Could not find any data to display - how to modify system message
Hi,
We created an exception report in the Web Application Designer.
If there are no exceptions (so there is no data to display) the following standard system message is shown:
Could not find any data to display. This might be due to the current selection of variable or filter values
We would however like to modify/remove this message.
How can this be done?
Thanks
Dave
Hi,
Please check the link:
/people/marc.bernard/blog/2008/10/10/how-to-filter-messages-created-by-bi-ip-planning-functions-and-sequences
Please check the Q&A section of above weblog which mentions about
function module RRMS_MESSAGE_HANDLING which could be helpful.
Please also refer to SDN thread:
Re: WAD - messages - message type
Regards,
Amit
Similar Messages
-
Data selection procedure 400 could not find any data
Hi ,
I am getting the Information message "Data selection procedure 400 could not find any data " while doing the Result recording of a inspection lot
Inspection lot status :- REL CALC
Inspection lot Origin :- 04 GR from production order
No user status active
This message i am getting in some inspection lot only
Kindly help me to understand the possible resaon for this message
Thanks,
Ishwarhi,
u r using any copy inspection result like of thing, if not than please provide the Mssg number. and possible than check ur plan properly.
F9 i have checked, this prblm occurs when u using the Copy inspecttion result during RR in QA32, ma suggesstion is to checck ur config "Copy inspection results" in SPRO properly against inspection type "04", and than check ur qaulity plan, than execute it will resolve.
For more information:
SPRO Settings: COPY INSPECTION RESULTS DURING RESULTS RECORDING
Regards
Edited by: D GURU on Dec 5, 2011 8:35 AM -
I have administrator rights to the computer. The drivers are up to date. But I am still getting the error message "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again" when opening Premier Pro CS5.5. This appears to have happed after I upgraded to Mac OS 10.10.2.
Anyone?
ThanksHi Stan.
I had the same problem as you did though I am using Adobe CC. I saw nobody replied to you so perhaps my eventual success on my later version may have applications to the error on your version.
Anyhow, I did all the suggestions found here (Error "Premiere Pro could not find any capable video play modules" | Startup ) first and updated my NVidea card to no avail. Eventually what did the trick was this...
After mucking about with the video card, I said "OK lets just have a go at Premiere itself." So I uninstalled Premiere CC and reinstalled it. Now for some reason it didn't give me the latest patch but a slightly earlier version than the current one but lo and behold it was fine with the video card again. I was able to get my friend's video imported and quickly edited but then was having some issues with exporting where it would hang up but I went into Adobe Media Encoder and exported it there without a care. That task out of the way, I then went and made the update to the latest patch and it works perfectly fine - no video driver issues.
So short of it is this - if you've updated your drivers, perhaps what you could try uninstalling and reinstalling Premiere.
Let me know if this works.
Cheers and good luck -
I updated to Premiere Pro CC 2014, all the other Adobe CC 2014 software works great, but Premiere doesnt even load. The starting page (frame) comes up - my whole computer slows down and after a minute or two it crashes completely and comes up with the message : "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again."
I'm running a macbook Pro 15" (2014) with 16GB RAM and 760GB SSD.
PLEASE HELP!Hi Delarey,
Please go to the following location and rename the folder to old_folder name
User/user library/Application Support and rename Adobe folder
User/user library/Preferences and rename the Adobe folder
Then go to Documents folder and Go to Adobe/Premiere pro/8.0 and rename 8.0 folder
Make sure that you are in user library if you are not sure check the link below.
Access hidden user library files | Mac OS 10.7 and later
Regards,
Vinay -
Server could not find any Meta-Data devices!
Our MDC dropped out and the backups did not engage.
On a reboot of the MDC we were able to mount the volume, but all files (QuickTme movies, FCP projct files) could not be opened with an "unknown file type error".
We shut all the clients down we checked the volume and (cvfsck -nv) and while "dirty" it did not report any errors.
Stopped the volume and ran a cvfsck -w which gave us:
"Server could not find any Meta-Data devices!"
Checking Xsan admin logs shows us:
"PioOpen: no such device.
Fatal: Cannot open stripe group "md" - Operation not supported by device
Fatal: Physio_init failed."
