Could not get remote version of file.name to compare
Hi All,
Running CS5.5 installed on my new MacPro running 10.6.8.
I have to sites installed. The first one works great including file compare and sync.
On the 2nd site, when I try to do a file compare, I get "Could not get remote version of xxx to compare, where xxx is my selected filename.
As I said, the on the first site, this works perfectly.
I can get files, I can put files, but I cannot compare a file.
I checked the file permissions. They are 755 and the owner is set the similarly to the first site that works.
Another hint is that when I try to sync the site, it tells me that syncronization is not necessary. When I view the files anyway, it shows zero files, even though the show all files checkbox is checked.
Any suggestions would be appreciated.
best regards,
Bill
OK, I fixed this, but not sure how.
I think the cache was corrupt.
Similar Messages
-
The itunes application could not be opened. The file name was invalid or..
...too long.
No idea when this started but cannot launch iTunes at all. To reiterate, when I try to launch iTunes I get the following error message: The itunes application could not be opened. The file name was invalid or too long.
I actually uninstalled it and reinstalled on my external drive and it came back with the same error. Any ideas on how to troubleshoot what caused this? I am at my wits ends with this!I can't get mine to open at all. I even try clicking on a song to see if that will open it, nope. I have hooked up my iphone and ipods, nope. Click the icon, nope still nothing. It keeps erroring, but won't let me copy the error to put in here. I looked at the report it wants to send out, but there is nothing that says why it is erroring. Anyone else having this problem. Please email me at [email protected] to let me know what you did to solve it, or who I have to talk to to get it fixed... Thank you
-
Hi could anyone help me out? my iphone 3gs keeps restarting itself every two minutes which i think is some kind of software issue,now there are a number of things i have done starting with putting in a new battery.when i charge the phone it resets itself every two minutes or so and the battery indicator stays at 4% so i decided to restore the phone on itunes (which is the latest edition) and when i connect my phone which i have put into recovery mode using the buttons, i get an error message saying :- the iphone software update server could not be contacted.a duplicate file name was specified. i have tried re-installing i tunes and that doesn't solve the issue and i have trawled through the program files to see if i could spot the duplicate but without success ,has anyone had the same issue and resolved it?
An iPhone 3G cannot be updated beyond iOS 4.2.1...that's the end of the line for your phone.
-
Could not initialize photoshop, because the file name was not valid
Hello,
my friend (not very good with computers) asked me to fix his Photoshop 8, because "it just stopped working one day". When I try to run it, I see splash screen, initializing photoshop, something about TWAIN, and then:
Could not initialize Photoshop, because the file name was not valid
followed by crashing the Photoshop. I tried reinstalling Photoshop, resetting user preferences, even deleting all user settings from Documents and Settings folder, but nothing - I keep getting this error. I tried plugging in his camera, usb flash disks, because I thought Photoshop may created scratch file or something in there - but it didnt work.
So I decided to install him my copy of Photoshop CS3, just to make sure its some bug in Photoshop 8, but I didnt believe my eyes - after installing, im getting the exact error again.
And now Im completely lost - I was unable to google the error message, looks like Im the first person ever who happened to see it.
His computer is about two years old, 2 GHz cpu, 512 MB RAM, some decent video card, 100 GB space left on disks, operating system is Win XP SP2.
I would really appreciate any help, thank you in advance
Peter>Yes, many times.
:) never hurts to ask!
also have you tried creating a new user with admin rights to see if it's an id issue? (sorry, there's several similar theads going on and i sometimes forget what i've read where.) there was just a guy yesterday that solved a similar problem by creating a new id. we could never tell what the problem was with the old one... -
GetCoreResourceModificationDate could not get path to timestamp file
Porting my InDesign CS5.5 Plugin to InDesign CS6, when I build a debug version of the plugin and deploy it to the InDesign CS6 Debug version and launch InDesign I get "PlugInData::GetCoreResourceModificationDate could not get path to timestamp file: C:\Program Files (x86)\Adobe\Adobe InDesign CS6 Debug\Plug-ins\SCC\(SCCINDDEXTRACTION V7.1.0.17 FOR CS6 Resources)\timestamp.idrc" which suggests that InDesign is expecting to find a "timestamp.idrc" file in the root of my plugin's resources subfolder. I have searched the sdk and google and have found nothing about a timestamp resource for InDesign plugins. Is my plugin resource (.rc or .fr file) supposed to include some kind of timestamp that would cause the resource compiler to generate a timestamp.idrc file?
OK, I fixed this, but not sure how.
I think the cache was corrupt. -
Could not purchase. A duplicate file name was sepcified.
