Could not find the orgunit text in HRP 5125 in Erecrutment

Hi All,
When we look at the create requisition page (general info tab page ) we could see the org unit as well as its description.But when we look at table HRP5125 we could only see theORGID (id of organization field) but we could not see the text of the orgunit in table HRP 5125.
Could any body tell us where from the org unit text is being pulled up in the general info tab page.
Thanks and best regards
Rajeev

Hi Ravi,
The problem is resolved.thanks alot
But I now I have got another requirement.which as follows:
We need to cretae custom reports using the fields from Pa,Om and E recruitment.Is it possible,
If yes how/
Do we need to create custom infosets for the same and then proceed or there is any other method/
Please confirm
Thanks and best regards

Similar Messages

I am constantly told by Itunes that 107 items are not synching from my contacts. This is a message from the Conflict Resolver that appears whenever I synch. I try to resolve the synch and a text message pops up telling me it could not find the synch serve

I am constantly told by Itunes that 107 items are not synching from my Ipod Touch to/from Outlook Contacts. I try to resolve the issue and eventually a message pops up saying it could not be completed because it could not find the sync server. This started after one of the updates a couple of months ago. If anyone has found a similar problem and resolved it I would appreciate any assistance.
Thanks

Try here:
Advanced troubleshooting for Sync Services on Windows with Microsoft Outlook 2003, Outlook 2007, or Outlook 2010
Sync Services: Advanced troubleshooting for contact and calendar syncing

Setup problem - sql server 2014 - "could not find the database engine startup handle" - 0x851a0019

I tried to install ,deleted and re-installed several times and no help at all.
visual studio 2013 with update 2 rc and adk installed in my computer.
error code: 0x851a0019
error messege in setup: could not find the database engine startup handle
edition: Microsoft SQL Server 2014 Enterprise (Evaluation)
logs:
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893607
Start time: 2014-04-03 13:53:29
End time: 2014-04-03 14:47:48
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: ARIELUBA-PC
Machine processor count: 8
OS version: Windows 8
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered Configured
SQL Server 2012 SQLEXPRESS MSSQL11.SQLEXPRESS Database Engine Services 1033
Express Edition 11.1.3128.0 No Yes
SQL Server 2012 SQLEXPRESS MSSQL11.SQLEXPRESS SQL Server Replication 1033
Express Edition 11.1.3128.0 No Yes
SQL Server 2012 ADK MSSQL11.ADK Database Engine Services
1033 Express Edition 11.0.2100.60 No Yes
SQL Server 2012 ADK MSSQL11.ADK SQL Server Replication
1033 Express Edition 11.0.2100.60 No Yes
SQL Server 2012 LocalDB
1033 Express Edition 11.1.3412.0 No Yes
Package properties:
Description: Microsoft SQL Server 2014
ProductName: SQL Server 2014
Type: RTM
Version: 12
SPLevel: 0
Installation location: C:\Users\Arie Luba\Downloads\WS2012R2DC\SQLServer2014-x64-ENU\x64\setup\
Installation edition: Evaluation
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: NT Service\SQLSERVERAGENT
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Hebrew_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: NT Service\MSSQLServerOLAPService
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: ARIELUBA-PC\Arie Luba
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Automatic
CLTCTLRNAME:
CLTRESULTDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir\
CLTSTARTUPTYPE: Manual
CLTSVCACCOUNT: NT Service\SQL Server Distributed Replay Client
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir\
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140403_135327\ConfigurationFile.ini
CTLRSTARTUPTYPE: Manual
CTLRSVCACCOUNT: NT Service\SQL Server Distributed Replay Controller
CTLRSVCPASSWORD: <empty>
CTLRUSERS: ARIELUBA-PC\Arie Luba
ENABLERANU: false
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, DREPLAY_CTLR, DREPLAY_CLT, MDS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT Service\MsDtsServer120
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: SharePointFilesOnlyMode
RSSVCACCOUNT: NT Service\ReportServer
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: Hebrew_CI_AS
SQLSVCACCOUNT: NT Service\MSSQLSERVER
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: ARIELUBA-PC\Arie Luba
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 1
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
USEMICROSOFTUPDATE: false
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140403_135327\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: Master Data Services
Status: Passed
Feature: Distributed Replay Client
Status: Passed
Feature: Distributed Replay Controller
Status: Passed
Feature: Integration Services
Status: Passed
Feature: Data Quality Client
Status: Passed
Feature: Analysis Services
Status: Passed
Feature: Reporting Services - SharePoint
Status: Passed
Feature: Reporting Services Add-in for SharePoint Products
Status: Passed
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: Setup Support Files
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140403_135327\SystemConfigurationCheck_Report.htm
2014-04-03 14:14:28.01 Server Microsoft SQL Server 2014 - 12.0.2000.8 (X64)
Feb 20 2014 20:04:26
Copyright (c) Microsoft Corporation
Enterprise Evaluation Edition (64-bit) on Windows NT 6.3 <X64> (Build 9600: ) (Hypervisor)
2014-04-03 14:14:28.01 Server UTC adjustment: 3:00
2014-04-03 14:14:28.01 Server (c) Microsoft Corporation.
2014-04-03 14:14:28.01 Server All rights reserved.
2014-04-03 14:14:28.01 Server Server process ID is 7148.
2014-04-03 14:14:28.01 Server System Manufacturer: 'Dell Inc.', System Model: 'Inspiron N5110'.
2014-04-03 14:14:28.01 Server Authentication mode is WINDOWS-ONLY.
2014-04-03 14:14:28.01 Server Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL12.MSSQLSERVER\MSSQL\Log\ERRORLOG'.
2014-04-03 14:14:28.01 Server The service account is 'NT Service\MSSQLSERVER'. This is an informational message; no user action is required.
2014-04-03 14:14:28.01 Server Registry startup parameters:
-d C:\Program Files\Microsoft SQL Server\MSSQL12.MSSQLSERVER\MSSQL\DATA\master.mdf
-e C:\Program Files\Microsoft SQL Server\MSSQL12.MSSQLSERVER\MSSQL\Log\ERRORLOG
-l C:\Program Files\Microsoft SQL Server\MSSQL12.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
2014-04-03 14:14:28.01 Server Command Line Startup Parameters:
-s "MSSQLSERVER"
-m "SqlSetup"
-Q
-q "Hebrew_CI_AS"
-T 4022
-T 4010
-T 3659
-T 3610
-T 8015
2014-04-03 14:14:28.28 Server SQL Server detected 1 sockets with 4 cores per socket and 8 logical processors per socket, 8 total logical processors; using 8 logical processors based on SQL Server licensing. This is an informational message;
no user action is required.
2014-04-03 14:14:28.28 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2014-04-03 14:14:28.28 Server Detected 8099 MB of RAM. This is an informational message; no user action is required.
2014-04-03 14:14:28.28 Server Using conventional memory in the memory manager.
2014-04-03 14:14:28.31 Server Default collation: SQL_Latin1_General_CP1_CI_AS (us_english 1033)
2014-04-03 14:14:28.34 Server Perfmon counters for resource governor pools and groups failed to initialize and are disabled.
2014-04-03 14:14:28.36 Server Query Store settings initialized with enabled = 1,
2014-04-03 14:14:28.36 Server The maximum number of dedicated administrator connections for this instance is '1'
2014-04-03 14:14:28.36 Server Node configuration: node 0: CPU mask: 0x00000000000000ff:0 Active CPU mask: 0x00000000000000ff:0. This message provides a description of the NUMA configuration for this computer. This is an informational message
only. No user action is required.
2014-04-03 14:14:28.38 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2014-04-03 14:14:28.39 Server Database Mirroring Transport is disabled in the endpoint configuration.
2014-04-03 14:14:28.39 spid8s Warning ******************
2014-04-03 14:14:28.39 spid8s SQL Server started in single-user mode. This an informational message only. No user action is required.
2014-04-03 14:14:28.40 spid8s Starting up database 'master'.
2014-04-03 14:14:28.42 Server Software Usage Metrics is disabled.
2014-04-03 14:14:28.48 Server CLR version v4.0.30319 loaded.
2014-04-03 14:14:28.56 Server Common language runtime (CLR) functionality initialized using CLR version v4.0.30319 from C:\Windows\Microsoft.NET\Framework64\v4.0.30319\.
2014-04-03 14:14:28.62 spid8s SQL Server Audit is starting the audits. This is an informational message. No user action is required.
2014-04-03 14:14:28.63 spid8s SQL Server Audit has started the audits. This is an informational message. No user action is required.
2014-04-03 14:14:28.64 spid8s SQL Trace ID 1 was started by login "sa".
2014-04-03 14:14:28.64 spid8s Server name is 'ARIELUBA-PC'. This is an informational message only. No user action is required.
2014-04-03 14:14:28.65 spid16s Password policy update was successful.
2014-04-03 14:14:28.66 spid16s Error: 17190, Severity: 16, State: 1.
2014-04-03 14:14:28.66 spid16s Initializing the FallBack certificate failed with error code: 1, state: 20, error number: 0.
2014-04-03 14:14:28.66 spid16s Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2014-04-03 14:14:28.66 spid16s Error: 17182, Severity: 16, State: 1.
2014-04-03 14:14:28.66 spid16s TDSSNIClient initialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
2014-04-03 14:14:28.66 spid16s Error: 17182, Severity: 16, State: 1.
2014-04-03 14:14:28.66 spid16s TDSSNIClient initialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
2014-04-03 14:14:28.66 spid16s Error: 17826, Severity: 18, State: 3.
2014-04-03 14:14:28.66 spid16s Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-04-03 14:14:28.67 spid16s Error: 17120, Severity: 16, State: 1.
2014-04-03 14:14:28.67 spid16s SQL Server could not spawn FRunCommunicationsManager thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
________________________________________________________________________________________________

