Could not import tables with oci10g\11g connection
Hi All,
I am using obiee 11g and oracle 11g database for windows64 bit . I could not import the tables from oracle database in admin using OCI 10\11g.
I did copy tnsnames.ora to {Oracle_BI1}\network\admin directory & {oracle_common}\network\admin directory and Set up TNS_ADMIN to{Oracle_BI1}\network\admin
In addition to that I have set oracle_home to {Oracle_BI1} , path to {Oracle_BI1}\bin , oracle_sid to ORCL. In the user.cmd command too I have set tns_name{Oracle_BI1}\network\admin
When i do lsnrctl or try to open sqlplus , it shows the error. I even copied listener file to {Oracle_BI1}\network\admin directory & {oracle_common}\network\admin directory and Set up TNS_ADMIN to{Oracle_BI1}\network\admin
Do I need to revert the oracle_home,path,tns_admin to original one C:\app\user\product\11.2.0\dbhome_1....
Am I missing anything?
Thanks,
Vishal
When you add tns entry at ORACLE_HOME/network/admin that should work.
Try using tns entry at Data source at connection pool like
IT =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = foo)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = foo.corp)
)
Similar Messages
-
Getting this messg on Factime "could not sign in, check your network connection", but I have Wifi activated and working with internet?? what can I do?
Usually it's because you are not making internet connection via wifi. Open Safari and see if it connects.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Cheers, Tom -
I'm trying to sync my iPhone 3G S to my computer. Midway through I get a message "iTunes cannot backup the iPhone because a session could not be started with the iPhone." I have not connected my phone to any other computer and this just began happening within the last day or so.
PLEASE HELP!!One of your backup files might be corrupt. Try following the steps in this article to correct the issue: http://support.apple.com/kb/ts2529
-
After downloadinf iso 7 my imessage and facetime will not activate. It says to sign in using itunes password then when I try imessage says it could not sign in please check network connection. My network says its connected??????
see if this helps
http://support.apple.com/kb/TS4268
Peace, Clyde -
Hi Gurus,
I am trying to load a HANA column table using the import function and get the following error even though the mappings from the file to the table are 1:1.
I get the following errors:
Error 1: SAP DBTech JDBC: Result set is positioned before first row.
Error 2: SAP DBTech JDBC: [259] (at 26): invalid table name: Could not find table/view RS_POOL_CLUSTER_TABLES in schema SYSTEM: line 1 col 27 (at pos 26)
With the following stack trace:
com.sap.db.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: [259] (at 26): invalid table name: Could not find table/view RS_POOL_CLUSTER_TABLES in schema SYSTEM: line 1 col 27 (at pos 26)
at com.sap.db.jdbc.exceptions.SQLExceptionSapDB.createException(SQLExceptionSapDB.java:334)
at com.sap.db.jdbc.exceptions.SQLExceptionSapDB.generateDatabaseException(SQLExceptionSapDB.java:165)
at com.sap.db.jdbc.packet.ReplyPacket.buildExceptionChain(ReplyPacket.java:100)
at com.sap.db.jdbc.ConnectionSapDB.execute(ConnectionSapDB.java:1141)
at com.sap.db.jdbc.ConnectionSapDB.execute(ConnectionSapDB.java:888)
at com.sap.db.jdbc.StatementSapDB.sendCommand(StatementSapDB.java:929)
at com.sap.db.jdbc.StatementSapDB.sendSQL(StatementSapDB.java:978)
at com.sap.db.jdbc.StatementSapDB.execute(StatementSapDB.java:256)
at com.sap.db.jdbc.StatementSapDB.executeQuery(StatementSapDB.java:401)
at com.sap.db.jdbc.trace.Statement.executeQuery(Statement.java:131)
at com.sap.ndb.studio.bi.dataprovisioning.util.DBUtil.getPoolTables(DBUtil.java:200)
at com.sap.ndb.studio.bi.dataprovisioning.util.DBUtil.getTablesToHide(DBUtil.java:188)
at com.sap.ndb.studio.bi.filedataupload.ui.wizards.pages.SelectTableDialog.createDialogArea(SelectTableDialog.java:108)
at org.eclipse.jface.dialogs.Dialog.createContents(Dialog.java:775)
at org.eclipse.jface.window.Window.create(Window.java:432)
at org.eclipse.jface.dialogs.Dialog.create(Dialog.java:1104)
at com.sap.ndb.studio.bi.filedataupload.ui.wizards.pages.SelectTableDialog.create(SelectTableDialog.java:186)
at com.sap.ndb.studio.bi.filedataupload.ui.wizards.pages.ImportFileSelectionWizardPage$14.widgetSelected(ImportFileSelectionWizardPage.java:779)
at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:248)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1057)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:4170)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3759)
at org.eclipse.jface.window.Window.runEventLoop(Window.java:826)
at org.eclipse.jface.window.Window.open(Window.java:802)
at org.eclipse.ui.internal.handlers.WizardHandler$Import.executeHandler(WizardHandler.java:152)
