Could not initiate SSL connection when DS is launched from Eclipse

Hello,
I am wondering whether anyone has faced this issue connecting to the BIP with https when Design Studio is launched from the Eclipse IDE.
The URL is something like : https://myservername.domain.net/dswsbobje/services/Session
We get the following error message when entering the URL : "Could not initiate SSL connection. Check the Web Service Url"
However, when Design Studio is launched directly, the same URL works fine and we can connect to the BIP normally.
I would imagine something is missing in the Eclipse configuration or there is an issue elsewhere. I did not find anything relevant in the SDK guide.
We checked the following SAP notes :
1807142 - How to enable HTTPS/SSL Designer against BIP
-> Web service configured properly, the URL works fine and it works when Design Studio is started without Eclipse
1975475 - Unable to select authentication method in BIP logon dialog of SAP Design Studio
Tried the solution : set to Direct. Tried to remove proxy entries in IE. No improvement. Also, I tried to set the connectivity to Direct in the Eclipse. But, no luck.
Software :
Design Studio 1.2 SP01 + SDK 1.2 SP01
BI 4.0 SP06
Java EE IDE (Kepler) Version: 2.0.1.20130919-0803
Java JRE 1.6.0.35. It's old, I know...
Thanks in advance.
Joel

Hi Joel,
any progress?
do you use a self signed certficate?
Kind regards
Frank

Similar Messages

"could not start print job" when printing to PDF from Lightroom

Any body else had this problem and fixed it?? When I print from Lightroom to Adobe PDF I get "could not start print job" and the print job hangs.
I have:
Lightroom 2.5 64 bit
Acrobat Standard 9
Windows 7 Ultimata 64bit but I had this problem with Vista 64 bit. Somtimes it would work sometimes not - now with Windows 7 Not - always.
I can print to acrobat from every other application, even Photoshop CS3 - just not Lightroom.
It's terribly frustrating. Any help would be greatly appreciated.
Ken

Andrew,
I can print from other apps, just printed a doc from open office.
OS Windows 8.1. Have been printing from this computer and setup previously, it seems to have been an intermitent problem that has now become a consistent problem.
I've updated the printer firmware, and Windows is up to date.
Seems to be a lightroom issue, and I'm getting a bit nervous because I have a show opening on February 15th I need to print for.

Top Link error 17002 The Network Adapter could not establish the connection

I have installed an application developped in an another environnement.
I have created the database schema in my own database.
I have created a database connection to this schema.
I have reconciled the schema using this connection (so the database and the connection are available and correct from jdeveloper)
I have updated the Mapping to use the new connection and new generated the mapping status report without any errors
and i still have this error ! The Network Adapter could not establish the connection when i access any jsp document containing data from the database.
I check and recheck everything and all is correct ... sure something is wrong somewhere ... where is the question ...

Sorry I think you didn't read the thread or you read it too fast !
I'm not a beginner and I know what the problem is but all the settings are correct in jdev and the database and the listener are running ... i'm able to browse the tables, seeing data reconciling objects with the database connection referenced in the top link descriptor
It seem that top link is using something else and i don't understand from where it took the connection description.

SQLDeveloper: The Network Adapter could not establish the connection

I have installed 10.2.0g and am getting the following error 'The Network Adapter could not establish the connection' when testing a new connection in SQLDeveloper.
I also have 11g installed and can connect successfully on a different port.
How can i successfully connect to my recently installed 10.2.0g database please?
many thanks

As long as u r using the TNS entry, the issue cant lie in the environment variables. It would be true only if you trying to establish a direct connection on the same server.
1. Pls check the tnsping using the tns entry.
2. Check if the listener status has the database sid name registered. The issue might be simply with the listener alone.

Failed to start Share could not initiate desktop share

we have calabrio QM recording as well as jabber running. we record their desktop with calabrio. however when we have a user that tries to initiate a desktop share with jabber it gives us the error "Failed to start Share could not initiate desktop share" when i stop the desktop monitoring and recording service from calabrio it works. i thought that there might be some port overlap but they have alot of ports that are open to chose form and i find that hard to believe.
i have been told that if calabrio and jabber use the same remote assistance windows api they will never work in harmony. Does anyone know if jabber uses the remote assistance api to for screen sharing?

