Could not get VHB/MDB at block on USB Thumb drive

I'm trying to not have to shell out $100 for DiskWarrior and because im on a Macbook Air, with no media drive, so i think i'd have to shell for a usb optical drive too.... so if someone can help me with this stupid, stupid, occurance (which will teach me to NEVER use hfs+ again), I'd be really appreciative.
I have a PNY 64GB usb 2.0 thumbdrive and it pooped the bed on me....here is all the diagnostic information i can provide
from fsck_hfs -d:
Unable to open block device /dev/disk1: Resource busyjournal_replay(/dev/disk1) returned 16
** /dev/rdisk1 (NO WRITE)
          Using cacheBlockSize=32K cacheTotalBlock=16384 cacheSize=524288K.
   Executing fsck_hfs (version diskdev_cmds-540.1~44).
          Block 2 is not an MDB or Volume Header
          CheckForClean - could not get VHB/MDB at block 133512190
** Checking Journaled HFS Plus volume.
   Invalid B-tree node size
(3, 0)
** The volume   could not be verified completely.
          volume check failed with error 7
          volume type is pure HFS+
          primary MDB is at block 0 0x00
          alternate MDB is at block 0 0x00
          primary VHB is at block 2 0x02
          alternate VHB is at block 133512190 0x7f53bfe
          sector size = 512 0x200
          VolumeObject flags = 0x05
          total sectors for volume = 133512192 0x7f53c00
          total sectors for embedded volume = 0 0x00
from console logs:
6/29/12 9:30:42.000 AM kernel: hfs_swap_BTNode: invalid forward link (0x0a0d0321 >= 0x00001880)
6/29/12 9:30:42.000 AM kernel: hfs: node=5 fileID=4 volume=Windows7 device=/dev/disk1s1
6/29/12 9:30:42.000 AM kernel: hfs: Runtime corruption detected on Windows7, fsck will be forced on next mount.
all my files are flipping gone, but it sure kep the directories.....yay
Thanks in advance for any help

I'm trying to not have to shell out $100 for DiskWarrior and because im on a Macbook Air, with no media drive, so i think i'd have to shell for a usb optical drive too.... so if someone can help me with this stupid, stupid, occurance (which will teach me to NEVER use hfs+ again), I'd be really appreciative.
I have a PNY 64GB usb 2.0 thumbdrive and it pooped the bed on me....here is all the diagnostic information i can provide
from fsck_hfs -d:
Unable to open block device /dev/disk1: Resource busyjournal_replay(/dev/disk1) returned 16
** /dev/rdisk1 (NO WRITE)
          Using cacheBlockSize=32K cacheTotalBlock=16384 cacheSize=524288K.
   Executing fsck_hfs (version diskdev_cmds-540.1~44).
          Block 2 is not an MDB or Volume Header
          CheckForClean - could not get VHB/MDB at block 133512190
** Checking Journaled HFS Plus volume.
   Invalid B-tree node size
(3, 0)
** The volume   could not be verified completely.
          volume check failed with error 7
          volume type is pure HFS+
          primary MDB is at block 0 0x00
          alternate MDB is at block 0 0x00
          primary VHB is at block 2 0x02
          alternate VHB is at block 133512190 0x7f53bfe
          sector size = 512 0x200
          VolumeObject flags = 0x05
          total sectors for volume = 133512192 0x7f53c00
          total sectors for embedded volume = 0 0x00
from console logs:
6/29/12 9:30:42.000 AM kernel: hfs_swap_BTNode: invalid forward link (0x0a0d0321 >= 0x00001880)
6/29/12 9:30:42.000 AM kernel: hfs: node=5 fileID=4 volume=Windows7 device=/dev/disk1s1
6/29/12 9:30:42.000 AM kernel: hfs: Runtime corruption detected on Windows7, fsck will be forced on next mount.
all my files are flipping gone, but it sure kep the directories.....yay
Thanks in advance for any help

Similar Messages

  • Could not get system landscape directory client - NWDS 7.31 SP 09

    Hi Experts,
    We are unable to import development configurations from NWDI 7.4 to NWDS 7.31 for one of the developer's id. Other developers are able to import the
    configuration successfully in NWDS and are able to create projects without any issues. In fact, I am able to import the development configurations from his Id on my machine.
    The error message that is appearing is as follows: Could not get system landscape directory client.
    PFB the NWDS logs:
    null
    Error
    Tue Jan 06 12:48:58 IST 2015
    List Development Configurations failed      [Error: com.sap.ide.dii05.ui.internal.sld.SldContext  Thread[ModalContext,6,main]]
    com.sap.lcr.api.cimclient.LcrException: com.sap.lcr.api.cimclient.CIMClientException: HTTP response code: 407 (Proxy Authentication Required ( Forefront TMG requires authorization to fulfill the request. Access to the Web Proxy filter is denied.  ))
    at com.sap.lcr.api.cimclient.HttpRequestSender.newClientException(HttpRequestSender.java:719)
    at com.sap.lcr.api.cimclient.HttpRequestSender.processResponse(HttpRequestSender.java:608)
    at com.sap.lcr.api.cimclient.HttpRequestSender.send(HttpRequestSender.java:352)
    at com.sap.lcr.api.cimclient.CIMOMClient.sendImpl(CIMOMClient.java:205)
    at com.sap.lcr.api.cimclient.CIMOMClient.send(CIMOMClient.java:153)
    at com.sap.lcr.api.cimclient.CIMOMClient.enumerateInstancesImpl(CIMOMClient.java:450)
    at com.sap.lcr.api.cimclient.CIMOMClient.enumerateInstances(CIMOMClient.java:754)
    at com.sap.lcr.api.cimclient.CIMClient.enumerateInstances(CIMClient.java:989)
    at com.sap.lcr.api.sapmodel.JavaCIMObjectAccessor.enumerateInstances(JavaCIMObjectAccessor.java:213)
    at com.sap.lcr.api.sapmodel.SAP_DesignTimeConfigurationAccessor.enumerateInstances(SAP_DesignTimeConfigurationAccessor.java:164)
    at com.sap.ide.dii05.lib.internal.sld.SldBasicContext.listRemoteDevConfNames(SldBasicContext.java:197)
    at com.sap.ide.dii05.ui.internal.devconf.wizard.DevConfImportSldPage$6.run(DevConfImportSldPage.java:293)
    at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:121)
    NWDS version: 7.31 SP 09
    Error Screenshot -
    Any pointers will be highly appreciated.
    BR,
    Anurag