Is it okay? (see below)
;SQL Server 2014 Configuration File
[OPTIONS]
; Specifies a Setup work flow, like INSTALL, UNINSTALL, or UPGRADE. This is a required parameter.
ACTION="Install"
; Detailed help for command line argument ROLE has not been defined yet.
ROLE="AllFeatures_WithDefaults"
; Use the /ENU parameter to install the English version of SQL Server on your localized Windows operating system.
ENU="True"
; Parameter that controls the user interface behavior. Valid values are Normal for the full UI,AutoAdvance for a simplied UI, and EnableUIOnServerCore for bypassing Server Core setup GUI block.
UIMODE="Normal"
; Setup will not display any user interface.
QUIET="False"
; Setup will display progress only, without any user interaction.
QUIETSIMPLE="False"
; Specify whether SQL Server Setup should discover and include product updates. The valid values are True and False or 1 and 0. By default SQL Server Setup will include updates that are found.
UpdateEnabled="True"
; Specify if errors can be reported to Microsoft to improve future SQL Server releases. Specify 1 or True to enable and 0 or False to disable this feature.
ERRORREPORTING="False"
; If this parameter is provided, then this computer will use Microsoft Update to check for updates.
USEMICROSOFTUPDATE="False"
; Specifies features to install, uninstall, or upgrade. The list of top-level features include SQL, AS, RS, IS, MDS, and Tools. The SQL feature will install the Database Engine, Replication, Full-Text, and Data Quality Services (DQS) server. The Tools feature
will install Management Tools, Books online components, SQL Server Data Tools, and other shared components.
FEATURES=SQLENGINE,REPLICATION,FULLTEXT,DQ,AS,RS,RS_SHP,RS_SHPWFE,DQC,CONN,IS,BC,SDK,BOL,SSMS,ADV_SSMS,DREPLAY_CTLR,DREPLAY_CLT,MDS
; Specify the location where SQL Server Setup will obtain product updates. The valid values are "MU" to search Microsoft Update, a valid folder path, a relative path such as .\MyUpdates or a UNC share. By default SQL Server Setup will search Microsoft Update
or a Windows Update service through the Window Server Update Services.
UpdateSource="MU"
; Displays the command line parameters usage
HELP="False"
; Specifies that the detailed Setup log should be piped to the console.
INDICATEPROGRESS="False"
; Specifies that Setup should install into WOW64. This command line argument is not supported on an IA64 or a 32-bit system.
X86="False"
; Specify the root installation directory for shared components. This directory remains unchanged after shared components are already installed.
INSTALLSHAREDDIR="C:\Program Files\Microsoft SQL Server"
; Specify the root installation directory for the WOW64 shared components. This directory remains unchanged after WOW64 shared components are already installed.
INSTALLSHAREDWOWDIR="C:\Program Files (x86)\Microsoft SQL Server"
; Specify a default or named instance. MSSQLSERVER is the default instance for non-Express editions and SQLExpress for Express editions. This parameter is required when installing the SQL Server Database Engine (SQL), Analysis Services (AS), or Reporting Services
(RS).
INSTANCENAME="MSSQLSERVER"
; Specify that SQL Server feature usage data can be collected and sent to Microsoft. Specify 1 or True to enable and 0 or False to disable this feature.
SQMREPORTING="False"
; Specify the Instance ID for the SQL Server features you have specified. SQL Server directory structure, registry structure, and service names will incorporate the instance ID of the SQL Server instance.
INSTANCEID="MSSQLSERVER"
; The computer name that the client communicates with for the Distributed Replay Controller service.
CLTCTLRNAME="SQLDRC"
; The Windows account(s) used to grant permission to the Distributed Replay Controller service.
CTLRUSERS="ARIELUBA-PC\Arie Luba"
; The account used by the Distributed Replay Controller service.
CTLRSVCACCOUNT="NT Service\SQL Server Distributed Replay Controller"
; The startup type for the Distributed Replay Controller service.
CTLRSTARTUPTYPE="Manual"
; The account used by the Distributed Replay Client service.
CLTSVCACCOUNT="NT Service\SQL Server Distributed Replay Client"
; The startup type for the Distributed Replay Client service.
CLTSTARTUPTYPE="Manual"
; The result directory for the Distributed Replay Client service.
CLTRESULTDIR="C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir"
; The working directory for the Distributed Replay Client service.
CLTWORKINGDIR="C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir"
; RSInputSettings_RSInstallMode_Description
RSINSTALLMODE="DefaultNativeMode"
; RSInputSettings_RSInstallMode_Description
RSSHPINSTALLMODE="SharePointFilesOnlyMode"
; Specify the installation directory.
INSTANCEDIR="C:\Program Files\Microsoft SQL Server"
; Agent account name
AGTSVCACCOUNT="NT Service\SQLSERVERAGENT"
; Auto-start service after installation.
AGTSVCSTARTUPTYPE="Manual"
; Startup type for Integration Services.
ISSVCSTARTUPTYPE="Automatic"
; Account for Integration Services: Domain\User or system account.
ISSVCACCOUNT="NT Service\MsDtsServer120"
; The name of the account that the Analysis Services service runs under.
ASSVCACCOUNT="NT Service\MSSQLServerOLAPService"
; Controls the service startup type setting after the service has been created.
ASSVCSTARTUPTYPE="Automatic"
; The collation to be used by Analysis Services.
ASCOLLATION="Hebrew_CI_AS"
; The location for the Analysis Services data files.
ASDATADIR="C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Data"
; The location for the Analysis Services log files.
ASLOGDIR="C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Log"
; The location for the Analysis Services backup files.
ASBACKUPDIR="C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Backup"
; The location for the Analysis Services temporary files.
ASTEMPDIR="C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Temp"
; The location for the Analysis Services configuration files.
ASCONFIGDIR="C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Config"
; Specifies whether or not the MSOLAP provider is allowed to run in process.
ASPROVIDERMSOLAP="1"
; Specifies the list of administrator accounts that need to be provisioned.
ASSYSADMINACCOUNTS="ARIELUBA-PC\Arie Luba"
; Specifies the server mode of the Analysis Services instance. Valid values are MULTIDIMENSIONAL and TABULAR. The default value is MULTIDIMENSIONAL.
ASSERVERMODE="MULTIDIMENSIONAL"
; CM brick TCP communication port
COMMFABRICPORT="0"
; How matrix will use private networks
COMMFABRICNETWORKLEVEL="0"
; How inter brick communication will be protected
COMMFABRICENCRYPTION="0"
; TCP port used by the CM brick
MATRIXCMBRICKCOMMPORT="0"
; Startup type for the SQL Server service.
SQLSVCSTARTUPTYPE="Automatic"
; Level to enable FILESTREAM feature at (0, 1, 2 or 3).
FILESTREAMLEVEL="0"
; Set to "1" to enable RANU for SQL Server Express.
ENABLERANU="False"
; Specifies a Windows collation or an SQL collation to use for the Database Engine.
SQLCOLLATION="Hebrew_CI_AS"
; Account for SQL Server service: Domain\User or system account.
SQLSVCACCOUNT="NT Service\MSSQLSERVER"
; Windows account(s) to provision as SQL Server system administrators.
SQLSYSADMINACCOUNTS="ARIELUBA-PC\Arie Luba"
; Provision current user as a Database Engine system administrator for %SQL_PRODUCT_SHORT_NAME% Express.
ADDCURRENTUSERASSQLADMIN="True"
; Specify 0 to disable or 1 to enable the TCP/IP protocol.
TCPENABLED="1"
; Specify 0 to disable or 1 to enable the Named Pipes protocol.
NPENABLED="0"
; Startup type for Browser Service.
BROWSERSVCSTARTUPTYPE="Automatic"
; Specifies which account the report server NT service should execute under. When omitted or when the value is empty string, the default built-in account for the current operating system.
; The username part of RSSVCACCOUNT is a maximum of 20 characters long and
; The domain part of RSSVCACCOUNT is a maximum of 254 characters long.
RSSVCACCOUNT="NT Service\ReportServer"
; Specifies how the startup mode of the report server NT service. When
; Manual - Service startup is manual mode (default).
; Automatic - Service startup is automatic mode.
; Disabled - Service is disabled
RSSVCSTARTUPTYPE="Automatic"
; Add description of input argument FTSVCACCOUNT
FTSVCACCOUNT="NT Service\MSSQLFDLauncher"