at org.eclipse.ui.internal.handlers.WizardHandler.execute(WizardHandler.java:279)
at org.eclipse.ui.internal.handlers.HandlerProxy.execute(HandlerProxy.java:290)
at org.eclipse.ui.internal.handlers.E4HandlerProxy.execute(E4HandlerProxy.java:90)
at sun.reflect.GeneratedMethodAccessor33.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.eclipse.e4.core.internal.di.MethodRequestor.execute(MethodRequestor.java:56)
at org.eclipse.e4.core.internal.di.InjectorImpl.invokeUsingClass(InjectorImpl.java:243)
at org.eclipse.e4.core.internal.di.InjectorImpl.invoke(InjectorImpl.java:224)
at org.eclipse.e4.core.contexts.ContextInjectionFactory.invoke(ContextInjectionFactory.java:132)
at org.eclipse.e4.core.commands.internal.HandlerServiceHandler.execute(HandlerServiceHandler.java:167)
at org.eclipse.core.commands.Command.executeWithChecks(Command.java:499)
at org.eclipse.core.commands.ParameterizedCommand.executeWithChecks(ParameterizedCommand.java:508)
at org.eclipse.e4.core.commands.internal.HandlerServiceImpl.executeHandler(HandlerServiceImpl.java:213)
at org.eclipse.ui.internal.handlers.LegacyHandlerService.executeCommand(LegacyHandlerService.java:420)
at org.eclipse.ui.internal.actions.CommandAction.runWithEvent(CommandAction.java:157)
at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionItem.java:584)
at org.eclipse.jface.action.ActionContributionItem.access$2(ActionContributionItem.java:501)
at org.eclipse.jface.action.ActionContributionItem$5.handleEvent(ActionContributionItem.java:411)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1057)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:4170)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3759)
at org.eclipse.e4.ui.internal.workbench.swt.PartRenderingEngine$9.run(PartRenderingEngine.java:1113)
at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
at org.eclipse.e4.ui.internal.workbench.swt.PartRenderingEngine.run(PartRenderingEngine.java:997)
at org.eclipse.e4.ui.internal.workbench.E4Workbench.createAndRunUI(E4Workbench.java:138)
at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:610)
at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:567)
at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:150)
at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:124)
at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:354)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:181)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:636)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:591)
at org.eclipse.equinox.launcher.Main.run(Main.java:1450)
at org.eclipse.equinox.launcher.Main.main(Main.java:1426)
I'm sure many of you have come across this before. Any help will be much appreciated.
Thanks in advanceHello Akhtar,
Have you tryed to delete the heador row from your file?
I received the same error when loading a csv file, but when I delete the heador row it worked.
Best Regards,
Juliana Genova -
Dear all,
i have a Windows 2008 Server (X64) with SQL 2005 SP3 and some troubels...
The SQL works since some week, this week we installed SQL SP3 and change of the local Admin password.
Yesterday we reboot the Server, now the SQL Server Agent is unable to start!
The SQL Server is up and running,
Errorlog:
2009-11-06 09:49:52.56 Server Microsoft SQL Server 2005 - 9.00.4035.00 (X64)
Nov 24 2008 16:17:31
Copyright (c) 1988-2005 Microsoft Corporation
Standard Edition (64-bit) on Windows NT 6.0 (Build 6002: Service Pack 2)
2009-11-06 09:49:52.56 Server (c) 2005 Microsoft Corporation.
2009-11-06 09:49:52.56 Server All rights reserved.
2009-11-06 09:49:52.56 Server Server process ID is 5912.
2009-11-06 09:49:52.56 Server Authentication mode is WINDOWS-ONLY.
2009-11-06 09:49:52.56 Server Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG'.
2009-11-06 09:49:52.56 Server This instance of SQL Server last reported using a process ID of 4424 at 11/6/2009 9:43:23 AM (local) 11/6/2009 8:43:23 AM (UTC). This is an informational message only; no user action is required.
2009-11-06 09:49:52.56 Server Registry startup parameters:
2009-11-06 09:49:52.56 Server -d C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\DATA\master.mdf
2009-11-06 09:49:52.56 Server -e C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG
2009-11-06 09:49:52.56 Server -l C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\DATA\mastlog.ldf
2009-11-06 09:49:52.59 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2009-11-06 09:49:52.59 Server Detected 4 CPUs. This is an informational message; no user action is required.
2009-11-06 09:49:52.67 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2009-11-06 09:49:52.71 Server Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2009-11-06 09:49:53.73 Server Attempting to recover in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2009-11-06 09:49:53.73 Server Database mirroring has been enabled on this instance of SQL Server.
