Could not find .java and .class files...

I am working on Windows Vista operating system.
I am able to access the .java which I created and also .class files from the command prompt.
But I am not able to find those files in the bin folder in Windows Explorer.
I want to delete some .java and .class files. When I use the delete command on the command prompt , I am getting ---- could not find the file.
Can anyone help me...

Hey everyone,
I found the answer!
If the command prompt application is run as administrator(since it is windows vista), the created .java files as well as .class files will be stored and can be seen in the bin folder.
However, I could not locate the .java files (and also corresponding .class files) which I created previously.

Similar Messages

Error: "Could not find the main class: Files\NetBeans"

I am working on a WorldWind mapping application but I think this issue is more of a straight Java question. I was attempting to add a web service reference by means of the NetBeans IDE. The reference compiled as it should have but then the application would not run. I deleted the reference, commented out all the code that used the web reference, basically restored all the code to how it was before trying to add the web service. The applicaiton still will not run with the message that it can't find the main class. I do, however, get a clean build. What should I do to fix this?
Here is the error: "Could not find the main class: Files\NetBeans"
thanks!

nigel25840 wrote:
I am working on a WorldWind mapping application but I think this issue is more of a straight Java question. I was attempting to add a web service reference by means of the NetBeans IDE. The reference compiled as it should have but then the application would not run. I deleted the reference, commented out all the code that used the web reference, basically restored all the code to how it was before trying to add the web service. The applicaiton still will not run with the message that it can't find the main class. I do, however, get a clean build. What should I do to fix this?
Here is the error: "Could not find the main class: Files\NetBeans"
thanks!Sounds like something (a .cmd file or .bat file, perhaps) is set up to launch NetBeans with a command line like this:
java -classpath ... c:\Program Files\NetBeans ...
So since the path has embedded space(s) in it, it thinks you are wanting to run a class named "Files\NetBeans", which does not exist.
You need someone there who knows what they are doing to look into it for you.