    Hi,
    we had some issues recently with this, and the trace also mentions proxy issues. Could you please try direct connection in that preferences  (in other words do not use proxy settings in NWDS) ?
    Is it possible that there is some kind of web-filter application installed that is blocking the request?
    I'd suggest to google for this error:
    407 (Proxy Authentication Required ( Forefront TMG requires authorization to fulfill the request. Access to the Web Proxy filter is denied.  ))
    Perhaps the problem is not even sap related.
    Is Microsoft Forefront TMG (Threat Management Gateway after some googleing) perhaps configured in the way that it is not allowing this request ? Perhaps the IT guys of your company could look into this.
    Microsoft Forefront Threat Management Gateway - Wikipedia, the free encyclopedia
    12209 Forefront TMG requires authorization to fulfill the request. Access to the Web Proxy filter is denied.
    Cheers,
    Ervin

  • Dispatcher yellow,J2EE status info unavailable,Could not get file from DB

    Hello Experts,
    I have successfully installed a ECC 6.0 server-ABAP +JAVA  system (DB2 v9.5 FP4 windows server 2008-x64 bit).
    Kernel: 700 , Patch: 185 ; SP level : rel 700 , level 17
    I upgraded JSPM sucessfully from 14 to 17.Then i was trying to apply JAVA sp's one by one using single sp option JSPM tool.
    I DEPLOYED the first sp component sucesfully but after that the next component gave warning in JSPM check that SDM is not started.
    I checked MMC.Dispatcher was YELLOW and J2EE status info unavailable. Cannot use JCMON to start SDM..option 20 gives error--cannot access shared memory
    I already tried Notes   784568 and 997510
    Relevant logs:-
    jvm_bootstrap.out
    =================================================================================================
    Error synchronizing file [.\..\os_libs\FontManagerService_native.zip].
    com.sap.engine.frame.core.configuration.InvalidPersistentDataStreamException: Could not get file from DB.
    Attempt to fully materialize lob data that is too large for the JVM.
    Disable data source property "fullyMaterializeLobData" for locator-based lob implementation. ERRORCODE=-4499, SQLSTATE=null ERRORCODE=-4499, SQLSTATE=null
    Exception occurred:
    com.sap.engine.bootstrap.SynchronizationException: Unable to synchronize native files for instance [ID140026]!
    ==============================================================================================
    dev_jcontrol
    =============================================================================================
    Thr 4360] *** ERROR => JsfOpenShm: FtInit(SESSION, 2, 176) failed (got (rc = 0 operation successful), expected (rc = 8 already initialized)) [jsfxxshm.c   913]
    [Thr 4360] *** ERROR => Can't create shared memory segment 69 (rc = 1) [jcntrxx.c    1749]
    [Thr 4360] *** ERROR => Can't initialize JControl Administration [jcntrxx.c    273]
    [Thr 4360] JControlCloseProgram: started (exitcode = -1)
    [Thr 4360] *** ERROR => JsfCloseShm: FiDetachIndex(SESSION) failed (rc = 6 invalid argument) [jsfxxshm.c   1243]
    [Thr 4360] *** ERROR => JsfCloseShm: FiDetachIndex(ALIAS) failed (rc = 6 invalid argument) [jsfxxshm.c   1250]
    [Thr 4360] *** ERROR => JsfCloseShm: FiDetachIndex(SERVICE) failed (rc = 6 invalid argument) [jsfxxshm.c   1257]
    =================================================================================================
    log_bootstrap_ID0140026.0
    ==========================================================================================
    Error synchronizing file [.\..\os_libs\FontManagerService_native.zip].
    com.sap.engine.frame.core.configuration.InvalidPersistentDataStreamException: Could not get file from DB.
    ============================================================================================
    Eagerly looking forward to a solution from you experts..
    Thanks,
    Rakesh