2009-11-06 09:49:53.73 spid4s Starting up database 'master'.
2009-11-06 09:49:53.86 spid4s Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2009-11-06 09:49:53.95 spid4s SQL Trace ID 1 was started by login "sa".
2009-11-06 09:49:53.97 spid4s Starting up database 'mssqlsystemresource'.
2009-11-06 09:49:53.99 spid4s The resource database build version is 9.00.4035. This is an informational message only. No user action is required.
2009-11-06 09:49:54.16 spid9s Starting up database 'model'.
2009-11-06 09:49:54.17 spid4s Server name is 'VIE-EU-ARC-02'. This is an informational message only. No user action is required.
2009-11-06 09:49:54.19 Server The certificate was successfully loaded for encryption.
2009-11-06 09:49:54.19 Server Server is listening on [ 'any' <ipv6> 1433].
2009-11-06 09:49:54.19 Server Server is listening on [ 'any' <ipv4> 1433].
2009-11-06 09:49:54.19 Server Server local connection provider is ready to accept connection on [ \\.\pipe\SQLLocal\MSSQLSERVER ].
2009-11-06 09:49:54.19 Server Server local connection provider is ready to accept connection on [ \\.\pipe\sql\query ].
2009-11-06 09:49:54.19 Server Server is listening on [ ::1 <ipv6> 1434].
2009-11-06 09:49:54.19 Server Server is listening on [ 127.0.0.1 <ipv4> 1434].
2009-11-06 09:49:54.19 Server Dedicated admin connection support was established for listening locally on port 1434.
2009-11-06 09:49:54.31 Server SQL Server is now ready for client connections. This is an informational message; no user action is required.
2009-11-06 09:49:54.33 spid15s Starting up database 'AdventureWorks'.
2009-11-06 09:49:54.33 spid16s Starting up database 'EnterpriseVaultDirectory'.
2009-11-06 09:49:54.33 spid14s Starting up database 'Test'.
2009-11-06 09:49:54.33 spid12s Starting up database 'AdventureWorksDW'.
2009-11-06 09:49:54.33 spid17s Starting up database 'EnterpriseVaultMonitoring'.
2009-11-06 09:49:54.33 spid13s Starting up database 'msdb'.
2009-11-06 09:49:54.33 spid23s Starting up database 'EVVSExchangeVaultStore_2'.
2009-11-06 09:49:54.33 spid22s Starting up database 'EVVSGVIE_2_2'.
2009-11-06 09:49:54.33 spid24s Starting up database 'EVVSJournalVaultStore_3'.
2009-11-06 09:49:54.33 spid19s Starting up database 'EVVSVIEIT_1'.
2009-11-06 09:49:54.33 spid21s Starting up database 'ReportServerTempDB'.
2009-11-06 09:49:54.33 spid20s Starting up database 'ReportServer'.
2009-11-06 09:49:54.33 spid18s Starting up database 'EVVSGVIEIT_1_1'.
2009-11-06 09:49:54.56 spid9s Clearing tempdb database.
2009-11-06 09:49:54.61 spid19s CHECKDB for database 'EVVSVIEIT_1' finished without errors on 2009-10-28 18:06:14.107 (local time). This is an informational message only; no user action is required.
2009-11-06 09:49:54.65 spid23s CHECKDB for database 'EVVSExchangeVaultStore_2' finished without errors on 2009-11-04 18:05:33.960 (local time). This is an informational message only; no user action is required.
2009-11-06 09:49:54.71 spid24s CHECKDB for database 'EVVSJournalVaultStore_3' finished without errors on 2009-11-04 18:05:51.793 (local time). This is an informational message only; no user action is required.
2009-11-06 09:49:54.75 spid16s CHECKDB for database 'EnterpriseVaultDirectory' finished without errors on 2009-11-04 18:06:38.103 (local time). This is an informational message only; no user action is required.
2009-11-06 09:49:54.83 spid17s CHECKDB for database 'EnterpriseVaultMonitoring' finished without errors on 2009-11-04 18:06:18.570 (local time). This is an informational message only; no user action is required.
2009-11-06 09:49:54.99 spid4s Recovery of any in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC) has completed. This is an informational message only. No user action is required.
2009-11-06 09:49:55.55 spid9s Starting up database 'tempdb'.
2009-11-06 09:49:55.68 spid4s Recovery is complete. This is an informational message only. No user action is required.
2009-11-06 09:49:55.68 spid12s The Service Broker protocol transport is disabled or not configured.
2009-11-06 09:49:55.68 spid12s The Database Mirroring protocol transport is disabled or not configured.
2009-11-06 09:49:55.72 spid12s Service Broker manager has started.
