'Could not find user' with EAP-TLS in ACS

Hi all,
we are running ACS 4.2(1) Build 15 on a Win2003 member server and use the ACS for EAP-TLS with certificates (Microsoft-PKI) for WLAN authentication (WLC 4402, 6.0 and 4.2). We are using both machine and user authentication.
Sometimes machine authentications fail with following message in AUTH.log:
AUTH 11/01/2010 09:11:28 E 1395 1904 0x31cb External DB [NTAuthenDLL.dll]: Could not find user host/<xxxxxxxx>.com (0x5012)
But some minutes/hours later the same machine can authenticate successful. Other machines never have this problem, no problems at all with user authentications.
Does anyone have an idea where I can proceed with troubleshooting? I haven't found any related messages in server event logs. Are there any other logs where I can find reasons for these problems that are occuring only sometimes?
Thanks
Kai

AUTH.log and RDS.log are two log file you need to look into on ACS side. Make sure the log level is set to "Full"
You might need to check the log on AD side to see why it could not find this host.
Comparing the logs between the working and non-working cases might be helpful.

Similar Messages

  • Keep getting this on certain sites but was ok on older mac. Could not find element with id: "flashcontent"!

    Keep getting the following message on some websites on a new mac, old mac was fine.
    Could not find element with id: "flashcontent"!

    Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Press and hold Shift and left-click the Reload button.
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Cmd + Shift + R" (MAC)
    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox > Preferences > Privacy > Cookies: "Show Cookies"
    Did you copy any files from the old computer to the new computer?
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    You can try to reset Firefox.
    *https://support.mozilla.org/kb/reset-firefox-easily-fix-most-problems
    Reset creates a new profile and tries to import some settings from the old profile leaving the old profile intact.
    *https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile

  • Could not find control with id. 'btnGuardar' trigger for UpdatePanel 'UpdatePanel1'.

    I'm getting this error when I use an update panel, and a trigger AjaxControlToolkit accordion control.
    <%@ Page Language="vb" AutoEventWireup="false" CodeBehind="frmUpload.aspx.vb" Inherits="DemoFileUploadVB.frmUpload"
    MasterPageFile="~/BaseMaster.Master" %>
    <%@ Register Assembly="AjaxControlToolkit" Namespace="AjaxControlToolkit" TagPrefix="asp" %>
    <asp:Content ID="Content1" ContentPlaceHolderID="head" runat="Server">
    </asp:Content>
    <asp:Content ID="Content2" ContentPlaceHolderID="ContentPlaceHolder1" runat="Server">
    <asp:UpdatePanel ID="UpdatePanel1" runat="server">
    <ContentTemplate>
    <asp:Accordion ID="Accordion1" runat="server" FadeTransitions="true" TransitionDuration="250"
    FramesPerSecond="40" RequireOpenedPane="false" SuppressHeaderPostbacks="true">
    <Panes>
    <asp:AccordionPane runat="server">
    <Header>
    <a href="" onclick="return false;" class="Link">Open </a>
    </Header>
    <Content>
    <div>
    <asp:FileUpload ID="fu" runat="server" />
    </div>
    <div>
    <asp:Button ID="btnGuardar" runat="server" Text="Guardar" /></div>
    </Content>
    </asp:AccordionPane>
    </Panes>
    </asp:Accordion>
    </ContentTemplate>
    <Triggers>
    <asp:PostBackTrigger ControlID="btnGuardar" />
    </Triggers>
    </asp:UpdatePanel>
    </asp:Content>
    if it is not the right forum please move the thread to the right one

    Hello,
    The correct forum is ASP.NET forums.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem.
    thanks.
    regards

  • OseException (-12021) Could not find snapshot error during synchronization

    I have successfully deployed mobile adf client to blackberry simulator.
    When I started the application first time, it synchronized the data without any errors.
    But, in subsequent synchronizations, it shows the following error
    oseException (-12021) Could not find snapshot with id 133.
    Any help would be highly appreciated.

    I have successfully deployed mobile adf client to blackberry simulator.
    When I started the application first time, it synchronized the data without any errors.
    But, in subsequent synchronizations, it shows the following error
    oseException (-12021) Could not find snapshot with id 133.
    Any help would be highly appreciated.

  • I bought a mac book pro 15" with retina display and could not find the user's guide/manual anywhere, except for the wuick start manual. I couldn't even find it in apple's web site. Where is it?