Where "md" is our metadata storage pool.
We shutdown all switches, RAIDS, clients, etc, but bring them all back up and checking with one MDC or another is the same result. Volume will not mount.
All fiber connections seem good, checked in RAID admin and on switch.
Ideas?AppleCare suggested that maybe a metadata backup could have helped.
http://docs.info.apple.com/article.html?artnum=303371
In any case, we nuked and paved. -
Premier Pro CC will not open, even though all my computer software is updated. It comes up with the message every time I try and open it. "Adobe Premier Pro could not find any capable video play modules. Please update your video display drivers and start again." What does this mean? I have been searching the internet for an answer for hours. Urgent help needed.
Error "Premiere Pro could not find any capable video play modules" | Startup
-
The system could not find any entries that are relevant to costing.
plz give the solution ,its urgent
Message no. CK060
Diagnosis
The system could not find any entries that are relevant to costing.
System Response
The system did not cost the object.
Procedure
Check whether the following objects should be flagged as relevant to costing:
Items in the BOM
Display BOM
Operations in the routing
Control key in the routing
1. Look at the message log.
2. Check whether a quantity was specified in the confirmation.hi,
iam facing the problem while creating the
stnadard cost estimate ck11n
the system prompts the following message
confirmation
Logistics - General (LO)
Information from the vendor to the recipient about the status of the purchase order.
The term confirmation covers different types of information from the vendor to the customer, such as order, loading or transportation confirmation and the shipping notification.
If materials planning takes place without a confirmation, planning can only be based on the delivery dates and quantities in the purchase order. In contrast, confirmations make it possible for the customer to plan the materials more precisely because between the purchase order and planned delivery date, more reliable information has become available.
Logistics - General (LO)
Communication sent by a vendor to a customer regarding the status of a purchase order.
The term "confirmation" (short for "vendor confirmation") is an umbrella term for various types of information provided by a vendor to a customer, including order acknowledgments, loading or transport confirmations and shipping notifications.
If the customer's materials planning and inventory control system does not work with confirmations, it can only refer to the delivery dates and quantities set out in the purchase order. The use of confirmations, on the other hand, makes the materials planning and inventory control process more precise, since between the PO date and the planned delivery date the customer receives increasingly reliable information about the pending arrival of ordered goods.
Treasury Management (TR-TM)
After concluding a financial transaction, a confirmation of the related contract data is sent to the relevant business partner. Confirmations can be printed or sent electronically directly from the R/3 System. Confirmation forms are defined via the correspondence type.
Logistics - General (LO)
Part of order monitoring, this documents the processing status of operations or sub-operations. In the SAP System, a distinction is made between partial and final confirmations.
A final confirmation is used to determine
at which work center the operation should be carried out
who has carried out the operation
the quantities of yield and scrap quantities that have been produced
the size of the standard values required for the actual operation
Materials Management (MM)
Communication from a vendor to a customer providing information on the status of a purchase order.
As used in this sense, the term "confirmation" can cover a number of different documents, such as order acknowledgment, loading confirmation, or shipping notification. Also termed "order acceptance/fulfillment confirmation".
If the materials planning and control system operates without such confirmations, it can only work on the basis of the delivery dates and quantities in the purchase order. Confirmations, on the other hand, enable the customer to plan more exactly. In the period between the issue of the PO and the planned delivery date he is provided with more up-to-date and increasingly reliable information on the expected delivery.
Project System (PS)
A confirmation is a part of network control. It documents the state of processing for network activities and activity elements. There are two types of confirmations in the R/3 System: partial and final confirmations.
A confirmation is used to record:
the work center where the activity was carried out
the person who carried out the activity
the yield and scrap produced in an activity
the actual values for the standard times
Intellectual Property Management (CRM-IM-IPM)
A report made by the licensee and defined in the rights sale contract on sales volumes or other quantities (such as audience figures for a film) during a period.
Receiving (ECO-BBP-REC)
An electronic document that combines the functions of goods receipts and service entry sheets. By creating a confirmation:
Vendors can confirm that they have fulfilled their orders
Employees can confirm the goods and services they ordered via their shopping baskets
Central goods recipients can confirm the goods and services ordered by employees for whom they are responsibleconfirmation
Logistics - General (LO)
Information from the vendor to the recipient about the status of the purchase order.