This problem is not isolated to the Broadcom adapter. However, based on several inquiries, we list the following instructions based on other customers successfully working around this issue:
Place the Broadcom driver files in the original image folder (the image folder created when risetup.exe was executed for the first time).
Example: i:\RemoteInstall\Setup\English\Images\(Original Image)
Place the Broadcom driver files in the i386 subfolder under the original image folder
Example: i:\RemoteInstall\Setup\English\Images\(Original Image)\i386
Place the Broadcom driver files for the network adapter in the RIPREP Image folder.
Example: i:\RemoteInstall\Setup\English\Images\(RIPREP Image)
Place the Broadcom adapter drivers in the i386 subfolder where the RIPREP Image is located.
Example: i:\RemoteInstall\Setup\English\Images\(RIPREP Image)\i386
The Microsoft Knowledge base articles listed below were used as a reference for the following instructions:
http://support.microsoft.com/default.aspx?scid=kb;EN-US;254078
http://support.microsoft.com/default.aspx?scid=kb;EN-US;246184
Found this on -
https://www.broadcom.com/support/ethernet_nic/faq_drivers.php
I don't know if this will help, looks really old, about as old as the network card :)

HT204400 I used my apple tv wirelessly and it worked fine,then I plugged an Ethernet wire into the Apple TV to move it and could not it to connect. When I unplugged Ethernet wire it will not give me a wireless option. How do I get that back?

I used my apple tv wirelessly and it worked fine,then I plugged an Ethernet wire into the Apple TV to move it and could not it to connect. When I unplugged Ethernet wire it will not give me a wireless option. How do I get that back?

If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    1.    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    2.    Connect the micro USB cable to the Apple TV and to your computer.
    3.    Reconnect the power cable (only for Apple TV 3)
    4.    Open iTunes.
    5.    Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device)

An alert message pops up upon opening saying could not initiate application security component, and it says to check to see if profile has no read/write restrictions.

An alert message pops up upon opening saying could not initiate application security component, and it says to check to see if profile has no read/write restrictions. Than when it opens all of my saved passwords are gone, I use a master password and its disabled. When I try to enter in a new on e it says can't change password. I can't even open yahoo e-mail says that my ssl security is down but when I check it its clicked. I'm just very confused as to whats going on.
== This happened ==
Every time Firefox opened
== 5/14/2010 ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.1.249.1064 Safari/532.5

See [[Could not initialize the browser security component]]
Rename (or delete) secmod.db (secmod.db.old) in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder] in case there is a problem with the file.

Itunes messages "Could not enable ssl"

When I connect my iPhone, I get lots of "could not enable ssl" messages in the message log. However, sync does work. The sender pid is [0x0-0x7c07c].com.apple.itunses[1087]. Any idea?

Some more information on your computer might help you get an answer, like what Operating System you run and your software version, but also if you turn off Parental controls it sometimes solves the problem. Hope I helped!

DNS Set Up system throw as ORA-12154; TNS :could not resolve the connect id

Hi,
While i'm creating DNS set up system throws below message
unable to connect
SQLState=08004
DNS Set Up for instantclient(win32-10.2.0.4) system throw as ORA-12154; TNS :could not resolve the connect identified specified.
operationg system:xp
dir path:C:\Oracle\instantclient10_2
TNSNAMES.ORA(C:\Oracle\instantclient10_2\NetWork\ADMIN) Contants
YourTNSName =sankar
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST =localhost)(PORT =1521))
(CONNECT_DATA =
(SID =sankar)
(SERVER = DEDICATED)
dir contains:
sqresus.dll,
sqresja.dll
sqoras32.dll
sqora32.dll
oraociei10.dll
oraocci10.dll
orannzsbb10.dll
ojdbc14.jar
ocijdbc10.dll
ociw32.dll
oci.dll
classes12.jar

user7197586 wrote:
Hi
I have been created one DBLink it's created but when i am trying to access the data through the link it's raise error as
"ORA-12154: TNS:could not resolve the connect identifier specified"
CREATE
PUBLIC DATABASE LINK
Vrd_tcplink
CONNECT TO
"SAPVRD"
IDENTIFIED BY
"manager123"
USING
'VRD_TCP.WORLD'
created this above dblink
Kindly Suggest to wau out.
Regards,
Sachin
When using a dblink, the database with the link is acting as a client to the remote database ... exactly like sqlplus running on the db server.
read: http://edstevensdba.wordpress.com/2011/02/26/ora-12154tns-03505/ ora-12154tns-03505

