Could not find a Hyperion Reporting and Analysis in workspace

i installed hyperion 9 system them with reporting and essbase ..
after configured all .. configure shows sucess but after shared services configuration failed in BI
unable to open workspace
when i tried to open Workspace
"Could not find a Hyperion Reporting and Analysis in workspace9 server running on server at port 6800. Please verify your server connect string and confirm that the server is up."
Edited by: user1624634 on Mar 10, 2010 12:28 AM

Hello
May i suggest adressing this question to a Hyperion/Essbase forum:, here is the link i am certain you'll get your answer quicker.
Essbase
Thanks

Similar Messages

Could not find a Hyperion Reporting and analysis -system 9

Dear Experts ,
i have installed Essbase and planning
i have configured work space
http://localhost:19000/worspace
when i am trying to log in to work space the following error is showing
Could not find a Hyperion Reporting and analysis -system 9 server running on Hyperion at port 6800.please verify your server connect string confirm that the server is up
i have started all Hyperion services
could you please help me in this regard,
thanks in advance
Kishore

Have you installed Reporting and Analysis Services?
If you have already installed then start the Reporting and Analysis Services..
Hope this helps..
Regards,
Manmohan Sharma

Hyperion Reporting and Analysis Framework

Hi Everyone,
In the services, the Hyperion Reporting and Analysis Framework is not STARTED. When I start it manually, it starts but again after a minute the START status goes away, meaning it stops by itself.
What could have happened?
Any input would be appreciated.
Thanking you in advance.

These are the kinds of logs it has.
Checking the log in this location
[2012-09-20T10:17:44.299-04:00] [RaFramework0] [INCIDENT_ERROR] [] [oracle.EPMRAF.com.brio.one.web.log.CUServerMonitor] [tid: 20] [userId: <anonymous>] [ecid: 0000JbUajWR6qIC0ZFM6Vr1GMS55000000,1:24476] [SRC_CLASS: com.brio.one.web.log.CUServerMonitor] [APP: RAFRAMEWORK#11.1.2.0] [SRC_METHOD: printServerStatus:?] Servlet pulse, memory( free = 603394288 used = 470347536 total = 1073741824 ) total users = 0 active req = 0 max concurrent req = 0
D:\oracle\Middleware\user_projects\domains\EPMSystem\servers\RaFramework0\logs
[2012-09-18T08:55:49.009-04:00] [RaFramework0] [ERROR] [EPMREG-11037] [oracle.EPMREG.REG] [tid: 11] [userId: <anonymous>] [ecid: 0000JbPSg2e6qIC0ZFM6Vr1GM6xB000000,0:1] [SRC_CLASS: com.hyperion.hit.registry.Registry] [APP: RAFRAMEWORK#11.1.2.0] [SRC_METHOD: getConnection] An error occured when checking the status of the registry connection and reseting it.[[
com.hyperion.hit.registry.exceptions.RegistryException: java.sql.SQLException: ORA-28001: the password has expired

Hyperion Reporting and Analysis - DAS, IR and Job Services Replication..

Dear All,
We are on Hyperion System 9.3.1 on Windows box and Repository in Oracle 10g Database. We have around 300 Interactive scheduled jobs.
When these jobs are getting executed Hyperion Services are getting hang and In logs we are getting "Process out of memory..".
In order to overcome "Process out of Memory.. Exiting" error. We need to replicate DAS, Interactive Reporting and Job Services on the same machine.
I am doing Hyperion's IR, DAS, JOB Services Replication in Development environment. To achieve the same I performed the following tasks :
# I have installed and configured Hyperion System 9.3.1 below components on MS Windows XP professional SP2 and Repository in Oracle 10g database.
Hyperion Shared Services 9.3.1
Hyperion Reporting and Analysis BI+ Services
Hyperion Reporting and Analysis UI+ Services
Every thing was configured fine.
# To replicate the IR, DAS and Job Services. I started the Hyperion Reporting and Analysis BI+ Setup on the same machine then I select IR, DAS and Job Services.
# Next I started Configuration Utility. Which ask me to configure Database. I selected the same database which I used for BI Services previously. Database Configuration was successful.
# I changed the Port as below
Core Services to 7801 instead of 6801
Chaged the port for Job Service 7796 instead of 6796.
# Next started Service Configurator where System was showing one more Job Service (JF2_<hostname>) in Remote Service Configurator. And in Local Service Configurator System was showing new BI and DAS. Then I configured Data Sources in DAS.
# Started the Services.
Next I started the Scheduled Jobs. It is taking same time as earlier. In logs it is showing that Only JF2_<hostname> Service is getting used. System is not using JF1_<HOSTNAME> anymore.
I have few query regarding this.
1) Why Configuration Utility didn't ask for GSM host and Port? Do I need to configure it manually?
2) I have not chaged the port for DAS and IR Services. my concern is regarding port usage by new DAS and IR Services ? Do I need to configure it or It will be managed by system itself?
Please show me the direction. Any help would be highly appreciable.
Regards,
Manmohan Sharma

We have replicated the Hyperion Reporting and Analysis Services by changing the port number of Replicated Services to non-default port.
Services are working fine.
Regards,
Manmohan Sharma

SFTP Seeburger adapter - Could not find channel for report handling between

Hello Friends ,
We have R3 -> PI-> SFTP scenario . The messages are transferred successfully and the file is successfully received at the receiving end . But when we do communication channel monitoring , we see errors in Receiver CC . The Reciever CC contains SFTP adapter (Seeburger) . Recently the Seeburger adapter is upgraded and the below error has started occuring then onwards .
Error Message which we see in CC monitoring for Receiver CC (SFTP) is as below .
Initiation of Transmission Report( job id: da405030-30c6-11df-8b6e-797b8921162c milestone: 290) failed! Exception occured: Error while preparing XI message. Error: Could not find channel for report handling between parties: fromParty, toParty: Itella) - com.seeburger.xi.connector.fw.ConfigurationException: Error while preparing XI message. Error: Could not find channel for report handling between parties: fromParty, toParty: Itella) [3/16/10 8:40 AM]
Could experts help me ...
Thanks for your time .
Regards,
Laxman Nayak .