    I bought a mac book pro 15" with retina display yesterday and could not find the user's guide/manual anywhere. I couldn't even find it in apple's web site. Where is it?

    here it is :   http://manuals.info.apple.com/en_US/macbook_pro-13-inch-late-2012-quick_start.pd f
    Apples dont come with say, a big manual like old things used to.  Basically its a just a quick reference guide, everything on specifics is online
    Heres a great book everyone raves about, as far as the OSX and being familiar with it> http://www.amazon.com/gp/product/1449330274/ref=s9_psimh_gw_p14_d1_i1?pf_rd_m=AT VPDKIKX0DER&pf_rd_s=center-2&pf_rd_r=0J2E0HXQBHJK423PADBV&pf_rd_t=101&pf_rd_p=13 89517282&pf_rd_i=507846

  • Problem with Cisco Bars after Database Republish ("Could not find Cisco Unified database on this server")

    OS Version: 2000.4.3a
    OS Service Release: 2000.4.5bSR21
    OS Upgrade: 2000.4.5a
    Bars Version: 4.0.15000
    CUCM Version: 4.2(3)sr4b
    During the upgrade process of our CUCM 4.2(3) to version CUCM 4.2(3)sr4b the database replication between our 2 servers (1x pub, 1x sub) failed. After fixing this via dbhelper tool (everthing´s green and smiling again) service seemed to be ok.
    But now Cisco Bars does not work anymore. The backup process of the publisher fails with "Error=[Microsoft][ODBC SQL Server Driver][SQL Server]Login failed for user '(null)'. Reason: Not associated with a trusted SQL-Server connection." So it looks like some kind of database setting for bars  is misconfigured after the republishing process.
    Yesterday I tried to reinstall BARS (now in the newest version 4.0.150000), but the same error message occured. Now I get the message "Could not find Cisco Unified database on this server" when I try to configure the Backup source within BARS.
    Curiously the backup of our second CCM (sub) works as expected (but without CDR and TFTP Data). The "BackAdmin" User exists and is not locked (and wasn´t changed manually at all).
    I am runnig out of ideas... :-(
    Any hint or idea on how to fix this is kindly appreciated
    best regards
    Michael

    Mike,
    I don't have anything definitive here but I am wondering if there is a discrepency between the database names.  In SQL Enterprise Manager, you can go to the Publisher and see what the current database name is.  It will be the one being replicated and will take the form of CCM0300 or CCM0301 or CCM0302.  You should see more than one.  Anyway, take note of the name.
    Then on the Publisher launch regedit and go to HKLM\Software\Cisco Systems, Inc.\DBL\
    Look at the values for DBConnection0 and DBConnection1.
    It will be something like DSN=CiscoCallManager;Server=;DATABASE=;Trusted_Connection=yes
    Does the in the DSN match what you expect?
    Also, going to back to SQL Enterprise Manager, check out the permissions on the database (Right Click->Properties, go to Permissions tab).
    Another thing to check if you think it is permissions related is the AdminUtility.exe (c:\program files\cisco\bin\).  This can be used to resync system account passwords.
    TBH, I am just shooting in the dark here but these are things I would check.
    Regards,
    Bill

  • Could not find the principal resource for user id: paf

    I think I have set up iCal server correctly on a MacOSX 10.5.1 server (upgraded from 10.4.x). But regardless of how many different URLs etc I am trying, I can neither access calendars, nor subscribe to them. I am trying both with Safari and Firefox and iCal client on MacOSX 10.5.1.
    I have iCal service running.
    I have added the user "paf" that have full admin access, and also calendar service is turned on on the server calendar.frobbit.se. Calendar.frobbit.se is one of the hostnames for the server btw.
    I have a group called "canusecalendar" that "paf" is a member of.
    The access for iCal service on the host is for the group canusecalendar and for the user paf, where paf is administrator.
    The closest I have come is when I use a web browser and try to access any URL starting with http://calendar.frobbit.se:8008/. It ask for login, I give the credentials, and in the error log for the iCal service I see the following:
    <pre>2008-02-10 20:46:57+0100 [-] [caldav-8009] [AMP,client] Could not find the principal resource for user id: paf</pre>
    I do see tons of postings by people that more or less guess what URIs to use in browsers, for group calendars, in iCal client when connecting to an account or subscribing. Does anyone on this list know of an authoritative list of URLs that one should use here and there? The closest I have come is the "advanced" section of the iCal Administration document from Apple.