The term confirmation covers different types of information from the vendor to the customer, such as order, loading or transportation confirmation and the shipping notification.
If materials planning takes place without a confirmation, planning can only be based on the delivery dates and quantities in the purchase order. In contrast, confirmations make it possible for the customer to plan the materials more precisely because between the purchase order and planned delivery date, more reliable information has become available.
Logistics - General (LO)
Communication sent by a vendor to a customer regarding the status of a purchase order.
The term "confirmation" (short for "vendor confirmation") is an umbrella term for various types of information provided by a vendor to a customer, including order acknowledgments, loading or transport confirmations and shipping notifications.
If the customer's materials planning and inventory control system does not work with confirmations, it can only refer to the delivery dates and quantities set out in the purchase order. The use of confirmations, on the other hand, makes the materials planning and inventory control process more precise, since between the PO date and the planned delivery date the customer receives increasingly reliable information about the pending arrival of ordered goods.
Treasury Management (TR-TM)
After concluding a financial transaction, a confirmation of the related contract data is sent to the relevant business partner. Confirmations can be printed or sent electronically directly from the R/3 System. Confirmation forms are defined via the correspondence type.
Logistics - General (LO)
Part of order monitoring, this documents the processing status of operations or sub-operations. In the SAP System, a distinction is made between partial and final confirmations.
A final confirmation is used to determine
at which work center the operation should be carried out
who has carried out the operation
the quantities of yield and scrap quantities that have been produced
the size of the standard values required for the actual operation
Materials Management (MM)
Communication from a vendor to a customer providing information on the status of a purchase order.
As used in this sense, the term "confirmation" can cover a number of different documents, such as order acknowledgment, loading confirmation, or shipping notification. Also termed "order acceptance/fulfillment confirmation".
If the materials planning and control system operates without such confirmations, it can only work on the basis of the delivery dates and quantities in the purchase order. Confirmations, on the other hand, enable the customer to plan more exactly. In the period between the issue of the PO and the planned delivery date he is provided with more up-to-date and increasingly reliable information on the expected delivery.
Project System (PS)
A confirmation is a part of network control. It documents the state of processing for network activities and activity elements. There are two types of confirmations in the R/3 System: partial and final confirmations.
A confirmation is used to record:
the work center where the activity was carried out
the person who carried out the activity
the yield and scrap produced in an activity
the actual values for the standard times
Intellectual Property Management (CRM-IM-IPM)
A report made by the licensee and defined in the rights sale contract on sales volumes or other quantities (such as audience figures for a film) during a period.
Receiving (ECO-BBP-REC)
An electronic document that combines the functions of goods receipts and service entry sheets. By creating a confirmation:
Vendors can confirm that they have fulfilled their orders
Employees can confirm the goods and services they ordered via their shopping baskets
Central goods recipients can confirm the goods and services ordered by employees for whom they are responsible -
Could not find any content hosted eligible apps
Hi....
my X-code version is 5.0, IOS version is 7.0
I created test user and test products in in app purchase option under my application in itunes connect. I want to display content for each test products when user buy my free products. For displaying content i followed the below process:
Creating App Store Hosted Content:
In order to have the App Store host your content, the content must first be put in a package.
Notes:
Before starting the steps below, login to iTunes Connect, create a "Free Subscription" in-app purchase, and select "Yes" for
"Hosting Content with Apple" for that purchase.
Creating Xcode In-App Purchase Content projects :
1).Created a .txt file and .jpeg file
2).Start by selecting File > New Project from the menu, and choosing In-App Purchase Content:
3).Enter the Product Name and Company Identifier such that the Bundle Identifier matches the Product ID you entered in iTunes Connect for this product.
4).Now you will have a blank In-App Purchase Content project. You can right-click and Add Files... or drag them into the Project Navigator. Ensure that the ContentVersion is correct (it should start at 1.0, but if you later choose to update your content, remember to increment it).
This window shows Xcode with the content files included in the project and the plist entries visible in the main window:
5).Once you have added all your content files you can save this project and edit it again later, or begin the upload process.
