Could not find the entry point in the procedure sqlite3_wal_checkpoint sqlite3.dll dynamic link library., Could not find the entry point in the procedure sqlite3_wal_checkpoint sqlite3.dll dynamic link library.
Could not find the entry point in the procedure sqlite3_wal_checkpoint sqlite3.dll dynamic link library.
Could not find the entry point in the procedure sqlite3_wal_checkpoint sqlite3.dll dynamic link library.
Try uninstalling your MobileMe control panel for Windows.
Similar Messages
-
After I updated my Itunes I always get this Error:
The procedure entry point
?videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverflow @2@@***@@XZ could not be located in the dynamic link library C:\Program Files (x86)\Common Files\Apple\Apple Application Support\WebKit.dll.
And the I get:
iTunes was not installed correctly. Please reinstall iTunes.
Error 7 (Windows error 127)
I tried the following:
- Re-Installing Itunes
- Uninstalling every software from Apple deleting every registery entry and then re-installing it. (itunes, quicktime, bonjour etc.)
This error is really a pain in the ***. I run Windows 8.1. When I go back to a restore point then Itunes works again. I searched but didn't find a solution that worked for me. Please help me.
As a software engineer, I really wonder if this is 98 or 2014....Try the following user tip:
iTunes for Windows 11.1.4.62: "The procedure entry point: ?videoTracks@QTMovie@ [...] could not be located ..." error messages when launching iTunes -
I had problems with photos disappearing and being replaced by an exclamation point within a triangle. I can see the photo in the thumbnail summary but when you click on it, the screen goes black and the exclamation point within a triangle appears along with the info on the original image number (i.e., img_1120.jpg). Prior to loading Lion, I could go to Finder, enter the image number and locate the original file for that photo. I could then restore it for editing, copying into Print Shop directly, etc. That no longer works after installing Lion. How do I restore photos now? I have 100s of photos that I have been going back to the original files and restoring and I am frantic that I will no longer be able to get to the original files. Please help! Thanks
The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
What version of iPhoto? Assuming 09 or later:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
I left my iphone in a bathroom last night and it was gone this morning when it was unlocked. I notified the police and no one turned it in. How do I find where it is located? Also, how do I find my serical number? I went to itunes on my macbook but could not find a preferences or devices button. Finally, I know my password but don't know my apple id. How do I find it?
Answered here:
https://discussions.apple.com/thread/6157706?tstart=0
Don't double post.
To locate the SN:
http://support.apple.com/kb/ht4061 -
I have just installed Lightroom 5 on iMAC (OS X ver 10.9.4). When I click on 'Import' to start working on some photos, the following error message pops up: "An internal error has occurred. Could not find namespace: AgCreativeCloudUtils". Anyone know what the problem is and how to fix? Thanks.
https://forums.adobe.com/search.jspa?q=Could+not+find+namespace%3A+AgCreativeCloudUtils&pl ace=%2Fplaces%2F1383621&depth=…
-
my itunes on my laptop (not a mac) has an error message that reads "the procedure entry point_objc_load_image could not be located in the dynamic link library.objc.dll" then another window will come up telling to to uninstall the apple mobile and itunes and reinstall them? will this delete everythin in the itunes account? please help
This might help https://discussions.apple.com/thread/5821701
-
Issue: We have upgraded TFS 2013 App Server and Build Servers from TFS 2013 RTM to TFS 2013 update 4. Everything looks good but we are receiving the below error:
Could not load file or assembly 'LibGit2Sharp, Version=0.13.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
Kindly share your thoughts/inputs to resolve the issueHi John,
Hope there is nothing wrong with the update.
Yesterday, Our developers were troubleshooting the issue with the builds and found that
Build Activities dll has the reference of LibGit2Sharp.dll
version 01.12.0.3051.0. After TFS upgrade, Build activities does not have a reference for the new version of
LibGit2Sharp.dll [required] which has caused the issue in the build process.
Error: Could not load file or assembly 'LibGit2Sharp, Version=0.13.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
Resolution: New version of LibGit2Sharp.dll
was added and referenced to Microsoft.TeamFoundation.Build.Activities.dll
which has resolved the issue with the builds.
I think this should be referenced somewhere regarding TFS Update 4 so that everyone will be able to spot the issue and fix the issue without any issues. -
Hello,
I have a problem with displaying a report that
contains graphics from the Reporting Services Web
site.