    Hi,
    I am facing the same related problem with ECC 6.0.
    My dispatcher started it is showing yellow-  dialog queue standstill, J2EE status info unavailable
    after some time dispatcher has stopped.
    Please check my below trace file for dispatcher:
    trc file: "dev_disp", trc level: 1, release: "700"
    sysno      03
    sid        DEV
    systemid   560 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    114
    intno      20050900
    make:      multithreaded, Unicode, optimized
    pid        13108
    Fri Nov 27 02:31:55 2009
    kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
    length of sys_adm_ext is 576 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (03 13108) [dpxxdisp.c   1239]
         shared lib "dw_xml.dll" version 114 successfully loaded
         shared lib "dw_xtc.dll" version 114 successfully loaded
         shared lib "dw_stl.dll" version 114 successfully loaded
         shared lib "dw_gui.dll" version 114 successfully loaded
         shared lib "dw_mdm.dll" version 114 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3903
    Fri Nov 27 02:31:59 2009
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5361]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >sapdev_DEV_03                           <
    DpShMCreate: sizeof(wp_adm)          15800     (1436)
    DpShMCreate: sizeof(tm_adm)          4232256     (21056)
    DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
    DpShMCreate: sizeof(comm_adm)          528064     (1048)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0     (96)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1536)
    DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 08290040, size: 4889440)
    DpShMCreate: allocated sys_adm at 08290040
    DpShMCreate: allocated wp_adm at 08292090
    DpShMCreate: allocated tm_adm_list at 08295E48
    DpShMCreate: allocated tm_adm at 08295E78
    DpShMCreate: allocated wp_ca_adm at 0869F2B8
    DpShMCreate: allocated appc_ca_adm at 086A5078
    DpShMCreate: allocated comm_adm at 086A6FB8
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 08727E78
    DpShMCreate: allocated gw_adm at 08727EB8
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 08727EE8
    DpShMCreate: allocated wall_adm at 08727EF0
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    Fri Nov 27 02:32:00 2009
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation view
    <EsNT> Using memory model view.
    <EsNT> Memory Reset disabled as NT default
    <ES> 1023 blocks reserved for free list.
    ES initialized.
    J2EE server info
      start = TRUE
      state = STARTED
      pid = 13356
      argv[0] = D:\usr\sap\DEV\DVEBMGS03\exe\jcontrol.EXE
      argv[1] = D:\usr\sap\DEV\DVEBMGS03\exe\jcontrol.EXE
      argv[2] = pf=D:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS03_sapdev
      argv[3] = -DSAPSTART=1
      argv[4] = -DCONNECT_PORT=2919
      argv[5] = -DSAPSYSTEM=03
      argv[6] = -DSAPSYSTEMNAME=DEV
      argv[7] = -DSAPMYNAME=sapdev_DEV_03
      argv[8] = -DSAPPROFILE=D:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS03_sapdev
      argv[9] = -DFRFC_FALLBACK=ON
      argv[10] = -DFRFC_FALLBACK_HOST=localhost
      start_lazy = 0
      start_control = SAP J2EE startup framework
    DpJ2eeStart: j2ee state = STARTED
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1629]
    ***LOG Q0K=> DpMsAttach, mscon ( sapdev.visu.com) [dpxxdisp.c   11753]
    DpStartStopMsg: send start message (myname is >sapdev_DEV_03                           <)
    DpStartStopMsg: start msg sent
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    Fri Nov 27 02:32:01 2009
    CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpJ2eeLogin: j2ee state = CONNECTED
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 114
    Release check o.K.
    Fri Nov 27 02:32:05 2009
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4248]
    ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1468
        (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2927) [nixxi.cpp    4248]
    DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
    DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=13356)
    ERROR => DpProcKill: kill failed [dpntdisp.c   371]
    DpIJ2eeShutdown: j2ee state = SHUTDOWN
    Fri Nov 27 02:32:40 2009
    ERROR => W0 (pid 13364) died [dpxxdisp.c   14441]
    ERROR => W1 (pid 13372) died [dpxxdisp.c   14441]
    ERROR => W2 (pid 13380) died [dpxxdisp.c   14441]
    ERROR => W3 (pid 13388) died [dpxxdisp.c   14441]
    my types changed after wp death/restart 0xbf --> 0xbe
    ERROR => W4 (pid 13396) died [dpxxdisp.c   14441]
    my types changed after wp death/restart 0xbe --> 0xbc
    ERROR => W5 (pid 13404) died [dpxxdisp.c   14441]
    my types changed after wp death/restart 0xbc --> 0xb8
    ERROR => W6 (pid 13412) died [dpxxdisp.c   14441]
    ERROR => W7 (pid 13420) died [dpxxdisp.c   14441]
    ERROR => W8 (pid 13428) died [dpxxdisp.c   14441]
    my types changed after wp death/restart 0xb8 --> 0xb0
    ERROR => W9 (pid 13436) died [dpxxdisp.c   14441]
    my types changed after wp death/restart 0xb0 --> 0xa0
    ERROR => W10 (pid 13444) died [dpxxdisp.c   14441]
    my types changed after wp death/restart 0xa0 --> 0x80
    DP_FATAL_ERROR => DpWPCheck: no more work processes
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=1593
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri Nov 27 02:32:50 2009
    NiISelect: TIMEOUT occured (10000ms)
    dump system status
    Workprocess Table (long)               Thu Nov 26 21:02:50 2009
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program          Cl  User         Action                    Table
    0 DIA    13364 Ended         no      1   0        0                                                                         
    1 DIA    13372 Ended         no      1   0        0                                                                         
    2 DIA    13380 Ended         no      1   0        0                                                                         
    3 DIA    13388 Ended         no      1   0        0                                                                         
    4 UPD    13396 Ended         no      1   0        0                                                                         
    5 ENQ    13404 Ended         no      1   0        0                                                                         
    6 BTC    13412 Ended         no      1   0        0                                                                         
    7 BTC    13420 Ended         no      1   0        0                                                                         
    8 BTC    13428 Ended         no      1   0        0                                                                         
    9 SPO    13436 Ended         no      1   0        0                                                                         
    10 UP2    13444 Ended         no      1   0        0                                                                         
    Dispatcher Queue Statistics               Thu Nov 26 21:02:50 2009
    ===========================
    --------++++--
    +
    Typ
    now
    high
    max
    writes
    reads
    --------++++--
    +
    NOWP
    0
    2
    2000
    6
    6
    --------++++--
    +
    DIA
    5
    5
    2000
    5
    0
    --------++++--
    +
    UPD
    0
    0
    2000
    0
    0
    --------++++--
    +
    ENQ
    0
    0
    2000
    0
    0
    --------++++--
    +
    BTC
    0
    0
    2000
    0
    0
    --------++++--
    +
    SPO
    0
    0
    2000
    0
    0
    --------++++--
    +
    UP2
    0
    0
    2000
    0
    0
    --------++++--
    +
    max_rq_id          12
    wake_evt_udp_now     0
    wake events           total     8,  udp     7 ( 87%),  shm     1 ( 12%)
    since last update     total     8,  udp     7 ( 87%),  shm     1 ( 12%)
    Dump of tm_adm structure:               Thu Nov 26 21:02:50 2009
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    Workprocess Comm. Area Blocks               Thu Nov 26 21:02:50 2009
    =============================
    Slots: 300, Used: 1, Max: 0
    --------++--
    +
    id
    owner
    pid
    eyecatcher
    --------++--
    +
    0
    DISPATCHER
    -1
    WPCAAD000
    NiWait: sleep (5000ms) ...
    NiISelect: timeout 5000ms
    NiISelect: maximum fd=1593
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri Nov 27 02:32:55 2009
    NiISelect: TIMEOUT occured (5000ms)
    DpHalt: shutdown server >sapdev_DEV_03                           < (normal)
    DpJ2eeDisableRestart
    DpModState: buffer in state MBUF_PREPARED
    NiBufSend starting
    NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIModState: change state to SHUTDOWN
    DpModState: change server state from STARTING to SHUTDOWN
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    Stop work processes
    Stop gateway
    killing process (13340) (SOFT_KILL)
    Stop icman
    killing process (13348) (SOFT_KILL)
    Terminate gui connections
    wait for end of work processes
    wait for end of gateway
    [DpProcDied] Process lives  (PID:13340  HANDLE:1564)
    waiting for termination of gateway ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1593
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri Nov 27 02:32:56 2009
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died  (PID:13340  HANDLE:1564)
    wait for end of icman
    [DpProcDied] Process lives  (PID:13348  HANDLE:1568)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1593
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri Nov 27 02:32:57 2009
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:13348  HANDLE:1568)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1593
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri Nov 27 02:32:58 2009
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:13348  HANDLE:1568)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1593
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri Nov 27 02:32:59 2009
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:13348  HANDLE:1568)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1593
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Please help me to start my SAP MMC.
    Thanks