    Yes, I add users using workgroup manager, although the one I now use was added already in version 10.4 of MacOSX Server. I.e. before I upgraded to 10.5.
    Here is error.log (after that access.log):
    <pre>
    2008-02-11 20:32:23+0100 [-] Log opened.
    2008-02-11 20:32:23+0100 [-] twistd 2.5.0 (/System/Library/Frameworks/Python.framework/Versions/2.5/Resources/Python.app/ Contents/MacOS/Python 2.5.1) starting up
    2008-02-11 20:32:23+0100 [-] reactor class: <class 'twisted.internet.selectreactor.SelectReactor'>
    2008-02-11 20:32:23+0100 [-] 4 processors found, configuring 4 processes.
    2008-02-11 20:32:23+0100 [-] Adding pydirector service with configuration: /tmp/pydirtLZ2ZY
    2008-02-11 20:32:23+0100 [-] twistedcaldav.logging.AMPLoggingFactory starting on "'/var/run/caldavd.sock'"
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Log opened.
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] twistd 2.5.0 (/System/Library/Frameworks/Python.framework/Versions/2.5/Resources/Python.app/ Contents/MacOS/Python 2.5.1) starting up
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] reactor class: <class 'twisted.internet.selectreactor.SelectReactor'>
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Configuring directory service of type: twistedcaldav.directory.appleopendirectory.OpenDirectoryService
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Log opened.
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] twistd 2.5.0 (/System/Library/Frameworks/Python.framework/Versions/2.5/Resources/Python.app/ Contents/MacOS/Python 2.5.1) starting up
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] reactor class: <class 'twisted.internet.selectreactor.SelectReactor'>
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Log opened.
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] twistd 2.5.0 (/System/Library/Frameworks/Python.framework/Versions/2.5/Resources/Python.app/ Contents/MacOS/Python 2.5.1) starting up
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] reactor class: <class 'twisted.internet.selectreactor.SelectReactor'>
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Configuring directory service of type: twistedcaldav.directory.appleopendirectory.OpenDirectoryService
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Configuring directory service of type: twistedcaldav.directory.appleopendirectory.OpenDirectoryService
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Log opened.
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] twistd 2.5.0 (/System/Library/Frameworks/Python.framework/Versions/2.5/Resources/Python.app/ Contents/MacOS/Python 2.5.1) starting up
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] reactor class: <class 'twisted.internet.selectreactor.SelectReactor'>
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Configuring directory service of type: twistedcaldav.directory.appleopendirectory.OpenDirectoryService
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] "Directory service <OpenDirectoryService '/Search': '/Search'> has no GUID; generating service GUID from realm name."
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] "Directory service <OpenDirectoryService '/Search': '/Search'> has no GUID; generating service GUID from realm name."
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Configuring SudoDirectoryService with file: /etc/caldavd/sudoers.plist
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Setting up document root at: /Library/CalendarServer/Documents
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Setting up principal collection: <class 'twistedcaldav.directory.principal.DirectoryPrincipalProvisioningResource'>
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Setting up calendar collection: <class 'twistedcaldav.static.CalendarHomeProvisioningFile'>
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Setting up root resource: <class 'twistedcaldav.root.RootResource'>
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] "Directory service <OpenDirectoryService '/Search': '/Search'> has no GUID; generating service GUID from realm name."
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Setting up default ACEs on root resource
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Setting up AdminPrincipals
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Setting root ACL
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Configuring authentication for realm: /Search
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Setting up scheme: kerberos
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Configuring SudoDirectoryService with file: /etc/caldavd/sudoers.plist
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Setting up document root at: /Library/CalendarServer/Documents
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Setting up principal collection: <class 'twistedcaldav.directory.principal.DirectoryPrincipalProvisioningResource'>
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Configuring SudoDirectoryService with file: /etc/caldavd/sudoers.plist
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Setting up calendar collection: <class 'twistedcaldav.static.CalendarHomeProvisioningFile'>
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Setting up document root at: /Library/CalendarServer/Documents