This problem only occurs when I display
a page that contains a chart.
The other pages are displayed perfectly.
The error is as follows:
An error occurred During rendering
of the report.
An error occurred During rendering
of the report.
Could not load file or assembly
'DundasWebChart, Version =
9.0.242.0, Culture = neutral,
PublicKeyToken = 89845dcd8080cc91' or
one of its dependencies.
The system can not find the file specified.
It seems that the problem comes from
"DundasWebChart", but
do not know the solution.
In the Visual Basic solution perfectly
the graphics displayed on every page.
can someone please help me.
thank you very muchPreviously everything worked fine,
but in recent days has stopped working.
When I generate a report from
Reporting Services web browser, generates
the report but when accessing a page containing chart graphics I get the following
error:
An error occurred During rendering
of the report.
An error occurred During rendering
of the report.
Could not load file or assembly
'DundasWebChart, Version =
9.0.242.0, Culture = neutral,
PublicKeyToken = 89845dcd8080cc91' or
one of its dependencies.
The system can not find the file specified. -
I am getting following error message when I publish my code on server. I am using VS 2010 as development tool and we are using framework 2.0.
Could not load file or assembly 'CrystalKeyCodeLib, Version=9.1.5000.0,
Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies.
The system cannot find the file specified.I was the error from my side I was refering wrong DLL.
-
I just downloaded more then 2000 photo's from my NIKON camera into iPhoto. Shortly after that my battery life was depleted and so I plugged the computer back into power and after I opened iPhoto later, I could not find those photos anymore!! Help where are they? How can I retrieve them or are they lost???
Please help me!!!Do you see more photos, when you enable "Hidden Photos" in the "View" menu?
And that was afetr I took the connection with the NIKON out of my laptop.
Check, if you really imported into your iPhoto library - is the preference setting "Advanced > Importing: Copy items to the iPhoto Library" active? If not, connect your Nikon again - do you now see more photos?
If you imported into the iPhoto Library, check inside the package:
Select your iPhoto library in the Finder, ctrl-click it, use the command "Show Package Contents".
There will be a folder named "Masters" inside, with subfolders named by year - month - day. Look for the date you did the import and check, if the photos are inside.
If yes, copy this folder to a folder on your desktop to save the photos.
If not, search for a folder "Importing" inside the library. Is it there? Then copy these photos to a folder on the Desktop.
If you found your photos, backup and rebuild your library.
See Old Toad's post here: Rebuild iPhoto Version 11 -
HELP i just could not figure out how to find the answers to my security questions, and i do believe that the questions used to be "who was your first teacher" and "who was your favorite teacher" but now the second one is "where did you and your partner go on there first trip together, so now i'm wondering if i dont even have the answers anymore! why, have you changed the questions, and i really am having trouble following the help pages. i need help, it wont let me buy any songs or apps, so i've been saving the links and names to songs.
We are fellow users on these forums, you're not talking to Apple or iTunes Support.
If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then steps 1 to 5 on the page that you posted from should let you reset them : go to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account, then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you should see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you won't get the reset option - you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the page that you posted from to add a rescue email address for potential future use. -
i delete my iphone from find my i phone and now i want to make active my i phone i get the message your i phone could not be activated because the activation server failed i try it several time but my iphone is not activate help me fpls
Activation issues are almost always the result of a device that has been hacked or jailbroken. If that is the case, no support can be provided here.
The other possible issue is a device running the iOS7 Beta. If that is the case, and you are a developer, sign into the developers forums for assistance. If that is the case and you are not a developer, try google. -
Hello all,
I can't open a PP project without this error message appearing:
"The preset used by one or more sequences in this project requires third-party components that could not be located. These sequences will be modified to use a custom sequence setting instead. To continue editing using the original preset, quit the application without saving the project, reinstall any third-party components that are required and reopen the project".
What I had been doing before this occurred was editing a PP project using ProRes sequences and multi-camera editing. Multi-camera was not working very well and after a few attempts to fix that I gave up and finished the job cutting 3 layers of video instead. AME refused to render the three finished sequences of over 1hr duration so rendered final videos from the PP sequences.
I tried deleting plists for AME, PP and QT, repairing disc permissions and rebooting but there was no improvement.
Client is satisfied for now but will want to come back to this job at a later date so decided to uninstall and re-install AME and PP in the hope both would be ready to work properly when needed again. AME works fine in conjunction with a different PP project but now I can't open the PP project in question without the above error message appearing.