I keep getting an error whenever I try to buy anything through the iTunes store. This has been happening ever since I had my optical drive replaced, on top of some other problems with burning as well. Any idea how to fix this?
I've been getting the same error message when trying to download/update apps ever since I updated iTunes to 9.2.1.5. Also says "there is an error in the iTunes Store, Please try again".
-
I cannot open Pages documents that I have worked on and saved. When I try to reopen Pages documents that I've saved, I get the following
message:
"The document “[name of document]” could not be opened. The file isn’t in the correct format.
The file might be corrupted, truncated, or in an unexpected format."
I have downloaded the latest update to iWork, but that doesn't help.
I use Mac OSX 10.6.7
I am using Pages '09 version 4.0.5 (852)
If anyone can help, I would greatly appreciate it.
Best regards,
New York Mac UserA few general trouble shooting tips that may apply here:
1. If you used Software Update to do the OS update(s) to reach 10.6.7, go to http://support.apple.com/downloads/ and download and apply the Mac OS v10.6.7 Combo Updater. The Combo Updater contains some fixes that were not included in the incremental updaters used by Software Update.
1a. Check that you have the current version of Pages (and of the other iWork applications) installed. All three applications' current version numbers end in .0.5
2. A common cause of malfunctioning applications is a corrupted preferences file (.plist file). Your Pages '09's plist is at yourname > Library > Preferences > com.apple.iWork.pages.plist
Quit Pages, locate the file and Drag it to the Desktop (or to the Trash).
Restart Pages and attempt to open one of the files.
If all is well, Trash the plist file and empty the Trash.
If there's no change, AND you've made changes to the Preferences that you wish to keep, drag the file back to its previous location, replacing any new one that has been created.
Regards,
Barry -
How do I get my videos to upload from my sony handy cam when I get the message The following file could not be imported. The file is in an unrecognized format. I am using a macbook pro version 10.9.3, I have 411 gb free space, it worked before I downloaded the latest update for iphoto.
You may be able to download and install the update from here: Digital Camera RAW Compatibility 6.01
If I upgrade to Yosemite will I be forced to go to the new Photos program
No. After upgrading (and of course make a back up first) you will need to update iPhoto to v9.6.1 (you won't be able to do this prior to upgrading). Here's how:
Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
Install the App from the App Store.
Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.
Photos is v1 of a new app, as yes it's not as mature as iPhoto. It uses a different technology for working with external editors. That requires Adobe to write an extension to let it hook into the new app. Not done yet, neither has anyone else.
Going forward: iPhoto will run on OS 10.10., but there is no guarantee for subsequent versions of the OS. You might want to factor that into your anger term thinking. -
When I try to import pictures from media card to iPhoto, I'm getting the error 'The following file could not be imported. The file is in an unrecognized format.' The file is a jpeg and I've never had this problem before.
What version of iPhoto?
What colour profile is the shot?
As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there? -
Dispatcher yellow,J2EE status info unavailable,Could not get file from DB
Hello Experts,
I have successfully installed a ECC 6.0 server-ABAP +JAVA system (DB2 v9.5 FP4 windows server 2008-x64 bit).
Kernel: 700 , Patch: 185 ; SP level : rel 700 , level 17
I upgraded JSPM sucessfully from 14 to 17.Then i was trying to apply JAVA sp's one by one using single sp option JSPM tool.
I DEPLOYED the first sp component sucesfully but after that the next component gave warning in JSPM check that SDM is not started.
I checked MMC.Dispatcher was YELLOW and J2EE status info unavailable. Cannot use JCMON to start SDM..option 20 gives error--cannot access shared memory
I already tried Notes 784568 and 997510
Relevant logs:-
jvm_bootstrap.out
=================================================================================================
Error synchronizing file [.\..\os_libs\FontManagerService_native.zip].
com.sap.engine.frame.core.configuration.InvalidPersistentDataStreamException: Could not get file from DB.
Attempt to fully materialize lob data that is too large for the JVM.
Disable data source property "fullyMaterializeLobData" for locator-based lob implementation. ERRORCODE=-4499, SQLSTATE=null ERRORCODE=-4499, SQLSTATE=null
Exception occurred:
com.sap.engine.bootstrap.SynchronizationException: Unable to synchronize native files for instance [ID140026]!