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Setting up principal collection: <class 'twistedcaldav.directory.principal.DirectoryPrincipalProvisioningResource'>
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Setting up root resource: <class 'twistedcaldav.root.RootResource'>
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Setting up calendar collection: <class 'twistedcaldav.static.CalendarHomeProvisioningFile'>
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Setting up root resource: <class 'twistedcaldav.root.RootResource'>
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Setting up default ACEs on root resource
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Setting up AdminPrincipals
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Setting root ACL
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Setting up default ACEs on root resource
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Setting up AdminPrincipals
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Setting root ACL
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] "Directory service <OpenDirectoryService '/Search': '/Search'> has no GUID; generating service GUID from realm name."
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Configuring SudoDirectoryService with file: /etc/caldavd/sudoers.plist
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Setting up document root at: /Library/CalendarServer/Documents
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Setting up principal collection: <class 'twistedcaldav.directory.principal.DirectoryPrincipalProvisioningResource'>
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Setting up calendar collection: <class 'twistedcaldav.static.CalendarHomeProvisioningFile'>
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Setting up root resource: <class 'twistedcaldav.root.RootResource'>
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Setting up default ACEs on root resource
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Setting up AdminPrincipals
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Setting root ACL
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [KerberosCredentialFactoryBase] getServerPrincipalDetails: ('Principal not found in keytab', -1)
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Could not start Kerberos
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Setting up scheme: digest
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Configuring authentication for realm: /Search
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Setting up scheme: kerberos
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Configuring authentication for realm: /Search
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Setting up scheme: kerberos
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Configuring authentication for realm: /Search
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Setting up scheme: kerberos
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [KerberosCredentialFactoryBase] getServerPrincipalDetails: ('Principal not found in keytab', -1)
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [KerberosCredentialFactoryBase] getServerPrincipalDetails: ('Principal not found in keytab', -1)
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Could not start Kerberos
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Setting up scheme: digest
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Could not start Kerberos
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Setting up scheme: digest
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [KerberosCredentialFactoryBase] getServerPrincipalDetails: ('Principal not found in keytab', -1)
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Could not start Kerberos
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Setting up scheme: digest
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Configuring authentication wrapper
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Setting up service
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Configuring log observer: <twistedcaldav.logging.AMPCommonAccessLoggingObserver object at 0x145c930>
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Adding server at 127.0.0.1:8009
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Adding SSL server at 127.0.0.1:8444
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] twisted.web2.channel.http.HTTPFactory starting on 8009
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Starting factory <twisted.web2.channel.http.HTTPFactory instance at 0x14595a8>
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] twisted.web2.channel.http.HTTPFactory starting on 8444
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] set uid/gid 93/93
    2008-02-11 20:32:23+0100 [twistedcaldav.logging.AMPLoggingFactory] AMPLoggingProtocol connection established (HOST:UNIXSocket('/var/run/caldavd.sock') PEER:UNIXSocket(''))
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] AMP connection established (HOST:UNIXSocket(None) PEER:UNIXSocket('/var/run/caldavd.sock'))
    2008-02-11 20:32:24+0100 [-] [caldav-8012] [-] Configuring authentication wrapper
    2008-02-11 20:32:24+0100 [-] [caldav-8012] [-] Setting up service
    2008-02-11 20:32:24+0100 [-] [caldav-8010] [-] Configuring authentication wrapper