Only the SQL Server Agent is unable to start,
Eventlog:
Log Name: Application
Source: SQLSERVERAGENT
Date: 06.11.2009 10:09:52
Event ID: 103
Task Category: Service Control
Level: Error
Keywords: Classic
User: N/A
Computer: vie-eu-arc-02.global.domain
Description:
SQLServerAgent could not be started (reason: Unable to connect to server '(local)'; SQLServerAgent cannot start).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="SQLSERVERAGENT" />
<EventID Qualifiers="16384">103</EventID>
<Level>2</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2009-11-06T09:09:52.000Z" />
<EventRecordID>8486</EventRecordID>
<Channel>Application</Channel>
<Computer>vie-eu-arc-02.global.domain</Computer>
<Security />
</System>
<EventData>
<Data>Unable to connect to server '(local)'; SQLServerAgent cannot start</Data>
</EventData>
</Event>
SQLAgent.out Logfile:
2009-11-06 10:09:52 - ! [298] SQLServer Error: 233, Shared Memory Provider: No process is on the other end of the pipe. [SQLSTATE 08001]
2009-11-06 10:09:52 - ! [298] SQLServer Error: 233, Client unable to establish connection [SQLSTATE 08001]
2009-11-06 10:09:52 - ! [000] Unable to connect to server '(local)'; SQLServerAgent cannot start
2009-11-06 10:09:52 - ! [298] SQLServer Error: 233, Shared Memory Provider: No process is on the other end of the pipe. [SQLSTATE 08001]
2009-11-06 10:09:52 - ! [298] SQLServer Error: 233, Client unable to establish connection [SQLSTATE 08001]
2009-11-06 10:09:52 - ! [382] Logon to server '(local)' failed (DisableAgentXPs)
2009-11-06 10:09:53 - ? [098] SQLServerAgent terminated (normally)
Additional the SQL Server Management Studio is unable to logon to the Server:
TITLE: Connect to Server
Cannot connect to vie-eu-arc-02.
ADDITIONAL INFORMATION:
A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) (Microsoft SQL Server, Error: 233)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=233&LinkId=20476
The local Admin Password was reset to the "original" (after install) one.
Any ideas how to fix the problem?Dear all,
the encryption was NO on all protocols.
Because no additional ideas available, i uninstalled the SQL Server on friday.
At the Re-Install Process i got again an error:
[Microsoft][SQL Native Client]Shared Memory Provider: No process is on the
other end of the pipe .
The install process failed.
On google i found the same problem in an other thread:
http://groups.google.com/group/microsoft.public.sqlserver.connect/browse_thread/thread/dbec4a9a271f69a6/7cd22694da3a6062?lnk=st&q=%22Shared+Memory+Provider%3A+No+process+is+on+the+other+end+of+the+pipe%22&rnum=2&hl=en#7cd22694da3a6062
++++++
During the installation process of SQL Server 2005, Setup complains it cannot
connect to the database service for server configuration. The error was:
[Microsoft][SQL Native Client]Shared Memory Provider: No process is on the
other end of the pipe .
I have checked that the pipe exists (\\.\pipe\SQLLocal\MyInstance), but
everytime the installer attempts the connecting the pipe is closed by the
server and another is reopened. That's why the Client says there is no
process on the other end of the pipe.
I have re-installed 'everything', tried connections via TCP, but nothing
works.
I have made a small application to connect to the pipe and noticed that
there are 3 instances of the pipe running, one that I am connecting to, and 2
listening pipes. If I write to 'my' pipe SQL server disconnects the pipe and
reopens another too. The difference is that SQL server writes an error
message in the log file. No such luck when the Native client is doing the
same.
What more can I do?
++++++
and an answer
++++++
I finaly found the problem to be the certificate used.
I noticed that a certificate was added to the machinekeys just recently.
(in C:\Documents and Settings\All Users\Application
Data\Microsoft\Crypto\RSA\MachineKeys)
I renamed it to another name and re-installed sql server.
I noticed that sql server ERRORLOG complained about certificate that it
couldn't load and the generation of a self-generaed certificate (see below)
"2005-12-10 21:01:02.30 Server The server could not load the
certificate it needs to initiate an SSL connection. It returned the following
error: 0x8009030d. Check certificates to make sure they are valid.
2005-12-10 21:01:02.49 Server A self-generated certificate was
successfully loaded for encryption."
Now the installation succeeded
++++++
With Windows 2008 it was really a challange to get access to this folder (!!!)
After clearing the folder the ReInstall of SQL Server works fine.
Now the SQL Server & the SQL Server Agent works again.
The problem was anything with encryption, old certs & files.
I don't think that everyone can afford reinstalling SQL server.
I finaly found the problem to be the certificate used.
I noticed that a certificate was added to the machinekeys just recently.