==============================================================================================
dev_jcontrol
=============================================================================================
Thr 4360] *** ERROR => JsfOpenShm: FtInit(SESSION, 2, 176) failed (got (rc = 0 operation successful), expected (rc = 8 already initialized)) [jsfxxshm.c 913]
[Thr 4360] *** ERROR => Can't create shared memory segment 69 (rc = 1) [jcntrxx.c 1749]
[Thr 4360] *** ERROR => Can't initialize JControl Administration [jcntrxx.c 273]
[Thr 4360] JControlCloseProgram: started (exitcode = -1)
[Thr 4360] *** ERROR => JsfCloseShm: FiDetachIndex(SESSION) failed (rc = 6 invalid argument) [jsfxxshm.c 1243]
[Thr 4360] *** ERROR => JsfCloseShm: FiDetachIndex(ALIAS) failed (rc = 6 invalid argument) [jsfxxshm.c 1250]
[Thr 4360] *** ERROR => JsfCloseShm: FiDetachIndex(SERVICE) failed (rc = 6 invalid argument) [jsfxxshm.c 1257]
=================================================================================================
log_bootstrap_ID0140026.0
==========================================================================================
Error synchronizing file [.\..\os_libs\FontManagerService_native.zip].
com.sap.engine.frame.core.configuration.InvalidPersistentDataStreamException: Could not get file from DB.
============================================================================================
Eagerly looking forward to a solution from you experts..
Thanks,
RakeshHi,
I am facing the same related problem with ECC 6.0.
My dispatcher started it is showing yellow- dialog queue standstill, J2EE status info unavailable
after some time dispatcher has stopped.
Please check my below trace file for dispatcher:
trc file: "dev_disp", trc level: 1, release: "700"
sysno 03
sid DEV
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 114
intno 20050900
make: multithreaded, Unicode, optimized
pid 13108
Fri Nov 27 02:31:55 2009
kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (03 13108) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 114 successfully loaded
shared lib "dw_xtc.dll" version 114 successfully loaded
shared lib "dw_stl.dll" version 114 successfully loaded
shared lib "dw_gui.dll" version 114 successfully loaded
shared lib "dw_mdm.dll" version 114 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3903
Fri Nov 27 02:31:59 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5361]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >sapdev_DEV_03 <
DpShMCreate: sizeof(wp_adm) 15800 (1436)
DpShMCreate: sizeof(tm_adm) 4232256 (21056)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1536)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 08290040, size: 4889440)
DpShMCreate: allocated sys_adm at 08290040
DpShMCreate: allocated wp_adm at 08292090
DpShMCreate: allocated tm_adm_list at 08295E48
DpShMCreate: allocated tm_adm at 08295E78
DpShMCreate: allocated wp_ca_adm at 0869F2B8
DpShMCreate: allocated appc_ca_adm at 086A5078
DpShMCreate: allocated comm_adm at 086A6FB8
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 08727E78
DpShMCreate: allocated gw_adm at 08727EB8
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 08727EE8
DpShMCreate: allocated wall_adm at 08727EF0
MBUF state OFF
DpCommInitTable: init table for 500 entries
Fri Nov 27 02:32:00 2009
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 1023 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 13356
argv[0] = D:\usr\sap\DEV\DVEBMGS03\exe\jcontrol.EXE
argv[1] = D:\usr\sap\DEV\DVEBMGS03\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS03_sapdev
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=2919
argv[5] = -DSAPSYSTEM=03
argv[6] = -DSAPSYSTEMNAME=DEV
argv[7] = -DSAPMYNAME=sapdev_DEV_03
argv[8] = -DSAPPROFILE=D:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS03_sapdev
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1629]
***LOG Q0K=> DpMsAttach, mscon ( sapdev.visu.com) [dpxxdisp.c 11753]
DpStartStopMsg: send start message (myname is >sapdev_DEV_03 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Fri Nov 27 02:32:01 2009
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 114
Release check o.K.
Fri Nov 27 02:32:05 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1468
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2927) [nixxi.cpp 4248]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=13356)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Fri Nov 27 02:32:40 2009
ERROR => W0 (pid 13364) died [dpxxdisp.c 14441]
ERROR => W1 (pid 13372) died [dpxxdisp.c 14441]
ERROR => W2 (pid 13380) died [dpxxdisp.c 14441]
ERROR => W3 (pid 13388) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W4 (pid 13396) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W5 (pid 13404) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W6 (pid 13412) died [dpxxdisp.c 14441]
ERROR => W7 (pid 13420) died [dpxxdisp.c 14441]
ERROR => W8 (pid 13428) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W9 (pid 13436) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W10 (pid 13444) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Nov 27 02:32:50 2009
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Thu Nov 26 21:02:50 2009
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 13364 Ended no 1 0 0
1 DIA 13372 Ended no 1 0 0
2 DIA 13380 Ended no 1 0 0
3 DIA 13388 Ended no 1 0 0
4 UPD 13396 Ended no 1 0 0
5 ENQ 13404 Ended no 1 0 0
6 BTC 13412 Ended no 1 0 0
7 BTC 13420 Ended no 1 0 0
8 BTC 13428 Ended no 1 0 0
9 SPO 13436 Ended no 1 0 0
10 UP2 13444 Ended no 1 0 0
Dispatcher Queue Statistics Thu Nov 26 21:02:50 2009
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
since last update total 8, udp 7 ( 87%), shm 1 ( 12%)
Dump of tm_adm structure: Thu Nov 26 21:02:50 2009
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Thu Nov 26 21:02:50 2009
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Nov 27 02:32:55 2009
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >sapdev_DEV_03 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (13340) (SOFT_KILL)
Stop icman
killing process (13348) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:13340 HANDLE:1564)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Nov 27 02:32:56 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:13340 HANDLE:1564)
wait for end of icman
[DpProcDied] Process lives (PID:13348 HANDLE:1568)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Nov 27 02:32:57 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:13348 HANDLE:1568)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Nov 27 02:32:58 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:13348 HANDLE:1568)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Nov 27 02:32:59 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:13348 HANDLE:1568)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Please help me to start my SAP MMC.