    2008-02-11 20:32:24+0100 [-] [caldav-8010] [-] Setting up service
    2008-02-11 20:32:24+0100 [-] [caldav-8010] [-] Configuring log observer: <twistedcaldav.logging.AMPCommonAccessLoggingObserver object at 0x145c7b0>
    2008-02-11 20:32:24+0100 [-] [caldav-8011] [-] Configuring authentication wrapper
    2008-02-11 20:32:24+0100 [-] [caldav-8011] [-] Setting up service
    2008-02-11 20:32:24+0100 [-] [caldav-8011] [-] Configuring log observer: <twistedcaldav.logging.AMPCommonAccessLoggingObserver object at 0x145c7b0>
    2008-02-11 20:32:24+0100 [-] [caldav-8011] [-] Adding server at 127.0.0.1:8011
    2008-02-11 20:32:24+0100 [-] [caldav-8012] [-] Configuring log observer: <twistedcaldav.logging.AMPCommonAccessLoggingObserver object at 0x145c7b0>
    2008-02-11 20:32:24+0100 [-] [caldav-8012] [-] Adding server at 127.0.0.1:8012
    2008-02-11 20:32:24+0100 [-] [caldav-8012] [-] Adding SSL server at 127.0.0.1:8447
    2008-02-11 20:32:24+0100 [-] [caldav-8010] [-] Adding server at 127.0.0.1:8010
    2008-02-11 20:32:24+0100 [-] [caldav-8010] [-] Adding SSL server at 127.0.0.1:8445
    2008-02-11 20:32:24+0100 [-] [caldav-8011] [-] Adding SSL server at 127.0.0.1:8446
    2008-02-11 20:32:24+0100 [-] [caldav-8012] [-] twisted.web2.channel.http.HTTPFactory starting on 8012
    2008-02-11 20:32:24+0100 [-] [caldav-8012] [-] Starting factory <twisted.web2.channel.http.HTTPFactory instance at 0x14595a8>
    2008-02-11 20:32:24+0100 [-] [caldav-8010] [-] twisted.web2.channel.http.HTTPFactory starting on 8010
    2008-02-11 20:32:24+0100 [-] [caldav-8010] [-] Starting factory <twisted.web2.channel.http.HTTPFactory instance at 0x14595a8>
    2008-02-11 20:32:24+0100 [-] [caldav-8010] [-] twisted.web2.channel.http.HTTPFactory starting on 8445
    2008-02-11 20:32:24+0100 [-] [caldav-8011] [-] twisted.web2.channel.http.HTTPFactory starting on 8011
    2008-02-11 20:32:24+0100 [-] [caldav-8011] [-] Starting factory <twisted.web2.channel.http.HTTPFactory instance at 0x14595a8>
    2008-02-11 20:32:24+0100 [-] [caldav-8011] [-] twisted.web2.channel.http.HTTPFactory starting on 8446
    2008-02-11 20:32:24+0100 [-] [caldav-8012] [-] twisted.web2.channel.http.HTTPFactory starting on 8447
    2008-02-11 20:32:25+0100 [-] [caldav-8012] [-] set uid/gid 93/93
    2008-02-11 20:32:25+0100 [twistedcaldav.logging.AMPLoggingFactory] AMPLoggingProtocol connection established (HOST:UNIXSocket('/var/run/caldavd.sock') PEER:UNIXSocket(''))
    2008-02-11 20:32:25+0100 [-] [caldav-8012] [-] AMP connection established (HOST:UNIXSocket(None) PEER:UNIXSocket('/var/run/caldavd.sock'))
    2008-02-11 20:32:25+0100 [twistedcaldav.logging.AMPLoggingFactory] AMPLoggingProtocol connection established (HOST:UNIXSocket('/var/run/caldavd.sock') PEER:UNIXSocket(''))
    2008-02-11 20:32:25+0100 [-] [caldav-8010] [-] set uid/gid 93/93
    2008-02-11 20:32:25+0100 [-] [caldav-8010] [-] AMP connection established (HOST:UNIXSocket(None) PEER:UNIXSocket('/var/run/caldavd.sock'))
    2008-02-11 20:32:25+0100 [-] [caldav-8011] [-] set uid/gid 93/93
    2008-02-11 20:32:25+0100 [twistedcaldav.logging.AMPLoggingFactory] AMPLoggingProtocol connection established (HOST:UNIXSocket('/var/run/caldavd.sock') PEER:UNIXSocket(''))
    2008-02-11 20:32:25+0100 [-] [caldav-8011] [-] AMP connection established (HOST:UNIXSocket(None) PEER:UNIXSocket('/var/run/caldavd.sock'))
    2008-02-11 20:32:57+0100 [-] [caldav-8009] [-] AMP connection established (HOST:UNIXSocket(None) PEER:UNIXSocket('/var/run/caldavd-pydir.sock'))
    2008-02-11 20:32:57+0100 [-] [caldav-8009] [AMP,client] Unauthenticated users not enabled with the 'calendar' SACL
    2008-02-11 20:33:04+0100 [-] [caldav-8010] [-] AMP connection established (HOST:UNIXSocket(None) PEER:UNIXSocket('/var/run/caldavd-pydir.sock'))
    2008-02-11 20:33:04+0100 [-] [caldav-8010] [AMP,client] Could not find the principal resource for user id: paf
    2008-02-11 20:33:35+0100 [-] Received SIGTERM, shutting down.
    2008-02-11 20:33:35+0100 [-] (Port None Closed)
    2008-02-11 20:33:35+0100 [AMPLoggingProtocol,0,] AMPLoggingProtocol connection lost (HOST:UNIXSocket('/var/run/caldavd.sock') PEER:UNIXSocket(''))
    2008-02-11 20:33:35+0100 [AMPLoggingProtocol,1,] AMPLoggingProtocol connection lost (HOST:UNIXSocket('/var/run/caldavd.sock') PEER:UNIXSocket(''))
    2008-02-11 20:33:35+0100 [AMPLoggingProtocol,2,] AMPLoggingProtocol connection lost (HOST:UNIXSocket('/var/run/caldavd.sock') PEER:UNIXSocket(''))
    2008-02-11 20:33:35+0100 [AMPLoggingProtocol,3,] AMPLoggingProtocol connection lost (HOST:UNIXSocket('/var/run/caldavd.sock') PEER:UNIXSocket(''))
    2008-02-11 20:33:35+0100 [-] Main loop terminated.
    2008-02-11 20:33:35+0100 [-] Server Shut Down.
    </pre>
    And here is access.log:
    <pre>
    Log opened - server start: [Mon Feb 11 20:32:23 2008].
    192.165.72.12 - - [11/Feb/2008:20:32:57 +0200] "GET / HTTP/1.1" 401 141 "-" "Mozilla/5.0 (Macintosh; U; Intel Mac OS X; en-us) AppleWebKit/523.10.6 (KHTML, like Gecko) Version/3.0.4 Safari/523.10.6" [6.4 ms]
    192.165.72.12 - - [11/Feb/2008:20:33:04 +0200] "GET / HTTP/1.1" 403 123 "-" "Mozilla/5.0 (Macintosh; U; Intel Mac OS X; en-us) AppleWebKit/523.10.6 (KHTML, like Gecko) Version/3.0.4 Safari/523.10.6" [60.7 ms]
    Log closed - server stop: [Mon Feb 11 20:33:35 2008].
    </pre>