Executable JAR file: Could not find the main class.

Hello,
I have a problem with making an executable JAR file.
I have written a JAVA program that consists of five different classes of which User.java is the main class and I have saved a text document with Main-Class: User and a blank line after that.
If I try:
jar cmf MainClass.txt User.jar User.class Beheerder.class Operator.class Manager.class MaakVisueelSchema.class
it makes a executable jar file which actually works! :)
But when the Operator class trys to open the MaakVisueelSchema class the screen stays blank.
I can run MaakVisueelSchema with java MaakVisueelSchema.
So I tried to make an executable JAR that consists only of MaakVisueelSchema, the same way as I did for User:
Main-Class: MaakVisueelSchema
jar cmf MainClass.txt MaakVisueelSchema.jar MaakVisueelSchema.class
Then I get the error message:
Could not find the main class. Program will exit.
from the Java Virtual Machine Launcher.
The big difference between MaakVisueelSchema and the other classes is that MaakVisueelSchema contains a PaintComponent method and an ComponentListener. Is it possible that one of those creates the error?
Can anyone help me with this problem?
Thanks in advance!
Bye!

Yes,
I tried:
jar xvf MaakVisueelSchema.jar
and it returns:
META-INF/
META-INF/MANIFEST.MF
MaakVisueelSchema.classN/G. You need to manually create a manifest file in a text editor, have it point to your main class, and enter it in your jar command as an argument.