  • Could not get access to download area on SAP Service Marketplace

    Hi All,
    When trying to download the SAP Mobile Execution for Motorola software in the download center in the Application and User Management work center, I get the following error message:
    "Could not get access to download area on SAP Service Marketplace."
    I have also search for this software in the Service Marketplace, but to no avail.
    I was hoping someone could point me in the direction of where I can download this software, or ideally the cause and solution to this error message.
    Thanks,
    John

    Hi John,
    Issue might be due to incorrect data in the system i.e., license codes assigned to your contract may be invalid or expired or Contract/ order is blocked due to payment issues.
    These information has to be checked in detail.
    Please report a incident.
    Thanks
    Lokesh Sharma

  • I could not get ExportPDF to work. Something about a network error when trying to sign in.

    I could not get ExportPDF to work. Trying to convert a pdf to a Word document. Got an error message. Something about a network error when attempting to sign in.

    Try the following:
    1. Reset
    Hold the Sleep and Home button down until you see the Apple logo
    2. Restore:
    http://support.apple.com/kb/HT1414
    3. Recovery:
    http://support.apple.com/kb/HT1808

  • Could not getting field values from form

    hi,
    hellow, can you help me for solving the bellow problem
    i have form its enctype attribute of form tag is setted as multipart/form-data. when i am submiting this form, i call a request.getParameter(); in the submitting jsp file. But for any controls such as text,checkbox,select box etc could not get its corresponding value.

    Its obvious why its not picking up the change in the second action.
    Lets see...
    Here is your case I
    You get the populated form which is also put in the request with updated value from the JSP....
    (1)
    protected Forward updateGoalObjective(GoalsForm form)
    form.setGoalId(44); //int field set to 44
    return new Forward("success");
    You set one of the fields some other value....in one but how will the second action know about it???
    You try to execute the second action and the action grabs the form from the request again. This is the original form submitted by the JSP so you still see that value...
    You will have to pass in the customized or processed form for the form to be able to get it...
    protected Forward showGoal(GoalsForm form)
    System.out.println(form.getGoalId()); //prints 68
    return new Forward("success");
    In your second case you create a new form...why would you want to do that if you have a form value being set in JSP??
    The answer is you should be doing something Like this:
    * @jpf:action form="goalsForm"
    * @jpf:forward name="success" path="showGoal.do"
    protected Forward updateGoalObjective(GoalsForm form)
    //other code
    form.setGoalId(44); //int field set to 44
    return new Forward("success", form);
    * @jpf:action form="goalsForm"
    * @jpf:forward name="success" path="Goal.jsp"
    protected Forward showGoal(GoalsForm form)
    System.out.println(form.getGoalId()); //prints 68
    return new Forward("success");
    }

  • After connecting my Apple TV this morning, I have no sound. It is hooked up to play through my television speakers. Any ideas on how to get sound? Also, I tried hooking it up through my surround receiver, but could not get it to come up on my ty screen.

    After connecting my Apple TV this morning, I have no sound. It is hooked up to play through my television speakers. Any ideas on how to get sound? Also, I tried hooking it up through my surround receiver, but could not get it to come up on my ty screen, what can I do to correct this problem?

    Have you tried adjusting the "Audio Out" and the "Dolby Digital" settings in settings > audio and video? It may be worth trying several combinations of these settings, although typically it is the "Dolby Digital" setting that causes most problems for users.
    Also make sure that you have correctly mapped the input port on your sound system to the output, if you are unsure about how to do this, refer to the manual that came with your sound system.
    Have you tried playing various content sources (i.e. podcasts, music, iTunes Store video, other video etc), do you have the same problem with all types of content? If you use optical you might also check that you can see a red light at the end of your optical audio cable. Is your optical audio cable plugged straight into your sound system, or does it go through a switch or other device?