Hi,
I also have the error you mentioned but we're implementing the Seeburger SFTP adapter for the first time.
I've requested transport acknowledgements in my ABAP proxy and have checked the 'Deliver transmission report' flag in the adapter but I don't know what else I must do.
Any help would be greatly appreciated.
Thanks,
Alan

Hyperion Reporting and Analysis

Hello Gurus,
So I installed Hyperion (11.1.2.2) foundation services(all componants), essbase(all componants), planning (all componants. well, it was only one componant), Reporting and Analysis framework (web application, services and common libraries. i installed only these two because hyperion planning depends on them), financial management ADM driver (chosen by default when i want to install hyperion reporting and analysis). i installed them and configured them all togather. I'm using a Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production on Windows 2008 SP2 32bits.
Configuration of Reporting and Analysis framework failed, and that caused several problems when i ran the EPM system Diagnosis. this is what i got. Note: I'm gonna list only the errors/warnings in anything other than reporting and Analysis. as for reporting and analysis, i'm gonna list everything. sorry it's so long....
Hyperion Foundation
FAILED HTTP: HTTP Checking availability of HTTP context http://DC-HYPERIONT01:19000/raframework/index.jsp
Error: com.hyperion.cis.utils.BadResponseCodeException: Bad response code with GET method: 404
Recommended Action: Check that the application is started
0 seconds
EPM System Registry
FAILED REG: Registry Next issues are present:
LOGICAL_WEB_APP (id: fa67b59381bd8c85S4cc267951398ff60006S73df):
"webAppType" property missed
"context" property missed
"port" property missed
"SSL_Port" property missed
"isSSL" property missed
"host" property missed
"" child missed
RA_FRAMEWORK (id: fa67b59381bd8c85S4cc267951398ff60006S7bc8):
"applicationId" property missed
"RA_PRODUCT" parent missed
RA_FRAMEWORK (id: fa67b59381bd8c85S4cc267951398ff60006S74c6):
"applicationId" property missed
"DATABASE_CONN" child missed
Error: Checker execution failed.
Recommended Action: Refer to the validation logs for exception details.
Financial Reporting
FAILED REG: Datasource Checking if datasource property exists in the registry
Error: ORA-00942: table or view does not exist
Recommended Action: Refer to the validation logs for exception details.
0 seconds
Reporting and Analysis
FAILED CFG: Configuration Validating that configuration tasks have been completed
Error: EPMVLD-01004: The following configuration tasks have not been completed:
FrameworkServicesConfiguration: Configuration Failed
Recommended Action: Attempt to configure referenced tasks
0 seconds
PASSED DB: Database Connectivity Checking connection to database jdbc:oracle:thin:@dc-hypdbt01.nuqulgroup.loc:1521:hybdb
0 seconds
PASSED SVR: Essbase Java API Launch external checker with next command: D:\install03092012\user_projects\epmsystem1\config\validation\11.1.2.0\launchEssbaseJavaAPI.bat EssbaseJAPIConnect ****** DC-HYPERIONT01:1423 Embedded
5 seconds
PASSED EXT: External Authentication Check Native Directory external authentication provider configuration
0 seconds
PASSED REG: Configuration Checking if product has only one product node in registry.
0 seconds
PASSED RA: Reporting and Analysis Check if Reporting and Analysis Services and corresponding Agent Modules belong to the same host.
Reporting and Analysis Services and corresponding Agent Modules belong to the same host.
0 seconds
FAILED RA: Reporting and Analysis Check if all required RAF properties exist under the RAF Logical Web App component.
Error: Some required properties are not found in the RAF Logical Web App component: WebClient.SmartPages.DefaultSmartPage.PreconfiguredCategories, WebClient.SmartPages.ColorScheme.ColorScheme1.BackgroundColor, WebClient.Applications.DAServlet.OpenNewWindow, WebClient.UserInterface.Localization.localLanguageCode, WebClient.SmartPages.ColorScheme.ColorScheme2.HeaderColor, WebClient.Cache.Objects.HeadlinesPageTTL, WebClient.SmartPages.ColorScheme.ColorScheme0.FooterColor, WebClient.Internal.Cookies.EncryptCookies, WebClient.UserInterface.PortalColor.MainFrame.General.ColorMainWizard, WebClient.SmartPages.ColorScheme.ColorScheme0.HeadingColor, WebClient.UserInterface.Localization.localCountryCode, WebClient.Cache.Domain.DomainInfoTTL, WebClient.SmartPages.ColorScheme.ColorScheme3.BCMessagesColor, WebClient.SmartPages.ColorScheme.ColorScheme2.BackgroundColor, WebClient.SmartPages.ColorScheme.ColorScheme1.Name, RCPDirectoryURL2, WebClient.Cache.Objects.CategoryCacheSize, WebClient.UserInterface.JobOutput.MIMETypeToDisplayForSQRProgramOutput, WebClient.Cache.Objects.TaskListingTTL, WebClient.Cache.Objects.CategoryTTL, SmartViewContext, WebClient.Internal.Transfer.PassDCByStream, WebClient.SmartPages.ColorScheme.ColorScheme2.FooterColor, WebClient.SmartPages.ColorScheme.ColorScheme2.LinkColor, WebClient.SmartPages.ColorScheme.ColorScheme1.BCMessagesColor, WebClient.SmartPages.ColorScheme.ColorScheme0.HeaderColor, OfficeAddinSupport, WebClient.SmartPages.ColorScheme.ColorScheme0.BackgroundColor, WebClient.SmartPages.ColorScheme.ColorScheme1.HeaderColor, WebClient.Applications.iHTML.PollingTimeSec, WebClient.SmartPages.ColorScheme.ColorScheme3.LeftColor, WebClient.Cache.Objects.CacheModifyTTL, WebClient.SmartPages.ColorScheme.ColorScheme1.LeftColor, WebClient.Cache.Objects.CacheListTTL, WebClient.UserInterface.Subscription.ShowSubscriptions, WebClient.SmartPages.ColorScheme.ColorScheme2.LeftColor, WebClient.Diagnostics.Log.Configuration, WebClient.UserInterface.JobOutput.ShowHTMLOutputForSQRPrograms, WebClient.UserInterface.Localization.ShowTimeOrder, WebClient.Applications.DAServlet.DASResponseTimeout, WebClient.Applications.DAServlet.PollingTimeSec, WebClient.UserInterface.Localization.localVariant, WebClient.SmartPages.ColorScheme.ColorScheme0.LinkColor, WebClient.UserInterface.SmartCut.ShowAsLink, WebClient.SmartPages.ColorScheme.ColorScheme3.BackgroundColor, WebClient.UserInterface.JobOutput.ShowSPFOutputForSQRPrograms, WebClient.SmartPages.ColorScheme.ColorScheme3.FontColor, WebClient.SmartPages.ColorScheme.ColorScheme3.LinkColor, WebClient.SmartPages.General.MaxNumberOfInitializedFromPublished, WebClient.Internal.Upload.MaxFileSize, WebClient.SmartPages.ColorScheme.ColorScheme2.RightColor, WebClient.SmartPages.ColorScheme.ColorScheme3.HeadingColor, WebClient.SmartPages.ColorScheme.ColorScheme1.LinkColor, WebClient.SmartPages.ColorScheme.ColorScheme1.HeadingColor, WebClient.SmartPages.ColorScheme.ColorScheme2.HeadingColor, WebClient.UserInterface.Localization.ShowDateOrder, WebClient.Cache.Objects.BrowseQueryTTL, RelatedContentProtocol, WebClient.Cache.Objects.PublishedSmartPagesQueryTTL, WebClient.CorporateWorkspage.Folder, WebClient.UserInterface.PortalColor.MainFrame.General.ColorMainFrame, WebClient.SmartPages.Publish.Location, WebClient.SmartPages.General.MaxNumberOfSmartPages, WebClient.SmartPages.ColorScheme.ColorScheme2.Name, WebClient.SmartPages.ColorScheme.ColorScheme3.Name