SQL Server Express 2014 on Win8.1: Could not find the Database Engine startup handle

Hello,
I tried to follow all the similarly titled posts in this forum, yet no solution seems to work, so I hope I can find some up-to-date suggestion here (most of the older posts refer to versions from 2008 to 2012...).
I have installed Visual Studio 2013 (with the latest Update 2 RC) on a freshly installed development workstation with Win 8.1 with all its updates. Now I'd want to install SQL Server 2014 Express, but the setup keeps failing with the dreaded "Could
not find the Database Engine startup handle" error (the log follows below).
What I tried:
1) download again and repair. Same error.
2) completely uninstall by launching setup.exe /Action=uninstall (success), then rebooting the OS, then installing again. Same error. I did this twice, the second time I also manually removed any directory left out in C:\Program Files etc.
When I launch the setup, I select all the components for installation in the package SQLEXPRADV_x64_ENU.exe (1.12 GB, last downloaded today -Apr 3, 2014-), and accept all the defaults including the proposed services accounts. There is no preexisting
SQL Server instance, as expected.
The setup takes its time, and finally fails with the error quoted above. I really do not want to reformat my HD and fully reconfigure my workstation, which took about 3 days... Could anyone suggest a solution to have SQL Server 2014 setup so I can start
developing instead of wasting time in administering the system?
Thanks to all! The log follows.
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893607
Start time: 2014-04-03 18:30:58
End time: 2014-04-03 19:04:41
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: DIOMEDES
Machine processor count: 4
OS version: Windows 8
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered Configured
Package properties:
Description: Microsoft SQL Server 2014
ProductName: SQL Server 2014
Type: RTM
Version: 12
SPLevel: 0
Installation location: C:\Users\Daniele\Downloads\SQLEXPRADV_x64_ENU\x64\setup\
Installation edition: Express
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: true
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, RS, CONN, BC, SDK, BOL, SSMS, ADV_SSMS, LOCALDB
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SQLEXPRESS
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQLEXPRESS
INSTANCENAME: SQLEXPRESS
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer$SQLEXPRESS
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$SQLEXPRESS
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: DIOMEDES\Daniele
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: MU
USEMICROSOFTUPDATE: false
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140403_183057\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: LocalDB
Status: Passed
Feature: Setup Support Files
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140403_183057\SystemConfigurationCheck_Report.htm

Thank you, it worked! I suppose that it was really your nr.3 which made the difference. I changed NT Service\MSSQL$SQLEXPRESS to NT AUTHORITY\System for the Data service. I'll then change it again as suggested (any suggestion about a "standard"
account to be used here?), even if this is a development workstation using SQL Server Express only as a local database for debugging, so security is not really a big concern.
Thanks for the feedback.Ya I know No3 was real step but just added more info so as to rule out any other possibility.
No not as such, you wont believe,quite few pf my clients I have worked for keep it with local system and they have not complained yet ,they are afraid to change account as few of them faced issue SQL Server not coming online due to logon failure( after changing
startup account to some domain a and that was happening due to some AD policy.But if you have nay plans to move Critical database in production which would be act as Database to some Internet facing application please follow my suggestion
of running SQL Server with Least privileged domain account.
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Send spool as PDF, error in opening PDF- Could not find the XObject '00014'

Hi
I am sendind a spool as PDF and when opening the PDF I am getting error saying Could not find the XObject named 00014.
Please let me know how I can see the PDF contents proerly.
Regards
Bala

Hi Bala
Check the sample which can be useful for you.
Pseudo code for sending PDF attachment:
TABLES: tsp01.
TYPES: BEGIN OF t_spool,
                      Rqident TYPE tsp01-rqident,
                END OF t_spool.
DATA: i_spool TYPE STANDARD TABLE OF t_spool,
            Wa_spool TYPE t_spool.
SELECT rqident FROM tsp01
INTO TABLE i_spool
WHERE rqowner = sy-uname.
SORT i_spool DESCENDING BY rqident.
LOOP AT i_spool INTO wa_spool.
ENDLOOP.
YPES: l_ty_tab_pdf TYPE tline OCCURS 0.
DATA: l_pdf TYPE l_ty_tab_pdf,
            l_spool TYPE tsp01-rqident.
Type for binary attachment table.
TYPES: l_ty_tab_objbin TYPE solisti1 OCCURS 0.
DATA: l_objbin TYPE l_ty_tab_objbin.
            l_spool = wa_spool-rqident.
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
      EXPORTING
        src_spoolid                    = l_spool
        no_dialog                      = ' '
      TABLES
        pdf                            = l_pdf
      EXCEPTIONS
        err_no_abap_spooljob           = 1
        err_no_spooljob                = 2
        err_no_permission              = 3
        err_conv_not_possible          = 4
        err_bad_destdevice             = 5
        user_cancelled                 = 6
        err_spoolerror                 = 7
        err_temseerror                 = 8
        err_btcjob_open_failed         = 9
        err_btcjob_submit_failed       = 10
        err_btcjob_close_failed        = 11
        OTHERS                         = 12.
IF sy-subrc <> 0.
    WRITE: / 'error', sy-subrc.
ENDIF.
**/ Convert the PDF format to the table type required for the attachment.
CALL FUNCTION 'QCE1_CONVERT'
    TABLES
      t_source_tab         = l_pdf
      t_target_tab          = l_objbin
    EXCEPTIONS
      convert_not_possible = 1
      OTHERS               = 2.
IF sy-subrc <> 0.
    WRITE: / 'error', sy-subrc.
ENDIF.
TABLES: soli.
DATA: v_email TYPE soli-line. Managers Email
DATA: l_adrnr LIKE kna1-adrnr. Address Number
DATA: l_objky TYPE nast-objky. Object Key
DATA: l_reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE.
DATA: l_objtxt    LIKE solisti1 OCCURS   0 WITH HEADER LINE.
DATA: l_objpack   LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE.
DATA: l_doc_chng LIKE sodocchgi1.
DATA: l_objhead   LIKE solisti1 OCCURS   0 WITH HEADER LINE.
DATA: l_tab_lines LIKE sy-tabix.
CONSTANTS: k_true TYPE boolean_flg VALUE 'X'.
DATA: l_mail TYPE somlreci1-receiver.
l_mail = v_email.
Creation of the document to be sent as File Name
l_doc_chng-obj_name = 'SENDFILE'.
Mail Subject
l_doc_chng-obj_descr =l_text-001.
Here text-001 will contains Compensation Review Statement for Employee Name
Here we can concatenate employee first name and last name to l_text-001.
Completing the recipient list
l_reclist-receiver = l_mail. Manager Email Address
l_reclist-rec_type = 'U'.
APPEND l_reclist.
Mail Contents
l_objtxt = text-002.
APPEND l_objtxt.
Calculate email size in bytes
DESCRIBE TABLE l_objtxt LINES l_tab_lines.
READ TABLE l_objtxt INDEX l_tab_lines.
l_doc_chng-doc_size = (l_tab_lines - 1 ) * 255 + STRLEN( l_objtxt ).
Creation of the entry for the compressed document for the email text
CLEAR l_objpack-transf_bin.
l_objpack-head_start = 1.
l_objpack-head_num = 0.
l_objpack-body_start = 1.
l_objpack-body_num = l_tab_lines.
l_objpack-doc_type = 'RAW'.
APPEND l_objpack.
Creation of the document attachment
(Assume that the data in OBJBIN is in BMP format)
DESCRIBE TABLE l_objbin LINES l_tab_lines.
l_objhead = text-001.
APPEND l_objhead.
CLEAR l_objpack.
Creation of the entry for the compressed/attached document
l_objpack-transf_bin = k_true.
l_objpack-head_start = 1.
l_objpack-head_num = 1.
l_objpack-body_start = 1.
l_objpack-body_num = l_tab_lines.
l_objpack-doc_type = 'PDF'.
l_objpack-obj_name = text-005.
l_objpack-obj_descr = text-001.
l_objpack-doc_size = l_tab_lines * 255.
APPEND l_objpack. "/ .
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
      document_data              = l_doc_chng
      put_in_outbox              = 'X'
    TABLES
      packing_list               = l_objpack
      object_header              = l_objhead
      contents_bin               = l_objbin
      contents_txt               = l_objtxt
      receivers                  = l_reclist
    EXCEPTIONS
      too_many_receivers         = 1
      document_not_sent          = 2
      operation_no_authorization = 4
      OTHERS                     = 99.
IF sy-subrc <> 0.
    WRITE: / 'unsuccessful', sy-subrc.
ELSE.
    WRITE: / 'successful'.
ENDIF.
*Take note it is a requirement to do a commit work for the email to go into transaction
SOST.
COMMIT WORK.
Regards,
Sree