Coherence::net::messaging::ConnectionException: could not establish a connection to one of the following addresses: {10.242.152.242/10.242.152.242:8088}; make sure the "remote-addresses" configuration element contains an address and port of a running TcpA

Hi
I have installed coheI have installed coherence server "fmw_12.1.3.0.0_coherence_Disk1_1of1.zip" along with Examples on windows machine and C++ client coherence-cpp-12.1.3.0.0b51709-windows-x86-vs2012.zip on the same machine.
I have built the "contacts" C++ Example successfully and while I execute this "contacts" using run I am facing TcpAcceptor error.
On my coherence server the TcpAcceptor is listening on port 8088, so I have modified the extend-cache-config.xml file with values "ip address of my windows machine" and port as "8088".
All the time I am getting below error,
coherence::net::messaging::ConnectionException: could not establish a connection to one of the following addresses: {10.242.152.242/10.242.152.242:8088}; make sure the "remote-addresses" configuration element contains an address and port of a running TcpAcceptor
 at class coherence::lang::TypedHandle<class coherence::component::net::extend::PofConnection> __thiscall coherence::component::util::TcpInitiator::openConne
ction(void)(TcpInitiator.cpp:307)
 at coherence::component::util::TcpInitiator::openConnection
 at coherence::component::util::Initiator::ensureConnection
 at coherence::component::net::extend::RemoteCacheService::openChannel
 at coherence::component::net::extend::RemoteService::doStart
 at coherence::component::net::extend::RemoteService::start
 at coherence::component::util::SafeService::startService
 at coherence::component::util::SafeService::restartService
 at coherence::component::util::SafeService::ensureRunningServiceInternal
 at coherence::component::util::SafeService::start
 at coherence::net::DefaultConfigurableCacheFactory::configureService
 at coherence::net::DefaultConfigurableCacheFactory::ensureService
 at coherence::net::DefaultConfigurableCacheFactory::ensureRemoteCache
 at coherence::net::DefaultConfigurableCacheFactory::configureCache
 at coherence::net::DefaultConfigurableCacheFactory::ensureCache
 at coherence::net::CacheFactory::getCache
 at unsigned __int64 coherence::lang::class_spec<class coherence::lang::Managed<class ContactId>,class coherence::lang::extends<class coherence::lang::Object,class coherence::lang::Void<class coherence::lang::Object> >,class coherence::lang::implements<void,void,void,void,void,void,void,void,void,void,void,void,void,void,void,void> >::sizeOf(bool)
 at _onexit
 at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
 at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
 at BaseThreadInitThunk
 at RtlInitializeExceptionChain
 at RtlInitializeExceptionChain
 on thread "main"
Caused by: coherence::net::messaging::ConnectionException: coherence::component::util::TcpInitiator::TcpConnection@029EAD78{Id=NULL, Open=1, LocalAddress=NULL,
RemoteAddress=10.242.152.242/10.242.152.242:8088}: socket disconnect
 at class coherence::lang::TypedHandle<class coherence::net::messaging::Response> __thiscall coherence::component::net::extend::AbstractPofRequest::Status::g
etResponse(void)(AbstractPofRequest.cpp:203)
 at coherence::component::net::extend::AbstractPofRequest::Status::getResponse
 at coherence::component::net::extend::AbstractPofRequest::Status::waitForResponse
 at coherence::component::util::Initiator::openConnection
 at coherence::component::net::extend::PofConnection::open
 at coherence::component::util::TcpInitiator::openConnection
 at coherence::component::util::Initiator::ensureConnection
 at coherence::component::net::extend::RemoteCacheService::openChannel
 at coherence::component::net::extend::RemoteService::doStart
 at coherence::component::net::extend::RemoteService::start
 at coherence::component::util::SafeService::startService
 at coherence::component::util::SafeService::restartService
 at coherence::component::util::SafeService::ensureRunningServiceInternal
 at coherence::component::util::SafeService::start
 at coherence::net::DefaultConfigurableCacheFactory::configureService
 at coherence::net::DefaultConfigurableCacheFactory::ensureService
 at coherence::net::DefaultConfigurableCacheFactory::ensureRemoteCache
 at coherence::net::DefaultConfigurableCacheFactory::configureCache
 at coherence::net::DefaultConfigurableCacheFactory::ensureCache
 at coherence::net::CacheFactory::getCache
 at unsigned __int64 coherence::lang::class_spec<class coherence::lang::Managed<class ContactId>,class coherence::lang::extends<class coherence::lang::Object
,class coherence::lang::Void<class coherence::lang::Object> >,class coherence::lang::implements<void,void,void,void,void,void,void,void,void,void,void,void,void
,void,void,void> >::sizeOf(bool)
 at _onexit
 at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
 at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
 at BaseThreadInitThunk
 at RtlInitializeExceptionChain
 at RtlInitializeExceptionChain
 on thread "main"
Caused by: coherence::io::IOException: socket disconnect
 at unsigned int __thiscall coherence::net::Socket::readInternal(unsigned char *,unsigned int)(Socket.cpp:333)
 at coherence::net::Socket::readInternal
 at coherence::net::Socket::SocketInput::read
 at coherence::io::BufferedInputStream::fillBuffer
 at coherence::io::BufferedInputStream::read
 at coherence::component::util::TcpInitiator::readMessageLength
 at coherence::component::util::TcpInitiator::TcpConnection::TcpReader::onNotify
 at coherence::component::util::Daemon::run
 at coherence::lang::Thread::run
 on thread "ExtendTcpCacheService:coherence::component::util::TcpInitiator:coherence::component::util::TcpInitiator::TcpConnection::TcpReader"