(in C:\Documents and Settings\All Users\Application
Data\Microsoft\Crypto\RSA\MachineKeys)
I think this is what the following blog was saying , a problem with certification
http://blogs.msdn.com/sql_protocols/archive/2006/07/26/678596.aspx
Cheers
Please mark as answer if you think this answers your questions -
I have around 400,000 photos of 15 years so given the high number, I organized all my photos into 6 catalogs to avoid potential problems. All the photos and the catalogs are in a 4TB Seagate external hard drive. I use Adobe Lightroom 5 and I use a PC with the latest Windows Office 2013.
I wanted to have a NEW Catalog of all my rated 1 Star+ photos of all the years in a single Catalog. So I created what I called Star+ Catalog and I was told the best option is to import a Catalog at a time and given that there is no means to filter importing only Stared photos, I would import all the photos and then delete all the UnStared photos. I did that for Catalog Year 2014 but at the end gave me the message: "lightroom could not import this catalog because of an unknown error". It actually had imported around 40k photos from about 50k total. I tried again and again and every time I end up with the same thing. I created another new Catalog and stared from scratch and the same ting happened: the ONLY EXACT 40k or so photos were imported and the rest were not!! When I imported Catalog Year 2013 of around 45k photos, it worked perfectly. But when I imported Catalog Year 2012 of 35k photos, the same thing happened!!
I then tried exporting the needed photos to a new Catalog and that worked. But then when I try to import them again from my Master *+ Catalog I get the same error again!!
I also tried creating a new Master *+ Catalog and tried to import the Catalogs of each year into it and the same error happened again!!!
Any advice: 1) on how to solve this? and 2) if there is a better and easier way to create this Master Catalog of All Stared Photos of All my Catalogs?This is a duplicate thread - see here
-
Getting "Could not Import Universe" error while trying to refresh a Report
Hi,
When we are trying to refresh a report in ZABO in production environment, we are getting an error "Could not import universe".
We are able to import all other universes and refresh all other reports thru ZABO.
Even these reports that are dependent on this universe are getting refreshed in Infoview and Full client. We are continuously facing this issue in ZABO.
We tried the following steps but it did not fix the problem.
1) Go to Tools -> Universes; Select the Universe to be imported and click on "Import" - Result: An error stating "Cannot find Universe".
Click on "Refresh" button and then on "Import" again.
Still the same error " Cannot find Universe"
2) Click on "Data manager" after opening the report. Go to 'Definition' tab -> click on "..." - Result: "Cannot find Universe" error.
3) Go to C:\Documents and Settings\<user name>\Application Data\Business Objects\Business Objects 6.0\lsi\
Take a backup of .rkey and .lsi files of our gateway server and delete them from that location.Then relogin Infoview and ZABO.
4)Go to Internet Options -> Temporary File Settings -> View Objects.
Delete RptViewerAX class and ZaboCheckandRunControl class and relogin infoview and ZABO.
5) Tried creating a new Document based on that Universe.
6)Publish the universe with a different name and try creating a report based on that.
None of these trials worked out. Please help us to fix this issue.
Note: Our Production environment is reverse proxy enabled that has a time out set to 15 mins at webintelligence level. The Error is being observed with in 2 mins from the refresh process started.
Regards
ChaitanyaHi,
Go to CMC, and check the path in file store where this Universe is stored.
Follow this path and check if this universe is present there.
If you have a local copy, you could open and export this by changing the name and try re-pointint one of the reports.
If it works, you could delete the original and rename it to the original Universe.
Regards,
Jayendra. -
SQL Server: 2008 R2 SP2
Before describing my problem, I have gone via the forum, there is no view or functions inside my stored procedure
When running a particular stored procedure inside crystal report, the error " Could not continue scan with nolock due to data movement" comes once every few weeks. After I clear the query cache plan, it works again for few weeks and the problem
comes again. During these few weeks, there is no restart or query plan clearing.
If I run the stored procedure inside SSMS, where the SQL statement is copied and pasted from SQL profiler during crystal report run, there is no error.
I discovered running in SSMS and crystal report generate 2 different query plans even I copied the SQL from SQL profiler, I have actually saved the query plans. Unfortunately, this forum does not accept attachments, or otherwise I will post my query plans
here.
There is one thing I notice about the query plan is during nested loop operation, there is a warning "no join predicate". I don't use any views or UDF in the statement, nor did I use pre-1992 ANSI join syntax. However, I did use table variables.
My guess is whether this will cause " Could not continue scan with nolock due to data movement", after I clear the cache, I run crystal report again, and I look at the plan again, the "nested loop no join predicate" warning is gone.
Running this stored procedure took 1 second maximum, even when this error is popping up, it pop up within 1 second.
DBCC checkdb has been run
The same stored procedure running by crystal report in a SQL 2008 (non r2) live environment has no problems, so I am thinking this is R2 specific problems.