  • Downloading artwork - "could not get artwork for some albums"

    This might have been addressed before, but I browsed the forum and couldn't find a thread. Sorry if it's been gone over several times.
    I live in Turkey and I've added albums to my iTunes. I checked the box in the Get Info next to Artwork and I selected Get Album Artwork from the Advanced tab. It scans through all the albums and then says "could not get artwork for some albums." "Some" albums means all of them actually. And the error tab details say "artwork not available." I also tried getting artwork by right clicking on a single album but I get the same error. Before it was a 609 error. Now it just says not available.
    I logged out of the store, quit iTunes, loaded it again, re-signed in to the store and tried to get artwork that way, but got the same result. No artwork. The albums are things like Let It Be, Allman Brothers, Ella Fitzgerald... Albums that should certainly have artwork available.
    I'm using Windows Vista.
    Has anyone had and conquered this problem? Any ideas on what I should do? I have 300+ albums, so getting the cover art from wikipedia would be a bit tedious. I'd appreciate any help anyone can give!

    Hello, Welcome to Apple Discussions.
    Are your songs from Audio CDs or iTunes Store? If not you may need to manually find the album artwork for them as these songs may not be listed in the iTunes Store database for your region.
    iTunes: Album art may not download properly
    http://support.apple.com/kb/TS1815
    iTunes will only download album artwork for songs that it can find in the iTunes Store. iTunes will check each song in your iTunes library and attempt to match it up with a song in the iTunes Store. If the data matches, iTunes will download the album artwork from the iTunes Store and add it to the song in your iTunes library. If iTunes does not find a particular song's artwork in the iTunes Store, you will not see an alert message. iTunes simply does not download artwork for that song.

  • Hi...m using a mac pro quad core.....its not booting up...i can only  see the apple logo and a circle loading...could not get into the login screen

    hi...m using a mac pro quad core.....its not booting up...i can only  see the apple logo and a circle loading...could not get into the login screen...any suggestions please.....m in the middle of a project and now i have got this one
    regards,
    v.s.bharan

    Welcome to Apple Discussions!
    Do you keep your data backed up?
    If not, you should always do so*:
    http://www.macmaps.com/backup.html
    You never know when a hard drive or a directory might go bad.  Having a bootable clone is a must.
    That link also shows you some tools you can use to recover data.
    If you aren't backed up, try buying those tools first, before attempting to repair the directory.
    Directory issues can be fixed with these tools*:
    http://www.macmaps.com/directoryfaq.html

  • OWA 2007 Issue : Microsoft.Exchange.Data.Storage.VirusMessageDeletedException Could not get properties.