Execute jar file: "could not find the main class" program will terminate

Hey,
I am new to Java. I have started to make a small java program which supposed to help me at my studies to lean the Dominic Memory System. I have used the latest version of Netbeans 5.5.1 to build my program in. I have two problems which I cannot figure out how to solve, please help me.
The first problem is that the java script I have made works when I compile it in Netbeans, but when I create a Jar file it does not work. I receive a pop up message in windows ?could not find the main class program will terminate? when I execute the jar file.
The second problem I have is that I need to compare the strings generated by the "numbers" and "TIP" and if the numbers is not identical the numbers in the ?Center? JPanel should be highlighted as red.
If anyone would like to clean up the code I would be pleased. I have copied quite a lot from anyone because of my one lack of knowledge.
* GoListener.java
* Created on 12. september 2007, 21:48
* To change this template, choose Tools | Template Manager
* and open the template in the editor.
package grandmaster;
import java.awt.event.*;
import javax.swing.*;
import java.util.Vector;
import java.util.StringTokenizer;
import java.awt.Color;
* @author Computer
public class GoListener implements ActionListener {
private JTextField viewer;
private JTextField TIP;
private JTextField freq;
private JTextField max_num;
private Vector numbers;
public GoListener(JTextField j,JTextField k, JTextField m, JTextField f, Vector n) {
freq = f;
max_num = m;
viewer = j;
numbers = n;
TIP = k;
public void actionPerformed(ActionEvent e){
int time = Integer.valueOf(max_num.getText());
int f = Integer.valueOf(freq.getText());
if (e.getActionCommand() == "GO") {
for (int i = 0; i< time;++i) {
int number=0;
number = (int)Math.floor(100*Math.random());
while(number>51){
number = (int)Math.floor(100*Math.random());
if(number<=9){
viewer.setText(" "+"0" + String.valueOf(number) + " ");
} else{
viewer.setText(" " + String.valueOf(number) + " ");
viewer.paintImmediately(viewer.getBounds());
numbers.add(number);
try {
Thread.sleep(f*1000);
} catch (Exception exp) {
viewer.setText(" XX ");
viewer.paintImmediately(viewer.getBounds());
if (e.getActionCommand() == "VIEW") {
try {
//int numb = Integer.valueOf( TIP.getText() ).intValue();
StringTokenizer tokenizer = new StringTokenizer(TIP.getText(), " ");
String[] split = null;
int tokenCount = tokenizer.countTokens();
if (tokenCount > 0) {
split = new String[tokenCount];
for (int current = 0; current < tokenCount; current++) {
split[current] = tokenizer.nextToken();
viewer.setText(" " + String.valueOf(numbers) + " ");
// k=numbers(1);
/*while(c<i){
String.valueOf(k).equals(split[1]);
c++;
TIP.setText(" " + split[2] + " ");
} catch (Exception exp) {
try {
//string testit = numb.toString();
//String str = "" + numb;
//viewer.setText(str);
//viewer.setText(numbers.toString());
numbers.clear();
} catch (Exception exp) {
* Main.java
* Created on 12. september 2007, 21:07
* To change this template, choose Tools | Template Manager
* and open the template in the editor.
package grandmaster;
import java.util.Vector;
import javax.swing.*;
import java.awt.event.*;
import javax.swing.JButton;
import java.awt.*;
import grandmaster.GoListener;
* @author Computer
public class Main extends JFrame {
private JTextField viewer;
public JTextField TIP;
// private TextInputPanel TIP;
private Vector numbers;
/** Creates a new instance of Main */
public Main() {
numbers = new Vector();
JPanel p = new JPanel(new GridLayout(0,4));
JButton go = new JButton();
JButton view_num = new JButton();
go.setText("Go!");
go.setVisible(true);
go.setActionCommand("GO");
view_num.setText("VIEW");
view_num.setVisible(true);
view_num.setActionCommand("VIEW");
JTextField max_num = new JTextField();
max_num.setText("5");
JTextField freq = new JTextField();
freq.setText("1");
viewer = new JTextField();
viewer.setText("XX");
TIP = new JTextField("");
p.add(go);
p.add(max_num);
p.add(freq);
p.add(view_num);
getContentPane().add(p,BorderLayout.NORTH);
getContentPane().add(viewer,BorderLayout.CENTER);
getContentPane().add(TIP,BorderLayout.SOUTH);
setSize(200,200);
GoListener g = new GoListener(viewer,TIP,max_num, freq, numbers);
go.addActionListener(g);
view_num.addActionListener(g);
* @param args the command line arguments
public static void main(String[] args) {
// TODO code application logic here
Main window = new Main();
window.setVisible(true);
}

NetBeans questions should be posted to the NB site. It has mailing lists and associated forums.
This tutorial from the NB site addresses running programs outside of NB
http://www.netbeans.org/kb/articles/javase-deploy.html
When you compare objects, use ".equals()" and reserve == for comparing values.

Executable JAR file: Could not find the main class.

Hello,
I have a problem with making an executable JAR file.
I have written a JAVA program that consists of five different classes of which User.java is the main class and I have saved a text document with Main-Class: User and a blank line after that.
If I try:
jar cmf MainClass.txt User.jar User.class Beheerder.class Operator.class Manager.class MaakVisueelSchema.class
it makes a executable jar file which actually works! :)
But when the Operator class trys to open the MaakVisueelSchema class the screen stays blank.
I can run MaakVisueelSchema with java MaakVisueelSchema.
So I tried to make an executable JAR that consists only of MaakVisueelSchema, the same way as I did for User:
Main-Class: MaakVisueelSchema
jar cmf MainClass.txt MaakVisueelSchema.jar MaakVisueelSchema.class
Then I get the error message:
Could not find the main class. Program will exit.
from the Java Virtual Machine Launcher.
The big difference between MaakVisueelSchema and the other classes is that MaakVisueelSchema contains a PaintComponent method and an ComponentListener. Is it possible that one of those creates the error?
Can anyone help me with this problem?
Thanks in advance!
Bye!

Yes,
I tried:
jar xvf MaakVisueelSchema.jar
and it returns:
META-INF/
META-INF/MANIFEST.MF
MaakVisueelSchema.classN/G. You need to manually create a manifest file in a text editor, have it point to your main class, and enter it in your jar command as an argument.

JAR file: could not find the main class.