The "nested loop no join predicate" error SQL statment is below, no views, no udf, but table variables
INSERT @ChequeAccount
SELECT PS.PaySummaryID, PS.EmployeeID, PS.CostCentreID,
(PS.GrossPay + PS.LumpSumA + PS.LumpSumB + PS.LumpSumD+ PS.LumpSumE+ PS.ETP+ PS.PaymentsAfterTax - PS.DeductionsAfterTax
- PS.Tax- PS.ETPTax + PS.TaxRebate) * -1 AS Amount,
CGLM.GLAccountID
FROM Pay_Summary PS JOIN Input_Sheet ISH ON PS.InputSheetID = ISH.InputSheetID AND ISH.PayrollID = @binPayrollID
AND PS.PaySummaryID NOT IN (SELECT PaySummaryID FROM @ChequeAccount)
JOIN Payroll P ON P.PayrollID = ISH.PayrollID AND P.EmployerID = @binEmployerID
JOIN CustomGLFixMapping CGLM ON CGLM.EmployerID = P.EmployerID AND CustomGLFixMappingNameID = 1 AND CGLM.CostCentreID IS NULLThe error Could not continue scan with nolock due to data movement can occur when you use the NOLOCK table hint, or use the command SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED. That is, so-called dirty reads. The error is not related to the
query plan per se, but when scanning a table, the storage engine will use an IAM scan rather than following the clustered index. If there is simultaneous activity, the storage engine may detect this and abort the operation to avoid returning incorrect data.
Or it may not detect it, and return uncommitted data or fail to return committed data.
All of these effects are transitory and they will not show up when you are alone on the system, only when there is concurrent activity in one or more of the tables in the query.
Using dirty reads is a risky business for the reasons explained above, and it takes careful analysis to understand whether you can live with the errors you can get from a particular query. The error about data movement can be handled: trap the error and
resubmit the query. But what about spurious incorrect results?
If you believe locking to be a problem, you should consider setting the database to READ_COMMITTED_SNAPSHOT
and take out all use of READ UNCOMMITTED/NOLOCK. When the database is in READ_COMMITTED_SNAPSHOT, readers read from the snapshot and only see committed data without blocking writers. This has some other effects like requiring a bigger tempdb,
and there is a risk for other types of concurrency errors, but they tend to be smaller risks.
I discovered running in SSMS and crystal report generate 2 different query plans even I copied the SQL from SQL profiler,
This is because SSMS by default runs with SET ARITHABORT ON. I discuss this in more detail in this article on my web site:
http://www.sommarskog.se/query-plan-mysteries.html
However, as I said, this problem is not related to the query plan as such, although some query plans are more susceptible to this error than others. (All plans are suscpeitble to produce incorrect results).
Erland Sommarskog, SQL Server MVP, [email protected] -
I have around 400,000 photos of 15 years so given the high number, I organized all my photos into 6 catalogs to avoid potential problems. All the photos and the catalogs are in a 4TB Seagate external hard drive. I use Adobe Lightroom 5 and I use a PC with the latest Windows Office 2013.
I wanted to have a NEW Catalog of all my rated 1 Star+ photos of all the years in a single Catalog. So I created what I called Star+ Catalog and I was told the best option is to import a Catalog at a time and given that there is no means to filter importing only Stared photos, I would import all the photos and then delete all the UnStared photos. I did that for Catalog Year 2014 but at the end gave me the message: "lightroom could not import this catalog because of an unknown error". It actually had imported around 40k photos from about 50k total. I tried again and again and every time I end up with the same thing. I created another new Catalog and stared from scratch and the same ting happened: the ONLY EXACT 40k or so photos were imported and the rest were not!! When I imported Catalog Year 2013 of around 45k photos, it worked perfectly. But when I imported Catalog Year 2012 of 35k photos, the same thing happened!!
Any advice: 1) on how to solve this? and 2) if there is a better and easier way to create this Master Catalog of All Stared Photos of All my Catalogs?OK, my starting point is that LR can happily contain 400000+ photos, and it's a mistake to create a 1 star plus catalogue as you suggest. Instead, I'd recommend you create a master catalogue of all your photos, which you can then query however you want - 2 star, or a certain keyword, or with "xyz" in the title etc.
If you are intent on going that way, you could try a slight change from what you've done so far. Instead of trying to import an entire catalogue and then delete no-star pictures, take the 2014 and 2012 catalogues and select only the 1 star photos. Then do an Export as Catalog for these items, and import the 2014-1star and 2012-1star into your new catalogue. That may get you past the problem images which I suspect are the problem.
If that doesn't work, or if you follow my initial advice, you're going to need to identify the image where the failure occurs. You may have a corrupt image file, and replacing it from your backup may be sufficient to resolve the problem. Alternatively, it may be a corrupt record in the catalogue, and in this case it may be sufficient to remove the image from the catalogue and import it again. You might try selecting everything in the 2014 catalogue and seeing if you can do an Export as Catalog, creating a clean 2014, and deleting 2014's previews folder might also get rid of a potential problem. Something else is to try the Export as Catalog for images 1-40000, then a second Export as Catalog for images 40002-50k.