Could not find the main class: SearchExcel. Program will exit. ????

sekic0429{uabudd_milou}[w10/rbssw/2.0] pwd
/tmp/MyJava/jexcelapi
sekic0429{uabudd_milou}[w10/rbssw/2.0] printenv CLASSPATH
/tmp/MyJava/excelapi:/app/jdk/1.6.0_16/jre/lib:/app/jdk/1.6.0_16/lib
sekic0429{uabudd_milou}[w10/rbssw/2.0] ls
build ExcelSearch.java index.html resources SearchExcel.java~ tutorial.html
docs ExelSearch.java~ jxl.jar SearchExcel.class src workbook.dtd
ExcelSearch.class formatworkbook.dtd jxlrwtest.xls SearchExcel.java TestSpecification.xls
sekic0429{uabudd_milou}[w10/rbssw/2.0] javac -extdirs . ExcelSearch.java
sekic0429{uabudd_milou}[w10/rbssw/2.0]
sekic0429{uabudd_milou}[w10/rbssw/2.0] java ExcelSearch
Exception in thread "main" java.lang.NoClassDefFoundError: ExcelSearch
Caused by: java.lang.ClassNotFoundException: ExcelSearch
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
Could not find the main class: ExcelSearch. Program will exit.
sekic0429{uabudd_milou}[w10/rbssw/2.0] cat ExcelSearch.java
import java.io.File;
import java.io.IOException;
import java.util.Date;
import jxl.*;
import jxl.read.biff.BiffException;
public class ExcelSearch
public static void main(String[] args)
try
Workbook workbook = Workbook.getWorkbook(new File("TestSpecification.xls"));
catch (IOException e)
e.printStackTrace();
catch (BiffException e)
e.printStackTrace();
Regards Peter, hope for answer

r035198x wrote:
Where is SearchExcel.class?Excellent question, though I think I spotted a problem with the cp supplied.
Note the documentation for -cp state (in part)
For example, if directory foo contains a.jar and b.JAR, then the class path element foo/* is expanded to a A.jar:b.JAR, except that the order of jar files is unspecified.So instead of this..
java -cp /tmp/MyJava/excelapi:/app/jdk/1.6.0_16/jre/lib:/app/jdk/1.6.0_16/lib SearchExcel..try this..
java -cp /tmp/MyJava/excelapi/*:/app/jdk/1.6.0_16/jre/lib:/app/jdk/1.6.0_16/lib SearchExcelNotes:
1) Adding the JRE classes to the classpath should not be necessary, but I left the rest of the cp unaltered to highlight the one specific difference I am suggesting.
2) When posting code, code snippets, HTML/XML or input/output, please use the code tags. The code tags help retain the indentation and formatting of the sample. To use them, select the sample text and click the CODE button.
If that still fails, tell us more specifically where the SearchExcel class is by copy/pasting the output (within code tags) of the command..
prompt>jar -tvf mysearchexcel.jarWhere, of course, you replace 'mysearchexcel.jar' with the actual Jar name it is supposed to be located in.
Edit 1:
Changed JavaDocs -> documentation.
Edited by: AndrewThompson64 on Jan 11, 2010 7:12 PM

Could not find the main class : HelloWorldApp program will exit

please help me
i downloaded and installed jdk-6u13-windows-i586-p(1) from sun.java.com
in my computer --> Advanced --> environment variables --> i had set
user variable :
variable value
java_home C:\Program Files\Java\jdk1.6.0_13\bin
System variable:
path : C:\Program Files\Java\jdk1.6.0_13\bin
after that i wrote a program
* The HelloWorldApp class implements an application that
* simply prints "Hello World!" to standard output.
class HelloWorldApp {
public static void main(String[] args) {
System.out.println("Hello World!"); // Display the string.
i saved in c:\ mywork
i compiled it with
javac HelloWorldApp.java and then
java HelloWorldApp
output / result also came
but iam unable to create jar file . when it is created it is showing
could not find the main class : HelloWorldApp program will exit
i created jar file by following way
i created
manifest.txt
Min-Class : HelloWorldApp and then
start -->run--> cmd-->
c:\mywork> jar cfm test.jar manifest.txt HelloWorldApp.class
c:\ java -jar test.jar
but it displays a message
" could not find the main class : HelloWorldApp program will exit "
please please please help me please 1000's of please help me