, WebClient.SmartPages.DefaultSmartPage.DefaultColorScheme, WebClient.Cache.Objects.CacheListSize, WebClient.UserInterface.Configuration.EnableMSReportsIntegration, WebClient.SmartPages.ColorScheme.ColorScheme2.FontColor, WebClient.SmartPages.ColorScheme.ColorScheme2.BCMessagesColor, WebClient.SmartPages.ColorScheme.ColorScheme0.RightColor, WebClient.Internal.Temp.Location, WebClient.SmartPages.ColorScheme.ColorScheme0.BCMessagesColor, WebClient.Applications.iHTML.BQServiceResponseTimeout, RAFVersion, customSmartcutUrl, WebClient.UserInterface.PortalColor.MainFrame.Title.ColorMainTitleUnderline, WebClient.SmartPages.ColorScheme.ColorScheme1.FontColor, WebClient.Applications.iHTML.DiskCachePollingPeriod, WebClient.UserInterface.PortalColor.MainFrame.General.ColorMainWizardBorder, WebClient.Cache.Objects.JobTTL, WebClient.SmartPages.General.ShowHeadings, WebClient.SmartPages.ColorScheme.ColorScheme3.FooterColor, WebClient.Applications.DAServlet.ZAC, Folder0, WebClient.SmartPages.ColorScheme.ColorScheme3.RightColor, WebClient.Cache.Notifications.NotificationQueryTTL, WebClient.Internal.Cookies.KeepCookiesBetweenBrowserSessions, WebClient.SmartPages.DefaultSmartPage.ShowBookmarks, WebClient.SmartPages.DefaultSmartPage.PreconfiguredEmbeddedObjects, WebClient.Cache.Browse.JobOutputSummaryListing, WebClient.SmartPages.DefaultSmartPage.ShowExceptionsDashboard, WebClient.SmartPages.ColorScheme.ColorScheme0.Name, WebClient.UserInterface.PortalColor.MainFrame.Text.ColorMainLinkFont, WebClient.SmartPages.ColorScheme.ColorScheme3.HeaderColor, WebClient.Internal.Redirect.RedirectPolicy, WebClient.SmartPages.ColorScheme.ColorScheme0.LeftColor, WebClient.SmartPages.ColorScheme.ColorScheme1.RightColor, WebClient.UserInterface.PortalColor.MainFrame.Text.ColorMainFont, WebClient.SmartPages.ColorScheme.ColorScheme1.FooterColor, WebClient.UserInterface.Localization.Show24HourTime, WebClient.SmartPages.ColorScheme.ColorScheme0.FontColor.
Recommended Action: Ensure that you ran the config tool and configured the RAF Web App component.
0 seconds
FAILED RA: Reporting and Analysis Check if the Agent (AGENT) components exist.
Error: Components not found.
Recommended Action: Ensure that you ran the config tool and configured the Reporting and Analysis Service component.
0 seconds
WARNING RA: Reporting and Analysis Checker execution failed.
Check if RAF Services are available.
No RAF Services (Agent Module) components found in Registry.
0 seconds
PASSED RA: Reporting and Analysis Check if Job Factory data folder exists.
Data file locations are valid.
0 seconds
PASSED RA: Reporting and Analysis Check if every Agent Module is associated with some Agent.
Every Agent Module is associated with some Agent.
0 seconds
FAILED RA: Reporting and Analysis Check if the Reporting and Analysis Setup (RA_SETUP) component exists.
Error: Components not found.
Recommended Action: Ensure that you ran the config tool and configured the Reporting and Analysis component.
0 seconds
PASSED RA: Reporting and Analysis Check if the RAF Web App (RA_FRAMEWORK_WEB_APP) components exist.
Found: 1. Hosts for the components: DC-HYPERIONT01.
0 seconds
FAILED RA: Reporting and Analysis Check consistency of the Service Agent sets between Registry and V8_SERVICEAGENT.
Error: java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
Recommended Action: Ensure that you ran the config tool and configured the Reporting and Analysis Service component.
0 seconds
FAILED RA: Reporting and Analysis Check consistency of the Service Agent properties between Registry and database tables (V8_SERVICEAGENT, V8_SA_PROPS).
Error: java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
Recommended Action: Ensure that you ran the config tool and configured the Reporting and Analysis Service component.
0 seconds
PASSED RA: Reporting and Analysis Check if Agent Modules and corresponding Agents belong to the same host.
Agent Modules and corresponding Agents belong to the same host.
0 seconds
WARNING RA: Reporting and Analysis Checker execution failed.
Check if all required RAF properties exist under the Reporting and Analysis Setup component.
The Reporting and Analysis Setup component is not found.
0 seconds
PASSED RA: Reporting and Analysis Check if every Agent Module (except IR Log) is associated with some Reporting and Analysis Service(s).
Every Agent Module (except IR Log) is associated with some Reporting and Analysis Service(s).
0 seconds
PASSED RA: Reporting and Analysis Check if Service Broker data folder exists.
Data file locations are valid.
0 seconds
FAILED RA: Reporting and Analysis Check if the Reporting and Analysis Service (RA_SERVICE) components exist.
Error: Components not found.
Recommended Action: Ensure that you ran the config tool and configured the Reporting and Analysis Service component.
0 seconds
FAILED RA: Reporting and Analysis Check if the Agent Module (AGENT_MODULE) components exist.
Error: Components not found.
Recommended Action: Ensure that you ran the config tool and configured the Reporting and Analysis Service component.
0 seconds
PASSED RA: Reporting and Analysis Check if all required Workspace configuration files exist under the RAF Logical Web App component.
All required files exist.
0 seconds
WARNING RA: Reporting and Analysis Checker execution failed.
Check if Agents are available.
No Agent components found in Registry.
0 seconds
PASSED RA: Reporting and Analysis Check if every Reporting and Analysis Service is associated with some Agent Module.
Every Reporting and Analysis Service is associated with some Agent Module.
0 seconds
PASSED RA: Reporting and Analysis Check if Event Server data folder exists.
Data file locations are valid.
0 seconds
PASSED RA: Reporting and Analysis Check if every Agent is associated with some Agent Module(s).
Every Agent is associated with some Agent Module(s).
0 seconds
PASSED RA: Reporting and Analysis Check if the RAF Logical Web App (LOGICAL_WEB_APP) component exists.
Found: 1.
0 seconds
PASSED RA: Reporting and Analysis Check if Repository data folder exists.
Data file locations are valid.
0 seconds
FAILED WA: Essbase connectivity Check connectivity between Web Analysis Server and Essbase Server.
Error: An error occurred while running the check.
Recommended Action: Ensure that: 1) Essbase Server is configured properly and started; 2) Web Analysis Web Application is configured and started.
0 seconds
FAILED WA: HFM connectivity Check connectivity between Web Analysis Server and Financial Management Server.
Error: An error occurred while running the check.
Recommended Action: Ensure that: 1) Financial Management Server is configured properly and started; 2) Web Analysis Web Application is configured and started.
0 seconds
FAILED WA: Login Check the possibility to login on Web Analysis Server.
Error: An error occurred while running the check.
Recommended Action: Ensure that Web Analysis Web Application is configured and started.
0 seconds
PASSED WEB: Web Application Availability of Web application context http://DC-HYPERIONT01:9000/WebAnalysis
0 seconds
Many Many thanks in advance,
Zain