So a few things you'll need to try, rather than a magic bullet, and a recommendation to change the underlying direction.
John -
When synching by 4th gen ipod touch it skips the first step - backup-, does steps 2 through 5, then I get a message the ipod could not be backed up because a session could not be started with the ipod. How do I fix this? Do I have to restore my ipod? Will all my apps be erased?
You have to have an internet connection, either wireless or through a computer with iTunes. When you choose Software Update you can only update to the latest version for your iPod Touch, iOS 6.1.6
-
Import table with a different table name!
Dear All,
I have backup all users in my database using exp command.
Now i want to import 2 tables from this backup, as tables already exists i want to import table with different table name.
Is it possible with exp command? If not what else is the solution.
Thanks, ImranHi..
Now i want to import 2 tables from this backup, as tables already exists i want to import table with different table name.Is it possible with exp command? If not what else is the solution.
>
Well, its not possible.You can import those two tables in some test database, rename them and then take the export and import in the database you want.
Or,
You can import those 2 tables in some other schema in your database, rename them again take the export and them import it.
Anand -
"Could not create renderer with alias..." after deploying ResourceRenderer
Hello everybody
I've developed a custom ResourceRenderer class that looks like this:
package no.expert.portal.km.relateddocs;
import com.sapportals.htmlb.Component;
import com.sapportals.htmlb.Link;
import com.sapportals.wcm.WcmException;
import com.sapportals.wcm.rendering.resource.cm.ResourceRenderer;
import com.sapportals.wcm.repository.IResource;
public class RelatedDocsNamePropertyRenderer extends ResourceRenderer
protected Component renderContentLink(com.sapportals.htmlb.Component comp) throws WcmException
Link result = (Link) super.renderContentLink(comp);
result.setTarget("");
return result;
protected Component renderContentLink(IResource resource, com.sapportals.htmlb.Component comp) throws WcmException
Link result = (Link)super.renderContentLink(resource, comp);
result.setTarget("");
return result;
All it does, really, is preventing links to documents in KM to open in a new window. At least that's what I'm hoping it will do, as it's based on ideas in <a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=20316">this post</a>.
I've added all the necessary .jar files, and implemented a wrapper portal service as described here: <a href="http://media.sdn.sap.com/html/submitted_docs/nw_kmc/ide/projects/Setting%20Up%20a%20KMC%20Project.html">http://media.sdn.sap.com/html/submitted_docs/nw_kmc/ide/projects/Setting%20Up%20a%20KMC%20Project.html</a>.
I've created an alias for the class in <i>Content Management -> User Interface -> Mapping</i>, and assigned this to the resource renderer settings that I use.
OK, here is where the trouble starts. When viewing the layout set with debugging on, I check <i>Rendering Information</i>. It informs me that <i>"The given configuration was not used, because the alias is not defined or points to an invalid java class"</i>. Looking in the log, this is the error message:
Could not create renderer with alias ZRelatedDocsNameResourceRender and classname no.expert.portal.km.relateddocs.RelatedDocsNamePropertyRenderer:java.lang.NoClassDefFoundError: com/sapportals/wcm/rendering/resource/cm/ResourceRenderer
------------------------- Loader Info -------------------------
ClassLoader name: [com.sapportals.portal.prt.util.ApplicationClassLoader@6b247b]
Parent loader name: [com.sapportals.portal.prt.util.ApplicationClassLoader@4e82c4]
References:
not registered!
Resources:
C:usrsapEPUJC00j2eeclusterserver0appssap.comirjservlet_jspirjrootWEB-INFportalportalappsno.expert.portal.km.relateddocs.RelatedDocsNamePropertyRendererprivatelibno.expert.portal.km.relateddocs.RelatedDocsNamePropertyRenderercore.jar
The error occurred while trying to load "no.expert.portal.km.relateddocs.RelatedDocsNamePropertyRenderer".
at com.sap.engine.frame.core.load.ReferencedLoader.loadClass(ReferencedLoader.java:389)
I have a suspicion this might have something to do with the SharingRefernce in portalapp.xml, but after experimenting with different values, I'm no nearer a solution. Any ideas, anyone? Any help greatly appreciated.
