopard since I thought the changes were relatively minor as compared with past OS X upgrades. Normally, I do a clean install but didn't feel like it this time. I also tried deleting the file /Library/Preferences/com.apple.TimeMachine.plist to no avail and restarted my iMac to no avail.
At this point I'm completely stumped. As I said, Time Machine works as long as the Seagate drive is plugged directly into one of the iMac's USB ports as opposed to the base station's USB port. But doesn't this defeat the purpose of having wireless backup? Once again, the wireless backup worked fine under 10.5.8.
I hope my message is clear and a solution would be most welcome.
Thank you,
Richard

I'm having the same problem. If my TimeMachine drive is not connected, I'll get the "Time machine could not complete the backup" "The backup disk is not available" warning a couple times a day. This is extremely problematic if I'm giving a presentation. I have tried changing my TimeMachine drive, removing that drive, repairing permissions, and have not been able to solve the problem.
Please help!

Install of SAP HANA Studio Dev Ed v1.00.80 fails with "Could not create the Java Virtual Machine"

Hello,
Scope: JVM error during initial install of SAP HANA Studio Developer Edition v1.00.80, Win86/32bit
Source: installation files pulled from HANA Studio tab at https://hanadeveditionsapicl.hana.ondemand.com/hanadevedition/, which is a link from the main HANA site of http://scn.sap.com/community/developer-center/hana. zip folder: "sap_hana_win32_studio_rev80"
Targeted O/S: Windows 7, 32-bit, local Java is SE 7, update 67.   Java environment has been confirmed via checks provided at http://www.java.com/en/download/manual.jsp
Actions taken:
Attempted to update the installation's eclipse.ini file by reducing the -Xmx value; see details below.
Read thru postings such as http://scn.sap.com/thread/3390626 and the threads it recommended.
Checked OSS (ie Note 1859686 - HANA Studio does not start)
Description of installation error:
Shortly after executing "hdbinst", it fails with the error "Could not create the Java Virtual Machine". I've verified that there is nearly 3G of memory free. What I did notice, as shown in the attached files, is that Eclipse is part of this installation and it's pre-loaded with the "eclipse.ini". I firmly believe the solution could be to reduce parameter "-Xmx1024m" to "-Xmx512m" but it's a catch-22 because even after updating eclipse.ini (in installation folder C:\Program Files\SAP\hdbstudio\tmp_p2director2014.08.13_13.36.44\director), the install program requires that the "hdbstudio" folder to be empty upon restarting it.
Since the installation is basically a package with a lot of .jar files, there is no eclipse.ini file available in the source install folder; otherwise, updating it there would be the easiest solution if that option were available. The file is only available in the targeted deployment folder above.
If you have encountered this same error and were able to resolve it, I would be grateful to know of your solution. Thanks very much.
FYI: the HANA Client installed with no issues.
Jim Cleek
FYI: the images below reflect the sequence of images produced during the installation.
after clicking OK above, the screen below gets updated (see the "is not empty" msg).
Below is the eclipse.ini file located in the deployed/target folder:
Message was edited by: Jim Cleek
FYI: Using information from the SAP HANA Database - Studio Installation and Update Guide, I tried to override the installation's use of its eclipse.ini file by passing my own modified version (with "-Xmx512m") of that file that was placed in a separate folder. The cmd used via DOS window was "hdbsetup.exe -a studio --configfile=C:\Users\Admin\Downloads\eclipse.ini" and even though it successfully launched the SAP HANA Lifecycle Management gui, it failed on the first step with the same JVM create error as above because it appears to have used its own eclipse.ini file, which has "-Xmx1024m".

Update: a message was opened with SAP but unfortunately they could not provide a resolution for this particular scenario. They admitted that the eclipse.ini file cannot be updated since it is bundled as part of the installation package. One point to make that I did not make before was that this was being attempted on an Oracle VirtualBox (4.3.10); the SAP HANA contact said he assumed that SAP has not tested this particular scenario, thus it could not be supported.
Resolution: the end result was to abort trying to install SAP HANA Client and Studio on the Oracle VirtualBox but to install it locally on my own desktop, which runs on Windows 7 Enterprise 64-bit with 8G of memory. The SAP HANA files below were downloaded, extracted and installed successfully in the order shown.
FYI: the Studio installation detected that a 64-bit version of Java was not installed so I installed that and then adjusted the User environmental variable JAVA_HOME to point to that new path, leaving the System variable still pointing to the pre-existing 32-bit Java path.
SAPCAR 7.20 -> Windows on x64 64bit: SAPCAR_315-20010453.EXE
IMDB_CLIENT100_80_0-10009664.SAR   Revision 80 for SAP HANA CLIENT 1.00
Support Package SAP HANA CLIENT 1.00 Windows on x64 64bit
IMC_STUDIO100_80_0-20007647.SAR   Revision 80 for SAP HANA STUDIO 1.00
Support Package SAP HANA STUDIO 1.00 Windows on x64 64bit
jre-7u67-windows-x64.exe - http://www.oracle.com/technetwork/java/javase/downloads/jre7-downloads-1880261.html
Jim Cleek
HP Enterprise Services

Could not extract the archive since it is corrupted. Errorcode = 2

Similar Messages

Maybe you are looking for