    Hi I am facing an issue with Outlook web access on my production server Exchange Server 2007 with Sp1. When i try to reply or forward a message from OWA it displays The message has been deleted due to a virus threat . Kindly refer to the below error details. I have a box with all 3 roles installed I do not have an Edge Server . IO have installed Forefront on the same Box as my exchange Server.Below is the Detail of  the error . Kindly Help
    A virus was found in this message and it has been deleted. For further
    information, please contact technical support for your organization.
    Click here to continue working.
     Copy error details to clipboard
     Show details
    Request
    Url: https://192.168.7.12:443/owa/forms/basic/BasicEditMessage.aspx?ae=Item&t=IPM.Note&a=Reply&id=RgAAAACFMIZq8d7LTqcPs%2bRZA5g%2bBwBDDZWeCojSQZ1bZZ7Ga%2fkWAAAAeCc6AABDDZWeCojSQZ1bZZ7Ga%2fkWAA5iTbjpAAAJ
    User host address: 192.168.7.11
    User: Munendra Pal Gangwar
    EX Address: /o=First Organization/ou=Exchange Administrative Group
    (FYDIBOHF23SPDLT)/cn=Recipients/cn=mp_gangwar
    SMTP Address: [email protected]
    OWA version: 8.1.336.0
    Mailbox server: PFCDELEXCH01.PFCDOMAIN
    Exception
    Exception type: Microsoft.Exchange.Data.Storage.VirusMessageDeletedException
    Exception message: Could not get properties.
    Call stack
    Microsoft.Exchange.Data.Storage.MapiPropertyBag.GetProperties(IList`1
    propertyDefinitions)
    Microsoft.Exchange.Data.Storage.StoreObjectPropertyBag.InternalLoad(PropertyDefinition[]
    properties, Boolean forceReload)
    Microsoft.Exchange.Data.Storage.StoreObjectPropertyBag..ctor(StoreSession
    session, MapiProp mapiProp, Origin origin, PropertyDefinition[]
    autoloadProperties, Boolean canSaveOrDisposeMapiProp)
    Microsoft.Exchange.Data.Storage.StoreObjectPropertyBag..ctor(StoreSession
    session, MapiProp mapiProp, Origin origin, PropertyDefinition[]
    autoloadProperties)
    Microsoft.Exchange.Data.Storage.Item.InternalBindItem(StoreSession
    session, StoreObjectId itemId, Byte[] changeKey, ItemBindOption
    itemBindOption, PropertyDefinition[] allPropsToLoad)
    Microsoft.Exchange.Data.Storage.Item.InternalBind[T](StoreSession
    session, StoreId id, ItemBindOption itemBindOption,
    PropertyDefinition[] allPropsToLoad)
    Microsoft.Exchange.Data.Storage.Item.InternalBind[T](StoreSession
    session, StoreId id, PropertyDefinition[] allPropsToLoad)
    Microsoft.Exchange.Clients.Owa.Core.Utilities.GetItem[T](StoreSession
    storeSession, StoreId storeId, Boolean forceAsMessageItem,
    PropertyDefinition[] prefetchProperties)
    Microsoft.Exchange.Clients.Owa.Core.Utilities.GetItem[T](UserContext
    userContext, StoreId storeId, Boolean forceAsMessageItem,
    PropertyDefinition[] prefetchProperties)
    Microsoft.Exchange.Clients.Owa.Core.Utilities.GetItem[T](UserContext
    userContext, StoreId storeId, PropertyDefinition[] prefetchProperties)
    Microsoft.Exchange.Clients.Owa.Basic.EditMessage.LoadMessage()
    Microsoft.Exchange.Clients.Owa.Basic.EditMessage.OnLoad(EventArgs e)
    System.Web.UI.Control.LoadRecursive()
    System.Web.UI.Page.ProcessRequestMain(Boolean
    includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    Inner Exception
    Exception type: Microsoft.Mapi.MapiExceptionVirusMessageDeleted
    Exception message: MapiExceptionVirusMessageDeleted: Unable to get
    properties on object. (hr=0x80004005, ec=1294) Diagnostic context:
    Lid: 18969 EcDoRpcExt2 called [length=479] Lid: 27161 EcDoRpcExt2
    returned [ec=0x0][length=422][latency=15] Lid: 23226 --- ROP Parse
    Start --- Lid: 27962 ROP: ropOpenMessage [3] Lid: 17082 ROP Error:
    0x50E Lid: 26977 Lid: 21921 StoreEc: 0x50E Lid: 27962 ROP:
    ropExtendedError [250] Lid: 1494 ---- Remote Context Beg ---- Lid:
    1238 Remote Context Overflow Lid: 14164 StoreEc: 0xFFFFFA1D PropTag:
    0x672D0003 Lid: 8660 StoreEc: 0x8004010F PropTag: 0x672D0003 Lid:
    21970 StoreEc: 0x8004010F PropTag: 0x672D0003 Lid: 23921 StoreEc:
    0x3EC Lid: 21970 StoreEc: 0x8004010F PropTag: 0x672F0014 Lid: 23921
    StoreEc: 0x3EC Lid: 21970 StoreEc: 0x8004010F PropTag: 0x6708000B Lid:
    21970 StoreEc: 0x8004010F PropTag: 0xE960102 Lid: 21970 StoreEc:
    0x8004010F PropTag: 0x6708000B Lid: 21970 StoreEc: 0x8004010F PropTag:
    0xE960102 Lid: 21970 StoreEc: 0x8004010F PropTag: 0x67760102 Lid:
    25394 Lid: 19506 Lid: 27698 Lid: 11285 StoreEc: 0x50E Lid: 21970
    StoreEc: 0xFFFFFC07 PropTag: 0x30080040 Lid: 25818 Lid: 6153 StoreEc:
    0x50E Lid: 25906 Lid: 5249 StoreEc: 0x50E Lid: 1750 ---- Remote
    Context End ---- Lid: 27962 ROP: ropGetPropsSpecific [7] Lid: 17082
    ROP Error: 0x4B9 Lid: 26465 Lid: 21921 StoreEc: 0x4B9 Lid: 27962 ROP:
    ropExtendedError [250] Lid: 1494 ---- Remote Context Beg ---- Lid:
    26426 ROP: ropGetPropsSpecific [7] Lid: 1750 ---- Remote Context End
    ---- Lid: 26849 Lid: 21817 ROP Failure: 0x4B9 Lid: 20385 Lid: 28577
    StoreEc: 0x50E Lid: 32001 Lid: 29953 StoreEc: 0x50E
    Call stack
    Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32
    hresult, Object objLastErrorInfo)
    Microsoft.Mapi.MapiProp.GetProps(PropTag[] propTagsRequested)
    Microsoft.Exchange.Data.Storage.MapiPropertyBag.GetProperties(IList`1
    propertyDefinitions)

    I had this same issue, except I have Symantec mail security not Forefront. It wound up being a line in the adult content filter. For whatever reason, they included "If you received this email" as one of the literal strings. This is probably part
    of almost every corporate confidentiality clause I have ever seen!! go figure......
    Thanks for the event log hint- since I have the adult content set to delete, I had no good tracking mechanism in Exhange or SMSME. I set email notifications for the future on these.
    Brent
    I had this same problem, but I have ESET Mail Security Server. in some one case the problem y solved if I attach the "user@domain" in the "white
    List". But in many case the problem is continuous. I have Exchange 2007 in MS Windows Server 2003.
    Thanks for yours help.

  • An error occured while creating the new dataset Could not get type informat

    Uses: Windows XP Pro SP3+; OracleXE; Oracle 8i Client; ODP.NET; Visual Studio 2005 PRO;
    I had OracleXE and was using OracleXE's Oracle.DataAccess Version 10.2.0.100 which was located in C:\oraclexe\app\oracle\product\10.2.0\server\BIN. Then to use Oracle Developer Tools for VS, I installed ODAC where the Oracle.DataAccess's version was 2.111.6.20.
    Everything connected via SqlPlus and even was able to Oracle XE Home page and was able to loginto it. Further, was even able to create connection with Oracle Dot Net Provider. The problem was created when I tried to create a datasource from DataSource Menu in VS.2005. It was giving an error saying "An error occured while creating the new dataset Could not get type information for dataset". However I wittnessed that Dataset is been created in Solutions Explorer but not in Data Source Tab. Further researching I was able to create Datasets with Microsofts Oracle Data provider with out any issue.
    My Path variable list the following:
    C:\app\Administrator\product\11.1.0\client_1;
    C:\app\Administrator\product\11.1.0\client_1\bin;
    C:\oraclexe\app\oracle\product\10.2.0\server\bin;
    C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\;
    C:\Program Files\Borland\BDS\4.0\Bin;
    C:\PROGRA~1\Borland\Delphi5\Projects\Bpl;
    C:\PROGRA~1\Borland\vbroker\jre\Bin;
    C:\PROGRA~1\Borland\vbroker\Bin;
    C:\PROGRA~1\Borland\Delphi5\Bin;C:\orant\bin;
    C:\WINDOWS\system32;C:\WINDOWS;
    C:\WINDOWS\System32\Wbem;
    c:\Program Files\Microsoft SQL Server\90\Tools\binn\;
    C:\Program Files\Microsoft SQL Server\80\Tools\BINN;
    C:\Program Files\java\jdk1.6.0_07\bin.
    Further I got 2 Oracle Homes one which C:\orant and other is located in C:\app\Administrator\product\11.1.0\client_1.
    Also noted that while deploying at client site I started gett'n this error:
    "Unable to install or run the application. The application requires that assembly Oracle.DataAcces version be installed in Global Assembly Cache First."
    Is it due to change in the production machine? Any help in this regard is greatly appreciated.