-martin
Yes, and here is my portalapp.xml:
<?xml version="1.0" encoding="utf-8"?>
<application>
<application-config>
<property name="SharingReference" value="com.sap.netweaver.bc.crt,knowledgemanagement"/>
<property name="PrivateSharingReference" value="com.sap.km.cm.ui.flex"/>
</application-config>
<components>
<component name="RelatedDocsNamePropertyRenderer">
<component-config>
<property name="ClassName" value="no.expert.portal.km.relateddocs.RelatedDocsNamePropertyRenderer"/>
</component-config>
<component-profile/>
</component>
</components>
<services>
<service name="BootStrapNamePropertyRender">
<service-config>
<property name="className" value="no.expert.portal.km.relateddocs.BootStrapNamePropertyRender"/>
<property name="startup" value="true"/>
</service-config>
</service>
</services>
</application>Hi Gourab,
Double check the the page.xml has referring to the correct CO. Open the page.xml and see which controller is attached to it.
Also attach the extended controller through personalization to the page/Region.
Thanks
--Anil -
Unable to start SQL Agent SQL Server 2008 R2 RTM OS: Windows 2008 R2
Agent Log
2012-04-17 22:17:22 - ! [298] SQLServer Error: 27, Registry information is corrupt or missing. Make sure the provider installed and registered correctly. [SQLSTATE 08001]
2012-04-17 22:17:22 - ! [298] SQLServer Error: 27, Client unable to establish connection [SQLSTATE 08001]
2012-04-17 22:17:22 - ! [165] ODBC Error: 0, A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to
allow remote connections. For more information see SQL Server Books Online. [SQLSTATE 08001]
2012-04-17 22:17:22 - ! [000] Unable to connect to server '(local)'; SQLServerAgent cannot start
2012-04-17 22:17:22 - ! [298] SQLServer Error: 27, Registry information is corrupt or missing. Make sure the provider installed and registered correctly. [SQLSTATE 08001]
2012-04-17 22:17:22 - ! [298] SQLServer Error: 27, Client unable to establish connection [SQLSTATE 08001]
2012-04-17 22:17:22 - ! [165] ODBC Error: 0, A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to
allow remote connections. For more information see SQL Server Books Online. [SQLSTATE 08001]
2012-04-17 22:17:22 - ! [382] Logon to server '(local)' failed (DisableAgentXPs)
2012-04-17 22:17:23 - ? [098] SQLServerAgent terminated (normally)
EventLog:
SQLServerAgent could not be started (reason: Unable to connect to server '<ServerNAme>'; SQLServerAgent cannot start).
TITLE: Microsoft SQL Server Management Studio
Unable to start service SQLSERVERAGENT on server <Server Name>. (mscorlib)
ADDITIONAL INFORMATION:
The SQLSERVERAGENT service on <Server Name> started and then stopped. (ObjectExplorer)
BUTTONS:
OK
Uninstalled couple of times and Reinstall still getting the same Error and also tried below workarounds:
sp_configure 'show advanced options', 1;
GO
RECONFIGURE;
GO
sp_configure 'Agent XPs', 1;
GO
RECONFIGURE
GO
[HKLM\SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\SQLServerAgent] PATH is Correct
Can you please share with you if have any fix for this issue.
Note: Services are running under service account [Domain Account] and also has SA privilage.
Thanks
Nag
Nag Pal MCTS/MCITP (SQL Server 2005/2008) :: Please Mark Answer/vote if it is helpful ::Hi Nagpal,
Just thinking if you can try to Reparing the Native Client setup and see if it works.
Also if SQL Server Agent account is a domain account (and not as of SQL Server Engine) then try to check if it has below permissions (via Local Policies of the server) also does it has Local Machine Admin permission:
Act as part of the operating system
Adjust memory quotas for a process
Bypass traverse checking
Log on as a batch job
Log on as a service
Replace a process level token
Regards Gursethi Blog: http://gursethi.blogspot.com/ ++++ Please mark "Propose As Answer" if my answer helped ++++ -
I'm trying to use FaceTime on my new iPad but I keep getting this message could not sign in check your network connection.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Cheers, Tom
Maybe you are looking for
-
F4IF_INT_TABLE_VALUE_REQUEST Functionality
Hello all, How can I return more then one value using the FM F4IF_INT_TABLE_VALUE_REQUEST. Example: Parameters: pernr TYPE pa0001-pernr, sname TYPE pa0001-sname. When I click "F4" inside the field (parameter) pernr, the following list is showed... Nu
-
been sat here for the past 5 hours trying to figure out why itunes wont download, it says error and something to do with Microsoft version? Help me please.. getting a bit bored?
-
Getting iTunes app onto iphone 4s?
I used iTunes to download an app but don't know how to get it on my new iphone 4s. How do I do this? Thanks!
-
Hi all, I am new to EDI Idocs and want to know more about it. Please tell me about related sites and please forward me the important documents in my id [email protected] It will be very helpful for me. Please experts help me. With regards, Abir.
-
This is the second occurrance of this similar issue. During routine updates to the OS, once the up2date finished, the nodes were rebooted. Everthing came up fine and crsstat showed everything was online. About 20 minutes later I issued an OCRCHECK, j