Thanks -
Photoshop Elements 11
Only Been using it
saying ' could not complete your request because file is not compatible with this version of Photoshop Elements'
What do i doWhich operating system are you running on?
Do you get this error when loading or using the organizer or the editor?
What are you trying to do when you get this error?
If you are using raw files, which camera (make and model) do you use to create the raw files?
If you can load the editor, which version of camera raw do you have loaded? - see Help -> about Plug-in -> Camera raw
Brian -
"Could not get the audio data from the file" error
Hi
I get a lot of "Could not get the audio data from the file" errors when opening a project. Sometimes they crash Premiere Pro CC 7.01 (Mac). But if not Premiere works as usual, with the audio.
I tried to convert the audio files (coming from Audition) from 32 to 16 bit. It worked while opening a project once, but not the following times.
Where can it come from ?
Edit: I also get this error when importing audio: "Error: Premiere Pro version 7.0 is not compatible with the Premiere Pro Plug-in version 5.7.4". Maybe it is connected.Got it! It was the Smartsound plugin making trouble. Got rid of it and no more errors.
-
how can i recover my admin name and password from my i mac. i could not get through to it.
What do you mean "I could not get through to it" Are you trying to login remotely?
-
ipod sync problems
ipod 2.2.1 touch OS10.6.8 itunes 10.6.1
The photos sync but the calendars and contents will not. I keep getting this error message...
«iTunes could not sync information to the iPod «name of iPod» because a sync session could not be started.»Greetings,
See this post: https://discussions.apple.com/message/12799057#12799057
Cheers. -
What is the best way to copy aperture library on to external hard drive? I am getting a message that say's "There was an error opening the database. The library could not be opened because the file system of the library's volume is unsupported". What does that mean? I am trying to drag libraries (with metadata) to external HD...wondering what the best way to do that is?
Kirby Krieger wrote:
Hi Shane. Not much in the way of thoughts - - but fwiw:
How is the drive attached?
Can you open large files on the drive with other programs?
Are you running any drive compression or acceleration programs (some drives arrive with these installed)?
Can you reformat the drive and try again?
Hi Kirby,
I attached the UltraMax Plus with a USB cable. The UltraMax powers the cable so power is not an issue. I can open other files. Also, there is 500GB of files on the drive so I cannot re-format it. Although, I noted I could import the entire Aperture Library. However, I do not want to create a duplicate on my machine because that would be defeating the purpose of the external drive.
Thanks,
Shane
Maybe you are looking for
-
Can I have the same photo (or a duplicate) in two different Events?
I would like to show the same photo in two different Events but can't seem to do it/ I tried creating a duplicate of the photo, but that didn't work, either - when I try to move the duplicated photo to the second Event the original photo moves as wel
-
Deduct Bank Commission at the time of F-53 on Net amount
Hi Experts, My client who want the bank commission deduction at the time of vendor outgoing payment on the net values. the bank commission is fix of Rs. 0.07 Paise Per Rs. 1000/- The scenario is as below: Client who deduct the deduction at the time
-
How to scale sdo_geometry column values?
Hi, I have two tables with spatial data, but the scales seems to be different in each one: table 1 has values with this format (-56.2344324, -34.2344243) while table 2 has values with the following format (-5623443.24, -3423442.43) that is , on the s
-
I am having a strange problem while running an SQL statement in MS SQL 2005 that uses a linked Oracle server. I am getting the following error: OLE DB provider "OraOLEDB.Oracle" for linked server "OG" returned message "ORA-01403: no data found". Msg
-
Please forgive me if this has been solved before, i've searched the forum and several pages of this forum and found nothing that will help. I had a problem with a lock up which i fixed with recovery mode, but since then (probably before, or what caus