Hello Krishna,
yes, looks like i didn't have moduke 7 downloaded. however after i did and installed it, i still got the following errors that seemed to do with connectivity to RAFRAMEWORK and it's database. I am going to list errors in all modules, except for Reporting and Analysis, i'm going to post everythign else.
Hyperion Foundation
FAILED HTTP: HTTP Checking availability of HTTP context http://DC-HYPERIONT01:19000/raframework/index.jsp
Error: com.hyperion.cis.utils.BadResponseCodeException: Bad response code with GET method: 404
Recommended Action: Check that the application is started
0 seconds
EPM System Registry
FAILED REG: Registry Next issues are present:
LOGICAL_WEB_APP (id: fa67b59381bd8c85S4cc267951398ff60006S73df):
"webAppType" property missed
"context" property missed
"port" property missed
"SSL_Port" property missed
"isSSL" property missed
"host" property missed
"" child missed
RA_FRAMEWORK (id: fa67b59381bd8c85S4cc267951398ff60006S74c6):
"applicationId" property missed
"DATABASE_CONN" child missed
Error: Checker execution failed.
Recommended Action: Refer to the validation logs for exception details.
Financial Reporting
FAILED REG: Datasource Checking if datasource property exists in the registry
Error: Datasource property raframeworkDatasource not found.
Recommended Action: Fix failure manually with epmsys_registry tool.
0 seconds
FAILED REG: Datasource Checking if datasource property exists in the registry
Error: Datasource JNDI property raframeworkDatasourceJNDI not found.
Recommended Action: Fix failure manually with epmsys_registry tool.
0 seconds
Reporting and Analysis
PASSED CFG: Configuration Validating that configuration tasks have been completed
0 seconds
PASSED DB: Database Connectivity Checking connection to database jdbc:oracle:thin:@dc-hypdbt01.nuqulgroup.loc:1521:hybdb
0 seconds
PASSED SVR: Essbase Java API Launch external checker with next command: D:\install03092012\user_projects\epmsystem1\config\validation\11.1.2.0\launchEssbaseJavaAPI.bat EssbaseJAPIConnect ****** DC-HYPERIONT01:1423 Embedded
6 seconds
PASSED EXT: External Authentication Check Native Directory external authentication provider configuration
0 seconds
PASSED REG: Configuration Checking if product has only one product node in registry.
0 seconds
PASSED RA: Reporting and Analysis Check if the RAF Web App (RA_FRAMEWORK_WEB_APP) components exist.
Found: 1. Hosts for the components: DC-HYPERIONT01.
0 seconds
PASSED RA: Reporting and Analysis Check if every Agent Module (except IR Log) is associated with some Reporting and Analysis Service(s).
Every Agent Module (except IR Log) is associated with some Reporting and Analysis Service(s).
0 seconds
PASSED RA: Reporting and Analysis Check if IR BI Services are available.
All IR BI Services are available: IRBI_AGENT_MODULE (Agent on dc-hyperiont01).
0 seconds
PASSED RA: Reporting and Analysis Check if the Reporting and Analysis Service (RA_SERVICE) components exist.
Found: 37.
0 seconds
PASSED RA: Reporting and Analysis Check if the Agent (AGENT) components exist.
Found: 1. Hosts for the components: DC-HYPERIONT01.
0 seconds
FAILED RA: Reporting and Analysis Check consistency of the Service Agent properties between Registry and database tables (V8_SERVICEAGENT, V8_SA_PROPS).
Error: There is inconsistency between Registry and V8_SERVICEAGENT for the following items: JF1, SB1, RM1, ES1.
Recommended Action: Ensure that you ran the config tool and configured the Reporting and Analysis Service component.
0 seconds
PASSED RA: Reporting and Analysis Check if Service Broker data folder exists.
Data file locations are valid.
1 seconds
PASSED RA: Reporting and Analysis Check if the Agent Module (AGENT_MODULE) components exist.
Found: 6.
0 seconds
PASSED RA: Reporting and Analysis Check if Repository data folder exists.
Data file locations are valid.
1 seconds
PASSED RA: Reporting and Analysis Check if IR Job Services are available.
All IR Job Services are available: IRJOB_AGENT_MODULE (Agent on dc-hyperiont01).
0 seconds
PASSED RA: Reporting and Analysis Check if Reporting and Analysis Services and corresponding Agent Modules belong to the same host.
Reporting and Analysis Services and corresponding Agent Modules belong to the same host.
3 seconds
PASSED RA: Reporting and Analysis Check if RAF Services are available.
All RAF Services are available: RAF_AGENT_MODULE (Agent on dc-hyperiont01), RAF_AGENT_MODULE (Agent on dc-hyperiont01).
0 seconds
PASSED RA: Reporting and Analysis Check if IR Log Services are available.
All IR Log Services are available: IRLOG_AGENT_MODULE (Agent on dc-hyperiont01).
0 seconds