We are facing same issue. Could you please provide us any working .Net sample code for the version 12.1.2.0.
<ssl>
 <protocol>Tls</protocol>
 <local-certificates>
 <certificate>
 <url>c:\Cert\</url>
 <password>password</password>
 <flags>DefaultKeySet</flags>
 </certificate>
 </local-certificates>
 </ssl>
thanks
Bala

Named Pipes Provider: Could not open a connection to SQL Server

We are running into an error on a SQL request from SQL-IDA to the SQL-IDB server. Both servers are on Windows 2005 with MS SQL Server 2003 SP3.
OLE DB provider "SQL-IDA" for linked server "SQL-IDB" returned message "Login timeout
expired".
OLE DB provider "SQL-IDA" for linked server "SQL-IDB" returned message "An error has
occurred while establishing a connection to the server. When connecting to SQL Server 2005,
this failure may be caused by the fact that under the default settings SQL Server does not
allow remote connections.".
Msg 53, Level 16, State 1, Line 0
Named Pipes Provider: Could not open a connection to SQL Server [53].
It seems to suggest that SQL-IDA cannot find the network path to SQL-IDB. We've followed the steps in this article http://support.microsoft.com/default.aspx?scid=kb;EN-US;914277 but it did not resolve our issue. Is it possible that the MSDTC dynamic port range
should be set to a specific range on both servers?
Any help is greatly appreciated.
Albert

Hi Albert,
Can you try to use the SQL Server Management Studio on server ‘SQL-IDA’ to connect to the instance on server ‘SQL-IDB’ to see if it works or not?
There are possible reasons to error 53:
a) typo in the server name, or using "/" rather than "\" between server name and instance name, e.g. "myserver/myinst" is not correct.
b) name resolution to the server name is not correct, "ping -a yourserver" would tell if that's the case
c) The server machine is firewall'ed and file sharing is not in the exception list. You need put "File and Printer Sharing" in exception.
For more information:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server (Microsoft SQL Server, Error: XXX).
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Stephanie Lv
TechNet Community Support

Named Pipes provider, error:40 could not open a connection to sql server. Only happens on one of the front end SRS servers

when testing a datasource connection I get the following error.
Named Pipes provider, error:40 could not open a connection to sql server.
I've read all the posts on this and nothing works. This is a scale out deployment and the connection
works from the other server I have setup with SRS that is connected to the same backend SRS databases. It just doesn't work from one of the SRS front ends. I'm at a loss.. please help

Enable both named pipe and TCP communications.
Make sure client is using the same (named) pipe name as server for connection.
Kalman Toth Database & OLAP Architect
Free T-SQL Scripts
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