Peter__Lawrey wrote:
You have to specify the manifest with a special option (I think its was -M)
Otherwise the jar will create one (even if you provide it)No, the text file passed as a parameter will be incorporated in the manifest file generated by the JAR tool.
@OP: This will work:
JarTest.java
public class JarTest {
public static void main(String[] args) {
System.out.println("JarTest works!");
}manifest.txt
Main-Class: JarTest+(note there is an extra new line in the manifest.txt!)+
Now execute these commands:
javac JarTest.java
jar cfm MyJar.jar manifest.txt JarTest.class
java -jar MyJar.jar And on my machine, the string "JarTest works!" is displayed on the screen.
And if you look in the MANIFEST.MF file inside your jar file (you can use almost any zip-utility for this), you will see the following:
Manifest-Version: 1.0
Created-By: 1.6.0_0 (Sun Microsystems Inc.)
Main-Class: JarTestOr something similar.

Edge Animate could not find the associated html file

Hey everybody,
I made several projects using Edge Animate 1.0, all of them worked perfectly. But now I need to make some changes, and several of them are displaying an error saying that could not find the html file associated with the project, even though the file is right at the same folder. I opened the .an file in a text editor and checked that the HTMLFileName attribute is pointing to the correct file. I'm attaching a print screen of the error.
If anyone has any idea of what is causing it, and how to solve it, it would be greatly appreciated, as I had no luck in anything I tried to do, and need to edit these files as soon as possible.
Thanks in advance!

Have somebody found a solution for this?
I have the same problem with a little added twist.
The project is located on Creative Cloud.
.an file opens form one computer and gives this error message while being opened from another.
This question is being asked by the community for a while with no solution.
Could somebody from Adobe read this and post the solution?
Thanks

Can't copy text into photoshop: Could not complete the Paste Text command because the clipboard data is empty or invalid.

Getting this error message for 2 weeks: Could not complete the Paste Text command because the clipboard data is empty or invalid.
What's up?

I have the same problem!
Can't find the solution...

Could not find the Database Engine startup handle.

Why can't Microsoft make software that "Just Works" any more.
This is Sooooo frustrating! I'm a developer. I want to write database software and I'd like to use SQL Server. But I can't even get the damn thing to install on a fresh Windows 8.1 installation.
MySQL - installs no problem - it just works.
Oracle - Installs no problem - It just works.
I downloaded SQL Server 2012 Express with SP1, ran the Install, took most of the defaults, and I get:
Install Failed:
The following error has occurred:
Could not find the Database Engine startup handle.
For help, click:
http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%25400x4BDAF9BA%25401306%254025
Of course, clicking on the link takes me to a non existing web page - what else? Just incompetence everywhere. This is Microsoft's own operating system yet they can't even get their own database to install while their competitors can.
How can they let this happen!
Then I googled the above error message. - Hundreds of hits and a lot of them are threads in forums and lots of civilians saying "try this try that" none of which works. Not a single Microsoft Employee to be found in any of the
discussions or answers. And this same problem has been happening since 2008! Yet Microsoft can't be bothered to fix it.
This kind of buggy software shouldn't have made it past Alpha testing.
Come on Microsoft, you just have to try harder. I can understand bugs that happen in unusual circumstances, after all I'm a developer too. But this won't even install on a clean Windows 8. It's tantamount to releasing a "Hello
World" program that crashes on startup!

Hi Bob,
If you make sure all your hardware and software requirements are met for installation of SQL Server 2012 on window 8.1 Its highly unlikely you will face issue.I can understand your situation so let me help you.As Kalman pointed can you paste output
of setup log file which was generated due to failed installation using Kalman's link.
Did you went thorugh below link
How to install SQL server on Win 8.1
Hardware and software requirements for SQL Server 2012
Please first read above links understand how it works and then proceed
Regarding startup handle error .AFAIK its because of Account with which you are trying to install SQL server somehow is not able to start it up after installation.Basically a righst issue.Can be different in some cases.Now whenever you install SQL server
alsway RK on Setup file and select run as administrator.When you reach page window where you need to select startup account for SQL Server please select NT Authority\System( or local system account) .
Details with steps
http://social.technet.microsoft.com/wiki/contents/articles/24364.sql-server-troubleshooting-could-not-find-database-engine-startup-handle-error-during-installation.aspx
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Windows SharePoint Services Error: Exception Details: System.IO.FileNotFoundException: Could not find the application on the Web

I am developing a WSS based WCM site for a customer which has a bilingual interface. Now everything is wokring fine in the development environment. Today I backed-up the Content Database and took the related control file (.ascx & .ascx.cs) to deploy it to the cusomter's test machine. I dint face any problems with the deployment, and after deleted and added the Content DB from Central Administration, I was able to access the English part of the website along with my changes without any problem.
But when I tried accessing the Arbic part of the website, Its giving me the following error,
تعذر العثور على تطبيق ويب الموجود على http://172.20.5.163/ar/. تأكد من كتابتك لمحدد موقع المعلومات (URL) بشكل صحيح. إذا كان URL يؤدي إلى محتوى موجود، يجب على مسؤول النظام إضافة تعيين URL للتطبيق المراد خاص بالطلب الجديد.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.IO.FileNotFoundException: تعذر العثور على تطبيق ويب الموجود على http://172.20.5.163/ar/. تأكد من كتابتك لمحدد موقع المعلومات (URL) بشكل صحيح. إذا كان URL يؤدي إلى محتوى موجود، يجب على مسؤول النظام إضافة تعيين URL للتطبيق المراد خاص بالطلب الجديد.
Roughly translated, it means "Could not find the application on the Web http://172.20.5.163/ar/. Make sure you create your site specific information (URL) correctly. If the URL to the content of lead present, the system administrator to add URL for the application of the appointment of a special request to be new.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.IO.FileNotFoundException: Could not find the application on the Web http://172.20.5.163/ar/. Make sure you create your site specific information (URL) correctly. If the URL to the content of lead present, the system administrator to add URL for the application of the appointment of a special request to be new."
Can you please tell me what is the cause of the problem and how to rectify it? Also do I need to
Regards,
SoniSSP

It is searching for the page, but that page is not available. Did u install the current language pack?