PASSED RA: Reporting and Analysis Check if all required Workspace configuration files exist under the RAF Logical Web App component.
All required files exist.
0 seconds
PASSED RA: Reporting and Analysis Check if every Reporting and Analysis Service is associated with some Agent Module.
Every Reporting and Analysis Service is associated with some Agent Module.
1 seconds
PASSED RA: Reporting and Analysis Check consistency of the Service Agent sets between Registry and V8_SERVICEAGENT.
Data in Registry and database are consistent.
0 seconds
PASSED RA: Reporting and Analysis Check if every Agent is associated with some Agent Module(s).
Every Agent is associated with some Agent Module(s).
0 seconds
PASSED RA: Reporting and Analysis Check if every Agent Module is associated with some Agent.
Every Agent Module is associated with some Agent.
0 seconds
FAILED RA: Reporting and Analysis Check if all required RAF properties exist under the RAF Logical Web App component.
Error: Some required properties are not found in the RAF Logical Web App component: WebClient.SmartPages.DefaultSmartPage.PreconfiguredCategories, WebClient.SmartPages.ColorScheme.ColorScheme1.BackgroundColor, WebClient.Applications.DAServlet.OpenNewWindow, WebClient.UserInterface.Localization.localLanguageCode, WebClient.SmartPages.ColorScheme.ColorScheme2.HeaderColor, WebClient.Cache.Objects.HeadlinesPageTTL, WebClient.SmartPages.ColorScheme.ColorScheme0.FooterColor, WebClient.Internal.Cookies.EncryptCookies, WebClient.UserInterface.PortalColor.MainFrame.General.ColorMainWizard, WebClient.SmartPages.ColorScheme.ColorScheme0.HeadingColor, WebClient.UserInterface.Localization.localCountryCode, WebClient.Cache.Domain.DomainInfoTTL, WebClient.SmartPages.ColorScheme.ColorScheme3.BCMessagesColor, WebClient.SmartPages.ColorScheme.ColorScheme2.BackgroundColor, WebClient.SmartPages.ColorScheme.ColorScheme1.Name, RCPDirectoryURL2, WebClient.Cache.Objects.CategoryCacheSize, WebClient.UserInterface.JobOutput.MIMETypeToDisplayForSQRProgramOutput, WebClient.Cache.Objects.TaskListingTTL, WebClient.Cache.Objects.CategoryTTL, SmartViewContext, WebClient.Internal.Transfer.PassDCByStream, WebClient.SmartPages.ColorScheme.ColorScheme2.FooterColor, WebClient.SmartPages.ColorScheme.ColorScheme2.LinkColor, WebClient.SmartPages.ColorScheme.ColorScheme1.BCMessagesColor, WebClient.SmartPages.ColorScheme.ColorScheme0.HeaderColor, OfficeAddinSupport, WebClient.SmartPages.ColorScheme.ColorScheme0.BackgroundColor, WebClient.SmartPages.ColorScheme.ColorScheme1.HeaderColor, WebClient.Applications.iHTML.PollingTimeSec, WebClient.SmartPages.ColorScheme.ColorScheme3.LeftColor, WebClient.Cache.Objects.CacheModifyTTL, WebClient.SmartPages.ColorScheme.ColorScheme1.LeftColor, WebClient.Cache.Objects.CacheListTTL, WebClient.UserInterface.Subscription.ShowSubscriptions, WebClient.SmartPages.ColorScheme.ColorScheme2.LeftColor, WebClient.Diagnostics.Log.Configuration, WebClient.UserInterface.JobOutput.ShowHTMLOutputForSQRPrograms, WebClient.UserInterface.Localization.ShowTimeOrder, WebClient.Applications.DAServlet.DASResponseTimeout, WebClient.Applications.DAServlet.PollingTimeSec, WebClient.UserInterface.Localization.localVariant, WebClient.SmartPages.ColorScheme.ColorScheme0.LinkColor, WebClient.UserInterface.SmartCut.ShowAsLink, WebClient.SmartPages.ColorScheme.ColorScheme3.BackgroundColor, WebClient.UserInterface.JobOutput.ShowSPFOutputForSQRPrograms, WebClient.SmartPages.ColorScheme.ColorScheme3.FontColor, WebClient.SmartPages.ColorScheme.ColorScheme3.LinkColor, WebClient.SmartPages.General.MaxNumberOfInitializedFromPublished, WebClient.Internal.Upload.MaxFileSize, WebClient.SmartPages.ColorScheme.ColorScheme2.RightColor, WebClient.SmartPages.ColorScheme.ColorScheme3.HeadingColor, WebClient.SmartPages.ColorScheme.ColorScheme1.LinkColor, WebClient.SmartPages.ColorScheme.ColorScheme1.HeadingColor, WebClient.SmartPages.ColorScheme.ColorScheme2.HeadingColor, WebClient.UserInterface.Localization.ShowDateOrder, WebClient.Cache.Objects.BrowseQueryTTL, RelatedContentProtocol, WebClient.Cache.Objects.PublishedSmartPagesQueryTTL, WebClient.CorporateWorkspage.Folder, WebClient.UserInterface.PortalColor.MainFrame.General.ColorMainFrame, WebClient.SmartPages.Publish.Location, WebClient.SmartPages.General.MaxNumberOfSmartPages, WebClient.SmartPages.ColorScheme.ColorScheme2.Name, WebClient.SmartPages.ColorScheme.ColorScheme3.Name, WebClient.SmartPages.DefaultSmartPage.DefaultColorScheme, WebClient.Cache.Objects.CacheListSize, WebClient.UserInterface.Configuration.EnableMSReportsIntegration, WebClient.SmartPages.ColorScheme.ColorScheme2.FontColor, WebClient.SmartPages.ColorScheme.ColorScheme2.