  • Could not find prepared statement with handle %.

    Greetings. I've seen several posts for this error on the web, but no clear cut answers. I captured the code below in profiler, with the intention of replaying in mgmt studio.
    However, the attempt end in the following error: "Could not find prepared statement with handle 612."
    declare @p1 int
    set @p1=612
    declare @p2 int
    set @p2=0
    declare @p7 int
    set @p7=0
    exec sp_cursorprepexec @p1 output,@p2 output,N'@P0 int,@P1 int,@P2 int,@P3 int,@P4 bit',N'EXEC dbo.mySproc @P0,@P1,@P2,@P3,@P4 ',4112,8193,@p7 output,219717,95,NULL,1,0
    select @p1, @p2, @p7
    Something noteworthy is that my sproc only has 5 input parameters, but this makes it look like it has many more.
    How do I manipulate the code enough to make it work in mgmt studio? Thanks!
    TIA, ChrisRDBA

    In profiler you would normally see RPC:Starting and RPC:Completed. The statement shown in RPC staring is what you need to pick because as Erland explained, completed would show "funky" behavior.
    Balmukund Lakhani | Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
    This posting is provided "AS IS" with no warranties, and confers no rights.
    My Blog |
    Team Blog | @Twitter
    Author: SQL Server 2012 AlwaysOn -
    Paperback, Kindle

  • WCF Published Orch - Could not find a base address that matches scheme http for the endpoint with binding MetadataExchangeHttpBinding

    I have an orchestration published as a web service.  It was working fine on our test environment, we deployed to production, and now getting this error.  The website wouldn't go in the BizTalk MSI, so we copied the files.  We reset the Authentication
    to match the test system (we are using Basic Auth).
    When we try to browse the webservice in the browser, it prompt for userid/password, we enter it, then it gives the following error. 
    I'm not even sure what it means by "base address", if URL was https://prod.mydomain.com/myapp/myservice.svc, would https://prod.mydomain.com be the based address? In the test environment, the URL is https://test.mydomain.com/myapp/myservice.svc. 
    In both environments, we have a customer calling this webservice.
    Also, I don't know what it means "scheme http".  We are using https:... on the URL.
    I'm thinking this is either security related, something to do with the app pool being different, or maybe something to do with bindings. 
    Thanks,
    Neal Walter
    http://MyLifeIsMyMessage.net
    Web.config:
        <services>
          <!-- Note: the service name must match the configuration name for the service implementation. -->
          <service name="Microsoft.BizTalk.Adapter.Wcf.Runtime.BizTalkServiceInstance" behaviorConfiguration="ServiceBehaviorConfiguration">
            <endpoint name="HttpMexEndpoint" address="mex" binding="mexHttpBinding" bindingConfiguration="" contract="IMetadataExchange" />
            <!--<endpoint name="HttpsMexEndpoint" address="mex" binding="mexHttpsBinding" bindingConfiguration="" contract="IMetadataExchange" />-->
          </service>
        </services>
      </system.serviceModel>
        <system.webServer>
            <security>
                <authorization>
                    <remove users="*" roles="" verbs="" />
                    <add accessType="Allow" users="myCustomer" />
                </authorization>
            </security>
        </system.webServer>
    Server Error in '/eSecuritelIn' Application.
    Could not find a base address that matches scheme http for the endpoint with binding MetadataExchangeHttpBinding. Registered
    base address schemes are [https].
    Description:
    An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the
    code. Exception Details: System.InvalidOperationException: Could not find a base address that matches scheme http for the endpoint with binding MetadataExchangeHttpBinding. Registered base address schemes are [https].
    Source Error:
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using
    the exception stack trace below.
    Stack Trace:
    [InvalidOperationException: Could not find a base address that matches scheme http for the endpoint with binding MetadataExchangeHttpBinding. Registered base address schemes
    are [https].]
       System.ServiceModel.ServiceHostBase.MakeAbsoluteUri(Uri relativeOrAbsoluteUri, Binding binding, UriSchemeKeyedCollection baseAddresses) +16582113
       System.ServiceModel.Description.ConfigLoader.LoadServiceDescription(ServiceHostBase host, ServiceDescription description, ServiceElement serviceElement, Action`1
    addBaseAddress) +1082
       System.ServiceModel.ServiceHostBase.ApplyConfiguration() +156
       System.ServiceModel.ServiceHostBase.InitializeDescription(UriSchemeKeyedCollection baseAddresses) +215
       System.ServiceModel.ServiceHost..ctor(Object singletonInstance, Uri[] baseAddresses) +400
       Microsoft.BizTalk.Adapter.Wcf.Runtime.WebServiceHost`3..ctor(IsolatedReceiverType isolatedReceiver, BizTalkServiceInstance serviceInstance, Uri[] baseAddresses)
    +36
       Microsoft.BizTalk.Adapter.Wcf.Runtime.WebServiceHostFactory`3.CreateServiceHost(String constructorString, Uri[] baseAddresses) +533
       System.ServiceModel.HostingManager.CreateService(String normalizedVirtualPath) +1413
       System.ServiceModel.HostingManager.ActivateService(String normalizedVirtualPath) +50
       System.ServiceModel.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath) +1172
    [ServiceActivationException: The service '/eSecuritelIn/eSecuritelIn_OrchPublished_RepairEquipmentService.svc' cannot be activated due to an exception during compilation. 
    The exception message is: Could not find a base address that matches scheme http for the endpoint with binding MetadataExchangeHttpBinding. Registered base address schemes are [https]..]
       System.Runtime.AsyncResult.End(IAsyncResult result) +901424
       System.ServiceModel.Activation.HostedHttpRequestAsyncResult.End(IAsyncResult result) +178702
       System.Web.AsyncEventExecutionStep.OnAsyncEventCompletion(IAsyncResult ar) +107
    Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET
    Version:4.0.30319.272