I have been working with Java satisfactorily for about two years.
Installed a bigger hard disk.
Installed Windows XP.
Downloaded java.
Downloaded java jdk 1.6.0_07
Downloaded java3d 1.5.2
Downloaded Eclipse Ganymede.
A new project, a new class with an existing and working java file. It did function in eclipse.
Generated a jar file with:
Export \ JAR FILE \ select files and the destination for the Jar file .....
... next...next filled the field Main Class
This generates the jar files, which have worked before.
And now the error: could not find the main class.
Thand you for your help.

Executing a jar file means it will not read from the CLASSPATH environment variable. I learnt this the hard way a few weeks ago and I had to resort to different measures to work around it.
Your problem does sound weird, but check that the last line in your manifest file is a new line. If it's not, the manifest is not read and parsed correctly.
To test, do this: remove everything from the manifest that you don't need, except the Manifest-Version and Main-Class attributes. Make sure the last line is a new line, and see if it works.
Cheers

Error:-could not find the main class programe will exit(Java virtual mach)

Hi,
i changed the mainfest file for an executive jar file(judge.jar) using the command on dos :-"jar cvfm judge.jar c:\judge\MAINFEST.MF -C judge/ ." , but when i run this jar file again after making changes in mainfest file it is not working. an error encounter like "could not find the main class programe will exit how to solve"(Java virtual machine launcher).please suggest me how to solve this error.
Thanks
Ashwani Gupta

Hi,
mainfest file has a entry like "main -class: judge.repository.corpus"
please tell me the solution of this error i am doing internship in national university of singapore......and my project is related to data mining.I am using judge.jar when i extract this jar files i saw there was no main-class in manifest file so i change it and make it again jar file using dos command.please suggest me how i can reomove this error.
Thanks in advance.
Ashwani

The manifest file "could not find the main class."

The main class file is inside a folder in the created Jar file, but is not in a package. But when I double-click the Jar file, it says it could not find the main class. I am using Windows. I have tried each of the following lines in the manifest, but none are working:
Main-Class: Installer
Main-Class: setupFiles/programFile/Installer
Main-Class: setupFiles\programFile\Installer
Main-Class: setupFiles.programFile.InstallerThe main class is inside the setupFiles/programFile directory. Please Help!
Thanks in advance,
~ Tom

Hi Tom,
The main class file is inside a folder in the created
Jar file, but is not in a package. This is the problem. A JAR file is not an arbitrary ZIP file, where you can arrange directories as you like. The structure of a JAR file always has to follow the package structure. So your Installer class must be on the top level and not in directory setupFiles/programFile.
You might add non-class files in other directores and can access them as resources, but you have to put the class files into their "natural" directories.

Could not find the main class. & java.lang.NoClassDefFound error:

sir / madam
I am facing problems with j2ksdk1.4.0 beta instalation on my windows 2000 advance server.
while installing pops up a message saying could not find the main class.
while using java or javac it says
Exception in thread main
java.lang.NoClassDefFound error:
com/sun/tools/javac/main
even when double clicking java plugin from the control panel
I get the Java virtual machine launcher saying could not find the main class.
I don't have any other java sdk installed.
And i have my environment variables (classpath, path and java_home) set correctly.
this same j2sdk1.4.0 version is installed in the windows 98 system and it's working fine.
Kindly do help me to solve this problem.
eagerly awaiting for your response.
Thanking you
Sajeev Nair
[email protected]

you must check with the classpath
please see that you have not repeated %classpath%
at the end of the class path like you do in win98.
similiarly with %path%
in win2000 it is automatically taken care off.

Java Virtual Machine Launcher could not find the main class - program will

I have installed J2SE and followed all the instructions but upon restarting the PC I get a dialogue box with the messege Java Virtual Machine Launcher could not find the main class - program will exit.
I have tried multiple times un-installing and re-intalling this but i still get the messege when i restart windows.
Can anyone offer any suggestions as to what i may be doing wrong.
When I do the verify installation I get the congtratulations you have the latest Java Installed.
Help

Something is being automatically started when the pc starts. Assuming Windows, to see what it is, learn to use the msconfig program:
http://www.google.com/search?q=how+to+use+msconfig
Apparently, whatever it is, it's not correctly configured.

How do I install Netgear XE102 on my iMac? It will not install off of the cd provided it appears to be only for Windows based computers. Checked Netgear website and could not find a setup.exe file for Mac.