Reporting Services 2008 R2 configuration error: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server

Hi, I am using SQL Server 2008 R2 and on one of our dev boxes I am trying to setup ReportServer using ReportingServices Configuration manager. This is was installed longtime back and during installation they created a service account for reporting services.
When I try to configure the service account I do not get the service account created during the installation in the pull down and if I were to use something different I get this "Named Pipes Provider, error: 40 - Could not open a connection to SQL Server"
error.
Thanks in advance...........
Ione

Hi,
Take a look at this blog - http://blogs.msdn.com/b/sql_protocols/archive/2007/03/31/named-pipes-provider-error-40-could-not-open-a-connection-to-sql-server.aspx
I hope it will help.

Could not create pool connection with MySql

When starting weblogic server I obtain the following error message when the conection
pool for a MySql database should be established. What's the mistake I am doing? #The
examples in the weblogic.properties put a "server=DEMO to the props. What is this
server related to the MySql RDBMS? Is it mandatory? After the error message produced
by Weblogic you'll find some information about the MySql setup (my.ini) I have made.
Mi Mai 01 01:33:50 CEST 2002: <WebLogicServer> Invoking main-style startup weblogic.jdbc.common.internal.JdbcStartup
weblogic.jdbc.common.internal.JdbcStartup
Mi Mai 01 01:33:50 CEST 2002: <JDBC Pool> Creating connection pool ejbTestPool
with:
{aclName=weblogic.jdbc.connectionPool.ejbTestPool, maxCapacity=2, initialCapacity=1,
url=jdbc:mysql://Blizzard:3306/ejbTest, props=user=du-it;password=du-it;server=3.23.4
9-nt, capacityIncrement=1, driver=org.gjt.mm.mysql.Driver, poolName=ejbTestPool}
Mi Mai 01 01:33:50 CEST 2002: <JDBC Pool> Sleeping in createResource()
Mi Mai 01 01:33:51 CEST 2002:<E> <JDBC Pool> Failed to create connection pool "ejbTes
tPool"
weblogic.common.ResourceException: weblogic.common.ResourceException:
Could not create pool connection. The DBMS driver exception was:
java.sql.SQLException: Invalid authorization specification: Access denied for user:
du-it@blizzard' (Using password: YES)
at org.gjt.mm.mysql.MysqlIO.init(MysqlIO.java:278)
at org.gjt.mm.mysql.Connection.<init>(Connection.java:230)
at org.gjt.mm.mysql.Driver.connect(Driver.java:126)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(Connecti
onEnvFactory.java:146)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(Connecti
onEnvFactory.java:108)
at weblogic.common.internal.ResourceAllocator.makeResources(ResourceAllocator
.java:771)
at weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocator.java:4
16)
at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.java:3
30)
at weblogic.jdbc.common.internal.JdbcInfo.initPools(JdbcInfo.java:117)
at weblogic.jdbc.common.internal.JdbcInfo.startup(JdbcInfo.java:200)
at weblogic.jdbc.common.internal.JdbcStartup.main(JdbcStartup.java:11)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.t3.srvr.StartupThread.runMain(StartupThread.java:219)
at weblogic.t3.srvr.StartupThread.doWork(StartupThread.java:109)
at weblogic.t3.srvr.PropertyExecuteThread.run(PropertyExecuteThread.java:62)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(Connecti
onEnvFactory.java:154)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(Connecti
onEnvFactory.java:108)
at weblogic.common.internal.ResourceAllocator.makeResources(ResourceAllocator
.java:771)
at weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocator.java:4
16)
at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.java:3
30)
at weblogic.jdbc.common.internal.JdbcInfo.initPools(JdbcInfo.java:117)
at weblogic.jdbc.common.internal.JdbcInfo.startup(JdbcInfo.java:200)
at weblogic.jdbc.common.internal.JdbcStartup.main(JdbcStartup.java:11)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.t3.srvr.StartupThread.runMain(StartupThread.java:219)
at weblogic.t3.srvr.StartupThread.doWork(StartupThread.java:109)
at weblogic.t3.srvr.PropertyExecuteThread.run(PropertyExecuteThread.java:62)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(Connecti
onEnvFactory.java:124)
at weblogic.common.internal.ResourceAllocator.makeResources(ResourceAllocator
.java:771)
at weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocator.java:4
16)
at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.java:3
30)
at weblogic.jdbc.common.internal.JdbcInfo.initPools(JdbcInfo.java:117)
at weblogic.jdbc.common.internal.JdbcInfo.startup(JdbcInfo.java:200)
at weblogic.jdbc.common.internal.JdbcStartup.main(JdbcStartup.java:11)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.t3.srvr.StartupThread.runMain(StartupThread.java:219)
at weblogic.t3.srvr.StartupThread.doWork(StartupThread.java:109)
at weblogic.t3.srvr.PropertyExecuteThread.run(PropertyExecuteThread.java:62)
MySql:
#This File was made using the WinMySQLAdmin 1.4 Tool
#29.04.2002 14:46:57
#Uncomment or Add only the keys that you know how works.
#Read the MySQL Manual for instructions
[mysqld]
basedir=D:/db/mysql
#bind-address=169.254.102.136
datadir=D:/db/mysql/data
#anguage=D:/db/mysql/share/german
#slow query log#=
#tmpdir#=
port=3306
#set-variable=key_buffer=16M
[WinMySQLadmin]
Server=D:/db/mysql/bin/mysqld-nt.exe
user=du-it
password=du-it