    When you want to migrate Web Applications from one environment to other there are multiple ways to achieve it.
    1) Migrate in MSI- Export MSI and select the option for your Web Application, however I don't recommend this option
    2) Is to browse the folder for Web Application(Right click on web app and browse). Copy this folder(normally within inetpub folder) and take it to the inetpub folder of other environment. Later from the IISManager create application.
    Are you not using the same Binding file?
    Check you web.config file and see if the endpoint is configured for mexHTTpBinding.
    Old: binding="mexHttpBinding"
    New: binding="mexHttpsBinding"
    web.config snippet:
    <services>
    <service behaviorConfiguration="ServiceBehavior" name="LIMS.UI.Web.WCFServices.Accessioning.QuickDataEntryService">
    <endpoint behaviorConfiguration="AspNetAjaxBehavior" binding="webHttpBinding" bindingConfiguration="webBinding"
    contract="LIMS.UI.Web.WCFServices.Accessioning.QuickDataEntryService" />
    <endpoint address="mex" binding="mexHttpsBinding" contract="IMetadataExchange" />
    </service>
    Also look into the below article- How to fix: "Could not find a base
    address that matches scheme http for the endpoint with binding WebHttpBinding" Errors
    Moving to https = Could not find a base address that matches scheme
    Thanks,
    Prashant
    Please mark this post accordingly if it answers your query or is helpful.

  • Moving files to another directory got an error message [File System Task] Error: An error occurred with the following error message: "Could not find a part of the path.".

    Hi all,
    I am having a list of files in a folder named datafiles and I am processing them one by one when I finish each one I want to move the file into a folder archive.
    I am having a variable named filename and archivefilename and two fileconnections  one is originalfiles and archivefiles
    archivefilename=replace( @[User::filename],"datafiles","archive")
    orginalfiles connection is an expression =@user:filename
    archivefies connection is an expression=@user:archivefilename
    the filename comes from reading the folder that contains those files
    public void Main()
                string[] filenames;
                filenames = Directory.GetFiles(@"C:\luminis\datafiles\");
                Array.Sort(filenames);
                Dts.Variables["filelist"].Value = filenames;
                Dts.TaskResult = (int)ScriptResults.Success;
    The folder c:\luminis\archive\ exists
    why I am getting this error
    My filesystem task : destinationpathvariable =false
    destinationconnection:archivefile
    overwrite=true
    operation=movefile
    issourcepathvariable=false
    sourceconnection=original file
    why am i getting this error[File System Task] Error: An error occurred with the following error message: "Could not find a part of the path.".
    sohairzaki

    there may be 2 problem...
    1> specify a target directory only, not with the file name. 
    OR
    2> Try using the unc,path format \\computername\sharename\
    let us know your observation...
    Let us TRY this | Mail me
    My Blog :: http://quest4gen.blogspot.com/

  • Premiere cc 2014 crash with message "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again."

    I updated to Premiere Pro CC 2014, all the other Adobe CC 2014 software works great, but Premiere doesnt even load. The starting page (frame) comes up - my whole computer slows down and after a minute or two it crashes completely and comes up with the message :  "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again."
    I'm running a macbook Pro 15" (2014) with 16GB RAM and 760GB SSD.
    PLEASE HELP!