Unable to install Netgear XE102 on my iMac. Checked Netgear website and could not find a setup.exe file for Mac.

That means either no software needs to be installed on a Mac or the product is incompatible with Macs. Contact NetGear tech support for help.

Java Access Bridge 1.1 Could not find the main class

When I try to load Java Access Bridge 1.1 I receive the following error:
Could not find the main class. Program will exit.
Does anyone know why?

you must check with the classpath
please see that you have not repeated %classpath%
at the end of the class path like you do in win98.
similiarly with %path%
in win2000 it is automatically taken care off.

"Java Virtual Machine Launcher- could not find the main class"

My system is working very slowly, especially during start-up.
During the start-up, a small pop-up appears that reads:
"Java Virtual Machine Launcher
could not find the main class. Program will exit"
Would this cause slow operation?
How do I fix this?
My system is Windows XP Professional, version 2002 SP1; Intel Pentium III Processor, 647 MHz, 128 RAM
Thanks for whatever help you can offer.
Lou
My experience level is
Beginner
Novice
Intermediate X
Expert
Guru

That popup message indicates that some program has tried to start the Microsoft JVM. When this occurs at startup, it often means that a spyware (or worse) program is operating. Go to this Sun site for more information.
http://java.com/en/download/help/spyware.jsp

Could not find the main class: oracle.ide.boot.Launcher. Program will exit

Hi,
I have installed Oracle11g_win64_11gR1, Database and Client.
The issue is unable to invoke "sqldeveloper", getting the following error message. Could you please help ?
FYI. I have already downloaded and installed installed JRE and JDK.
ie. C:\Program Files (x86)\Java\jre6\ and C:\Program Files\Java\jdk1.6.0_24, still did not work.
C:\Users\oracle>java -version
java version "1.6.0_24"
Java(TM) SE Runtime Environment (build 1.6.0_24-b07)
Java HotSpot(TM) 64-Bit Server VM (build 19.1-b02, mixed mode)
Let me know, if you need more information. Here is the error message.
Error Message
=========
(1) if I invoke sqldeveloper, directly from the location " C:\app\oracle\product\11.1.0\db_1\sqldeveloper\sqldeveloper\bin " using explorer, I do get error message
"Unable to find a java Virtual Machine.
To point to a location of java Virtual machine please refer to the Oracle9i JDeveloper Install Guide ( jdev/install.html)"
(2) if I invoke sqldeveloper, directly from the locationC:\app\oracle\product\11.1.0\client_1\sqldeveloper, it prompts me to enter "full path for java.exe".
When I enter full path and continue, still it continue to prompt and ask the same input.
(3) if I invoke sqldeveloper from from command prompt using the batch file "sqldeveloper.bat"
C:\Users\oracle>C:\app\oracle\product\11.1.0\client_1\sqldeveloper\sqldeveloper\
bin\sqldeveloper.bat
C:\Users\oracle>java -Xmx512M -Xverify:none -XX:JavaPriority10_To_OSPriority=10
-XX:JavaPriority9_To_OSPriority=9 -Doracle.ide.util.AddinPolicyUtils.OVERRIDE_F
LAG=true -Dsun.java2d.ddoffscreen=false -Dwindows.shell.font.languages= -Dide.co
nf="sqldeveloper.conf" -Dide.home.dir.name=.sqldeveloper -classpath ..\..\ide\l
ib\ide-boot.jar;..\..\jdev\lib\xmleditor.jar;..\..\ide\lib\oicons.jar;..\..\..\j
dbc\lib\ojdbc5.jar;..\..\jlib\jewt4.jar;..\..\jlib\share.jar;..\..\sqldeveloper\
lib\jle2.jar oracle.ide.boot.Launcher
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/ide/boot/Launc
her
Caused by: java.lang.ClassNotFoundException: oracle.ide.boot.Launcher
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
Could not find the main class: oracle.ide.boot.Launcher. Program will exit.
OS
==============
MS Windows 7 Home Premium
sqldeveloper.conf
===================
SetSkipJ2SDKCheck true
IncludeConfFile ../../jdev/bin/ide.conf
AddVMOption -Dapple.laf.useScreenMenuBar=true
AddVMOption -Dcom.apple.mrj.application.apple.menu.about.name="SQL_Developer"
AddVMOption -Dcom.apple.mrj.application.growbox.intrudes=false
AddVMOption -Dcom.apple.macos.smallTabs=true
AddVMOption -Doracle.ide.util.AddinPolicyUtils.OVERRIDE_FLAG=true
AddJavaLibFile ../../jdev/lib/xmleditor.jar
AddJavaLibFile ../../ide/lib/oicons.jar
AddJavaLibFile ../../jlib/jewt4.jar
AddJavaLibFile ../../jlib/share.jar
AddJavaLibFile ../ide/jlib/xmlef.jar
AddJavaLibFile ../../sqldeveloper/lib/jle2.jar
AddJavaLibFile ../../sqldeveloper/lib/oracle.dbtools.logging.jar
AddVMOption -Dsun.java2d.ddoffscreen=false
AddVMOption -Dwindows.shell.font.languages=
IncludeConfFile sqldeveloper-nondebug.conf
SetJavaHome C:\Program Files\Java\jdk1.6.0_24
Edited by: sivapara on Feb 16, 2011 1:08 PM