    Hi Pushpa,
    Which enhancement package are you on currently? This is observed in cases where originals in DIR's are invisible and sometimes error message 26296 occurs in transaction CV01n. Hence,please check your entries in the table SDOKPROP to avoid such a problem in your system.
    Further,suggest you explore if the below resolutions can be adopted in your case.
    http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=10321987
    http://wiki.sdn.sap.com/wiki/display/PLM/OriginalsinvisibleafterEHP3or+EHP4
    Regards,
    Pradeepkumar haragoldavar

  • Could not get schema Object:java.sql.SQLSyntaxErrorException ora-904

    All of a sudden I get
    Could not get schema Object:java.sql.SQLSyntaxErrorException: ORA-00904: "SYS"."O"."NAME": ongeldige ID
    when doing anything in the tables tree in the connections pane
    The only thing I set recently is pga_aggregate_target
    Environment
    Oracle 11.2.0.1
    OS Windows Vista Ultimate sp2
    Sql developer 2.1.1.64.39 with its own JDK
    As the download links on OTN are broken I can not upgrade, and I'd rather not work in command line sqlplus.
    Help!!!
    Sybrand Bakker
    Senior Oracle DBA

    My copy of sqldeveloper isn't located in that directory. Would that matter?
    In the mean time I have disabled filtering the tables node. Opening the tables node doesn't result in exceptions anymore.
    Now, when I click on any table in that node I get 4 identical ora-904 error messages for sys.o.name for any table.
    Apparently it is querying either the all_objects view and it thinks it is querying sys.obj$.
    I didn't yet enable sql_trace for the session, I'm more or less giving up on sqldeveloper. I can not use the space bar in any datagrid, sqldeveloper has always been extreemly unresponsive when navigating the schema browser (as opposed to Toad), etc, etc. Too bad I bought Sue Harpers book, but I think I will be de-installing sqldeveloper soon.
    Sybrand Bakker
    Senior Oracle DBA

  • Could not get IOR from Domino Server while provisioning Lotus Notes

    Hi all,
    There are two servers that have OIM installed, development server and test server. From development server, we can
    provision to Lotus Notes just fine. But for test server everytime when
    provision to Lotus Notes. There will be an exception
    NotesException: Could not get IOR from Domino Server: http://10.3.100.61:63148/diiop_ior.txt
    From test server
    I can access the URL http://10.3.100.61:63148/diiop_ior.txt using Internet Explorer
    I can telnet to 10.3.100.61 63148
    I can use connector testing program and it work fine
    All configuration and jar files are the same as development server
    There is no firewall or antivirus running in both systems.
    Both server is virtual server using VMWare.
    OS: Windows2003R2 Enterprise
    DB: Oracle 10gR2 10.2.0.2
    AS: Oracle AS 10g 10.1.3.3.0
    OIM 9.1.0
    Lotus Notes Connector 9.0.4.2
    Thank you.
    Satit
    The error is as below
    =================================================
    INFO,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init
    INFO,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init
    DEBUG,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init : Host 10.3.100.61
    DEBUG,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init : Port 63148
    DEBUG,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init : Admin Pongtape Ungkawanish/Telecom./Central Support/Fin./KK_Bangkok/TH
    DEBUG,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init : Certifier OU
    DEBUG,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init : Before session
    08/11/11 11:24:26 Running setTimeoutParameters
    08/11/11 11:24:26 Running Connect
    INFO,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LNotesConnectionUtil::getSession
    INFO,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LNotesConnectionUtil::getSession : ***Non-Secure Mode
    ERROR,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LNotesConnectionUtil::getSession : ***Connection refused to Lotus Notes......
    NotesException: Could not get IOR from Domino Server: http://10.3.100.61:63148/diiop_ior.txt
         at lotus.domino.NotesFactory.requestIORPlain(Unknown Source)
         at lotus.domino.NotesFactory.requestIORUsingArgs(Unknown Source)
         at lotus.domino.NotesFactory.getIOR(Unknown Source)
         at lotus.domino.NotesFactory.createSessionUP(Unknown Source)
         at lotus.domino.NotesFactory.createSession(Unknown Source)
         at com.thortech.xl.Integration.HostAccess.LNotesConnectionUtil.getSession(Unknown Source)
         at com.thortech.xl.Integration.HostAccess.LotusNotesProvision.connect(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpLNCREATEUSER.CONNECT(adpLNCREATEUSER.java:449)
         at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpLNCREATEUSER.implementation(adpLNCREATEUSER.java:160)
         at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
         at com.thortech.xl.ejb.beansimpl.tcProvisioningOperationsBean.retryTasks(Unknown Source)
         at com.thortech.xl.ejb.beans.tcProvisioningOperationsSession.retryTasks(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.SecurityRoleInterceptor.invoke(SecurityRoleInterceptor.java:47)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
         at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
         at tcProvisioningOperations_RemoteProxy_6ocop18.retryTasks(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.evermind.server.rmi.RmiMethodCall.run(RmiMethodCall.java:53)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
         at java.lang.Thread.run(Thread.java:595)
    Caused by: java.lang.NullPointerException
         at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:781)
         at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:669)
         at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:913)
         ... 45 more
    INFO,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],Unable to connect to the target. Attempting to reconnect after delay of 2000ms.......
    INFO,11 Nov 2008 11:24:28,110,[ADAPTER.LOTUSNOTES],LNotesConnectionUtil::getSession
    INFO,11 Nov 2008 11:24:28,110,[ADAPTER.LOTUSNOTES],LNotesConnectionUtil::getSession : ***Non-Secure Mode
    ERROR,11 Nov 2008 11:24:28,110,[ADAPTER.LOTUSNOTES],LNotesConnectionUtil::getSession : ***Connection refused to Lotus Notes......
    NotesException: Could not get IOR from Domino Server: http://10.3.100.61:63148/diiop_ior.txt
         at lotus.domino.NotesFactory.requestIORPlain(Unknown Source)
         at lotus.domino.NotesFactory.requestIORUsingArgs(Unknown Source)
         at lotus.domino.NotesFactory.getIOR(Unknown Source)
         at lotus.domino.NotesFactory.createSessionUP(Unknown Source)
         at lotus.domino.NotesFactory.createSession(Unknown Source)
         at com.thortech.xl.Integration.HostAccess.LNotesConnectionUtil.getSession(Unknown Source)
         at com.thortech.xl.Integration.HostAccess.LNotesConnectionUtil.getSession(Unknown Source)
         at com.thortech.xl.Integration.HostAccess.LotusNotesProvision.connect(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpLNCREATEUSER.CONNECT(adpLNCREATEUSER.java:449)
         at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpLNCREATEUSER.implementation(adpLNCREATEUSER.java:160)
         at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
         at com.thortech.xl.ejb.beansimpl.tcProvisioningOperationsBean.retryTasks(Unknown Source)
         at com.thortech.xl.ejb.beans.tcProvisioningOperationsSession.retryTasks(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.SecurityRoleInterceptor.invoke(SecurityRoleInterceptor.java:47)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
         at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
         at tcProvisioningOperations_RemoteProxy_6ocop18.retryTasks(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.evermind.server.rmi.RmiMethodCall.run(RmiMethodCall.java:53)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
         at java.lang.Thread.run(Thread.java:595)
    Caused by: java.lang.NullPointerException
         at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:781)
         at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:669)
         at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:913)
         ... 46 more