When starting weblogic server I obtain the following error message when the conection
pool for a MySql database should be established. What's the mistake I am doing? #The
examples in the weblogic.properties put a "server=DEMO to the props. What is this
server related to the MySql RDBMS? Is it mandatory? After the error message produced
by Weblogic you'll find some information about the MySql setup (my.ini) I have made.
Mi Mai 01 01:33:50 CEST 2002: <WebLogicServer> Invoking main-style startup weblogic.jdbc.common.internal.JdbcStartup
weblogic.jdbc.common.internal.JdbcStartup
Mi Mai 01 01:33:50 CEST 2002: <JDBC Pool> Creating connection pool ejbTestPool
with:
{aclName=weblogic.jdbc.connectionPool.ejbTestPool, maxCapacity=2, initialCapacity=1,
url=jdbc:mysql://Blizzard:3306/ejbTest, props=user=du-it;password=du-it;server=3.23.4
9-nt, capacityIncrement=1, driver=org.gjt.mm.mysql.Driver, poolName=ejbTestPool}
Mi Mai 01 01:33:50 CEST 2002: <JDBC Pool> Sleeping in createResource()
Mi Mai 01 01:33:51 CEST 2002:<E> <JDBC Pool> Failed to create connection pool "ejbTes
tPool"
weblogic.common.ResourceException: weblogic.common.ResourceException:
Could not create pool connection. The DBMS driver exception was:
java.sql.SQLException: Invalid authorization specification: Access denied for user:
du-it@blizzard' (Using password: YES)
at org.gjt.mm.mysql.MysqlIO.init(MysqlIO.java:278)
at org.gjt.mm.mysql.Connection.<init>(Connection.java:230)
at org.gjt.mm.mysql.Driver.connect(Driver.java:126)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(Connecti
onEnvFactory.java:146)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(Connecti
onEnvFactory.java:108)
at weblogic.common.internal.ResourceAllocator.makeResources(ResourceAllocator
.java:771)
at weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocator.java:4
16)
at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.java:3
30)
at weblogic.jdbc.common.internal.JdbcInfo.initPools(JdbcInfo.java:117)
at weblogic.jdbc.common.internal.JdbcInfo.startup(JdbcInfo.java:200)
at weblogic.jdbc.common.internal.JdbcStartup.main(JdbcStartup.java:11)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.t3.srvr.StartupThread.runMain(StartupThread.java:219)
at weblogic.t3.srvr.StartupThread.doWork(StartupThread.java:109)
at weblogic.t3.srvr.PropertyExecuteThread.run(PropertyExecuteThread.java:62)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(Connecti
onEnvFactory.java:154)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(Connecti
onEnvFactory.java:108)
at weblogic.common.internal.ResourceAllocator.makeResources(ResourceAllocator
.java:771)
at weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocator.java:4
16)
at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.java:3
30)
at weblogic.jdbc.common.internal.JdbcInfo.initPools(JdbcInfo.java:117)
at weblogic.jdbc.common.internal.JdbcInfo.startup(JdbcInfo.java:200)
at weblogic.jdbc.common.internal.JdbcStartup.main(JdbcStartup.java:11)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.t3.srvr.StartupThread.runMain(StartupThread.java:219)
at weblogic.t3.srvr.StartupThread.doWork(StartupThread.java:109)
at weblogic.t3.srvr.PropertyExecuteThread.run(PropertyExecuteThread.java:62)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(Connecti
onEnvFactory.java:124)
at weblogic.common.internal.ResourceAllocator.makeResources(ResourceAllocator
.java:771)
at weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocator.java:4
16)
at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.java:3
30)
at weblogic.jdbc.common.internal.JdbcInfo.initPools(JdbcInfo.java:117)
at weblogic.jdbc.common.internal.JdbcInfo.startup(JdbcInfo.java:200)
at weblogic.jdbc.common.internal.JdbcStartup.main(JdbcStartup.java:11)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.t3.srvr.StartupThread.runMain(StartupThread.java:219)
at weblogic.t3.srvr.StartupThread.doWork(StartupThread.java:109)
at weblogic.t3.srvr.PropertyExecuteThread.run(PropertyExecuteThread.java:62)
MySql:
#This File was made using the WinMySQLAdmin 1.4 Tool
#29.04.2002 14:46:57
#Uncomment or Add only the keys that you know how works.
#Read the MySQL Manual for instructions
[mysqld]
basedir=D:/db/mysql
#bind-address=169.254.102.136
datadir=D:/db/mysql/data
#anguage=D:/db/mysql/share/german
#slow query log#=
#tmpdir#=
port=3306
#set-variable=key_buffer=16M
[WinMySQLadmin]
Server=D:/db/mysql/bin/mysqld-nt.exe
user=du-it
password=du-it