BCMessagesColor, WebClient.SmartPages.ColorScheme.ColorScheme0.RightColor, WebClient.Internal.Temp.Location, WebClient.SmartPages.ColorScheme.ColorScheme0.BCMessagesColor, WebClient.Applications.iHTML.BQServiceResponseTimeout, RAFVersion, customSmartcutUrl, WebClient.UserInterface.PortalColor.MainFrame.Title.ColorMainTitleUnderline, WebClient.SmartPages.ColorScheme.ColorScheme1.FontColor, WebClient.Applications.iHTML.DiskCachePollingPeriod, WebClient.UserInterface.PortalColor.MainFrame.General.ColorMainWizardBorder, WebClient.Cache.Objects.JobTTL, WebClient.SmartPages.General.ShowHeadings, WebClient.SmartPages.ColorScheme.ColorScheme3.FooterColor, WebClient.Applications.DAServlet.ZAC, Folder0, WebClient.SmartPages.ColorScheme.ColorScheme3.RightColor, WebClient.Cache.Notifications.NotificationQueryTTL, WebClient.Internal.Cookies.KeepCookiesBetweenBrowserSessions, WebClient.SmartPages.DefaultSmartPage.ShowBookmarks, WebClient.SmartPages.DefaultSmartPage.PreconfiguredEmbeddedObjects, WebClient.Cache.Browse.JobOutputSummaryListing, WebClient.SmartPages.DefaultSmartPage.ShowExceptionsDashboard, WebClient.SmartPages.ColorScheme.ColorScheme0.Name, WebClient.UserInterface.PortalColor.MainFrame.Text.ColorMainLinkFont, WebClient.SmartPages.ColorScheme.ColorScheme3.HeaderColor, WebClient.Internal.Redirect.RedirectPolicy, WebClient.SmartPages.ColorScheme.ColorScheme0.LeftColor, WebClient.SmartPages.ColorScheme.ColorScheme1.RightColor, WebClient.UserInterface.PortalColor.MainFrame.Text.ColorMainFont, WebClient.SmartPages.ColorScheme.ColorScheme1.FooterColor, WebClient.UserInterface.Localization.Show24HourTime, WebClient.SmartPages.ColorScheme.ColorScheme0.FontColor.
Recommended Action: Ensure that you ran the config tool and configured the RAF Web App component.
0 seconds
PASSED RA: Reporting and Analysis Check if Job Factory data folder exists.
Data file locations are valid.
1 seconds
PASSED RA: Reporting and Analysis Check if IR DAS Services are available.
All IR DAS Services are available: IRDAS_AGENT_MODULE (Agent on dc-hyperiont01).
0 seconds
PASSED RA: Reporting and Analysis Check if Event Server data folder exists.
Data file locations are valid.
1 seconds
PASSED RA: Reporting and Analysis Check if the Interactive Reporting Product (INTERACTIVE_REPORTING_PRODUCT) component exists.
Found: 1.
0 seconds
FAILED RA: Reporting and Analysis Check if the Reporting and Analysis Setup (RA_SETUP) component exists.
Error: Found: 2, which is more than 1. This indicates some problem.
Recommended Action: Ensure that you ran the config tool and configured the Reporting and Analysis component.
0 seconds
PASSED RA: Reporting and Analysis Check if all required RAF properties exist under the Reporting and Analysis Setup component.
All required properties exist.
0 seconds
PASSED RA: Reporting and Analysis Check if the RAF Logical Web App (LOGICAL_WEB_APP) component exists.
Found: 1.
0 seconds
PASSED RA: Reporting and Analysis Check if Agent Modules and corresponding Agents belong to the same host.
Agent Modules and corresponding Agents belong to the same host.
0 seconds
PASSED RA: Reporting and Analysis Check if Agents are available.
All Agents are available: Agent on dc-hyperiont01.
0 seconds
PASSED SDKC: SDK checker Launch external checker with next command: D:\install03092012\user_projects\epmsystem1\config\validation\11.1.2.0\launchChecker.bat PingBQService ****** localhost 6800
11 seconds
PASSED SDKC: SDK checker Launch external checker with next command: D:\install03092012\user_projects\epmsystem1\config\validation\11.1.2.0\launchChecker.bat FetchCategory ****** localhost 6800 /Sample Content
16 seconds
FAILED WA: Essbase connectivity Check connectivity between Web Analysis Server and Essbase Server.
Error: An error occurred while running the check.
Recommended Action: Ensure that: 1) Essbase Server is configured properly and started; 2) Web Analysis Web Application is configured and started.
0 seconds
FAILED WA: HFM connectivity Check connectivity between Web Analysis Server and Financial Management Server.
Error: An error occurred while running the check.
Recommended Action: Ensure that: 1) Financial Management Server is configured properly and started; 2) Web Analysis Web Application is configured and started.
0 seconds
FAILED WA: Login Check the possibility to login on Web Analysis Server.
Error: An error occurred while running the check.
Recommended Action: Ensure that Web Analysis Web Application is configured and started.
1 seconds
PASSED WEB: Web Application Availability of Web application context http://DC-HYPERIONT01:9000/WebAnalysis
0 seconds
Many many thanks in advance,
Zain