I was able to resolve this issue by performing following.
1. Go to the location where sqldeveloperW.exe is being executed from.
2. You will find a file sqldeveloper.conf in that location. Edit this file and change the value of IncludeConfFile to point to actual place. For me following were old and new values.
OLD (Wrong) : IncludeConfFile ../../jdev/bin/ide.conf
NEW (Correct) : IncludeConfFile ../../ide/bin/ide.conf
After making above change in the sqldeveloper.conf file. Save and close it. Restart SQLDeveloper. You will not get the error anymore.
Thanks
Ravi

Could not find the main class (with every jar)

This isn't a developer question. I get the error Could not find the main class with every jar I try to open (for example the jar downloaded from https://gjar.dev.java.net/ gives the same problems - and I don't think there is something wrong with that JAR). It isn't a problem with the jar or MANIFEST because the same jar works fine on my laptop. So there is something wrong with my JRE installation, but what?
I tried to remove and reinstall the JRE 6 Update 18 but that didn't work. When I run the JAR with command line java -jar "file.jar" it works fine, but if I dubbelclick on it I get the error message (and it's irritating me).
I'm a bit desperate so I hope that someone here can help me ;)
Thanks in advanced

hai T.B.M ... Sorry to post here... I know that i posted my question in wrong thread..but i dont have another solution to contact with you.. I had seen your answers which are really excellent and helped to do my project..
Now i am having very less time to complete my project and i am very new to JMF.. I am not getting output in JMF video capture ..please check the code and guide me where i gone wrong.......please pardon me once again to post here.. Heres my code
import javax.media.*;
import java.awt.*;
import javax.swing.*;
import java.util.*;
import java.awt.event.*;
import javax.media.protocol.*;
import java.io.*;
import javax.media.control.StreamWriterControl;
public class webcam implements ActionListener,ControllerListener
boolean eomReached = false;
boolean realized = false;
JFrame f;
BorderLayout bd1;
CaptureDeviceInfo device;
MediaLocator m1;
Player player;
Component videoScreen;
JButton b1,b2;
Processor processor;
DataSource ds=null;
DataSink fileWriter=null;
JLabel status=new JLabel("");
public webcam()
try
JFrame f=new JFrame();
JPanel p =new JPanel();
JPanel p1=new JPanel();
device=CaptureDeviceManager.getDevice("vfw:Microsoft WDM Image Capture (Win32):0");
m1=device.getLocator();
System.out.println("1");
processor.configure();
processor = Manager.createProcessor(m1);
processor.setContentDescriptor(new
FileTypeDescriptor(FileTypeDescriptor.MSVIDEO));
ds=processor.getDataOutput();
player.addControllerListener(this);
MediaLocator dest = new MediaLocator("file://foo.avi");
fileWriter = Manager.createDataSink(ds, dest);
fileWriter.open();
ds.connect();
ds.start();
player=Manager.createPlayer(m1);
player.addControllerListener(this);
blockingRealize();
videoScreen=player.getVisualComponent();
b1=new JButton("START");
b2=new JButton("STOP");
bd1=new BorderLayout();
p.setLayout(bd1);
p1.add(b1);
p1.add(b2);
p.add("South",p1);
p.add("East",videoScreen);
f.getContentPane().add(p);
f.setVisible(true);
f.setSize(500,500);
f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
b1.addActionListener(this);
b2.addActionListener(this);
catch(Exception e){}
public void actionPerformed(ActionEvent e)
if(e.getSource()==b1)
try{
processor.start();
player.start();
fileWriter.start();
catch(Exception e1){}
if(e.getSource()==b2)
try{
player.stop();
processor.stop();
processor.close();
fileWriter.close();
catch(Exception e2){}
public static void main(String args[])
webcam obj=new webcam();
public synchronized void blockingRealize() {
player.realize();
while (!realized) {
try {
wait();
} catch (java.lang.InterruptedException e) {
status.setText("Interrupted while waiting on realize...exiting.");
System.exit(1);
public synchronized void controllerUpdate (ControllerEvent event) {
System.out.println("myPlayer generated "+event.toString());
if (event instanceof RealizeCompleteEvent) {
realized = true;
notify();
} else if (event instanceof EndOfMediaEvent) {
eomReached = true;
}