    Hi Delarey,
    Please go to the following location and rename the folder to old_folder name
    User/user  library/Application Support and rename Adobe folder
    User/user library/Preferences and rename the Adobe folder
    Then go to Documents folder and Go to Adobe/Premiere pro/8.0 and rename 8.0 folder
    Make sure that you are in user library if you are not sure check the link below.
    Access hidden user library files | Mac OS 10.7 and later
    Regards,
    Vinay

  • When I click on an Icon on my desktop to take me to a site (such as google) I get a message that it could not find the loaction. Then it goes ahead and opens a Firefox window with the site anyway as if the message never happened.

    When I click on an Icon on my desktop to take me to a site (such as Google) I get a message that it could not find the location. Then it goes ahead and opens a Firefox window with the site anyway as if the message never happened. Then when I close the window I see that the message is still there. I have to close it separately. Any suggestions? Oh, and this only happens if Firefox is NOT already active. If I have another Firefox window open when I click on the Icon, it just opens as expected. This message appears no matter which site Icon I select. It did not happen before I upgraded to ver 9.0.

    Hello BassoonPlayer,
    Since you are using one of the the school's Macbooks, it is quite possible that the time and date are not properly set on the computer that you are using.  FaceTime will not work if you do not have the proper time zone set up for the location that you are in.  This past week, there were a two other Macbook users I've helped by simply telling them to set the Date/Time properly.  By the way, you described your problem very well, which makes it easier for us to help you.  Hope this solves your problem -- if not, post back and I can suggest other remedies.
    Wuz

  • Error when opening a new file: "Could not find the user documents directory"

    Why can't I create a new file and I get this error everytime: "Could not find the user documents directory"?

    Hi Team,
    Please check this forum thread with similar issue.
    Create New gives an error "Could not find the user document directory"
    Regards,
    Devendra

  • Help needed with application: "could not find the main class"

    I am pretty new to java and am trying to figure out applications a bit now. The one im working on does run within my editor, but when i "test" it or try to run it from within a .jar file it returns a "could not find the main class" error.
    I have a code similar to this:
    public class user{
    public static void main(String[] args){
    new user();
    public user{
    Does this have to do with it? I've been trying to get this right for a couple of days now, I just wanna be able to run it (on either my pc or another) without starting the Editor.
    Looking forward to receiving an answer..

    It sounds like you are missing the Main-Class attribute in your manifest file. Create a file 'manifest.mf' with the following line 'Main-Class: user'
    Then include that manifest in your jar:
    'jar -cfm user.jar manifest.mf user.class'
    Then run the jar: 'java -jar user.jar'
    http://java.sun.com/docs/books/tutorial/jar/basics/mod.html

  • Could not find the log in SCUL for changes made into user.

    Hi,
    We assigned role to user in prob system in CUA .
    I cannot find who has made those changes into that user.
    I have looked in SCUL but could not find it. I did not find any changes in SUIM.
    Can anybody help me hjow can i find who has added that role.
    Thanks Rajesh
    Edited by: Rajesh Nanda on Apr 1, 2009 12:10 AM

    Hi Rajesh,
    this is the normal behaviour. The user gets changed in the CUA-child system by the user who is used in the RFC-connection form CUA master to cua child. Only in the case you use a trusted/trusting RFC connection, the user who performs the changes in the central system connects also to the child systems. Only in that case you will find the 'real' user as changer in the child system change docs.
    With SAP note # 1079207 new change documents are delivered for the CUA-case. To evaluate that changedocs you can use the new report rsusr100n (Ithink ,that it is still not integrated in SUIM until now, so you have to start it in se38,...)
    b.rgds,
    Bernhard

Maybe you are looking for

  • My iPod can't be read from or written to

    Having finally got through the rigmaroles of set up and iTunes, I have tried on a number of occasions to synchronise my new ipod nano 4gb. It manages to download/sync about 26 tracks then comes up with an error message "Attempting to copy to the disk

  • Emailed EPS files not visible

    A friend of mine has been emailing me eps files from the Mail program on the MAC but I cannot see them as attachments in the email in Outlook or in my webmail. They seem to be coming across as images in line with the text rather than as attachments.

  • DI: Problem with Serials on (AR) Return

    Hi, I've got a really simple piece of code, which is working fine for Goods Receipts (AP) but not for Returns (AR). I'm able to create a Return manually without problems, but the code doesn't seem to work: I get Return created, but then when I try to

  • I've hit a very complicated brick wall

    I'm sorry that I can't be more descriptive in my title, but I think I stuck my neck too deep and now I can't tell what is not working. I'm going to atempt to be as clear and concise as possible in my explanation, but sorry if I do something completel

  • Monitoring customer's systems in Solution Manager 7.1

    Hello gurus. I have successfully added our internal system to our Solution Manager 7.1 SP4 running on Oracle 11.2.0.2. And now I'm wondering is it possible to add customer's systems to our Solution manager? There are some unclear moments one of which