Unable to register Hyperion Reporting and Analysis with Shared Services

Hello everybody,
I'm trying to install and configure Foundation Services in order to schedule Brio Query documents execution and distribution.
IBM DB2 Express has been installed and configured.
Shared Services have been installed and configured.
Reporting and Analysis - System 9 Services have been installed and not yet configured.
Reporting and Analysis - System 9 UI Services have been installed and not yet configured.
When proceeding with Hyperion Reporting and Analysis configuration in registering with Shared Services, provided with the same host, port, user profile and password used for configuring Shared Services, I get the following message:
"An unknown CSS error occured.
Please check that the information entered is correct."
Messages from configtool.log file:
"(Aug 21, 2008, 09:32:32 AM), com.hyperion.cis.config.CmsRegistrationUtil, DEBUG, Getting CSS instance
(Aug 21, 2008, 09:32:32 AM), com.hyperion.cis.config.CmsRegistrationUtil, DEBUG, URL for CSS.xml = https://itblq001.wincor-nixdorf.com:58080/interop/framework/getCSSConfigFile
(Aug 21, 2008, 09:32:32 AM), com.hyperion.cis.config.CmsRegistrationUtil, DEBUG, Authenticate LStoppa user to CSS.
(Aug 21, 2008, 09:32:32 AM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, Failed to authenticate user = LStoppa"
I can't understand what's happening. May you help me?
Thank you for every hints.
Regards
Lucia

The service runs until I try to confirm the registration while configuring HRA. Then it stops.
Apologies for the simple question, as I am trying to make the whole Hyperion System 9 running with little knowledge of it: how do I log to shared services?
Thanks

Invalid database schema for product hyperion reporting and analysis

I tried to re-configure the BI core service to a new database
But I get the message "invalid database schema for product hyperion reporting and analysis"
The database is a restore of a production backup on a different MSSQL2005 server.
I can not believe its really a sql schema matter.
Does anyone know whats wrong?

You cannot restore a BI+ database from backup...It is somewehere in the doc. There a re lots of references to the old server and config in the BI+ tables and you d need to edit/remove some files on the file server too. There is a doc available to do that but its far from simple.
Best way is to export the content of your repository, configure a new DB and then reimport the content.
If you re really stuck, drop me an email and ill send you that doc. I think ive still got it.
Seb
www.taysols.com.au
[email protected]

Just downloaded Yosemite on my Mac and the Yosemite update for Garage Band. Now when I open an existing Garage Band project and click on a vocal track, a message window says, "Could not find General Audio 10" and have no smart controls. Help?

Just downloaded Yosemite on my Mac and the Yosemite update for Garage Band. Now when I open an existing Garage Band project and click on a vocal track, a message window says, "Could not find General Audio 10" and have no smart controls for that track (reverb, etc.) Help?

Try this fix posted by Robinson Collins:
Re: I downloaded Garage Band 2x and the same note appears: there is no General Audio 10. Please advise. Thank you.
Try this: Go to your menu bar, select "Garageband" and then "Restore Sound Library..."
It can take awhile to download as it's a pretty big library. You might need to also select "Update Sound Library..." after the restore is done.