Java.lang.RuntimeException: Could not find the OffLine WLST class

Installation of OIM On weblogic.
oracle/oim/xellerate/setup/setup.xml:443: The following error occurred while executing this line:
/oracle/oim/xellerate/setup/weblogic-setup.xml:196: java.lang.RuntimeException: Could not find the OffLine WLST class
at org.apache.tools.ant.ProjectHelper.addLocationToBuildException(ProjectHelper.java:539)
at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:384)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216)
at org.apache.tools.ant.Project.executeTarget(Project.java:1185)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:40)
at org.apache.tools.ant.Project.executeTargets(Project.java:1068)
at org.apache.tools.ant.Main.runBuild(Main.java:668)
at org.apache.tools.ant.Main.startAnt(Main.java:187)
at org.apache.tools.ant.launch.Launcher.run(Launcher.java:246)
at org.apache.tools.ant.launch.Launcher.main(Launcher.java:67)
Tried to run this command ./wlst.sh
shows
CLASSPATH=/home/oracle/bea/patch_wls1030/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/home/oracle/bea/patch_cie660/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/oracle/jdk/lib/tools.jar:/oracle/weblogic/server/server/lib/weblogic_sp.jar:/oracle/weblogic/server/server/lib/weblogic.jar:/home/oracle/bea/modules/features/weblogic.server.modules_10.3.0.0.jar:/oracle/weblogic/server/server/lib/webservices.jar:/home/oracle/bea/modules/org.apache.ant_1.6.5/lib/ant-all.jar:/home/oracle/bea/modules/net.sf.antcontrib_1.0.0.0_1-0b2/lib/ant-contrib.jar:
PATH=/oracle/weblogic/server/server/bin:/home/oracle/bea/modules/org.apache.ant_1.6.5/bin:/oracle/jdk/jre/bin:/oracle/jdk/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/home/oracle/bin:/home/oracle/bin:/oracle/jdk/bin
Your environment has been set.
CLASSPATH=/home/oracle/bea/patch_wls1030/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/home/oracle/bea/patch_cie660/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/oracle/jdk/lib/tools.jar:/oracle/weblogic/server/server/lib/weblogic_sp.jar:/oracle/weblogic/server/server/lib/weblogic.jar:/home/oracle/bea/modules/features/weblogic.server.modules_10.3.0.0.jar:/oracle/weblogic/server/server/lib/webservices.jar:/home/oracle/bea/modules/org.apache.ant_1.6.5/lib/ant-all.jar:/home/oracle/bea/modules/net.sf.antcontrib_1.0.0.0_1-0b2/lib/ant-contrib.jar::/oracle/weblogic/server/common/eval/pointbase/lib/pbembedded57.jar:/oracle/weblogic/server/common/eval/pointbase/lib/pbtools57.jar:/oracle/weblogic/server/common/eval/pointbase/lib/pbclient57.jar
Initializing WebLogic Scripting Tool (WLST) ...
Problem invoking WLST - java.lang.RuntimeException: Could not find the OffLine WLST class

try Problem invoking WLST - Could not find the OffLine WLST class the last post on this thread, he claims to solve the problem...

'Could not find the requested node error' when guests join the meeting room

I am working on a program where the owner would allow guests after they knock to enter the meeting room. Upon acceptance, they would also be permitted to publish/subscribe audio.
My ' meeting owner' application code is an adaptation of the Knocking Queue example. The 'owner app' code has the following settings in its creation complete.
// Require that guests must knock.Note that this line changes the setting of your room so that in future anyone guest coming in
// has to knock.
cSession.roomManager.guestsHaveToKnock = true;
//Enable autopromote
cSession.roomManager.autoPromote =
true;
I get an error when the owner logins in first and accepts the guest into the meeting room.
   // Event handler function for displaying the selected Alert button.
            private function alertClickHandler(event:CloseEvent):void {
             var queue:Array = pendingArray;
             if ( cSession.userManager.myUserRole == UserRoles.OWNER ) {
      var item:Object = pendingArray.shift();
      trace (item["label"]);
      trace (item["descriptor"].userID);
               if (event.detail==Alert.OK)
                //Admit user for chatting
       cSession.roomManager.knockingQueue.acceptUser(item["descriptor"].userID);
       //Allow user to publish audio - supposed to be promoted through room setting
       //audioPub.setUserRole(item.descriptor.userID, UserRoles.PUBLISHER);
      else //if (event.detail==Alert.CANCEL)
       cSession.roomManager.knockingQueue.denyUser(item["descriptor"].userID);
The 'client' application throws the following error.
SWF] C:\Documents and Settings\a246216\My Documents\Flex Builder 3\Client Chat Tool\bin-debug\ClientChatTool.swf - 1,572,471 bytes after decompression
AFCS Beta Build # : 0.92
requestInfo http://connectnow.acrobat.com/fidelity2/ramr?guk=ZzprOg==&mode=xml&x=0.011843591462820768
Getting FMS at https://na2.connectnow.acrobat.com/fms?ticket=1468amkp7k35g, attempt #1/3
result: <fms>
<origin>fms2.acrobat.com</origin>
<proto_ports>rtmps:443</proto_ports>
<retry_attempts>2</retry_attempts>
</fms>
#FMSConnector# Tue May 12 11:26:50 GMT-0400 2009 protocols: [object ProtocolPortPair]
#FMSConnector# Tue May 12 11:26:50 GMT-0400 2009 [attempt 1 of 2] Connecting to 0/0: rtmps://fms2.acrobat.com/cocomo/na2-sdk-825d634c-46ed-4ed3-aa58-7450f0f7e36a/ramr #startProtosConnect#
#FMSConnector# Tue May 12 11:26:50 GMT-0400 2009 tempNetStatusHandler 0/1,NetConnection.Connect.Success
#FMSConnector# Tue May 12 11:26:50 GMT-0400 2009 isTunneling? false
#FMSConnector# Tue May 12 11:26:50 GMT-0400 2009 is using RTMPS? true
RECEIVED LOGIN AT SESSION
.user descriptor from server [object]
    .displayName [string]= k
    .userID [string]= GUEST-110858C2-4F16-4FE8-BF2C-D572F915FEC5
    .affiliation [number]= 5
    .role [number]= 5
RECEIVENODES UserManager
receiveAllSynchData UserManager
checkManagerSync:[object UserManager]
RECEIVENODES FileManager
receiveAllSynchData FileManager
checkManagerSync:[object FileManager]
RECEIVENODES AVManager
receiveAllSynchData AVManager
checkManagerSync:[object StreamManager]
RECEIVENODES RoomManager
receiveAllSynchData RoomManager
checkManagerSync:[object RoomManager]
RECEIVENODES Chat
receiveAllSynchData Chat
Error: Could not find the requested node.
at com.adobe.rtc.sharedModel::CollectionNode/getNodeConfiguration()[C:\work\main\connect\coc omoPlayer10\src\com\adobe\rtc\sharedModel\CollectionNode.as:394]
at com.adobe.rtc.sharedManagers::StreamManager/getNodeConfiguration()[C:\work\main\connect\c ocomoPlayer10\src\com\adobe\rtc\sharedManagers\StreamManager.as:577]
at com.adobe.rtc.collaboration::AudioPublisher/onUserRoleChange()[C:\work\main\connect\cocom oPlayer10\src\com\adobe\rtc\collaboration\AudioPublisher.as:1009]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at com.adobe.rtc.sharedManagers::StreamManager/onUserRoleChange()[C:\work\main\connect\cocom oPlayer10\src\com\adobe\rtc\sharedManagers\StreamManager.as:1410]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at com.adobe.rtc.sharedModel::CollectionNode/http://www.adobe.com/2006/connect/cocomo/messaging/internal::receiveCascadingUserRole()[C: \work\main\connect\cocomoPlayer10\src\com\adobe\rtc\sharedModel\CollectionNode.as:813]
at com.adobe.rtc.messaging.manager::MessageManager/http://www.adobe.com/2006/connect/cocomo/messaging/internal::receiveUserRole()[C:\work\mai n\connect\cocomoPlayer10\src\com\adobe\rtc\messaging\manager\MessageManager.as:715]
at com.adobe.rtc.session.managers::SessionManagerBase/receiveUserRole()[C:\work\main\connect \cocomoPlayer10\src\com\adobe\rtc\session\managers\SessionManagerBase.as:352]
The above error is thrown just when the 'guest' is accepted into the meeting room. The guest has not published anything at this point.
The chat part is working fine.
I have tried different ways to resolve this issue but I am not getting anywhere. I have tried different things. Your help is appreciated.
Ram