Re: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server

Hi,
I'm encountering an issue with "Named Pipes Provider, error: 40 windows" and am having problems determining how to fix it due to the environment I'm using. I have two SQL Servers installed on two separate Win2K3 Server boxes, one is SQL Server 2000 and the other is SQL Server 2005. The SQL Server 2000 contains the actual application data. The 2005 database is used only for Reporting Services. I've set up the reports on SSRS such that their datasources hit the 2000 server. This is using SQL Server authentication.
When testing the reports via SSRS (in Visual Studio 2005), the connection to the data works and the reports are generated fine. When I deploy them to the reporting server and launch IE to test locally (still on the 2005 box), I get this "Named Pipes Provider, error 40" issue. I made sure that Named Pipes and TCP were enabled and the port set at 1433 (to match that on the 2000 box).
Now I changed the datasource's authentication from SQL Server to Windows authentication. I tested this in SSRS and this works too. When I redeployed the reports with this authentication change, testing the reports via IE locally (on the 2005 box) worked. Great. Now when I open IE on an external box, i.e. on the 2000 box, and try to test the reports, I get this same error 40 issue. I've been through a few threads describing the error 40, fiddling around with the SQL Server configuration as well as SSRS, to no avail. I have a feeling this error 40 issue has to due with permissions/authentication between the SQL Server boxes but I can't really be sure. Anyone have any ideas on how to troubleshoot my situation. Thanks.
larry