Separate Reporting and Analysis from Workspace

In the prior releases we have dedicated a separate server for Financial Reporting modules (FR web, scheduler, print server, etc.). In 11.1.2.x, we have Hyperion Financial Reporting - Web Application and Hyperion Reporting and Analysis Framework - Web Application.
What is the difference between these two? If I want to dedicate a single host for only report generation/report viewing how, could I separate Framework and Web services apart from Workspace (which we want on a server with the rest of Foundation services (HSS/APS/EPMA/OHS/EAS, etc.). Currently I have Reporting and Analysis Framework and Hyperion Reporting and Analysis Framework - Web Application on one server and Financial Reporting - Web Application by itself on a second. Which service needs the most horsepower/resources when executing batches/books and/or the odd 'large report'? I think it was implied that the Web deployments can be on more than one server and one can load balance the two instances. But suppose I really want to isolate the report processing away from Foundation Services/ Is there a recommended way to do that?
Thanks in advance,
-Vince

John,
No, I don't believe it will remove the apps and I have to change the target for each of the three apps to remove them from EPMSever0, and ensure they are in new managed server(s).
That's what I had to do when I separated Planning. (That was your hint, thanks)
Hope my plan is fine. (Sure will be doing a cold backup)
Thanks
Edited by: user8769031 on Feb 7, 2013 11:02 AM

Hyperion Reporting and Analysis 9.3.1 Distributed/Replicated Installation

I am looking for documentation that explains how to distribute Reporting and Analysis 9.3.1 components across multiple servers. I have found documents that say you can do it, but have not been successful in finding documents that explain it.

http://download.oracle.com/docs/cd/E10530_01/doc/nav/portal_4.htm
Greetings...
Sim

Hyperion Reporting And Analysis Server

Can Some One Tell me what Hyperion Reporting Analysis Server Is? How do we get this Installed at Port 6800 and what is the name of the executable.
I can't login into Workspace or Reporting Studio becuase of this server?
Thanks
Raghu

Hi
check weather the FR service is running!
Control panel -> Performance and maintenance -> Administration tools -> Services
if required start the service manualy
REgards
alex

Hyperion Reporting and Analysis Framework Agent issue

Hi All,
         Right after have installed and configured all EPM 11.1.2.3 environment on Windows 2008, I had to stop all services and restarted the server for maintenance, after start all EPM services the RA Framework stops after have started and the following message is displayed at Event Viewer.
"The description for Event ID 0 from source HyS9RaFrameworkAgent_epmsystem1 cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
The Java Virtual Machine has exited with a code of 0, the service is being stopped.
the message resource is present but the message is not found in the string/message table"
        What does it means ? Someone could help me on that ?
Thanks in advance

Looking into log file agent.log at C:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\ReportingAnalysis, I've found the following :
[2013-08-29T11:27:25.166-03:00] [EPMAGENT] [ERROR] [] [oracle.EPMAGENT.com.oracle.cmc.Agent] [tid: 10] [ecid: 0000K3AU9r0Fw0G6yzuXMG1I7pd5000000,0] Error while starting agent[[
com.oracle.cmc.agent.AgentException: Can't create RMI registry & bind to RMI Registry
at com.oracle.cmc.Agent.doRmiRegistry(Agent.java:620)
at com.oracle.cmc.Agent.start(Agent.java:152)
at com.oracle.cmc.Agent.main(Agent.java:936)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.brio.one.common.utils.Loader.run(Unknown Source)
at com.brio.one.common.utils.Loader.main(Unknown Source)
Caused by: java.rmi.server.ExportException: Port already in use: 6861; nested exception is:
java.net.BindException: Address already in use: JVM_Bind
at sun.rmi.transport.tcp.TCPTransport.listen(TCPTransport.java:310)
at sun.rmi.transport.tcp.TCPTransport.exportObject(TCPTransport.java:218)
at sun.rmi.transport.tcp.TCPEndpoint.exportObject(TCPEndpoint.java:393)
at sun.rmi.transport.LiveRef.exportObject(LiveRef.java:129)
at sun.rmi.server.UnicastServerRef.exportObject(UnicastServerRef.java:188)
at sun.rmi.registry.RegistryImpl.setup(RegistryImpl.java:100)
at sun.rmi.registry.RegistryImpl.<init>(RegistryImpl.java:86)
at java.rmi.registry.LocateRegistry.createRegistry(LocateRegistry.java:186)
at com.oracle.cmc.util.RmiUtil.createRegistryAndBindAgent(RmiUtil.java:108)
at com.oracle.cmc.Agent.doRmiRegistry(Agent.java:612)
... 8 more
Caused by: java.net.BindException: Address already in use: JVM_Bind
at java.net.PlainSocketImpl.socketBind(Native Method)
at java.net.PlainSocketImpl.bind(PlainSocketImpl.java:383)
at java.net.ServerSocket.bind(ServerSocket.java:328)
at java.net.ServerSocket.<init>(ServerSocket.java:194)
at java.net.ServerSocket.<init>(ServerSocket.java:106)
at sun.rmi.transport.proxy.RMIDirectSocketFactory.createServerSocket(RMIDirectSocketFactory.java:27)
at sun.rmi.transport.proxy.RMIMasterSocketFactory.createServerSocket(RMIMasterSocketFactory.java:333)
at sun.rmi.transport.tcp.TCPEndpoint.newServerSocket(TCPEndpoint.java:649)
at sun.rmi.transport.tcp.TCPTransport.listen(TCPTransport.java:299)
... 17 more
   But the RMI servics starts without problem....

Is there any way to speak with an actual person at verizon support. i could not find a phone number and the chat is always unavailable?

is there anyway to speak with

Dial *611 from a cell phone or (800) 922-0204; when you get the phone tree, press 4 for Other and say Agent.

Reporting and Analysis server down need to move to another server

I lost my original server for RA and re-installed the components on another server, however, when I try to access from workspace, I receive the message *"Could not find a Hyperion Reporting and analysis server running on "old server name' at port 6800. Please veriify your server connect string and confirm the server is set up".*
I've re-run the installer and configuration to no avail. Is there a configuration file that I have to update someplace?

This basically means that the HSS registry is still pointing to the old server name for RA_FRAMEWORK component.You will have to check through the registry report whether there are multiple instance of RA framework registered (one with the old server and another with the new server).If yes you can delete the old one from registry through the epmsys_registry command tool and reconfigure with the new server.
If you want assistance with the same,please raise an SR with Oracle support and should be able to guide you through.

Could not find a Hyperion Reporting and Analysis in workspace

Similar Messages

Maybe you are looking for