Could not find the main class: SearchExcel. Program will exit. ????

sekic0429{uabudd_milou}[w10/rbssw/2.0] pwd
/tmp/MyJava/jexcelapi
sekic0429{uabudd_milou}[w10/rbssw/2.0] printenv CLASSPATH
/tmp/MyJava/excelapi:/app/jdk/1.6.0_16/jre/lib:/app/jdk/1.6.0_16/lib
sekic0429{uabudd_milou}[w10/rbssw/2.0] ls
build ExcelSearch.java index.html resources SearchExcel.java~ tutorial.html
docs ExelSearch.java~ jxl.jar SearchExcel.class src workbook.dtd
ExcelSearch.class formatworkbook.dtd jxlrwtest.xls SearchExcel.java TestSpecification.xls
sekic0429{uabudd_milou}[w10/rbssw/2.0] javac -extdirs . ExcelSearch.java
sekic0429{uabudd_milou}[w10/rbssw/2.0]
sekic0429{uabudd_milou}[w10/rbssw/2.0] java ExcelSearch
Exception in thread "main" java.lang.NoClassDefFoundError: ExcelSearch
Caused by: java.lang.ClassNotFoundException: ExcelSearch
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
Could not find the main class: ExcelSearch. Program will exit.
sekic0429{uabudd_milou}[w10/rbssw/2.0] cat ExcelSearch.java
import java.io.File;
import java.io.IOException;
import java.util.Date;
import jxl.*;
import jxl.read.biff.BiffException;
public class ExcelSearch
public static void main(String[] args)
try
Workbook workbook = Workbook.getWorkbook(new File("TestSpecification.xls"));
catch (IOException e)
e.printStackTrace();
catch (BiffException e)
e.printStackTrace();
Regards Peter, hope for answer

r035198x wrote:
Where is SearchExcel.class?Excellent question, though I think I spotted a problem with the cp supplied.
Note the documentation for -cp state (in part)
For example, if directory foo contains a.jar and b.JAR, then the class path element foo/* is expanded to a A.jar:b.JAR, except that the order of jar files is unspecified.So instead of this..
java -cp /tmp/MyJava/excelapi:/app/jdk/1.6.0_16/jre/lib:/app/jdk/1.6.0_16/lib SearchExcel..try this..
java -cp /tmp/MyJava/excelapi/*:/app/jdk/1.6.0_16/jre/lib:/app/jdk/1.6.0_16/lib SearchExcelNotes:
1) Adding the JRE classes to the classpath should not be necessary, but I left the rest of the cp unaltered to highlight the one specific difference I am suggesting.
2) When posting code, code snippets, HTML/XML or input/output, please use the code tags. The code tags help retain the indentation and formatting of the sample. To use them, select the sample text and click the CODE button.
If that still fails, tell us more specifically where the SearchExcel class is by copy/pasting the output (within code tags) of the command..
prompt>jar -tvf mysearchexcel.jarWhere, of course, you replace 'mysearchexcel.jar' with the actual Jar name it is supposed to be located in.
Edit 1:
Changed JavaDocs -> documentation.
Edited by: AndrewThompson64 on Jan 11, 2010 7:12 PM

Could not find .java and .class files...

Similar Messages

Maybe you are looking for