Uploading .PKG Files :
6).The easiest way to upload content packages is with the Xcode Archive Tool. Choose Product > Archive from the menu to begin:
The content package will then appear in the archive in new window. Notice the archive type and icon show this is an In-App Purchase Content Archive. Click Validate... to check our content package for errors without actually preforming the upload.
7).Login with your iTunes Connect credentials:
At step 7 when i go for validate the archive I'm getting the below error
"Could not find any content hosted eligible apps"
Please guide me why am getting the above errorYou are better of asking questions like this in the developer forums : https://devforums.apple.com/index.jspa
-
Could not find any capable video play modules upon startup.
After installing Premier Pro CC, I received this error message (also pictured below): "ADOBE PREMIER PRO STARTUP ERROR. Adobe Premier Pro could not find any capable video play modules. Please update your video display drivers and start again."
And here is an Adobe help page that offers four solutions to this issues, Error "Premiere Pro could not find any capable video play modules" | Startup. But I'll be honest, I feel like I need my hand held through solutions 2-4. I know nothing about video adapter drives, AMD Radeon cards or BIOS setup.
Could someone here expand upon these solutions for me? It would be much appreciated.
FWIW, I'm on a MacBook Pro, OS X 10.9.4, 2.6 GHz Intel Core i5 processor, 8 GB 1600 MHz DDR3 memory, and Intel Iris graphics.
Thanks
HarrySo according to Apple, Premiere Pro simply cannot run on my laptop. It does not have and never will have a "Adobe-certified GPU card for GPU-accelerated performance".
Adobe, is this true? -
I have a late 2013 MacBook Pro Retina with NVIDIA GeForce GT 750M 2048 MB.
Ever since the Premiere CC 2014 update, on launch, I get this error right after it shows "ExporterQuickTimeHost.bundle" loading (I tried removing this, but it still did it, so I don't think it has anything to do with the QuickTime plugin):
Adobe Premiere Pro Startup Error
Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again.
I never got this in the CC version. I have the latest CUDA driver: version 6.0.46 & GPU Driver: version 8.26.21 310.40.35f08
The computer is unusable for about 4-5 mins after this happens until it all clears up. This whole process takes up 7-8 mins!
This same thing also happens with Prelude CC 2014.
If anyone knows what's going on I would be very grateful.
Thanks, MazI found a solution that worked for me. Seems to be a permissions problem. Here's the solution I found (found it here: CC 2014 startup issues : Adobe Premiere Pro):
In the finder menu click and hold on the GO menu. Hold the option button and the User library will show up. Click the User Library.
In that folder go to preferences and find the adobe folder.
Right click on adobe folder and click get info.
In the Sharing & Permissions section there should be three names.
All should say Read & Write next to them.
Unlock the lock, switch them all to read and write.
Then click on the little gear directly under the names or to to the left of the lock and in the pulldown click on "apply to enclosed items.
Then lock the lock again.
Now go to your OS Hardrive and click on Users, your user name, Documents.
Find the adobe folder there.
Right click on adobe folder and click get info.
In the Sharing & Permissions section there should be three names.
All should say Read & Write next to them.
Unlock the lock, switch them all to read and write.
Then click on the little gear directly under the names or to to the left of the lock and in the pulldown click on "apply to enclosed items.
The lock the lock again.
Wait 1 minute. Then launch Premiere.
This fixed it for me. -
Debuging mapping - error : Could not find test data for target operators ?
Hello, Please help me.
I use Oracle Warehouse Builder 10gR2.
I created a cube with two dimensions.
I debugged the mappings of these two dimensions then viewed their data after deployment.
I tried to debug the mapping of the cube, and got the error: Could not find test data for all source and target operators.
For source objects exist test data but for the target operator (cube_out) logically we do not need test data !!!! .
But the error is here: Could not find test data for target operators. Why ??
How to configure or explain to owb that the target operator do not have test data ????
I need your help.
thank you in advance.Sorry, I can not understand your approach ?
I explain you in detail : I work in ROLAP.
I have two dimensions : DIM_1 and DIM_2 linked with the cube (Fact_table).