Named Pipes Provider, error: 40 - Could not open a connection to SQL Server :
I. Incorrect connection string, such as using SqlExpress.
Check out: http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=558456&SiteID=17
https://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1245564&SiteID=1
The typical error when dealing with Express includes:
a. User is not aware of SqlExpress was installed as a named instance, consequently, in his/her connection string, he/she only specify ".","localhost" etc instead of ".\SqlExpress" or "<machinename>\Sqlexpress".
b. Np was disabld by default after installing SqlExpress.
c. If Sqlexpress was installed on the remote box, you need to enable remote connection for Express.
Please read the following blog for best practice of connecting to SqlExpress.
http://blogs.msdn.com/sql_protocols/archive/2006/03/23/558651.aspx
II. Named Pipes(NP) was not enabled on the SQL instance.
Check out: http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=136253&SiteID=1
Oppose to SQL 2000 which turn on all protocols, SQL 2005 SKUs turn off NP by default. So, when you see this error, please check:
1) Go to SQL Server Configuration Manager, See Server has NP enabled.
2) %windir%\program files\microsoft sql server\mssql.1\mssql\log, notepad ERRORLOG, see whether Server is listening on NP. You should see "Server named pipe provider is ready to accept connection on [ \\.\pipe\sql\query ] or [\\.\pipe\mssql$<InstanceName>\sql\query]"
3) Notice that "sql\query" is the default pipe name, so you need to know server is listening on which pipe name. eg: if you specify server pipe name is "sql\query1", then you would see in the errorlog that server listening on [ \\.\pipe\sql\query1 ], and go to SQL Server Configuration Manager, click client Named Pipe properties, see whether the pipe name is same with the one server listening on.
4) If you are using SQL Native Client ODBC/OLEDB provider({SQL Native Client} or SQLNCLI), go to SQL Configuration Manager, click client protocols, make sure NP and TCP are both enabled. Right click properties of NP, make sure client is using the same pipe name as server for connection.
5) If you are using MDAC ODBC/OLEDB({SQL Server} or SQLOLEDB) provider, in command line, launch "cliconfg.exe" and make sure NP enabled and right pipe name specified.
III. Remote connection was not enabled.
Check out: when you right click on the Server in SQL Server Management Studio, in Connections, the Remote server connections part, you have enabled the "Allow remote connections to this server" check box
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=322792&SiteID=1
https://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=763875&SiteID=1
If you are making a remote connection, namely, your target SQL Server is on the different box as client application, you might need to check whether:
a. "File and Printer Sharing" was opened in Firewall exception list.
b. Please see the blog for enabling remote connection for express and troubleshooting tips of remote connection.
http://blogs.msdn.com/sql_protocols/archive/2005/11/14/492616.aspx
http://blogs.msdn.com/sql_protocols/archive/2006/09/30/SQL-Server-2005-Remote-Connectivity-Issue-TroubleShooting.aspx
IV. Server not started, or point to not a real server in your connection string.
Check out: Open SQL Server Surface Area Configuration and ensure all the required services are started, Remote Connections are configured.
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=348662&SiteID=1
a. use "sc query mssqlserver" for default instance or "sc query mssql$<instancename>" to make sure SQL Server was started. Sometimes, reseason behind the broken of your client application w/ this error:40 might be SQL server restarted and failed, so, it'd better for you to double check.
b. User specified wrong server in their connection string, as described in the forum discussion, "MSSQLSERVER" is an invalid instance name. Remember, when you connect to default instance, <machinename> could be best representitive for the instance, when you connect to a named instance such as sqlexpress, you should specify <machinename>\<instancename> as data source in your connection string.
V. Other reasons such as incorrect security context.
Check out: http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=192622&SiteID=1
Such error also occured during user operation such as moving database or db mirroring or cluster, any DB OP that might invovle different sql instances, namely, the destination database is located in another sql instance and user is not aware of the state of the destination. I recommend you first isolate whether this fail is during connection stage or data operation stage.
a. During data operation, you are normally asked to type in the destination server name whether it is default to "(local)" or another server "<remotemachinename>". So, remember the exact string that represent the target instance, then when the error repros, open command line, use "sqlcmd -S<representitive> -E" ,see what happens, if the connection fail, please follow up above I - IV troubleshooting lists. otherwise continue.
b. If you can make basic conection, but still face the error, then there must be something that server reject the connection or client close the connection for some reason.
VI. Please try basic connectivity tests between the two mahcines you are working on. One simple way to verifty connectivity is to use command line tools, such as osql.exe. For example, osql -E -Stcpervername\instancename. If it connects cross-machine successfully, please also verify that your connection string in your scenario is correct.
Here are some blogs which could be helpful: just follow the basic connectivity troubleshooting guidelines on the SQL Protocols blog, see:
SQL Server 2005 Connectivity Issue Troubleshoot - Part I
http://blogs.msdn.com/sql_protocols/archive/2005/10/22/483684.aspx
and
SQL Server 2005 Connectivity Issue Troubleshoot - Part II
http://blogs.msdn.com/sql_protocols/archive/2005/10/29/486861.aspx
Hope this helps.

Could not initiate SSL connection when DS is launched from Eclipse

Similar Messages

Maybe you are looking for