    check if DIIOP service is turned on at the Lotus Domino side...
    Oleg.

  • Could not get Custom screen in me21n after implementing Badi ME_GUI_PO_CUST

    Hi.,
    I created implementation for the badi ME_GUI_PO_CUST... but i could not get the Tab and screen in header tab.
    also used below  link in the  forum to correct the issue ....but dint help me .
    Custom screen not displaying using BADI ME_GUI_PO_CUST
    Pls help me how to go abt...
    Thanks,
    Ranjitha.

    Hi ....
    Now the tab is reflecting in me22n & me23n but not in me21n ......can anybody tell what could be the reason?
    thanks
    ranjitha

  • Java.lang.Exception: Could not get name for DC project

    Hello Experts,
    We have a code which is downloaded from SVN repository.
    I have imported the code from my desktop into NWDS and when I try to deploy it throws,
    java.lang.Exception: Could not get name for DC project
    I have referred few threads in SCN and solution suggested is to change the workspace and create a new DC & copy the _comp from old DC.
    I tried the above solution but there are lot of build errors as we have few RFC models and it is throwing build errors for missing model reference.
    Kindly help me on how to fix the error.
    Thanks, Swarnaprakash

    Dear Swarnaprakash,
    The Web Dynpro DCs Import C:\----\user\.dtc\LocalDevelopment\DCs\sap.com\test and
    the related package for DC  is missing once check it after try to import.
    Depending on which Java compiler preferences are set, you may see some
    warnings in the "Task" view after importing the project. If the severity level for problems of type "Unused imports" (set in Preferences – Java – Compiler) has the value "Warning", the compiler will issue a warning for unused import references. Ignore these warnings!
    Still You getting means delete your .metadata before take the backup.after open the NWDS again it will set new configurations in your system.
    Thanks & Regards,
    Durga Rao.

Maybe you are looking for

  • How can I format a movie file so it plays on FF3.6? my mp4 files are blocked due to a quicktime issue.

    Creating a landing page for a client with embedded video. She prefers not to embed a YouTube video on her site. Is there a way I can embed an mp4 file in her site so that it will play in firefox 3.6? Now it is trying to launch quicktime, which firefo

  • How to broadcast live camera streaming

    Hi, I am new in flash and have a project of virtual classroom, which consists white board, video streaming (Teacher and Students) and chat component. I want to capture video from web cam of teacher and students by using flash and publish it on my vir

  • Connecting to a cable box

    I wanting to add an iMac because i'm limited on space.  Does anyone know if you can conect a coxial cable from a cable box for tv playback?  Thanks for your help

  • MIR7 doesn't get PO and PO release strategy

    I can see PO item 10, 10000 MYR in ME23N, and it is already released. In MIR7, PO reference tab, I put PO number and item number, but mesages says no item number. and it didn't populate item from PO. what's the reason? also I create PR and released P

  • [SOLVED] No Sound through HDMI port in Intel after power save

    Hi, I build an HTPC with Arch inside. I output the sound into the HDTV through the HDMI port of the motherboard, following the instruction of the archwiki. Both, the audio and the video are from the motherboard (i.e, I don't have external video or au