It is win 7 64 bit system and same error on Illustrator x86 and x64.

Could not find the main class: oracle.ide.boot.Launcher. Program will exit

Hi,
I have installed Oracle11g_win64_11gR1, Database and Client.
The issue is unable to invoke "sqldeveloper", getting the following error message. Could you please help ?
FYI. I have already downloaded and installed installed JRE and JDK.
ie. C:\Program Files (x86)\Java\jre6\ and C:\Program Files\Java\jdk1.6.0_24, still did not work.
C:\Users\oracle>java -version
java version "1.6.0_24"
Java(TM) SE Runtime Environment (build 1.6.0_24-b07)
Java HotSpot(TM) 64-Bit Server VM (build 19.1-b02, mixed mode)
Let me know, if you need more information. Here is the error message.
Error Message
=========
(1) if I invoke sqldeveloper, directly from the location " C:\app\oracle\product\11.1.0\db_1\sqldeveloper\sqldeveloper\bin " using explorer, I do get error message
"Unable to find a java Virtual Machine.
To point to a location of java Virtual machine please refer to the Oracle9i JDeveloper Install Guide ( jdev/install.html)"
(2) if I invoke sqldeveloper, directly from the locationC:\app\oracle\product\11.1.0\client_1\sqldeveloper, it prompts me to enter "full path for java.exe".
When I enter full path and continue, still it continue to prompt and ask the same input.
(3) if I invoke sqldeveloper from from command prompt using the batch file "sqldeveloper.bat"
C:\Users\oracle>C:\app\oracle\product\11.1.0\client_1\sqldeveloper\sqldeveloper\
bin\sqldeveloper.bat
C:\Users\oracle>java -Xmx512M -Xverify:none -XX:JavaPriority10_To_OSPriority=10
-XX:JavaPriority9_To_OSPriority=9 -Doracle.ide.util.AddinPolicyUtils.OVERRIDE_F
LAG=true -Dsun.java2d.ddoffscreen=false -Dwindows.shell.font.languages= -Dide.co
nf="sqldeveloper.conf" -Dide.home.dir.name=.sqldeveloper -classpath ..\..\ide\l
ib\ide-boot.jar;..\..\jdev\lib\xmleditor.jar;..\..\ide\lib\oicons.jar;..\..\..\j
dbc\lib\ojdbc5.jar;..\..\jlib\jewt4.jar;..\..\jlib\share.jar;..\..\sqldeveloper\
lib\jle2.jar oracle.ide.boot.Launcher
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/ide/boot/Launc
her
Caused by: java.lang.ClassNotFoundException: oracle.ide.boot.Launcher
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
Could not find the main class: oracle.ide.boot.Launcher. Program will exit.
OS
==============
MS Windows 7 Home Premium
sqldeveloper.conf
===================
SetSkipJ2SDKCheck true
IncludeConfFile ../../jdev/bin/ide.conf
AddVMOption -Dapple.laf.useScreenMenuBar=true
AddVMOption -Dcom.apple.mrj.application.apple.menu.about.name="SQL_Developer"
AddVMOption -Dcom.apple.mrj.application.growbox.intrudes=false
AddVMOption -Dcom.apple.macos.smallTabs=true
AddVMOption -Doracle.ide.util.AddinPolicyUtils.OVERRIDE_FLAG=true
AddJavaLibFile ../../jdev/lib/xmleditor.jar
AddJavaLibFile ../../ide/lib/oicons.jar
AddJavaLibFile ../../jlib/jewt4.jar
AddJavaLibFile ../../jlib/share.jar
AddJavaLibFile ../ide/jlib/xmlef.jar
AddJavaLibFile ../../sqldeveloper/lib/jle2.jar
AddJavaLibFile ../../sqldeveloper/lib/oracle.dbtools.logging.jar
AddVMOption -Dsun.java2d.ddoffscreen=false
AddVMOption -Dwindows.shell.font.languages=
IncludeConfFile sqldeveloper-nondebug.conf
SetJavaHome C:\Program Files\Java\jdk1.6.0_24
Edited by: sivapara on Feb 16, 2011 1:08 PM

I was able to resolve this issue by performing following.
1. Go to the location where sqldeveloperW.exe is being executed from.
2. You will find a file sqldeveloper.conf in that location. Edit this file and change the value of IncludeConfFile to point to actual place. For me following were old and new values.
OLD (Wrong) : IncludeConfFile ../../jdev/bin/ide.conf
NEW (Correct) : IncludeConfFile ../../ide/bin/ide.conf
After making above change in the sqldeveloper.conf file. Save and close it. Restart SQLDeveloper. You will not get the error anymore.
Thanks
Ravi

Could not find the orgunit text in HRP 5125 in Erecrutment

Similar Messages

Maybe you are looking for