Having searched the net it would seem that the problem may be caused by ProRes but I haven't been able to find a definitive solution for the problem. Does anyone know either:
1. How to fix this?
2. If I chose the "modified using a custom sequence setting", can I be sure that my sequences will look the same even if they don't use ProRes? The final deliverable format will be mp4 so as long as the overall look doesn't change then I can afford a change in the edit codec. It's just that with three sequences over an hour long, I don't want days of work to be ruined.
Other older PP projects of mine open and work fine.
Premiere Pro CC 8.2.0
Media Encoder CC 8.2.0.54
OSX 10.10.2
Any help would be greatly appreciated.
Duncan.Adobe web chat come up with a solution.
Open the PP project.
Export your sequence or project as a Final Cut Pro XML file.
Set up a new PP project.
Import the Final Cut Pro XML file.
This will get you back up an running.
Since getting back to editing this project I have found that some things will be lost or change in using XML:
You will lose position key framing, black video clips, dissolve fx, audio levels, audio dynamic fx, the ability to open a multi camera clip and change the camera view.
You will keep cut points, crop fx.
Not perfect but only took a couple of hours to save 3 days work. -
i am in a loop. I can't get past this point OS X could not be installed on your computer. when I go to quit the installer I get are you sure you want to quit OS X installer? To quit, click choose startup disk to select a startup diskbfor your computer if you need to restart click restart. I don't have a start up disk and my time machine evidently isn't workig either. Does this mean I have lost everything??? Please someone help!!! I am not a tech person at all and am freaking out right now. How do I remove the download and just go back to what I had. Seriously!!!
Not sure what the iOS is.
iOS cannot run on any Mac computer, just Apple's mobile devices. You have some version of Mac OS X. To find it, please do "About this Mac" from your Apple menu and post what you find along wiuth the processor description.
Some iMacs cannot run newer versions of the Mac OX. That's why we need more info about your specific model. Now that you have the serial number, enter it into the Apple support page to get it translated into a model type:
https://selfsolve.apple.com/agreementWarrantyDynamic.do
Report what that says for your model BUT DO NOT post your serial number for security reasons. -
iTunes told me to delete my backup folder when I was having problems syncing my phone to my computer. After that it wouldn't work at all. After trying and trying I deleted iTunes when it said "iTunes could not back up iPhone because the backup could not be saved on the computer"and now it wont let me install it again and keeps saying "itunes cannot be installed because the file cannot be found in the cabinet ". What the **** itunes? Nothing is working!!
I wanted to update my iTunes so I could sync my phone to my computer and update my phones software so I can use the latest apps that need a 4.2 or higher.
This is not fun for me so if anyone knows what I can do to fix this please help. Is it possible to download the "cabinent file" with the lastest iTunes?
Thank you.
-Kait
My phone is the iPhone4 and my computer is a Windows VistaI doubt that corrupt files are the problem. It is more likely a space or permissions issue. Is the hard-drive on which iTunes is stored close to capacity? Do you (or the particular user profile you have logged on with) have the requisite permissions to save to that drive?
Otherwise, do you get an error code? This might point us in the right direction.
Maybe you are looking for
-
How to track the queries for a given info object
Hello All, I have info object 0COORDER, I wan to know what are list of queries built on this particular info object Full points just for solution or suggestion varsha
-
Addition of field in referencing procedure
We are trying to copy a customized field( z field in VBAK) from master contract to local contract.We are trying to add the field in the referencing procedure in transaction VORS.But there is a check for the fields allowed, in the program L081AF0C(Lin
-
Can we add display characters to Free characteristics
hi Gurus, I have a some material display attribute in the report and customer wants to add these display characters to free characteristics so that he wants to drill down with other charcters like plant. Can we add directly in query defination or do
-
Passing table to the RFC from BSP!
Dear friends, I am trying to call a RFC (on 4.6c) from a BSP page( on a 6.20 System). i am trying to pass a table from the BSP to the RFC and get the result back. This is not working as expected. The Function module at R3 (4.6c) which takes a table
-
Problems printing photographs via Aperture, using Canon MP640
When printing photographs via Aperture, using my CanonMP640, I am instructed to turn off my color management, but I don't know how to do this & Canon can't help me. The color quality is very poor (whites have a blue tinge and reds come out orange) Ca