I have three mappings : MAP_DIM1, MAP_DIM2, MAP_CUBE.
For the MAP_CUBE, I have source operator : VIEW_IN and Target operator : CUBE_OUT.
I could see the data dimensions : DIM_1 and DIM_2 after debugging and Deployment in the OLAP schema.
I tried debugged the mapping: MAP_CUBE so I got the error: Could not find test data for all source and target operators.*
thank you for help. -
Ad Hoc Query - While executing - System could not read any data
Hello Techies,
When I am excuting my Ad hoc query - for one personnel number for which Infotype 28 subtype 0001 has been maintained
But system is throwing this error -
System could not read any data
Message no. AQ_AD_HOC226
Diagnosis
There is no data available for the specified selections.
System response
The results list in the lower part of the screen still displays the last list to be created.
Please let me know why does it happening ?
Thanks
JaydeepIt was an date selection issue - as while executing the Ad hoc query - the reporting date is today -
changed to all -
Hola: Después de haber estado leyendo bastante acerca del error
Adobe Premiere Pro no pudo encontrar ningún módulo capaz de reproducir vídeo. Actualice los controladores de visualización de vídeo y vuelva a empezar.
No he encontrado ayuda sobre cómo solucionar este problema en un ordenador Mac Book Pro dotado de tarjeta gráfica Intel Iris Pro 1536 MB.
¿Podría alguien ayudarme a solucionarlo?
Muchas gracias.
Hello: After having reading a lot about this error:
Premiere Pro could not find any capable video play modules
I haven't found any help about how to solve this problem on a Mac Book Pro computer with an Intel Iris Pro 1536 MB graphic card.
Can anybody help me to solve it?
Thank you very much.Dual video problems - Do you have dual graphics adapters?
IF YES, read below
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2
-Mac Utility for dual adapters http://forums.adobe.com/thread/1017891?tstart=0 -
"Adobe Premiere pro could not find any capable video play modules"!!!
premiere pro cs6 tells me thatit "could not find any capable video play modules" and tells me to update my video display drivers(they are of the latest version - I checked)-. I have AMD RADEON HD 6750 with 1GB dedicated RAM. What do I have to do to make premiere pro cs6 work?
http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-
Could not find any capable video play modules [edit]
When I try to launch Adobe Premiere Pro CS6 , I receive the following error:
Adobe Premiere Pro Startup Error
Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again.
[Title edited for clarity... Mod]More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
•What is your exact brand/model graphics adapter (ATI or nVidia or ???)
•What is your exact graphics adapter driver version?
•Have you gone to the vendor web site to check for a newer driver?
•For Windows, do NOT rely on Windows Update to have current driver information
•-you need to go direct to the vendor web site and check updates for yourself
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
Dual video problems - Do you have dual graphics adapters?
Go to the Windows Control Panel and select Hardware and Sound and then select Device Manager... In Device manager you click the + sign to the left of Display Adapters... and see if 2 are listed
IF YES, read below
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2
Maybe you are looking for
-
Hi I am getting 6 digit number from the source. ex 103924 in the target i want 1039.24 Please tell me is there any standard function for this and tell me how to use it. regards venkat.
-
Hi. The trackpad on my iBook G3 works intermittently. When it isn't working I can still move the cursor slightly (half an inch with what seems like five minutes of furious effort) and the "click" part of the trackpad works. I tried using a USB mouse,
-
Lightswitch HTML Sharepoint App: Access Control Methods
I have a Lightswitch HTML SharePoint App. Which is working well. I have implemented user access security on the entities using SharePoint groups. partial void UserAccessGroups_CanUpdate(ref bool result) result = false; var clientContext = Application
-
Why has Safari become so unstable?
Lately, Safari crashes within minutes, almost every time I use it. It crashes on an unpredictable array of websites (apple.com, nytimes.com, facebook.com). It will crash even when its not the active window. I don't remember when this began, but I rec
-
Scanned images makes pages slow, causes crash
I have a 40 page document into which I have scanned about 15 pages. The Pages doc is 388mb and is slow to open, in fact it pretty much just crashes at this point. I managed to export it to Word and the same doc. is only 2.3mb and opens easily and I c